- Users - oVirt List Archives

Can't install windows guest
by bardos.matyas＠techcentral.hu 18 Nov '18

18 Nov '18

Dear list, I am new in ovirt, and I have a problem, which I can’t solve with google. I am not able to install windows guests, because they can’t find they disk. I have already many linux guests running, so generally everything is working fine. I try with virtio-scsi disks. What I already tried: - While the installation process I changed the disk to the virtio driver disk (downloaded from fedora project), I try to load scsi drivers, and windows still can’t find the disk - I tried with virtio floppy (run once) but the floppy is not visible in windows select menu - I added the drivers to windows installer wim, but disks still not visible - I tried to add ide drive, but it is not visible either (I have disabled virtio scsi under resource allocation too, without luck) - tried windows 7 and 2016 My nodes are: oVirt Node 4.2.1.1 I use local disks but via nfs, so i share the local disk via nfs. Do you have any idea what could I try. Any clue are welcome, because I’m stuck… Thank you in advance! Regards!

3 5

Unable to import engine
by Alex K 18 Nov '18

18 Nov '18

Hi all, I had a setup with ovirt 4.2.0 which at some point the engine stopped responding, due to some split brain issues. Since was not able to resolve the split brain, I proceeded to redeploy the engine. The steps I followed: 1. upgrade servers (yum update) 2. ran ovirt-hosted-engine-cleanup 3. deployed engine (now 4.2.7) The deploy was successful and was able to add a new data domain. The issue is that at this point I would expect the engine storage domain and VM to be automatically imported, but it is not. At HA agent logs at the server I see: MainThread::INFO::2018-11-17 12:55:51,856::states::444::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost MainThread::WARNING::2018-11-17 12:55:52,145::ovf_store::140::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2018-11-17 12:55:52,146::config_ovf::84::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config.vm::(_get_vm_conf_content_from_ovf_store) Unable to identify the OVF_STORE volume, falling back to initial vm.conf. Please ensure you already added your first data domain for regular VMs MainThread::INFO::2018-11-17 12:55:52,246::hosted_engine::491::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state EngineUp (score: 3400) While at engine.log of engine VM I see: 2018-11-17 12:47:14,748Z INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [] VM '88dacb07-45f1-4bc1-80a0-9434d530eaaa' was discovered as 'Up' on VDS '6eff2018-516d-4af1-807d-ecc31d024f4d'(v0.maya) 2018-11-17 12:47:14,773Z INFO [org.ovirt.engine.core.bll.AddUnmanagedVmsCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [51c593c1] Running command: AddUnmanagedVmsCommand internal: true. 2018-11-17 12:47:14,775Z INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DumpXmlsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [51c593c1] START, DumpXmlsVDSCommand(HostName = v0.maya, Params:{hostId='6eff2018-516d-4af1-807d-ecc31d024f4d', vmIds='[88dacb07-45f1-4bc1-80a0-9434d530eaaa]'}), log id: 44bb4e0a 2018-11-17 12:47:14,779Z INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DumpXmlsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [51c593c1] FINISH, DumpXmlsVDSCommand, return: {88dacb07-45f1-4bc1-80a0-9434d530eaaa=<domain type='kvm' id='7'> ... <some kind of XML> ... 2018-11-17 12:47:14,793Z WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [51c593c1] null architecture type, replacing with x86_64, VM [HostedEngine] Sth is causing engine not not getting imported. Tried to run hosted-engine –reinitialize-lockspace, since I was getting some lockspace errors, but no change. Any idea what could be causing this? I am left with little time due to the site being production. Any idea is appreciated. Thanx, Alex

2 6

Script for backing up VMs
by mail＠karloluiten.nl 18 Nov '18

18 Nov '18

Hi All, I love oVirt, have been running it for some weeks now. I have read the wiki page on backups, and have set up an engine backup. The backing up of VMs is where it gets more tricky. There must be more people already doing this, but I just would like some script that takes my vm name as an argument, and saves a backup (snapshot) of the vm. If someone could help me, that would be awesome. If there is an even easier way to do it (copying files on the FS itself?), that could be even better. I know this question has been asked multiple times over the last years, but I can not find an actual, working, documented way of doing this. Thanks so much, and thanks for creating/maintaining/fixing/building oVirt! Karlo

