- Users - oVirt List Archives

multiple subnets on hosts for vm's
by eevans＠digitaldatatechs.com 12 Apr '20

12 Apr '20

This is not critical but some functionality I think should be in Ovirt and maybe I am going about it the wrong way. I have several subnets on my physical network. My engine host is separate from the clustered hosts that house the vm's. In order for the vm's on the other subnets (vlans) to get Internet access, I have to add the extra ip addrs on the ovirtmgmt network interface. I have read and tried every solution I could find trying to add teh subnets without using the extra ip addrs option but the machine either becomes isolated or will not start at all. Can someone tell me how to add the vlans so the engine host sees and utilizes them? The engine host can get to resources on the vlans because of the router config but will not let any subnet except ovirtmgmt outside the cluster. This is not critical but something I would like to get working for future deployments. Thank you for your help. Eric

2 1

unsubscribe me please
by Raz Tamir 12 Apr '20

12 Apr '20

EOM -- Raz Tamir

1 0

Storage domain in maintenance
by Strahil Nikolov 11 Apr '20

11 Apr '20

Hello All, I have several storage domains in maintenance mode and I can't neither detach, nor activate. Can someone explain to me what is actually doing the engine whwn I try to activate - so I can debug it? The error from vdsm-client is that the storage domain does not exist, yet it is in the DB . I assume that there is somw storage issue, but in order to debug it - I need to know what is gooing on under the hood. Thanks in advance Best Regards, Strahil Nikolov

3 7

Windows 10 Pro 64 (1909) crashes when migrating
by Maton, Brett 11 Apr '20

11 Apr '20

I recently added a Windows 10 Pro 64 bit (release 1909) VM, and I'm seeing a lot of failures when oVirt tries to move the VM to another host (triggered by load balancing), These errors are showing up in the UI event log Migration failed (VM: <vm label>, Source: <host 1>, Destination: <host 2>). Followed by: VM <host> is down with error. Exit message: Lost connection with qemu process. Google returned some references to 'options kvm ignore_msrs=1' which I've added to /etc/modprobe/d/kvm.conf and restarted the hosts but that doesn't appear to have made a difference. Is this a known issue with Windows 10 guests?

3 7

Firewall GARP not reachable to VM
by k.betsis＠gmail.com 10 Apr '20

10 Apr '20

Hi all Does anyone know how i can allow my Firewall VM cluster act as the default gateway to VMs within the same network? I've configured the GARP functionality on the OPNSENSE firewalls (PFSENSE fork). VMs within the same network can ping the firewall IP addresses successfully but not the GARP IP. The ovirt network has been configured with the MAC Address Anti-spoofing to false. One firewall has been configured with virtio network drivers and the with e1000 both exhibiting the same behavior. Currently all VMs have been configured with a default gateway the primary firewall. Network workarounds using BGP and attributes can work, but are way to complicate to streamline for all VMs when a simple VRRP can do the job. Any ideas what i am missing?

2 1

Data domain down due to space crunch
by Crazy Ayansh 10 Apr '20

10 Apr '20

Hi Guys, I am using Ovirt 4.3.7 in my environment.I am using servers local storage for data domains. Today one of the servers data domain got full and due to this my VMs paused. [image: image.png] Now i am unable to export my VM as the storage in ovirt is down.....What should i do now.....any suggestions.....? Thanks

