- Users - oVirt List Archives

Proxy setup for image repositories
by Gianluca Cecchi 08 May '20

08 May '20

Eg, for the default ovirt-image-repository storage domain, is it possible to setup a proxy server for access? Thanks Gianluca

2 1

ERROR [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand]
by Николаев Алексей 08 May '20

08 May '20

1 0

Re: Node Unresponsive
by Staniforth, Paul 07 May '20

07 May '20

Hi Anton, should be yum instead of dnf as it using centos7 Regards, Paul S. ________________________________ From: Anton Louw via Users <users(a)ovirt.org> Sent: 07 May 2020 15:22 To: Artur Socha <asocha(a)redhat.com>; users(a)ovirt.org <users(a)ovirt.org> Subject: [ovirt-users] Re: Node Unresponsive Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Artur, I tried running the dnf list --installed | egrep "ovirt|vdsm|jsonrpc" command, but that command is not found. I have attached the logs as requested. Thanks Anton Louw Cloud Engineer: Storage and Virtualization at Vox ________________________________ T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox.co…> [F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> [T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twitt…> [I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.insta…> [L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> [Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> From: Artur Socha <asocha(a)redhat.com> Sent: 07 May 2020 15:55 To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org Subject: Re: [ovirt-users] Node Unresponsive On Thu, 2020-05-07 at 13:07 +0000, Anton Louw via Users wrote: Hi All, One of my nodes went into a unresponsive state, but the VMs running on that host are still up. I just want to know, can I restart VDSM on that node, or will it impact the running VMs? In another article, somebody restarted the engine, and that resolved their issue. I would like to first test the VDSM and if that does not work, I will restart the engine. Hi Anton, Would it be possible to post /var/log/vdsm.log from that affected host + relevant engine.log? I am currently investigating engine-to-host connectivity issue that may or may not be related [1]. What are the exact versions of engine and vdsm packages? ( dnf list --installed | egrep "ovirt|vdsm|jsonrpc" ) [1] https://bugzilla.redhat.com/show_bug.cgi?id=1828669<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.…> thanks! Artur Thanks Anton Louw Cloud Engineer: Storage and Virtualization at Vox ________________________________ T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox.co…> [F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> [T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twitt…> [I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.insta…> [L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> [Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> [#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox.c…> Disclaimer The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.voxte…>. _______________________________________________ Users mailing list -- <mailto:users@ovirt.org> users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to <mailto:users-leave@ovirt.org> users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> https://www.ovirt.org/privacy-policy.html<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> oVirt Code of Conduct: <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> https://www.ovirt.org/community/about/community-guidelines/<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> List Archives: <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2SDQ32OZPQ7KG…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/

1 0

Automatic reply: [Non-DoD Source] Re: Node Unresponsive
by Mangin, Samuel R CIV USN (USA) 07 May '20

07 May '20

Be it known that I no longer work for NAVOCEANO. I have transferred to the Air Force. If you need assistance please submit Ripken Ticket or call the Help Desk at x5122. V/r Sam

