- Users - oVirt List Archives

Node not starting | blk_cloned_rq_check_limits: over max size limit
by Stefan Wolf 31 Dec '19

31 Dec '19

hi all, i ve 4 nodes running with current ovirt. I ve only a problem on one host even after a fresh installation . I ve installed the latest image. Than I add the node to the cluster Everything is working good. After this I configure the network. BUT, after a restart the host does not come up again. I got this error: blk_cloned_rq_check_limits: over max size limit every 5 seconds I can continue with control-D or I can login with root password to fix the problem. but i dont know what is the problem and where does it came from I ve also changed the sas disk to nvme storage, but I ve changed this on every host. And this problem exists only on one host i found this https://lists.centos.org/pipermail/centos/2017-December/167727.html the output is [root@kvm380 ~]# ./test.sh Sys Block Node : Device max_sectors_kb max_hw_sectors_kb /sys/block/dm-0 : onn_kvm380-pool00_tmeta 256 4096 /sys/block/dm-1 : onn_kvm380-pool00_tdata 256 4096 /sys/block/dm-10 : onn_kvm380-var 256 4096 /sys/block/dm-11 : onn_kvm380-tmp 256 4096 /sys/block/dm-12 : onn_kvm380-home 256 4096 /sys/block/dm-13 : onn_kvm380-var_crash 256 4096 /sys/block/dm-2 : onn_kvm380-pool00-tpool 256 4096 /sys/block/dm-3 : onn_kvm380-ovirt--node--ng--4.3.7--0.20191121.0+1 256 4096 /sys/block/dm-4 : onn_kvm380-swap 256 4096 /sys/block/dm-5 : eui.0025385991b1e27a 512 2048 /sys/block/dm-6 : eui.0025385991b1e27a1 512 2048 /sys/block/dm-7 : onn_kvm380-pool00 256 4096 /sys/block/dm-8 : onn_kvm380-var_log_audit 256 4096 /sys/block/dm-9 : onn_kvm380-var_log 256 4096 cat: /sys/block/nvme0n1/device/vendor: Datei oder Verzeichnis nicht gefunden /sys/block/nvme0n1: Samsung SSD 970 EVO 1TB 512 2048 /sys/block/sda : HP LOGICAL VOLUME 256 4096 is the nvme not starting correct [root@kvm380 ~]# systemctl status multipathd ● multipathd.service - Device-Mapper Multipath Device Controller Loaded: loaded (/usr/lib/systemd/system/multipathd.service; enabled; vendor preset: enabled) Active: active (running) since Di 2019-12-31 16:16:32 CET; 31min ago Process: 1919 ExecStart=/sbin/multipathd (code=exited, status=0/SUCCESS) Process: 1916 ExecStartPre=/sbin/multipath -A (code=exited, status=0/SUCCESS) Process: 1911 ExecStartPre=/sbin/modprobe dm-multipath (code=exited, status=0/SUCCESS) Main PID: 1921 (multipathd) Tasks: 7 CGroup: /system.slice/multipathd.service └─1921 /sbin/multipathd Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 Dez 31 16:47:58 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: 259:0: reinstated Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: queue_if_no_path enabled Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Recovered to normal mode Dez 31 16:48:02 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 1 Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: nvme0n1: mark as failed Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: Entering recovery mode: max_retries=4 Dez 31 16:48:03 kvm380.durchhalten.intern multipathd[1921]: eui.0025385991b1e27a: remaining active paths: 0 why is it marked as failed? if i create a new volume with cockpit and use it for bricks for gluster, every thing is fine. until reboot maybe some one can point me the direction

1 0

4.2.8 to 4.3.7 > Management slow
by Demeter Tibor 31 Dec '19

31 Dec '19

Dear Users, I've successfully upgraded my 4 node hyperconverged system from 4.2.8 to 4.3.7. After upgrade everything seems to working fine, but the whole management system seems very slow. Spends many seconds when I clicking on "virtual machines" or I want to edit a virtual machines. The speed of vms and the IO is fine. It is running on a glusterfs (distributed replicate, on 3 node, 9 bricks). There are no errors, everything fine. but terrible slow:( The engine vm has 0.2-0.3 load. What can I do? Thanks in advance and I wish Happy New Year! Regards, Tibor

