- Users - oVirt List Archives

VMs randomly pause due to unknown storage error, unable to resume
by Jon Sattelberger 09 Nov '23

09 Nov '23

Hi, > VM xxx has been paused due to unknown storage error. > Migration failed due to a failed validation: [Migrating a VM in paused status due to I/O error is not supported.] (VM: xxx, Source: yyy). Up until recently oVirt 4.5.4 has been running fine on our RHEL 8 hypervisors with primarily (and a few appliances) Linux guests. We started to add Windows 2019 VMs to the cluster with the guest agent installed. They seem to run fine at first, but some of the Windows VMs may randomly pause due to an unknown storage error. The VM cannot be resumed through the UI or virsh. The paused VM cannot be migrated to another Hypervisor. The GlusterFS storage volumes seem fine. Resetting the VM seems to work, but eventually it'll become paused again. The only thing that came to my mind is the virtual hard disks are thin provisioned. Is a preallocated disk necessary for Windows VMs? Any helpful hints on where to look next is greatly appreciated. Thank you, Jon

2 3

oVirt support for NVMe-oF devices as storage domain.
by lxtakc＠gmail.com 09 Nov '23

09 Nov '23

Hello, We are interested in using oVirt with NVMe-oF devices. Is there an option to connect them as Storage Domain? What should be done to achieve it? Managed Block Storage (cinderlib) is not an option for us, because it doesn't support backups (incremental backups with e.g. Veeam or others). What should be done on oVirt side to support NVMe-oF as Storage Domain (like iSCSI, FCP, NFS)? Thanks.

1 0

Re: how to renew expired ovirt node vdsm cert manually ?
by Dominic Gwerder 09 Nov '23

09 Nov '23

Hi I followed all the instructions but I now get the following error on my host: ovn-controller ovs|08734|stream_ssl|ERR|Private key must be configured to use SSL PRIORITY 3 SYSLOG_FACILITY 3 SYSLOG_IDENTIFIER ovn-controller _BOOT_ID 52c3fc529b1644dbb789384be75b0cab _CAP_EFFECTIVE 7c00 _CMDLINE ovn-controller unix:/run/openvswitch/db.sock -vconsole:emer -vsyslog:err -vfile:info --private-key=/etc/pki/vdsm/keys/vdsmkey.pem --certificate=/etc/pki/vdsm/certs/vdsmcert.pem --ca-cert=/etc/pki/vdsm/certs/cacert.pem --user openvswitch:openvswitch --no-chdir --log-file=/var/log/ovn/ovn-controller.log --pidfile=/run/ovn/ovn-controller.pid --detach _COMM ovn-controller _EXE /usr/bin/ovn-controller Do you have a solution for this? Does the user openvswitch need access to the keys? Thanks in advance. Kind regards, Dominic Gwerder bits ag

1 0

What is the impact of doubling default NumOfPciExpressPorts value?
by ivan.lezhnjov.iv＠gmail.com 09 Nov '23

09 Nov '23

Hi! We've been trying to understand what the effect of increasing NumOfPciExpressPorts might be in terms of system resources consumption and overall system performance of the oVirt Hosts. In this specific scenario, we're running an oVirt deployment with about 100 hosts and thousands of VMs. oVirt allocates 16 PCIe ports by default (or is it QEMU defaults?) and we would like to increase that number to about 30. However, only very few VMs are actually gonna use those extra PCIe ports in terms of having additional devices (like NICs). So, basically, there will be a lot of VMs that have about twice as many PCIe ports available to them than now but not really using them (as in having actual additional devices created and associated with the VMs). How is that going to impact physical servers that are running the VMs? Any potential problems for the VMs themselves? Ivan

