- Users - oVirt List Archives

Re: Hosted Engine VM and Storage not showing up
by Simone Tiraboschi 23 Jan '19

23 Jan '19

On Mon, Jan 7, 2019 at 2:03 PM Vinícius Ferrão <ferrao(a)versatushpc.com.br> wrote: > Hello Simone, > > Sent from my iPhone > > On 7 Jan 2019, at 07:11, Simone Tiraboschi <stirabos(a)redhat.com> wrote: > > > > On Sun, Jan 6, 2019 at 5:31 PM <ferrao(a)versatushpc.com.br> wrote: > >> Hello, >> >> I’ve a new oVirt installation using oVirt 4.2.7.1 Node and after >> deploying the hosted engine it does not show up on the interface even after >> adding the first storage. >> >> The Datacenter is up but the engine VM and the engine storage does not >> appear. >> >> I have the following message repeated constantly on /var/log/messages: >> >> Jan 4 20:17:30 ovirt1 journal: ovirt-ha-agent >> ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config.vm ERROR >> Unable to identify the OVF_STORE volume, falling back to initial vm.conf. >> Please ensure you already added your first data domain for regular VMs >> >> What’s wrong? Am I doing something different? >> > > The import of external VM is broken in 4.2.7 as for > https://bugzilla.redhat.com/show_bug.cgi?id=1649615 > It will be fixed with 4.2.8. > > In the mean time I strongly suggest to use the regular flow for > hosted-engine deployment (simply skip --noansible option) since only the > vintage deprecated flow is affected by this issue. > > > > Thanks for pointing the issue. I was unable the find this on bugzilla by > myself. The title isn’t helping either. > > But on other hand, I only used the legacy mode because ansible mode fails. > Can you please attach a log of the issue? > > I’m not sure why it fails. I can try it again, but I can ask in advance: > the management network is bonded, is this an issue? I think I’ve read > something about this on this list but I’m unsure. > No, but you should set bond mode 1, 2, 3, or 4. Teaming is not supported. > > Thanks, > > >> >> Additional infos: >> >> [root@ovirt1 ~]# vdsm-tool list-nets >> ovirtmgmt (default route) >> storage >> >> [root@ovirt1 ~]# ip a | grep "inet " >> inet 127.0.0.1/8 scope host lo >> inet 10.20.0.101/24 brd 10.20.0.255 scope global dynamic ovirtmgmt >> inet 192.168.10.1/29 brd 192.168.10.7 scope global storage >> >> [root@ovirt1 ~]# mount | grep -i nfs >> sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) >> 10.20.0.200:/mnt/pool0/ovirt/he on /rhev/data-center/mnt/10.20.0.200:_mnt_pool0_ovirt_he >> type nfs4 >> (rw,relatime,vers=4.1,rsize=131072,wsize=131072,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=10.20.0.101,local_lock=none,addr=10.20.0.200) >> >> [root@ovirt1 ~]# hosted-engine --check-deployed >> Returns nothing! >> >> [root@ovirt1 ~]# hosted-engine --check-liveliness >> Hosted Engine is up! >> >> [root@ovirt1 ~]# hosted-engine --vm-status >> >> --== Host 1 status ==-- >> >> conf_on_shared_storage : True >> Status up-to-date : True >> Hostname : ovirt1.local.versatushpc.com.br >> Host ID : 1 >> Engine status : {"health": "good", "vm": "up", >> "detail": "Up"} >> Score : 3400 >> stopped : False >> Local maintenance : False >> crc32 : 1736a87d >> local_conf_timestamp : 7836 >> Host timestamp : 7836 >> Extra metadata (valid at timestamp): >> metadata_parse_version=1 >> metadata_feature_version=1 >> timestamp=7836 (Fri Jan 4 20:18:10 2019) >> host-id=1 >> score=3400 >> vm_conf_refresh_time=7836 (Fri Jan 4 20:18:10 2019) >> conf_on_shared_storage=True >> maintenance=False >> state=EngineUp >> stopped=False >> >> >> Thanks in advance, >> >> PS: Log files are available here: >> http://www.if.ufrj.br/~ferrao/ovirt/issues/he-not-showing/ >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/IQHM6YQ7HVBHL… >> > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BPJAV4AVRN55Y… > >

2 9

Migrating Hosted Engine environment from untagged to LACP bonded interfaces with tagged ovirtmgmt network
by Bernhard Dick 23 Jan '19

23 Jan '19

Hi, I have an oVirt 4.2 environment running with the engine in hosted engine state. We are now going to change our whole setup migrating to redundancy on switch side and using a different VLAN for the ovirt management traffic. Currently all host and management-traffic is running untagged on one network interface on all of our hosts and we want to change this to be VLAN-tagged inside LACP-Bonds (each bond containing two network interfaces) on all hosts. While changing the configuration for the VM networks should be straight forward as I can shutdown all VMs during the migration I'm asking how to handle this for the hosted engine VM and configuration. Is there any information how to do such a change? Regards Bernhard

1 0

Adding host with local-storage VMs configured
by Callum Smith 23 Jan '19

23 Jan '19

Dear All, We’re in a world where we had to recover from outage by installing a clean hosted engine and importing VMs from storage. We do, however, have a host that is configured for local-storage and has a VM running on it. What is the best way to re-introduce this host to a new hosted-engine with minimal outage of the VM on that host. Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

1 0

Q: "virsh list" on oVirt node
by Andrei Verovski 23 Jan '19

23 Jan '19

Hi ! “virsh” can’t be executed on oVirt node directly due to authentication problem. Only "virsh —readonly” are working. Someone have recommended adding new password with this: saslpasswd2 -a libvirt username I know this is somewhat depreciated to hacking directly into oVirt node yet I’m still need this. What is correct, non-destructive to accomplish this? Thanks in advance. Andrei

1 0

Re: The built in group Everyone is troublesome.
by Jacob Green 22 Jan '19

22 Jan '19

Thank you for your help! This worked flawlessly and helped me understand the engine database a little more! On 12/04/2018 12:00 PM, Staniforth, Paul wrote: > > Get the id for the everyone group > https://engine.example.com/ovirt-engine/api/groups?search=everyone > > Get the id for the UserRole > https://engine.example.com/ovirt-engine/api/roles > > connect to the engine database > > e.g. > > psql -h localhost -U engine -d engine > > select * from permissions where ad_element_id='groupid'; > > note the id of the permission, probably the last one but you can check > by the role_id > then delete the permission. > > delete from permissions where id='noted before'; > > you should make a backup of your system before you do this. > > > Regards, > > Paul S. > > ------------------------------------------------------------------------ > *From:* Staniforth, Paul > *Sent:* 04 December 2018 17:23 > *To:* Jacob Green > *Subject:* Re: [ovirt-users] The built in group Everyone is troublesome. > > Yes, that's not good you need to remove the UserRole system permission > but they fixed it so you can't. > > https://bugzilla.redhat.com/show_bug.cgi?id=1366205 > > > I think there maybe a bug that allows you to add system permissions to > the everyone group in 4.2, you're only supposed to be able to change > the permissions with a dbscript. > > > I'll look up my notes on how to remove the permission from the DB. > > > Regards, > > Paul S. > > > ------------------------------------------------------------------------ > *From:* Jacob Green <jgreen(a)aasteel.com> > *Sent:* 04 December 2018 16:59 > *To:* Staniforth, Paul > *Subject:* Re: [ovirt-users] The built in group Everyone is troublesome. > > > If the picture does not come through. The following are the permisstions > > Group > Everyone > > Everyone > Role - UserRole,UserProfileEditor Object : (System) > > > On 12/04/2018 10:20 AM, Staniforth, Paul wrote: >> What are the permissions for the group everyone, in particular the system permission should be just UserProfileEditor. >> >> Regards, >> Paul S. >> ________________________________________ >> From: Jacob Green<jgreen(a)aasteel.com> >> Sent: 04 December 2018 15:20 >> To: users >> Subject: [ovirt-users] The built in group Everyone is troublesome. >> >> So all my VMs are inheriting system permissions from group >> everyone and giving all my users access to all my VMs, in ovirt 4.2. Is >> there a best practices guide or any recommendation on how to clear this >> up? Clicking remove on everyone does not work because Ovirt won't allow >> me to remove a built in account. >> >> >> Thank you >> >> -- >> Jacob Green >> >> Systems Admin >> >> American Alloy Steel >> >> 713-300-5690 >> _______________________________________________ >> Users mailing list --users(a)ovirt.org >> To unsubscribe send an email tousers-leave(a)ovirt.org >> Privacy Statement:https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ >> List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/A5MW… >> To view the terms under which this email is distributed, please go to:- >> http://leedsbeckett.ac.uk/disclaimer/email/ > > -- > Jacob Green > > Systems Admin > > American Alloy Steel > > 713-300-5690 > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ -- Jacob Green Systems Admin American Alloy Steel 713-300-5690

