- Users - oVirt List Archives

Re: Changing the Data Warehouse Sampling Scale
by Yedidyah Bar David 05 Mar '20

05 Mar '20

On Wed, Mar 4, 2020 at 7:09 PM Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > > Hello Anton, > you can also manually do this > edit /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-scale.conf > run systemctl restart ovirt-engine-dwhd.service > > if you upgrade your engine it puts the old 10-setup-scale.conf back but it keeps a copy You can also add your own copy of this file with a later name (say "99-my-stuff.conf"). This will take precedence and won't be touched by upgrades. However: > > > Regards, > Paul S. > ________________________________ > From: anton.louw(a)voxtelecom.co.za <anton.louw(a)voxtelecom.co.za> > Sent: 04 March 2020 05:37 > To: users(a)ovirt.org <users(a)ovirt.org> > Subject: [ovirt-users] Changing the Data Warehouse Sampling Scale > > Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. > > Hi Everybody, > > I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. If it's completely empty, perhaps there is some other problem, not the scale. To further debug this, check that both the engine and dwh access the same database (this should be ok by default, but perhaps you used non-defaults) by checking the credentials they use in their conf files: grep DWH_DB /etc/ovirt-engine/engine.conf.d/*conf grep DWH_DB /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/*conf You might also check /var/log/ovirt-engine-dwh/ovirt-engine-dwhd.log . Best regards, > Is this just as simple as described in the following article: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > > Are there any precautions I should take, and has anybody else ever done this before? > > Thanks a lot > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > oVirt Code of Conduct: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > List Archives: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FQBQ4ISS5BTVH… -- Didi

2 1

Re: Changing the Data Warehouse Sampling Scale
by Anton Louw 05 Mar '20

05 Mar '20

Hi Paul, That is great news! Thanks so much for the reply. Cheers Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> Sent: 04 March 2020 18:35 To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org Subject: Re: [ovirt-users] Changing the Data Warehouse Sampling Scale Hello Anton, you can also manually do this edit /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-scale.conf run systemctl restart ovirt-engine-dwhd.service if you upgrade your engine it puts the old 10-setup-scale.conf back but it keeps a copy Regards, Paul S. ________________________________ From: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> <anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>> Sent: 04 March 2020 05:37 To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] Changing the Data Warehouse Sampling Scale Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Everybody, I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. Is this just as simple as described in the following article: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> Are there any precautions I should take, and has anybody else ever done this before? Thanks a lot _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> oVirt Code of Conduct: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> List Archives: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>

1 0

Re: subnets
by Dominik Holler 05 Mar '20

05 Mar '20

On Tue, Mar 3, 2020 at 1:48 PM <eevans(a)digitaldatatechs.com> wrote: > Uncheck passthrough and make sure the vnic is part of a legitimate network. > > > Does this mean that there are still problems to schedule the VM? If so, please share the relevant lines of engine.log. > Eric Evans > > Digital Data Services LLC. > > 304.660.9080 > > > > *From:* Dominik Holler <dholler(a)redhat.com> > *Sent:* Tuesday, March 03, 2020 6:03 AM > *To:* eevans(a)digitaldatatechs.com > *Cc:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: subnets > > > > > > > > On Sat, Feb 29, 2020 at 9:03 PM <eevans(a)digitaldatatechs.com> wrote: > > When I attach a vnic to a vm and try to start it I get the following > message: > > > > - Cannot run VM. There is no host that satisfies current scheduling > constraints. See below for details: > - The host kvm04 did not satisfy internal filter Network because there > are no free virtual functions which are suitable for virtual nic(s) nic3. A > virtual function is considered as suitable if the VF's configuration of its > physical function contains the virtual nic's network/network label. > - The host kvm02 did not satisfy internal filter Network because there > are no free virtual functions which are suitable for virtual nic(s) nic3. A > virtual function is considered as suitable if the VF's configuration of its > physical function contains the virtual nic's network/network label. > - The host kvm01 did not satisfy internal filter > VmToHostsAffinityGroups because it did not match positive affinity rules . > > I am new to ovirt and never had an issue with kvm hypervisor. > > > > Can you please ensure that the checkbox Passthrough of the vNIC profile is > not actived? > > > https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks.html#… > > > > > > > > Eric Evans > > Digital Data Services LLC. > > 304.660.9080 > > > > *From:* Alex K <rightkicktech(a)gmail.com> > *Sent:* Saturday, February 29, 2020 2:48 PM > *To:* eevans(a)digitaldatatechs.com > *Cc:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: subnets > > > > > > On Sat, Feb 29, 2020, 18:38 <eevans(a)digitaldatatechs.com> wrote: > > I have a network in place with several subnets, one for iscsi and one for > virtual pbx and VoIP phones. I use the iscsi in Ovirt, but I cannot get > Ovirt to recognize and use the physical vlan 3 network for phones. If I add > it and the subnet, Ovirt will make give it an IP, but it's an isolated > network with no connectivity to the other vm's or the Internet. > > You will need to attach a vm to a network in order the vm to have access > to the specific network. This should be straightforward from web gui. > > I have read several topics on this but I can't get it to work properly. > Any help would be appreciated. > Thanks. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/CYXBJM43M6TR6… > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/JNBUBZ3UY4URQ… > > > >

