- Users - oVirt List Archives

Re: Ovirt host addition failed
by Dafna Ron 14 Dec '18

14 Dec '18

Correct email for this would be users(a)ovirt.org (added) I also suggest that you attach the logs from the engine and the host machines On Thu, Dec 13, 2018 at 9:30 PM Shoeb Chowdhury <shoeb.ch(a)gmail.com> wrote: > I've installed oVirt Node 4.2.0 in one physical server and oVirt Engine > 4.2.7.5-1.el7 in another physical server. When I wanted to add host from > ovirt engine administrative portal I'm getting the follwing errors - > 1. When I use authenticatio with root password - Error while executing > action: Cannot add Host. Connecting to host via SSH has failed, verify that > the host is reachable (IP address, routable address etc.) You may refer to > the engine.log file for further details. > 2. When I use authentication wiht SSH publc key - Error while executing > action: Cannot add Host. SSH authentication failed, verify authentication > parameters are correct (Username/Password, public-key etc.) You may refer > to the engine.log file for further details. > > Note that IP connectivity from Engine to Host is ok. I checked manaully > SSH login from engine to node ip. > _______________________________________________ > Infra mailing list -- infra(a)ovirt.org > To unsubscribe send an email to infra-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/infra@ovirt.org/message/TWRNNWFILPP7L… >

1 0

Memory usage inclines
by Tony Brian Albers 14 Dec '18

14 Dec '18

Hi guys, We have a small test installation here running around 30 vms on 2 hosts. oVirt 4.2.5.3 The hosts each have 512 GB memory, and the vms are sized with 4-8 GB each. I have noticed that over the last months, the memory usage in the dashboard has been increasing and is now showing 946.8 GB used of 1007.2 GB. What can be causing this? TIA, -- -- Tony Albers Systems Architect Systems Director, National Cultural Heritage Cluster Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark. Tel: +45 2566 2383 / +45 8946 2316

2 8

Ovirt Authentication extensions
by darkytoo＠gmail.com 13 Dec '18

13 Dec '18

I've seen the articles about hooking ovirt to AD and keycloak, but is there a way to hook it to something like ADFS? I'd like to have it require an MFA login and I know I can do it with ADFS.

1 0

Gluster with two ovirt nodes
by Stefan Wolf 13 Dec '18

13 Dec '18

Hello, i like to set up glusterfs with two ovirt nodes and on more "normal" node is this possible? i 've setup glusterfs in cli on two ovirt nodes and 3rd network storage. glusterfs is up and running. But now i like to get something like VIP with ctdb for example. is there any possibility to set this up with ovirt? Or do i *ve to setup ovirt manually in centos to install ctdb? Or are there any other ideas? thank you stefan

2 1

oVirt Nested Virtualization
by Markus Schaufler 13 Dec '18

13 Dec '18

Hi! I'd like to try the HCI Rollout https://ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyper… on my oVirt Infrastructure. The hosts have "nested virtualization" active, but when starting the Hosted Engine deployment from cockpit an the error "Hardware virtualization is not supported on this host" occurs. cat /sys/module/kvm_intel/parameters/nested Y Any ideas on this?

4 7

Not able to install HostedEngine
by Stefan Wolf 13 Dec '18

13 Dec '18

Hello, i like to setup a complete new cluster I install the version 4.2.1.7 I set up ip during installation process After reboot I enable by changing /etc/sysconfig/network-scripts/ifcfg-ens1f0 from ONBOOT=no to yes Than I try to install hosted-engine as described here: https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_… I prepare the installation process with yum install ovirt-engine-appliance then i 've tried both variants grafical installation with cockpit and the cli after setting up the network, the network is no longer working and the installtion will break everything seems fine but network isn't running a reboot will not help thx stefan [image: image.png]

1 0

Ovirt 4.3 Alpha AMD 2970WX Windows VM creation and NUMA
by Darin Schmidt 13 Dec '18

13 Dec '18

Not sure if Users is the best place for this as Im using 4.3 to test support for my AMD 2970WX Threadripper but While trying to setup a Windows VM, it fails. I have a working CentOS 7 running. Heres what I get when I try to startup the VM. VM Windows-Darin is down with error. Exit message: internal error: process exited while connecting to monitor: WARNING: Image format was not specified for '/dev/sg0' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. 2018-12-02T18:43:05.358741Z qemu-kvm: warning: CPU(s) not present in any NUMA nodes: CPU 10 [socket-id: 10, core-id: 0, thread-id: 0], CPU 11 [socket-id: 11, core-id: 0, thread-id: 0], CPU 12 [socket-id: 12, core-id: 0, thread-id: 0], CPU 13 [socket-id: 13, core-id: 0, thread-id: 0], CPU 14 [socket-id: 14, core-id: 0, thread-id: 0], CPU 15 [socket-id: 15, core-id: 0, thread-id: 0] 2018-12-02T18:43:05.358791Z qemu-kvm: warning: All CPU(s) up to maxcpus should be described in NUMA config, ability to start up with partial NUMA mappings is obsoleted and will be removed in future 2018-12-02T18:43:05.359052Z qemu-kvm: can't apply global EPYC-x86_64-cpu.hv-synic=on: Property '.hv-synic' not found. NUMA doesnt seem to resolve the issue any even if I set NUMA to be 1 and place it on a NUMA that has 12 cores and 64GB ram. I also dont fully understand NUMA because it creates 4 NUMA sockets even though technically there should be 2 correct? I dont get how NUMA is setup, but either way it doesnt help resolve any issues. [root@ovirt ~]# numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 24 25 26 27 28 29 node 0 size: 65429 MB node 0 free: 54322 MB node 1 cpus: 12 13 14 15 16 17 36 37 38 39 40 41 node 1 size: 0 MB node 1 free: 0 MB node 2 cpus: 6 7 8 9 10 11 30 31 32 33 34 35 node 2 size: 32754 MB node 2 free: 27699 MB node 3 cpus: 18 19 20 21 22 23 42 43 44 45 46 47 node 3 size: 0 MB node 3 free: 0 MB node distances: node 0 1 2 3 0: 10 16 16 16 1: 16 10 16 16 2: 16 16 10 16 3: 16 16 16 10 link to my messages and vdsm log https://drive.google.com/open?id=1v-Wjcj7xLZIcR2GKR-P659yE14r1-hsz https://drive.google.com/open?id=1BHvcS2Dgan68hQkVdOmme1gP1ciSsejL

3 6

removal of 3 vdsm hooks
by Dan Kenigsberg 13 Dec '18

13 Dec '18

I've identified 3 ancient vdsm-hooks that have been obsoleted by proper oVirt features. vdsm-hook-isolatedvlan: obsoleted in ovirt-4.2.6 by clean-traffic-gateway filter https://gerrit.ovirt.org/#/q/I396243e1943eca245ab4da64bb286da19f9b47ec vdsm-hook-qos: obsoleted in ovirt-3.3 by https://www.ovirt.org/documentation/sla/network-qos/ vdsm-hook-noipspoof: obsoleted in ovirt-4.0 by choosing the "clean-traffic" filter https://ovirt.org/feature/networkfilter I would like to remove this code from vdsm-4.30, destined for ovirt-4.3. Is there any objection for that? Is anybody still using them? Regards, Dan.