2 2

Ovirt and Dell Compellent in ISCSI
by dalmasso＠cines.fr 10 Apr '20

10 Apr '20

hi all, we use ovirt 4.3 on dell server r640 runing centos 7.7 and a storage bay Dell Compellent SCv3020 in ISCSI. We use two 10gb interfaces for iSCSI connection on each dell server. If we configure ISCSI connection directly from web IU, we can’t specify the two physical ethernet interface , and there are missing path . (only 4 path on 8) So, on the shell of hypervisor we use this commands for configure the connections : iscsiadm -m iface -I em1 --op=new # 1st ethernet interface iscsiadm -m iface -I p3p1 --op=new # 2d ethernet interface iscsiadm -m discovery -t sendtargets -p xx.xx.xx.xx iscsiadm -m node -o show iscsiadm -m node --login after this, on the web IU we can connect our LUN with all path. Also, I don’t understand how to configure multipath in the web UI . By defaut the configuration is in failover : multipath -ll : 36000d3100457e4000000000000000005 dm-3 COMPELNT,Compellent Vol size=500G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=1 status=active |- 23:0:0:1 sdb 8:16 active ready running |- 24:0:0:1 sdd 8:48 active ready running |- 25:0:0:1 sdc 8:32 active ready running |- 26:0:0:1 sde 8:64 active ready running |- 31:0:0:1 sdf 8:80 active ready running |- 32:0:0:1 sdg 8:96 active ready running |- 33:0:0:1 sdh 8:112 active ready running |- 34:0:0:1 sdi 8:128 active ready running I think round robind or another configuration will be more performent. So can we made this configuration , select physical interface and configure multipath in web UI ? for easyly maintenance and adding other server ? Thank you. Sylvain.

3 4

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 09 Apr '20

09 Apr '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh for testing, as of April 9th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tool, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

2 1

access to QEMU monitor
by Matthias Leopold 09 Apr '20

09 Apr '20

Hi, for educational purposes I'm trying to access the QEMU monitor of oVirt VMs. Can someone tell me how this can be done? Connecting to the unix socket with socat doesn't work, probably because it's not started with "server,nowait". Can the QEMU monitor be reached with the SPICE console? thx Matthias

1 0

UI lockup
by Shareef Jalloq 08 Apr '20

08 Apr '20

Hi, when browsing to the admin portal of the Engine, I get a popup: Uncaught exception occurred. Please try reloading the page. Details: (NS_ERROR_STORAGE_BUSY). And the ui.log has the error at the end of the mail. What gives? Shareef. 2020-04-07 15:54:12,255Z ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-66) [] Permutation name: 1AD871380C0F85A90CBF764A6CF6663F 2020-04-07 15:54:12,255Z ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-66) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (NS_ERROR_STORAGE_BUSY) : at Unknown.loadFromLocalStorage( https://ovirt-engine.phoelex.com/ovirt-engine/webadmin/theme/00-ovirt.brand… ) at Unknown.init( https://ovirt-engine.phoelex.com/ovirt-engine/webadmin/theme/00-ovirt.brand… ) at Unknown.fn.setupVerticalNavigation( https://ovirt-engine.phoelex.com/ovirt-engine/webadmin/theme/00-ovirt.brand… ) at org.ovirt.engine.ui.webadmin.section.main.view.MainSectionView$lambda$0$Type.execute(MainSectionView.java:48) at com.google.gwt.core.client.impl.SchedulerImpl.runScheduledTasks(SchedulerImpl.java:167) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl.$flushPostEventPumpCommands(SchedulerImpl.java:338) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl$Flusher.execute(SchedulerImpl.java:76) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.SchedulerImpl.execute(SchedulerImpl.java:140) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:275) [gwt-servlet.jar:] at Unknown.Tu/<( https://ovirt-engine.phoelex.com/ovirt-engine/webadmin/?locale=en_US line 9 > scriptElement) at Unknown.d( https://ovirt-engine.phoelex.com/ovirt-engine/webadmin/?locale=en_US line 9 > scriptElement) at Unknown.anonymous(Unknown)

2 2

Cluster Console Encryption
by Tommaso - Shellrent 08 Apr '20

08 Apr '20

Hi to all. We are tryng to manage the value of "Enable VNC Encryption" on the cluster via ansible[or any automatic mode]. Someone got any hint? Regards -- -- Shellrent - Il primo hosting italiano Security First *Tommaso De Marchi* /COO - Chief Operating Officer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155> | Fax 04441492177

1 0

Cannot upload image
by Green, Jacob Allen /C 07 Apr '20

07 Apr '20

Hello, I am in a precarious situation where I need to upload an image to the storage domain, I understand that normally you would achieve this via the upload button on the storage domain > Disks tab. However I currently do not have the ability to import the certificate. Is there a way from command line either on the RHV manager or otherwise to upload a qcow2 without using the image upload through the GUI? Thank you.

