- Users - oVirt List Archives

can't mount an export domain with 4K block size (VDO) as PosixFS (xfs)
by thomas＠hoberg.net 31 Aug '20

31 Aug '20

After this (https://devconfcz2020a.sched.com/event/YOtG/ovirt-4k-teaching-an-old-dog-ne…) I sure do not expect this (log below): Actually I am trying to evaluate just how portable oVirt storage is and this case I had prepared a USB3 HDD with VDO, which I could literally move between farms to transport VMs. Logical disks are typically large for simplicity within the VMs, QCOW2 and VDO assumed to compensate for this 'lack of planning' while the allocated storage easily fits the HDD. Once I got beyond the initial issues, I came across this somewhat unexpected issue: VDO storage uses 4k blocks all around, but evidently when you mount an export domain (or I guess any domain) as POSIX, 512byte blocks are assumed somewhere and 4k blocks rejected. I'd say that is a bug in VDSM, right? Or is there anything in the mount options to fix this? 020-08-31 18:44:40,424+0200 INFO (periodic/0) [vdsm.api] START repoStats(domains=()) from=internal, task_id=7a293dec-85b3-4b82-92b7-4e7d03b40343 (api:48) 2020-08-31 18:44:40,425+0200 INFO (periodic/0) [vdsm.api] FINISH repoStats return={'9992dc21-edf2-4951-9020-7c78f1220e02': {'code': 0, 'lastCheck': '1.6', 'delay': '0.00283651', 'valid': True, 'version': 5, 'acquired': True, 'actual': True}, '25d95783-44df-4fda-b642-55fe09162149': {'code': 0, 'lastCheck': '2.2', 'delay': '0.00256944', 'valid': True, 'version': 5, 'acquired': True, 'actual': True}, '148d9e9e-d7b8-4220-9ee8-057da96e608c': {'code': 0, 'lastCheck': '2.2', 'delay': '0.00050217', 'valid': True, 'version': 5, 'acquired': True, 'actual': True}} from=internal, task_id=7a293dec-85b3-4b82-92b7-4e7d03b40343 (api:54) 2020-08-31 18:44:41,121+0200 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call Host.ping2 succeeded in 0.00 seconds (__init__:312) 2020-08-31 18:44:41,412+0200 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC call Host.ping2 succeeded in 0.00 seconds (__init__:312) 2020-08-31 18:44:41,414+0200 INFO (jsonrpc/2) [vdsm.api] START repoStats(domains=['9992dc21-edf2-4951-9020-7c78f1220e02']) from=::1,44782, task_id=657c820e-e2eb-4b1d-b2fb-1772b3af6f32 (api:48) 2020-08-31 18:44:41,414+0200 INFO (jsonrpc/2) [vdsm.api] FINISH repoStats return={'9992dc21-edf2-4951-9020-7c78f1220e02': {'code': 0, 'lastCheck': '2.6', 'delay': '0.00283651', 'valid': True, 'version': 5, 'acquired': True, 'actual': True}} from=::1,44782, task_id=657c820e-e2eb-4b1d-b2fb-1772b3af6f32 (api:54) 2020-08-31 18:44:41,414+0200 INFO (jsonrpc/2) [jsonrpc.JsonRpcServer] RPC call Host.getStorageRepoStats succeeded in 0.00 seconds (__init__:312) 2020-08-31 18:44:41,965+0200 INFO (jsonrpc/3) [IOProcessClient] (Global) Starting client (__init__:308) 2020-08-31 18:44:41,984+0200 INFO (ioprocess/87332) [IOProcess] (Global) Starting ioprocess (__init__:434) 2020-08-31 18:44:42,006+0200 INFO (jsonrpc/3) [storage.StorageDomainCache] Removing domain fe9fb0db-2743-457a-80f0-9a4edc509e9d from storage domain cache (sdc:211) 2020-08-31 18:44:42,006+0200 INFO (jsonrpc/3) [storage.StorageDomainCache] Invalidating storage domain cache (sdc:74) 2020-08-31 18:44:42,006+0200 INFO (jsonrpc/3) [vdsm.api] FINISH connectStorageServer return={'statuslist': [{'id': '00000000-0000-0000-0000-000000000000', 'status': 0}]} from=::ffff:192.168.0.87,40378, flow_id=05fe72ef-c8ac-4e03-8453-5171e5fc5f8b, task_id=b92d4144-a9db-4423-ba6b-35934d4f9200 (api:54) 2020-08-31 18:44:42,008+0200 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC call StoragePool.connectStorageServer succeeded in 3.11 seconds (__init__:312) 2020-08-31 18:44:42,063+0200 INFO (jsonrpc/5) [vdsm.api] START getStorageDomainsList(spUUID='00000000-0000-0000-0000-000000000000', domainClass=3, storageType='', remotePath='/dev/mapper/vdo1', options=None) from=::ffff:192.168.0.87,40378, flow_id=eff548f9-b663-45dd-b8a5-5854f9b5dde8, task_id=98ca66a5-edee-40d4-9253-6a46409241cc (api:48) 2020-08-31 18:44:42,063+0200 INFO (jsonrpc/5) [storage.StorageDomainCache] Refreshing storage domain cache (resize=True) (sdc:80) 2020-08-31 18:44:42,063+0200 INFO (jsonrpc/5) [storage.ISCSI] Scanning iSCSI devices (iscsi:442) 2020-08-31 18:44:42,101+0200 INFO (jsonrpc/1) [jsonrpc.JsonRpcServer] RPC call Host.ping2 succeeded in 0.00 seconds (__init__:312) 2020-08-31 18:44:42,128+0200 INFO (jsonrpc/5) [storage.ISCSI] Scanning iSCSI devices: 0.06 seconds (utils:390) 2020-08-31 18:44:42,129+0200 INFO (jsonrpc/5) [storage.HBA] Scanning FC devices (hba:60) 2020-08-31 18:44:42,182+0200 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC call Host.ping2 succeeded in 0.00 seconds (__init__:312) 2020-08-31 18:44:42,184+0200 INFO (jsonrpc/4) [vdsm.api] START repoStats(domains=['9992dc21-edf2-4951-9020-7c78f1220e02']) from=::1,44782, task_id=7b3f1eb8-f7e3-4467-93a1-27ef9721c90c (api:48) 2020-08-31 18:44:42,184+0200 INFO (jsonrpc/4) [vdsm.api] FINISH repoStats return={'9992dc21-edf2-4951-9020-7c78f1220e02': {'code': 0, 'lastCheck': '3.4', 'delay': '0.00283651', 'valid': True, 'version': 5, 'acquired': True, 'actual': True}} from=::1,44782, task_id=7b3f1eb8-f7e3-4467-93a1-27ef9721c90c (api:54) 2020-08-31 18:44:42,184+0200 INFO (jsonrpc/4) [jsonrpc.JsonRpcServer] RPC call Host.getStorageRepoStats succeeded in 0.00 seconds (__init__:312) 2020-08-31 18:44:42,277+0200 INFO (jsonrpc/5) [storage.HBA] Scanning FC devices: 0.15 seconds (utils:390) 2020-08-31 18:44:42,309+0200 INFO (jsonrpc/5) [storage.Multipath] Resizing multipath devices (multipath:104) 2020-08-31 18:44:42,312+0200 INFO (jsonrpc/5) [storage.Multipath] Resizing multipath