3 3

4.2.7 & centos 7.6 dependency problems
by Demeter Tibor 13 Dec '18

13 Dec '18

Dear All, I would like to upgrade my ovirt 4.2.5 to 4.2.7. The hosted engine upgrade was success, but on the nodes i've got an dependency error: ---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed --> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package: mesa-libgbm-18.0.5-3.el7.x86_64 --> Processing Dependency: libwayland-server.so.0()(64bit) for package: mesa-libgbm-18.0.5-3.el7.x86_64 ---> Package nbdkit.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-python2.x86_64 0:1.2.7-2.el7 will be installed --> Processing Dependency: nbdkit-plugin-python-common = 1.2.7-2.el7 for package: nbdkit-plugin-python2-1.2.7-2.el7.x86_64 ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 ---> Package python2-blockdev.x86_64 0:2.18-3.el7 will be installed ---> Package python2-futures.noarch 0:3.1.1-5.el7 will be installed --> Running transaction check ---> Package libwayland-server.x86_64 0:1.15.0-1.el7 will be installed ---> Package mesa-libglapi.x86_64 0:18.0.5-3.el7 will be installed ---> Package nbdkit-plugin-python-common.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution --> Running transaction check ---> Package kernel.x86_64 0:3.10.0-693.11.6.el7 will be erased ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 Available: nbdkit-1.2.6-1.el7.x86_64 (base) nbdkit(x86-64) = 1.2.6-1.el7 Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) nbdkit(x86-64) = 1.2.6-1.el7_6.2 Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) nbdkit(x86-64) = 1.2.7-2.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest How can I solve this? Thanks in advance, Regards, Tibor

4 6

Network Setup after ovirt node Install and before add node to cluster
by Stefan Wolf 12 Dec '18

12 Dec '18

Hello, I ve downloaded an installed OVIRT NODE 4.2.7.1. During the installation I ‘ve setup a static ip (I ‘ve also tried dhcp, both work) The installation passes and after the reboot ovirt node starts without any problems. BUT the network is not configured. I know https://www.ovirt.org/documentation/install-guide/chap-oVirt_Nodes/ and I know https://www.ovirt.org/documentation/admin-guide/chap-Hosts/ and now I am between these two documents oVirt is installed but network is not configured to add it to datacenter of course I know the scripts under /etc/sysconfig/network-scripts do I really have do edit it manuel? if I change ip in command line ip a add … dev.. and ip route add … it fails to add node to datacenter - with one of the last version I ‘ve added the IP address in bash - added the host to datacenter, - after reboot readd the ip address in bash after reboot - an then I could change network settings in oVirt Manger What is best practices for adding a node to datacenter when the ip address is not assigned after installation Thx shb

5 5

Ovirt Maximums
by Brian Wilson 12 Dec '18

12 Dec '18

Is there a resource available that would describe the configurable maximums for the Ovirt Engine and Ovirt Nodes. Things like: How many Logical Networks per host? If one does not exist does anyone have any experiences with reaching limits that caused issues specifically with regards to the number of networks on hosts.

2 2

Ovirt Node Installation issue on Ovirt 4.2
by Hemant Gupta 12 Dec '18

12 Dec '18

Hi, I have downloaded the ISO on physical server but I am unable to attach to my ovirt engine as it showing vdsm error but during update on CentosOS launched with ISO its giving below : [root@r yum.repos.d]# sudo yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload, product-id, search-disabled-repos, vdsmupgrade Examining /var/tmp/yum-root-fu0Y2g/ovirt-release42.rpm: ovirt-release42-4.2.7-1.el7.noarch /var/tmp/yum-root-fu0Y2g/ovirt-release42.rpm: does not update installed package. Error: Nothing to do Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id Cannot upload enabled repos report, is this client registered?

1 0

Configuring Gluster Hyperconverged on Cloud
by pawan.ratwani＠tcs.com 11 Dec '18

11 Dec '18

Hi, I would like to do hands-on on Gluster Hyperconverged environment, and as per my understanding compute and storage has to be on the same hosts. Since I don't have physical infra to support such configuration, I would like to setup 3-node cluster on Cloud e.g. AWS, or Azure. I would like to know if I create an EC2 instance on AWS (or on Azure) with the desired Compute, Storage and Network capacity, is Gluster-hyperconverged cluster setup supported for such deployment ? I am referring https://www.ovirt.org/documentation/gluster-hyperconverged/ for this. Thanks.

2 1

[ANN] oVirt 4.2.8 Second Release Candidate is now available
by Sandro Bonazzola 11 Dec '18

11 Dec '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.8 Second Release Candidate, as of December 11th, 2018. This update is a release candidate of the eighth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node will be available soon due to build issues causing a delay [2] Additional Resources: * Read more about the oVirt 4.2.8 release highlights: http://www.ovirt.org/release/4.2.8/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.8/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Re: losing ib0 connection after activating host
by Douglas Duckworth 11 Dec '18

