- Users - oVirt List Archives

Re: 4.3.x upgrade and issues with OVN
by Weber, Charles (NIH/NIA/IRP) [E] 30 Apr '19

30 Apr '19

Complete shutdown of 4.3.3 cluster, change cluster from 4.2 to 4.3 compatibility and upgrade of all hosts to current 4.3.3 with patches has seemingly fixed everything.

1 0

Re: Please Help, Ovirt Node Hosted Engine Deployment Problems 4.3.2
by Strahil 30 Apr '19

30 Apr '19

> Each data has to be written on the host itself and on the two remote ones so you are going to have 1000 mbps / 2 (external replicas ) / 8 (bit/bytes) = a max of 62.5 MB/s sustained throughput shared between all the VMs and this ignoring all the overheads. > In practice it will be much less ending in a barely usable environment. I am currently in this type of setup (replica 2 arbiter 1 on 1 gbit/s both storage and oVirt connectivity) and the maximum write (sequential) speed I can reach is aprox 89 MB/s. I guess with replica 3 the maximum will be as Simone stated. My maximum read speed is aprox 500 MB/s despite that local NVMe is capable of 1.3 GB/s and I guess FUSE is not using the local brick no matter I have set it up with cluster.use-local (or whatever it was called). If possible , get a 10 gbit/s connectivity or multiple gbit interfaces ( as I'm planing to do in the nearest future). Best Regards, Strahil Nikolov

1 0

HA VM not work when VM OS cannot run normally
by du_hongyu＠yeah.net 30 Apr '19

30 Apr '19

HI， I create a HA VM in ovirt follaw this article https://ovirt.org/develop/ha-vms.html#highly-available-vms-and-io-errors when my vm‘s OS can not run, but ovirt consider this vm is up, so is this a bug for HA VM? can you give me some advise? Regards Hongyu Du

2 4

Ovirt Nested in VMWare (Working approach)
by RabidCicada 30 Apr '19

30 Apr '19

I worked through this previously and posted in IRC yesterday about working around running ovirt nested under VMWare. I figured i'd post it to the mail group so that it would be available in it's entirety here for future reference: The following gists explain the 3 major adjustments that have to be made currently to get nested virt under vmware working: https://gist.github.com/RabidCicada/993349b3a7eaf35637122f0122fdedb3 https://gist.github.com/RabidCicada/bc01eb0b13195faa26520c0fb666ec34 https://gist.github.com/RabidCicada/37ff6f1ed2afd8dd4edefac735536c69 https://gist.github.com/RabidCicada/40655db1582ca5d07c9bbf2c429cdd01 Hopefully it can save others the huge amount of time it took me to figure it all out. Specifically it's a problem with the --machine type at 3 major parts of the vm creation for the hosted-engine. 1) You have to fix the virt-install to use --machine pc-i440fx-rhel7.2.0 2) You have to fix the guestfish spinup of the partially configured vm to use --machine pc-i440fx-rhel7.2.0, where they edit the nic config among other things 3) You have to tell vdsm on the node to use --machine pc-i440fx-rhel7.2.0 I don't know the underlying reason why a --machine type > pc-i440fx-rhel7.2.0 breaks the system but it ends up resulting in a bios freeze. Again, Hope this helps someone. Suggested only to use for a test/dev system.

2 1

[QA][Feedback Needed] RDO Stein integration testing
by Sandro Bonazzola 30 Apr '19

30 Apr '19

Hi, RDO Stein has been released a few days ago: https://blogs.rdoproject.org/2019/04/rdo-stein-released/ I opened test bug for the providers oVirt is consuming from OpenStack: Neutron, Glance and Cinder. Has anyone capacity for testing this (not on production systems!) and give feedback? Bug 1704350 <https://bugzilla.redhat.com/show_bug.cgi?id=1704350> - Test neutron integration with RDO Stein Bug 1704349 <https://bugzilla.redhat.com/show_bug.cgi?id=1704349> - Test glance integration with RDO Stein Bug 1704352 <https://bugzilla.redhat.com/show_bug.cgi?id=1704352> - Test Cinder integration with RDO Stein Thanks, -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

ovirt 4.3.3 cannot create VM in non-default cluster
by Strahil Nikolov 29 Apr '19