devices: 0.00 seconds (utils:390) 2020-08-31 18:44:42,312+0200 INFO (jsonrpc/5) [storage.StorageDomainCache] Refreshing storage domain cache: 0.25 seconds (utils:390) 2020-08-31 18:44:42,418+0200 INFO (tmap-569/0) [IOProcessClient] (_dev_mapper_vdo1) Starting client (__init__:308) 2020-08-31 18:44:42,445+0200 INFO (tmap-569/1) [IOProcessClient] (glusterSD/nucvirt.mtk.hoberg.net:_data) Starting client (__init__:308) 2020-08-31 18:44:42,449+0200 INFO (ioprocess/87496) [IOProcess] (_dev_mapper_vdo1) Starting ioprocess (__init__:434) 2020-08-31 18:44:42,457+0200 INFO (tmap-569/2) [IOProcessClient] (glusterSD/nucvirt.mtk.hoberg.net:_vmstore) Starting client (__init__:308) 2020-08-31 18:44:42,465+0200 INFO (ioprocess/87508) [IOProcess] (glusterSD/nucvirt.mtk.hoberg.net:_data) Starting ioprocess (__init__:434) 2020-08-31 18:44:42,478+0200 INFO (tmap-569/3) [IOProcessClient] (glusterSD/nucvirt.mtk.hoberg.net:_engine) Starting client (__init__:308) 2020-08-31 18:44:42,486+0200 INFO (ioprocess/87516) [IOProcess] (glusterSD/nucvirt.mtk.hoberg.net:_vmstore) Starting ioprocess (__init__:434) 2020-08-31 18:44:42,514+0200 INFO (ioprocess/87533) [IOProcess] (glusterSD/nucvirt.mtk.hoberg.net:_engine) Starting ioprocess (__init__:434) 2020-08-31 18:44:42,522+0200 INFO (jsonrpc/5) [IOProcessClient] (fe9fb0db-2743-457a-80f0-9a4edc509e9d) Starting client (__init__:308) 2020-08-31 18:44:42,553+0200 INFO (ioprocess/87552) [IOProcess] (fe9fb0db-2743-457a-80f0-9a4edc509e9d) Starting ioprocess (__init__:434) 2020-08-31 18:44:42,582+0200 ERROR (jsonrpc/5) [storage.HSM] Unexpected error (hsm:2843) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2829, in getStorageDomainsList dom = sdCache.produce(sdUUID=sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 115, in produce domain.getRealDomain() File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 51, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 139, in _realProduce domain = self._findDomain(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 156, in _findDomain return findMethod(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/nfsSD.py", line 146, in findDomain return NfsStorageDomain(NfsStorageDomain.findDomainPath(sdUUID)) File "/usr/lib/python3.6/site-packages/vdsm/storage/fileSD.py", line 390, in __init__ manifest.block_size, storage_block_size) File "/usr/lib/python3.6/site-packages/vdsm/storage/sd.py", line 939, in _validate_storage_block_size raise se.StorageDomainBlockSizeMismatch(block_size, storage_block_size) vdsm.storage.exception.StorageDomainBlockSizeMismatch: Block size does not match storage block size: 'block_size=512, storage_block_size=4096' 2020-08-31 18:44:42,582+0200 INFO (jsonrpc/5) [vdsm.api] FINISH getStorageDomainsList return={'domlist': []} from=::ffff:192.168.0.87,40378, flow_id=eff548f9-b663-45dd-b8a5-5854f9b5dde8, task_id=98ca66a5-edee-40d4-9253-6a46409241cc (api:54) 2020-08-31 18:44:42,582+0200 INFO (jsonrpc/5) [jsonrpc.JsonRpcServer] RPC call Host.getStorageDomains succeeded in 0.52 seconds (__init__:312) 2020-08-31 18:44:42,801+0200 INFO (jsonrpc/7) [vdsm.api] START disconnectStorageServer(domType=6, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'password': '********', 'vfs_type': 'xfs', 'port': '', 'mnt_options': 'rw,relatime,seclabel,attr2,inode64,noquota,_netdev,x-systemd.device-timeout=0', 'iqn': '', 'connection': '/dev/mapper/vdo1', 'ipv6_enabled': 'false', 'id': 'b4a73d6a-344c-446b-a33d-7b665e78578d', 'user': '', 'tpgt': '1'}], options=None) from=::ffff:192.168.0.87,40378, flow_id=6678917a-b29c-416c-aa2d-5abc1d5351a3, task_id=3d0cf36e-427d-4000-8857-a8a2af641b10 (api:48) 2020-08-31 18:44:42,801+0200 INFO (jsonrpc/7) [storage.Mount] unmounting /rhev/data-center/mnt/_dev_mapper_vdo1 (mount:215) 2020-08-31 18:44:42,806+0200 INFO (jsonrpc/0) [vdsm.api] START disconnectStorageServer(domType=6, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'password': '********', 'vfs_type': 'xfs', 'port': '', 'mnt_options': 'rw,relatime,seclabel,attr2,inode64,noquota,_netdev,x-systemd.device-timeout=0', 'iqn': '', 'connection': '/dev/mapper/vdo1', 'ipv6_enabled': 'false', 'id': 'b4a73d6a-344c-446b-a33d-7b665e78578d', 'user': '', 'tpgt': '1'}], options=None) from=::ffff:192.168.0.87,40378, flow_id=bb449405-5b78-4b65-a352-e2e94a269df9, task_id=09783e0a-933c-448d-b0ca-1b5d351eb042 (api:48) 2020-08-31 18:44:42,806+0200 INFO (jsonrpc/0) [storage.Mount] unmounting /rhev/data-center/mnt/_dev_mapper_vdo1 (mount:215) 2020-08-31 18:44:42,821+0200 ERROR (jsonrpc/0) [storage.HSM] Could not disconnect from storageServer (hsm:2528) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2524, in disconnectStorageServer conObj.disconnect() File "/usr/lib/python3.6/site-packages/vdsm/storage/storageServer.py", line 201, in disconnect self._mount.umount(True, True) File "/usr/lib/python3.6/site-packages/vdsm/storage/mount.py", line 217, in umount umount(self.fs_file, force=force, lazy=lazy, freeloop=freeloop) File "/usr/lib/python3.6/site-packages/vdsm/common/supervdsm.py", line 56, in __call__ return callMethod() File "/usr/lib/python3.6/site-packages/vdsm/common/supervdsm.py", line 54, in <lambda> **kwargs) File "<string>", line 2, in umount File "/usr/lib64/python3.6/multiprocessing/managers.py", line 772, in _callmethod raise convert_to_error(kind, result) vdsm.storage.mount.MountError: Command ['/usr/bin/umount', '-f', '-l', '/rhev/data-center/mnt/_dev_mapper_vdo1'] failed with rc=32 out=b'' err=b'umount: /rhev/data-center/mnt/_dev_mapper_vdo1: not mounted.\n' 2020-08-31 18:44:42,821+0200 INFO (jsonrpc/0) [storage.StorageDomainCache] Refreshing storage domain cache (resize=False) (sdc:80)