1 0

Re: Node Unresponsive
by Anton Louw 07 May '20

07 May '20

Oh I see, so just the service. Perfect, I will give that a bash as well. Just running through a couple more things. Thanks Paul Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> Sent: 07 May 2020 16:20 To: Artur Socha <asocha(a)redhat.com>; Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org Subject: Re: [ovirt-users] Re: Node Unresponsive Hi Anton, I wasn't considering the hosted-engine just in the engine VM systemctl restart ovirt-engine.service Regards, Paul S. ________________________________ From: Artur Socha <asocha(a)redhat.com<mailto:asocha@redhat.com>> Sent: 07 May 2020 14:54 To: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] Re: Node Unresponsive Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. On Thu, 2020-05-07 at 13:07 +0000, Anton Louw via Users wrote: Hi All, One of my nodes went into a unresponsive state, but the VMs running on that host are still up. I just want to know, can I restart VDSM on that node, or will it impact the running VMs? In another article, somebody restarted the engine, and that resolved their issue. I would like to first test the VDSM and if that does not work, I will restart the engine. Hi Anton, Would it be possible to post /var/log/vdsm.log from that affected host + relevant engine.log? I am currently investigating engine-to-host connectivity issue that may or may not be related [1]. What are the exact versions of engine and vdsm packages? ( dnf list --installed | egrep "ovirt|vdsm|jsonrpc" ) [1] https://bugzilla.redhat.com/show_bug.cgi?id=1828669<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.…> thanks! Artur Thanks Anton Louw Cloud Engineer: Storage and Virtualization at Vox ________________________________ T: 087 805 0000 | D: 087 805 1572 M: N/A E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox.co…> [F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> [T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twitt…> [I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.insta…> [L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> [Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> [#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox.c…> Disclaimer The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices. This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.voxte…>. _______________________________________________ Users mailing list -- <mailto:users@ovirt.org> users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to <mailto:users-leave@ovirt.org> users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> https://www.ovirt.org/privacy-policy.html<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> oVirt Code of Conduct: <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> https://www.ovirt.org/community/about/community-guidelines/<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> List Archives: <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2SDQ32OZPQ7KG…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>

1 0

Re: Node Unresponsive
by Artur Socha 07 May '20

07 May '20

On Thu, 2020-05-07 at 13:07 +0000, Anton Louw via Users wrote: > > > > Hi All, > > > > One of my nodes went into a unresponsive state, but the VMs running on that > host are still up. I just want to know, can I restart VDSM on that node, or > will it impact the running VMs? In another article, somebody restarted > the engine, and that resolved their issue. I would like to first test the > VDSM and if that does not work, I will restart the engine. > Hi Anton,Would it be possible to post /var/log/vdsm.log from that affected host + relevant engine.log? I am currently investigating engine-to-host connectivity issue that may or may not be related [1]. What are the exact versions of engine and vdsm packages? ( dnf list --installed | egrep "ovirt|vdsm|jsonrpc" ) [1] https://bugzilla.redhat.com/show_bug.cgi?id=1828669 thanks!Artur > > Thanks > > > > > > > > Anton Louw > > > Cloud Engineer: Storage and Virtualization at Vox > > > > > > > T: 087 805 0000 | D: 087 805 1572 > M: N/A > > E: anton.louw(a)voxtelecom.co.za > A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > > www.vox.co.za > > > > > > > > > > > > > > > > > > > > > > Disclaimer > The contents of this email are confidential to the sender and the intended > recipient. Unless the contents are clearly and entirely of a personal nature, > they are subject to copyright in favour of the holding company of the Vox > group of companies. Any recipient who receives this email in error should > immediately report the error to the sender and permanently delete this email > from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by Mimecast Ltd, an innovator in Software as a Service > (SaaS) for business. Providing a safer and more useful place for your human > generated data. Specializing in; Security, archiving and compliance. To find > out more Click Here. > > > > > > > > > > _______________________________________________Users mailing list -- > users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2SDQ32OZPQ7KG…

3 2

Node Unresponsive
by Anton Louw 07 May '20

07 May '20

Hi All, One of my nodes went into a unresponsive state, but the VMs running on that host are still up. I just want to know, can I restart VDSM on that node, or will it impact the running VMs? In another article, somebody restarted the engine, and that resolved their issue. I would like to first test the VDSM and if that does not work, I will restart the engine. Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

Ubuntu 18.04 and 16.04 cloud images hang at boot up
by suaro＠live.com 07 May '20

07 May '20

I'm using oVirt 4.3 (latest ) and able to successfully provision Centos VMs without any problems. When I attempt to provision Ubuntu VMs, they hang at startup. The console shows : ... ... [ 4.010016] Btrfs loaded [ 101.268594] random: nonblocking pool is initialized It stays like this indefinitely. Again, I have no problems with Centos images, but need Ubuntu Any tips greatly appreciated.