11 Dec '18

THANK YOU SO MUCH! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Tue, Dec 11, 2018 at 2:03 AM Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com>> wrote: On Mon, 10 Dec 2018 18:09:40 +0000 Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: > Hi Dominik, > > I have added LACP bond network to all hosts and renamed the Hosted Engine using "/usr/share/ovirt-engine/setup/bin/ovirt-engine-rename." > > However, I am still missing the option to assign Migration and Management network roles to this new bond. > > Can you advise where I can find this option? > You cannot assign this role to the host interface directly, but to the network, which is assigned to the interface, in "Compute > Clusters > Clustername > Logical Networks > Manage Networks" > Thanks, > > Douglas Duckworth, MSc, LFCS > HPC System Administrator > Scientific Computing Unit<https://scu.med.cornell.edu> > Weill Cornell Medicine > 1300 York Avenue > New York, NY 10065 > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > O: 212-746-6305 > F: 212-746-8690 > > > On Fri, Aug 24, 2018 at 11:52 AM Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> wrote: > On Fri, 24 Aug 2018 09:46:25 -0400 > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > Sorry, I mean "migration network" for moving live migration traffic. > > > > You have to create a new logical network in > "Network > Networks > New" > and assign this to ib0 in > "Compute > Hosts > hostname > Network Interfaces > Setup Host Networks". > After this you can assign a role to this network in > "Compute > Clusters > Clustername > Logical Networks > Manage Networks" > > > > FDR infiniband much faster than 1Gb network which currently acts as > > migration network, vm network, display network, mgmt network, etc. > > > > Thanks, > > > > Douglas Duckworth, MSc, LFCS > > HPC System Administrator > > Scientific Computing Unit > > Weill Cornell Medicine > > 1300 York - LC-502 > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > O: 212-746-6305 > > F: 212-746-8690 > > > > > > On Fri, Aug 24, 2018 at 9:36 AM, Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> > > wrote: > > > > > On Thu, 23 Aug 2018 13:51:39 -0400 > > > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > > > > > THANKS! > > > > > > > > ib0 now up with NFS storage back on this hypervisor > > > > > > > > > > Thanks for letting us know. > > > > > > > Though how do I make it a transfer network? I don't see an > > > > option. > > > > > > I do not understand the meaning of "transfer network". > > > The network interface to use for NFS results from the routing > > > tables of the host. > > > In "Compute > Clusters > Clustername > Logical Networks > Manage > > > Networks" network roles for some kind of loads can be assigned, but > > > not for NFS access. > > > > > > > > > > Thanks, > > > > > > > > Douglas Duckworth, MSc, LFCS > > > > HPC System Administrator > > > > Scientific Computing Unit > > > > Weill Cornell Medicine > > > > 1300 York - LC-502 > > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > O: 212-746-6305 > > > > F: 212-746-8690 > > > > > > > > > > > > On Thu, Aug 23, 2018 at 11:12 AM, Douglas Duckworth > > > > <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>> > > > > > wrote: > > > > > > > > > Hi Dominik > > > > > > > > > > Yes, the network-script was created by our Ansible role that > > > > > deploys CentOS hosts. It pulls the IP from DNS then templates > > > > > the script and copies to host. > > > > > > > > > > I will try this oVirt step then see if it works! > > > > > > > > > > Thanks, > > > > > > > > > > Douglas Duckworth, MSc, LFCS > > > > > HPC System Administrator > > > > > Scientific Computing Unit > > > > > Weill Cornell Medicine > > > > > 1300 York - LC-502 > > > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > > O: 212-746-6305 > > > > > F: 212-746-8690 > > > > > > > > > > > > > > > On Thu, Aug 23, 2018 at 11:09 AM, Dominik Holler > > > > > <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> wrote: > > > > > > > > > >> Is ifcfg-ib0 created before adding the host? > > > > >> Can ib0 be reconfigured using engine, e.g. by > > > > >> "Compute > Hosts > hostx > Network Interfaces > Setup Host > > > > >> Networks"? If this some kind of self-hosted engine? > > > > >> > > > > >> On Thu, 23 Aug 2018 09:30:59 -0400 > > > > >> Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > > >> > > > > >> > Here's a link to the files: > > > > >> > > > > > >> > https://urldefense.proofpoint.com/v2/url?u=https-3A__bit.ly_ > > > > >> 2wjZ6Vo&d=DwICAg&c=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu > > > > >> 2s&r=2Fzhh_78OGspKQpl_e-CbhH6xUjnRkaqPFUS2wTJ2cw&m=Y25- > > > > >> OOvgu58jlC82-fzBeNIpQ7ZscoHznffUhqE6EBM&s=QQXlC9Tisa60TvimyS > > > > >> 3BnFDCaDF7VPD8eCzT-Fke-p0&e= > > > > >> > > > > > >> > Thank you! > > > > >> > > > > > >> > Thanks, > > > > >> > > > > > >> > Douglas Duckworth, MSc, LFCS > > > > >> > HPC System Administrator > > > > >> > Scientific Computing Unit > > > > >> > Weill Cornell Medicine > > > > >> > 1300 York - LC-502 > > > > >> > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > >> > O: 212-746-6305 > > > > >> > F: 212-746-8690 > > > > >> > > > > > >> > > > > > >> > On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler > > > > >> > <dholler(a)redhat.com<mailto:dholler@redhat.com><mailto:dholler@redhat.com<mailto:dholler@redhat.com>>> wrote: > > > > >> > > > > > >> > > Would you please share the vdsm.log and the supervdsm.log > > > > >> > > from this host? > > > > >> > > > > > > >> > > On Wed, 22 Aug 2018 11:36:09 -0400 > > > > >> > > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu><mailto:dod2014@med.cornell.edu<mailto:dod2014@med.cornell.edu>>> wrote: > > > > >> > > > > > > >> > > > Hi > > > > >> > > > > > > > >> > > > I keep losing ib0 connection on hypervisor after adding > > > > >> > > > host to engine. This makes the host not really work > > > > >> > > > since NFS will be mounted over ib0. > > > > >> > > > > > > > >> > > > I don't really understand why this occurs. > > > > >> > > > > > > > >> > > > OS: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > > > > >> > > > CentOS Linux release 7.5.1804 (Core) > > > > >> > > > > > > > >> > > > Here's the network script: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# > > > > >> > > > cat /etc/sysconfig/network-scripts/ifcfg-ib0 DEVICE=ib0 > > > > >> > > > BOOTPROTO=static > > > > >> > > > IPADDR=172.16.0.207 > > > > >> > > > NETMASK=255.255.255.0 > > > > >> > > > ONBOOT=yes > > > > >> > > > ZONE=public > > > > >> > > > > > > > >> > > > When I try "ifup" > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# ifup ib0 > > > > >> > > > Error: Connection activation failed: No suitable device > > > > >> > > > found for this connection. > > > > >> > > > > > > > >> > > > The error in syslog: > > > > >> > > > > > > > >> > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source > > > > >> > > > 172.16.0.87 from 172.16.0.49, on dev ib0 > > > > >> > > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > > > > >> > > > [1534951913.7486] audit: op="connection-activate" > > > > >> > > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System > > > > >> > > > ib0" result="fail" reason="No suitable device found for > > > > >> > > > this connection. > > > > >> > > > > > > > >> > > > As you can see media state up: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# ip a > > > > >> > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue > > > > >> > > > state UNKNOWN group default qlen 1000 > > > > >> > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > > > >> > > > inet 127.0.0.1/8<http://127.0.0.1/8><https://urldefense.proofpoint.com/v2/url?u=http-3A__127.0.0.1_8&d=DwICAg&c=…> scope host lo > > > > >> > > > valid_lft forever preferred_lft forever > > > > >> > > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > > > >> > > > mq master ovirtmgmt state UP group default qlen 1000 > > > > >> > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > > > >> > > > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > > >> > > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > > > > >> > > > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > > >> > > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > > > > >> > > > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > > >> > > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > > > > >> > > > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 > > > > >> > > > qdisc pfifo_fast state UNKNOWN group default qlen 1000 > > > > >> > > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > > > > >> > > > inet 169.254.0.2/16<http://169.254.0.2/16><https://urldefense.proofpoint.com/v2/url?u=http-3A__169.254.0.2_16&d=DwICAg…> brd 169.254.255.255 scope global > > > > >> > > > idrac valid_lft forever preferred_lft forever > > > > >> > > > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc > > > > >> > > > mq state UP group default qlen 256 > > > > >> > > > link/infiniband > > > > >> > > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 > > > > >> > > > brd > > > > >> > > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > > > > >> > > > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop > > > > >> > > > state DOWN group default qlen 1000 link/ether > > > > >> > > > 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff 9: br-int: > > > > >> > > > <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > > > >> > > > group default qlen 1000 link/ether 3e:32:e6:66:98:49 brd > > > > >> > > > ff:ff:ff:ff:ff:ff 25: ovirtmgmt: > > > > >> > > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > > > > >> > > > state UP group default qlen 1000 link/ether > > > > >> > > > 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff inet > > > > >> > > > 10.0.0.183/16<http://10.0.0.183/16><https://urldefense.proofpoint.com/v2/url?u=http-3A__10.0.0.183_16&d=DwICAg&…> brd 10.0.255.255 scope global ovirtmgmt > > > > >> > > > valid_lft forever preferred_lft forever 26: > > > > >> > > > genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu > > > > >> > > > 65000 qdisc noqueue master ovs-system state UNKNOWN > > > > >> > > > group default qlen 1000 link/ether aa:32:82:1b:01:d9 brd > > > > >> > > > ff:ff:ff:ff:ff:ff 27: ;vdsmdummy;: <BROADCAST,MULTICAST> > > > > >> > > > mtu 1500 qdisc noop state DOWN group default qlen 1000 > > > > >> > > > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > > > >> > > > > > > > >> > > > The card is FDR: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > > > > >> > > > 01:00.0 Network controller: Mellanox Technologies MT27500 > > > > >> > > > Family [ConnectX-3] > > > > >> > > > Subsystem: Mellanox Technologies Device 0051 > > > > >> > > > > > > > >> > > > Latest OFED driver: > > > > >> > > > > > > > >> > > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > > > >> > > > > > > > >> > > > HCA driver loaded > > > > >> > > > > > > > >> > > > Configured IPoIB devices: > > > > >> > > > ib0 > > > > >> > > > > > > > >> > > > Currently active IPoIB devices: > > > > >> > > > ib0 > > > > >> > > > Configured Mellanox EN devices: > > > > >> > > > > > > > >> > > > Currently active Mellanox devices: > > > > >> > > > ib0 > > > > >> > > > > > > > >> > > > The following OFED modules are loaded: > > > > >> > > > > > > > >> > > > rdma_ucm > > > > >> > > > rdma_cm > > > > >> > > > ib_ipoib > > > > >> > > > mlx4_core > > > > >> > > > mlx4_ib > > > > >> > > > mlx4_en > > > > >> > > > mlx5_core > > > > >> > > > mlx5_ib > > > > >> > > > ib_uverbs > > > > >> > > > ib_umad > > > > >> > > > ib_ucm > > > > >> > > > ib_cm > > > > >> > > > ib_core > > > > >> > > > mlxfw > > > > >> > > > mlx5_fpga_tools > > > > >> > > > > > > > >> > > > I can add an IP to ib0 using "ip addr" though I need > > > > >> > > > Network Manager to work with ib0. > > > > >> > > > > > > > >> > > > > > > > >> > > > Thanks, > > > > >> > > > > > > > >> > > > Douglas Duckworth, MSc, LFCS > > > > >> > > > HPC System Administrator > > > > >> > > > Scientific Computing Unit > > > > >> > > > Weill Cornell Medicine > > > > >> > > > 1300 York - LC-502 > > > > >> > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu><mailto:doug@med.cornell.edu<mailto:doug@med.cornell.edu>> > > > > >> > > > O: 212-746-6305 > > > > >> > > > F: 212-746-8690 > > > > >> > > > > > > >> > > > > > > >> > > > > >> > > > > > > > > > > > >