1 0

Unable to start HostedEngine
by Devin A. Bougie 08 Nov '23

08 Nov '23

After a failed attempt at migrating our HostedEngine to a new iSCSI storage domain, we're unable to restart the original HostedEngine. Please see below for some details, and let me know what more information I can provide. "Lnxvirt07" was the Host used to attempt the migration. Any help would be greatly appreciated. Many thanks, Devin ------ [root@lnxvirt01 ~]# tail -n 5 /var/log/ovirt-hosted-engine-ha/agent.log MainThread::INFO::2023-11-01 12:29:53,514::state_decorators::51::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(check) Global maintenance detected MainThread::INFO::2023-11-01 12:29:54,151::ovf_store::117::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Found OVF_STORE: imgUUID:05ef954f-d06d-401c-85ec-5992e2afbe7d, volUUID:d2860f1d-19cf-4084-8a7e-d97880c32431 MainThread::INFO::2023-11-01 12:29:54,530::ovf_store::117::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Found OVF_STORE: imgUUID:a375a35b-7a87-4df4-8d29-a5ba371fee85, volUUID:ef8b3dae-bcae-4d58-bea8-cf1a34872267 MainThread::ERROR::2023-11-01 12:29:54,813::config_ovf::65::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config.vm::(_get_vm_conf_content_from_ovf_store) Failed extracting VM OVF from the OVF_STORE volume, falling back to initial vm.conf MainThread::INFO::2023-11-01 12:29:54,843::hosted_engine::531::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state GlobalMaintenance (score: 3400) [root@lnxvirt01 ~]# hosted-engine --vm-start Command VM.getStats with args {'vmID': 'e6370d8f-c083-4f28-83d0-a232d693e07a'} failed: (code=1, message=Virtual machine does not exist: {'vmId': 'e6370d8f-c083-4f28-83d0-a232d693e07a'}) Command VM.create with args {'vmID': 'e6370d8f-c083-4f28-83d0-a232d693e07a', 'vmParams': {'vmId': 'e6370d8f-c083-4f28-83d0-a232d693e07a', 'memSize': '16384', 'display': 'vnc', 'vmName': 'HostedEngine', 'smp': '4', 'maxVCpus': '40', 'cpuType': 'Haswell-noTSX', 'emulatedMachine': 'pc', 'devices': [{'index': '2', 'iface': 'ide', 'address': {'controller': '0', 'target': '0', 'unit': '0', 'bus': '1', 'type': 'drive'}, 'specParams': {}, 'readonly': 'true', 'deviceId': 'b3e2f40a-e28d-493c-af50-c1193fb9dc97', 'path': '', 'device': 'cdrom', 'shared': 'false', 'type': 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': '6afa3b19-7a1a-4e5c-a681-eed756d316e9', 'imageID': '94628710-cf73-4589-bd84-e58f741a4d5f', 'specParams': {}, 'readonly': 'false', 'domainID': '555ad71c-1a4e-42b3-af8c-db39d9b9df67', 'optional': 'false', 'deviceId': '6afa3b19-7a1a-4e5c-a681-eed756d316e9', 'address': {'bus': '0x00', 'slot': '0x06', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', 'propagateErrors': 'off', 'type': 'disk', 'bootOrder': '1'}, {'device': 'scsi', 'model': 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': '00:16:3e:3b:3f:14', 'linkActive': 'true', 'network': 'ovirtmgmt', 'specParams': {}, 'deviceId': '002afd06-9649-4ac5-a5e8-1a4945c3c136', 'address': {'bus': '0x00', 'slot': '0x03', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, {'device': 'console', 'type': 'console'}, {'device': 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'vnc', 'type': 'graphics'}, {'device': 'virtio', 'specParams': {'source': 'urandom'}, 'model': 'virtio', 'type': 'rng'}]}} failed: (code=100, message=General Exception: ("'xml'",)) VM failed to launch [root@lnxvirt01 ~]# cat /etc/ovirt-hosted-engine/hosted-engine.conf fqdn=lnxvirt-engine.classe.cornell.edu vm_disk_id=94628710-cf73-4589-bd84-e58f741a4d5f vm_disk_vol_id=6afa3b19-7a1a-4e5c-a681-eed756d316e9 vmid=e6370d8f-c083-4f28-83d0-a232d693e07a storage=192.168.56.50,192.168.56.51,192.168.56.52,192.168.56.53 nfs_version= mnt_options= conf=/var/run/ovirt-hosted-engine-ha/vm.conf host_id=8 console=vnc domainType=iscsi spUUID=00000000-0000-0000-0000-000000000000 sdUUID=555ad71c-1a4e-42b3-af8c-db39d9b9df67 connectionUUID=e29cf818-5ee5-46e1-85c1-8aeefa33e95d vdsm_use_ssl=true gateway=192.168.55.1 bridge=ovirtmgmt network_test=dns tcp_t_address= tcp_t_port= metadata_volume_UUID=2bf987a2-ab81-454c-9fc7-dc7ec8945fd9 metadata_image_UUID=35429b63-16ca-417a-b87a-d232463bf6a3 lockspace_volume_UUID=b0d09780-2047-433c-812d-10ba0beff788 lockspace_image_UUID=8ccb878d-9938-43c8-908b-e1b416fe991c conf_volume_UUID=0b40ac60-499e-4ff1-83d0-fc578f1af3dc conf_image_UUID=551d4fe5-a9f7-4ba1-9951-87418362b434 # The following are used only for iSCSI storage iqn=iqn.2002-10.com.infortrend:raid.uid58207.001 portal=1 user= password= port=3260,3260,3260,3260 [root@lnxvirt01 ~]# hosted-engine --vm-status !! Cluster is in GLOBAL MAINTENANCE mode !! --== Host lnxvirt06.classe.cornell.edu (id: 1) status ==-- Host ID : 1 Host timestamp : 3718817 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : lnxvirt06.classe.cornell.edu Local maintenance : False stopped : False crc32 : 233a1425 conf_on_shared_storage : True local_conf_timestamp : 3718818 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=3718817 (Wed Nov 1 12:26:35 2023) host-id=1 score=3400 vm_conf_refresh_time=3718818 (Wed Nov 1 12:26:37 2023) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host lnxvirt05.classe.cornell.edu (id: 2) status ==-- Host ID : 2 Host timestamp : 3719461 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : lnxvirt05.classe.cornell.edu Local maintenance : False stopped : False crc32 : b3c81abe conf_on_shared_storage : True local_conf_timestamp : 3719462 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=3719461 (Wed Nov 1 12:26:41 2023) host-id=2 score=3400 vm_conf_refresh_time=3719462 (Wed Nov 1 12:26:42 2023) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host lnxvirt04.classe.cornell.edu (id: 3) status ==-- Host ID : 3 Host timestamp : 3718684 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : lnxvirt04.classe.cornell.edu Local maintenance : False stopped : False crc32 : 03a57b14 conf_on_shared_storage : True local_conf_timestamp : 3718686 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=3718684 (Wed Nov 1 12:26:41 2023) host-id=3 score=3400 vm_conf_refresh_time=3718686 (Wed Nov 1 12:26:43 2023) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host lnxvirt03.classe.cornell.edu (id: 4) status ==-- Host ID : 4 Host timestamp : 3719430 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : lnxvirt03.classe.cornell.edu Local maintenance : False stopped : False crc32 : adb1aad2 conf_on_shared_storage : True local_conf_timestamp : 3719432 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=3719430 (Wed Nov 1 12:26:35 2023) host-id=4 score=3400 vm_conf_refresh_time=3719432 (Wed Nov 1 12:26:36 2023) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host lnxvirt02.classe.cornell.edu (id: 5) status ==-- Host ID : 5 Host timestamp : 3719408 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : lnxvirt02.classe.cornell.edu Local maintenance : False stopped : False crc32 : 1996a067 conf_on_shared_storage : True local_conf_timestamp : 3719410 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=3719408 (Wed Nov 1 12:26:39 2023) host-id=5 score=3400 vm_conf_refresh_time=3719410 (Wed Nov 1 12:26:41 2023) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host lnxvirt07.classe.cornell.edu (id: 7) status ==-- Host ID : 7 Host timestamp : 495392 Score : 0 Engine status : unknown stale-data Hostname : lnxvirt07.classe.cornell.edu Local maintenance : False stopped : True crc32 : 2572e907 conf_on_shared_storage : True local_conf_timestamp : 495352 Status up-to-date : False Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=495392 (Tue Oct 31 10:20:12 2023) host-id=7 score=0 vm_conf_refresh_time=495352 (Tue Oct 31 10:19:33 2023) conf_on_shared_storage=True maintenance=False state=AgentStopped stopped=True --== Host lnxvirt01.classe.cornell.edu (id: 8) status ==-- Host ID : 8 Host timestamp : 1729103 Score : 3400 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : lnxvirt01.classe.cornell.edu Local maintenance : False stopped : False crc32 : 2e57e99d conf_on_shared_storage : True local_conf_timestamp : 1729104 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=1729103 (Wed Nov 1 12:26:31 2023) host-id=8 score=3400 vm_conf_refresh_time=1729104 (Wed Nov 1 12:26:33 2023) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False !! Cluster is in GLOBAL MAINTENANCE mode !!