3 2

[ANN] oVirt 4.3.10 Third Release Candidate is now available for testing
by Lev Veyde 07 May '20

07 May '20

The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Third Release Candidate for testing as of May 6th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but < 8) * CentOS Linux (or similar) 7.7 or later (but < 8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available[2] Additional Resources: * Read more about the oVirt 4.3.10 release highlights: http://www.ovirt.org/release/4.3.10/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.10/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

oVirt 4.4.0 First Release Candidate is now available for testing!
by Sandro Bonazzola 07 May '20

07 May '20

The oVirt Project is excited to announce the availability of the first Release Candidate of oVirt 4.4.0 for testing, as of May 6th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. Some of the features included in oVirt 4.4.0 Release Candidate require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Release Candidate? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

Fwd: Install of new ovirt baremetal system 4.3.9
by Anton Marchukov 07 May '20

07 May '20

Forwarding to oVirt users list since it looks to be better suited there. ---------- Forwarded message --------- From: kelley bryan <kelley.bryan10(a)gmail.com> Date: Wed, May 6, 2020 at 12:02 PM Subject: Install of new ovirt baremetal system 4.3.9 To: <infra(a)ovirt.org> Engine deployment fails near end: [ ERROR ] fatal: [localhost]: FAILED! => {"changed": true, "cmd": "set -euo pipefail && firewall-cmd --get-active-zones | grep -v \"^\\s*interfaces\"", "delta": "0:00:00.352904", "end": "2020-05-05 22:28:01.561606", "msg": "non-zero return code", "rc": 1, "start": "2020-05-05 22:28:01.208702", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} were does ovirt store logs? _______________________________________________ Infra mailing list -- infra(a)ovirt.org To unsubscribe send an email to infra-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/infra@ovirt.org/message/XALRUKVRYFC2N… -- Anton Marchukov Associate Manager - RHV DevOps - Red Hat

4 4

Fwd: Ovirt host GetGlusterVolumeHealInfoVDS failed events
by Anton Marchukov 07 May '20

07 May '20

Forwarding to oVirt users list. ---------- Forwarded message --------- From: <srivathsa.puliyala(a)dunami.com> Date: Wed, May 6, 2020 at 12:01 PM Subject: Ovirt host GetGlusterVolumeHealInfoVDS failed events To: <infra(a)ovirt.org> Hi, We have a oVirt cluster with 4 hosts and hosted engine running on one of them (all the nodes provide the storage with GlusterFS) Currently there are 53 VMs running. The version of the oVirt-Engine is 4.2.8.2-1.el7 and GlusterFS is 3.12.15. From past 1 week, we seem to have multiple events popping up on Ovirt-UI about the GetGlusterVolumeHealInfoVDS from all the nodes randomly like one ERROR event for every ~13minutes. Sample Event dashboard example: May 4, 2020, 2:32:14 PM - Status of host <host-1> was set to Up. May 4, 2020, 2:32:11 PM - Manually synced the storage devices from host <host-1> May 4, 2020, 2:31:55 PM - Host <host-1> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 2:31:55 PM - VDSM <host-1> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues May 4, 2020, 2:19:14 PM - Status of host <host-2> was set to Up. May 4, 2020, 2:19:12 PM - Manually synced the storage devices from host <host-2> May 4, 2020, 2:18:49 PM - Host <host-2> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 2:18:49 PM - VDSM <host-2> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues May 4, 2020, 2:05:55 PM - Status of host <host-2> was set to Up. May 4, 2020, 2:05:54 PM - Manually synced the storage devices from host <host-2> May 4, 2020, 2:05:35 PM - Host <host-2> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 2:05:35 PM - VDSM <host-2> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues May 4, 2020, 1:52:45 PM - Status of host <host-3> was set to Up. May 4, 2020, 1:52:44 PM - Manually synced the storage devices from host <host-3> May 4, 2020, 1:52:22 PM - Host <host-3> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 1:52:22 PM - VDSM <host-3> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues May 4, 2020, 1:39:11 PM - Status of host <host-4> was set to Up. May 4, 2020, 1:39:11 PM - Manually synced the storage devices from host <host-4> May 4, 2020, 1:39:11 PM - Host <host-4> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 1:39:11 PM - VDSM <host-4> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues May 4, 2020, 1:26:29 PM - Status of host <host-3> was set to Up. May 4, 2020, 1:26:28 PM - Manually synced the storage devices from host <host-3> May 4, 2020, 1:26:11 PM - Host <host-3> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 1:26:11 PM - VDSM <host-3> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues May 4, 2020, 1:13:10 PM - Status of host <host-1> was set to Up. May 4, 2020, 1:13:08 PM - Manually synced the storage devices from host <host-1> May 4, 2020, 1:12:51 PM - Host <host-1> is not responding. Host cannot be fenced automatically because power management for the host is disabled. May 4, 2020, 1:12:51 PM - VDSM <host-1> command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues and so on..... When I look at the Compute > Hosts dashboard, I see the host status to be DOWN when VDSM event (GetGlusterVolumeHealInfoVDS failed) is popped and automatically the host status is set to UP within no time. FYI: when host status is DOWN, the VM's running on that host are not migrating and everything is running perfectly fine. This is happening all day. Is there something I can troubleshoot? Appreciate your comments. _______________________________________________ Infra mailing list -- infra(a)ovirt.org To unsubscribe send an email to infra-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/infra@ovirt.org/message/GNE3QC7GLEER4… -- Anton Marchukov Associate Manager - RHV DevOps - Red Hat