3 2

Changing the Data Warehouse Sampling Scale
by anton.louw＠voxtelecom.co.za 04 Mar '20

04 Mar '20

Hi Everybody, I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. Is this just as simple as described in the following article: https://www.ovirt.org/documentation/data-warehouse/Changing_the_Data_Wareho… Are there any precautions I should take, and has anybody else ever done this before? Thanks a lot

2 1

Error when exporting virtual machine
by Suporte LENEP 04 Mar '20

04 Mar '20

Hello everyone, I am getting the following error when I try to export a virtual machine: 2020-02-04 10:43:44,818-02 ERROR [org.ovirt.engine.core.bll.exportimport.GetVmsFromExportDomainQuery] (default task-94) [1dc343fb-7d47-495d-898c-99f52a686307] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to GetVmsInfoVDS, error = Storage domain does not exist: (u'5ac6c35d-0406-4a06-a682-ed8fb2d1933f',), code = 358 (Failed with error StorageDomainDoesNotExist and code 358) Any ideas? -- Suporte LENEP

1 1

OVA import fails always
by Juan Pablo Lorier 02 Mar '20

02 Mar '20

Hi, I'm running 4.3.8.2-1.el7 (just updated engine to see if it helps) and I haven't been able to import vms in OVA format, I've tried many appliances downloaded from the web but couldn't get them to work. Any hints? Regards

5 6

Different cpu flags preventing live migration
by Gianluca Cecchi 02 Mar '20

02 Mar '20

Hello, I would like to share some problems that I'm finding on an environment based on RHV, but could impact also oVirt based environments. For my problems I'm working on an opened case to understand root cause. I have Dell R730 hypervisors (with Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz cpu) and some VMs configured for "customized" high performance. In the sense that I configure VM as high performance type and then: - I enable the graphical console (I remove the flag of headless Mode" in Console section); - In Host section I set for "Start Running On" Any Host in Cluster and allow manual and automating migration; - I also set HA in high availability section, accepting default values for leasing, resume behaviour, ecc.. These settings however have the effect to leave enable the flag related to "Pass-Through Host CPU" in Host section. I noticed that with same Bios, ecc with kernel in 4.3.8 (that seems equal between oVirt and RHV): [g.cecchi@ov200 ~]$ uname -r 3.10.0-1062.12.1.el7.x86_64 [g.cecchi@ov200 ~]$ I have this cpu flag set: invpcid_single Instead on the same host in 4.3.5 (eg kernel 3.10.0-1062.el7.x86_64) the flag is not set. This creates problem during upgrade from 4.3.5 to 4.3.8 because initially I empty one host and update it, but then I cannot live migrate back the VMs to update the other one, due to the pass-through flag set, that requires exact set of flags. So crosscheck on a test environment in case you have the "Pass-Through Host CPU" set in Host section for any critical VM you cannot shutdown. BTW: the flag is somehow tricky to remove if you set the VM as High Performance type; you have to: edit VM --> Host Start Running On --> change to select a specific host among the available ones Now you can remove the "Pass-Through Host CPU" flag --> remove it Start Running On --> change again to "Any Host in Cluster" Save Now you can live migrate this "customized" High Performance VM But the problem is that if the VM is running, you have to shutdown it to get the change in effect. HH, Gianluca