1 1

Hosted-engine restore failing when migrating to new storage domain
by Devin A. Bougie 08 Nov '23

08 Nov '23

Hello, We have a functioning oVirt 4.5.4 cluster running on fully-updated EL9.2 hosts. We are trying to migrate the self-hosted engine to a new iSCSI storage domain using the existing hosts, following the documented procedure: - set the cluster into global maintenance mode - backup the engine using "engine-backup --scope=all --mode=backup --file=backup.bck --log=backuplog.log" - shutdown the engine - restore the engine using "hosted-engine --deploy --4 --restore-from-file=backup.bck" This almost works, but fails with the attached log file. Any help or suggestions would be greatly appreciated, including alternate procedures for migrating a self-hosted engine from one domain to another. Many thanks, Devin

2 9

Call for participation: Virtualization and Cloud infrastructure Room at FOSDEM 2024
by Piotr Kliczewski 08 Nov '23

08 Nov '23

We are excited to announce that the call for proposals is now open for the Virtualization and Cloud infrastructure devroom at the upcoming FOSDEM 2024, to be hosted on February 3rd 2024. This devroom is a collaborative effort, and is organized by dedicated folks from projects such as OpenStack, Xen Project, KubeVirt, QEMU, KVM, and Foreman. We would like to invite all those who are involved in these fields to submit your proposals by December 8th, 2023. About the Devroom The Virtualization & IaaS devroom will feature session topics such as open source hypervisors or virtual machine managers such as Xen Project, KVM, bhyve and VirtualBox as well as Infrastructure-as-a-Service projects such as KubeVirt, Apache CloudStack, OpenStack, QEMU and OpenNebula. This devroom will host presentations that focus on topics of shared interest, such as KVM; libvirt; shared storage; virtualized networking; cloud security; clustering and high availability; interfacing with multiple hypervisors; hyperconverged deployments; and scaling across hundreds or thousands of servers. Presentations in this devroom will be aimed at developers working on these platforms who are looking to collaborate and improve shared infrastructure or solve common problems. We seek topics that encourage dialog between projects and continued work post-FOSDEM. Important Dates Submission deadline: 8th December 2023 Acceptance notifications: 10th December 2023 Final schedule announcement: 15th December 2023 Devroom: 3rd February 2024 Submit Your Proposal All submissions must be made via the Pretalx event planning site[1]. It is a new submission system so you will need to create an account. If you submitted proposals for FOSDEM in previous years, you won’t be able to use your existing account. During submission please make sure to select Virtualization and Cloud infrastructure from the Track list. Please fill out all the required fields, and provide a meaningful abstract and description of your proposed session. Submission Guidelines We expect more proposals than we can possibly accept, so it is vitally important that you submit your proposal on or before the deadline. Late submissions are unlikely to be considered. All presentation slots are 30 minutes, with 20 minutes planned for presentations, and 10 minutes for Q&A. All presentations will be recorded and made available under Creative Commons licenses. In the Submission notes field, please indicate that you agree that your presentation will be licensed under the CC-By-SA-4.0 or CC-By-4.0 license and that you agree to have your presentation recorded. For example: "If my presentation is accepted for FOSDEM, I hereby agree to license all recordings, slides, and other associated materials under the Creative Commons Attribution Share-Alike 4.0 International License. Sincerely, <NAME>." In the Submission notes field, please also confirm that if your talk is accepted, you will be able to attend FOSDEM and deliver your presentation. We will not consider proposals from prospective speakers who are unsure whether they will be able to secure funds for travel and lodging to attend FOSDEM. (Sadly, we are not able to offer travel funding for prospective speakers.) Code of Conduct Following the release of the updated code of conduct for FOSDEM, we'd like to remind all speakers and attendees that all of the presentations and discussions in our devroom are held under the guidelines set in the CoC and we expect attendees, speakers, and volunteers to follow the CoC at all times. If you submit a proposal and it is accepted, you will be required to confirm that you accept the FOSDEM CoC. If you have any questions about the CoC or wish to have one of the devroom organizers review your presentation slides or any other content for CoC compliance, please email us and we will do our best to assist you. Questions? If you have any questions about this devroom, please send your questions to our devroom mailing list. You can also subscribe to the list to receive updates about important dates, session announcements, and to connect with other attendees. See you all at FOSDEM! [1] <https://penta.fosdem.org/submission/FOSDEM17> https://pretalx.fosdem.org/fosdem-2024/cfp [2] virtualization-devroom-manager at fosdem.org