4 4

Re: Engine ISO Uploader - SSL Peer Not Trusted
by Nir Soffer 17 Nov '18

17 Nov '18

On Sat, Nov 17, 2018, 02:45 Shawn Weeks <sweeks(a)weeksconsulting.us wrote: > Trying to upload an iso using engine-iso-uploader on a hosted-engine > instance and I’m getting an SSL Error. I followed the directions at > https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL/ to > setup SSL and am able to login to the Admin console without an issue. Also > checked that things like curl recognize the CA correctly. Not sure where > engine-iso-uploader is getting it’s trust store. > > > > [root@cloud ~]# engine-iso-uploader list > > Please provide the REST API password for the admin@internal oVirt Engine > user (CTRL+D to abort): > > ERROR: Unable to connect to REST API at > https://cloud.dev.example.com:443/ovirt-engine/api due to SDK error > > Message: Error while sending HTTP request: (60, "Peer's certificate issuer > has been marked as not trusted by the user.") > > > > What am I missing? > If you ate using 4.2, you can upload iso files to data domains. You can upload directly from the UI: 1. Open storage > disks 2. Click Upload > Start 3. Select file and fill in the form For faster upload or automation, you can use the SDK. See this example code: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… With some configuration changes you can use this as command line tool for uploading iso or other images. Nir > >

2 1

Increasing an Existing iSCSI Storage Domain
by Brian Wilson 17 Nov '18

17 Nov '18

My Question is not so much in how to do this as i have been able to take an existing Storage domain and increase its size with adding another LUN. My Question is how will a failure of one of the LUNs be handled by the engine and how will it effect the VMs running on it. Let me setup an example to better illustrate. Ovirt Node has ISCSI storage domain comprised of 1 Lun from 1 ISCSI based SAN and 2 LUNs from another. So a total of 3 Luns making up the one storage domain. Now there is an issue with the Storage array providing the single lun. What happens? How do you know what VMs are running on each extent? TIA Brian