3 3

Re: Hyperconverged setup questions
by Strahil 29 Feb '20

29 Feb '20

Hi Marko, I guess you can use distributed-replicated volumes and oVirt cluster with host triplets. Best Regards, Strahil NikolovOn Oct 10, 2019 15:30, "Vrgotic, Marko" <M.Vrgotic(a)activevideo.com> wrote: > > Dear oVirt, > > > > Is it possible to add oVirt 3Hosts/Gluster hyperconverged cluster to existing oVirt setup? I need this to achieve Local storage performance, but still have pool of Hypevisors available. > > Is it possible to have more than 3Hosts in Hyperconverged setup? > > > > I have currently 1Shared Cluster (NFS based storage, where also SHE is hosted) and 2Local Storage clusters. > > > > oVirt current version running is 4.3.4. > > > > Kindly awaiting your reply. > > > > > > — — — > Met vriendelijke groet / Kind regards, > > Marko Vrgotic > > ActiveVideo > > > >

6 12

1-Host home setup question
by Christian Reiss 28 Feb '20

28 Feb '20

Hey folks, for a home-vm setup (1 host): If I setup the Hardware with CentOS7, configure Gluster et all by hand and get things up and running this way: Would it be a viable option to install the ovirt engine directly on the host as well? This would save some overhead. Or is running ovirt engine directly inside an ovirt host, even using CentOS (not the node) not recommended and will break things? -- with kind regards, mit freundlichen Gruessen, Christian Reiss

2 2

Re: ldaps-config
by Budur Nagaraju 28 Feb '20

28 Feb '20

can some one help me on the issue ? badly stuck on this have not got any pointer on fix . An error occurred while attempting to query DNS in order to retrieve SRV records with name '_ldaps._tcp.abc.net <http://tcp.psecure.net>': NameNotFoundException(DNS name not found [response code 3]), ldapSDKVersion=4.0.7, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 Thanks, Nagaraju On Thu, Feb 27, 2020 at 8:48 PM Budur Nagaraju <nbudoor(a)gmail.com> wrote: > Hi Lucie, > > Can you please help me on this issue? am using ldaps for the configuration. > > Thanks, > Nagaraju > > > On Thu, Feb 27, 2020 at 4:00 PM Budur Nagaraju <nbudoor(a)gmail.com> wrote: > >> Hi Lucie, >> >> Have tried the option but when trying to logon from the browser getting >> the below error. >> Any tweaks can be made ? >> >> >> An error occurred while attempting to query DNS in order to retrieve SRV >> records with name '_ldaps._tcp.psecure.net': NameNotFoundException(DNS >> name not found [response code 3]), ldapSDKVersion=4.0.7, >> revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 >> >> Thanks, >> Nagaraju >> >> >> >> On Thu, Feb 27, 2020 at 3:51 PM Lucie Leistnerova <lleistne(a)redhat.com> >> wrote: >> >>> Hi Budur, >>> >>> or just use the tool for it - Configuring an External LDAP Provider >>> https://www.ovirt.org/documentation/admin-guide/chap-Users_and_Roles.html >>> >>> Best regards, >>> >>> Lucie >>> On 2/27/20 9:32 AM, Eduardo Mayoral wrote: >>> >>> Should be as simple as this: >>> >>> >>> [root@ovirt-hc0 ~]# cat /etc/ovirt-engine/aaa/*activedirectory* >>> .properties >>> include = <ad.properties> >>> >>> vars.domain = XXXXXX >>> vars.user = YYYYYYYYYYY >>> vars.password = ZZZZZZZZZ >>> >>> *pool.default.ssl.startTLS = true* >>> *pool.default.ssl.startTLSProtocol = TLSv1.2* >>> >>> pool.default.auth.simple.bindDN = ${global:vars.user} >>> pool.default.auth.simple.password = ${global:vars.password} >>> pool.default.serverset.type = srvrecord >>> pool.default.serverset.srvrecord.domain = ${global:vars.domain} >>> >>> >>> >>> Just remember to trust the certificate authority for the ldaps >>> certificate in the ovirt engine server. >>> >>> >>> https://stackoverflow.com/questions/37043442/how-to-add-certificate-authori… >>> >>> >>> On 27/2/20 4:42, Budur Nagaraju wrote: >>> >>> Hi >>> >>> Can someone help me in configuring ldaps in oVirt Engine 4.x ? >>> >>> Thanks, >>> Nagaraju >>> >>> >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/P6QHPSFZLOZ6E… >>> >>> -- >>> Eduardo Mayoral Jimeno >>> Systems engineer, platform department. Arsys Internet.emayoral(a)arsys.es - +34 941 620 105 - ext 2153 >>> >>> >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ADWCGNS353CUN… >>> >>> -- >>> Lucie Leistnerova >>> Senior Quality Engineer, QE Cloud, RHVM >>> Red Hat EMEA >>> >>> IRC: lleistne @ #rhev-qe >>> >>>