1 0

Re: Issue deploying self hosted engine on new install
by Strahil 31 Dec '19

31 Dec '19

Hi, Most probably it is a bug. Can you add 'debugger: on_failed' to the task ? Maybe it will provide a hint where is the issue. Best Regards, Strahil NikolovOn Dec 31, 2019 06:36, realapyo(a)gmail.com wrote: > > Hi, > > I have encountered the same error that results in the failure of hosted engine deployment. I have tried to replace "ovirt_host_facts" by "ovirt_host_info" in /usr/share/ansible/roles/ovirt.hosted_engine_setup/tasks/bootstrap_local_vm/05_add_host.yml however it did not help with the following error message: > > 2019-12-31 11:23:27,595+0900 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 TASK [ovirt.hosted_engine_setup : Wait for the host to be up] > 2019-12-31 11:23:28,997+0900 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:103 {u'msg': u"The conditional check 'host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )' failed. The error was: error while evaluating conditional (host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )): 'dict object' has no attribute 'ansible_facts'", u'_ansible_no_log': False} > 2019-12-31 11:23:29,098+0900 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:107 fatal: [localhost]: FAILED! => {"msg": "The conditional check 'host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )' failed. The error was: error while evaluating conditional (host_result_up_check is succeeded and host_result_up_check.ansible_facts.ovirt_hosts|length >= 1 and ( host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'up' or host_result_up_check.ansible_facts.ovirt_hosts[0].status == 'non_operational' )): 'dict object' has no attribute 'ansible_facts'"} > > According to the latest doc of Ansible (2.9) regarding "ovirt_host_facts", it is deprecated and one should use "ovirt_host_info" instead as you can refer here: https://docs.ansible.com/ansible/latest/modules/ovirt_host_facts_module.html > > And one of the requirements to use "ovirt_host_info" is "ovirt-engine-sdk-python >= 4.3.0" however in my installation, the installed package is "python-ovirt-engine-sdk4 (4.3.2-2.el7)" instead of "ovirt-engine-sdk-python". The "ovirt-engine-sdk-python" package is available however the version is 3.6.9.1-1.el7. > > I have been trying to install the latest oVirt (based in 4.3 repository) and hyperconverged mode using 3 nodes. Tried already with cockpit installation and now debugging it by using CLI installation. > > Is this a bug or is there already a fix? > > Best regards, > Sang-Un > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/V2OYCPZAHUVLF…

1 0

Re: Cannot add Foreman as a provider
by Strahil 30 Dec '19

30 Dec '19

Maybe 6.1 means Foreman with Red Hat Satellite 6.1 ? Best Regards, Strahil NikolovOn Dec 30, 2019 16:41, Robert Webb <rwebb(a)ropeguru.com> wrote: > > oVirt – 4.3.7 > > Foreman - foreman-1.24.0-15.el7.noarch > > > > I have not tried any downgrades at this point. > > > > Looking at this page, https://www.ovirt.org/documentation/admin-guide/chap-External_Providers.html , it would seem that 4.3.x of oVirt is not compatible with any version of Foreman, as the page shows oVirt 4.2 is supported with Foreman 6.1. Which also confuses me as I cannot find any Foreman version 6.1. > > > > > > From: Strahil Nikolov <hunter86_bg(a)yahoo.com> > Sent: Sunday, December 29, 2019 5:00 PM > To: users <users(a)ovirt.org>; Robert Webb <rwebb(a)ropeguru.com> > Subject: Re: [ovirt-users] Cannot add Foreman as a provider > >

2 1

Re: Cannot add Foreman as a provider
by Strahil Nikolov 30 Dec '19

30 Dec '19

Hi Robert, I'm just speculating, but maybe the package on the oVirt is too new or too old ? What version is your Foreman ? Have you tried to downgrade/upgrade the packages for the integration between the 2 systems ? Best Regards,Strahil Nikolov В неделя, 29 декември 2019 г., 18:53:53 ч. Гринуич+2, Robert Webb <rwebb(a)ropeguru.com> написа: So I just setup a brand new Foreman instance and have been trying to get it setup with oVirt. I was able to install the oVirt plugins under Foreman and have the oVirt engine setup as a computer resource. Where I am running into an issue is adding Foreman as an additional provider under oVirt. In the log I get: Command 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' failed: EngineException: https://foreman.saroza-webb.internal:443/api/v2/discovered_hosts?format=jso… (Failed with error PROVIDER_FAILURE and code 5050) I have done some searching, but everything I have found seems to be from years ago and deals with oVirt 3.5.x Any thoughts? _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CO64DW24PDJJC…

2 1

Re: what is "use host" field in storage domain creation??
by Strahil 30 Dec '19

30 Dec '19

I think SPM is not doing initial setup - just other tasks - like snapshots creation/deletion. Best Regards, Strahil NikolovOn Dec 30, 2019 11:57, yam yam <hyunooudy(a)gmail.com> wrote: > > isn't it SPM's job? > and is the "use host" required only for setup? > > thanks for quick replying. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IRQCB37EXLOHQ…

1 0

what is "use host" field in storage domain creation??
by hyunooudy＠gmail.com 30 Dec '19

30 Dec '19

hello and happy new year~ I am wondering the role of "use host" field in storage domain creation. https://www.ovirt.org/documentation/install-guide/chap-Configuring_Storage.… above link says all communication to the storage domain is through "use host". but I can't understand inefficiently passing through that "use host" even though every host can directly access to all domains. it seems like i am misunderstanding something.

