- Users - oVirt List Archives

locked snapshot after snapshot preview
by Jiří Sléžka 20 May '20

20 May '20

Hi, Ovirt 4.3.9.4-1.el7, CentOS7... colleague of me tried yesterday do a snapshot preview on his vm but operation got stalled. I can see in Task list in Manager operation "Preview VM Snapshot před AD test of VM install_W10_LTSC-REK" in state Finalizing (6 hours ago) In the Events I see May 19, 2020, 4:00:17 PM Failed to complete Snapshot-Preview před AD test for VM install_W10_LTSC-REK. 18acb86e-581c-43f5-bf99-f8d738870976 May 19, 2020, 3:57:40 PM Failed to run VM install_W10_LTSC-REK due to a failed validation: [Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again.] (User: ******@*********). d892b7dd-741b-4c61-ac37-b1077eaeaf79 When I grepping correlation id from failed run from engine log a got zcat /var/log/ovirt-engine/engine.log-20200520.gz | grep "d892b7dd-741b-4c61-ac37-b1077eaeaf79" 2020-05-19 15:57:40,435+02 INFO [org.ovirt.engine.core.bll.RunVmCommand] (default task-210) [d892b7dd-741b-4c61-ac37-b1077eaeaf79] Lock Acquired to object 'EngineLock:{exclusiveLocks='[2f1fb183-55ea-477c-a75b-625f889e4c79=VM]', sharedLocks=''}' 2020-05-19 15:57:40,489+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-210) [d892b7dd-741b-4c61-ac37-b1077eaeaf79] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM install_W10_LTSC-REK due to a failed validation: [Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again.] (User: kra0002(a)CRO.slu.cz) 2020-05-19 15:57:40,489+02 WARN [org.ovirt.engine.core.bll.RunVmCommand] (default task-210) [d892b7dd-741b-4c61-ac37-b1077eaeaf79] Validation of action 'RunVm' failed for user kra0002(a)CRO.slu.cz. Reasons: VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_IS_DURING_SNAPSHOT 2020-05-19 15:57:40,489+02 INFO [org.ovirt.engine.core.bll.RunVmCommand] (default task-210) [d892b7dd-741b-4c61-ac37-b1077eaeaf79] Lock freed to object 'EngineLock:{exclusiveLocks='[2f1fb183-55ea-477c-a75b-625f889e4c79=VM]', sharedLocks=''}' greping correlation id on failed snapshot preview shows only INFO events, not ERRORS nor WARNINGS and it looks to me like everything was FINISHed When I try to display locked entities a got cd /usr/share/ovirt-engine/setup/dbutils ./unlock_entity.sh -q -t all -c Locked VMs vm_name | snapshot_id ----------------------+-------------------------------------- install_W10_LTSC-REK | 9d53c7b4-8ec5-4d31-8ab1-16bb75ab8f2b Locked templates template_name | disk_id ---------------+--------- Locked disks vm_id | disk_id --------------------------------------+-------------------------------------- 2f1fb183-55ea-477c-a75b-625f889e4c79 | 707db1f6-0859-48ab-b9d0-a97619ed8b0b Locked snapshots vm_id | snapshot_id --------------------------------------+-------------------------------------- 2f1fb183-55ea-477c-a75b-625f889e4c79 | 9d53c7b4-8ec5-4d31-8ab1-16bb75ab8f2b Illegal images vm_name | image_guid ---------+------------ I am about to try unlock that snapshot but for sure... * how can I be sure that snapshot operations is not still running (it would be nice to have some sort of progress bar o better reporting what is happening in Manager...) * looks it like bug? Should I fill bugreport or publish more logs? Cheers, Jiri

2 1

Host "Unassigned Logical Networks" list is wrong
by Matthias Leopold 20 May '20

20 May '20

Hi, I'm having a special issue with assigning logical networks to host interfaces via label. I'm used to assigning logical networks (tagged VLANs, VM network flag) a "Network label", which I can choose from a drop down menu in the UI dialog. These networks are automatically flagged "assign" and "require" in my cluster and I expect them to be synced to hosts physical interface to which I "drag and dropped" the label. This always seemed to work and I never worried. Now I noticed that when I look at the host "Setup Host Networks" dialog again, that the last(?) logical networks I provisioned as explained above show up as "Unassigned Logical Networks" with a mouse over text of "Network should be assigned to 'foo' via label 'bar'. However for some reason it isn't". This has to be some presentation error, because the networks are in fact assigned which is also visible in the hosts "Network Interfaces" tab. The "Sync All Network" buttons in "Host" - "Network Interfaces" and "Cluster" - "Logical Networks" tabs are inactive. When hosts are put to maintenance and activated again the error disappears. My oVirt version is 4.3.7. Cluster switch type is "Linux Bridge". This may seem a minor error, but since it affects my production clusters and a couple of VLANs I can't afford to play around with host network configuration. Can anybody explain this? Any help would be appreciated. thx Matthias