2 1

Re: Reg: Virt-viewer for MAC
by Karli Sjöberg 17 Nov '18

17 Nov '18

1 0

Hyperconverged Ovirt + ZFS
by Thomas Simmons 17 Nov '18

17 Nov '18

Hello All, I recently took a new job in a RedHat shop and I'd like to move all of my homelab systems to RedHat upstream products to better align with what I manage at work. I had a "custom" (aka - hacked together) 3-node Hyperconverged XenServer cluster and would like to get this moved over to Ovirt (I'm currently testing with 4.2.7). Unfortunately, my storage is limited to software RAID with a 128GB SSD for cache. If at all possible, I would prefer to use ZFS (RAIDZ+ZIL+L2ARC) instead of MD RAID + lvmcache, however I'm not able to get this working and I'm not sure why. My ZFS and Gluster configuration is working - at least where I can manually mount all of my gluster volumes from all of my nodes, however, hosted-engine --deploy fails. I understand this isn't an out of the box configuration for Ovirt, however I see no reason why this shouldn't work. I would think this would be no different than using any other Gluster volume for the engine datastore, Am I missing something that would prevent this from working? [ INFO ] TASK [Add glusterfs storage domain] [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Storage Domain target is unsupported]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "deprecations": [{"msg": "The 'ovirt_storage_domains' module is being renamed 'ovirt_storage_domain'", "version": 2.8}], "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Storage Domain target is unsupported]\". HTTP response code is 400."} Even though it fails, it appears to have mounted and written __DIRECT_IO_TEST__ to my Gluster volume: [root@vmh1 ~]# mount -t glusterfs localhost:/engine /mnt/engine/ [root@vmh1 ~]# ls /mnt/engine/ __DIRECT_IO_TEST__ If I cancel and try to run the deploy again, I get a different failure: [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Error creating a storage domain]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "deprecations": [{"msg": "The 'ovirt_storage_domains' module is being renamed 'ovirt_storage_domain'", "version": 2.8}], "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Error creating a storage domain]\". HTTP response code is 400."} Gluster seems ok... [root@vmh1 /]# gluster volume info engine Volume Name: engine Type: Replicate Volume ID: 2e34f8f5-0129-4ba5-983f-1eb5178deadc Status: Started Snapshot Count: 0 Number of Bricks: 1 x 3 = 3 Transport-type: tcp Bricks: Brick1: vmh1-ib:/zpool1/engine Brick2: vmh2-ib:/zpool1/engine Brick3: vmh3-ib:/zpool1/engine Options Reconfigured: transport.address-family: inet nfs.disable: on performance.client-io-threads: off ZFS looks good too... [root@vmh1 ~]# ansible ovirthosts -m shell -a 'zpool status' -b vmh1 | CHANGED | rc=0 >> pool: zpool1 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zpool1 ONLINE 0 0 0 sdc ONLINE 0 0 0 sdd ONLINE 0 0 0 sde ONLINE 0 0 0 logs sdb2 ONLINE 0 0 0 cache sdb1 ONLINE 0 0 0 errors: No known data errors vmh3 | CHANGED | rc=0 >> pool: zpool1 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zpool1 ONLINE 0 0 0 sdc ONLINE 0 0 0 sdd ONLINE 0 0 0 sde ONLINE 0 0 0 logs sdb2 ONLINE 0 0 0 cache sdb1 ONLINE 0 0 0 errors: No known data errors vmh2 | CHANGED | rc=0 >> pool: zpool1 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zpool1 ONLINE 0 0 0 sdc ONLINE 0 0 0 sdd ONLINE 0 0 0 sde ONLINE 0 0 0 logs sdb2 ONLINE 0 0 0 cache sdb1 ONLINE 0 0 0 errors: No known data errors Permissions seem ok [root@vmh1 ~]# ansible ovirthosts -m shell -a 'ls -n /zpool1' -b vmh3 | CHANGED | rc=0 >> total 2 drwxr-xr-x. 3 36 36 3 Nov 15 04:56 data drwxr-xr-x. 3 36 36 4 Nov 15 06:31 engine drwxr-xr-x. 3 36 36 3 Nov 15 04:56 iso vmh1 | CHANGED | rc=0 >> total 2 drwxr-xr-x. 3 36 36 3 Nov 15 04:56 data drwxr-xr-x. 3 36 36 4 Nov 15 06:31 engine drwxr-xr-x. 3 36 36 3 Nov 15 04:56 iso vmh2 | CHANGED | rc=0 >> total 2 drwxr-xr-x. 3 36 36 3 Nov 15 04:56 data drwxr-xr-x. 3 36 36 4 Nov 15 06:31 engine drwxr-xr-x. 3 36 36 3 Nov 15 04:56 iso

3 5

Engine ISO Uploader - SSL Peer Not Trusted
by Shawn Weeks 17 Nov '18

17 Nov '18

Trying to upload an iso using engine-iso-uploader on a hosted-engine instance and I'm getting an SSL Error. I followed the directions at https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL/ to setup SSL and am able to login to the Admin console without an issue. Also checked that things like curl recognize the CA correctly. Not sure where engine-iso-uploader is getting it's trust store. [root@cloud ~]# engine-iso-uploader list Please provide the REST API password for the admin@internal oVirt Engine user (CTRL+D to abort): ERROR: Unable to connect to REST API at https://cloud.dev.example.com:443/ovirt-engine/api due to SDK error Message: Error while sending HTTP request: (60, "Peer's certificate issuer has been marked as not trusted by the user.") What am I missing? Thanks Shawn

1 0

yum error
by Fernando Fuentes 16 Nov '18

16 Nov '18

Team, This just started happening. Error: Package: ovirt-host-4.2.3-1.el7.x86_64 (@ovirt-4.2) Requires: glusterfs-rdma Removing: glusterfs-rdma-3.12.15-1.el7.x86_64 (@ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.15-1.el7 Obsoleted By: mlnx-ofa_kernel-4.3-OFED.4.3.1.0.1.1.g8509e41.3.rhel7u4.x86_64 (spp) Not found Available: glusterfs-rdma-3.8.4-53.el7.centos.x86_64 (base) glusterfs-rdma = 3.8.4-53.el7.centos Available: glusterfs-rdma-3.8.4-54.15.el7.centos.x86_64 (updates) glusterfs-rdma = 3.8.4-54.15.el7.centos Available: glusterfs-rdma-3.12.0-1.el7.x86_64 (ovirt-4.2-centos-gluster312) I cant seem to update. Any ideas why this is happening? Regards, -- Fernando Fuentes ffuentes(a)txweather.org http://www.txweather.org