3 2

oVirt 4.2.7 export VM seems stuck at end of sparse disk
by Gianluca Cecchi 22 Jan '19

22 Jan '19

Hello, it happened two times, always with VMs composed by more than 1 disk. Now I have a VM with 9 disks and a total of about 370Gb: 1 x 90Gb 5 x 50Gb 3 x 10Gb I export vm to an export domain and it started 2 hours and 10 minutes ago at 15:46. At beginning the write rate on export domain was 120MB/s (in line with I/O capabilities of storage subsystem). It seems 5 disks completed ok, while 4 don't complete, even if it seems to be some reading activity: with command iotop -d 3 -k -o -P I get this on hypervisor where qemu-img convert command is executing Total DISK READ : 5712.75 K/s | Total DISK WRITE : 746.58 K/s Actual DISK READ: 6537.11 K/s | Actual DISK WRITE: 6.89 K/s PID PRIO USER DISK READ> DISK WRITE SWAPIN IO COMMAND 21238 idle vdsm 1344.18 K/s 183.12 K/s 0.00 % 0.15 % qemu-img convert -p -t non~1d23-4829-8350-f81fa16ea8b0 21454 idle vdsm 1344.18 K/s 183.12 K/s 0.00 % 0.06 % qemu-img convert -p -t non~443d-4563-8879-3dbd711b6936 21455 idle vdsm 1344.18 K/s 189.68 K/s 0.00 % 0.08 % qemu-img convert -p -t non~b67d-4acd-9bb5-485bc3ffdf2e 21548 idle vdsm 1344.18 K/s 190.67 K/s 0.00 % 0.06 % qemu-img convert -p -t non~7fc On export share [root@xfer ~]# ll -td /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/* drwxr-xr-x 2 36 36 4096 Jan 21 17:21 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/ac33a8fe-f10e-4cbb-b121-2956f9925ade drwxr-xr-x 2 36 36 4096 Jan 21 17:06 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/20c07082-d5ed-4804-867d-1f3f7c202b0e drwxr-xr-x 2 36 36 4096 Jan 21 17:02 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/f8b1c6bc-de13-4416-9fe6-d7c26fb082b1 drwxr-xr-x 2 36 36 4096 Jan 21 17:02 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/1b5313ef-0ee5-4f9a-b2a6-baa153ff0984 drwxr-xr-x 2 36 36 4096 Jan 21 17:02 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/3f21c566-bc00-4dab-acbb-db9a3a1d76fa drwxr-xr-x 2 36 36 4096 Jan 21 15:47 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/ed3a721e-fd1b-4fea-ad41-7ca56e94890e drwxr-xr-x 2 36 36 4096 Jan 21 15:46 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/213f9ce9-6c34-4911-820e-4d1a96ba1791 drwxr-xr-x 2 36 36 4096 Jan 21 15:46 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/28fef57c-4254-4469-9f3f-0d1f114d4f78 drwxr-xr-x 2 36 36 4096 Jan 21 15:46 /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/ea4fa5b1-a93a-4cb9-9552-e8ec67c5ff75 [root@xfer ~]# du -sh /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/* 11G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/1b5313ef-0ee5-4f9a-b2a6-baa153ff0984 51G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/20c07082-d5ed-4804-867d-1f3f7c202b0e 51G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/213f9ce9-6c34-4911-820e-4d1a96ba1791 51G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/28fef57c-4254-4469-9f3f-0d1f114d4f78 11G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/3f21c566-bc00-4dab-acbb-db9a3a1d76fa 85G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/ac33a8fe-f10e-4cbb-b121-2956f9925ade 51G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/ea4fa5b1-a93a-4cb9-9552-e8ec67c5ff75 51G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/ed3a721e-fd1b-4fea-ad41-7ca56e94890e 11G /export/ovirt/a6a289ea-f160-4d35-b3aa-e59d171b4633/images/f8b1c6bc-de13-4416-9fe6-d7c26fb082b1 [root@xfer ~]# It seems more than 30 minutes no more progress.... I see no errors in vdsm.log of hypervisor and in engine.log I keep this message every 10 seconds: 2019-01-21 18:08:19,060+01 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [a1c0e39f-1924-4ae8-8b48-30bcce669278] Command 'ExportVm' (id: 'dc0a58bd-e8ca-42a9-8de0-dd3ccabe0512') waiting on child command id: '29d40db8-a0b9-4408-9e62-1abf3bccca65' type:'CopyImageGroup' to complete All the disks except the "apparently" not completed one (the 90Gb disk) are preallocated. Any other hint on what to check? Thanks, Gianluca

1 1

How to connect 2 hosts
by adamantini.peratikou＠ouc.ac.cy 22 Jan '19

22 Jan '19

I have the following configuraton: 1 cluster, 2 Hosts I would like to use a Vm-router under Host 1 to act as a dhcp server for both HOST1 and HOST2 VMs is it possible?

4 7

User Management
by Sakhi Hadebe 22 Jan '19

22 Jan '19

Hi, I need some pointers to documentation that will help me to configure users to have access and some rights (access to console, starting and shutting down own VMs) on their VMs on the VM portal. I have created a user using the ovirt-aaa-jdbc-tool utility, but I am unable to login to the cockpit portal. It gives an error: *The user shadebe@internal is not **authorized** to perform login* User details: [root@hostedengine ~]# ovirt-aaa-jdbc-tool query --what=user --pattern="name=s*" -- User shadebe(a35e8e14-d32b-4ff9-89e0-fd090a87146a) -- Namespace: * Name: shadebe ID: a35e8e14-d32b-4ff9-89e0-fd090a87146a Display Name: Email: sakhi(a)sanren.ac.za First Name: Sakhi Last Name: Hadebe Department: Title: Description: Account Disabled: false Account Locked: false Account Unlocked At: 1970-01-01 00:00:00Z Account Valid From: 2019-01-16 09:08:48Z Account Valid To: 2219-01-16 09:08:48Z Account Without Password: false Last successful Login At: 2019-01-16 09:32:52Z Last unsuccessful Login At: 2019-01-16 09:32:36Z Password Valid To: 2029-01-16 10:30:00Z Please help. -- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za>