2 1

Contribution opportunity: oVirt website links maintenance
by Sandro Bonazzola 06 May '20

06 May '20

Hi, oVirt website accumulated a good amount of broken links over the years. You can see them listed in this etherpad: https://review.rdoproject.org/etherpad/p/SLEq1-6FwW9aw7344eRr You can help fixing the links by edit text files written in markdown language, it's pretty easy to understand and can be done even by somebody without any development skill. This is a good chance to contribute back to oVirt project, looking forward to review your patches at https://github.com/oVirt/ovirt-site ! Thanks! -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> [image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

Safe to go to 7.8 for CentOS based hypervisors?
by Gianluca Cecchi 06 May '20

06 May '20

Hello, supposing to be already at 4.3.9 level and to have CentOS 7.7 based hosts, are there any blocking factors to update them to 7.8, just released some days ago? Thanks, Gianluca

2 1

NFS storage domain forced to use /exports/data ?
by kelley bryan 06 May '20

06 May '20

Hello Should the documentation point out that the /exports/data mount point is hard coded in ovirt-hosted-engine-setup-ansible-create_storage_domain.yaml. I think some Data Centers will want to use a different mount path or Did I miss a prompt or entry in the Deployment screen for Hosted-engine-deployment? Bryan

1 1

Unable to import CA certificate list
by Sakari Poussa 06 May '20

06 May '20

Hi, I am using 4.4 beta4 and not able to add new hosts to the datacenter. Also "Enroll Certificate" fails. On nodes, I get the following error message: libvirtd[20399]: Unable to import CA certificate list /etc/pki/vdsm/certs/cacert.pem The root cause is the malformed cert: $ cat /etc/pki/vdsm/certs/cacert.pem -----BEGIN CERTIFICATE-----\nMIID XXX That, is the .pem file is just one long line with \n characters instead of real newlines. If I convert the \n to real newlines libvirtd starts but that is not the end solution since other issues surfaces. The malforming happens when the engine copies (via ansible) the CA cert to the node(s). Any ideas what is going on? Thanks, Sakari

2 6

Backup software recommendations
by Colin Coe 06 May '20

06 May '20

Hi all I'm looking for recommendations for backup software. It needs to handle physical and virtual Linux and Windows, RHV and Hyper-V. It doesn't have to be open source and it doesn't have to be free. The main features we need are: - disk to disk backups - inter-site replication with rate limiting - be able to handle Linux thin volumes (think RHGS) - support BMR ans granular file / directory restore - correctly handle Windows VSS - support RHEL point releases as soon as they are released I'm as much after "stay away from" as recommendations. We currently use Arcserve UDP and it is ... well ... sub optimal Thanks in advance CC

3 4

VM Portal --> Windows SSO
by Andrey Rusakov 05 May '20

05 May '20

Hi, Resently I configure oVirt, FreeIPA and Windows Guest VM. I would like to SSO to Windows VM thrue VM portal or Rest API (dowloading spice config) or Admin Port ... I don't see any login attemps in log file, errors, or ... I found a lot of docs for SSO setup - it is so simple (Agent, Correct Domain name in login profile ...), But at the end i found that SSO module was deleted from 4.3 agent. Is it true? The major question - Is it working ?