3 4

Gluster problems with new disk and device name change and overlap
by Gianluca Cecchi 07 Apr '20

07 Apr '20

Hi, I have configured a single host HCI environment through the GUI wizard in 4.3.9. Initial setup has thai layout of disks, as seen by the operating system: /dev/sda -> for ovirt-node-ng OS /dev/nvme0n1 --> for gluster, engine and data volumes /dev/nvme1n1 --> for gluster, vmstore volume So far so good and all is ok. I notice that, even with single path internal disks, at the end oVirt configures the gluster disks as multipath devices and LVM2 PV structure on top of the multipath devices. Is this for "code optimization" at low level or what is the rationale for that, as with Gluster normally you do use local disks and so single path? Multipath structure generated: [root@ovirt ~]# multipath -l nvme.8086-50484b53373530353031325233373541474e-494e54454c205353 dm-5 NVME,INTEL SSDPED1K375GA size=349G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 0:0:1:0 nvme0n1 259:0 active undef running eui.01000000010000005cd2e4b5e7db4d51 dm-6 NVME,INTEL SSDPEDKX040T7 size=932G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 2:0:1:0 nvme1n1 259:2 active undef running [root@ovirt ~]# Anyway, on top of the multipah devices On /dev/nvme0n1: gluster_vg_nvme0n1 volume group with gluster_lv_data and gluster_lv_engine On /dev/nvme1n1 gluster_vg_nvme1n1 volume group with gluster_lv_vmstore logical volume The problem arises when I add another nvme disk, that, occupying a PCI slot, it seems has always higher priority of the previous /dev/nvme1n1 disk and so takes its name. After booting the node: old nvme0n1 --> unmodified name old nvme1n1 --> becomes nvme2n1 new disk --> gets name nvme1n1 From a funcional point of view I have no problems apart LVM warnings I send below and also because the xfs entries in fstab are with UUID: UUID=fa5dd3cb-aeef-470e-b982-432ac896d87a /gluster_bricks/engine xfs inode64,noatime,nodiratime 0 0 UUID=43bed7de-66b1-491d-8055-5b4ef9b0482f /gluster_bricks/data xfs inode64,noatime,nodiratime 0 0 UUID=b81a491c-0a4c-4c11-89d8-9db7fe82888e /gluster_bricks/vmstore xfs inode64,noatime,nodiratime 0 0 lvs commands get: [root@ovirt ~]# lvs WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. LV VG Attr LSize Pool Origin ... Or, for the old nvme1n1 disk, now nvme2n1 multipath device: [root@ovirt ~]# pvdisplay /dev/mapper/eui.01000000010000005cd2e4e359284f51 WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. --- Physical volume --- PV Name /dev/mapper/eui.01000000010000005cd2e4e359284f51 VG Name gluster_vg_nvme1n1 PV Size 931.51 GiB / not usable 1.71 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 238467 Free PE 0 Allocated PE 238467 PV UUID O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl [root@ovirt ~]# I'm able to create PV on top of the new multipath device detected by the system (see the nvme1n1 of the underlying disk): eui.01000000010000005cd2e4b5e7db4d51 dm-6 NVME,INTEL SSDPEDKX040T7 size=3.6T features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 1:0:1:0 nvme1n1 259:1 active undef running [root@ovirt ~]# pvcreate --dataalignment 256K /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. Physical volume "/dev/mapper/eui.01000000010000005cd2e4b5e7db4d51" successfully created. [root@ovirt ~]# But then I'm unable to create a VG on top of it: [root@ovirt ~]# vgcreate gluster_vg_4t /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme1n1 for PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9 prefers device /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 because device is in dm subsystem. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme1n1 for PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because of previous preference. WARNING: PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9 prefers device /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 because of previous preference. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because of previous preference. Cannot use device /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 with duplicates. [root@ovirt ~]# the same with the "-f" option. I suspect I can solve the problem filtering out /dev/nvme* devices in lvm.conf, but I'm not sure. The OS disk is seen as sda so it should not have problems with this Something like this: filter = [ "r|/dev/nvme|", "a|.*/|" ] And also I am not sure if I have to rebuild the initrd or not in this case and if so what would be the exact sequence of commands to execute. Any suggestions? Thanks in advance, Gianluca

2 2

Auto-logout while editing
by Shareef Jalloq 07 Apr '20

07 Apr '20

There's a rather annoying bug in the Engine UI where you can be logged out while actively using the system. I've been logged out twice now while editing the settings for a new VM. I'm screen grabbing and documenting as I go but I was just logged out while editing the System settings for a new VM. Shareef.