1 0

Moving hosted-engine to a new cluster
by Ling Ho 08 Nov '23

08 Nov '23

Hello, I set up some new hypervisors recently, created a new cluster using the newer CPU, and migrated all my VMs by changing the cluster and restarting them. Now I have the hosted engine left running in my old cluster. I could not find any recent documentation or discussion on the net. What's the proper way to migrate the hosted engine? I am on oVirt 4.5.4. Thanks, ... ling

1 0

Cannot "Change CD" from VM portal with standard user
by Gianluca Amato 07 Nov '23

07 Nov '23

Hello, I am trying to attach a CD to a virtual machine from the VM Portal as a standard user. When I click on the box for choosing the ISO image, I only get "[Empty]". However, when I access the VM portal as an admin, I correctly see the list of ISO images. I suspect it is a problem of permission: I have assigned to the unprivileged user the UserRole permission both for the VM and the ISO disk images. Am I doing something wrong ? Do I need to assign different roles ? Thanks, --gianluca

2 2

'NoneType' object has no attribute 'data_center'
by marek 07 Nov '23

07 Nov '23

hi, i'm using VM creation through ansible - ovirt 4.5 - name: Creates a new Virtual Machine from template ovirt.ovirt.ovirt_vm: auth: "{{ ovirt_auth }}" state: present cpu_cores: 2 memory: 4GiB name: "{{NAME}}" template: "{{ VM_TEMPLATE }}" comment: "{{comment}}" description: "{{description}}" cluster: "{{CLUSTER}}" type: server high_availability: yes operating_system: rhel_9x64 graphical_console: protocol: - vnc cloud_init_persist: yes nics: - name: enp1s0 profile_name: "{{VLAN1}}" - name: enp2s0 profile_name: "{{VLAN2}}" cloud_init: dns_servers: '1.1.1.1' host_name: "{{NAME}}" user_name: root root_password: "{{ROOT_PASSWORD}}" authorized_ssh_keys: "ssh-ed25519 secret" cloud_init_nics: - nic_name: enp1s0 nic_boot_protocol: static nic_ip_address: "{{PRIVATE_IP}}" nic_netmask: 255.255.255.0 nic_gateway: x.x.x.x - nic_name: enp2s0 nic_boot_protocol: static nic_ip_address: "{{PUBLIC_IP}}" nic_netmask: "{{PUBLIC_NETMASK}}" it works before . double checked input no upgrades/changes any ideas where can be problem? any tips howto debug Marek The full traceback is: Traceback (most recent call last): File "/tmp/ansible_ovirt.ovirt.ovirt_vm_payload_thzzyp5t/ansible_ovirt.ovirt.ovirt_vm_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_vm.py", line 2694, in main File "/tmp/ansible_ovirt.ovirt.ovirt_vm_payload_thzzyp5t/ansible_ovirt.ovirt.ovirt_vm_payload.zip/ansible_collections/ovirt/ovirt/plugins/module_utils/ovirt.py", line 673, in create self.build_entity(), File "/tmp/ansible_ovirt.ovirt.ovirt_vm_payload_thzzyp5t/ansible_ovirt.ovirt.ovirt_vm_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_vm.py", line 1525, in build_entity File "/tmp/ansible_ovirt.ovirt.ovirt_vm_payload_thzzyp5t/ansible_ovirt.ovirt.ovirt_vm_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_vm.py", line 1418, in __get_template_with_version AttributeError: 'NoneType' object has no attribute 'data_center'

1 1

How to start QA and testing work in the oVirt project?
by song_chao＠massclouds.com 06 Nov '23

06 Nov '23

Hello everyone, I am a testing and development engineer who has been working for 10 years. I want to learn and participate in Ovirt's testing work, and make my own contribution. Through learning and understanding, I believe that in the near future, I can also make some contributions to the ovirt community. Currently, I would like some information about QA and testing processes and methods. Can anyone provide me with it? Thank you.