1 0

Requesting Permission to Post
by Daniel S 05 May '20

05 May '20

1 0

node down due to gluster storage
by suporte＠logicworks.pt 05 May '20

05 May '20

Hello, I'm running an ovirt 2 nodes and 2 gluster storages. The second gluster sotrage is down due to an hardware problem The node 1 is allways trying to connect to the second storage and does not come up. I'm running 4.3.6 version Any idea? thanks -- Jose Ferradeira http://www.logicworks.pt

4 3

Gluster deployment fails with missing UUID
by Shareef Jalloq 05 May '20

05 May '20

Hi, I'm running the gluster deployment flow and am trying to use a second drive as the gluster volume. It's /dev/sdb on each node and I'm using the JBOD mode. I'm seeing the following gluster ansible task fail and a google search doesn't bring up much. TASK [gluster.infra/roles/backend_setup : Create volume groups] **************** failed: [ovirt-gluster-01.jalloq.co.uk] (item={u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}) => {"ansible_loop_var": "item", "changed": false, "err": " Couldn't find device with uuid Y8FVs8-LP6w-R6CR-Yosh-c40j-17XP-ttP3Np.\n Couldn't find device with uuid tA4lpO-hM9f-S8ci-BdPh-lTve-0Rh1-3Bcsfy.\n Couldn't find device with uuid RG3w6j-yrxn-2iMw-ngd0-HgMS-i5dP-CGjaRk.\n Couldn't find device with uuid lQV02e-TUZE-PXCd-GWEd-eGqe-c2xC-pauHG7.\n Device /dev/sdb excluded by a filter.\n", "item": {"pvname": "/dev/sdb", "vgname": "gluster_vg_sdb"}, "msg": "Creating physical volume '/dev/sdb' failed", "rc": 5}

4 11

stty: standard tty: inappropriate ioctl for device
by Charles Kozler 05 May '20

05 May '20

I'd like to share this with the list because its something that I changed for convenience, in .bashrc, but had a not so obvious rippling impact on the ovirt self hosted installer. I could imagine a few others doing this too and I'd rather save future them hours of google time Every install failed no matter what and it was always at the SSO step to revoke token (here: https://github.com/machacekondra/ansible/blob/71547905fab67a876450f95c9ca71…) and then reissue new token but the engine log yielded different information. The SSO failure was a red herring engine.log:2020-05-04 22:09:17,150-04 ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-1) [61038b68] Host installation failed for host '672be551-9259-4d2d-823d-07f586b4e0f1', 'node1': Unexpected error during execution: stty: standard input: Inappropriate ioctl for device engine.log:2020-05-04 22:09:17,145-04 ERROR [org.ovirt.engine.core.uutils.ssh.SSHDialog] (EE-ManagedThreadFactory-engine-Thread-1) [61038b68] SSH error running command root@node1:'umask 0077; MYTMP="$(TMPDIR="${OVIRT_TMPDIR}" mktemp -d -t ovirt-XXXXXXXXXX)"; trap "chmod -R u+rwX \"${MYTMP}\" > /dev/null 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; tar --warning=no-timestamp -C "${MYTMP}" -x && "${MYTMP}"/ovirt-host-deploy DIALOG/dialect=str:machine DIALOG/customization=bool:True': RuntimeException: Unexpected error during execution: stty: standard input: Inappropriate ioctl for device I was on the hunt for this for the better part of 2 days or so, because who else has anything to do during quarantine, wracking my brain and trying everything to figure out what was going on Well, it was my own fault # cat .bashrc | grep -i stty stty erase ^? With this set in the .bashrc of the node I was running the installer via cockpit from, ovirt installer will fail to install This was set for convenience to have backspace work in vim since at some point it stopped working for me Should I file this as a bug? The message generated is more of a warning then a failure but I do not know the internals of ovirt like that. Commands still actually execute fine ovirt-engine(a)192.168.222.84) # ssh 10.0.16.221 "uptime" root(a)10.0.16.221's password: stty: standard input: Inappropriate ioctl for device 22:30:01 up 22:45, 2 users, load average: 0.80, 0.62, 0.80 One thing I think should be called out in the docs, and called out very loud, is that the entire ovirt installer expects a clean 110% machine that is done right after install and provided and IP and hostname. Its not that obvious, but it is now