2 2

[Feedback needed] oVirt 4.4.0 Test week
by Sandro Bonazzola 19 May '20

19 May '20

Hi, oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of weeks. oVirt 4.4.0 release candidate was released yesterday and we'd like to gather as much feedback as possible. Please join us testing this release candidate next week, starting Sunday May 10th 2020 till Friday May 15th 2020! We are going to coordinate the testing effort with a public Trello board at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day You'll find instructions on how to use the board there. For joining the board you can use this link: https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovirt… If you have not an environment dedicated to testing, remember you can set up a few VMs and test the deployment with nested virtualization using your production environment creating a virtual test environment. In this case please be careful avoiding touching the production environment from the testing one. The oVirt team will monitor the Trello board, the #ovirt IRC channel on irc.oftc.net server and the users(a)ovirt.org mailing list to assist with the testing and debugging issues. Basic instructions for setting up a minimal system are available in release candidate announce at: https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVKTA… Release notes for this release candidate are available here: https://ovirt.org/release/4.4.0/ Thanks -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

7 14

HostedEngine add more RAM
by Joseph Goldman 19 May '20

19 May '20

Hi List, I'm having troubles adding more RAM to my HostedEngine VM. When the cluster first got up and running I only had a little bit of RAM so I only gave the HE 4GB, but i'm constantly getting BadHealth alerts so I want to up it to 8GB. I have tried multiple ways - mostly any time i edit the HE VM through the UI it simply reverts back to 4096MB RAM, never upgrades to 8192MB. I have tried with global HA maintenance on as well but no luck. No errors, it saves as if it has completed the action but when I re-open the VM (or even after a fresh boot) it has simply reverted back to 4096MB. Any help appreciated. Thanks, Joe

3 5

Re: Migrate hosted engine to standalone host
by Anton Louw 18 May '20

18 May '20

Hello, I am not sure if the below thread went missing somewhere. Just to add on as well, when moving the hosted engine to a standalone host, will the process look similar to the below: Backup and remove Hosted Engine: 1. Backup Hosted Engine (engine-backup --scope=all --mode=backup --file=Full --log=Log_Full) 2. Download the backup files from HE using WinSCP 3. Enable global Maintenance (hosted-engine --set-maintenance --mode=global) 4. Power down hosted engine (hosted-engine --vm-shutdown) --------------------------------------------------------------------------------------------- Redeploy Hosted Engine: Build new CentOS VM in another environment *Same IP *Same name *Same resources 1. sudo yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm 2. sudo yum install -y ovirt-engine 3. Copy backup files to newly deployed CentOS VM 4. engine-backup --mode=restore --file=Full --log=Log_Full --provision-db --provision-dwh-db --restore-permissions 5. after retore has completed, run engine-setup Or are there any additional steps I need to take? I have tried this in my one lab environment, and it works without any issues, however when trying this on my second lab environment, everything shows as “down”, ie. Hosts, Data Center and Storage Domains. Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za From: Anton Louw via Users <users(a)ovirt.org> Sent: 14 May 2020 14:49 To: users(a)ovirt.org Subject: [ovirt-users] Migrate hosted engine to standalone host Hi All, So I have been playing around a bit, and I would just like some recommendations. I moved my HE from an oVirt node to my VMware environment, basically running as a standalone host now. Is there anything I should look out for? I can see there is a problem when configuring the HE after the move, where it says that global maintenance is not enabled. How will this work if the hosted engine is not sitting on a oVirt node anymore? Any feedback\suggestions will be greatly appreciated. Thanks Anton Louw Cloud Engineer: Storage and Virtualization at Vox ________________________________ T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za<http://www.vox.co.za> [F]<https://www.facebook.com/voxtelecomZA> [T]<https://www.twitter.com/voxtelecom> [I]<https://www.instagram.com/voxtelecomza> [L]<https://www.linkedin.com/company/voxtelecom> [Y]<https://www.youtube.com/user/VoxTelecom> [#VoxBrand]<https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME> Disclaimer The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>.

