- Users - oVirt List Archives

Re: iSCSI Domain Addition Fails
by Benny Zlotnik 23 Feb '20

23 Feb '20

anything in the vdsm or engine logs? On Sun, Feb 23, 2020 at 4:23 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > > Also, I did do the “Login” to connect to the target without issue, from what I can tell. > > > > From: Robert Webb > Sent: Sunday, February 23, 2020 9:06 AM > To: users(a)ovirt.org > Subject: iSCSI Domain Addition Fails > > > > So I am messing around with FreeNAS and iSCSI. FreeNAS has a target configured, it is discoverable in oVirt, but then I click “OK” nothing happens. > > > > I have a name for the domain defined and have expanded the advanced features, but cannot find it anything showing an error. > > > > oVirt 4.3.8 > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FMAXFDMNHVGTM…

1 0

Re: iSCSI Domain Addition Fails
by Robert Webb 23 Feb '20

23 Feb '20

Also, I did do the "Login" to connect to the target without issue, from what I can tell. From: Robert Webb Sent: Sunday, February 23, 2020 9:06 AM To: users(a)ovirt.org Subject: iSCSI Domain Addition Fails So I am messing around with FreeNAS and iSCSI. FreeNAS has a target configured, it is discoverable in oVirt, but then I click "OK" nothing happens. I have a name for the domain defined and have expanded the advanced features, but cannot find it anything showing an error. oVirt 4.3.8

1 0

iSCSI Domain Addition Fails
by Robert Webb 23 Feb '20

23 Feb '20

So I am messing around with FreeNAS and iSCSI. FreeNAS has a target configured, it is discoverable in oVirt, but then I click "OK" nothing happens. I have a name for the domain defined and have expanded the advanced features, but cannot find it anything showing an error. oVirt 4.3.8

1 0

dashboard data empty
by Fabrizio 23 Feb '20

23 Feb '20

Hello everyone. I intalled 4 node with hosted engine, everything works fine exept the dashboard. it doesn't collect any data and is always empty of information. searching around I found out that the problem could be the dwh service, inside the log there is an error: ## log file 2020-02-19 17:46:14|ETL Service Started ovirtEngineDbDriverClass|org.postgresql.Driver ovirtEngineHistoryDbJdbcConnection|jdbc:postgresql://localhost:5432/ovirt_engine_history?sslfactory=org.postgresql.ssl.NonValidatingFactory hoursToKeepDaily|0 hoursToKeepHourly|720 ovirtEngineDbPassword|********************** runDeleteTime|3 ovirtEngineDbJdbcConnection|jdbc:postgresql://localhost:5432/engine?sslfactory=org.postgresql.ssl.NonValidatingFactory runInterleave|60 limitRows|limit 1000 ovirtEngineHistoryDbUser|ovirt_engine_history ovirtEngineDbUser|engine deleteIncrement|10 timeBetweenErrorEvents|300000 hoursToKeepSamples|24 deleteMultiplier|1000 lastErrorSent|2011-07-03 12:46:47.000000 etlVersion|4.3.8 dwhAggregationDebug|false dwhUuid|5c4ffc1b-928f-4d06-a40f-bb34ba11c7f2 ovirtEngineHistoryDbDriverClass|org.postgresql.Driver ovirtEngineHistoryDbPassword|********************** Exception in component tJDBCInput_2 org.postgresql.util.PSQLException: Bad value for type short : 201905 at org.postgresql.jdbc2.AbstractJdbc2ResultSet.getShort(AbstractJdbc2ResultSet.java:2098) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.tJDBCInput_2Process(OsEnumUpdate.java:2354) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.tRowGenerator_1Process(OsEnumUpdate.java:1921) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.tJDBCInput_4Process(OsEnumUpdate.java:1376) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.tJDBCConnection_1Process(OsEnumUpdate.java:873) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.tJDBCConnection_2Process(OsEnumUpdate.java:736) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.runJobInTOS(OsEnumUpdate.java:4396) at ovirt_engine_dwh.osenumupdate_4_3.OsEnumUpdate.runJob(OsEnumUpdate.java:4099) at ovirt_engine_dwh.samplerunjobs_4_3.SampleRunJobs.tRunJob_4Process(SampleRunJobs.java:947) at ovirt_engine_dwh.samplerunjobs_4_3.SampleRunJobs.tJDBCConnection_2Process(SampleRunJobs.java:767) at ovirt_engine_dwh.samplerunjobs_4_3.SampleRunJobs.tJDBCConnection_1Process(SampleRunJobs.java:642) at ovirt_engine_dwh.samplerunjobs_4_3.SampleRunJobs$2.run(SampleRunJobs.java:2683) ## SERVICE STATUS ● ovirt-engine-dwhd.service - oVirt Engine Data Warehouse Loaded: loaded (/usr/lib/systemd/system/ovirt-engine-dwhd.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-02-19 17:46:14 CET; 16h ago Main PID: 6425 (ovirt-engine-dw) CGroup: /system.slice/ovirt-engine-dwhd.service ├─6425 /usr/bin/python /usr/share/ovirt-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.py --redirect-output --systemd=notify start └─6512 ovirt-engine-dwhd -Dorg.ovirt.engine.dwh.settings=/tmp/tmparNn_x/settings.properties -Xms1g -Xmx1g -classpath /usr/share/ovirt-engine-dwh/lib/*::/usr/share/java/dom4j.jar:/usr/share/java/apache-commons-collections.jar:/usr/share/java/postgresql-jdbc.jar ovirt_engine_dwh.historyetl_4_3.HistoryETL --context=Default Feb 19 17:46:14 engine.ovirt.local systemd[1]: Starting oVirt Engine Data Warehouse... Feb 19 17:46:14 engine.ovirt.local systemd[1]: Started oVirt Engine Data Warehouse.