2 2

[ANN] oVirt 4.2.8 is now generally available
by Sandro Bonazzola 22 Jan '19

22 Jan '19

The oVirt Project is pleased to announce the general availability of oVirt 4.2.8, as of January 22nd, 2019. This update is the eighth and last in a series of stabilization updates to the 4.2 series. Please note that no further updates will be issued for the 4.2 series. We encourage users to upgrade to 4.3 series when generally available to receive new features and updates. This release is available now for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node update is available, ISO will be available soon [2] - oVirt Tools Setup ISO is available[2] oVirt Node has been updated including: - oVirt 4.2.8: http://www.ovirt.org/release/4.2.8/ - Release for CentOS Linux 7 (1810) ( https://lists.centos.org/pipermail/centos-announce/2018-December/023082.html ) - Ansible 2.7.5: https://github.com/ansible/ansible/blob/stable-2.7/changelogs/CHANGELOG-v2.… Relevant CentOS Errata included: - CEBA-2019:0037 CentOS 7 tzdata BugFix Update ( https://lists.centos.org/pipermail/centos-announce/2019-January/023142.html ) - CESA-2019:0049 Important CentOS 7 systemd Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-January/023143.html ) - CESA-2018:3651 Moderate CentOS 7 kernel Security Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023132.html ) - CEBA-2018:3338 CentOS 7 sos BugFix Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023125.html ) - CEBA-2018:3664 CentOS 7 selinux-policy BugFix Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023124.html ) - CESA-2018:3738 Important CentOS 7 ruby Security Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023122.html ) - CESA-2018:3347 Critical CentOS 7 python-paramiko Security Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023119.html ) - CESA-2018:3665 Important CentOS 7 NetworkManager Security Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023116.html ) - CEBA-2018:3442 CentOS 7 lvm2 BugFix Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023112.html ) - CEBA-2018:3669 CentOS 7 libvirt BugFix Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023110.html ) - CEBA-2018:3659 CentOS 7 libguestfs BugFix Update ( https://lists.centos.org/pipermail/centos-announce/2018-December/023108.html ) Additional Resources: * Read more about the oVirt 4.2.8 release highlights: http://www.ovirt.org/release/4.2.8/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.8/ [2] http://resources.ovirt.org/pub/ovirt-4.2/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Unable to start or create a virtual machine
by Shikhar Verma 22 Jan '19

22 Jan '19

Hi, I have created the virtual machine from ovirt manager but when I am trying to get the console of the vm to do the installation of it but it is only giving two two line and even i have tried as run once and selected CD ROM as first priority and attached the ISO of centos7 SeaBIOS (version 1.11.0-2.e17) Machine UUID ------- Also, from manager, newly launched vm is showing green.. And from the host machine, it is showing this error Jan 21 19:23:24 servera libvirtd: 2019-01-21 13:53:24.286+0000: 12800: error : qemuDomainAgentAvailable:9133 : Guest agent is not responding: QEMU guest agent is not connected I am using the latest version version of ovirt-engine & host as well. Setup I have create on my Laptop using vmware workstation: Centos server : Manager : server.example.com (192.168.28.128) Centos : Host : servera.example.com 192.168.28.130 Centos : NFS Server : utility.example.com 192.168.28.129 (create fs's as /exports and exported as /exports/iso & /exports/data1 ) In /exports/iso ==> I have rhel 7 & centos 7 iso images and /exports/data1 ( will be using for disk images of vms) From Manager : I have added host and also create domains one as datadomain (/exports/data1) and another one is isodomain (/exports/iso) Now issue i am facing when I am trying to create a vm, it is allowing me to create vm but console is blank.

1 0

Vdo based storage domain
by Leo David 22 Jan '19

22 Jan '19

Hi everyone, I have read and tried to understand how vdo works, and it seems pretty impressive, but i feel like i am missing something. At the end of the day, my question is: Can I entirelly rely on the 10 times increased usable space ? As and example, I have created a 4.8tb volume based on 3x480gb samsung sm863a enterprise ssd devices. (full replica 3). Should I be confident that I can use 4.8tb for my storage domain (vms data store) without concerning about data repetabilitty in the future ? I am just trying to think as an end-user consumer that cannot predict if data that will be written to the device will be compresable or not, and only see 4.8tb as trully usable space. Any thoughts, any experience to share ? Im sorry if my question sounds noob, but i'm just trying to get under end user's hat. Thank you very much, Have a good day ! Leo