3 2

what is "use host" field in storage domain creation??
by hyunooudy＠gmail.com 30 Dec '19

30 Dec '19

hello and happy new year~ I am wondering role of "use host" field in storage domain creation. https://www.ovirt.org/documentation/install-guide/chap-Configuring_Storage.… above link says all communication to the storage domain is through "use host". but I can't understand inefficiently passing through that "use host" even though every host can directly access to all domains. it seems like i am misunderstanding something.

1 0

Cannot add Foreman as a provider
by Robert Webb 29 Dec '19

29 Dec '19

So I just setup a brand new Foreman instance and have been trying to get it setup with oVirt. I was able to install the oVirt plugins under Foreman and have the oVirt engine setup as a computer resource. Where I am running into an issue is adding Foreman as an additional provider under oVirt. In the log I get: Command 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' failed: EngineException: https://foreman.saroza-webb.internal:443/api/v2/discovered_hosts?format=jso… (Failed with error PROVIDER_FAILURE and code 5050) I have done some searching, but everything I have found seems to be from years ago and deals with oVirt 3.5.x Any thoughts?

1 0

Metrics
by gregory.day＠target.com 29 Dec '19

29 Dec '19

Hello. I'm trying to deploy the metrics store and the ansible run fails at "TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts]" I've tried adding the -vvv and ANSIBLE_DEBUG=1, but that isn't giving me any additional information on why it is failing. fatal: [localhost]: FAILED! => { "attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false } When I edit the playbook and set no_log: true, the output is shown, but the resulting log shows that the "ansible_facts.ovirt_vms[0].fqdn" dictionary key does not exist. What is the best way to work around this issue? Thanks, Greg

2 1

No virtio-win vfd oVirt 4.3.7
by Vrgotic, Marko 27 Dec '19

27 Dec '19

Dear oVIrt, I am trying to install Windows 10 on oVirt, following procedure on: https://www.ovirt.org/documentation/vmm-guide/chap-Installing_Windows_Virtu… Unfortunately, there is no option as explained in the “Installing Windows on VirtIO-Optimized Hardware”. There is just no “virtio-win.vfd” option when attaching Floppy. Is this valid. I have ISO Domain, which is not hosted by Hosted Engine, but mounte additionally. Is this required in order to have the virtio-win.vfd option? If not, please let me know what am I missing. In the meanwhile, I am working on building custom Wind 10 ISO which contains Virtio/Virtio-SCSI drivers. Kindly awaiting your reply. ----- kind regards/met vrindelijke groet Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

2 2

ovirt-host 4.4.0 Task Update system failed to execute - Running QEMU processes found, cannot upgrade Vdsm
by alexandermurashkin＠msn.com 27 Dec '19