1 0

Install additional software on ovirt node
by Stefan Wolf 11 Dec '18

11 Dec '18

Hello, if I install on an ovirt node additional software, will it removed after updating the ovirt node or run in to trouble? thx shb

2 1

Re: losing ib0 connection after activating host
by Douglas Duckworth 11 Dec '18

11 Dec '18

Hi Dominik, I have added LACP bond network to all hosts and renamed the Hosted Engine using "/usr/share/ovirt-engine/setup/bin/ovirt-engine-rename." However, I am still missing the option to assign Migration and Management network roles to this new bond. Can you advise where I can find this option? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Fri, Aug 24, 2018 at 11:52 AM Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com>> wrote: On Fri, 24 Aug 2018 09:46:25 -0400 Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: > Sorry, I mean "migration network" for moving live migration traffic. > You have to create a new logical network in "Network > Networks > New" and assign this to ib0 in "Compute > Hosts > hostname > Network Interfaces > Setup Host Networks". After this you can assign a role to this network in "Compute > Clusters > Clustername > Logical Networks > Manage Networks" > FDR infiniband much faster than 1Gb network which currently acts as > migration network, vm network, display network, mgmt network, etc. > > Thanks, > > Douglas Duckworth, MSc, LFCS > HPC System Administrator > Scientific Computing Unit > Weill Cornell Medicine > 1300 York - LC-502 > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> > O: 212-746-6305 > F: 212-746-8690 > > > On Fri, Aug 24, 2018 at 9:36 AM, Dominik Holler <dholler(a)redhat.com<mailto:dholler@redhat.com>> > wrote: > > > On Thu, 23 Aug 2018 13:51:39 -0400 > > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: > > > > > THANKS! > > > > > > ib0 now up with NFS storage back on this hypervisor > > > > > > > Thanks for letting us know. > > > > > Though how do I make it a transfer network? I don't see an > > > option. > > > > I do not understand the meaning of "transfer network". > > The network interface to use for NFS results from the routing > > tables of the host. > > In "Compute > Clusters > Clustername > Logical Networks > Manage > > Networks" network roles for some kind of loads can be assigned, but > > not for NFS access. > > > > > > > Thanks, > > > > > > Douglas Duckworth, MSc, LFCS > > > HPC System Administrator > > > Scientific Computing Unit > > > Weill Cornell Medicine > > > 1300 York - LC-502 > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> > > > O: 212-746-6305 > > > F: 212-746-8690 > > > > > > > > > On Thu, Aug 23, 2018 at 11:12 AM, Douglas Duckworth > > > <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu> > > > > wrote: > > > > > > > Hi Dominik > > > > > > > > Yes, the network-script was created by our Ansible role that > > > > deploys CentOS hosts. It pulls the IP from DNS then templates > > > > the script and copies to host. > > > > > > > > I will try this oVirt step then see if it works! > > > > > > > > Thanks, > > > > > > > > Douglas Duckworth, MSc, LFCS > > > > HPC System Administrator > > > > Scientific Computing Unit > > > > Weill Cornell Medicine > > > > 1300 York - LC-502 > > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> > > > > O: 212-746-6305 > > > > F: 212-746-8690 > > > > > > > > > > > > On Thu, Aug 23, 2018 at 11:09 AM, Dominik Holler > > > > <dholler(a)redhat.com<mailto:dholler@redhat.com>> wrote: > > > > > > > >> Is ifcfg-ib0 created before adding the host? > > > >> Can ib0 be reconfigured using engine, e.g. by > > > >> "Compute > Hosts > hostx > Network Interfaces > Setup Host > > > >> Networks"? If this some kind of self-hosted engine? > > > >> > > > >> On Thu, 23 Aug 2018 09:30:59 -0400 > > > >> Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: > > > >> > > > >> > Here's a link to the files: > > > >> > > > > >> > https://urldefense.proofpoint.com/v2/url?u=https-3A__bit.ly_ > > > >> 2wjZ6Vo&d=DwICAg&c=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu > > > >> 2s&r=2Fzhh_78OGspKQpl_e-CbhH6xUjnRkaqPFUS2wTJ2cw&m=Y25- > > > >> OOvgu58jlC82-fzBeNIpQ7ZscoHznffUhqE6EBM&s=QQXlC9Tisa60TvimyS > > > >> 3BnFDCaDF7VPD8eCzT-Fke-p0&e= > > > >> > > > > >> > Thank you! > > > >> > > > > >> > Thanks, > > > >> > > > > >> > Douglas Duckworth, MSc, LFCS > > > >> > HPC System Administrator > > > >> > Scientific Computing Unit > > > >> > Weill Cornell Medicine > > > >> > 1300 York - LC-502 > > > >> > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> > > > >> > O: 212-746-6305 > > > >> > F: 212-746-8690 > > > >> > > > > >> > > > > >> > On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler > > > >> > <dholler(a)redhat.com<mailto:dholler@redhat.com>> wrote: > > > >> > > > > >> > > Would you please share the vdsm.log and the supervdsm.log > > > >> > > from this host? > > > >> > > > > > >> > > On Wed, 22 Aug 2018 11:36:09 -0400 > > > >> > > Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: > > > >> > > > > > >> > > > Hi > > > >> > > > > > > >> > > > I keep losing ib0 connection on hypervisor after adding > > > >> > > > host to engine. This makes the host not really work > > > >> > > > since NFS will be mounted over ib0. > > > >> > > > > > > >> > > > I don't really understand why this occurs. > > > >> > > > > > > >> > > > OS: > > > >> > > > > > > >> > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > > > >> > > > CentOS Linux release 7.5.1804 (Core) > > > >> > > > > > > >> > > > Here's the network script: > > > >> > > > > > > >> > > > [root@ovirt-hv2 ~]# > > > >> > > > cat /etc/sysconfig/network-scripts/ifcfg-ib0 DEVICE=ib0 > > > >> > > > BOOTPROTO=static > > > >> > > > IPADDR=172.16.0.207 > > > >> > > > NETMASK=255.255.255.0 > > > >> > > > ONBOOT=yes > > > >> > > > ZONE=public > > > >> > > > > > > >> > > > When I try "ifup" > > > >> > > > > > > >> > > > [root@ovirt-hv2 ~]# ifup ib0 > > > >> > > > Error: Connection activation failed: No suitable device > > > >> > > > found for this connection. > > > >> > > > > > > >> > > > The error in syslog: > > > >> > > > > > > >> > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source > > > >> > > > 172.16.0.87 from 172.16.0.49, on dev ib0 > > > >> > > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > > > >> > > > [1534951913.7486] audit: op="connection-activate" > > > >> > > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System > > > >> > > > ib0" result="fail" reason="No suitable device found for > > > >> > > > this connection. > > > >> > > > > > > >> > > > As you can see media state up: > > > >> > > > > > > >> > > > [root@ovirt-hv2 ~]# ip a > > > >> > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue > > > >> > > > state UNKNOWN group default qlen 1000 > > > >> > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > > >> > > > inet 127.0.0.1/8<http://127.0.0.1/8> scope host lo > > > >> > > > valid_lft forever preferred_lft forever > > > >> > > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > > >> > > > mq master ovirtmgmt state UP group default qlen 1000 > > > >> > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > > > >> > > > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > >> > > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > > > >> > > > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > >> > > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > > > >> > > > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 > > > >> > > > qdisc mq state DOWN group default qlen 1000 > > > >> > > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > > > >> > > > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 > > > >> > > > qdisc pfifo_fast state UNKNOWN group default qlen 1000 > > > >> > > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > > > >> > > > inet 169.254.0.2/16<http://169.254.0.2/16> brd 169.254.255.255 scope global > > > >> > > > idrac valid_lft forever preferred_lft forever > > > >> > > > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc > > > >> > > > mq state UP group default qlen 256 > > > >> > > > link/infiniband > > > >> > > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 > > > >> > > > brd > > > >> > > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > > > >> > > > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop > > > >> > > > state DOWN group default qlen 1000 link/ether > > > >> > > > 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff 9: br-int: > > > >> > > > <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > > >> > > > group default qlen 1000 link/ether 3e:32:e6:66:98:49 brd > > > >> > > > ff:ff:ff:ff:ff:ff 25: ovirtmgmt: > > > >> > > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > > > >> > > > state UP group default qlen 1000 link/ether > > > >> > > > 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff inet > > > >> > > > 10.0.0.183/16<http://10.0.0.183/16> brd 10.0.255.255 scope global ovirtmgmt > > > >> > > > valid_lft forever preferred_lft forever 26: > > > >> > > > genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu > > > >> > > > 65000 qdisc noqueue master ovs-system state UNKNOWN > > > >> > > > group default qlen 1000 link/ether aa:32:82:1b:01:d9 brd > > > >> > > > ff:ff:ff:ff:ff:ff 27: ;vdsmdummy;: <BROADCAST,MULTICAST> > > > >> > > > mtu 1500 qdisc noop state DOWN group default qlen 1000 > > > >> > > > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > > >> > > > > > > >> > > > The card is FDR: > > > >> > > > > > > >> > > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > > > >> > > > 01:00.0 Network controller: Mellanox Technologies MT27500 > > > >> > > > Family [ConnectX-3] > > > >> > > > Subsystem: Mellanox Technologies Device 0051 > > > >> > > > > > > >> > > > Latest OFED driver: > > > >> > > > > > > >> > > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > > >> > > > > > > >> > > > HCA driver loaded > > > >> > > > > > > >> > > > Configured IPoIB devices: > > > >> > > > ib0 > > > >> > > > > > > >> > > > Currently active IPoIB devices: > > > >> > > > ib0 > > > >> > > > Configured Mellanox EN devices: > > > >> > > > > > > >> > > > Currently active Mellanox devices: > > > >> > > > ib0 > > > >> > > > > > > >> > > > The following OFED modules are loaded: > > > >> > > > > > > >> > > > rdma_ucm > > > >> > > > rdma_cm > > > >> > > > ib_ipoib > > > >> > > > mlx4_core > > > >> > > > mlx4_ib > > > >> > > > mlx4_en > > > >> > > > mlx5_core > > > >> > > > mlx5_ib > > > >> > > > ib_uverbs > > > >> > > > ib_umad > > > >> > > > ib_ucm > > > >> > > > ib_cm > > > >> > > > ib_core > > > >> > > > mlxfw > > > >> > > > mlx5_fpga_tools > > > >> > > > > > > >> > > > I can add an IP to ib0 using "ip addr" though I need > > > >> > > > Network Manager to work with ib0. > > > >> > > > > > > >> > > > > > > >> > > > Thanks, > > > >> > > > > > > >> > > > Douglas Duckworth, MSc, LFCS > > > >> > > > HPC System Administrator > > > >> > > > Scientific Computing Unit > > > >> > > > Weill Cornell Medicine > > > >> > > > 1300 York - LC-502 > > > >> > > > E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> > > > >> > > > O: 212-746-6305 > > > >> > > > F: 212-746-8690 > > > >> > > > > > >> > > > > > >> > > > >> > > > > > > > >

2 1

Re: oVirt Node 4.2.7 upgrade fails with broken dependencies ?
by Douglas Duckworth 10 Dec '18