1 0

failed to attach a samba active directory
by adam_xu＠adagene.com.cn 22 Jan '19

22 Jan '19

Hello ovirt developers. I have attached a samba ad dc successfully more then 10 times before via this link https://www.ovirt.org/documentation/admin-guide/chap-Users_and_Roles.html but this time, when I try to attach a samba ad dc, I got some certificate error. my test engine version: 4.2.7 or 4.2.8 (both have been tested) full procedure like below: # ovirt-engine-extension-aaa-ldap-setup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-extension-aaa-ldap-setup.conf.d/10-packaging.conf'] Log file: /tmp/ovirt-engine-extension-aaa-ldap-setup-20190122102450-0b1sjq.log Version: otopi-1.7.8 (otopi-1.7.8-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization Welcome to LDAP extension configuration program Available LDAP implementations: 1 - 389ds 2 - 389ds RFC-2307 Schema 3 - Active Directory 4 - IBM Security Directory Server 5 - IBM Security Directory Server RFC-2307 Schema 6 - IPA 7 - Novell eDirectory RFC-2307 Schema 8 - OpenLDAP RFC-2307 Schema 9 - OpenLDAP Standard Schema 10 - Oracle Unified Directory RFC-2307 Schema 11 - RFC-2307 Schema (Generic) 12 - RHDS 13 - RHDS RFC-2307 Schema 14 - iPlanet Please select: 3 Please enter Active Directory Forest name: ntbaobei.com [ INFO ] Resolving Global Catalog SRV record for ntbaobei.com NOTE: It is highly recommended to use secure protocol to access the LDAP server. Protocol startTLS is the standard recommended method to do so. Only in cases in which the startTLS is not supported, fallback to non standard ldaps protocol. Use plain for test environments only. Please select protocol to use (startTLS, ldaps, plain) [startTLS]: Please select method to obtain PEM encoded CA certificate (File, URL, Inline, System, Insecure): File File path: /etc/pki/ca-trust/extracted/pem/ca.pem [ INFO ] Resolving SRV record 'ntbaobei.com' [ INFO ] Connecting to LDAP using 'ldap://dc1.ntbaobei.com:389' [ INFO ] Executing startTLS [ INFO ] Connection succeeded Enter search user DN (for example uid=username,dc=example,dc=com or leave empty for anonymous): vmail(a)ntbaobei.com Enter search user password: [ INFO ] Attempting to bind using 'vmail(a)ntbaobei.com' Are you going to use Single Sign-On for Virtual Machines (Yes, No) [Yes]: NOTE: Profile name has to match domain name, otherwise Single Sign-On for Virtual Machines will not work. Please specify profile name that will be visible to users [ntbaobei.com] [ INFO ] Stage: Setup validation NOTE: It is highly recommended to test drive the configuration before applying it into engine. Login sequence is executed automatically, but it is recommended to also execute Search sequence manually after successful Login sequence. Please provide credentials to test login flow: Enter user name: xingya_xu Enter user password: [ INFO ] Executing login sequence... Login output: 2019-01-22 10:26:06,777+08 INFO ======================================================================== 2019-01-22 10:26:06,800+08 INFO ============================ Initialization ============================ 2019-01-22 10:26:06,801+08 INFO ======================================================================== 2019-01-22 10:26:06,841+08 INFO Loading extension 'ntbaobei.com-authn' 2019-01-22 10:26:06,911+08 INFO Extension 'ntbaobei.com-authn' loaded 2019-01-22 10:26:06,917+08 INFO Loading extension 'ntbaobei.com' 2019-01-22 10:26:06,953+08 INFO Extension 'ntbaobei.com' loaded 2019-01-22 10:26:06,954+08 INFO Initializing extension 'ntbaobei.com-authn' 2019-01-22 10:26:06,960+08 INFO [ovirt-engine-extension-aaa-ldap.authn::ntbaobei.com-authn] Creating LDAP pool 'authz' 2019-01-22 10:26:07,324+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 2019-01-22 10:26:07,325+08 INFO [ovirt-engine-extension-aaa-ldap.authn::ntbaobei.com-authn] Creating LDAP pool 'authn' 2019-01-22 10:26:08,748+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 2019-01-22 10:26:08,773+08 WARNING Ignoring records from pool: 'authz' 2019-01-22 10:26:08,774+08 WARNING Ignoring records from pool: 'authz' 2019-01-22 10:26:08,775+08 INFO Extension 'ntbaobei.com-authn' initialized 2019-01-22 10:26:08,776+08 INFO Initializing extension 'ntbaobei.com' 2019-01-22 10:26:08,776+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Creating LDAP pool 'authz' 2019-01-22 10:26:09,414+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] LDAP pool 'authz' information: vendor='Samba Team (https://www.samba.org)' version='4.8.8-SerNet-RedHat-18.el7' 2019-01-22 10:26:09,415+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Creating LDAP pool 'gc' 2019-01-22 10:26:10,148+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 2019-01-22 10:26:10,179+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Creating LDAP pool 'authz(a)ntbaobei.com' 2019-01-22 10:26:10,269+08 WARNING Exception: The connection reader was unable to successfully complete TLS negotiation: SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), ldapSDKVersion=4.0.5, revision=b28fb50058dfe2864171df2448ad2ad2b4c2ad58 2019-01-22 10:26:10,270+08 WARNING Ignoring records from pool: 'authz(a)ntbaobei.com' 2019-01-22 10:26:10,282+08 WARNING Ignoring records from pool: 'authz(a)ntbaobei.com' 2019-01-22 10:26:10,283+08 INFO [ovirt-engine-extension-aaa-ldap.authz::ntbaobei.com] Available Namespaces: [] 2019-01-22 10:26:10,283+08 INFO Extension 'ntbaobei.com' initialized 2019-01-22 10:26:10,284+08 INFO Start of enabled extensions list 2019-01-22 10:26:10,284+08 INFO Instance name: 'ntbaobei.com', Extension name: 'ovirt-engine-extension-aaa-ldap.authz', Version: '1.3.8', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.3.8-1.el7', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/tmp/tmp01ChKj/extensions.d/ntbaobei.com.properties', Initialized: 'true' 2019-01-22 10:26:10,285+08 INFO Instance name: 'ntbaobei.com-authn', Extension name: 'ovirt-engine-extension-aaa-ldap.authn', Version: '1.3.8', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.3.8-1.el7', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/tmp/tmp01ChKj/extensions.d/ntbaobei.com-authn.properties', Initialized: 'true' 2019-01-22 10:26:10,285+08 INFO End of enabled extensions list 2019-01-22 10:26:10,285+08 INFO ======================================================================== 2019-01-22 10:26:10,285+08 INFO ============================== Execution =============================== 2019-01-22 10:26:10,286+08 INFO ======================================================================== 2019-01-22 10:26:10,286+08 INFO Iteration: 0 2019-01-22 10:26:10,287+08 INFO Profile='ntbaobei.com' authn='ntbaobei.com-authn' authz='ntbaobei.com' mapping='null' 2019-01-22 10:26:10,287+08 INFO API: -->Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='ntbaobei.com' user='testusernamehere' 2019-01-22 10:26:10,290+08 INFO API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='ntbaobei.com' result=GENERAL_ERROR 2019-01-22 10:26:10,296+08 SEVERE Authn.Result code is: GENERAL_ERROR [ ERROR ] Login sequence failed Please investigate details of the failure (search for lines containing SEVERE log level). Select test sequence to execute (Done, Abort, Login, Search) [Abort]: [ ERROR ] Failed to execute stage 'Setup validation': Aborted by user [ INFO ] Stage: Clean up Log file is available at /tmp/ovirt-engine-extension-aaa-ldap-setup-20190122102450-0b1sjq.log: [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination I have copy the CA certificate file from samba ad dc to /etc/pki/ca-trust/extracted/pem/ca.pem in the engine server. I think the warning "SSLHandshakeException(sun.security.validator.ValidatorException: No trusted certificate found), " is the reason why I can not pass user login test? I once passed the user login test in some older version such as 4.2.6. I can still pass the user login test using startTLS Insecure way. full log has been attached to this mail. thanks. yours Adam

1 0

Re: oVirt Node install - kickstart postintall
by Ryan Barry 21 Jan '19

21 Jan '19

The quick answer is that operations in %post must be performed before 'nodectl init'. If that's done, they'll happily stick. On Mon, Jan 14, 2019, 9:29 PM Brad Riemann <Brad.Riemann(a)cloud5.com wrote: > Can you send over the whole %post segment i via pastebin? I think i've run > across something similar that i addressed, but just want to be sure. > > > Brad Riemann > Sr. System Architect > Cloud5 Communications > > ------------------------------ > *From:* jeanbaptiste(a)nfrance.com <jeanbaptiste(a)nfrance.com> > *Sent:* Friday, January 11, 2019 1:51:14 AM > *To:* users(a)ovirt.org > *Subject:* [ovirt-users] oVirt Node install - kickstart postintall > > CAUTION: This email originated from outside of CLOUD5. Do not click links > or open attachments unless you recognize the sender and know the content is > safe. > > > Hello everybody, > > Since days, I'm trying to install oVirt (via Foreman) in network mode > (TFTP net install). > All is great, but I want to make some actions in postinstall (%post). > Some actions are relatated to /etc/sysconfig/network-interfaces and > another action is related to root authorized_keys. > > When I try to add pub-key to a created authorized_keys for root, I work > (verified into anaconda. > But after installation and anaconda reboot, I've noticed all my %post > actions in /(root) are discared. After reboot, there is nothing in > /root/.ssh for example. > Whereas, in /etc, all my modications are preserved. > > I thought to a Selinux relative issue, but It is not relative to Selinux > > I miss something. Please can you help to understand how oVirt install / > partition work ? > > thanks for all > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BCQEKHCPSFDEF… > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TGT7K3N245SH3… >

2 1

multiple engines (active passive)
by maoz zadok 21 Jan '19

21 Jan '19

Hello users, After a painful experience with a crashed engine and a problematic recovery from a backup, I was thinking to create one more engine in standby mode in the same network, that will automatically recover backup files from the active engine on a daily/hourly basis. This way I'll run recovery tests every day automatically and easily switch in case of engine failure with a DNS record change to the passive engine. So the main question, is it harmful to have more then one engine alive if only one is been modified? can the standby engine affect the host nodes?

9 10

Re: GlusterFS and oVirt
by Strahil 21 Jan '19

21 Jan '19

1 0

How to import from another oVirt / RHV environment
by Gianluca Cecchi 20 Jan '19

20 Jan '19

Hello, I have two different oVirt 4.2 environments and I want to migrate some big VMs from one to another. I'm not able to detach and attach the block based domain where are the disks of source. And I cannot use export domain functionality. But the 2 environments, both hosts and engines, are able to communicate. Can I use in some way the import Virtual Machine functionality with the "KVM(via Libvirt)" source type? Or is there (eventually via command line) a way to use virt-v2v in this case? Thanks, Gianluca

3 9

GlusterFS and oVirt
by Magnus Isaksson 20 Jan '19

20 Jan '19

Hello I have quite some trouble getting Gluster to work. I have 4 nodes running CentOS and oVirt. These 4 nodes is split up in 2 clusters. I do not run Gluster via oVirt, i run it stand alone to be able to use all 4 nodes into one gluster volume. I can add all peers successfully, and i can create an volume and start it with sucess, but after that it starts to getting troublesome. If i run gluster volume status after starting the volume it times out, i have read that ping-time needs to bee more than 0 so i set it on 30, Still the same problem. From now on, i can not stop a volume nor remove it, i have to stop glusterd and remove it from /var/lib/gluster/vols/* on all nodes to be able to do anything with gluster. From time to time when i do a gluster peer status it shows "disconnected" and when i run it again directly after it show "connected" I get a lot of these errors in glusterd.log [2019-01-20 12:53:46.087848] W [rpc-clnt-ping.c:223:rpc_clnt_ping_cbk] 0-management: socket disconnected [2019-01-20 12:53:46.087858] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:55.091598] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:56.094846] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:56.097482] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed What am i doing wrong? //Magnus