4 4

metrics-store installation
by Christoph Köhler 23 Feb '20

23 Feb '20

Hello! I have installed metrics store along this documentation: https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_St… Everything went fine without errors, so I have now the login page in my browser. The Problem is that the credentials for login seems to be not taken over. The user should be 'admin' and the password is given at the beginning in secure_vars.yaml. Does anyone have an idea what to do now? Greetings! Chris

2 1

paused vm's will not resume
by eevans＠digitaldatatechs.com 23 Feb '20

23 Feb '20

I have 2 vm's, which are the most important in my world, that paused and will not resume. I have googled this to death but no solution. It stated a lack of space but none of the drives on my hosts are using more than 30% or there space and these 2 have ran on kvm host for several years and always had at least 50% free space. I like ovirt and want to use it but I cannot tolerate the down time. If I cannot get this resolved, I'm going back to kvm hosts. I am pulling my hair out here. If anyone can help with this issue, please let me know.

6 10

Hugepages and running out of memory
by klaasdemter＠gmail.com 22 Feb '20

22 Feb '20

Hi, this e-mail is meant to caution people using hugepages and mixing those VMs with non-hugepages VMs on the same hypervisors. I ran into major trouble, the hypervisors ran out of memory because the VM scheduling disregards the hugepages in it's calculations. So if you have hugepages and non-hugepages VMs better check the memory commited on a hypervisor manually :) https://bugzilla.redhat.com/show_bug.cgi?id=1804037 https://bugzilla.redhat.com/show_bug.cgi?id=1804046 As for workarounds: so far it seems the only viable solution is splitting hugepages/nonhugepages VMs with affinity groups but at least for me that means wasting a lot of resources. Greetings Klaas

1 0

main channel: failed to connect HTTP proxy connection not allowed
by Jorick Astrego 21 Feb '20