29 Apr '19

Hi All, I'm having an issue to create a VM in my second cluster called "Intel" which consists of only 1 Host -> ovirt3 which plays the role of a gluster arbiter in my hyperconverged setup. When I try to create the VM (via UI) I receive: "Cannot add VM. CPU Profile doesn't match provided Cluster." When I try to select the host where I can put the VM , I see only ovirt1 or ovirt2 which are part of the 'Default' Cluster . Do we have an opened bug for that ? Note: A workaround is to create the VM in the Default cluster and later edit it to match the needed Cluster. Best Regards,Strahil Nikolov

1 2

4.3.3 restore fails
by magnus＠boden.one 29 Apr '19

29 Apr '19

Hello, I had a ovirt-engine-4.3.0 that I am migrating to a new machine. I have done a backup of that machine but the restore fails on the new machine. Fresh install of centos and the 4.3.3 ovirt-engine. [root@oengine ~]# engine-backup --mode=restore --file=ovirt-engine-backup-20190426214711.backup --log=02.17.log --provision-db --provision-dwh-db --restore-permissions Start of engine-backup with mode 'restore' scope: all archive file: ovirt-engine-backup-20190426214711.backup log file: 02.17.log Preparing to restore: - Unpacking file 'ovirt-engine-backup-20190426214711.backup' Restoring: - Files Provisioning PostgreSQL users/databases: - user 'engine', database 'engine' - user 'ovirt_engine_history', database 'ovirt_engine_history' Restoring: - Engine database 'engine' FATAL: Errors while restoring database engine [root@oengine ~]# cat 02.17.log 2019-04-27 02:17:55 32343: Start of engine-backup mode restore scope all file ovirt-engine-backup-20190426214711.backup 2019-04-27 02:17:55 32343: OUTPUT: Start of engine-backup with mode 'restore' 2019-04-27 02:17:55 32343: OUTPUT: scope: all 2019-04-27 02:17:55 32343: OUTPUT: archive file: ovirt-engine-backup-20190426214711.backup 2019-04-27 02:17:55 32343: OUTPUT: log file: 02.17.log 2019-04-27 02:17:55 32343: Setting scl env for rh-postgresql10 2019-04-27 02:17:55 32343: OUTPUT: Preparing to restore: 2019-04-27 02:17:55 32343: OUTPUT: - Unpacking file 'ovirt-engine-backup-20190426214711.backup' 2019-04-27 02:17:55 32343: Opening tarball ovirt-engine-backup-20190426214711.backup to /tmp/engine-backup.NVv4Bxjb2k 2019-04-27 02:17:55 32343: Verifying hash 2019-04-27 02:17:55 32343: Verifying version 2019-04-27 02:17:55 32343: Reading config 2019-04-27 02:17:55 32343: OUTPUT: Restoring: 2019-04-27 02:17:55 32343: OUTPUT: - Files 2019-04-27 02:17:55 32343: Restoring files 2019-04-27 02:17:56 32343: Reloading configuration 2019-04-27 02:17:56 32343: OUTPUT: Provisioning PostgreSQL users/databases: 2019-04-27 02:17:56 32343: provisionDB: user engine host localhost port 5432 database engine secured False secured_host_validation False 2019-04-27 02:17:56 32343: OUTPUT: - user 'engine', database 'engine' [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', '/tmp/engine-backup.NVv4Bxjb2k/pg-provision-answer-file'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021756-hxbrea.log Version: otopi-1.8.1 (otopi-1.8.1-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization [ INFO ] Stage: Setup validation [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021756-hxbrea.