27 Dec '19

On a regular basis, there is "Task Update system failed to execute" error in the engine.log. At the same time, the ovirt-host-mgmt-ansible-check log contains "Running QEMU processes found, cannot upgrade Vdsm" error. Is there some configuration setting that controls it? Why oVirt is trying to update ovirt-host package on the host at all if there are virtual machines running? Note that 2019-12-27 11:57:21,880-06 INFO [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] (EE-ManagedScheduledExecutorService-engineThreadMonitoringThreadPool-Thread-1) [] Thread pool 'hostUpdatesChecker' is using 0 threads out of 5, 3 threads waiting for tasks. 2019-12-27 12:02:30,878-06 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedExecutorService-hostUpdatesChecker-Thread-4) [] EVENT_ID: ANSIBLE_RUNNER_EVENT_NOTIFICATION(559), Check for update of host harrier. Gathering Facts. 2019-12-27 12:02:45,990-06 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedExecutorService-hostUpdatesChecker-Thread-4) [] EVENT_ID: ANSIBLE_RUNNER_EVENT_NOTIFICATION(559), Check for update of host harrier. Install ovirt-host package if it isn't installed. 2019-12-27 12:02:55,024-06 ERROR [org.ovirt.engine.core.bll.host.HostUpgradeManager] (EE-ManagedExecutorService-hostUpdatesChecker-Thread-4) [] Failed to read host packages: Task Update system failed to execute: 2019-12-27 12:02:55,025-06 ERROR [org.ovirt.engine.core.bll.hostdeploy.HostUpdatesChecker] (EE-ManagedExecutorService-hostUpdatesChecker-Thread-4) [] Failed to check if updates are available for host 'harrier' with error message 'Task Update system failed to execute: ' 2019-12-27 12:02:55,106-06 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedExecutorService-hostUpdatesChecker-Thread-4) [] EVENT_ID: HOST_AVAILABLE_UPDATES_FAILED(839), Failed to check for available updates on host harrier with message 'Task Update system failed to execute: '. 2 # rpm -q ovirt-host ovirt-host-4.4.0-0.2.alpha.el8.x86_64 # dnf update Updating Subscription Management repositories. Last metadata expiration check: 0:11:31 ago on Fri Dec 27 13:16:55 2019. Error: Running QEMU processes found, cannot upgrade Vdsm. # dnf update ovirt-host Updating Subscription Management repositories. Extra Packages for Enterprise Linux 8 - x86_64 7.3 kB/s | 5.3 kB 00:00 GlusterFS 6 packages for x86_64 2.8 kB/s | 3.0 kB 00:01 GlusterFS 6 noarch packages 18 kB/s | 3.0 kB 00:00 virtio-win builds roughly matching what will be shipped in upcoming RHEL 8.2 kB/s | 3.0 kB 00:00 Copr repo for EL8_collection owned by sbonazzo 10 kB/s | 3.6 kB 00:00 Copr repo for gluster-ansible owned by sac 13 kB/s | 3.3 kB 00:00 Copr repo for ovsdbapp owned by mdbarroso 14 kB/s | 3.3 kB 00:00 Copr repo for nmstate-stable owned by nmstate 14 kB/s | 3.3 kB 00:00 Copr repo for NetworkManager-1.20 owned by networkmanager 14 kB/s | 3.3 kB 00:00 Latest oVirt master nightly snapshot 4.0 kB/s | 3.0 kB 00:00 Latest oVirt master additional nightly snapshot 5.0 kB/s | 3.0 kB 00:00 Red Hat CodeReady Linux Builder for RHEL 8 x86_64 (RPMs) 14 kB/s | 4.5 kB 00:00 Red Hat Enterprise Linux 8 for x86_64 - BaseOS (RPMs) 27 kB/s | 4.1 kB 00:00 Red Hat Enterprise Linux 8 for x86_64 - AppStream (RPMs) 36 kB/s | 4.5 kB 00:00 Dependencies resolved. Nothing to do. Complete! ------------------------- ovirt-host-mgmt-ansible-check log -------------------------------------------- 2019-12-27 12:02:45 CST - TASK [ovirt-host-upgrade : Update system] ************************************** 2019-12-27 12:02:55 CST - fatal: [harrier....]: FAILED! => {"changed": false, "failures": [], "msg": "Unknown Error occured: Running QEMU processes found, cannot upgrade Vdsm.", "rc": 1, "results": []} 2019-12-27 12:02:55 CST - { "status" : "OK", "msg" : "", "data" : { "event" : "runner_on_failed", "uuid" : "74b495fa-2534-4850-b905-7255fed1fc56", "stdout" : "fatal: [harrier...]: FAILED! => {\"changed\": false, \"failures\": [], \"msg\": \"Unknown Error occured: Running QEMU processes found, cannot upgrade Vdsm.\", \"rc\": 1, \"results\": []}", "counter" : 26, "pid" : 27445, "created" : "2019-12-27T18:02:53.245099", "end_line" : 25, "runner_ident" : "094f2f72-28d3-11ea-bc88-525400060930", "start_line" : 24, "event_data" : { "play_pattern" : "all", "play" : "all", "event_loop" : null, "task_args" : "", "remote_addr" : "harrier....", "res" : { "_ansible_no_log" : false, "changed" : false, "results" : [ ], "msg" : "Unknown Error occured: Running QEMU processes found, cannot upgrade Vdsm.", "rc" : 1, "invocation" : { "module_args" : { "lock_timeout" : 300, "update_cache" : true, "conf_file" : null, "exclude" : [ ], "allow_downgrade" : false, "disable_gpg_check" : false, "disable_excludes" : null, "validate_certs" : true, "state" : "latest", "disablerepo" : [ ], "releasever" : null, "skip_broken" : false, "autoremove" : false, "download_dir" : null, "installroot" : "/", "install_weak_deps" : true, "name" : [ "*" ], "download_only" : false, "bugfix" : false, "list" : null, "install_repoquery" : true, "update_only" : false, "disable_plugin" : [ ], "enablerepo" : [ ], "security" : false, "enable_plugin" : [ ] } }, "failures" : [ ] }, "pid" : 27445, "play_uuid" : "52540006-0930-56fb-1424-000000000006", "task_uuid" : "52540006-0930-56fb-1424-000000000012", "task" : "Update system", "playbook_uuid" : "758d0326-a52a-4fe9-87b3-6be0d3492784", "playbook" : "ovirt-host-upgrade.yml", "task_action" : "yum", "host" : "harrier....", "ignore_errors" : null, "role" : "ovirt-host-upgrade", "task_path" : "/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-upgrade/tasks/main.yml:18" }, "parent_uuid" : "52540006-0930-56fb-1424-000000000012" } }