10 Dec '18

MSG: Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 Available: nbdkit-1.2.6-1.el7.x86_64 (base) nbdkit(x86-64) = 1.2.6-1.el7 Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) nbdkit(x86-64) = 1.2.6-1.el7_6.2 Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) nbdkit(x86-64) = 1.2.7-2.el7 Cannot upload enabled repos report, is this client registered? 2018-12-10 16:09:40,983 p=22603 u=ovirt | PLAY RECAP ********************************************************************* 2018-12-10 16:09:40,983 p=22603 u=ovirt | ovirt-hv3.pbtech : ok=1 changed=0 unreachable=0 failed=1 Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Nov 14, 2018 at 11:09 AM Sandro Bonazzola <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>> wrote: Il giorno mer 14 nov 2018 alle ore 16:27 Jayme <jaymef(a)gmail.com<mailto:jaymef@gmail.com>> ha scritto: I am having the same issue as well attempting to update oVirt node to latest. Please manually disable EPEL repository for now. We are checking with CentOS OpsTools SIG if we can get an updated collectd there. On Wed, Nov 14, 2018 at 11:07 AM Giulio Casella <giulio(a)di.unimi.it<mailto:giulio@di.unimi.it>> wrote: It's due to a update of collectd in epel, but ovirt repos contain also collectd-write_http and collectd-disk (still not updated). We have to wait for ovirt guys to release updated versions in ovirt-4.2-centos-opstools repo. I think it'll be a matter of few days. Ciao, Giulio Il 14/11/2018 13:51, Rogério Ceni Coelho ha scritto: > Ovirt Engine with same problem. > > [root@nscovirt42prdpoa ~]# yum update > Loaded plugins: fastestmirror, versionlock > Loading mirror speeds from cached hostfile > * base: centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…> <http://centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…>> > * epel: mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…> <http://mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…>> > * extras: centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…> <http://centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…>> > * ovirt-4.2: mirror.linux.duke.edu<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.linux.duke.edu&d…> <http://mirror.linux.duke.edu<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.linux.duke.edu&d…>> > * ovirt-4.2-epel: mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…> <http://mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…>> > * updates: centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…> <http://centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…>> > Resolving Dependencies > --> Running transaction check > ---> Package collectd.x86_64 0:5.8.0-6.1.el7 will be updated > --> Processing Dependency: collectd(x86-64) = 5.8.0-6.1.el7 for package: > collectd-disk-5.8.0-6.1.el7.x86_64 > --> Processing Dependency: collectd(x86-64) = 5.8.0-6.1.el7 for package: > collectd-write_http-5.8.0-6.1.el7.x86_64 > ---> Package collectd.x86_64 0:5.8.1-1.el7 will be an update > ---> Package collectd-postgresql.x86_64 0:5.8.0-6.1.el7 will be updated > ---> Package collectd-postgresql.x86_64 0:5.8.1-1.el7 will be an update > ---> Package ovirt-engine-extensions-api-impl.noarch 0:4.2.7.4-1.el7 > will be updated > ---> Package ovirt-engine-extensions-api-impl.noarch 0:4.2.7.5-1.el7 > will be an update > ---> Package ovirt-engine-lib.noarch 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-lib.noarch 0:4.2.7.5-1.el7 will be an update > ---> Package ovirt-engine-setup.noarch 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-setup.noarch 0:4.2.7.5-1.el7 will be an update > ---> Package ovirt-engine-setup-base.noarch 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-setup-base.noarch 0:4.2.7.5-1.el7 will be an > update > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:4.2.7.5-1.el7 will be an update > ---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch > 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch > 0:4.2.7.5-1.el7 will be an update > ---> Package ovirt-engine-setup-plugin-vmconsole-proxy-helper.noarch > 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-setup-plugin-vmconsole-proxy-helper.noarch > 0:4.2.7.5-1.el7 will be an update > ---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch > 0:4.2.7.4-1.el7 will be updated > ---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch > 0:4.2.7.5-1.el7 will be an update > ---> Package ovirt-engine-vmconsole-proxy-helper.noarch 0:4.2.7.4-1.el7 > will be updated > ---> Package ovirt-engine-vmconsole-proxy-helper.noarch 0:4.2.7.5-1.el7 > will be an update > ---> Package ovirt-engine-websocket-proxy.noarch 0:4.2.7.4-1.el7 will be > updated > ---> Package ovirt-engine-websocket-proxy.noarch 0:4.2.7.5-1.el7 will be > an update > ---> Package ovirt-release42.noarch 0:4.2.7-1.el7 will be updated > ---> Package ovirt-release42.noarch 0:4.2.7.1-1.el7 will be an update > --> Finished Dependency Resolution > Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > Requires: collectd(x86-64) = 5.8.0-6.1.el7 > Removing: collectd-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-6.1.el7 > Updated By: collectd-5.8.1-1.el7.x86_64 (epel) > collectd(x86-64) = 5.8.1-1.el7 > Available: collectd-5.7.2-1.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-1.el7 > Available: collectd-5.7.2-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-3.el7 > Available: collectd-5.8.0-2.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-2.el7 > Available: collectd-5.8.0-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-3.el7 > Available: collectd-5.8.0-5.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-5.el7 > Error: Package: collectd-disk-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > Requires: collectd(x86-64) = 5.8.0-6.1.el7 > Removing: collectd-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-6.1.el7 > Updated By: collectd-5.8.1-1.el7.x86_64 (epel) > collectd(x86-64) = 5.8.1-1.el7 > Available: collectd-5.7.2-1.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-1.el7 > Available: collectd-5.7.2-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-3.el7 > Available: collectd-5.8.0-2.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-2.el7 > Available: collectd-5.8.0-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-3.el7 > Available: collectd-5.8.0-5.