1 0

Convert unmanaged Gluster to managed one
by Николаев Алексей 16 May '20

16 May '20

2 1

ovirt-node-ng-installer-4.4.0-2020051507.el8.iso does not support PREC5 raid controller ?
by bjkelley＠us.ibm.com 16 May '20

16 May '20

Trying to use my dell 2850 as ovirt node the install does not show the raid0 disk pair that ovirt-node-4.3.9 was able to use as install destination. The Installer shows no disk at all in system it has 6 seen by 4.3.9. Thanks Bryan

4 4

oVirt 4.4 new VM cannot be created in the datacenter other than Default?
by bjkelley＠us.ibm.com 16 May '20

16 May '20

So after setup of new DC and Storage and Host at 4.3 as the CPU technology is lower than the Hosted-Engine machine. when I try and create a VM the only DC choice is the Default one. Is this Normal or issue with 4.4? Thanks Bryan

2 1

Bridge not forwarding frames on node.
by s.danzi 15 May '20

15 May '20

Hi to all!I'm having an issue with networks bridges on ovirt node.It's look like this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1279161On VM I have a bridge between a tap device and network interface. On node side the interface is bridged with bond0 vlan 128 (bond0.128 lacp).When I ping an host on the other side of tap device I can see this:Arp request goes from my lan to the tap device on vm. Arp reply return from tap vm and bridge forward this to vm networks interface. Using tcpdump on vm interface on node I can see the arp reply, using tcpdump on bond0.128 or on bridge I can't see the arp reply. Arp request is forwarded from bond0.128 to vm net but arp reply isn't forwarded from vm net to bond0.128. Very strange.....

5 11

Glance disk images credentials oVirt4.4
by bjkelley＠us.ibm.com 15 May '20

15 May '20

So if I use this to build a VM and I setup Cloud_init to set user id and passwords. should I not be able to login to the VM from Console? Bryan

2 1

[ANN] oVirt 4.4.0 Second Release Candidate is now available for testing
by Lev Veyde 15 May '20

15 May '20

oVirt 4.4.0 Second Release Candidate is now available for testing The oVirt Project is excited to announce the availability of oVirt 4.4.0 Second Release Candidate for testing, as of May 15th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. Some of the features included in oVirt 4.4.0 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

POWER9 Support: VDSM requiring LVM2 package that's missing
by Vinícius Ferrão 15 May '20

15 May '20

Hello, I would like to know if this is a bug or not, if yes I will submit to Red Hat. I’m trying to add a ppc64le (POWER9) machine to the hosts pool, but there’s missing dependencies on VDSM: --> Processing Dependency: lvm2 >= 7:2.02.186-7.el7_8.1 for package: vdsm-4.30.44-1.el7ev.ppc64le --> Finished Dependency Resolution Error: Package: vdsm-4.30.44-1.el7ev.ppc64le (rhel-7-server-rhv-4-mgmt-agent-for-power-9-rpms) Requires: lvm2 >= 7:2.02.186-7.el7_8.1 Available: 7:lvm2-2.02.171-8.el7.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.171-8.el7 Available: 7:lvm2-2.02.177-4.el7.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.177-4.el7 Available: 7:lvm2-2.02.180-8.el7.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-8.el7 Available: 7:lvm2-2.02.180-10.el7_6.1.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-10.el7_6.1 Available: 7:lvm2-2.02.180-10.el7_6.2.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-10.el7_6.2 Available: 7:lvm2-2.02.180-10.el7_6.3.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-10.el7_6.3 Available: 7:lvm2-2.02.180-10.el7_6.7.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-10.el7_6.7 Available: 7:lvm2-2.02.180-10.el7_6.8.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-10.el7_6.8 Installing: 7:lvm2-2.02.180-10.el7_6.9.ppc64le (rhel-7-for-power-9-rpms) lvm2 = 7:2.02.180-10.el7_6.9 Thanks,

2 3

[ANN] oVirt 4.3.10 Fourth Release Candidate is now available for testing
by Lev Veyde 14 May '20

14 May '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Fourth Release Candidate for testing as of May 14th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Migrate hosted engine to standalone host
by Anton Louw 14 May '20