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ INFO ] Execution of provisiondb completed successfully 2019-04-27 02:17:58 32343: provisionDB: user ovirt_engine_history host localhost port 5432 database ovirt_engine_history secured False secured_host_validation False 2019-04-27 02:17:58 32343: OUTPUT: - user 'ovirt_engine_history', database 'ovirt_engine_history' [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', '/tmp/engine-backup.NVv4Bxjb2k/pg-provision-answer-file'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021758-s2av1b.log Version: otopi-1.8.1 (otopi-1.8.1-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization [ INFO ] Stage: Setup validation [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-provisiondb-20190427021758-s2av1b.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ INFO ] Execution of provisiondb completed successfully 2019-04-27 02:18:00 32343: OUTPUT: Restoring: 2019-04-27 02:18:00 32343: Generating pgpass 2019-04-27 02:18:00 32343: Verifying connection 2019-04-27 02:18:00 32343: pg_cmd running: psql -w -U engine -h localhost -p 5432 engine -c select 1 ?column? ---------- 1 (1 row) 2019-04-27 02:18:00 32343: pg_cmd running: psql -w -U engine -h localhost -p 5432 engine -t -c show lc_messages 2019-04-27 02:18:00 32343: pg_cmd running: pg_dump -w -U engine -h localhost -p 5432 engine -s 2019-04-27 02:18:01 32343: pg_cmd running: psql -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -c select 1 ?column? ---------- 1 (1 row) 2019-04-27 02:18:01 32343: pg_cmd running: psql -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -t -c show lc_messages 2019-04-27 02:18:01 32343: pg_cmd running: pg_dump -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -s 2019-04-27 02:18:01 32343: OUTPUT: - Engine database 'engine' 2019-04-27 02:18:01 32343: Restoring engine database backup at /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db 2019-04-27 02:18:01 32343: restoreDB: backupfile /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db user engine host localhost port 5432 database engine orig_user compressor format custom jobsnum 2 2019-04-27 02:18:01 32343: pg_cmd running: pg_restore -w -U engine -h localhost -p 5432 -d engine -j 2 /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db pg_restore: [archiver (db)] Error while PROCESSING TOC: pg_restore: [archiver (db)] Error from TOC entry 7624; 0 0 COMMENT EXTENSION plpgsql pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension plpgsql Command was: COMMENT ON EXTENSION plpgsql IS 'PL/pgSQL procedural language'; pg_restore: [archiver (db)] Error from TOC entry 7625; 0 0 COMMENT EXTENSION "uuid-ossp" pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension uuid-ossp Command was: COMMENT ON EXTENSION "uuid-ossp" IS 'generate universally unique identifiers (UUIDs)'; pg_restore: [archiver (db)] Error from TOC entry 6400; 2606 18298 CONSTRAINT external_variable pk_external_variable engine pg_restore: [archiver (db)] could not execute query: ERROR: could not create unique index "pk_external_variable" DETAIL: Key (var_name)=(fence-kdump-listener-heartbeat) is duplicated. Command was: ALTER TABLE ONLY public.external_variable ADD CONSTRAINT pk_external_variable PRIMARY KEY (var_name); WARNING: errors ignored on restore: 4 2019-04-27 02:18:43 32343: Non-ignored-errors in pg_restore log: pg_restore: [archiver (db)] could not execute query: ERROR: could not create unique index "pk_external_variable" 2019-04-27 02:18:43 32343: FATAL: Errors while restoring database engine If this is a problem while restoring a 4.3.0 backup to a 4.3.3 engine is it possible to install the 4.3.0 version? Following the installation part of the release notes of 4.3.0 will result in 4.3.3 being installed. Best Regards Magnus