1 1

I had a crash yesterday in my ovirt cluster,I just tried to add a new network，Which migration Policy do you recommend?
by zhouhao＠vip.friendtimes.net 27 Dec '19

27 Dec '19

I had a crash yesterday in my ovirt cluster, which is made up of 3 nodes. I just tried to add a new network, but the whole cluster crashed I added a new network to my cluster, but while I was debugging the newswitch, when the switch was poweroff, the node detected the network card status down and then moved to Non-Operational state. At this time all of 3 nodes moved to Non-Operational state. All virtual machines have started automatic migration,When I received the alert email, all virtual machines were suspended In 15 minutes my newswitch were power up again.The 3 ovirt-nodes become active again, but many virtual machines become unresponsive or suspended due to forced migration, and only a few virtual machines are pulled up again due to cancelled migration After I tried to terminate the migration tasks and restart ovirt-engine service, I was still unable to restore most of the virtual machines, so I had to restart 3 ovirt-nodes to restore my virtual machine I didn't recover all the virtual machines until an hour later Then I modify my migration policy to " Do Not Migrate Virtual Machines" Which migration Policy do you recommend? I'm afraid to use cluster... zhouhao(a)vip.friendtimes.net

1 0

Re: Overt Node | Non-Responsive
by Strahil 26 Dec '19

26 Dec '19

Hi Vijay, Can you share the error messages in thelogs ,as the screenshot shows only 'INFO' messages. Best Regards, Strahil NikolovOn Dec 26, 2019 10:17, Vijay Sachdeva <vijay.sachdeva(a)indiqus.com> wrote: > > Dear Team, > > > > I have a host on which I am using local storage for my VMs. Now I rebooted my host because it was shifted to another location, right now in vdsm logs I see errors like: > > > > > > Where in host I can see my mounted LVM volume is perfectly fine. I started VSDM services and libvirtd, but host is not leaving Non-Responsive state. > > > > Any help ..!! > > > > > > Vijay Sachdeva > > > >