14 May '20

Hi All, So I have been playing around a bit, and I would just like some recommendations. I moved my HE from an oVirt node to my VMware environment, basically running as a standalone host now. Is there anything I should look out for? I can see there is a problem when configuring the HE after the move, where it says that global maintenance is not enabled. How will this work if the hosted engine is not sitting on a oVirt node anymore? Any feedback\suggestions will be greatly appreciated. Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

Unable to connect to cockpit
by Parth Dhanjal 14 May '20

14 May '20

Hey! I have a remote machine on which I have installed RHVH4.4 I'm unable to access the cockpit-plugin. journalctl -u cockpit returns this error cockpit-tls: gnutls_handshake failed: A TLS fatal alert has been received. Screenshot while trying to reach cockpit through the browser attached. Is anyone else facing this issue as well? And does anyone has a solution/workaround to this?

6 7

Networking documentation
by s.danzi 14 May '20

14 May '20

Hello!In this page https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks.html there are a link to https://www.ovirt.org/documentation/admin-guide/Marking_vNIC_as_Passthrough that does not work. Does anyone have the correct link?

2 1

Can't add freshly installed node.. host has no default route
by Giorgio Biacchi 13 May '20

13 May '20

Hi list, I've spent a couple of days trying to understand why this was happening... For the installation I have a well tested installation server with a custom kickstart file to setup ssh keys and custom hooks for infiniband and I'm installing Ovirt Node 4.3.9 via pxe, this is particularly useful when I have to install a bunch of blades at once.. In the past I had no issues and all was working like a charm until now when some hardware failed and I had to replace it. As expected I have no issues in the node installation process.. the troubles begins when I try to add the node, installation fails and in the UI I have an exclamation mark with the message "Host has no default route." but I can ping and do ssh to the host from the manager.. the problem is somewhere else in the communication between the engine and vdsmd preventing the engine to refresh the host capabilities. So from the engine I tried: [root@manager ~]# openssl s_client -connect 172.20.22.78:54321 CONNECTED(00000003) --- Certificate chain 0 s:/CN=cn128.lagrange.di.unimi.it/O=VDSM Certificate i:/CN=VDSM Certificate Authority 1 s:/CN=VDSM Certificate Authority i:/CN=VDSM Certificate Authority --- The host has still the self signed vdsm certificate.. and on the host in vdsm.log I find: 2020-05-11 09:52:25,433+0000 ERROR (Reactor thread) [ProtocolDetector.SSLHandshakeDispatcher] ssl handshake: SSLError, address: ::ffff:159.149.129.220 (sslutils:264) So I tried to enroll the certificate from the UI and from the events tab I sow the enrolling was successful but: [root@manager ~]# openssl s_client -connect 172.20.22.78:54321 140084336994192:error:140790E5:SSL routines:ssl23_write:ssl handshake failure:s23_lib.c:177: CONNECTED(00000003) --- no peer certificate available --- there's still some issue with the certificates.. so on the host again: [root@cn128 vdsm]# find /etc/pki/vdsm/ -type f -cmin -10| xargs ls -l -rw-------. 1 root kvm 1424 May 11 09:56 /etc/pki/vdsm/certs/cacert.pem -rw-------. 1 root kvm 5108 May 11 09:57 /etc/pki/vdsm/certs/vdsmcert.pem -r--r-----. 1 root kvm 1704 May 11 09:56 /etc/pki/vdsm/keys/vdsmkey.pem -rw-r--r--. 1 root root 1424 May 11 09:57 /etc/pki/vdsm/libvirt-spice/ca-cert.pem -rw-r--r--. 1 root root 5108 May 11 09:57 /etc/pki/vdsm/libvirt-spice/server-cert.pem -r--r-----. 1 root root 1704 May 11 09:56 /etc/pki/vdsm/libvirt-spice/server-key.pem It seems that cacert.pem and vdsmcert.pem have wrong permissions.. let's try to fix it.. [root@cn128 vdsm]# chown 36:36 /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/certs/vdsmcert.pem And now: [root@manager ~]# openssl s_client -connect 172.20.22.78:54321| less CONNECTED(00000003) --- Certificate chain 0 s:/O=lagrange.di.unimi.it/CN=172.20.22.78 i:/C=US/O=lagrange.di.unimi.it/CN=cn305.lagrange.di.unimi.it.35941 1 s:/C=US/O=lagrange.di.unimi.it/CN=cn305.lagrange.di.unimi.it.35941 i:/C=US/O=lagrange.di.unimi.it/CN=cn305.lagrange.di.unimi.it.35941 --- Now I can finally refresh the host capabilities and setup the host networks.. In attachment all the relevant logs, I don't know if I've found some bug.. this is the first time i had so many troubles adding a new host.. so I decided to share my experience with the list.. Cheers -- gb PGP Key: http://pgp.mit.edu/ Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34