2 2

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Upgraded ovirt-4.2 to ovirt-4.3 and VM run fails
by Gobinda Das 29 Apr '19

29 Apr '19

Hi, I have upgraded ovirt-4.2 to ovirt-4.3 and after upgrade while starting vms giving me error: Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details: The host *node1.test.com <http://node1.test.com>* did not satisfy internal filter ClusterInMaintenance because the cluster is in maintenance and only highly available VMs are allowed to start. The host *node2.test.com <http://node2.test.com>* did not satisfy internal filter ClusterInMaintenance because the cluster is in maintenance and only highly available VMs are allowed to start. The host *node3.test.com <http://node3.test.com>* did not satisfy internal filter ClusterInMaintenance because the cluster is in maintenance and only highly available VMs are allowed to start. Eventhough cluster is not in maintenance mode. This setup is using gluster6 for storage. -- Thanks, Gobinda

2 1

HA VMs fail to start on host failure
by tezmobile＠googlemail.com 29 Apr '19

29 Apr '19

In a host failure situation, we see that oVirt tries to restart the VMs on other hosts in the cluster but this (more often than not) fails due to kvm being unable to acquire a write lock on the qcow2 image. We see ovirt attempt to restart the VMs several times, each time on different hosts but with the same outcome after which it gives up trying. After this we must log into the oVirt web interface and start the VM manually, which works fine (by this time we assume enough time has passed for the lock to clear itself). This behaviour is experienced with Centos 7.6, Libvirt 4.5.0-10, vdsm 4.30.13-1 Log excerpt from hosted engine: 2019-04-24 17:05:26,653+01 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-82) [] VM 'ef7e04f0-764a-4cfe-96bf-c0862f1f5b83'(vm-21.example.local) moved from 'WaitForLaunch' --> 'Down' 2019-04-24 17:05:26,710+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-82) [] EVENT_ID: VM_DOWN_ERROR(119), VM vm-21.example.local is down with error. Exit message: internal error: process exited while connecting to monitor: 2019-04-24T16:04:48.049352Z qemu-kvm: -drive file=/rhev/data-center/mnt/192.168.111.111:_/21a1390b-b73b-46b1-85b9-2bbf9bba5308/images/c9d96ab6-cb0b-4fba-9b07-096ff750c7f7/16da3660-1afe-40a3-b868-3a74e74bab2f,format=qcow2,if=none,id=drive-ua-c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,serial=c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,werror=stop,rerror=stop,cache=none,aio=threads: 'serial' is deprecated, please use the corresponding option of '-device' instead 2019-04-24T16:04:48.079989Z qemu-kvm: -drive file=/rhev/data-center/mnt/192.168.111.111:_/21a1390b-b73b-46b1-85b9-2bbf9bba5308/images/c9d96ab6-cb0b-4fba-9b07-096ff750c7f7/16da3660-1afe-40a3-b868-3a74e74bab2f,format=qcow2,if=none,id=drive-ua-c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,serial=c9d96ab6-cb0b-4fba-9b07-096ff750c7f7,werror=stop,rerror=stop,cache=none,aio=threads: Failed to get "write" lock So my question is, how can I either force oVirt to continue to try restarting the VM or delay the initial VM restart for enough time to allow locks to clear?

1 0

Template Disk Corruption
by Alex McWhirter 29 Apr '19

29 Apr '19

1. Create server template from server VM (so it's a full copy of the disk) 2. From template create a VM, override server to desktop, so that it become a qcow2 overlay to the template raw disk. 3. Boot VM 4. Shutdown VM 5. Delete VM Template disk is now corrupt, any new machines made from it will not boot. I can't see why this happens as the desktop optimized VM should have just been an overlay qcow file...

2 5

oVirt 4.3.2 Error: genev_sys_6081 is not present in the system
by Dee Slaw 29 Apr '19

29 Apr '19

Hello, I've installed oVirt 4.3.2 and the problem is that it log messages: VDSM ovirt-04 command Get Host Statistics failed: Internal JSON-RPC error: {'reason': '[Errno 19] genev_sys_6081 is not present in the system'} in Open Virtualization Manager. It also keeps on logging in /var/log/messages: Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9861] device (genev_sys_6081): carrier: link connected Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9864] manager: (genev_sys_6081): new Generic device (/org/freedesktop/NetworkManager/Devices/34160) Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9866] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:03 ovirt-04 NetworkManager[8725]: <info> [1553244663.9906] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:03 ovirt-04 kernel: device genev_sys_6081 left promiscuous mode Mar 22 11:51:04 ovirt-04 kernel: device genev_sys_6081 entered promiscuous mode Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0038] device (genev_sys_6081): carrier: link connected Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0042] manager: (genev_sys_6081): new Generic device (/org/freedesktop/NetworkManager/Devices/34161) Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0044] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:04 ovirt-04 NetworkManager[8725]: <info> [1553244664.0082] device (genev_sys_6081): enslaved to non-master-type device ovs-system; ignoring Mar 22 11:51:04 ovirt-04 kernel: device genev_sys_6081 left promiscuous mode Mar 22 11:51:04 ovirt-04 kernel: device genev_sys_6081 entered promiscuous mode Also I can see the following in /var/log/openvswitch: 2019-03-22T08:53:12.413Z|131047|bridge|WARN|could not add network device ovn-034a1c-0 to ofproto (File exists) 2019-03-22T08:53:12.431Z|131048|tunnel|WARN|ovn-a21088-0: attempting to add tunnel port with same config as port 'ovn-0836d7-0' (::->192.168.10.24, key=flow, legacy_l2, dp port=2) 2019-03-22T08:53:12.466Z|131055|connmgr|WARN|accept failed (Too many open files) 2019-03-22T08:53:12.466Z|131056|unixctl|WARN|punix:/var/run/openvswitch/ovs-vswitchd.9103.ctl: accept failed: Too many open files In ovsdb-server.log: 2019-03-22T03:24:12.583Z|05792|jsonrpc|WARN|unix#28684: receive error: Connection reset by peer 2019-03-22T03:24:12.583Z|05793|reconnect|WARN|unix#28684: connection dropped (Connection reset by peer) How to fix this issue with geneve tunnels?