1 0

Re: oVirt and Containers
by Jan Zmeskal 26 Dec '19

26 Dec '19

Okay, so this topic is quite vast, but I believe I can at the very least give you a few pointers and maybe others might chime in as well. Firstly, there's the Kubevirt project. It enables you to manage both application containers and virtual machines workloads (that cannot be easily containerized) in a shared environment. Another benefit is getting advantages of the powerful Kubernetes scheduler. I myself am not too familiar with Kubevirt, so I can only offer this high-level overview. More info here: https://kubevirt.io/ Then there is another approach which I am more familiar with. You might want to use oVirt as an infrastructure layer on top of which you run containerized workflow. This is achieved by deploying either OpenShift <https://www.openshift.com/> or the upstream project OKD <https://www.okd.io/> in the oVirt virtual machines. In that scenario, oVirt VMs are considered by OpenShift as compute resources and are used for scheduling containers. There are some advantages to this setup and two come into mind. Firstly, you can scale such OpenShift cluster up or down by adding/removing oVirt VMs according to your needs. Secondly, you don't need to set up all of this yourself. For OpenShift 3, Red Hat provides detailed guide on how to go about this. Part of that guide are Ansible playbooks that automate the deployment for you as long as you provide required variables. More info here: https://docs.openshift.com/container-platform/3.11/install_config/configuri… When it comes to OpenShift 4, there are two types of deployment. There's UPI - user provisioned infrastructure. In that scenario, you prepare all the resources for OpenShift 4 beforehand and deploy it in that existing environment. And there's also IPI - installer provisioned infrastructure. This means that you just give the installer access to your environment (e.g. AWS public cloud) and the installer provisions resources for itself based on recommendations and best practices. At this point, neither UPI nor IPI is supported for oVirt. However there is a GitHub repository <https://github.com/sa-ne/openshift4-rhv-upi> that can guide you through UPI installation on oVirt and also provides automation playbooks for that. I have personally followed the steps from the repository and deployed OpenShift 4.2 on top of oVirt without any major issues. As far as I remember, I might have needed occasional variable here and there but the process worked. Hope this helps! Jan On Tue, Dec 24, 2019 at 8:21 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > Hi Jan, > > Honestly, I didn't have anything specific in mind, just what is being used > out there today and what may be more prevalent. > > Just getting my oVIrt set up and want to know what might be recommended. > Would probably be mostly deploying images like Homeassistent, piHole, etc.. > for now. > > I guess if there is good oVirt direct integration, it would be nice to > keep it all in a single interface. > > Thanks.. > > ________________________________________ > From: Jan Zmeskal <jzmeskal(a)redhat.com> > Sent: Tuesday, December 24, 2019 1:54 PM > To: Robert Webb > Cc: users > Subject: Re: [ovirt-users] oVirt and Containers > > Hi Robert, > > there are different answers based on what you mean by integrating oVirt > and containers. Do you mean: > > - Installing container management (Kubernetes or OpenShift) on top of > oVirt and using oVirt as infrastructure? > - Managing containers from oVirt interface? > - Running VM workloads inside containers? > - Something different? > > I can elaborate more based on your specific needs > > Best regards > Jan > > On Tue, Dec 24, 2019 at 3:52 PM Robert Webb <rwebb(a)ropeguru.com<mailto: > rwebb(a)ropeguru.com>> wrote: > I was searching around to try and figure out the best way to integrate > oVirt and containers. > > I have found some sites that discuss it but all of them are like 2017 and > older. > > Any recommendations? > > Just build VM’s to host containers or is there some direct integration? > > Here are a couple of the old sites > > https://fromanirh.github.io/containers-in-ovirt.html > > > https://kubernetes.io/docs/setup/production-environment/on-premises-vm/ovir… > > > https://www.ovirt.org/develop/release-management/features/integration/conta… > _______________________________________________ > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org<mailto: > users-leave(a)ovirt.org> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/7BIW2Z3ILBSAG… > > > -- > > Jan Zmeskal > > Quality Engineer, RHV Core System > > Red Hat <https://www.redhat.com> > > [ > https://marketing-outfit-prod-images.s3-us-west-2.amazonaws.com/f5445ae0c9d… > ]<https://www.redhat.com> > > -- Jan Zmeskal Quality Engineer, RHV Core System Red Hat <https://www.redhat.com> <https://www.redhat.com>

2 1

Overt-Engine Down | Host Unresponsive
by Vijay Sachdeva 26 Dec '19

26 Dec '19

Dear Team, I have one question, if Ovirt-engine goes down for some reason. Will it impact my host to go un-responsive and all VMs down? I just faced a situation where my host was in un-responsive status and all VMs were down. I restart the ovirt-engine service and host got activated. Can anyone let me know this situation? Thanks Vijay Sachdeva

2 1

oVirt on a dedicated server with a single NIC and IP
by alexcustos＠gmail.com 26 Dec '19

26 Dec '19

Hi, My goal is to set up the latest oVirt on a dedicated server (Hetzner) with a single NIC and IP. Then using a Reverse Proxy and/or VPN (on the same host) to manage connections to VMs. I expected I could add a subnet as an alias to the main interface, or set it up on VLAN, or using vSwitch at the last resort, but all my attempts failed. Some configurations work until the first reboot, then VDSM screw up the main interface and I lost connection to the server, or Hosted Engine doesn't start from global maintenance. I've run out of good ideas already. I'm extremely sorry if this question already been discussed somewhere, but I found nothing helpful. I would be very appreciated for any hint on how to achieve this or at least a confirmation that the desired configuration is viable.

2 2

Overt Node | Non-Responsive
by Vijay Sachdeva 26 Dec '19

26 Dec '19

Dear Team, I have a host on which I am using local storage for my VMs. Now I rebooted my host because it was shifted to another location, right now in vdsm logs I see errors like: Where in host I can see my mounted LVM volume is perfectly fine. I started VSDM services and libvirtd, but host is not leaving Non-Responsive state. Any help ..!! Vijay Sachdeva

1 0

Re: [ovirt 4.2]vdsm host was shutdown unexpectly, configure of some vms was changed or lost when host was re-powered on and vm was started
by Strahil 25 Dec '19