5 12

Any official support list of SAS RAID controller?
by hkexdong＠yahoo.com.hk 13 May '20

13 May '20

I am not going to use those servers from HP, IBM, etc. My computer is desktop level and plan to insert a PCI-E SAS RAID controller card, that use to connect to an external SAN storage (https://www.areca.com.tw/products/storage-8042.html) I afraid I might buy the wrong RAID card that oVirt can't recognize. Is there any official support list of SAS RAID controller?

2 2

he_gluster_vars.json for HCI deployment ovirt 4.3.x
by adrianquintero＠gmail.com 13 May '20

13 May '20

Hello, I am trying to find all the possible variables that can be passed inside /etc/ansible/roles/gluste.ansible/playbooks/hc-ansible-deployment/he_gluster_vars.json for an Hyperconverged deployment. RHHI 1.6/1.7 only offers a limited list thank you, Adrian

1 1

Re: ovirt, SATA for VM Disks
by Michal Skrivanek 12 May '20

12 May '20

> On 12 May 2020, at 17:09, kubuntu70(a)gmail.com wrote: > > is it possible to change the Interface to SATA? (like KVM) yes. SATA is used with q35 VMs (default in 4.4)

2 1

Re: 503 Service Unavailable
by Yedidyah Bar David 12 May '20

12 May '20

On Tue, May 12, 2020 at 11:02 AM Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > > Apologies, for got to add the below in the previous mail. > > > > I do see a few of these “Bad Gateway” errors in the engine.log as well, not sure what this means though: > > > > [root@virt ovirt-engine]# tail -f engine.log > > 2020-05-12 09:48:03,941+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-35) [52bf537e] Lock freed to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' > > 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'default' is using 0 threads out of 1, 5 threads waiting for tasks. > > 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'engine' is using 0 threads out of 500, 16 threads waiting for tasks and 0 tasks in queue. > > 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'engineScheduled' is using 0 threads out of 100, 100 threads waiting for tasks. > > 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'engineThreadMonitoring' is using 1 threads out of 1, 0 threads waiting for tasks. > > 2020-05-12 09:53:00,274+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'hostUpdatesChecker' is using 0 threads out of 5, 2 threads waiting for tasks. > > 2020-05-12 09:53:03,951+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Lock Acquired to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' > > 2020-05-12 09:53:03,959+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Running command: SyncNetworkProviderCommand internal: true. > > 2020-05-12 09:53:04,018+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error Bad Gateway and code 5050) > > 2020-05-12 09:53:04,019+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Lock freed to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' > > 2020-05-12 09:58:04,028+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Lock Acquired to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' > > 2020-05-12 09:58:04,036+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Running command: SyncNetworkProviderCommand internal: true. > > 2020-05-12 09:58:04,327+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error Bad Gateway and code 5050) > > 2020-05-12 09:58:04,328+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Lock freed to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' > > > > > Anton Louw > Cloud Engineer: Storage and Virtualization at Vox > ________________________________ > T: 087 805 0000 | D: 087 805 1572 > M: N/A > E: anton.louw(a)voxtelecom.co.za > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > > > > > > > From: Anton Louw > Sent: 12 May 2020 10:00 > To: Yedidyah Bar David <didi(a)redhat.com> > Cc: users(a)ovirt.org > Subject: RE: [ovirt-users] 503 Service Unavailable > > > > Thanks for the reply Didi. > > > > I have checked the logs, but it does not seem to show anything when I try and access the WebUI. I run tail -f engine.log and tail -f server.log, but it remains still. This is the same case with the httpd logs. If you don't see anything in any of the httpd logs, it means the request that your browser sent didn't arrive to httpd. Perhaps indeed you have some networking issue? Can you ping/ssh/etc from inside the engine some machine outside (other than the host it's on)? The other way around - from the engine vm to outside? If not, you should first fix that. That said, I'd