21 Feb '20

Hi, Having a spice console issue on our new 4.3.8 cluster. The console stays blank and with the cli and debug on, I get the following error "main channel: failed to connect HTTP proxy connection not allowed" We have a userportal through haproxy so this is configured in ovirt engine engine-config -g SpiceProxyDefault SpiceProxyDefault: http://userportal.*.*:****/ version: general But the same setting works fine on our 4.2 cluster. I can telnet to the ports on the 4.3.8 hosts without issue. Non working console on newer cluster: remote-viewer -v --debug console.vv (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.697: Opening display to console.vv (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.700: Guest (null) has a spice display Guest (null) has a spice display (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.789: Spice foreign menu updated (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: After open connection callback fd=-1 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: Opening connection to display at console.vv Opening connection to display at console.vv (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: fullscreen display 0: 0 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: app is not in full screen (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.792: New spice channel 0x55704bf70d40 SpiceMainChannel 0 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.793: notebook show status 0x55704b820280 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: main channel: failed to connect HTTP proxy connection not allowed (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: Destroy SPICE channel SpiceMainChannel 0 (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: zap main channel (remote-viewer:29267): virt-viewer-WARNING **: 16:24:24.969: Channel error: HTTP proxy connection not allowed Working console on older cluster: remote-viewer -v --debug console.vv (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Opening display to console.vv (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Guest (null) has a spice display Guest (null) has a spice display (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Spice foreign menu updated (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: After open connection callback fd=-1 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Opening connection to display at console.vv Opening connection to display at console.vv (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: fullscreen display 0: 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: app is not in full screen (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: New spice channel 0x556a03f7e820 SpiceMainChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: notebook show status 0x556a03c7a280 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: main channel: opened (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: notebook show status 0x556a03c7a280 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: virt_viewer_app_set_uuid_string: UUID changed to a2d64ffe-7583-45b6-92f3-87661039388c (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: app is not in full screen (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.502: app is not in full screen (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice channel 0x556a043bb660 SpiceDisplayChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice channel 0x556a0422b570 SpiceCursorChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: New spice channel 0x556a0422c000 SpiceInputsChannel 0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: new inputs channel (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: creating spice display (#:0) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: Insert display 0 0x556a03ca29e0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: creating spice display (#:1) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: Insert display 1 0x556a03ca2830 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: creating spice display (#:2) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.700: Insert display 2 0x556a03ca2680 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.700: creating spice display (#:3) (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.700: Insert display 3 0x556a03ca24d0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.701: Found a window without a display, reusing for display #0 (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.701: notebook show display 0x556a03c7a280 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:00.074: Allocated 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:00.074: Child allocate 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Allocated 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Child allocate 1024x768 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts ---------------- Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ----------------

1 1

[ANN] oVirt 4.3.9 Second Release Candidate is now available for testing
by Lev Veyde 21 Feb '20

21 Feb '20

The oVirt Project is pleased to announce the availability of the oVirt 4.3.9 Second Release Candidate for testing, as of February 20th, 2020. This update is a release candidate of the ninth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available Additional Resources: * Read more about the oVirt 4.3.9 release highlights: http://www.ovirt.org/release/4.3.9/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.9/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

3 2

Understanding dashboard memory data
by nux＠li.nux.ro 21 Feb '20

21 Feb '20

Hello, I'm having to deal with an oVirt installation, once I log in the dashboard says: Memory: "1.2 Available of 4.5 TiB" and "Virtual resources - Committed: 113%, Allocated: 114%". So, clearly there is RAM available, but what's with the committed and allocated numbers? Regards

1 0

Ovirt storage domain ovirt-image-repository is unattached and can't use change CD to install windows on VM
by Heinrich Momberg 20 Feb '20

20 Feb '20

Good day, Whenever i am trying to use the change CD to mount the ovirt tools iso so i can install windows server or any windows it says "could not find ISO file collection".It doesn't pick up the hdd that i have created in the windwos setup so i have to do the whole ovirt tools mount and select the windows i want to insteall etc. It has been working fine until a couple of days ago when we had power outages. I also noticed that the storage domain,ovirt-image-repository is unattached... How do i go about fixing this problem or where can i check logs. I have checked the permissions where the ISO's or images are stored.

3 9

Spacewalk Integration
by eevans＠digitaldatatechs.com 20 Feb '20

20 Feb '20

I finally figured out how to use Spacewalk as an external provider in Ovirt. For the URL I used http://sat.digitaldatatechs.com/XMLRPC and used the admin login credentials. It registered and Spacewalk has the capability of provisioning a bare bones machine. I have not tested provisioning but I will comment once I do.

1 0

Get CPU Family
by Luca 20 Feb '20

20 Feb '20

Hello guys, how can I get the correct CPU Family in a ovirt host? When I execute virsh -r capabilities I get only "Broadwell-noTSX-IBRS" and not the full "Broadwell-noTSX IBRS SSBD MDS" Regards, Luca

3 2

Re: Add LDAP user : ERROR: null value in column "external_id" violates not-null constraint
by Lucas Lamy 20 Feb '20

20 Feb '20

Anybody ?