2 2

how to allow VM to query external DHCP server
by Jarosław Prokopowski 16 Nov '18

16 Nov '18

Hi, It seems my VMs are not able to send DHCP requests to external DHCP server located in the same network as oVirt hosts. Can anyone tell me how I can enable this? Thanks Jarek

1 1

oVirt monitoring
by b.yuri8＠gmail.com 16 Nov '18

16 Nov '18

Hello, I'm trying to do some performance monitoring on our oVirt and want to ask if someone has any experience with it? Currently I'm trying Red Hat Virutalization tool which has REST API, where you can get statistics per host, vm, disk and nic. Problem is that you cannot get any historical data via rest api (at least I didn't find any way to do it) and almost all metrics are gauge values over some interval (couldn't find it documentation, but it looks like they are updated every 15 s). I surely don't want to query whole environment every 15 seconds and missing some values is also not an option since I could miss some spikes in performance. Any help is appreciated! George

2 1

OVS and Ovirt integration questions
by 0pk0de＠riseup.net 16 Nov '18

16 Nov '18

Hello, After having integrated OVS with Ovirt and enabled it as default network provider I am facing the following issues. I can see with "ovs-vsctl show" that the virtual switch / bridge called "br-int" is created. I can see interfaces being added / removed to it as I start / stop VMs. [root@******* ~]# ovs-vsctl show 78e883f9-f074-4292-afce-bb829ded856b Bridge br-int fail_mode: secure Port "vnet6" Interface "vnet6" Port br-int Interface br-int type: internal Port "vnet4" Interface "vnet4" ovs_version: "2.9.0" Now I for example want to create a new interface as shown: ip tuntap add mode tap sniff0 ovs-vsctl add-port br-int sniff0 -- --id=@p get port sniff0 -- --id=@m create mirror name=m0 select-all=true output-port=@p -- set bridge br-int mirrors=@m fae36943-2ca7-4914-9679-0b881cd062d8 Its created, but how do I assign this sniffing interface to a ovirt VM? also, how can I create sniffing ports listening only on a subset of interfaces if they get dynamically created / removed? vnet6 points to host A now, but after shutting it down starting a few other VMs it will point to host B... How do I control to what vm the vnetX nic gets assigned?

4 3

Foreman integration / Network integration (storage)
by jeanbaptiste＠nfrance.com 16 Nov '18

16 Nov '18

Hello everybody, I use oVirt with Foreman to bare metal provision hypervisor. On foreman side, I use excellent Discovery plugin firstly. Afterthat I configure a "bond0" lagg on Network host tab. Into this bond0, I create some "virtual interface" (bond0.15 for example) with a static IP assignation via integrated Foreman IPAM. All is pretty cool, but after oVirt installation is done, I'm "forced" via postinstall to apply: Add "NM_Controlled=no" to all my bond0.* interfaces. Afterthat on oVirt , Host, "Setup Host Network", I'm able to move my network to the host and have automatically the IP address "configured" since read from the ifcfg file. This method seem to work but only in "one time mode". There is no real link between oVirt and Foreman for IP assignement. Do you use anothers way to provision bare metal hypervisor and have automatic IP assignement (for storage network for ex) between these two excellent tools ? thanks !

1 0

using vlan-tagged nic for ovirtmgmt
by Tony Brian Albers 16 Nov '18

16 Nov '18

Is this possible? I have 3 hosts with each four physical interfaces. On one of them, I have a vlan defined which I'd like to use for ovirtmgmt. However, after installing the host, it says that the ovirtmgmt network is missing on it and if I try to assign ovirtmgmt I can only do it on the physical NIC's Any ideas? /tony -- -- Tony Albers Systems Architect Systems Director, National Cultural Heritage Cluster Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark. Tel: +45 2566 2383 / +45 8946 2316

4 5

Engine login fails after previously working.
by Jeremy Tourville 16 Nov '18

16 Nov '18

I recently completed setup for 389 DS and ovirt-engine-extension-aaa-ldap-setup. I was able to complete the script run without errors and could perform both login and search functions without issue. Initially after setup I was able to login. After getting all this to work I had rebooted the 389 DS server. I tried to login as the super user I created earlier. I am getting the message "Unable to login. Verify your login information or contact the system administrator." This issue only seemed to happen after the reboot, prior to that it had been working. Any thoughts on troubleshooting? Thanks in advance.