3 4

Info on python SDK variable definition
by Gianluca Cecchi 27 Feb '20

27 Feb '20

Hello, suppose in a .py using sdk I have my_var1 = 'prefix' then in the workflow I get at runtime another my_var2 that for example has the attribute my_var2.name that equals "suffix" Then I want to define a new variable my_var3 with value "prefix_suffix", where the string "suffix" is known only at runtime, how can I get it? my_var3 = ??? Can I use something similar to what I do when using the print function? print ("My storage domain is %s..." % sd.name) ? Thanks, Gianluca

2 1

oVirt Python SDK and monitor export as OVA task
by Gianluca Cecchi 27 Feb '20

27 Feb '20

Hello, sometimes I have environments (typically with Oracle RDBMS on virtual machines) where there is one boot disk and one (often big, such as 500Gb or more) data disk. The data disk has already its application backup (typically RMAN) and I want to complement it with a backup of only the boot disk of the operating system and VM configuration. I'm almost done completing a script using oVirt Python SDK and sharing for comments. I could be wrong, but I didn't find any ansible module to do this with Ansible playbooks: I can only save all the VM, that in my case wouldn't be necessary and instead time and storage wasting. The basic steps are: - make a snapshot of the target vm, composed only by the boot disk - clone the snapshot - export the clone as OVA - delete clone - delete snapshot There are some things to discuss about, probably when I will share the overall job (such as the name to give to the boot disk, if not using the bootable flag, the way to import the OVA in case of actual need, where you will have to comment out some fs entries related to missing disks, ecc.). The only thing missing is how to monitor the export to ova task that, as with Ansible, it completes almost immediately, while the export is actually altready running. I need to monitor it, so only at its real end I can run the last 2 steps of the above list of tasks. Can you give me any hint? Not found very much in guide or docs on the web. I'm currently using a sleep because my boot disk is about 20Gb in size and I know that in less than 2 minutes it normally completes. The export as ova is very similar to what found in the examples and they don't contain a monitor for it but only the connection.close() call: cloned_vm_service.export_to_path_on_host( host=types.Host(id=host.id), directory = export_as_ova_dir, filename = cloned_vm.name + '.ova' ) Thanks in advance, Gianluca

3 3

EqualLogic SAN controller switchover
by Chris Adams 27 Feb '20

27 Feb '20

How well does oVirt handle an EqualLogic SAN controller switchover event? IIRC that can result in a short iSCSI "pause" (can't remember how long it takes) - I'm not sure what oVirt's threshold before VMs (including the hosted engine) get paused for storage timeouts. I've got a small setup where the active SAN controller's battery has gone bad, so I need to switch to the other controller, and I'm trying to figure out the impact - do I need to shut all VMs (including the engine) down first, will they just briefly pause and then continue, etc. -- Chris Adams <cma(a)cmadams.net>