2 1

Unsynced entries do not self-heal during upgrade from oVirt 4.2 -> 4.3
by Goorkate, B.J. 20 Feb '20

20 Feb '20

Hi all, I'm in the process of upgrading oVirt-nodes from 4.2 to 4.3. After upgrading the first of 3 oVirt/gluster nodes, there are between 600-1200 unsynced entries for a week now on 1 upgraded node and one not-yet-upgraded node. The third node (also not-yet-upgraded) says it's OK (no unsynced entries). The cluster doesn't seem to be very busy, but somehow self-heal doesn't complete. Is this because of different gluster versions across the nodes and will it resolve as soon as I upgraded all nodes? Since it's our production cluster, I don't want to take any risk... Does anybody recognise this problem? Of course I can provide more information if necessary. Any hints on troubleshooting the unsynced entries are more than welcome! Thanks in advance! Regards, Bertjan ------------------------------------------------------------------------------ De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. Het Universitair Medisch Centrum Utrecht is een publiekrechtelijke rechtspersoon in de zin van de W.H.W. (Wet Hoger Onderwijs en Wetenschappelijk Onderzoek) en staat geregistreerd bij de Kamer van Koophandel voor Midden-Nederland onder nr. 30244197. Denk s.v.p aan het milieu voor u deze e-mail afdrukt. ------------------------------------------------------------------------------ This message may contain confidential information and is intended exclusively for the addressee. If you receive this message unintentionally, please do not use the contents but notify the sender immediately by return e-mail. University Medical Center Utrecht is a legal person by public law and is registered at the Chamber of Commerce for Midden-Nederland under no. 30244197. Please consider the environment before printing this e-mail.

3 12

Re: Engine installation failed at - get local vm ip
by shawly 20 Feb '20

20 Feb '20

Still have this problem, log doesn't say anything but that it failed after 90 tries, no reason in the log. Using VMWare Workstation 14, guest is running oVirt Node 4.3.8.

2 1

Can't install virtio-win with EL7.7/Ovirt-4.3.8 -- rpm error
by Derek Atkins 19 Feb '20

19 Feb '20

Hi, I was trying to install the virtio-win package, but it gives an error: ERROR You need to update rpm to handle: rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by virtio-win-0.1.173-6.noarch Is this a known problem with current 4.3.x and EL7.7? -derek -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant

6 7

Re: populating the ISO domain
by Gianluca Cecchi 19 Feb '20

19 Feb '20

On Wed, Feb 19, 2020 at 4:37 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > No. > > I am using the Spice viewer and my Data domain is on NFS. When I open the > "Change CD" option in the viewer, I only see ISO's from the ISO Domain. > > I haven't found any other way to actually mount an ISO to a VM other then > the viewer which kinda sucks. I am used to other environments where I could > just mount an ISO to a cdrom in the VM config and it shows up in the OS. > > If you can shutdown the VM, you could try to shutdown it and then choose the arrow near "run" and select "run once". There you can attach an iso: do you see your data domain isos there? In my case I have isos on block based data domains: I cannot dynamically change cd due to the bug I reported, but if I start a VM with "run once" I can see the ISOs on data domain available and usable (eg to install OS) See also the "Explanation of Settings in the Run Once Window" section here: https://www.ovirt.org/documentation/vmm-guide/appe-Reference_Settings_in_Ad… Gianluca

2 1

Re: populating the ISO domain
by Vinícius Ferrão 19 Feb '20

19 Feb '20

Hi. ISO domains were deprecated. Now you should use a Data Domain instead and fill with the ISOs. If you still using ISO Domain, like me, I only scp the ISOs directly to the storage. You don’t need to use the ISO uploader script. I never made it work anyway LOL. Sent from my iPhone > On 19 Feb 2020, at 04:33, "eevans(a)digitaldatatechs.com" <eevans(a)digitaldatatechs.com> wrote: >