2 3

Sometimes VM fails to power on: device busy in adding vnet port
by Gianluca Cecchi 05 May '20

05 May '20

Hi, my environment info: centos-release.x86_64 7-7.1908.0.el7.centos glusterfs.x86_64 6.8-1.el7 ovirt-engine.noarch 4.3.9.4-1.el7 ovirt-release43.noarch 4.3.9-1.el7 I have an external agent (openstack staging_oviirt) that powers on/off VMs during bulk install. See also here some other details: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/B4CDWTAR7YLRLR… I repeat many times the installation for test purposes and during these phases the application powers on (through ostacpm user) about 8 VMs in the same moment. Sometimes it happens that one or more of them fail to start and in web admin gui I see this kind of sequence of events: VM ostack-ceph2 was started by ostackpm@internal-authz (Host: ovirt.mydomain). User <UNKNOWN> got disconnected from VM ostack-ceph2. VM ostack-ceph2 is down with error. Exit message: Unable to add bridge vlan23 port vnet21: Device or resource busy. Failed to run VM ostack-ceph2 on Host ovirt.mydomain Failed to run VM ostack-ceph2 (User: ostackpm@internal-authz). Soon I press the start button from web admin gui and the VM powers on without problems. I think this kind of problem doesn't depend on the rest api agent. Could it be a sort of bug or concurrency of power on commands? If I grep VM UUID and name of the VM for the one above, I get this in engine.log: https://drive.google.com/file/d/1QsedDqvlbvVPCifDNted4ipSsJ2GeBJV/view?usp=… On ovirt host I see: 2020-05-04 10:16:05,491+0200 ERROR (vm/38f806e7) [virt.vm] (vmId='38f806e7-5c48-4ffe-90e8-671b1a585256') The vm start process failed (vm:934) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 868, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2895, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 94, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1110, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: Unable to add bridge vlan23 port vnet21: Device or resource busy 2020-05-04 10:16:05,492+0200 INFO (vm/38f806e7) [virt.vm] (vmId='38f806e7-5c48-4ffe-90e8-671b1a585256') Changed state to Down: Unable to add bridge vlan23 port vnet21: Device or resource busy (code=1) (vm:1702) Let me know if you meed more information Gianluca

1 0

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 03 May '20

03 May '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh (beta 4) for testing, as of April 17th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tool, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps postgresql:12 - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

5 4

Engine UI exception while viewing unattached hosts in Network tab
by Shareef Jalloq 03 May '20

03 May '20

Hi, I'm following the Gluster setup blog post ( https://blogs.ovirt.org/2018/02/up-and-running-with-ovirt-4-2-and-gluster-s…) and am at the 'Storage network' section. I've created a new 'gluster' network, selected the network and navigated to the 'Hosts' tab. The guide tells you to click the 'Unattached' button and then 'Setup Host Networks' for each host. However, clicking the 'Unattached' button fires off a bunch of exceptions rather than displaying my 3 hosts. The message is: "Uncaught exception occurred. Please try reloading the page. Details: (TypeError) : Cannot read property 'N' of null Please have your administrator check the UI logs" Anyone seen this before? Where is the UI log located? Shareef.

3 3