25 Dec '19

Hi, If the VMs are starting properly and they don't use cloudinit - then the issue is not oVirt specific, but guest specific (Linux/Windows depending on guest OS). So your should check: 1. Does your host have any Netwprks out of sync (Host's network tab) If yes - put the server into maintenance and fix the issue (host's network tab) 2. Check each VM's configuration if it is defined to use CloudInit -> if yes, verify that cloudinit's service is running on the guest 3. Verify each problematic guest's network settings. If needed, set a static IP and try to ping another IP from the same subnet/Vlan . Best Regards, Strahil NikolovOn Dec 25, 2019 11:41, lifuqiong(a)sunyainfo.com wrote: >> >> >>> Dear All: >>> My ovirt engine managed two vdsms with nfs storage on another nfs server, it worked fine about three months. >>> One of host (host_1.3; ip:172.18.1.3) was created about 16 vms, but the host_1.3 was shutdown unexpectly about 2019-12-23 16:11, when re-started host and vms; half of the vms was lost some configure or changed , such as lost theirs ip etc.(the vm name is 'zzh_Chain49_ACG_M' in the vdsm.log) >>> >>> the vm zzh_Chain49_ACG_M was create by rest API through vm's templated . the template is 20.1.1.161; the vm zzh_Chain49_ACG_M was created by ovirt rest api and changed the ip to 20.1.1.219 >>> by ovirt rest api. But the ip was changed to templated ip when the accident happened. >>> >>> the vm's os is centos. >>> >>> Hope get help from you soon, Thank you. >>> >>> Mark >>> Sincerely.

1 0

[ovirt 4.2]vdsm host was shutdown unexpectly, configure of some vms was changed or lost when host was re-powered on and vm was started
by lifuqiong＠sunyainfo.com 25 Dec '19

25 Dec '19

Dear All: My ovirt engine managed two vdsms with nfs storage on another nfs server, it worked fine about three months. One of host (host_1.3; ip:172.18.1.3) was created about 16 vms, but the host_1.3 was shutdown unexpectly about 2019-12-23 16:11, when re-started host and vms; half of the vms was lost some configure or changed , such as lost theirs ip etc.(the vm name is 'zzh_Chain49_ACG_M' in the vdsm.log) the vm zzh_Chain49_ACG_M was create by rest API through vm's templated . the template is 20.1.1.161; the vm zzh_Chain49_ACG_M was created by ovirt rest api and changed the ip to 20.1.1.219 by ovirt rest api. But the ip was changed to templated ip when the accident happened. the vm's os is centos. Hope get help from you soon, Thank you. Mark Sincerely.

1 0

Re: Subscribe to mailing list and install oVirt with freeIPA
by Yedidyah Bar David 25 Dec '19

25 Dec '19

On Wed, Dec 25, 2019 at 10:45 AM Kien Pham <ptkcc(a)outlook.com> wrote: > > Dear oVirt team, > > I have post a thread on forum but I got problem with mailing list. How can I subscribe the mailing list. > > This is the question. > > Dear all, > > I am installing oVirt but I got an error when running engine-setup and get the following notification: > > [ INFO ] Restarting httpd > [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'httpd' > [ INFO ] Stage: Clean up > Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20191224111455-ppsefr.log > [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20191224111745-setup.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Execution of setup failed > > I think that the problem is freeIPA. I installed freeIPA to manage user authetication. But IPA is currently using port 80 so httpd service cannot start. Right. This isn't supported, for exactly this reason. The ovirt-engine rpm conflicts with ipa-server. How did you install it? I now see that there is also a package python2-ipaserver, and in fedora and el8 also python3-ipaserver. Now pushed a patch to conflict with them as well: https://gerrit.ovirt.org/105935 Anyway, you'll have to set them up on two different machines. Thanks for the report, and sorry for the failure... Good luck and best regards, -- Didi

1 0

Re: oVirt and Containers
by Jan Zmeskal 24 Dec '19

24 Dec '19

Hi Robert, there are different answers based on what you mean by integrating oVirt and containers. Do you mean: - Installing container management (Kubernetes or OpenShift) on top of oVirt and using oVirt as infrastructure? - Managing containers from oVirt interface? - Running VM workloads inside containers? - Something different? I can elaborate more based on your specific needs Best regards Jan On Tue, Dec 24, 2019 at 3:52 PM Robert Webb <rwebb(a)ropeguru.com> wrote: > I was searching around to try and figure out the best way to integrate > oVirt and containers. > > > > I have found some sites that discuss it but all of them are like 2017 and > older. > > > > Any recommendations? > > > > Just build VM’s to host containers or is there some direct integration? > > > > Here are a couple of the old sites > > > > https://fromanirh.github.io/containers-in-ovirt.html > > > > > https://kubernetes.io/docs/setup/production-environment/on-premises-vm/ovir… > > > > > https://www.ovirt.org/develop/release-management/features/integration/conta… > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/7BIW2Z3ILBSAG… > -- Jan Zmeskal Quality Engineer, RHV Core System Red Hat <https://www.redhat.com> <https://www.redhat.com>

2 1

Subscribe to mailing list and install oVirt with freeIPA
by Kien Pham 24 Dec '19

24 Dec '19

Dear oVirt team, I have post a thread on forum but I got problem with mailing list. How can I subscribe the mailing list. This is the question. Dear all, I am installing oVirt but I got an error when running engine-setup and get the following notification: [ INFO ] Restarting httpd [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'httpd' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20191224111455-ppsefr.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20191224111745-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed I think that the problem is freeIPA. I installed freeIPA to manage user authetication. But IPA is currently using port 80 so httpd service cannot start. Is there any suggest. Thank for all reply. Best regards. Kimloai.