3 2

Re: populating the ISO domain
by Gianluca Cecchi 19 Feb '20

19 Feb '20

On Wed, Feb 19, 2020 at 4:11 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > So I had also read that ISO Domains have been deprecated but ran into an > issue when using console access. It seems that the client does not see any > ISO files from the Data domains when using the "Change CD" option and that > is the only option that I have found to be able to use when I need to mount > an ISO file to a VM. > > Am I missing something? If not, how can we deprecate the ISO Domain? > > In case of data domains on block based storage (iSCSI and FC) there is this outstanding bugzilla not fixed yet: https://bugzilla.redhat.com/show_bug.cgi?id=1589763 I don't know if it is your use case. Gianluca

3 2

Re: populating the ISO domain
by Strahil Nikolov 19 Feb '20

19 Feb '20

On February 19, 2020 5:37:28 PM GMT+02:00, Robert Webb <rwebb(a)ropeguru.com> wrote: >No. > >I am using the Spice viewer and my Data domain is on NFS. When I open >the "Change CD" option in the viewer, I only see ISO's from the ISO >Domain. > >I haven't found any other way to actually mount an ISO to a VM other >then the viewer which kinda sucks. I am used to other environments >where I could just mount an ISO to a cdrom in the VM config and it >shows up in the OS. > >________________________________________ >From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> >Sent: Wednesday, February 19, 2020 10:34 AM >To: Robert Webb >Cc: Vinícius Ferrão; eevans(a)digitaldatatechs.com; users(a)ovirt.org >Subject: Re: [ovirt-users] Re: populating the ISO domain > >On Wed, Feb 19, 2020 at 4:11 PM Robert Webb ><rwebb(a)ropeguru.com<mailto:rwebb@ropeguru.com>> wrote: >So I had also read that ISO Domains have been deprecated but ran into >an issue when using console access. It seems that the client does not >see any ISO files from the Data domains when using the "Change CD" >option and that is the only option that I have found to be able to use >when I need to mount an ISO file to a VM. > >Am I missing something? If not, how can we deprecate the ISO Domain? > > >In case of data domains on block based storage (iSCSI and FC) there is >this outstanding bugzilla not fixed yet: >https://bugzilla.redhat.com/show_bug.cgi?id=1589763 > >I don't know if it is your use case. > >Gianluca >_______________________________________________ >Users mailing list -- users(a)ovirt.org >To unsubscribe send an email to users-leave(a)ovirt.org >Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >oVirt Code of Conduct: >https://www.ovirt.org/community/about/community-guidelines/ >List Archives: >https://lists.ovirt.org/archives/list/users@ovirt.org/message/FYMZYKUUGQZHQ… What about going in Admin portal, select the VM, and then click the 3 dots button ? There should be a 'Eject' and all your ISOs (I have already migrated to data domain). Best Regards, Strahil Nikolov

2 1

Re: hosted-engine --deploy --restore-from-file fails with error "Domain format is different from master storage domain format"
by dev＠djagoo.io 19 Feb '20

19 Feb '20

Hi Shani, on the productive cluster (Default) the compat level is 4.3 and on the cluster it's 4.3 too so I can't raise the level to update the format to V5. I added some screenshots. Regards Marcel On Tuesday, February 18, 2020 10:51:29 AM CET you wrote: > Hi Marcel, > Can you make sure the DC and Cluster formats are V5? > Maybe try to "update" them by editing the cluster first, and selecting the > newest Compatibility Version available. > Then, do the same for the DC. > > If all versions/formats are of V5, and it still occurs, can you please > share some screenshots so I'll have a look? > > > *Regards,* > > *Shani Leviim* > > On Mon, Feb 17, 2020 at 5:08 PM djagoo <dev(a)djagoo.io> wrote: > > Hi Shani, > > > > I just tried it. > > > > I created a new DC and cluster, added a temporary host to this cluster > > which served as SPM. The new DC showed up as V5. > > Then I activated maintenance on one of the V4 SDs and detached it from my > > production domain. After I attached it to the V5 dummy domain it was > > updated to V5 format as you predicted. I detached it again but could not > > reattach it to the production domain "There are no compatible Storage > > Domains to attach to this Data Center". So this seems not to be the > > solution :( > > > > Do you have another idea or am I doing something wrong? > > > > Regards, > > > > Marcel > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/XV6WQNGS3LQU > > 3GWMR62MNZ5ENQA4BJQZ/