3 4

Missing OVF_STORE disks. Impact and how to recover them?
by ivan.lezhnjov.iv＠gmail.com 06 Nov '23

06 Nov '23

Hi! We have a Local Storage SD (Storage Domain) that is missing both OVF_STORE disks. Clearly this SD is strictly speaking broken but the oVirt Host where this SD is configured and VMs that run on that Host seem to be doing fine. No major problems except for the fact that oVirt Events logs are filled with "VDSM command SetVolumeDescriptionVDS failed: Image path does not exist or cannot be accessed/created" error (and a couple others associated with this one) that is generated every 1 hour. Is this SD in a critical state? Are we risking losing data or anything like that? What is the impact of deleting OVF_STORE disks from an SD? And most importantly is there a way to recover/recreate these OVF_STORE disks?

1 0

Multiple hosts stuck in Connecting state waiting for storage pool to go up.
by ivan.lezhnjov.iv＠gmail.com 06 Nov '23

06 Nov '23

Hi! We have a problem with multiple hosts stuck in Connecting state, which I hoped somebody here could help us wrap our heads around. All hosts, except one, seem to have very similar symptoms but I'll focus on one host that represents the rest. So, the host is stuck in Connecting state and this what we see in oVirt log files. /var/log/ovirt-engine/engine.log: 2023-04-20 09:51:53,021+03 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-37) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = ABC010-176-XYZ, VdsIdAndVdsVDSCommandParametersBase:{hostId='2c458562-3d4d-4408-afc9-9a9484984a91', vds='Host[ABC010-176-XYZ,2c458562-3d4d-4408-afc9-9a9484984a91]'})' execution failed: org.ovirt.vdsm.jsonrpc.client.ClientConnectionException: SSL session is invalid 2023-04-20 09:55:16,556+03 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-67) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ABC010-176-XYZ command Get Host Capabilities failed: Message timeout which can be caused by communication issues /var/log/vdsm/vdsm.log: 2023-04-20 17:48:51,977+0300 INFO (vmrecovery) [vdsm.api] START getConnectedStoragePoolsList() from=internal, task_id=ebce7c8c-6ded-454e-9aee-86edf72764ef (api:31) 2023-04-20 17:48:51,977+0300 INFO (vmrecovery) [vdsm.api] FINISH getConnectedStoragePoolsList return={'poollist': []} from=internal, task_id=ebce7c8c-6ded-454e-9aee-86edf72764ef (api:37) 2023-04-20 17:48:51,978+0300 INFO (vmrecovery) [vds] recovery: waiting for storage pool to go up (clientIF:723) Both engine.log and vdsm.log are flooded with these messages. They are repeated at regular intervals ad infinitum. This is one common symptom shared by multiple hosts in our deployment. They all have these message loops in engine.log and vdsm.log files. On all Running vdsm-client Host getConnectedStoragePools also returns an empty list represented by [] on all hosts (but interestingly there is one that showed Storage Pool UUID and yet it was still stuck in Connecting state). This particular host (ABC010-176-XYZ) is connected to 3 CEPH iSCSI Storage Domains and lsblk shows 3 block devices with matching UUIDs in their device components. So, the storage seems to be connected but the Storage Pool is not? How is that even possible? Now, what's even more weird is that we tried rebooting the host (via Administrator Portal) and it didn't help. We even tried removing and re-adding the host in Administrator Portal but to no avail. Additionally, the host refused to go into Maintenance mode so we had to enforce it by manually updating Engine DB. We also tried reinstalling the host via Administrator Portal and ran into another weird problem, which I'm not sure if it's a related one or a problem that deserves a dedicated discussion thread but, basically, the underlying Ansible playbook exited with the following error message: "stdout" : "fatal: [10.10.10.176]: UNREACHABLE! => {\"changed\": false, \"msg\": \"Data could not be sent to remote host \\\"10.10.10.176\\\". Make sure this host can be reached over ssh: \", \"unreachable\": true}", Counterintuitively, just before running Reinstall via Administrator Portal we had been able to reboot the same host (which as you know oVirt does via Ansible as well). So, no changes on the host in between just different Ansible playbooks. To confirm that we actually had access to the host over ssh we successfully ran ssh -p $PORT root(a)10.10.10.176 -i /etc/pki/ovirt-engine/keys/engine_id_rsa and it worked. That made us scratch our heads for a while but what seems to had fixed Ansible's ssh access problems was manual full stop of all VDSM-related systemd services on the host. It was just a wild guess but as soon as we stopped all VDSM services Ansible stopped complaining about not being able to reach the target host and successfully did its job. I'm sure you'd like to see more logs but I'm not certain what exactly is relevant. There are a ton of logs as this deployment is comprised of nearly 80 hosts. So, I guess it's best if you just request to see specific logs, messages or configuration details and I'll cherry-pick what's relevant. We don't really understand what's going on and would appreciate any help. We tried just about anything we could think of to resolve this issue and are running out of ideas what to do next. If you have any questions just ask and I'll do my best to answer them.