4 11

Re: All Windows vms report "Actual timezone in guest doesn't match configuration"
by Strahil 29 Apr '19

29 Apr '19

What happens when you restart ovirt agent services ? Best Regards, Strqhil NikolovOn Apr 26, 2019 03:06, michael(a)wanderingmad.com wrote: > > All of my windows VMs have a yellow exclamation point with the timezone error. The configuration in ovirt says eastern time, and I've tried changing the VM from eastern time to US eastern time, and error does not go away. This is with the latest ovirt guest tools for windows. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XL6XHN5KIEM7G…

2 1

Fetching DiskAttachmentService in ovirt-python-sdk-4
by Kaustav Majumder 29 Apr '19

29 Apr '19

Hi, I am trying to detach and delete disk from my vm. I found this service in the docs DiskAttachmentService http://ovirt.github.io/ovirt-engine-sdk/master/services.m.html#ovirtsdk4.se… I am not able to fetch this service. Below if the snippet of code I am trying. https://pastebin.com/UUu0Pfc8 Error--> File "./pre_setup/delete_vm_disk.py", line 19, in remove_attached_vm_disk attachment.remove(detach_only=False) AttributeError: 'DiskAttachment' object has no attribute 'remove' -- Thanks, Kaustav Majumder

3 4

One Way Flights Deals - Tripiflights
by marketings＠tripiflights.com 29 Apr '19

29 Apr '19

searching for one way flights deals . tripiflights is the perfect place for you. Here you will get best options at reasonable rates - https://go2article.com/article/one-way-flights-deals-tripiflights/

1 0

unable to upload disk images after upgrade to 4.3.3 -- ticket failures
by Edward Berger 29 Apr '19

29 Apr '19

Previously I had issues with the upgrades to 4.3.3 failing because of "stale" image transfer data, so I removed it from the database using the info given here on the mailing list and was able to complete the oVirt node and engine upgrades. Now I have a new problem. I can't upload a disk image anymore, which used to work. "test connection" returns success. In the dashboard Storage/Disks view, it starts and then stops with "paused by system" I tried pointing it at another node, same problem. I tried restarting services ovirt-imageio-proxy on engine and ovirt-imageio-daemon on the node, same failure. in the dashboard events when trying to upload disk I get this error Transfer was stopped by system. Reason: failed to add image ticket to ovirt-imageio-proxy. or when trying to resume transfer "paused by system" giving it the local path again. Transfer was stopped by system. Reason: failure in transfer image ticket renewal. I'm not sure what logs I should be looking deeper into.. Here's what the database says engine=# select * from image_transfers; -[ RECORD 1 ]-------------+------------------------------------- command_id | 59dce2b1-f8ba-44dd-9df9-c6e39773a3f9 command_type | 1024 phase | 4 last_updated | 2019-04-23 12:22:25.098-04 message | Uploading from byte 0 vds_id | disk_id | 6693d5ac-d3eb-43d7-9abe-97c5197efc23 imaged_ticket_id | proxy_uri | signed_ticket | bytes_sent | 0 bytes_total | 1996488704 type | 2 active | f daemon_uri | client_inactivity_timeout | 60 -[ RECORD 2 ]-------------+------------------------------------- command_id | 16898219-be5b-4826-8f20-3355fa47272a command_type | 1024 phase | 4 last_updated | 2019-04-23 16:15:34.591-04 message | Uploading from byte 0 vds_id | disk_id | 3b8e3053-bfe4-49d3-abd2-5452b1674400 imaged_ticket_id | proxy_uri | signed_ticket | bytes_sent | 0 bytes_total | 1998585856 type | 2 active | f daemon_uri | client_inactivity_timeout | 60 I really need the image uploading to work. Any suggestions on what to do next?