2 2

Promiscuous Mode
by Anton Louw 31 Aug '20

31 Aug '20

Hi All, I would like to deploy a VM that will monitor a specific network. I know in VMware you can set the port group to allow Promiscuous Mode. Is there something similar I can do in oVirt? Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

Error exporting into ova
by Gianluca Cecchi 31 Aug '20

31 Aug '20

Hello, I'm playing with export_vm_as_ova.py downloaded from the examples github: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/export_v… My environment is oVirt 4.3.3.7 with iSCSI storage domain. It fails leaving an ova.tmp file In webadmin gui: Starting to export Vm enginecopy1 as a Virtual Appliance 7/19/1911:55:12 AM VDSM ov301 command TeardownImageVDS failed: Cannot deactivate Logical Volume: ('General Storage Exception: ("5 [] [\' Logical volume fa33df49-b09d-4f86-9719-ede649542c21/0420ef47-0ad0-4cf9-babd-d89383f7536b in use.\']\\nfa33df49-b09d-4f86-9719-ede649542c21/[\'a7480dc5-b5ca-4cb3-986d-77bc12165be4\', \'0420ef47-0ad0-4cf9-babd-d89383f7536b\']",)',) 7/19/1912:25:36 PM Failed to export Vm enginecopy1 as a Virtual Appliance to path /save_ova/base/dump/myvm2.ova on Host ov301 7/19/1912:25:37 PM During export I have this qemu-img process creating the disk over the loop device: root 30878 30871 0 11:55 pts/2 00:00:00 su -p -c qemu-img convert -T none -O qcow2 '/rhev/data-center/mnt/blockSD/fa33df49-b09d-4f86-9719-ede649542c21/images/59a4a324-4c99-4ff5-abb1-e9bbac83292a/0420ef47-0ad0-4cf9-babd-d89383f7536b' '/dev/loop1' vdsm vdsm 30882 30878 10 11:55 ? 00:00:00 qemu-img convert -T none -O qcow2 /rhev/data-center/mnt/blockSD/fa33df49-b09d-4f86-9719-ede649542c21/images/59a4a324-4c99-4ff5-abb1-e9bbac83292a/0420ef47-0ad0-4cf9-babd-d89383f7536b /dev/loop1 The ova.tmp file is getting filled while command runs eg: [root@ov301 ]# du -sh /save_ova/base/dump/myvm2.ova.tmp 416M /save_ova/base/dump/myvm2.ova.tmp [root@ov301 sysctl.d]# [root@ov301 sysctl.d]# du -sh /save_ova/base/dump/myvm2.ova.tmp 911M /save_ova/base/dump/myvm2.ova.tmp [root@ov301 ]# and the final generated / not completed file is in this state: [root@ov301 ]# qemu-img info /save_ova/base/dump/myvm2.ova.tmp image: /save_ova/base/dump/myvm2.ova.tmp file format: raw virtual size: 30G (32217446400 bytes) disk size: 30G [root@ov301 sysctl.d]# But I notice that the timestamp of the file is about 67 minutes after start of job and well after the notice of its failure.... [root@ov301 sysctl.d]# ll /save_ova/base/dump/ total 30963632 -rw-------. 1 root root 32217446400 Jul 19 13:02 myvm2.ova.tmp [root@ov301 sysctl.d]# [root@ov301 sysctl.d]# du -sh /save_ova/base/dump/myvm2.ova.tmp 30G /save_ova/base/dump/myvm2.ova.tmp [root@ov301 sysctl.d]# In engine.log the first error I see is 30 minutes after start 2019-07-19 12:25:31,563+02 ERROR [org.ovirt.engine.core.common.utils.ansible.AnsibleExecutor] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [2001ddf4] Ansible playbook execution failed: Timeout occurred while executing Ansible playbook. 2019-07-19 12:25:31,563+02 INFO [org.ovirt.engine.core.common.utils.ansible.AnsibleExecutor] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [2001ddf4] Ansible playbook command has exited with value: 1 2019-07-19 12:25:31,564+02 ERROR [org.ovirt.engine.core.bll.CreateOvaCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [2001ddf4] Failed to create OVA. Please check logs for more details: /var/log/ovirt-engine/ova/ovirt-export-ova-ansible-20190719115531-ov301-2001ddf4.log 2019-07-19 12:25:31,565+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.TeardownImageVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [2001ddf4] START, TeardownImageVDSCommand(HostName = ov301, ImageActionsVDSCommandParameters:{hostId='8ef1ce6f-4e38-486c-b3a4-58235f1f1d06'}), log id: 3d2246f7 2019-07-19 12:25:36,569+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [2001ddf4] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ov301 command TeardownImageVDS failed: Cannot deactivate Logical Volume: ('General Storage Exception: ("5 [] [\' Logical volume fa33df49-b09d-4f86-9719-ede649542c21/0420ef47-0ad0-4cf9-babd-d89383f7536b in use.\']\\nfa33df49-b09d-4f86-9719-ede649542c21/[\'a7480dc5-b5ca-4cb3-986d-77bc12165be4\', \'0420ef47-0ad0-4cf9-babd-d89383f7536b\']",)',) In ansible playbook suggested log file I don't see anything useful. It ends with timestamps when the script has been launched. Last lines are: 2019-07-19 11:55:33,877 p=5699 u=ovirt | TASK [ovirt-ova-export-pre-pack : Retrieving the temporary path for the OVA file] *** 2019-07-19 11:55:34,198 p=5699 u=ovirt | changed: [ov301] => { "changed": true, "dest": "/save_ova/base/dump/myvm2.ova.tmp", "gid": 0, "group": "root", "mode": "0600", "owner": "root", "secontext": "system_u:object_r:nfs_t:s0", "size": 32217446912, "state": "file", "uid": 0 } 2019-07-19 11:55:34,204 p=5699 u=ovirt | TASK [ovirt-ova-pack : Run packing script] ************************************* It seems 30 minutes... for timeout? About what, ansible job? Or possibly implicit user session created when running the python script? The snapshot has been correctly deleted (as I see also in engine.log), I don't see it in webadmin gui. Any known problem? Just for test I executed again at 14:24 and I see same Ansible error at 14:54 The snapshot gets deleted, while the qemu-img command still continues.... [root@ov301 sysctl.d]# ps -ef | grep qemu-img root 13504 13501 0 14:24 pts/1 00:00:00 su -p -c qemu-img convert -T none -O qcow2 '/rhev/data-center/mnt/blockSD/fa33df49-b09d-4f86-9719-ede649542c21/images/59a4a324-4c99-4ff5-abb1-e9bbac83292a/0420ef47-0ad0-4cf9-babd-d89383f7536b' '/dev/loop0' vdsm vdsm 13505 13504 3 14:24 ? 00:01:26 qemu-img convert -T none -O qcow2 /rhev/data-center/mnt/blockSD/fa33df49-b09d-4f86-9719-ede649542c21/images/59a4a324-4c99-4ff5-abb1-e9bbac83292a/0420ef47-0ad0-4cf9-babd-d89383f7536b /dev/loop0 root 17587 24530 0 15:05 pts/0 00:00:00 grep --color=auto qemu-img [root@ov301 sysctl.d]# [root@ov301 sysctl.d]# du -sh /save_ova/base/dump/myvm2.ova.tmp 24G /save_ova/base/dump/myvm2.ova.tmp [root@ov301 sysctl.d]# ll /save_ova/base/dump/myvm2.ova.tmp -rw-------. 1 root root 32217446400 Jul 19 15:14 /save_ova/base/dump/myvm2.ova.tmp [root@ov301 sysctl.d]# and then continues until image copy completes, but at this time the job has already aborted and so the completion of the ova composition doesn't go ahead... and I remain with the ova.tmp file... How to extend timeout? Thanks in advance, Gianluca