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-5.el7 > You could try using --skip-broken to work around the problem > You could try running: rpm -Va --nofiles --nodigest > [root@nscovirt42prdpoa ~]# > > Em qua, 14 de nov de 2018 às 10:07, Rogério Ceni Coelho > <rogeriocenicoelho(a)gmail.com<mailto:rogeriocenicoelho@gmail.com> <mailto:rogeriocenicoelho@gmail.com<mailto:rogeriocenicoelho@gmail.com>>> escreveu: > > Hi all ! > > Broken dependencies ? > > [root@nscovirtkvm41prdpoa ~]# yum update > Loaded plugins: enabled_repos_upload, fastestmirror, package_upload, > product-id, search-disabled-repos, subscription-manager, vdsmupgrade > This system is not registered with an entitlement server. You can > use subscription-manager to register. > Loading mirror speeds from cached hostfile > * base: mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…> <http://mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…>> > * epel: mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…> <http://mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…>> > * extras: centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…> <http://centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…>> > * ovirt-4.2: www.gtlib.gatech.edu<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gtlib.gatech.edu&d=…> <http://www.gtlib.gatech.edu<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gtlib.gatech.edu&d=…>> > * ovirt-4.2-epel: mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…> <http://mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…>> > * updates: mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…> <http://mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…>> > Resolving Dependencies > --> Running transaction check > ---> Package collectd.x86_64 0:5.8.0-6.1.el7 will be updated > --> Processing Dependency: collectd(x86-64) = 5.8.0-6.1.el7 for > package: collectd-disk-5.8.0-6.1.el7.x86_64 > --> Processing Dependency: collectd(x86-64) = 5.8.0-6.1.el7 for > package: collectd-write_http-5.8.0-6.1.el7.x86_64 > ---> Package collectd.x86_64 0:5.8.1-1.el7 will be an update > ---> Package collectd-netlink.x86_64 0:5.8.0-6.1.el7 will be updated > ---> Package collectd-netlink.x86_64 0:5.8.1-1.el7 will be an update > ---> Package collectd-virt.x86_64 0:5.8.0-6.1.el7 will be updated > ---> Package collectd-virt.x86_64 0:5.8.1-1.el7 will be an update > ---> Package ovirt-hosted-engine-setup.noarch 0:2.2.30-1.el7 will be > updated > ---> Package ovirt-hosted-engine-setup.noarch 0:2.2.32-1.el7 will be > an update > --> Finished Dependency Resolution > Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > Requires: collectd(x86-64) = 5.8.0-6.1.el7 > Removing: collectd-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-6.1.el7 > Updated By: collectd-5.8.1-1.el7.x86_64 (epel) > collectd(x86-64) = 5.8.1-1.el7 > Available: collectd-5.7.2-1.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-1.el7 > Available: collectd-5.7.2-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-3.el7 > Available: collectd-5.8.0-2.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-2.el7 > Available: collectd-5.8.0-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-3.el7 > Available: collectd-5.8.0-5.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-5.el7 > Error: Package: collectd-disk-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > Requires: collectd(x86-64) = 5.8.0-6.1.el7 > Removing: collectd-5.8.0-6.1.el7.x86_64 > (@ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-6.1.el7 > Updated By: collectd-5.8.1-1.el7.x86_64 (epel) > collectd(x86-64) = 5.8.1-1.el7 > Available: collectd-5.7.2-1.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-1.el7 > Available: collectd-5.7.2-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.7.2-3.el7 > Available: collectd-5.8.0-2.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-2.el7 > Available: collectd-5.8.0-3.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-3.el7 > Available: collectd-5.8.0-5.el7.x86_64 > (ovirt-4.2-centos-opstools) > collectd(x86-64) = 5.8.0-5.el7 > You could try using --skip-broken to work around the problem > You could try running: rpm -Va --nofiles --nodigest > Uploading Enabled Repositories Report > Loaded plugins: fastestmirror, product-id, subscription-manager > This system is not registered with an entitlement server. You can > use subscription-manager to register. > Cannot upload enabled repos report, is this client registered? > [root@nscovirtkvm41prdpoa ~]# yum repolist > Loaded plugins: enabled_repos_upload, fastestmirror, package_upload, > product-id, search-disabled-repos, subscription-manager, vdsmupgrade > This system is not registered with an entitlement server. You can > use subscription-manager to register. > Loading mirror speeds from cached hostfile > * base: mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…> <http://mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…>> > * epel: mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…> <http://mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…>> > * extras: centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…> <http://centos.brnet.net.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__centos.brnet.net.br&d=D…>> > * ovirt-4.2: www.gtlib.gatech.edu<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gtlib.gatech.edu&d=…> <http://www.gtlib.gatech.edu<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gtlib.gatech.edu&d=…>> > * ovirt-4.2-epel: mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…> <http://mirror.ci.ifes.edu.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ci.ifes.edu.br&d…>> > * updates: mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…> <http://mirror.ufscar.br<https://urldefense.proofpoint.com/v2/url?u=http-3A__mirror.ufscar.br&d=DwMF…>> > repo id > repo name > status > base/7/x86_64 > CentOS-7 - Base > 9,911 > centos-sclo-rh-release/x86_64 > CentOS-7 - SCLo rh > 8,099 > epel/x86_64 > Extra Packages for Enterprise Linux 7 - x86_64 > 12,708 > extras/7/x86_64 > CentOS-7 - Extras > 434 > ovirt-4.2/7 > Latest oVirt 4.2 Release > 2,439 > ovirt-4.2-centos-gluster312/x86_64 > CentOS-7 - Gluster 3.12 > 262 > ovirt-4.2-centos-opstools/x86_64 > CentOS-7 - OpsTools - release > 666 > ovirt-4.2-centos-ovirt42/x86_64 > CentOS-7 - oVirt 4.2 > 582 > ovirt-4.2-centos-qemu-ev/x86_64 > CentOS-7 - QEMU EV > 63 > ovirt-4.2-epel/x86_64 > Extra Packages for Enterprise Linux 7 - x86_64 > 12,708 > ovirt-4.2-virtio-win-latest > virtio-win builds roughly matching what will be shipped in upcoming > RHEL 38 > updates/7/x86_64 > CentOS-7 - Updates > 1,614 > zabbix/7/x86_64 > Zabbix Official Repository - x86_64 > 183 > zabbix-non-supported/x86_64 > Zabbix Official Repository non-supported - x86_64 > 4 > repolist: 49,711 > Uploading Enabled Repositories Report > Loaded plugins: fastestmirror, product-id, subscription-manager > This system is not registered with an entitlement server. You can > use subscription-manager to register. > Cannot upload enabled repos report, is this client registered? > [root@nscovirtkvm41prdpoa ~]# > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6L7GNIJKKPSOP…<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…> > _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZO64SNCLGGVJ5…<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…> _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CKHIBEZDZEASP…<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…> -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.redhat.com_&d=DwMF…> sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> [https://www.redhat.com/files/brand/email/sig-redhat.png]<https://urldefense.proofpoint.com/v2/url?u=https-3A__red.ht_sig&d=DwMFaQ&c=…>