2 1

snapshot options on remote NFS storage
by Jayme 07 Apr '20

07 Apr '20

Was wondering if there are any guides or if anyone could share their storage configuration details for NFS. If using LVM is it safe to snapshot volumes with running VM images for backup purposes?

2 1

Re: Mount ISO to VM
by Shani Leviim 07 Apr '20

07 Apr '20

Hi Anton, Sure thing. During the creation of the NFS storage, you should specify an export path. SSHing that export path will expose you to the storage domain's content. You can visit the "Attaching NFS Storage" section in https://ovirt.org/documentation/admin-guide/chap-Storage.html *Regards,* *Shani Leviim* On Tue, Apr 7, 2020 at 1:37 PM Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > Hi Shani, > > > > Great, thank you very much. > > > > Do you perhaps know if I can access the storage domain if I SSH to a node? > For instance, if I want to access a “datastore” in VMware, I SSH to a host > and select /vmfs/volumes > > > > Is there anything like that available for oVirt? > > > > Thanks > > > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > [image: F] <https://www.facebook.com/voxtelecomZA> > [image: T] <https://www.twitter.com/voxtelecom> > [image: I] <https://www.instagram.com/voxtelecomza/> > [image: L] <https://www.linkedin.com/company/voxtelecom> > [image: Y] <https://www.youtube.com/user/VoxTelecom> > > *From:* Shani Leviim <sleviim(a)redhat.com> > *Sent:* 07 April 2020 11:35 > *To:* Anton Louw <Anton.Louw(a)voxtelecom.co.za> > *Cc:* users(a)ovirt.org > *Subject:* Re: [ovirt-users] Mount ISO to VM > > > > Hi Anton, > > You can upload an ISO file as a disk using the UI: > > Storage -> Disks -> upload. > > Further information can be found here under the "Uploading a Disk Image to > a Storage Domain" section: > > https://www.ovirt.org/documentation/admin-guide/chap-Virtual_Machine_Disks.… > > > > Or use the following script using SDK: > https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… > > > *Regards,* > > *Shani Leviim* > > > > > > On Tue, Apr 7, 2020 at 11:45 AM Anton Louw <Anton.Louw(a)voxtelecom.co.za> > wrote: > > > > Hi Everybody, > > > > Is there a way to mount an ISO to one of my VMs if I do not have an ISO > domain, but the ISO file is on a Data domain? > > > > Thanks > > > > *Anton Louw* > > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > > *Disclaimer* <https://www.facebook.com/voxtelecomZA> > > The contents of this email are confidential to the sender and the intended > recipient. Unless the contents are clearly and entirely of a personal > nature, they are subject to copyright in favour of the holding company of > the Vox group of companies. Any recipient who receives this email in error > should immediately report the error to the sender and permanently delete > this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as a > Service (SaaS) for business. Providing a *safer* and *more useful* place > for your human generated data. Specializing in; Security, archiving and > compliance. To find out more *Click Here*. > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > _______________________________________________ > Users mailing list -- *users(a)ovirt.org* > To unsubscribe send an email to *users-leave(a)ovirt.org* > Privacy Statement: *https://www.ovirt.org/privacy-policy.html* > oVirt Code of Conduct: > *https://www.ovirt.org/community/about/community-guidelines/* > List Archives: > *https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7ONE6IJN6RK2IQRNUYCZE3EOXBJWHX4/* > <https://www.facebook.com/voxtelecomZA> > > >