6 9

oVirt 4.3.8 ovn vms doesn't ping
by Gianluca Cecchi 27 Feb '20

27 Feb '20

Hello, I have an environment with oVirt 4.3.8. All seems ok from a configuration point of view, but if I use OVN based interfaces on two VMs, they are not able to ping, both if I put them on the same host and if I put on different hosts. At this point they are both running on the same host and their only vnic is on ovn172 network (defined as 192.168.172.0/24). I have this manager # ovn-nbctl show switch fc2fc4e8-ff71-4ec3-ba03-536a870cd483 (ovirt-ovn192-1e252228-ade7-47c8-acda-5209be358fcf) switch 87012fa6-ffaa-4fb0-bd91-b3eb7c0a2fc1 (ovirt-ovn193-d43a7928-0dc8-49d3-8755-5d766dff821a) port 8141047d-10c0-41f6-bedc-130552a115ef addresses: ["00:1a:4a:17:01:54 dynamic"] port 90559419-cb8e-45ae-ad61-6c16c4aff598 addresses: ["00:1a:4a:17:01:52 dynamic"] port b3db190f-086a-4c79-99a0-77f811f66c80 addresses: ["00:1a:4a:17:01:53 dynamic"] switch 9e77163a-c4e4-4abf-a554-0388e6b5e4ce (ovirt-ovn172-4ac7ba24-aad5-432d-b1d2-672eaeea7d63) port 3641cae4-18df-4fba-a2bd-7b0c60a87162 addresses: ["00:1a:4a:19:01:59 dynamic"] port aaddc425-3a38-49bf-bfc7-9eaeab82906e addresses: ["00:1a:4a:19:01:58 dynamic"] The two macs correspond to what I see for VMs in web admin gui and at os level of the two VMs. On the host where VMs are running I have: # ovs-vsctl show f1a41e9c-16fb-4aa2-a386-2f366ade4d3c Bridge br-int fail_mode: secure Port "ovn-b8872a-0" Interface "ovn-b8872a-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.34"} Port br-int Interface br-int type: internal Port "vnet0" Interface "vnet0" Port "ovn-1dce5b-0" Interface "ovn-1dce5b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.32"} Port "vnet1" Interface "vnet1" ovs_version: "2.11.0" So apparently I see the vnet0 and vnet1 ports associated with the two VMs How can I check more in depth the reason why they don't ping? Both VMs are CentOS 8.1 but I don't know if it is relevant. Thanks, Gianluca

2 3

oVirt 4.3.8 and almost unpredictable export as ova duration
by Gianluca Cecchi 27 Feb '20

27 Feb '20

Hello, on a test oVirt environment I have export as ova task that, based on same disk size (20Gb) it could last 35 seconds or 11 minutes.... During the long lasting test I see on host that almost all and only I/O (in the measure of 6-7 MB/s) is done by a [loop0] process that has ppid 2 and apparently (with "fuser" command on /dev/loop0 file) is uses by noone. Is it implicitly used by the "qemu-img convert " command of the export as ova? Why so great difference in elapsed time? The disk is the same of the same VM. The oVirt env has almost nothing running only 2 CentOS 8.1 VMs doing nothing. Same host used for export as ova in the two runs in a 20 minutes timeframe. As the path for OVA I'm temporarily using a connected export domain subdirectory, using directory='/rhev/data-center/mnt/10.4.192.69:_export_ovirt/dump' Donna if it can have a role in the problem... Thanks, Gianluca

1 0

Re: Windows deployment
by Dominik Holler 27 Feb '20

27 Feb '20

On Wed, Feb 26, 2020 at 11:45 PM <eevans(a)digitaldatatechs.com> wrote: > It is a Red Hat Virtio Ethernet Adapter. > > > Would a e1000 or rtl8139 work for your scenario? > Eric Evans > > Digital Data Services LLC. > > 304.660.9080 > > > > *From:* Dominik Holler <dholler(a)redhat.com> > *Sent:* Wednesday, February 26, 2020 11:55 AM > *To:* eevans(a)digitaldatatechs.com > *Cc:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: Windows deployment > > > > > > > > On Wed, Feb 26, 2020 at 4:45 PM <eevans(a)digitaldatatechs.com> wrote: > > I have a Windows Deployment server that works with Hyper-V. I am tryng to > see if it will bare metal provision to Ovirt. > > > > Do you want to provision Windows into an oVirt VM? > > > > I have the necessary drivers loaded > > > > I am not familiar with the Windows deployment server. > > Would you help me to understand which drivers are loaded to what? > > > > and initially it gets an IP and starts the installation. > > > > I understand that the windows installer is starting. Where does he get the > files from? > > > > When it comes to the screen starting setup, I get an IP error. I have > included a screenshot. > > > > Might this be related to network drivers? > > If Windows in an oVirt VM, what is the type of the virtual NIC? > > Maybe using the e1000 or rtl8139 as type of the virtual NIC helps until > the VirtIO drivers are ins > talled? > > > > Has anyone see this before? > > I also considered provisioning from Foreman but I would rather use what I > have instead of recreating the entire installation. > Any help would be appreciated. > > Here is a link to the actual error: > > ftp://ftp.digitaldatatechs.com/pub/Windows%20Provision.jpg > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BGGJTCK7PZKCU… > > > >