2 2

removal of vdsm-hook-macspoof
by Dan Kenigsberg 28 Apr '19

28 Apr '19

vdsm-hook-macspoof was created to let VM owners override the vdsm-no-mac-spoofing that was once hard-coded on each vNIC. Since ovirt-4.0's Bug 1317441 - [RFE] Allow MAC Anti-Spoofing per interface instead of globally the hook is no longer needed, because ovirt-engine supports selection of filters, including the "Empty" one. Thus, we can finally drop vdsm-hook-macspoof from vdsm code. https://gerrit.ovirt.org/#/c/94613/ does that. If someone still depends on setting the ifacemacspoof custom property, they can find and fix the vnic profiles using a script similar to the following one. Note that ovirtlib does not yet have an easy-to-pull canonical location. from __future__ import print_function import sys from ovirtlib.system import SDKSystemRoot from ovirtlib.netlib import Network, VnicProfile, CustomProperty, NetworkFilter from ovirtlib.datacenterlib import DataCenter system = SDKSystemRoot() system.connect(url=URL, insecure=True, password=PASSWORD, username=USER) spoof_cp = CustomProperty(name='ifacemacspoof', value='true') broken_profiles = [ profile for profile in VnicProfile.iterate(system) if spoof_cp in profile.custom_properties and profile.filter and profile.filter.name == 'vdsm-no-mac-spoofing'] if broken_profiles: if '--modify' in sys.argv: print('clearing vdsm-no-mac-spoof filter from profiles:') for profiles in broken_profiles: print(profile.name) profile.filter = None else: print('''ifacemacspoof custom property is no longer supported by vdsm. vnic profiles that depended on it for connectivity, e.g they serve VMs with in-guest bonds or vlans, must use an empty network filter instead. profiles with ifacemacspoof and vdsm-no-mac-spoof filter:''') for profiles in broken_profiles: print(profile.name) print('run again with --modify to remove the filter') else: print('no profile with ifacemacspoof and vdsm-no-mac-spoof was found.')

1 0

Resuming VM from suspend that is based on iscsi/fc raise an exception.
by 王猛 28 Apr '19

28 Apr '19

Hi, When I resume a VM from suspend that is based on iscsi or fcp, there's always an exception: ----- 2019-04-17 19:33:58,835+0800 ERROR (vm/baaabf11) [virt.vm] (vmId='baaabf11-172d-4fac-9862-86ff05feb085') The vm start process failed (vm:937) 378 Traceback (most recent call last): 379 File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 866, in _startUnderlyingVm 380 self._run() 381 File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2819, in _run 382 self._connection.restore(fname) 383 File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper 384 ret = f(*args, **kwargs) 385 File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 94, in wrapper 386 return func(inst, *args, **kwargs) 387 File "/usr/lib64/python2.7/site-packages/libvirt.py", line 4513, in restore 388 if ret == -1: raise libvirtError ('virDomainRestore() failed', conn=self) 389 libvirtError: internal error: Child process (gzip -dc) unexpected exit status 2: 390 gzip: stdin: decompression OK, trailing garbage ignored 391 392 2019-04-17 19:33:58,835+0800 INFO (vm/baaabf11) [virt.vm] (vmId='baaabf11-172d-4fac-9862-86ff05feb085') Changed state to Down: internal error: Child process (gzip -dc) unexpected exit status 2: 393 gzip: stdin: decompression OK, trailing garbage ignored 394 (code=1) (vm:1675) ---------- After i read the Bug 1503468 (https://bugzilla.redhat.com/show_bug.cgi?id=1503468#c40) I know the reason why that happened. But how should I avoid this exception? The only method i know and tested is to change gzip to lzop in /etc/libvirt/qemu.conf. But this is not the way to solve the problem. -- 王猛软件研发手机：13021702660 地址：济南市高新区银荷大厦B座10层 250101 邮箱: wang_meng(a)massclouds.com 网址: www.massclouds.com 山东乾云启创信息科技有限公司