4 11

Hosted Engine stuck in Firmware
by Vinícius Ferrão 30 Aug '20

30 Aug '20

Hello, I’ve an strange issue with oVirt 4.4.1 The hosted engine is stuck in the UEFI firmware trying to “never” boot. I think this happened when I changed the default VM mode for the cluster inside the datacenter. There’s a way to fix this without redeploying the engine?

3 3

deprecating export domain?
by Charles Kozler 30 Aug '20

30 Aug '20

Hello, I recently read on this list from a redhat member that export domain is either being deprecated or looking at being deprecated To that end, can you share details? Can you share any notes/postings/bz's that document this? I would imagine something like this would be discussed in larger audience This seems like a somewhat significant change to make and I am curious where this is scheduled? Currently, a lot of my backups rely explicitly on an export domain for online snapshots, so I'd like to plan accordingly Thanks!

11 21

shutdown virtual machine did not display in the list when using virsh list --all and virsh list --state-shutoff
by Kyre 30 Aug '20

30 Aug '20

Hello, I am using ovirt 4.3.8. I want to use the virsh command to boot the shutdown virtual machine, but when using virsh list --all and virsh list --state-shutoff, the shutdown virtual machine did not display in the list. What is the cause of this, and how can I display the shutdown virtual machine. virsh # list --all Please enter your authentication name: root Please enter your password:  Id    Name                           State ----------------------------------------------------  4     win10E2                  running virsh # list --state-shutoff  Id    Name                           State ----------------------------------------------------

4 3

Ovirt Node 4.4.2 Engine Deployment - Notification Settings
by David White 30 Aug '20

30 Aug '20

I finally got oVirt node installed with gluster on a single node. So that's great progress! Once that step was complete... I noticed that the Engine Deployment wizard asks for SMTP settings for where to send notifications. I was kind of surprised that it doesn't allow one to enter any credentials. It looks like this requires an unauthenticated local relay. I don't like that. :) See attached screenshot. Has there been any talk about adding this into the wizard deployment? Sent with ProtonMail Secure Email.

2 1

i/o wait and slow system
by info＠dsdm.ch 29 Aug '20

29 Aug '20

Hello, I'm running a home setup with 3 nodes and 2 SATA SSDs per node. As storage I'm running glusterfs and 40GBit/s links. Software Version:4.3.9.4-1.el7 I've a lot of I/O Wait on the nodes (20%) and on the VMs (50%). gluster volume top vmstore write-perf bs 2014 count 1024 | grep Through Throughput 635.54 MBps time 0.0032 secs Throughput 614.89 MBps time 0.0034 secs Throughput 622.31 MBps time 0.0033 secs Throughput 643.07 MBps time 0.0032 secs Throughput 621.75 MBps time 0.0033 secs Throughput 609.26 MBps time 0.0034 secs gluster volume top vmstore read-perf bs 2014 count 1024 | grep Through Throughput 1274.62 MBps time 0.0016 secs Throughput 1320.32 MBps time 0.0016 secs Throughput 1203.93 MBps time 0.0017 secs Throughput 1293.81 MBps time 0.0016 secs Throughput 1213.14 MBps time 0.0017 secs Throughput 1193.48 MBps time 0.0017 secs Volume Name: vmstore Type: Distributed-Replicate Volume ID: 195e2a05-9667-4b8b-b0b7-82294631de50 Status: Started Snapshot Count: 0 Number of Bricks: 2 x 3 = 6 Transport-type: tcp Bricks: Brick1: 10.9.9.101:/gluster_bricks/vmstore/vmstore Brick2: 10.9.9.102:/gluster_bricks/vmstore/vmstore Brick3: 10.9.9.103:/gluster_bricks/vmstore/vmstore Brick4: 10.9.9.101:/gluster_bricks/S4CYNF0M219849L/S4CYNF0M219849L Brick5: 10.9.9.102:/gluster_bricks/S4CYNF0M219836L/S4CYNF0M219836L Brick6: 10.9.9.103:/gluster_bricks/S4CYNF0M219801Y/S4CYNF0M219801Y Options Reconfigured: performance.client-io-threads: on nfs.disable: on transport.address-family: inet performance.strict-o-direct: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.low-prio-threads: 32 network.remote-dio: off cluster.eager-lock: enable cluster.quorum-type: auto cluster.server-quorum-type: server cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-max-threads: 8 cluster.shd-wait-qlength: 10000 features.shard: on user.cifs: off cluster.choose-local: off client.event-threads: 4 server.event-threads: 4 network.ping-timeout: 30 storage.owner-uid: 36 storage.owner-gid: 36 cluster.granular-entry-heal: enable Please help me to analyse the root cause. Many thanks Metz