1 0

Re: ovirt 4.3.7 + Gluster in hyperconverged (production design)
by Strahil 24 Dec '19

24 Dec '19

On Dec 24, 2019 02:18, Jayme <jaymef(a)gmail.com> wrote: > > If you can afford it I would definitely do raid. Being able to monitor and replace disks at the raid level is much easier than brick. With raid I’d do a gluster arbiter setup so your aren’t losing too much space. > > Keep an eye on libgfapi. It’s not default setting due to a few bugs but I’ve been testing it in my ssd hci cluster and have been seeing up to 5x io improvement. Also jumbo frames on those 10Gbps switches. > > Someone else will probably chime in re the other questions. I believe the GUI can only deploy a three sever cluster then you have to add the remaining hosts afterward. > > On Mon, Dec 23, 2019 at 5:56 PM <adrianquintero(a)gmail.com> wrote: >> >> Hi, >> After playing a bit with oVirt and Gluster in our pre-production environment for the last year, we have decided to move forward with a our production design using ovirt 4.3.7 + Gluster in a hyperconverged setup. >> >> For this we are looking get answers to a few questions that will help out with our design and eventually lead to our production deployment phase: >> >> Current HW specs (total servers = 18): >> 1.- Server type: DL380 GEN 9 >> 2.- Memory: 256GB >> 3.-Disk QTY per hypervisor: >> - 2x600GB SAS (RAID 0) for the OS I would pick Raid1 and split that between OS and brick for engine 's gluster volume >> - 9x1.2TB SSD (RAID[0, 6..]..? ) for GLUSTER. If you had bigger NICs I would preffer RAID0. Have you considered JBOD approach (each disk is presented as a standalone LUN from the raid array) ? Raid 6 is waste for your SSDs (when you already have replica 3 volumes). Ask HPE to provide SSDs from different manufacturing batches. I think that with SSD thee best compromise will be RAID 5 with replica3 for faster reads. As the SSDs will be overwritten with the same ammount of data, there could be a situation where all 3 from a replica set will be in predictive failiure (which is not nice) - that's why a raid 5 is a good option. >> 4.-Network: >> - Bond1: 2x10Gbps >> - Bond2: 2x10Gbps (for migration and gluster) Do not use Active-Backup bond as you will loose bandwidth. LACP (with hashing on layer 3+ layer4) is a good option, but it depends if your machines will be in the same LAN segment (communicating over layer 2 and no gateway inbetween). >> Our plan is to build 2x9 node clusters, however the following questions come up: >> >> 1.-Should we build 2 separate environments each with its own engine? or should we do 1 engine that will manage both clusters? If you decide to split - you have less fault tollerance - for example loosing 3 ot of 18 is better than loosing 3 out of 9 nodes :) >> 2.-What would be the best gluster volume layout for #1 above with regards to RAID configuration: >> - JBOD or RAID6 or…?. RAID6 wastes alot of space >> - what is the benefit or downside of using JBOD vs RAID 6 for this particular scenario? >> 3.-Would you recommend Ansible-based deployment (if supported)? If yes where would I find the documentation for it? or should we just deploy using the UI?. There is a topic in the mailing list about issues with ansible.It's up to you. >> - I have reviewed the following and in Chapter 5 it only mentions Web UI https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infras… >> - Also looked at https://github.com/gluster/gluster-ansible/tree/master/playbooks/hc-ansible… but could not get it to work properly. >> >> 4.-what is the recommended max server qty in a hyperconverged setup with gluster, 12, 15, 18...? I don't remmember but I think it was 9 nodes for Hyperconverged setup in RHV. >> Thanks, >> >> Adrian Best Regards, Strahil Nikolov

1 0

Re: Problems after 4.3.8 update
by Mahdi Adnan 24 Dec '19

24 Dec '19

We had an issue after upgrading Gluster nodes to 6.6, we had memory leak in gluster self heal daemon which cause it to do infinite heal and ate all of the nodes RAM "128GB", we had to downgrade to 6.5 to solve the problem. I think it is related to the changes made to the SHD code in version 6.6 ( 1760706 <https://bugzilla.redhat.com/1760706>) I might find the time and try to bug report the issue. Anyway, glad you solved your issue.

1 0