1 0

HyperConverged Self-Hosted deployment fails
by hunter86_bg＠yahoo.com 19 Jan '19

19 Jan '19

Hello Community, recently I managed somehow to deploy a 2 node cluster on GlusterFS , but after a serious engine failiure - I have decided to start from scratch. What I have done so far: 1. Inctall CentOS7 from scratch 2. Add ovirt repositories, vdo,cockpit for ovirt 3. Deployed the gluster cluster using cockpit 4. Trying to deploy the hosted-engine , which has failed several times. Up to now I have detected that ovirt-ha-agent is giving: яну 19 13:54:57 ovirt1.localdomain ovirt-ha-agent[16992]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.agent.Agent ERROR Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 131, in _run_agent return action(he) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 55, in action_proper return he.start_monitoring() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 413, in start_monitoring self._initialize_broker() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 535, in _initialize_broker m.get('options', {})) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 83, in start_monitor .format(type, options, e )) RequestError: Failed to start monitor ping, options {'addr': '192.168.1.1'}: [Errno 2] No such file or directory According to https://access.redhat.com/solutions/3353391 , the /etc/ovirt-hosted-engine/hosted-engine.conf should be empty , but it's OK: [root@ovirt1 tmp]# cat /etc/ovirt-hosted-engine/hosted-engine.conf fqdn=engine.localdomain vm_disk_id=bb0a9839-a05d-4d0a-998c-74da539a9574 vm_disk_vol_id=c1fc3c59-bc6e-4b74-a624-557a1a62a34f vmid=d0e695da-ec1a-4d6f-b094-44a8cac5f5cd storage=ovirt1.localdomain:/engine nfs_version= mnt_options=backup-volfile-servers=ovirt2.localdomain:ovirt3.localdomain conf=/var/run/ovirt-hosted-engine-ha/vm.conf host_id=1 console=vnc domainType=glusterfs spUUID=00000000-0000-0000-0000-000000000000 sdUUID=444e524e-9008-48f8-b842-1ce7b95bf248 connectionUUID=e29cf818-5ee5-46e1-85c1-8aeefa33e95d ca_cert=/etc/pki/vdsm/libvirt-spice/ca-cert.pem ca_subject="C=EN, L=Test, O=Test, CN=Test" vdsm_use_ssl=true gateway=192.168.1.1 bridge=ovirtmgmt metadata_volume_UUID=a3be2390-017f-485b-8f42-716fb6094692 metadata_image_UUID=368fb8dc-6049-4ef0-8cf8-9d3c4d772d59 lockspace_volume_UUID=41762f85-5d00-488f-bcd0-3de49ec39e8b lockspace_image_UUID=de100b9b-07ac-4986-9d86-603475572510 conf_volume_UUID=4306f6d6-7fe9-499d-81a5-6b354e8ecb79 conf_image_UUID=d090dd3f-fc62-442a-9710-29eeb56b0019 # The following are used only for iSCSI storage iqn= portal= user= password= port= Ovirt-ha-agent version is: ovirt-hosted-engine-ha-2.2.18-1.el7.noarch Can you guide me in order to resolve this issue and to deploy the self-hosted engine ? Where should I start from ?

3 4

oVirt 4.3 rc2: export ova and attempt to import to itself via script?
by Gianluca Cecchi 18 Jan '19