not expect a 503 in that case, but a timeout on your browser. So either you didn't check the right log file (or there is some other problem, such as full disk, iptables, whatever) or some other machine returns you 503. You can also check with a sniffer (tcpdump) on the engine machine to see if it gets traffic, e.g. tcpdump -i any port 80 or port 443 > > > > I checked the status of the engine from my node, and it displays the below: > > > > [root@jb2-client-node01 ~]# hosted-engine --vm-status > > > > > > !! Cluster is in GLOBAL MAINTENANCE mode !! > > > > > > > > --== Host jb2-client-node01.kvm.voxvm.co.za (id: 1) status ==-- > > > > conf_on_shared_storage : True > > Status up-to-date : True > > Hostname : jb2-client-node01.kvm.voxvm.co.za > > Host ID : 1 > > Engine status : {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} I am not sure the HA services show something different for "Can't connect to the engine at all" vs "Health page didn't say it's healthy". > > Score : 3400 > > stopped : False > > Local maintenance : False > > crc32 : 75d3e273 > > local_conf_timestamp : 3547513 > > Host timestamp : 3547513 > > Extra metadata (valid at timestamp): > > metadata_parse_version=1 > > metadata_feature_version=1 > > timestamp=3547513 (Tue May 12 09:43:29 2020) > > host-id=1 > > score=3400 > > vm_conf_refresh_time=3547513 (Tue May 12 09:43:29 2020) > > conf_on_shared_storage=True > > maintenance=False > > state=GlobalMaintenance > > stopped=False > > > > Everything network related seems to run fine, I can connect to the engine via ssh etc. as well. > > > > > > > > From: Yedidyah Bar David <didi(a)redhat.com> > Sent: 12 May 2020 09:26 > To: Anton Louw <Anton.Louw(a)voxtelecom.co.za> > Cc: users(a)ovirt.org > Subject: Re: [ovirt-users] 503 Service Unavailable > > > > On Tue, May 12, 2020 at 9:53 AM Anton Louw via Users <users(a)ovirt.org> wrote: > > > > > > > > Hi All, > > > > > > > > So due to some bad decisions etc. I have accidently removed the hosted engine setup by running engine-cleanup. I initially just wanted to remove the websocket proxy, and as advised by an article, this can be done by running engine-cleanup. Obviously this was not the case, and it removed everything. > > Not necessarily everything, but even if you ask to remove only > something specific, it does more than that. We recently decided this > is too risky and removed that question: > > https://bugzilla.redhat.com/show_bug.cgi?id=1792874 > > > > > > > > > I at least had a backup that I took, so I restored the backup to the engine, and ran engine-setup. Everything runs fine, but when I try and access the webUI, I get an error: “503 Service Unavailable” “No server is available to handle this request” > > > > > > > > I have checked the ovirt-engine service, and it is running, as well as the httpd service. > > > > > > > > I have also attached the engine log as well as the server log. > > 1. When attaching complete logs (thanks for that!), please state the > exact time you tried > to do something that failed (access the web ui, in this case). Your > attached logs have > several different ERRORs, which might be due to unrelated things, and > it's hard to tell > where to look first. Once found, going backwards to try to find the > root cause is usually > easier. > > 2. Please check/share also httpd logs, and also /etc/httpd/conf.d - > you can compare it > with a fresh engine you can setup on some test vm somewhere, it should > be mostly the > same. > > 3. Also please check/share engine-setup logs, at > /var/log/ovirt-engine/setup. You can search > there for httpd or apache. > > 4. I have a feeling, just a guess, that you are missing > /etc/httpd/conf.d/z-ovirt-engine-proxy.conf . > Not sure what might have caused that. setup after cleanup should have > created it. > > Best regards, > > > > > > > > > Does anybody have any idea where I can check, or perhaps I missed something. > > > > > > > > Thank you > > > > > > Anton Louw > > Cloud Engineer: Storage and Virtualization at Vox > > ________________________________ > > T: 087 805 0000 | D: 087 805 1572 > > M: N/A > > E: anton.louw(a)voxtelecom.co.za > > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > > www.vox.co.za > > > > > > > > > > > > > > > > > > Disclaimer > > > > The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. > > > > This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here. > > > > > > > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FDUEFMIUCOMC4… > > > > -- > Didi > > -- Didi