4 14

Missing model_FLAGS on specific host
by Vinícius Ferrão 28 Aug '20

28 Aug '20

Hi, I’ve an strange issue in one of my hosts, it’s missing a lot of CPU flags that oVirt seems to require: [root@c4140 ~]# vdsm-client Host getCapabilities | egrep "cpuFlags|cpuModel" "cpuFlags": "ssse3,mca,ept,pdpe1gb,vmx,clwb,smep,msr,acpi,pge,sse4_2,nopl,cqm_mbm_total,cx16,avx512vl,aperfmperf,xsaves,3dnowprefetch,nonstop_tsc,cmov,mce,intel_pt,avx512f,fpu,pku,tsc,sdbg,erms,pse36,md_clear,apic,sse,pcid,clflushopt,xtopology,pts,monitor,vpid,cpuid,hle,mba,ss,cqm,avx2,ibpb,xgetbv1,flush_l1d,mmx,epb,pti,fxsr,dca,nx,syscall,stibp,mtrr,cx8,sse2,avx,sep,intel_ppin,lm,tm,bts,adx,bmi1,smx,popcnt,pclmulqdq,lahf_lm,mpx,rdseed,cqm_llc,avx512cd,cdp_l3,f16c,invpcid,fsgsbase,cpuid_fault,tm2,smap,dts,pse,xsave,sse4_1,constant_tsc,pat,tsc_deadline_timer,vnmi,avx512dq,dtes64,xsaveopt,ida,pdcm,tpr_shadow,pln,de,x2apic,avx512bw,pae,rdrand,clflush,rdtscp,art,cqm_mbm_local,pebs,ssbd,movbe,pbe,tsc_adjust,vme,ht,est,bmi2,cat_l3,dtherm,ospke,rdt_a,aes,ibrs,rep_good,fma,xtpr,ds_cpl,abm,xsavec,invpcid_single,flexpriority,cqm_occup_llc,pni,rtm,arat,arch_perfmon", "cpuModel": "Intel(R) Xeon(R) Gold 6130 CPU @ 2.10GHz", In a properly working host it have flags like those ones: model_Westmere-IBRS,model_kvm32,model_core2duo,model_Opteron_G1,model_Broadwell,model_qemu64,model_Broadwell-noTSX,model_Nehalem-IBRS,model_Haswell-IBRS,model_pentium2,model_Broadwell-IBRS,model_Haswell-noTSX,model_Haswell,model_Haswell-noTSX-IBRS,model_Conroe,model_pentium,model_n270,model_Nehalem,model_IvyBridge-IBRS,model_kvm64,model_SandyBridge,model_pentium3,model_Broadwell-noTSX-IBRS,model_qemu32,model_486,model_IvyBridge,model_SandyBridge-IBRS,model_Westmere,model_Penryn,model_Opteron_G2,model_coreduo", But in this machine it’s totally missing. I know this model_ flags are an oVirt thing, since they aren’t default on the CPUs. The host machine is a Dell C4140 compute node, the firmware is fully updated, so I’ve done the basic to figure out what’s happening. Thanks,

1 1

ovirt 4.4 self-hosted deployment questions
by Michael Thomas 28 Aug '20

28 Aug '20

I have not been able to find answers to a couple of questions in the self-hosted engine documentation[1]. * When installing a new Enterprise Linux host for ovirt, what are the network requirements? Specifically, am I supposed to set up the ovirtmgmt bridge myself on new hosts, or am I supposed to let that be handled by the engine when I add the new host to the engine? * In the 'New Host' dialog on the engine management page, does the Hostname/IP that I enter have to be the host's name on the ovirtmgmt LAN? If so, then it seems to me that I need to configure the ovirtmgmt bridge myself on new hosts. * Does the engine need to be able to route outside of the cluster (eg to the WAN), or is it allowed to restrict the engine's routing to the local cluster? * In the 'New Host' dialog on the engine management page, what is the meaning of 'Choose hosted engine deployment action'? From the way it is phrased, it sounds like this will create a second engine in my cluster, which doesn't make sense. Or does this mean that the new host will be able to run the Engine VM in a HA manner? In my current test deployment I have 3 subnets in my cluster. Network WAN is the WAN. Network CLUSTER is for communication between cluster compute nodes, storage servers, and management servers. Network OVIRT is for ovirt management and VM migration between hosts. My first self-hosted engine host is connected to networks CLUSTER and OVIRT. The engine VM is only connected to network OVIRT through a bridge on the host, but has a gateway that lets it route traffic to network CLUSTER (but not network WAN). Is this an appropriate network setup for ovirt, or should there be no distinction between the CLUSTER and OVIRT networks? --Mike [1]https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_eng…

2 1

Gluster Volume Type Distributed
by Dominique Deschênes 28 Aug '20

28 Aug '20

Hi Everyone, I would like to use Distrbuted Volume type but the volume type is Gray out. I can only use the replicate type. It's normal ? 3 ovirt Servers 4.4.1-2020080418 Can I configure a replicate volume for the engine domain and Distributed for the data domain? Thank you Dominique Deschênes Ingénieur chargé de projets, Responsable TI 816, boulevard Guimond, Longueuil J4G 1T5 450 670-8383 x105 450 670-2259

4 3

Failed to connect to the hypervisor
by Eugène Ngontang 28 Aug '20

28 Aug '20

Hi, I'm facing a strange issue with ovirt host. I can't list nodes status running virsh, vdsdm seems bad. I can't even delete the hosted engine, nor ping it, but I can still access my infra vm inside it[image: 😉] My outputs : > [root@moe ~]# /usr/sbin/ovirt-hosted-engine-cleanup > This will de-configure the host to run ovirt-hosted-engine-setup from > scratch. > Caution, this operation should be used with care. > Are you sure you want to proceed? [y/n] > y > -=== Destroy hosted-engine VM ===- > You must run deploy first > setlocale: No such file or directory > error: failed to connect to the hypervisor > error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No > such file or directory > -=== Stop HA services ===- > -=== Shutdown sanlock ===- > shutdown force 1 wait 0 > shutdown done -111 > -=== Disconnecting the hosted-engine storage domain ===- > You must run deploy first > -=== De-configure VDSM networks ===- > ovirtmgmt > ovirtmgmt > A previously configured management bridge has been found on the system, > this will try to de-configure it. Under certain circumstances you can loose > network connection. > Caution, this operation should be used with care. > Are you sure you want to proceed? [y/n] > y > -=== Stop other services ===- > -=== De-configure external daemons ===- > -=== Removing configuration files ===- > ? /etc/init/libvirtd.conf already missing > ? /etc/libvirt/nwfilter/vdsm-no-mac-spoofing.xml already missing > ? /etc/ovirt-hosted-engine/answers.conf already missing > ? /etc/ovirt-hosted-engine/hosted-engine.conf already missing > ? /etc/vdsm/vdsm.conf already missing > ? /etc/pki/vdsm/*/*.pem already missing > ? /etc/pki/CA/cacert.pem already missing > ? /etc/pki/libvirt/*.pem already missing > ? /etc/pki/libvirt/private/*.pem already missing > ? /etc/pki/ovirt-vmconsole/*.pem already missing > ? /var/cache/libvirt/* already missing > ? /var/run/ovirt-hosted-engine-ha/* already missing > [root@moe ~]# ping 192.168.33.143 > PING 192.168.33.143 (192.168.33.143) 56(84) bytes of data. > 64 bytes from 192.168.33.143: icmp_seq=1 ttl=64 time=0.132 ms > 64 bytes from 192.168.33.143: icmp_seq=2 ttl=64 time=0.082 ms > 64 bytes from 192.168.33.143: icmp_seq=3 ttl=64 time=0.072 ms > 64 bytes from 192.168.33.143: icmp_seq=4 ttl=64 time=0.083 ms > 64 bytes from 192.168.33.143: icmp_seq=5 ttl=64 time=0.075 ms > 64 bytes from 192.168.33.143: icmp_seq=6 ttl=64 time=0.082 ms > ^C > --- 192.168.33.143 ping statistics --- > 6 packets transmitted, 6 received, 0% packet loss, time 4999ms > rtt min/avg/max/mdev = 0.072/0.087/0.132/0.022 ms > [root@moe ~]# nodectl check > Status: WARN > Bootloader ... OK > Layer boot entries ... OK > Valid boot entries ... OK > Mount points ... OK > Separate /var ... OK > Discard is used ... OK > Basic storage ... OK > Initialized VG ... OK > Initialized Thin Pool ... OK > Initialized LVs ... OK > Thin storage ... OK > Checking available space in thinpool ... OK > Checking thinpool auto-extend ... OK > vdsmd ... BAD > [root@moe ~]# virsh -r list > setlocale: No such file or directory > error: failed to connect to the hypervisor > error: Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': No > such file or directory > [root@moe ~]# Have you guys ever faced this issue? How can I access VM inside my virtual data center while the VM Manager is broken? Any solution to work around this please? Regards, Eugène NG -- LesCDN <http://lescdn.com> engontang(a)lescdn.com ------------------------------------------------------------ *Aux hommes il faut un chef, et au* * chef il faut des hommes!L'habit ne fait pas le moine, mais lorsqu'on te voit on te juge!*