3 2

Re: Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version
by Florian Schmid 27 Feb '20

27 Feb '20

Hi, no, fortunately, the bug didn't came back. It looks like, that the engine needs its time to settle after changing the cluster compatibility version. After about 2 hours, the CPU load was as low as before. The time to load the VM UI takes a little bit more time, but I think this is also normal, because all VMs still have the orange triangle and need a reboot. Sorry for the false positive, but I was really afraid about the high load. BR Florian Von: "p staniforth" <P.Staniforth(a)leedsbeckett.ac.uk> An: "Florian Schmid" <fschmid(a)ubimet.com>, "users" <users(a)ovirt.org> Gesendet: Donnerstag, 6. Februar 2020 18:22:51 Betreff: Re: Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version Has this bug come back engine.log flooded with "Field 'foo' can not be updated when status is 'Up'" [ https://lists.ovirt.org/archives/list/users@ovirt.org/thread/MKFQRCKHRT6NJU… | https://lists.ovirt.org/archives/list/users@ovirt.org/thread/MKFQRCKHRT6NJU… ] Regards, Paul S. From: Florian Schmid <fschmid(a)ubimet.com> Sent: 06 February 2020 15:53 To: users <users(a)ovirt.org> Subject: [ovirt-users] Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi, I have upgraded yesterday one of our ovirt environments from 4.2.8 to 4.3.8. We have a hosted engine, 25 hosts and about 150 VMs running there. After upgrading the cluster compatibility version from 4.2 to 4.3, I have seen a huge increase of CPU load on the engine VM. The engine had 4 cores (16GB mem) and never had load issues, but after the upgrade, the system has a load of 6 and more. I have increased the CPUs to 8, because working in the UI was impossible. I have noticed, that the load always increase, when I load the VM UI tab, where now all VMs have the orange triangle with pending changes: Custom compatibility version The problem I have, is, that I can't reboot now all VMs, maybe in the next 3 or 4 weeks. Working now with the UI is quite problematic, because of the slowness. The engine VM was already rebooted, but didn't solve the problem. What logs do you need and is there a workaround available? I have some more oVirt environments to upgrade, all with even more VMs. BR Florian _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: [ https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… | https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… ] oVirt Code of Conduct: [ https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… | https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… ] List Archives: [ https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… | https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… ] To view the terms under which this email is distributed, please go to:- [ http://leedsbeckett.ac.uk/disclaimer/email/ | http://leedsbeckett.ac.uk/disclaimer/email/ ]

2 4

ldaps-config
by Budur Nagaraju 27 Feb '20

27 Feb '20

Hi Can someone help me in configuring ldaps in oVirt Engine 4.x ? Thanks, Nagaraju

3 2

oVirt Storage quota questions
by Vrgotic, Marko 27 Feb '20

27 Feb '20

Dear oVirt, My platform is running SHE oVirt version 4.3.8. Why is my StorageQuota consumption still showing “ 0 out of 3700” ? Did I forget something? [A screenshot of a cell phone Description automatically generated] I have setup storage quota “StorageQuota” for one of domains. It has 4400GB actual storage. * Quota is set to 3700GB. * Treshold for Quota is 85% and Grace is set to 110%. * Datacenter Quota is set to Enforced * The template image has been changed from Default to StorageQuota * I see that Vms created from Template are automatically assigned StorageQuota To present the following situation in screenshots: * Actual Quota: [A screenshot of a social media post Description automatically generated] * VMs (more than on the screenshot) which have the StorageQuota assigned: [A screenshot of a social media post Description automatically generated] * Templates which have the StorageQuota assigned [cid:image004.png@01D5ED57.6C02ACF0] Kindly awaiting your reply. Additionally – is there an easy&safe way to update all running VMs quota? ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

1 0

Need steps to downgrade engine from 4.4 to 4.3.
by Ritesh Chikatwar 26 Feb '20

26 Feb '20

Hello all.. Is there any steps to downgrade engine from 4.4 to 4.3 Any help will appreciate. Ritesh