3 4

new glance server
by Tommaso - Shellrent 19 Feb '20

19 Feb '20

Hi to all. I'm try to create a glance server to store our images, but I have some problem. With the guide i can correcty configure a "train" minimun stack with keyone and glance, but it only support auth api v3. oVirt for glance only support v2. The newest version of keystone that have the v2 api, is Pike, but it cannot be insalled on centos today. Where a can fine an old repo with pike packages? or how can i make a glance installation that doesn't require autentication? Regards, Tommaso. -- Shellrent Logo *Tommaso De Marchi* COO Chief Operating Officer - Shellrent S.r.l. Tel. 0444321155 <tel:+390444321155> | Fax 04441492177 Via dell'Edilizia, 19 - 36100 Vicenza

2 2

Error with LDAP
by Lucas Lamy 19 Feb '20

19 Feb '20

Hello everyone. I have previously configured LDAP connexion though ovirt-engine-extension-aaa-ldap-setup. The only working configuration was IBM Security Directory Server (the IBM Security Directory Server RFC-2307 Schema doesn't work), ladps and anonymous search user. But the LDAP server I’m testing is OpenLDAP and not IBM. Indeed with IBM the search and login are working fine when I test them with ovirt-engine-extensions-tool aaa. But when I try to add a LDAP User in the User Administration Panel I get this Error message : "Error while executing action AddUser : Internal Engine Error". None of the solutions I've found on previous threads seems to works. Does someone have an idea please ? Please find the logs attached. Thank you beforehand. Caused by: org.postgresql.util.PSQLException: ERROR: null value in column "external_id" violates not-null constraint Detail: Failing row contains (**user info**). Where: SQL statement "INSERT INTO users ( department, domain, email, name, note, surname, user_id, username, external_id, namespace ) VALUES ( v_department, v_domain, v_email, v_name, v_note, v_surname, v_user_id, v_username, v_external_id, v_namespace )" PL/pgSQL function insertuser(character varying,character varying,character varying,character varying,character varying,character varying,uuid,character varying,text,character varying) line 3 at SQL state$ at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2433) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:2178) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:306) at org.postgresql.jdbc.PgStatement.executeInternal(PgStatement.java:441) at org.postgresql.jdbc.PgStatement.execute(PgStatement.java:365) at org.postgresql.jdbc.PgPreparedStatement.executeWithFlags(PgPreparedStatement.java:155) at org.postgresql.jdbc.PgCallableStatement.executeWithFlags(PgCallableStatement.java:78) at org.postgresql.jdbc.PgPreparedStatement.execute(PgPreparedStatement.java:144) at org.jboss.jca.adapters.jdbc.CachedPreparedStatement.execute(CachedPreparedStatement.java:303) at org.jboss.jca.adapters.jdbc.WrappedPreparedStatement.execute(WrappedPreparedStatement.java:442) at org.springframework.jdbc.core.JdbcTemplate.lambda$call$4(JdbcTemplate.java:1105) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:1050) [spring-jdbc.jar:5.0.4.RELEASE] ... 162 more 2020-02-15 10:16:53,337+01 ERROR [org.ovirt.engine.core.bll.aaa.AddUserCommand] (default task-4) [222f7ca7-b669-40e0-b152-2ca898ebde09] Transaction rolled-back for command 'org.ovirt.engine.core.bll.aaa.$ 2020-02-15 10:16:53,341+01 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-4) [222f7ca7-b669-40e0-b152-2ca898ebde09] EVENT_ID: USER_FAILED_ADD_ADUSER(327), Fail, Failed to add User 'user' to the system.

2 2

populating the ISO domain
by eevans＠digitaldatatechs.com 19 Feb '20

19 Feb '20

This may be common knowledge so if it is redundant, apologies. My ISO domain did not populate automatically but with some research I found out how to utilize it and populate it. If you have it in place with the correct permissions and security, you can manually populate it using the api. From the engine host at the command prompt: # ovirt-iso-uploader list This gives you the name of your iso domain. If it prompts for a passwd, it should the the same as the admin@internal login. The to upload files and populate it: ovirt-iso-uploader -i ISO upload *.iso or *vfd for floppy images I hope this helps.

1 0