18 Jan '19

Hello, I verified that in 4.3 rc2 I can now export as ova a running VM: I have a CentOS Atomic 7 VM and when I export as ova, a snapshot is executed and then the ova file seems directly generated, bypassing the previous copy on storage domain: [root@hcinode1 ]# ll /export/ total 1141632 -rw-------. 1 root root 1401305088 Jan 18 11:10 c7atomic1.ova.tmp [root@hcinode1 ]# ll /export/ total 1356700 -rw-------. 1 root root 1401305088 Jan 18 11:10 c7atomic1.ova [root@hcinode1 ]# And at the end the snaphsot has been correctly removed. events: Vm c7atomic1 was exported successfully as a Virtual Appliance to path /export/c7atomic1.ova on Host hcinode1 1/18/19 11:10:23 AM Starting to export Vm c7atomic1 as a Virtual Appliance 1/18/19 11:08:47 AM Now if I try for test to import this generated OVA to the same environment with this script: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_o… I get a duplicate error, see below. Is it a limitation of the python script or what? If I go from the gui and I chose "Virtual Appliance (OVA)" as source and the same host and file path I can successfully import the OVA, provided I change the name of the VM to be imported. Thanks, Gianluca [root@hcinode1 ~]# ./upload_ova_as_vm.py /export/c7atomic1.ova Default vmstore Connecting... Creating disk... {'capacityAllocationUnits': 'byte * 2^30', 'capacity': '10', 'description': 'Auto-generated for Export To OVA', 'pass-discard': 'false', 'format': ' http://www.gnome.org/~markmc/qcow-image-format.html', 'volume-type': 'Sparse', 'boot': 'true', 'disk-alias': 'GlanceDisk-5f429e6', 'disk-interface': 'VirtIO', 'volume-format': 'COW', 'cinder_volume_type': '', 'disk-description': 'CentOS 7 Atomic Host Image v1802 for x86_64 (5f429e6)', 'parentRef': '', 'fileRef': 'c6b2e076-1519-433e-9b37-2005c9ce6d2e', 'populatedSize': '1401290752', 'disk_storage_type': 'IMAGE', 'diskId': 'e4f92226-0f56-4822-a622-d1ebff41df9f', 'wipe-after-delete': 'false'} Traceback (most recent call last): File "./upload_ova_as_vm.py", line 133, in <module> name=target_storage_domain_name File "/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py", line 6794, in add return self._internal_add(disk, headers, query, wait) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 232, in _internal_add return future.wait() if wait else future File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 55, in wait return self._code(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 229, in callback self._check_fault(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 132, in _check_fault self._raise_error(response, body) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 118, in _raise_error raise error ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[Internal Engine Error]". HTTP response code is 400. [root@hcinode1 ~]# On engine: 2019-01-18 11:24:46,561+01 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (default task-26) [3b08d759-27d3-42f3-9eee-95c135e88a7b] BaseAsyncTask::startPollingTask: Starting to poll task '81fbeac3-2c58-4f8a-a3da-44bdbe585beb'. 2019-01-18 11:24:46,691+01 ERROR [org.ovirt.engine.core.bll.storage.disk.AddDiskCommand] (default task-26) [3b08d759-27d3-42f3-9eee-95c135e88a7b] Command 'org.ovirt.engine.core.bll.storage.disk.AddDiskCommand' failed: CallableStatementCallback; SQL [{call insertpermission(?, ?, ?, ?, ?)}ERROR: duplicate key value violates unique constraint "idx_combined_ad_role_object" Detail: Key (ad_element_id, role_id, object_id)=(9d37881c-1991-11e9-b002-00163e7cb696, def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f) already exists. Where: SQL statement "INSERT INTO permissions ( ad_element_id, id, role_id, object_id, object_type_id ) VALUES ( v_ad_element_id, v_id, v_role_id, v_object_id, v_object_type_id )" PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at SQL statement; nested exception is org.postgresql.util.PSQLException: ERROR: duplicate key value violates unique constraint "idx_combined_ad_role_object" Detail: Key (ad_element_id, role_id, object_id)=(9d37881c-1991-11e9-b002-00163e7cb696, def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f) already exists. Where: SQL statement "INSERT INTO permissions ( ad_element_id, id, role_id, object_id, object_type_id ) VALUES ( v_ad_element_id, v_id, v_role_id, v_object_id, v_object_type_id )" PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at SQL statement 2019-01-18 11:24:46,691+01 ERROR [org.ovirt.engine.core.bll.storage.disk.AddDiskCommand] (default task-26) [3b08d759-27d3-42f3-9eee-95c135e88a7b] Exception: org.springframework.dao.DuplicateKeyException: CallableStatementCallback; SQL [{call insertpermission(?, ?, ?, ?, ?)}ERROR: duplicate key value violates unique constraint "idx_combined_ad_role_object" Detail: Key (ad_element_id, role_id, object_id)=(9d37881c-1991-11e9-b002-00163e7cb696, def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f) already exists. Where: SQL statement "INSERT INTO permissions ( ad_element_id, id, role_id, object_id, object_type_id ) VALUES ( v_ad_element_id, v_id, v_role_id, v_object_id, v_object_type_id )" PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at SQL statement; nested exception is org.postgresql.util.PSQLException: ERROR: duplicate key value violates unique constraint "idx_combined_ad_role_object" Detail: Key (ad_element_id, role_id, object_id)=(9d37881c-1991-11e9-b002-00163e7cb696, def0000a-0000-0000-0000-def00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f) already exists. Where: SQL statement "INSERT INTO permissions ( ad_element_id, id, role_id, object_id, object_type_id ) VALUES ( v_ad_element_id, v_id, v_role_id, v_object_id, v_object_type_id )" PL/pgSQL function insertpermission(uuid,uuid,uuid,uuid,integer) line 3 at SQL statement at org.springframework.jdbc.support.SQLErrorCodeSQLExceptionTranslator.doTranslate(SQLErrorCodeSQLExceptionTranslator.java:243) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:72) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.translateException(JdbcTemplate.java:1402) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:1065) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:1104) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.simple.AbstractJdbcCall.executeCallInternal(AbstractJdbcCall.java:414) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.simple.AbstractJdbcCall.doExecute(AbstractJdbcCall.java:374) [spring-jdbc.jar:5.0.4.RELEASE] at org.springframework.jdbc.core.simple.SimpleJdbcCall.execute(SimpleJdbcCall.java:198) [spring-jdbc.jar:5.0.4.RELEASE] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:135) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:130) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeModification(SimpleJdbcCallsHandler.java:76) [dal.jar:] at org.ovirt.engine.core.dao.PermissionDaoImpl.save(PermissionDaoImpl.java:256) [dal.jar:] at org.ovirt.engine.core.dao.PermissionDaoImpl.save(PermissionDaoImpl.java:22) [dal.jar:] at org.ovirt.engine.core.bll.MultiLevelAdministrationHandler.addPermission(MultiLevelAdministrationHandler.java:67) [bll.jar:] at org.ovirt.engine.core.bll.storage.disk.AddDiskCommand.addDiskPermissions(AddDiskCommand.java:628) [bll.jar:] at org.ovirt.engine.core.bll.storage.disk.AddDiskCommand.createDiskBasedOnImage(AddDiskCommand.java:558) [bll.jar:] at org.ovirt.engine.core.bll.storage.disk.AddDiskCommand.executeVmCommand(AddDiskCommand.java:429) [bll.jar:] at org.ovirt.engine.core.bll.VmCommand.executeCommand(VmCommand.java:158) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:1147) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeActionInTransactionScope(CommandBase.java:1305) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:1954) [bll.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppressed(TransactionSupport.java:164) [utils.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(TransactionSupport.java:103) [utils.jar:] at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1365) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:413) [bll.jar:] at org.ovirt.engine.core.bll.executor.DefaultBackendActionExecutor.execute(DefaultBackendActionExecutor.java:13) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runAction(Backend.java:450) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runActionImpl(Backend.java:432) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runAction(Backend.java:387) [bll.jar:] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [rt.jar:1.8.0_191] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) [rt.jar:1.8.0_191] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_191] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_191] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:509) at org.jboss.as.weld.ejb.DelegatingInterceptorInvocationContext.proceed(DelegatingInterceptorInvocationContext.java:92) [wildfly-weld-ejb-14.0.1.Final.jar:14.0.1.Final] at org.jboss.weld.interceptor.proxy.WeldInvocationContextImpl.interceptorChainCompleted(WeldInvocationContextImpl.java:107) [weld-core-impl-3.0.5.Final.jar:3.0.5.Final] . . . at org.jboss.threads.EnhancedQueueExecutor$ThreadBody.run(EnhancedQueueExecutor.java:1378) at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_191] Caused by: org.postgresql.util.PSQLException: ERROR: duplicate key value violates unique constraint "idx_combined_a d_role_object" Detail: Key (ad_element_id, role_id, object_id)=(9d37881c-1991-11e9-b002-00163e7cb696, def0000a-0000-0000-0000-de f00000000b, e4f92226-0f56-4822-a622-d1ebff41df9f) already exists.

2 1

Import VM from OVA not working
by kiv＠intercom.pro 18 Jan '19

18 Jan '19

Hi all. Make dir /var/lib/exports/import chown 36:36 /var/lib/exports/import/VM.ova Go to oVirt admin portal. Import Vm from OVA source. In file path - /var/lib/exports/import/VM.ova Error: Failed to load VM configuration from OVA file: /var/lib/exports/import/VM.ova Log file ovirt-query-ova-ansible: 2019-01-18 10:26:25,018 p=8066 u=ovirt | Traceback (most recent call last): File "/root/.ansible/tmp/ansible-tmp-1547789184.32-243441920380227/query_ova.py", line 59, in <module> ovf = get_ovf_from_dir(ova_path, sys.argv[2]) File "/root/.ansible/tmp/ansible-tmp-1547789184.32-243441920380227/query_ova.py", line 29, in get_ovf_from_dir files = os.listdir(ova_path) OSError: [Errno 2] No such file or directory: '/var/lib/exports/import/VM.ova' ls -la /var/lib/exports/import/ -rw-r--r--. 1 vdsm kvm 4165205504 Jan 17 22:51 VM.ova