2 4

Is this still an active mailing list?
by vince seavello 06 Nov '23

06 Nov '23

I am attempting to install oVirt Node 4.5.4. I could use a little help with a few setup issues. I'm wondering if this mailing list is still active. I ask because there are several links on the ovirt.org site that are not functional. If this list is still active, I'll give some of the specifics of my system and the issues I'm running into. Vince Seavello Seavello Web Design c: 425.478.9682 f: 425.337.8712 e: vseavello(a)gmail.com

1 0

Re: Extend apache.cer and websocket-proxy.cer
by LS CHENG 04 Nov '23

04 Nov '23

Hi Yes it is generated with engine-setup. How do you extend the certificate validation value in engine-setup? (I am aware that browser can have problems with long duration certificates as explained in https://techbeacon.com/security/google-apple-mozilla-enforce-1-year-max-sec… ) Thanks On Sat, Nov 4, 2023 at 6:39 PM Matej Dujava <ovirt(a)kocurkovo.cz> wrote: > Hi, > > By self signed cert, you mean managed cert generated by ovirt itself > (engine-setup)? > > I found an issue https://bugzilla.redhat.com/show_bug.cgi?id=1824103 where > it's mentioned that safari (maybe other browsers too) have problem with > long self signed CA. Of it's not affecting your clients you can change > values and regenerate cert by engine-setup. > > You can always generate SSL cert by hand (openssl or cfssl ...) and > replace it with following > https://www.ovirt.org/documentation/administration_guide/#Replacing_the_Man… > . > > > On 4 November 2023 14:18:26 CET, LS CHENG <lsc.oraes(a)gmail.com> wrote: > >> Hi again >> >> Forgot to mention that I am using self signed certificates >> >> Thank you >> >> >> >> On Sat, Nov 4, 2023 at 2:07 PM LS CHENG <lsc.oraes(a)gmail.com> wrote: >> >>> Hi all >>> >>> I am running Oracle Linux Virtualization Manager 4.4. >>> >>> The default expiration length for apache.cer and websocket-proxy.cer is >>> 1 year, is there a way to extend them to 10 years? >>> >>> Thank you >>> >>> >>>

2 2

Extend apache.cer and websocket-proxy.cer
by LS CHENG 04 Nov '23

04 Nov '23

Hi all I am running Oracle Linux Virtualization Manager 4.4. The default expiration length for apache.cer and websocket-proxy.cer is 1 year, is there a way to extend them to 10 years? Thank you

1 1

Direct LUN I/O errors with SCSI Pass-through enabled
by mgs＠ordix.de 03 Nov '23

03 Nov '23

Hi, in our environment (Version 4.4.10.7) we use fibre channel LUNs, which we attach directly to the VMs (as Direct LUN) with VirtIO-SCSI and SCSI pass-through enabled. The virtual machines run an application that requires 4096 as physical_block_size and 512 as logical_block_size. For this reason, we had to enable SCSI pass-through. Only with SCSI pass-through the correct physical_block_size is passed through to the VM. Now we have the following problem on just about every VM: Error messages of the following form occur in the VMs (in /var/log/messages): kernel: blk_update_request: I/O error, dev sdd, sector 352194592 op 0x1:(WRITE) flags 0xc800 phys_seg 16 prio class 0 This error message coincides with a crash of the application. The error message seems to belong to SCSI. We are currently trying to find an alternative to SCSI pass-through. We want to use VirtIO and somehow pass the physical_block_size. Since the XML files of the VMs are transient, we cannot make any changes there. Does anyone have an idea what the error could be or how to pass the correct physical_block_size? Could VDSM hooks help with this? Thank you and regards Miguel

2 1

Unable to access Ovirt-4.5 engine and adding node4.5
by ankit＠eurus.net 03 Nov '23

03 Nov '23

Hi Saviour's, I am a very newbie and trying to install oVirt 4.5 on RHEL 8.7 and Node 4.5 and after succeeding will go in production. 1. Unable to access oVirt 4.5 if installed Keylock. 2. Unable to add Host when installed Keylock. setup details: VMware ovirt engine: 4GB RAM,4CPU 100 GB Node1: 4GB RAM,4CPU 100 GB Installation source: https://www.ovirt.org/documentation/installing_ovirt_as_a_standalone_manage… Let me know if you need more information about this. Could someone help me with this?

1 0

Affinity Labels in 4.4
by Alan G 02 Nov '23

02 Nov '23

Can anyone explain how affinity labels work in 4.4? I created a label containing a host and a VM. I had assumed that would require the VM to run on that host, but the VM continues to run on any host in the cluster. I then checked the 4.4 documentation and it says that I need the filters module section of scheduling policy to contain Label, but there's doesn't appear to be a filter called Label. Am I missing something?

1 0

Failed to login: PKIX path validation failed: java.security.cert.CertPathValidatorException: validity check failed
by p.olivera＠telfy.com 02 Nov '23

02 Nov '23

Hi community, We're encountering the following error when attempting to log in: Warning alert: PKIX path validation failed: java.security.cert.CertPathValidatorException: validity check failed The certificate is valid until 2027: [root@engine9 certs]# openssl x509 -subject -noout -dates -in engine.cer subject=C = US, O = telfy.com, CN = engine9.telfy.com notBefore=Sep 25 10:18:03 2022 GMT notAfter=Sep 27 10:18:03 2027 GMT It's worth noting that our time zone recently switched to GMT+1. Could this change be related to the issue? Has anyone else experienced this problem, and if so, how was it resolved? Thank you.