1 0

LVM vs DF discrepancy usage (with NFS)
by Alexis Grillon 10 Dec '18

10 Dec '18

Dear All, i follow here the suggestion of Tal and share this problem (for which there's a workaround) with you, hoping someone can identify something which can explain this problem. . Settings : We work mostly on HP (ProLiant DL380 Gen9, DL380e Gen8, DL180 G6), with an ovirt cluster DL180 G6. On the storage side, we use the host harddrive mount in NFS (i know it's not the "by the books optimal settings"). . Installation : Each host is installed with the node iso. Harddrive are not SSD and are in RAID5 (physical or logical) Each harddrive has a standard oVirt node install auto partitionning, except for one thing, we reduce the / mount point to make a new partition in XFS for the data storage mount point (the partition is inside LVM in our case) . The problem : We experienced on all of this hosts huge discrepancy between the LVS command and DF on usage of the different partition. (sometimes up to a 90% difference !) Spoiler alert, DF is right, LVM is wrong. I think (but i might be wrong), that when we delete -in ovirt- a lot of data on the drive, LVM doesn't get all the data about that. . Workarounds : By speaking about with lvm dev, we found a workaround : fstrim who force LVM to check if data has been deleted or not. Another solution is to use a partition for data which is not a part of LVM, that works well too :) One last thing : we saw this on data partition of our hosts, but it's not impossible it might the case on the ovirt partition too (the current discrepancy might be normal) If someone has an idea of what we did wrong, or if there's a good reason for this to happened... Thank you. -- regards, Alexis Grillon Pôle Humanités Numériques, Outils, Méthodes et Analyse de Données Maison européenne des sciences de l'homme et de la société MESHS - Lille Nord de France / CNRS tel. +33 (0)3 20 12 58 57 | alexis.grillon(a)meshs.fr www.meshs.fr | 2, rue des Canonniers 59000 Lille ----------------------------------------------------------------- GPG fingerprint AC37 4C4B 6308 975B 77D4 772F 214F 1E97 6C08 CD11