1 0

Compatibilty issue
by carl langlois 28 Aug '20

28 Aug '20

Hi, I have upgraded ovirt to 4.3 and now I have some vm that I can start because of the cluster compatibility version. Those VM where in save state when I updated the cluster compatibility version. Now they are in a down state but if i try to run it I get this message. Cannot run VM. The Custom Compatibility Version of VM vmfpgatest (4.2) is not supported in Data Center compatibility version 4.3. any suggestions? Regards Carl

1 0

TroubleshootingoVirt Node deploy FQDN not reachable
by David White 27 Aug '20

27 Aug '20

In a recent thread, Roberto mentioned seeing the error message "FQDN Not Reachable" when trying to deploy oVirt Node 4.4.1, but was able to get past that error when using ovirt-node-ng-installer-4.4.2-2020080612.el8.iso. I experienced the same problems on oVirt Node install 4.4.1, so I tried the latest release of 4.4.2. When that failed, I went back and installed from the exact same image as Roberto said worked on the 4.4.2 branch: ovirt-node-ng-installer-4.4.2-2020080612.el8.iso Unfortunately, that's still not working for me - so that tells me I'm probably doing something wrong. Given the following facts: [root@dev1-centos ~]# hostname dev1-centos.office.barredowlweb.com [root@dev1-centos ~]# host dev1-centos.office.barredowlweb.com dev1-centos.office.barredowlweb.com has address 192.168.2.96 I am trying to install oVirt using the Hyperconverged Gluster Wizard for a Single Node. In the "Host1" box, I enter the full hostname: dev1-centos.office.barredowlweb.com And that's when I get the FQDN error message. Am I missing something here? Sent with ProtonMail Secure Email.

4 5

Is the Hosted Engine setup finished + Can't connect vdsm storage
by Bielej SRE 27 Aug '20

27 Aug '20

Hi, We have 6 node oVirt setup with Compatibility version 4.3 running on CentOS 7.6.1810 Recently We have found out some very interesting log entries on a few of our nodes. /var/log/ovirt-hosted-engine-ha/broker.log: MainThread::INFO::2020-08-27 12:51:50,279::storage_backends::345::ovirt_hosted_engine_ha.lib.storage_backends::(connect) Connecting the storage MainThread::INFO::2020-08-27 12:51:50,280::storage_server::349::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::warning::2020-08-27 12:51:50,284::storage_broker::97::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(__init__) Can't connect vdsm storage: 'NoneType' object has no attribute 'startswith' /var/log/messages Aug 27 12:52:11 ildeco25 vdsm[6909]: ERROR failed to retrieve Hosted Engine HA score '[Errno 2] No such file or directory'Is the Hosted Engine setup finished? We have inherited that setup from the previous team but I'm fairly certain the the Hosted Engine setup is finished. Also, this line is not present on all hosts. Should We worry about ovirt-ha-broker service not running on some hosts? host24 Active: inactive (dead) host25 Active: failed (Result: start-limit) since Thu 2020-08-27 12:56:13 CEST; 2s ago host26 Active: active (running) since Sun 2020-08-23 22:55:01 CEST; 3 days ago host27 Active: inactive (dead) host28 Active: failed (Result: start-limit) since Thu 2020-08-27 12:56:18 CEST; 4s ago host29 Active: inactive (dead) Currently the hosted engine VM is running on host26. I'd be very grateful for any help. Kind regards, Michal Bielejewski

2 1

Impossible to install Windows VMs on 4.4.1
by fgarat＠gmail.com 27 Aug '20

27 Aug '20

Hi, I'm having problem after I upgraded to 4.4.1 with Windows machines. The installation sees no disk. Even IDE disk doesn't get detected and installation won't move forward no matter what driver i use for the disk. Any one else having this issue?. Regards, Facundo

3 4

Host has no default route
by Wesley Stewart 27 Aug '20

27 Aug '20

I am trying to add a host to a single host cluster. Everything has gone pretty well so far, except when the host gets to the end of the installation process, I see an exclamation mark indicating "Host has no default route". The installation "finishes" and the host goes into a non-responsive state. I am not really sure where to check. I get a: host *name* installation has failed. Network error during communication with host. Running 4.3.6 Thanks!

2 1

[ANN] oVirt 4.4.2 Fifth Release Candidate is now available for testing
by Lev Veyde 27 Aug '20

27 Aug '20

oVirt 4.4.2 Fifth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.2 Fifth Release Candidate for testing, as of August 27th, 2020. This update is the second in a series of stabilization updates to the 4.4 series. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.2 release highlights: http://www.ovirt.org/release/4.4.2/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.2/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