2 3

cannot reinstall hosts after moving self hosted engine to standalone VM and renaming ovirt UI FQDN
by vishal.merrit＠gmail.com 01 Nov '23

01 Nov '23

Getting error in engine.log on the engine VM: 2023-10-31 12:11:12,818Z ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsCommand] (default task-44) [9deb07c5-f87a-42fb-9c07-33f4d30b197d] Error during ValidateFailure.: java.lang.NullPointerException

1 0

Migrated VM has snapshots with same id
by mihailmataras＠gmail.com 31 Oct '23

31 Oct '23

Hi community, We've encountered problem with virtual machines migrated from RHV(4.4.9.5-0.1.el8ev) to oVirt (4.5.4-1.el8) using data domain. When we create snapshot on migrated VM (in oVirt), we see that snapshot has same id as "Active VM" snapshot and disk in illegal status. (we see that in web ui). Meanwhile in database "engine" id's are different. And vdsm-tool shows that there's only one snapshot in status "LEGAL". engine=# select image_guid,parentid,imagestatus,vm_snapshot_id,volume_type,volume_format,active from images where image_group_id='12a8999f-3f6e-4377-8378-40370aa68d3f'; image_guid | parentid | imagestatus | vm_snapshot_id | volume_type | volume_format | active --------------------------------------+--------------------------------------+-------------+--------------------------------------+-------------+---------------+-------- 5cf5a41d-7236-4c41-ae9c-7c6359210db6 | 6d9cc470-d66f-4e68-a0aa-6e8985f392b0 | 1 | 88d91f15-26ad-48c1-91ec-422c1c04e79b | 2 | 4 | t 6d9cc470-d66f-4e68-a0aa-6e8985f392b0 | 00000000-0000-0000-0000-000000000000 | 4 | a47261da-4ebb-42e3-a74a-0882f8e27c73 | 2 | 4 | f (2 rows) vdsm-tool dump-volume-chains 5e88e116-fb90-41ce-b9c3-01ccb9302b16 | grep 12a8999f-3f6e-4377-8378-40370aa68d3f -A 10 image: 12a8999f-3f6e-4377-8378-40370aa68d3f - 6d9cc470-d66f-4e68-a0aa-6e8985f392b0 status: OK, voltype: LEAF, format: COW, legality: LEGAL, type: SPARSE, capacity: 214748364800, truesize: 121198608384 We know how to fix this using database commands. But when we create snapshot , it happens again. Question is how to prevent that? Thank you.

1 0

Re: Failed to synchronize networks of Provider ovirt-provider-ovn
by Mail SET Inc. Group 27 Oct '23

27 Oct '23

Yes, i use same manual to change WebUI SSL. ovirt-ca-file= is a same SSL file which use WebUI. Yes, i restart ovirt-provider-ovn, i restart engine, i restart all what i can restart. Nothing... > 12 сент. 2018 г., в 16:11, Dominik Holler <dholler(a)redhat.com> написал(а): > > On Wed, 12 Sep 2018 14:23:54 +0300 > "Mail SET Inc. Group" <mail(a)set-pro.net> wrote: > >> Ok! > > Not exactly, please use users(a)ovirt.org for such questions. > Other should benefit from this questions, too. > Please write the next mail to users(a)ovirt.org and keep me in CC. > >> What i did: >> >> 1) install oVirt «from box» (4.2.5.2-1.el7); >> 2) generate own ssl for my engine using my FreeIPA CA, Install it and > > What means "Install it"? You can use the doc from the following link > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/ht… > > Ensure that ovirt-ca-file= in > /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf > points to the correct file and ovirt-provider-ovn is restarted. > >> get tis issue; >> >> >> [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log >> 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED] >> certificate verify failed (_ssl.c:579) Traceback (most recent call >> last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", >> line 133, in _handle_request method, path_parts, content >> File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", >> line 175, in handle_request return >> self.call_response_handler(handler, content, parameters) File >> "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in >> call_response_handler return response_handler(content, parameters) >> File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", >> line 62, in post_tokens user_password=user_password) File >> "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in >> create_token return auth.core.plugin.create_token(user_at_domain, >> user_password) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line >> 48, in create_token timeout=self._timeout()) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75, >> in create_token username, password, engine_url, ca_file, timeout) >> File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line >> 91, in _get_sso_token timeout=timeout File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54, >> in wrapper response = func(*args, **kwargs) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47, >> in wrapper raise BadGateway(e) BadGateway: [SSL: >> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579) >> >> >> [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log >> 2018-09-12 14:10:23,773+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock >> Acquired to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] >> Running command: SyncNetworkProviderCommand internal: true. >> 2018-09-12 14:10:23,836+03 ERROR >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] >> Command >> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:10:23,837+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock >> freed to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO >> [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default >> task-6) [] User admin@internal successfully logged in with scopes: >> ovirt-app-admin ovirt-app-api ovirt-app-portal >> ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all >> ovirt-ext=token-info:authz-search >> ovirt-ext=token-info:public-authz-search >> ovirt-ext=token-info:validate ovirt-ext=token:password-access >> 2018-09-12 14:14:12,587+03 INFO >> [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default >> task-6) [1bf1b763] Running command: CreateUserSessionCommand >> internal: false. 2018-09-12 14:14:12,628+03 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User >> admin@internal-authz connecting from '10.0.3.61' using session >> 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg==' >> logged in. 2018-09-12 14:14:30,972+03 INFO >> [org.ovirt.engine.core.bll.provider.ImportProviderCertificateCommand] >> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] Running >> command: ImportProviderCertificateCommand internal: false. Entities >> affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: >> SystemAction group CREATE_STORAGE_POOL with role type ADMIN >> 2018-09-12 14:14:30,982+03 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] EVENT_ID: >> PROVIDER_CERTIFICATE_IMPORTED(213), Certificate for provider >> ovirt-provider-ovn was imported. (User: admin@internal-authz) >> 2018-09-12 14:14:31,006+03 INFO >> [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] >> (default task-6) [a48d94ab-b0b2-42a2-a667-0525b4c652ea] Running >> command: TestProviderConnectivityCommand internal: false. Entities >> affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: >> SystemAction group CREATE_STORAGE_POOL with role type ADMIN >> 2018-09-12 14:14:31,058+03 ERROR >> [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] >> (default task-6) [a48d94ab-b0b2-42a2-a667-0525b4c652ea] Command >> 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'default' is using 0 threads out of 1, 5 threads waiting for >> tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engine' is using 0 threads out of 500, 16 threads waiting for >> tasks and 0 tasks in queue. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engineScheduled' is using 0 threads out of 100, 100 threads >> waiting for tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engineThreadMonitoring' is using 1 threads out of 1, 0 threads >> waiting for tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'hostUpdatesChecker' is using 0 threads out of 5, 2 threads >> waiting for tasks. 2018-09-12 14:15:23,843+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] Lock >> Acquired to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:15:23,849+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] >> Running command: SyncNetworkProviderCommand internal: true. >> 2018-09-12 14:15:23,900+03 ERROR >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] >> Command >> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:15:23,901+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] Lock >> freed to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' >> >> >> [root@engine ~]# >> cat /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf # >> This file is automatically generated by engine-setup. Please do not >> edit manually [OVN REMOTE] ovn-remote=ssl:127.0.0.1:6641 >> [SSL] >> https-enabled=true >> ssl-cacert-file=/etc/pki/ovirt-engine/ca.pem >> ssl-cert-file=/etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer >> ssl-key-file=/etc/pki/ovirt-engine/keys/ovirt-provider-ovn.key.nopass >> [OVIRT] >> ovirt-sso-client-secret=Ms7Gw9qNT6IkXu7oA54tDmxaZDIukABV >> ovirt-host=https://engine.set.local:443 >> ovirt-sso-client-id=ovirt-provider-ovn >> ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem >> [PROVIDER] >> provider-host=engine.set.local >> >> >>> 12 сент. 2018 г., в 13:59, Dominik Holler <dholler(a)redhat.com> >>> написал(а): >>> >>> On Wed, 12 Sep 2018 13:04:53 +0300 >>> "Mail SET Inc. Group" <mail(a)set-pro.net> wrote: >>> >>>> Hello Dominik! >>>> I have a same issue with OVN provider and SSL >>>> https://www.mail-archive.com/users@ovirt.org/msg47020.html >>>> <https://www.mail-archive.com/users@ovirt.org/msg47020.html> But >>>> certificate changes not helps to resolve it. Maybe you can help me >>>> with this? >>> >>> Sure. Can you please share the relevant lines of >>> ovirt-provider-ovn.log and engine.log, and the information if you >>> are using the certificates generated by engine-setup with >>> users(a)ovirt.org ? Thanks, >>> Dominik >>> >> > >