2 1

ovirt node ng 4.3.0 rc1 upgrade fails
by Jorick Astrego 18 Jan '19

18 Jan '19

Hi, Trying to update oVirt Node 4.2.7.1 to 4.3.0, but it fails with the following dependencies: "Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist,\n : package_upload, product-id, search-disabled-repos, subscription-\n : manager, vdsmupgrade\nThis system is not registered with an entitlement server. You can use subscription-manager to register.\nLoading mirror speeds from cached hostfile\n * ovirt-4.3-epel: ftp.nluug.nl\nResolving Dependencies\n--> Running transaction check\n---> Package ovirt-host.x86_64 0:4.2.3-1.el7 will be updated\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an update\n--> Processing Dependency: ovirt-host-dependencies = 4.3.0-1.el7 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: aide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap-utils for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: scap-security-guide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Running transaction check\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an update\n--> Processing Dependency: aide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap-utils for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: scap-security-guide for package: ovirt-host-4.3.0-1.el7.x86_64\n---> Package ovirt-host-dependencies.x86_64 0:4.2.3-1.el7 will be updated\n---> Package ovirt-host-dependencies.x86_64 0:4.3.0-1.el7 will be an update\n--> Processing Dependency: vdsm >= 4.30.5 for package: ovirt-host-dependencies-4.3.0-1.el7.x86_64\n--> Processing Dependency: vdsm-client >= 4.30.5 for package: ovirt-host-dependencies-4.3.0-1.el7.x86_64\n--> Running transaction check\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an update\n--> Processing Dependency: aide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap-utils for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: scap-security-guide for package: ovirt-host-4.3.0-1.el7.x86_64\n---> Package vdsm.x86_64 0:4.20.43-1.el7 will be updated\n--> Processing Dependency: vdsm = 4.20.43-1.el7 for package: vdsm-hook-ethtool-options-4.20.43-1.el7.noarch\n--> Processing Dependency: vdsm = 4.20.43-1.el7 for package: vdsm-gluster-4.20.43-1.el7.x86_64\n--> Processing Dependency: vdsm = 4.20.43-1.el7 for package: vdsm-hook-vmfex-dev-4.20.43-1.el7.noarch\n--> Processing Dependency: vdsm = 4.20.43-1.el7 for package: vdsm-hook-fcoe-4.20.43-1.el7.noarch\n---> Package vdsm.x86_64 0:4.30.5-1.el7 will be an update\n--> Processing Dependency: vdsm-http = 4.30.5-1.el7 for package: vdsm-4.30.5-1.el7.x86_64\n--> Processing Dependency: vdsm-jsonrpc = 4.30.5-1.el7 for package: vdsm-4.30.5-1.el7.x86_64\n--> Processing Dependency: vdsm-python = 4.30.5-1.el7 for package: vdsm-4.30.5-1.el7.x86_64\n--> Processing Dependency: qemu-kvm-rhev >= 10:2.12.0-18.el7_6.1 for package: vdsm-4.30.5-1.el7.x86_64\n---> Package vdsm-client.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-client.noarch 0:4.30.5-1.el7 will be an update\n--> Processing Dependency: vdsm-api = 4.30.5-1.el7 for package: vdsm-client-4.30.5-1.el7.noarch\n--> Processing Dependency: vdsm-yajsonrpc = 4.30.5-1.el7 for package: vdsm-client-4.30.5-1.el7.noarch\n--> Running transaction check\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an update\n--> Processing Dependency: aide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap-utils for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: scap-security-guide for package: ovirt-host-4.3.0-1.el7.x86_64\n---> Package qemu-kvm-ev.x86_64 10:2.10.0-21.el7_5.7.1 will be updated\n---> Package qemu-kvm-ev.x86_64 10:2.12.0-18.el7_6.1.1 will be an update\n--> Processing Dependency: qemu-kvm-common-ev = 10:2.12.0-18.el7_6.1.1 for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n--> Processing Dependency: qemu-img-ev = 10:2.12.0-18.el7_6.1.1 for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n--> Processing Dependency: libibumad.so.3()(64bit) for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n--> Processing Dependency: libgbm.so.1()(64bit) for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n--> Processing Dependency: libepoxy.so.0()(64bit) for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n---> Package vdsm-api.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-api.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-gluster.x86_64 0:4.20.43-1.el7 will be updated\n---> Package vdsm-gluster.x86_64 0:4.30.5-1.el7 will be an update\n---> Package vdsm-hook-ethtool-options.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-hook-ethtool-options.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-hook-fcoe.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-hook-fcoe.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-hook-vmfex-dev.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-http.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-http.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-jsonrpc.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-jsonrpc.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-python.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-python.noarch 0:4.30.5-1.el7 will be an update\n--> Processing Dependency: vdsm-common = 4.30.5-1.el7 for package: vdsm-python-4.30.5-1.el7.noarch\n--> Processing Dependency: vdsm-network = 4.30.5-1.el7 for package: vdsm-python-4.30.5-1.el7.noarch\n---> Package vdsm-yajsonrpc.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-yajsonrpc.noarch 0:4.30.5-1.el7 will be an update\n--> Running transaction check\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an update\n--> Processing Dependency: aide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: openscap-utils for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: scap-security-guide for package: ovirt-host-4.3.0-1.el7.x86_64\n---> Package qemu-img-ev.x86_64 10:2.10.0-21.el7_5.7.1 will be updated\n---> Package qemu-img-ev.x86_64 10:2.12.0-18.el7_6.1.1 will be an update\n---> Package qemu-kvm-common-ev.x86_64 10:2.10.0-21.el7_5.7.1 will be updated\n---> Package qemu-kvm-common-ev.x86_64 10:2.12.0-18.el7_6.1.1 will be an update\n---> Package qemu-kvm-ev.x86_64 10:2.12.0-18.el7_6.1.1 will be an update\n--> Processing Dependency: libibumad.so.3()(64bit) for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n--> Processing Dependency: libgbm.so.1()(64bit) for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n--> Processing Dependency: libepoxy.so.0()(64bit) for package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64\n---> Package vdsm-common.noarch 0:4.20.43-1.el7 will be updated\n---> Package vdsm-common.noarch 0:4.30.5-1.el7 will be an update\n---> Package vdsm-network.x86_64 0:4.20.43-1.el7 will be updated\n---> Package vdsm-network.x86_64 0:4.30.5-1.el7 will be an update\n--> Finished Dependency Resolution\n You could try using --skip-broken to work around the problem\n You could try running: rpm -Va --nofiles --nodigest\nUploading Enabled Repositories Report\nLoaded plugins: fastestmirror, product-id, subscription-manager\nThis system is not registered with an entitlement server. You can use subscription-manager to register.\n" ] } MSG: 2019-01-11 14:25:52,185 [INFO] yum:52830:MainThread @connection.py:871 - Connection built: host=subscription.rhsm.redhat.com port=443 handler=/subscription auth=identity_cert ca_dir=/etc/rhsm/ca/ insecure=False 2019-01-11 14:25:52,186 [INFO] yum:52830:MainThread @repolib.py:494 - repos updated: Repo updates Total repo updates: 0 Updated <NONE> Added (new) <NONE> Deleted <NONE> Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64 (ovirt-4.3-centos-qemu-ev) Requires: libibumad.so.3()(64bit) Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64 (ovirt-4.3-centos-qemu-ev) Requires: libgbm.so.1()(64bit) Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: openscap-utils Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: openscap Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: pam_pkcs11 Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: aide Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64 (ovirt-4.3-centos-qemu-ev) Requires: libepoxy.so.0()(64bit) Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: scap-security-guide Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts ---------------- Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ----------------

2 4

ovirtmgmt always out of sync on ovirt node
by Jorick Astrego 18 Jan '19

18 Jan '19

Hi, We're switching from Centos 7 hosts to oVirt node ng (tried 4.2.7, 4.3rc1 and 4.3rc2) and after adding them to oVirt (currently on 4.3rc2) the ovirtmgmt interface is always out of sync. Tried synching the network and refresh capabilities. I also tried removing ovirtmgmt from the interface and adding it to a bond, then I get this error: Cannot setup Networks. The following Network definitions on the Network Interface are different than those on the Logical Network. Please synchronize the Network Interface before editing network ovirtmgmt. The non-synchronized values are: ${OUTAVERAGELINKSHARE} ${HOST_OUT_OF_SYNC} - null, ${DC_OUT_OF_SYNC} - 50 I can setup the bond at install so the ovirtmgmt will use it so I can use the host, but I'm hesitant to do this in production as I cannot change the interface anymore. Regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts ---------------- Tel: 053 20 30 270 info(a)netbulae.eu Staalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ----------------

3 3

Converting Thin/Dependent to Thick/Independent
by Luca 'remix_tj' Lorenzetto 18 Jan '19

18 Jan '19

Hello, I'm looking for a way for speeding up the deployment of new vms. I've seen that if i use, under "Resource Allocation", "Storage Allocation" flagged Thin, the vm creation is very quick. But this makes the machine dependent from the template and if, for any reason, the template gets corrupted or is not accessible, the vm will not boot. Is there any way for converting the vm from dependent to independent while this is online? Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>