2 1

VDSM issues.
by Nicholas Vaughan 10 Dec '18

10 Dec '18

Hi, We have 4 hosts on Version 4.2.1.7-1.el7.centos, but we have got an issue with vdsm on our SPM which is causing some issues and we cannot migrate any VM's from that host. If I run 'vdsm-client Host getAllTasksStatuses' on the host, it returns 4 tasks, message: running job 1 of 1, code:0, ........ taskState:running for all 4 tasks. However we have no operations in the engine that should be running (not a hosted engine), just a stuck task that logs every minute or so 'Clearing asynchronous task Unknown that started at Thu Dec 06 14:42:03 GMT 2018'. If I try to manually stop the task, 'vdsm-client Task stop taskID=' we get 'code=411, message=Task is aborted: u'task guid' - code 411'. So then If I try and clean the task it can't because its in a running state: vdsm-client: Command Task.clear with args {'taskID': 'task guid'} failed: (code=410, message=Operation is not allowed in this task state: ("can't clean in state running",)) Attached is part of the (sanitised) VDSM log that is recurring. VDSM version is: vdsm-client-4.20.17-1.el7.centos.noarch Does anyone have any ideas other than shutting down all the VM's on that host and restarting it? Not sure if I can restart the VDSM service with VM's running? Thanks, Nick

1 0

To much hosts in this cluster
by Stefan Wolf 10 Dec '18

10 Dec '18

Hello, i had 3 hosts with ovirt running, with one of this 3 host i had problems during boot up. I decied to remove the host from the cluster. Now i ve two hosts But if I take a look at Hosted Engine in cockpit i see all three hosts Why ist he kvm380 not removed? How can I remove it? Thx shb

2 2

Email notification test
by Alex K 10 Dec '18

10 Dec '18

Hi all, Does ovirt provide a way to test the email SMTP settings for email notifications? (apart from telnet) Thanx, Alex

1 0

Gluster hooks
by Alex K 10 Dec '18

10 Dec '18

Hi all, I see the following gluster hooks at ovirt cluster enabled: [image: image.png] What is their purpose? Do they need to be all enabled? Thanx, Alex

1 0

Try to add Host to cluster: Command returned failure code 1 during SSH session
by Stefan Wolf 10 Dec '18

10 Dec '18

Hello, I try to add a new installed ovirt node and get the error message during adding to cluster Host kvm380 installation failed. Command returned failure code 1 during SSH session 'root(a)kvm380.durchhalten.intern'. Maybe someone can help me Thx Here is the logfile 2018-12-09 14:48:23,262+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Initializing. 2018-12-09 14:48:23,414+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Environment setup. 2018-12-09 14:48:23,479+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Environment packages setup. 2018-12-09 14:48:26,194+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Programs detection. 2018-12-09 14:48:26,373+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Environment customization. 2018-12-09 14:48:26,842+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Kdump supported. 2018-12-09 14:48:27,123+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Logs at host located at: '/tmp/ovirt-host-deploy-20181209144822-hbil3q.log'. 2018-12-09 14:48:27,188+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Host is hypervisor. 2018-12-09 14:48:27,192+01 INFO [org.ovirt.engine.core.bll.hostdeploy.VdsDeployVdsmUnit] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] Host kvm380.durchhalten.intern reports unique id 31323436-3530-5a43-3233-303430374a4e 2018-12-09 14:48:27,208+01 INFO [org.ovirt.engine.core.bll.hostdeploy.VdsDeployVdsmUnit] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] Assigning unique id 31323436-3530-5a43-3233-303430374a4e to Host kvm380.durchhalten.intern 2018-12-09 14:48:27,436+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Setup validation. 2018-12-09 14:48:27,825+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during installation of Host kvm380: Failed to execute stage 'Setup validation': Cannot resolve kdump destination address 'ovirt.durchhalten.intern'. 2018-12-09 14:48:27,827+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Clean up. 2018-12-09 14:48:27,830+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Pre-termination. 2018-12-09 14:48:27,874+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20181209144827-kvm380.d urchhalten.intern-f097f8b0-ee35-4c08-a416-1f0427dd2e9e.log'. 2018-12-09 14:48:28,295+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_IN_PROGRESS(509), Installing Host kvm380. Stage: Termination. 2018-12-09 14:48:28,389+01 ERROR [org.ovirt.engine.core.uutils.ssh.SSHDialog] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] SSH error running command root(a)kvm380.durchhalten.intern:'umask 0077; MYTMP="$(TMPDIR="${OVIRT_TMPDIR}" mktemp -d -t ovirt-XXXXXXXXXX)"; trap "chmod -R u+rwX \"${MYTMP}\" > /dev/null 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; tar --warning=no-timestamp -C "${MYTMP}" -x && "${MYTMP}"/ovirt-host-deploy DIALOG/dialect=str:machine DIALOG/customization=bool:True': IOException: Command returned failure code 1 during SSH session 'root(a)kvm380.durchhalten.intern' 2018-12-09 14:48:28,389+01 ERROR [org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] Error during host kvm380.durchhalten.intern install 2018-12-09 14:48:28,391+01 ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] Host installation failed for host 'c06e2a1b-7d94-45f7-aaab-21da6703d6fc', 'kvm380': Command returned failure code 1 during SSH session 'root(a)kvm380.durchhalten.intern' 2018-12-09 14:48:28,393+01 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] START, SetVdsStatusVDSCommand(HostName = kvm380, SetVdsStatusVDSCommandParameters:{hostId='c06e2a1b-7d94-45f7-aaab-21da6703d6 fc', status='InstallFailed', nonOperationalReason='NONE', stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 29ddff69 2018-12-09 14:48:28,395+01 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] FINISH, SetVdsStatusVDSCommand, log id: 29ddff69 2018-12-09 14:48:28,414+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] EVENT_ID: VDS_INSTALL_FAILED(505), Host kvm380 installation failed. Command returned failure code 1 during SSH session 'root(a)kvm380.durchhalten.intern'. 2018-12-09 14:48:28,418+01 INFO [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-1942) [f097f8b0-ee35-4c08-a416-1f0427dd2e9e] Lock freed to object 'EngineLock:{exclusiveLocks='[c06e2a1b-7d94-45f7-aaab-21da6703d6fc=VDS]', sharedLocks=''}'

3 2

Re: ovirt 4.2.7.1 fails to deploy hosted engine on GlusterFS
by Johannes Jurgens Loots 09 Dec '18

09 Dec '18

I had this issue this week as well. When asked about the glusterfs that you self provisioned you stated "ovirt1.localdomain:/gluster_bricks/engine” So I am new to gluster but as a client of gluster you can only refer to it via volume name. host:/<volume name> Hence maybe try ovirt1.localdomain:/engine. That did the trick for me. Hope this helps. Cost me a week. Jurie

1 0