3 3

LDAP/AD issue
by kim.kargaard＠noroff.no 26 Aug '20

26 Aug '20

Hi all, We have had our ovirt instance connected to our internal AD for users to log into the VM portal for the last year, linked to studentdomene.noroff.no. This has been working without any problems. We had it set up and the DNS server had a forward record to the DC's. All good. Then, of course, the institution decided to introduce student emails and they decided to add the domain stud.noroff.no for student emails and made this the primary domain in the AD. The problem is that when this is changed, students can no longer log into the engine. I have of course changed the ldap settings and added a forward record on the DNS to the new domain. However, it seems that the domain is studentdomene.noroff.no, but with an added UPN suffix with stud.noroff.no When students try to log in, with the config changes, they get this error in the browser: server_error: An error occurred while attempting to query DNS in order to retrieve SRV records with name '_ldap._tcp.stud.noroff.no': NameNotFoundException(DNS name not found [response code 3]), ldapSDKVersion=4.0.7, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 Any ideas on how to solve this issue? My config looks like this: sudo cat /etc/ovirt-engine/aaa/Students.properties [sudo] password for noroffadmin: include = <ad.properties> vars.domain = studentdomene.noroff.no vars.user = CN=ovirt auth,CN=Users,DC=stud,DC=noroff,DC=no vars.password = PASSWORD pool.default.auth.simple.bindDN = ${global:vars.user} pool.default.auth.simple.password = ${global:vars.password} pool.default.serverset.type = srvrecord pool.default.serverset.srvrecord.domain = ${global:vars.domain} my forward on the DNS server looks like this: sudo cat /etc/named/named.conf.local [sudo] password for noroffadmin: zone "platform.noroff.no"{ type master; file "/etc/named/zones/db.platform.noroff.no"; # zone file path }; zone "stud.noroff.no" { type forward; forward only; forwarders { 172.24.111.20; 172.27.111.20; 172.21.111.20; 172.16.111.20; }; }; zone "studentdomene.noroff.no" { type forward; forward only; forwarders { 172.24.111.20; 172.27.111.20; 172.21.111.20; 172.16.111.20; }; }; zone "122.16.172.in-addr.arpa" { type master; file "/etc/named/zones/db.122.16.172"; # 172.16.122.0/24 subnet }; Any pointers would be greatly appreciated :) Kim

2 1

oVirt SHE smart-automated backup
by Vrgotic, Marko 26 Aug '20

26 Aug '20

Dear oVirt, For a while now I have been running backup of oVirt engine via ansible. And that works just fine. However, its still recommended, in SHE HA environment, especially for Restore purpose to have one of HA nodes in Maintenance mode, clean from Virtual load. Has anyone so far been able to automate oVirt engine backup in following or similar way: 1. Register on which HA node is SHE atm 2. Pick the other HA node to go into maintenance mode – in order to have one of HA nodes without virtual load 3. Verify it’s in maintenance mode 4. Execute engine-backup 5. Remove the maintenance mode of the node from step 2 Even if you are half way through, I would be happy to get involved and contribute. Kindly awaiting your reply. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

2 4

oVirt HCI 4.4.1 DR cannot import target volume after disaster
by wodel youchi 25 Aug '20

25 Aug '20

Hi, I have installed two HCI platforms. Then I set up the disaster-recovery configuration On source platform I did : # gluster volume set all cluster.enable-shared-storage enable # gluster system:: execute gsec_create # gluster volume geo-replication *source* gnodesen2-01.example.com::dest create push-pem # gluster volume geo-replication *source* gnodesen2-01.example.com::dest config use_meta_volume true On target platform I did : # gluster volume set *dest* features.shard enable I then realized these two tests : *1 - Sync data using the schedule_georep.py* a - Use the : "python3 /usr/share/glusterfs/scripts/schedule_georep.py source gnodesen2-01.example.com dest " command to sync data between the volumes b - After the sync is complete, execute "gluster volume dest set features.read-only off" c - Execute *import* (not create) *dest* volume on the target platform manually through the Admin-UI, Result : The domain could not be added and I get this error on vdsm log : " 2020-08-24 10:18:05,644+0100 ERROR (jsonrpc/5) [storage.HSM] Unexpected error (hsm:2843) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/sd.py", line 456, in getVersion version = self.getMetaParam(DMDK_VERSION) File "/usr/lib/python3.6/site-packages/vdsm/storage/sd.py", line 452, in getMetaParam return self._metadata[key] File "/usr/lib/python3.6/site-packages/vdsm/storage/persistent.py", line 114, in __getitem__ return dec(self._dict[key]) File "/usr/lib/python3.6/site-packages/vdsm/storage/persistent.py", line 225, in __getitem__ return self._metadata[key] KeyError: 'VERSION' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2829, in getStorageDomainsList dom = sdCache.produce(sdUUID=sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 115, in produce domain.getRealDomain() File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 51, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 139, in _realProduce domain = self._findDomain(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 156, in _findDomain return findMethod(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/glusterSD.py", line 62, in findDomain return GlusterStorageDomain(GlusterStorageDomain.findDomainPath(sdUUID)) File "/usr/lib/python3.6/site-packages/vdsm/storage/fileSD.py", line 385, in __init__ manifest = self.manifestClass(domainPath) File "/usr/lib/python3.6/site-packages/vdsm/storage/fileSD.py", line 162, in __init__ sd.StorageDomainManifest.__init__(self, sdUUID, domaindir, metadata) File "/usr/lib/python3.6/site-packages/vdsm/storage/sd.py", line 352, in __init__ version = self.getVersion() * File "/usr/lib/python3.6/site-packages/vdsm/storage/sd.py", line 458, in getVersion raise se.MetaDataKeyNotFoundError("key={}".format(DMDK_VERSION))vdsm.storage.exception.MetaDataKeyNotFoundError: Meta Data key not found error: ('key=VERSION',)* 2020-08-24 10:18:05,644+0100 INFO (jsonrpc/5) [vdsm.api] FINISH getStorageDomainsList return={'domlist': []} from=::ffff:10.80.101.27,48282, flow_id=5209d576-ee09-4de3-bc46-0c186c6ad52a, task_id=bc93aaae-5449-4d0d-9884-f47ea542a963 (api:54) 2020-08-24 10:18:05,645+0100 INFO (jsonrpc/5) [jsonrpc.JsonRpcServer] RPC call Host.getStorageDomains succeeded in 3.01 seconds (__init__:312) 2020-08-24 10:18:05,754+0100 INFO (jsonrpc/4) [vdsm.api] START disconnectStorageServer(domType=7, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'password': '********', 'vfs_type': 'glusterfs', 'port': '', 'mnt_options': 'backup-volfile-servers=10.90.101.23:10.90.101.25', 'iqn': '', 'connection': '10.90.101.21:/dest', 'ipv6_enabled': 'false', 'id': 'cc24df41-19b0-41ed-ae85-e091e40cc612', 'user': '', 'tpgt': '1'}], options=None) from=::ffff:10.80.101.27,48282, flow_id=5fcaf7d7-d3b6-4430-b5f9-28e6bd95656a, task_id=73654a43-c86b-4250-95d7-3e3399e5bc72 (api:48) 2020-08-24 10:18:05,754+0100 INFO (jsonrpc/4) [storage.Mount] unmounting /rhev/data-center/mnt/glusterSD/10.90.101.21:_dest (mount:215) " *Note :* I had to modify the line 105 from /usr/share/glusterfs/scripts/schedule_georep.py to be able to use it with python3 : - ey = "_".join([func.func_name] + list(args)) + key = "_".join([func.__name__] + list(args)) *2 - Sync data using the adminUI :* a - Create a schedule on the adminUI and wait until the sync is complete. b - Switch off read-only on target volume : gluster volume set dest features.read-only off (on the target volume) c - Execute ansible failover scripts : ansible-playbook dr-rhv-failover.yml --tags="fail_over" command (on the ansible machine) Result : 020-08-24 15:51:58,874+0100 INFO (jsonrpc/0) [IOProcessClient] (3a5d378b-8043-4072-9c58-e838343d6028) Starting client (init:308) 2020-08-24 15:51:58,886+0100 INFO (ioprocess/140212) [IOProcess] (3a5d378b-8043-4072-9c58-e838343d6028) Starting ioprocess (init:434) 2020-08-24 15:51:58,888+0100 INFO (jsonrpc/0)** [vdsm.api] FINISH createStorageDomain error=Storage domain is not empty - requires cleaning: ('gnodesen2-01.example.com:/dest',) from=::ffff:10.80.101.27,45118, flow_id=765c5009, task_id=ed3a34f9-5e81-40f4-a592-78e585c1f937 (api:52) 2020-08-24 15:51:58,888+0100 ERROR (jsonrpc/0) [storage.TaskManager.Task] (Task='ed3a34f9-5e81-40f4-a592-78e585c1f937') Unexpected error (task:880) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/task.py", line 887, in _run return fn(args, *kargs) File "<decorator-gen-121>", line 2, in createStorageDomain File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 50, in method ret = func(args, *kwargs) File "/usr/lib/python3.6/site-packages/vdsm/storage/hsm.py", line 2644, in createStorageDomain max_hosts=max_hosts) File "/usr/lib/python3.6/site-packages/vdsm/storage/nfsSD.py", line 95, in create version) **File "/usr/lib/python3.6/site-packages/vdsm/storage/nfsSD.py", line 60, in _preCreateValidation *raise se.StorageDomainNotEmpty(typeSpecificArg)vdsm.storage.exception.StorageDomainNotEmpty: Storage domain is not empty - requires cleaning: ('gnodesen2-01.example.com:/dest',)2020-08-24 15:51:58,888+0100 INFO (jsonrpc/0) [storage.TaskManager.Task] (Task='ed3a34f9-5e81-40f4-a592-78e585c1f937') aborting: Task is aborted: "value=Storage domain is not empty - requires cleaning: ('gnodesen2-01.example.com:/dest',) abortedcode=361" (task:1190)* 2020-08-24 15:51:58,888+0100 ERROR (jsonrpc/0) [storage.Dispatcher] FINISH createStorageDomain error=Storage domain is not empty - requires cleaning: ('gnodesen2-01.example.com:/dest',) (dispatcher:83) 2020-08-24 15:51:58,889+0100 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC* call StorageDomain.create failed *(error 361) in 0.20 seconds (init:312) 2020-08-24 15:51:58,934+0100 INFO (jsonrpc/2) [vdsm.api] START disconnectStorageServer(domType=7, spUUID='00000000-0000-0000-0000-000000000000', conList=[{'password': '****', 'vfs_type': 'glusterfs', 'port': '', 'iqn': '', 'connection': 'gnodesen2-01.example.com:/dest', 'ipv6_enabled': 'false', 'id': 'd104177f-f391-45bc-a8a7-905da90d4e7d', 'user': '', 'tpgt': '1'}], options=None) from=::ffff:10.80.101.27,45118, flow_id=f8c31837-fd32-48f2-bed9-6138ea4c6bb0, task_id=badf6391-06cd-4e11-ade5-95dd10b86af5 (api:48) 2020-08-24 15:51:58,934+0100 INFO (jsonrpc/2) [storage.Mount] unmounting /rhev/data-center/mnt/glusterSD/gnodesen2-01.example.com:_dest (mount:215) Any ideas? Regards.