1 0

oVirt 4.3 RC2 and libgfapi
by Gianluca Cecchi 18 Jan '19

18 Jan '19

Just installed a single host HCI with gluster, with only the engine vm running. Is it expected this situation below? # virsh -r list Id Name State ---------------------------------------------------- 2 HostedEngine running and # virsh -r dumpxml 2 . . . <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='native' iothread='1'/> <source file='/var/run/vdsm/storage/e4eb6832-e0f6-40ee-902f-f301e5a3a643/fc34d770-9318-4539-9233-bfb1c5d68d14/b151557e-f1a2-45cb-b5c9-12c1f470467e'> <seclabel model='dac' relabel='no'/> </source> <backingStore/> <target dev='vda' bus='virtio'/> <serial>fc34d770-9318-4539-9233-bfb1c5d68d14</serial> <alias name='ua-fc34d770-9318-4539-9233-bfb1c5d68d14'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </disk> . . . where # ll /var/run/vdsm/storage/e4eb6832-e0f6-40ee-902f-f301e5a3a643/ total 24 lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44 39df7b45-4932-4bfe-b69e-4fb2f8872f4f -> /rhev/data-center/mnt/glusterSD/10.10.10.216: _engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/39df7b45-4932-4bfe-b69e-4fb2f8872f4f lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44 5ba6cd9e-b78d-4de4-9b7f-9688365128bf -> /rhev/data-center/mnt/glusterSD/10.10.10.216: _engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/5ba6cd9e-b78d-4de4-9b7f-9688365128bf lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 15:56 8b8e41e0-a875-4204-8ab1-c10214a49f5c -> /rhev/data-center/mnt/glusterSD/10.10.10.216: _engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/8b8e41e0-a875-4204-8ab1-c10214a49f5c lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 15:56 c21a62ba-73d2-4914-940f-cee6a67a1b08 -> /rhev/data-center/mnt/glusterSD/10.10.10.216: _engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/c21a62ba-73d2-4914-940f-cee6a67a1b08 lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44 fc34d770-9318-4539-9233-bfb1c5d68d14 -> /rhev/data-center/mnt/glusterSD/10.10.10.216: _engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/fc34d770-9318-4539-9233-bfb1c5d68d14 lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44 fd73354d-699b-478e-893c-e2a0bd1e6cbb -> /rhev/data-center/mnt/glusterSD/10.10.10.216: _engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/fd73354d-699b-478e-893c-e2a0bd1e6cbb so hosted engine not using libgfapi? Also, on hosted engine [root@hciengine ~]# engine-config -g LibgfApiSupported LibgfApiSupported: false version: 4.1 LibgfApiSupported: false version: 4.2 LibgfApiSupported: false version: 4.3 [root@hciengine ~]# So that if I import a CentOS7 Atomic host image from glance repo as template and create a new vm from it,when running this VM I get # virsh -r dumpxml 3 . . . <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='qcow2' cache='none' error_policy='stop' io='native' iothread='1'/> <source file='/rhev/data-center/mnt/glusterSD/10.10.10.216: _data/601d725a-1622-4dc8-a24d-2dba72ddf6ae/images/e4f92226-0f56-4822-a622-d1ebff41df9f/c6b2e076-1519-433e-9b37-2005c9ce6d2e'> <seclabel model='dac' relabel='no'/> </source> <backingStore/> <target dev='vda' bus='virtio'/> <serial>e4f92226-0f56-4822-a622-d1ebff41df9f</serial> <boot order='1'/> <alias name='ua-e4f92226-0f56-4822-a622-d1ebff41df9f'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </disk> . . . I remember there was an "old" bug opened causing this default of not enabling libgfapi Does this mean it was not solved yet? If I remember correctly the bugzilla was this one related to HA: https://bugzilla.redhat.com/show_bug.cgi?id=1484227 that is still in new status.... since almost 2 years Is this the only one open? Thanks, Gianluca

3 2

ovirt 4.3 / Adding NFS storage issue
by Devin Acosta 18 Jan '19

18 Jan '19

I installed the latest 4.3 release candidate and tried to add an NFS mount to the Data Center, and it errors in the GUI with “Error while executing action New NFS Storage Domain: Invalid parameter”, then in the vdsm.log I see it is passing “block_size=None”. Does this regardless if NFS v3 or v4. InvalidParameterException: Invalid parameter: 'block_size=None' 2019-01-12 20:37:58,241-0700 INFO (jsonrpc/7) [vdsm.api] START createStorageDomain(storageType=1, sdUUID=u'b30c64c4-4b1f-4ebf-828b-e54c330ae84c', domainName=u'nfsdata', typeSpecificArg=u'192.168.19.155:/data/data', domClass=1, domVersion=u'4', block_size=None, max_hosts=2000, options=None) from=::ffff:192.168.19.178,51042, flow_id=67743df7, task_id=ad82f581-9638-48f1-bcd9-669b9809b34a (api:48) 2019-01-12 20:37:58,241-0700 INFO (jsonrpc/7) [vdsm.api] FINISH createStorageDomain error=Invalid parameter: 'block_size=None' from=::ffff:192.168.19.178,51042, flow_id=67743df7, task_id=ad82f581-9638-48f1-bcd9-669b9809b34a (api:52) 2019-01-12 20:37:58,241-0700 ERROR (jsonrpc/7) [storage.TaskManager.Task] (Task='ad82f581-9638-48f1-bcd9-669b9809b34a') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "<string>", line 2, in createStorageDomain File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method ret = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2583, in createStorageDomain alignment = clusterlock.alignment(block_size, max_hosts) File "/usr/lib/python2.7/site-packages/vdsm/storage/clusterlock.py", line 661, in alignment raise se.InvalidParameterException('block_size', block_size) InvalidParameterException: Invalid parameter: 'block_size=None' 2019-01-12 20:37:58,242-0700 INFO (jsonrpc/7) [storage.TaskManager.Task] (Task='ad82f581-9638-48f1-bcd9-669b9809b34a') aborting: Task is aborted: u"Invalid parameter: 'block_size=None'" - code 100 (task:1181) 2019-01-12 20:37:58,242-0700 ERROR (jsonrpc/7) [storage.Dispatcher] FINISH createStorageDomain error=Invalid parameter: 'block_size=None' (dispatcher:81) 2019-01-12 20:37:58,242-0700 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call StorageDomain.create failed (error 1000) in 0.00 seconds (__init__:312) 2019-01-12 20:37:58,541-0700 INFO (jsonrpc/1) [vdsm.api] START disconnectStorageServer(domType=1, spUUID=u'00000000-0000-0000-0000-000000000000', conList=[{u'tpgt': u'1', u'id': u'db7d16c8-7497-42db-8a75-81cb7f9d3350', u'connection': u'192.168.19.155:/data/data', u'iqn': u'', u'user': u'', u'ipv6_enabled': u'false', u'protocol_version': u'auto', u'password': '********', u'port': u''}], options=None) from=::ffff:192.168.19.178,51042, flow_id=7e4cb4fa-1437-4d5b-acb5-958838ecd54c, task_id=1d004ea2-ae84-4c95-8c70-29e205efd4b1 (api:48) 2019-01-12 20:37:58,542-0700 INFO (jsonrpc/1) [storage.Mount] unmounting /rhev/data-center/mnt/192.168.19.155:_data_data (mount:212) 2019-01-12 20:37:59,087-0700 INFO (jsonrpc/1) [vdsm.api] FINISH disconnectStorageServer return={'statuslist': [{'status': 0, 'id': u'db7d16c8-7497-42db-8a75-81cb7f9d3350'}]} from=::ffff:192.168.19.178,51042, flow_id=7e4cb4fa-1437-4d5b-acb5-958838ecd54c, task_id=1d004ea2-ae84-4c95-8c70-29e205efd4b1 (api:54) 2019-01-12 20:37:59,089-0700 INFO (jsonrpc/1) [jsonrpc.JsonRpcServer] RPC call StoragePool.disconnectStorageServer succeeded in 0.55 seconds (__init__:312)

4 3