1 0

Re: Mount ISO to VM
by Shani Leviim 07 Apr '20

07 Apr '20

Hi Anton, You can upload an ISO file as a disk using the UI: Storage -> Disks -> upload. Further information can be found here under the "Uploading a Disk Image to a Storage Domain" section: https://www.ovirt.org/documentation/admin-guide/chap-Virtual_Machine_Disks.… Or use the following script using SDK: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… *Regards,* *Shani Leviim* On Tue, Apr 7, 2020 at 11:45 AM Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > Hi Everybody, > > > > Is there a way to mount an ISO to one of my VMs if I do not have an ISO > domain, but the ISO file is on a Data domain? > > > > Thanks > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > [image: F] <https://www.facebook.com/voxtelecomZA> > [image: T] <https://www.twitter.com/voxtelecom> > [image: I] <https://www.instagram.com/voxtelecomza/> > [image: L] <https://www.linkedin.com/company/voxtelecom> > [image: Y] <https://www.youtube.com/user/VoxTelecom> > > [image: #VoxBrand] > <https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME> > *Disclaimer* > > The contents of this email are confidential to the sender and the intended > recipient. Unless the contents are clearly and entirely of a personal > nature, they are subject to copyright in favour of the holding company of > the Vox group of companies. Any recipient who receives this email in error > should immediately report the error to the sender and permanently delete > this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as a > Service (SaaS) for business. Providing a *safer* and *more useful* place > for your human generated data. Specializing in; Security, archiving and > compliance. To find out more Click Here > <https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>. > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7ONE6IJN6RK2… >

2 1

ISO and Export domains deprecated
by Colin Coe 07 Apr '20

07 Apr '20

Hi all I'm trying to understand how ISO and Export domains going away is going to affect us. We have four RHV instances: - Prod DC1 (RHV4.1) - Prod DC2 (RHV4.1) - DEV (RHV4.3) - TEST (RHV4.3) Prod DC1, DEV and TEST all share export and ISO domains. Prod DC2 is remote and currently has its own ISO and Export domains. When ISO and Export domains go away, can I still share ISO domains between the RHV instances? Thanks

5 9

Mount ISO to VM
by Anton Louw 07 Apr '20

07 Apr '20

Hi Everybody, Is there a way to mount an ISO to one of my VMs if I do not have an ISO domain, but the ISO file is on a Data domain? Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 07 Apr '20

07 Apr '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh for testing, as of April 3rd, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tools, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 5

Add gluster storage domain incomplete documentation
by Gianluca Cecchi 07 Apr '20

07 Apr '20

Hello, I think both at oVirt and Red Hat official docs the steps regarding adding a new Gluster storage domain on an existing installation is quite confusing and misaligned. Below I explain my reasons for both. In the mean time, suppose I have a single host HCI with self hosted engine (but it could be useful to have hints for multi-hosts too) and the 3 storage domains configured during install (engine and data on a disk and vmstore on another disk). The system initially had 3 disks, the first used for the ovirt-node-ng system, the second for engine and data, the third for vmstore initial gluster storage domains Now I go and add a fourth disk, say 4Tb in size. I would like to create a new Gluster storage domain on it What are the suggested steps? BTW: after booting, the new disk has been automatically included in multipath eui.01000000010000005cd2e4b5e7db4d51 dm-6 NVME,INTEL SSDPEDKX040T7 size=3.6T features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 1:0:1:0 nvme1n1 259:1 active undef running Coming back to the docs - oVirt documentation I base my considerations on page https://www.ovirt.org/documentation/admin-guide/chap-Working_with_Gluster_S… 1) the picture in that page is still based on 3.6 GUI, so the initial approach tends to make me feel the page could be not up to date 2) I would put the section "Creating a Storage Volume" before "Attaching a Gluster Storage Volume as a Storage Domain" and not the opposite as it is now 3) In "Creating a Storage Volume" there is the note that " You must create brick directories or mountpoints before you can add them to volumes. " This sentence in my opinion is not so clear (see also details at the end)... what is a user expected to have done on hypervisors? Creation of directories or file systems (and what type: prefered xfs or ext4?). Perhaps an example of commands would be useful. 4) in the workflow of creating volume, item 7: Click the Add Bricks button to select bricks to add to the volume. Bricks must be created externally on the Gluster Storage nodes. I would expect an indication of commands to be run instead... This implies knowledge of Gluster that the GUI functionality is aimed to hide... but so, not completely... I can see in my existing bricks, going to their advanced details: " xfs rw,seclabel,noatime,nodiratime,attr2,inode64,logbsize=128k,sunit=256,swidth=512,noquota " There is also the fstab portion of creating bricks... 5) In the workflow of creating volume, item 9: It is not clear the default "*" value for access if is the recommended one or not. I presume not - RHV documentation https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/ht… 4.3 Administrator Guide downloaded today Chapter 8, section 8.6 PREPARING AND ADDING RED HAT GLUSTER STORAGE There is reference to Red Hat Gluster Storage, version 3.4. I think it should be 3.5 instead? Because at the same time in 3.4 there is reference to RHV 4.1, not 4.3. While in "Configuring Red Hat Virtualization with Red Hat Gluster Storage" version 3.5 there is correct reference to RHV 4.3 Anyway this mix of product documentation is not optimal in my opinion. I would directly include inside RHV docs the Gluster part related to it, without jumping between the two comlete, with the risk of misalignment in time. Also, in Gluster Storage guide referred, there is the part related to volumes but not to bricks.... Possibly the correct reference for the brick part, that is the one missing in webadmin GUI, could be this: https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.5/h… and/or this https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.5/h… ? Thanks for reading and hoping to get commands' workflow to configure this new disk for a new gluster storage domain. It seems inside the guides is oversimplified the process of creating bricks, that in the documentation seem actually to be xfs filesystems mounted over thin pool based logical volumes residing on top of volume groups with particular alignment settings specified during their creation.... Gianluca