1 0

oVirt node 4.4.1 deploy FQDN not reachable
by Roberto Nunin 25 Aug '20

25 Aug '20

Hi all I have an issue while trying to deploy hyperconverged solution on three ovirt node boxes. ISO used is ovirt-node-ng-installer-4.4.1-2020072310.el8.iso. When from cockpit I choose gluster deployment, I have a form where I can insert both gluster fqdn names and public fqdn names (that is what I need, due to distinct network cards & networks) If I insert right names, that are resolved by nodes, I receive, anyway, FQDN is not reachable below Host1 entries. As already stated, these names are certainly resolved by DNS used. Any hints about ? -- Roberto Nunin

3 5

Actual oVirt install questions
by David White 25 Aug '20

25 Aug '20

:) Ok, after all of the questions I've pestered you guys with, I'm actually getting started. Thank you all for your help. A few of questions right off the bat. For this install, I'm installing the latest (4.4.2) onto CentOS 8. 1) What's the difference between the `ovirt-hosted-engine-setup` command and the `engine-setup` command? I ran both of them, and it seems like they do the exact same thing. 2) For either of the commands above, I'm able to get as far as the step where it asks about the storage: Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs] It's clear to me that using this install method, the storage should be setup first / independently of the installer. So ok, I'll try the Cockpit install, since the documentation says that's the preferred method anyway. (I'm just a sucker for the command line, doing it myself, and understanding everything that I'm doing. I like to avoid GUIs if I can help it. LOL). So I logged into the Cockpit Dashboard at {ip-address}:9090, clicked on 'Virtualization' then clicked on Hosted Engine. Here, I clicked on Hyperconvered, and since I'm just installing to a single host right now, I clicked on Run Gluster Wizard for Single Node. So here's my 3rd question. 3) I can't get past the first step of this wizard. It is asking for the FQDN of the host (Host1). - The documentation indicates that this is NOT the base OS, but I've tried that - I've also tried the IP address that I intend to use for the manager (i.e. what I envision is akin to the vCenter IP address for a vSphere environment -- correct?) In both cases, the wizard won't let me proceed, and keeps saying "Host is not added to known_hosts" What am I missing, here? I'm familiar with the known_hosts file... but that's the VM / manager that I'm trying to create, I thought? Why does the wizard continue to give me that error message? Sent with ProtonMail Secure Email.

4 13

Guest agent ubuntu 20.04
by carl langlois 24 Aug '20

24 Aug '20

Hi, This may not be the right place to ask but any of you is using Ubuntu 20.04 guest. I have noticed that the guest agent is not present in the repo.. Regards Carl

4 4

Is oVirt suited for supporting long-lived VMs than OpenStack?
by yam yam 24 Aug '20

24 Aug '20

Hi guys, I'm wondering why people say oVirt is better suited for traditional workloads like long-lived VMs than OpenStack. does oVirt have some additional features for it? Of course, VMs in OpenStack might be intentionally killed according to resource pressure if auto-scaling is used. but otherwise, I guess OpenStack has enough to run long-lived VMs. thanks.

3 6