5 13

Unable to enable HPET component of an specific VM in oVirt 4.7
by ricardoot＠gmail.com 24 Oct '23

24 Oct '23

Hello community members, I'm currently using oVirt 4.7 as my virtualization environment, and I'm facing an issue with enabling the HPET (High Precision Event Timer) component in the XML configuration file of virtual machine (VM). Upon inspecting the XML file, I noticed that the `<timer name='hpet' present='no'/>` line is missing, indicating that the HPET component is disabled. Here are the steps I have taken so far: 1. I verified that the VM's XML configuration file does not include the `<timer name='hpet' present='yes'/>` line. 2. While the VM was powered on, I used the following command to edit the XML configuration file: ``` virsh edit VM_NAME ``` I added the `<timer name='hpet' present='yes'/>` line to the XML file. However, the changes did not persist after restarting the VM. To provide additional information, on the host where oVirt is running, the available clock sources can be viewed by executing the following command: ``` cat /sys/devices/system/clocksource/clocksource0/available_clocksource ``` The output shows the available clock sources, such as `tsc`, `hpet`, and `acpi_pm`. To resolve the authentication issue with the `virsh` command, I created a user with appropriate privileges using the following command: ``` sudo saslpasswd2 -a libvirt USERNAME ``` After creating the user, I was able to authenticate successfully with the `virsh` command using the newly created credentials. However, I'm unable to find an option to add the HPET parameter in the web console of oVirt. It seems that the option to configure HPET is not available in the web console. Has anyone else encountered a similar issue in oVirt 4.7? Could you please provide guidance or suggest a solution to enable the HPET component in the XML configuration file of a powered-off VM in oVirt 4.7? Any insights, experiences, or suggestions would be greatly appreciated. Thank you in advance for your assistance! Best regards,

2 4

Can I get a way to commit ovirt Project?
by rak kim 24 Oct '23

24 Oct '23

Hello, I have been used to OLV/RHEV product about 3 years I often visit our community to get the error solution as well now I would try to use ovirt and develop to improve some function.. I'm using test environment using compiled oVirt 4.5 package. but I havent yet set up build develpment environment 1. Can you share and advise your ovirt development environment experience? 2. ovirt has some project, and how merge it to compile one source? 3. Is there a process for sharing what features you want to fix before making improvements? Can I just do PR? 4. your tips.. how to debug, ..etc

3 2