2 3

Engine/host communication maybe broken
by Sven Achtelik 06 Apr '20

06 Apr '20

Hi All, I'm currently facing a situation which I don't know how to resolve and I don't know how that happened. The hosted engine HA part is working fine and the vm starts. It's accessible via the gui and that's it. It's showing some hosts online and some offline. It looks like it's not communication with the nodes anymore to get the latest status or to start task. Is there a cache or something that can be cleared on the engine vm to force a connection the the nodes ? Or is there a way to analyze if communication is really broken ? Any ideas how to start from here ? Thank you, Sven

3 3

"Actual timezone differs [...]" after using the new virtio-win guest tools
by Tobias Scheinert 06 Apr '20

06 Apr '20

Hi, we are currently preparing our Windows software packages for update oVirt from version 4.3 to version 4.4. One of the novelties[1] of version 4.4 is the change from the ovirt-guest-tools to the virtio-win guest tools. We are currently running version 4.3.9.4-1.el7 in our oVirt cluster. When we are installing the new virtio-win guest tools we get the tooltip message: "Actual timezone in the guest differs from the configuration". The guest agents of the two guest tools are completely different, the ovirt-guest-agent is written in Python, the qemu-guest-agent is written in C. So my guess was, that there would different result send to the ovirt-engine. As I looked into the sources of ovirt-engine, especially into the timezone Java stuff, I did not found any changes in the last few months. So is this bug fixed, with the new ovirt version 4.4, or is this aspect new? P.S. The os in the vm was Windows 10 version 1909 [1] <https://ovirt.org/release/4.4.0/> Best Regards Tobias Scheinert

2 3

Windows Guest Agent Issues Since 4.3
by Alex McWhirter 06 Apr '20

06 Apr '20

Upgraded a installation to 4.3, and update the guest agent on all VM's, now all of my Windows VM's have a exclamation point telling me to install the latest guest agent. Some parts of the guest agent still seem to work, the IP addresses are still showing in the portal, but not FQDN and for some machine the shutdown button no longer functions correctly. I also tried to a fresh 4.3 install on a test cluster, and at first it worked great. But after a few days all of the windows vm's on that setup are showing the same behavior. Linux guests are fine on both systems. Not really sure where to start looking.

1 0

oVirt 4.4.0 Beta release is now available for testing
by Sandro Bonazzola 06 Apr '20

06 Apr '20

oVirt 4.4.0 Beta release is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 for testing, as of March 27th, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 which are currently included in Red Hat Enterprise Linux 8.2 beta. If you want to have a better experience you can test oVirt 4.4.0 Beta on Red Hat Enterprise Linux 8.2 beta. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains. You can still copy iso images into the deprecated ISO domain for installing VMs. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 or newer * CentOS Linux (or similar) 8.1 or newer * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

4 5