1 0

Re: Arbiter brick disk performance
by Strahil 28 Apr '19

28 Apr '19

I think 2 small ssds (raid 1 mdadm) can do the job better as ssds have lower latencies .You can use them both for OS (minimum needed is 60 GB) and the rest will be plenty for an arbiter. By the way, if you plan using gluster snapshots - use thin LVM for the brick. Best Regards, Strahil NikolovOn Apr 24, 2019 16:20, Leo David <leoalex(a)gmail.com> wrote: > > Hello Everyone, > I need to look into adding some enterprise grade sas disks ( both ssd and spinning ), and since the prices are not too low, I would like to benefit of replica 3 arbitrated. > Therefore, I intend to buy some smaller disks for use them as arbiter brick. > My question is, what performance ( regarding iops, througput ) the arbiter disks need to be. Should they be at least the same as the real data disks ? > Knowing that they only keep metadata, I am thinking that will not be so much pressure on the arbiters. > Any thoughts? > > Thank you ! > > > -- > Best regards, Leo David

3 3

Uncaught exception when open Host "Edit" window
by Vrgotic, Marko 27 Apr '19

27 Apr '19

Dear oVIrt, Short platform summary: * 5 Hosts * 3/5 in Shared DC/Cluster with NetApp NFS storage * 1/5 with Local Storage * 1/5 with Local Storage * oVirt version 4.3.2 , recently upgraded from 4.2.8 Each time I click on “Edit” from Hosts View, for each Host: following error is shown in ui.log: 2019-04-23 10:39:09,064Z ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-241) [] Permutation name: 0D2DB7A91B469CC36C64386E5632FAC5 2019-04-23 10:39:09,064Z ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-241) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (TypeError) : oab(...) is null at org.ovirt.engine.ui.webadmin.section.main.view.popup.host.HostPopupView.$lambda$0(HostPopupView.java:693) at org.ovirt.engine.ui.webadmin.section.main.view.popup.host.HostPopupView$lambda$0$Type.eventRaised(HostPopupView.java:693) at org.ovirt.engine.ui.uicompat.Event.$raise(Event.java:99) at org.ovirt.engine.ui.uicommonweb.models.ListModel.$setSelectedItem(ListModel.java:82) at org.ovirt.engine.ui.uicommonweb.models.ListModel.setSelectedItem(ListModel.java:78) at org.ovirt.engine.ui.uicommonweb.models.ListModel.itemsChanged(ListModel.java:236) at org.ovirt.engine.ui.uicommonweb.models.ListModel.$itemsChanged(ListModel.java:224) at org.ovirt.engine.ui.uicommonweb.models.ListModel.$setItems(ListModel.java:102) at org.ovirt.engine.ui.uicommonweb.models.hosts.HostModel.$updateClusterList(HostModel.java:1037) at org.ovirt.engine.ui.uicommonweb.models.hosts.HostModel.$lambda$13(HostModel.java:1017) at org.ovirt.engine.ui.uicommonweb.models.hosts.HostModel$lambda$13$Type.onSuccess(HostModel.java:1017) at org.ovirt.engine.ui.frontend.Frontend$1.$onSuccess(Frontend.java:227) [frontend.jar:] at org.ovirt.engine.ui.frontend.Frontend$1.onSuccess(Frontend.java:227) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.OperationProcessor$1.$onSuccess(OperationProcessor.java:133) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.OperationProcessor$1.onSuccess(OperationProcessor.java:133) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.$onSuccess(GWTRPCCommunicationProvider.java:270) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.onSuccess(GWTRPCCommunicationProvider.java:270) [frontend.jar:] at com.google.gwt.user.client.rpc.impl.RequestCallbackAdapter.onResponseReceived(RequestCallbackAdapter.java:198) [gwt-servlet.jar:] at com.google.gwt.http.client.Request.$fireOnResponseReceived(Request.java:233) [gwt-servlet.jar:] at com.google.gwt.http.client.RequestBuilder$1.onReadyStateChange(RequestBuilder.java:409) [gwt-servlet.jar:] at Unknown.onreadystatechange<(https://ovirt-staging-engine.avinity.tv/ovirt-engine/webadmin/?locale=en_US line 9 > scriptElement) at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:275) [gwt-servlet.jar:] at Unknown.Su/<(https://ovirt-staging-engine.avinity.tv/ovirt-engine/webadmin/?locale=en_US line 9 > scriptElement) at Unknown.anonymous(Unknown) Screenshot of what is shown on UI: [cid:image001.png@01D4F9D2.637FDF40] Please assist. Kindly awaiting your reply. Marko Vrgotic