2 1

Re: 503 Service Unavailable
by Anton Louw 12 May '20

12 May '20

Apologies, for got to add the below in the previous mail. I do see a few of these “Bad Gateway” errors in the engine.log as well, not sure what this means though: [root@virt ovirt-engine]# tail -f engine.log 2020-05-12 09:48:03,941+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-35) [52bf537e] Lock freed to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'default' is using 0 threads out of 1, 5 threads waiting for tasks. 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'engine' is using 0 threads out of 500, 16 threads waiting for tasks and 0 tasks in queue. 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'engineScheduled' is using 0 threads out of 100, 100 threads waiting for tasks. 2020-05-12 09:53:00,273+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'engineThreadMonitoring' is using 1 threads out of 1, 0 threads waiting for tasks. 2020-05-12 09:53:00,274+02 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread pool 'hostUpdatesChecker' is using 0 threads out of 5, 2 threads waiting for tasks. 2020-05-12 09:53:03,951+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Lock Acquired to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' 2020-05-12 09:53:03,959+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Running command: SyncNetworkProviderCommand internal: true. 2020-05-12 09:53:04,018+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error Bad Gateway and code 5050) 2020-05-12 09:53:04,019+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [3546d22f] Lock freed to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' 2020-05-12 09:58:04,028+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Lock Acquired to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' 2020-05-12 09:58:04,036+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Running command: SyncNetworkProviderCommand internal: true. 2020-05-12 09:58:04,327+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error Bad Gateway and code 5050) 2020-05-12 09:58:04,328+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Lock freed to object 'EngineLock:{exclusiveLocks='[44725bec-4d4a-496d-bd05-97eff7996a61=PROVIDER]', sharedLocks=''}' From: Anton Louw Sent: 12 May 2020 10:00 To: Yedidyah Bar David <didi(a)redhat.com> Cc: users(a)ovirt.org Subject: RE: [ovirt-users] 503 Service Unavailable Thanks for the reply Didi. I have checked the logs, but it does not seem to show anything when I try and access the WebUI. I run tail -f engine.log and tail -f server.log, but it remains still. This is the same case with the httpd logs. I checked the status of the engine from my node, and it displays the below: [root@jb2-client-node01 ~]# hosted-engine --vm-status !! Cluster is in GLOBAL MAINTENANCE mode !! --== Host jb2-client-node01.kvm.voxvm.co.za (id: 1) status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : jb2-client-node01.kvm.voxvm.co.za Host ID : 1 Engine status : {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} Score : 3400 stopped : False Local maintenance : False crc32 : 75d3e273 local_conf_timestamp : 3547513 Host timestamp : 3547513 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=3547513 (Tue May 12 09:43:29 2020) host-id=1 score=3400 vm_conf_refresh_time=3547513 (Tue May 12 09:43:29 2020) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False Everything network related seems to run fine, I can connect to the engine via ssh etc. as well. From: Yedidyah Bar David <didi(a)redhat.com<mailto:didi@redhat.com>> Sent: 12 May 2020 09:26 To: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>> Cc: users(a)ovirt.org<mailto:users@ovirt.org> Subject: Re: [ovirt-users] 503 Service Unavailable On Tue, May 12, 2020 at 9:53 AM Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>> wrote: > > > > Hi All, > > > > So due to some bad decisions etc. I have accidently removed the hosted engine setup by running engine-cleanup. I initially just wanted to remove the websocket proxy, and as advised by an article, this can be done by running engine-cleanup. Obviously this was not the case, and it removed everything. Not necessarily everything, but even if you ask to remove only something specific, it does more than that. We recently decided this is too risky and removed that question: https://bugzilla.redhat.com/show_bug.cgi?id=1792874<https://bugzilla.redhat.com/show_bug.cgi?id=1792874> > > > > I at least had a backup that I took, so I restored the backup to the engine, and ran engine-setup. Everything runs fine, but when I try and access the webUI, I get an error: “503 Service Unavailable” “No server is available to handle this request” > > > > I have checked the ovirt-engine service, and it is running, as well as the httpd service. > > > > I have also attached the engine log as well as the server log. 1. When attaching complete logs (thanks for that!), please state the exact time you tried to do something that failed (access the web ui, in this case). Your attached logs have several different ERRORs, which might be due to unrelated things, and it's hard to tell where to look first. Once found, going backwards to try to find the root cause is usually easier. 2. Please check/share also httpd logs, and also /etc/httpd/conf.d - you can compare it with a fresh engine you can setup on some test vm somewhere, it should be mostly the same. 3. Also please check/share engine-setup logs, at /var/log/ovirt-engine/setup. You can search there for httpd or apache. 4. I have a feeling, just a guess, that you are missing /etc/httpd/conf.d/z-ovirt-engine-proxy.conf . Not sure what might have caused that. setup after cleanup should have created it. Best regards, > > > > Does anybody have any idea where I can check, or perhaps I missed something. > > > > Thank you > > > Anton Louw > Cloud Engineer: Storage and Virtualization at Vox > ________________________________ > T: 087 805 0000 | D: 087 805 1572 > M: N/A > E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za<http://www.vox.co.za> > > > > > > > > > Disclaimer > > The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here. > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> > Privacy Statement: https://www.ovirt.org/privacy-policy.html<https://www.ovirt.org/privacy-policy.html> > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://www.ovirt.org/community/about/community-guidelines> > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FDUEFMIUCOMC4…<https://lists.ovirt.org/archives/list/users@ovirt.org/message/FDUEFMIUCOMC4…> -- Didi Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