2 1

Storage performance comparison (gluster vs FC)
by Rik Theys 26 Feb '20

26 Feb '20

Hi, We currently use oVirt on two hosts that connect to a shared storage using SAS. In oVirt this is a "FC" storage domain. Since the warrantly on the storage box is ending, we are looking at alternatives. One of the options would be to use gluster and use a "hyperconverged" setup where compute and gluster are on the same hosts. We would probably end up with 3 hosts and a "replica 3 arbiter 1" gluster volume. (Or is another volume type more recommended for this type of setup?) I was wondering what the expected performance would be of this type of setup compared to a shared storage over FC. I expect the I/O latency of gluster to be much higher than the latency for the SAS connected storage box? Has anybody compared these storage setups? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

1 0

oVirt 4.3.8 spice console not working after vm migration
by Gianluca Cecchi 26 Feb '20

26 Feb '20

Hello, I'm registering problems with spice console session that remains stuck and not working after vm migration. Tried with 7.6 and 8.1 based virtual machines. The client is an updated Fedora 31 system. Using lsof -Pp pid command I don't see any tcp sessione opened Making the same when session is connected before migration: remote-vi 8013 g.cecchi 21u IPv4 243582 0t0 TCP localhost.localdomain:35218->10.4.192.32:5902 (ESTABLISHED) remote-vi 8013 g.cecchi 22u IPv4 248960 0t0 TCP localhost.localdomain:35226->10.4.192.32:5902 (ESTABLISHED) remote-vi 8013 g.cecchi 23u IPv4 248961 0t0 TCP localhost.localdomain:35228->10.4.192.32:5902 (ESTABLISHED) remote-vi 8013 g.cecchi 24u IPv4 248962 0t0 TCP localhost.localdomain:35230->10.4.192.32:5902 (ESTABLISHED) Right after migration I see only the close wait of the previous but not a new one with the ip of the destination host: remote-vi 8013 g.cecchi 21u IPv4 243582 0t0 TCP localhost.localdomain:35218->10.4.192.32:5902 (CLOSE_WAIT) And after a few seconds none. Also, closing the blocked spice window doesn't work: it becomes gray with in the middle "Waiting for display 1..." and I have to "kill -9 the remote-viewer process. Strangely the reverse works. After force closing spice console and connecting to the remote and making migrate reverse, the spice console session keeps working... The hosts have same versions of components: OS Version: RHEL - 7 - 7.1908.0.el7.centos OS Description: CentOS Linux 7 (Core) Kernel Version: 3.10.0 - 1062.12.1.el7.x86_64 KVM Version: 2.12.0 - 33.1.el7_7.4 LIBVIRT Version: libvirt-4.5.0-23.el7_7.5 VDSM Version: vdsm-4.30.40-1.el7 SPICE Version: 0.14.0 - 7.el7 GlusterFS Version: [N/A] CEPH Version: librbd1-10.2.5-4.el7 Open vSwitch Version: openvswitch-2.11.0-4.el7 Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3 VNC Encryption: Disabled What else can I check? On Fedora I have virt-viewer-8.0-3.fc31.x86_64 Gianluca

1 0

Re: terraform integration
by Nathanaël Blanchet 26 Feb '20

26 Feb '20

2 1

Re: Damaged hard disk in volume replica gluster
by Strahil 25 Feb '20

25 Feb '20

As you are replacing an old brick, you have to recreate the old LV and mount it on the same location. Then you can use the gluster's "reset-brick" (i thing ovirt UI has that option too) and all data will be replicated there. You got also the "replace-brick" option if you decided to change the mount location. P.S.: with replica volumes your volume should be still working, in case it has stopped - you have to investigate before proceeding. Best Regards, Strahil NikolovOn Oct 12, 2019 13:12, matteo fedeli <matmilan97(a)gmail.com> wrote: > > Hi, I have in my ovirt HCI a volume that not work properly because one of three hdd fail. I bought a new hdd, I recreate old lvm partitioning and mount point. Now, how can I attach this empty new brick? > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/U5XQ4M2K5RBKL…

5 20

adding a second subnet external provider ovirt 4.38
by eevans＠digitaldatatechs.com 25 Feb '20

25 Feb '20

I'm a bit confused about adding a second network provider. If I understand it correctly, I have to add it on a host and then import it? Is that correct or am I miss reading it. Please enlighten me. Thanks.

1 0