1 1

NVME-oF
by Daniel Menzel 26 Apr '19

26 Apr '19

Hi guys, just out of curiosity: Have there been any attempts yet to use NVMe over Fabrics as Storage-Backend in oVirt? We have used NVMe-oF several times in the past few weeks/month and its an absolutely gorgeous technology - and more than perfect for virtualization. Best Daniel -- Daniel Menzel Geschäftsführer Menzel IT GmbH Charlottenburger Str. 33a 13086 Berlin +49 (0) 30 / 5130 444 - 00 daniel.menzel(a)menzel-it.net https://menzel-it.net Geschäftsführer: Daniel Menzel Unternehmenssitz: Berlin Handelsregister: Amtsgericht Charlottenburg Handelsregister-Nummer: HRB 149835 B USt-ID: DE 309 226 751

1 0

Re: Ovirt 4.3.2 VM Failover
by Strahil 26 Apr '19

26 Apr '19

I have noticed after full power failiure (all nodes simultaneously - labs don't have UPS yet) one of my VMs was in that state, and I had to restart VDSM in order the engine to notice the crash. Definitely , there is something phishy here... I guess Sahina & Sandro can take a look in your case.. Best Regards, Strahil NikolovOn Apr 26, 2019 02:56, michael(a)wanderingmad.com wrote: > > Is there something in the 4.3.x series that has changed when it comes to VM failover? I have the cluster configurated to automatically migrate all server VMs, but whenever One of the nodes goes down, all the VMs that were on that host switch to a ? status and I have to go and click "host has been rebooted" to have them failed over. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ABOBHQGF2U6JC…

1 0

Ovirt 4.3.2 VM Failover
by michael＠wanderingmad.com 26 Apr '19

26 Apr '19

Is there something in the 4.3.x series that has changed when it comes to VM failover? I have the cluster configurated to automatically migrate all server VMs, but whenever One of the nodes goes down, all the VMs that were on that host switch to a ? status and I have to go and click "host has been rebooted" to have them failed over.

2 1

All Windows vms report "Actual timezone in guest doesn't match configuration"
by michael＠wanderingmad.com 26 Apr '19

26 Apr '19

All of my windows VMs have a yellow exclamation point with the timezone error. The configuration in ovirt says eastern time, and I've tried changing the VM from eastern time to US eastern time, and error does not go away. This is with the latest ovirt guest tools for windows.

1 0

Adding network to VM - What stupid thing have I missed?
by eshwayri＠gmail.com 25 Apr '19

25 Apr '19

When creating a new VM, it looks like I connect it's nic(s) under the "Instantiate VM network interfaces by picking a vNIC profile." setting. The problem I am seeing is that the drop down only has "Empty" and "br-kvm-prod" (my production bridge). I should have two more. Under Networks and vNIC Profiles tabs, I also have a br-kvm-stor and kvm_heart-22 defined which don't appear in that list. Am I missing something I need to do for these additional profiles to also appear in the drop-down? Some of my VMs will need access to the other physical networks.

3 3