Re: 503 Service Unavailable
by Yedidyah Bar David 12 May '20

12 May '20

On Tue, May 12, 2020 at 9:53 AM Anton Louw via Users <users(a)ovirt.org> wrote: > > > > Hi All, > > > > So due to some bad decisions etc. I have accidently removed the hosted engine setup by running engine-cleanup. I initially just wanted to remove the websocket proxy, and as advised by an article, this can be done by running engine-cleanup. Obviously this was not the case, and it removed everything. Not necessarily everything, but even if you ask to remove only something specific, it does more than that. We recently decided this is too risky and removed that question: https://bugzilla.redhat.com/show_bug.cgi?id=1792874 > > > > I at least had a backup that I took, so I restored the backup to the engine, and ran engine-setup. Everything runs fine, but when I try and access the webUI, I get an error: “503 Service Unavailable” “No server is available to handle this request” > > > > I have checked the ovirt-engine service, and it is running, as well as the httpd service. > > > > I have also attached the engine log as well as the server log. 1. When attaching complete logs (thanks for that!), please state the exact time you tried to do something that failed (access the web ui, in this case). Your attached logs have several different ERRORs, which might be due to unrelated things, and it's hard to tell where to look first. Once found, going backwards to try to find the root cause is usually easier. 2. Please check/share also httpd logs, and also /etc/httpd/conf.d - you can compare it with a fresh engine you can setup on some test vm somewhere, it should be mostly the same. 3. Also please check/share engine-setup logs, at /var/log/ovirt-engine/setup. You can search there for httpd or apache. 4. I have a feeling, just a guess, that you are missing /etc/httpd/conf.d/z-ovirt-engine-proxy.conf . Not sure what might have caused that. setup after cleanup should have created it. Best regards, > > > > Does anybody have any idea where I can check, or perhaps I missed something. > > > > Thank you > > > Anton Louw > Cloud Engineer: Storage and Virtualization at Vox > ________________________________ > T: 087 805 0000 | D: 087 805 1572 > M: N/A > E: anton.louw(a)voxtelecom.co.za > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > > > > > > > > Disclaimer > > The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here. > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FDUEFMIUCOMC4… -- Didi

2 1

503 Service Unavailable
by Anton Louw 12 May '20

12 May '20

Hi All, So due to some bad decisions etc. I have accidently removed the hosted engine setup by running engine-cleanup. I initially just wanted to remove the websocket proxy, and as advised by an article, this can be done by running engine-cleanup. Obviously this was not the case, and it removed everything. I at least had a backup that I took, so I restored the backup to the engine, and ran engine-setup. Everything runs fine, but when I try and access the webUI, I get an error: "503 Service Unavailable" "No server is available to handle this request" I have checked the ovirt-engine service, and it is running, as well as the httpd service. I have also attached the engine log as well as the server log. Does anybody have any idea where I can check, or perhaps I missed something. Thank you Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

oVirt engine / node & snmp
by Andrei Verovski 12 May '20

12 May '20

Hi, oVirt node seems to run snmp by defeult, “service snmpd status” returns some data. I’m going to connect all servers to LibreNMS, and it requires custom snmp options. What options I should keep in oVirt node default nsmp.conf? Or I may just fully overwrite this file with my own? Please note my oVirt node installed manually on CentOS, I don’t use node DVD image from oVirt project. with best regards Thanks in advance. Andrei

2 1