2 1

VM import using wrong/slower interface. help/question.
by Jacob Green 15 Nov '18

15 Nov '18

Currently I have a host that has multiple network connections. 1 bonded 20Gigabit connect and a couple of 1 gig Ethernet connections. Then my export storage domain is on a storage device on a vlan we can call vlan B. Today I was exporting a VM from one environment to another, and after I reattached the export domain and started importing I noticed an even message for one of my hosts, it looked like the following. "Host A has network interface which exceeded the defined threshhold [95%] (eno3: transmit rate [8%], receive rate [98%])" So when I take a look at that hosts interfaces in the OVIRTENGINE gui I can confirm that it is exceeding 900Mbits on that interface. The problem/question is this. I have the migration network set as well as the ovirtmgmt network on the 20Gigabit interface. The only network profile attached to ENO 3 is VLAN-B and only VM traffic on that profile. So why is it using that eno3 interface instead of the ovirtmgmt interface on the 20Gigabit interface to import the VM? So I do have at least one theory, the storage solution is also on VLAN B the same VLAN that eno3 rides on, but I am of the understanding that Ovirt should be instructing the host to use the migration network, which in my case is also my ovirtmgmt network on the 20Gigabit interface. It matters because my storage is also on a 20Gigabit bond and these imports would be a lot faster if it was using the correct network to the host to import the VM. I hope my question is clear enough, I would provide screenshots but the ovirt-users mailing lists scrubs those. Basically can I instruct or force ovirt to import VMs over my 20Gigabit interface instead of the slower 1Gig interface that is hooked up. Thank you. -- Jacob Green Systems Admin

1 0

corrupted hosted engine
by Jarosław Prokopowski 15 Nov '18

15 Nov '18

Hi, It looks like after host restart my hosted engine VM is not accessible any more. The storage is glusterfs. The gluster volume is healthy. The VM status is: {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} hosted-engine --console The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null> I tried to boot it from cdrom by changing vm.conf file and I'm not sure if the syntax is correct: 1. I removed bootOrder:1 from the index:0 device devices={index:0,iface:virtio,format:raw,address:{type:pci,slot:0x07,bus:0x00,domain:0x0000,function:0x0},volumeID:8d823e33-4260-4004-a468-cf477d7b1f5b,imageID:41342181-5c8f-4544-878b-44fdaa40dddc,readonly:false,domainID:beb954e7-61b7-4437-bd21-4b268e1a26e5,deviceId:41342181-5c8f-4544-878b-44fdaa40dddc,poolID:00000000-0000-0000-0000-000000000000,device:disk,shared:exclusive,propagateErrors:off,type:disk} 2. in index:2 device I addedd bootOrder:1 and path to the iso image: devices={index:2,iface:ide,shared:false,readonly:true,bootOrder:1,deviceId:8c3179ac-b322-4f5c-9449-c52e3665e0ae,address:{controller:0,target:0,unit:0,bus:1,type:drive},device:cdrom,path:/opt/iso/CentOS-7-x86_64-DVD-1804.iso,type:disk} The outcome is the same - no console connection. Now I also get: hosted-engine --vm-start Command VM.getStats with args {'vmID': '1e3aa9cf-8708-40a0-bc86-1127df01047a'} failed: (code=1, message=Virtual machine does not exist: {'vmId': u'1e3aa9cf-8708-40a0-bc86-1127df01047a'}) Unfortunately I do not have any backup. Is there a way to redeploy hosted engine and import current configuration or any other way to fix it?

4 7

Metrics Store installation - ansible playbook "deploy_cluster" - docker_image_availability
by Markus Schaufler 15 Nov '18

15 Nov '18

Hi, trying to install the metrics store following the updated install guide https://www.ovirt.org/documentation/metrics-install-guide/Setting_Up_OpenSh… Prerequisites and Network Check playbook run through; when executing ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-39-aio playbooks/deploy_cluster.yml ################################# CHECK [memory_availability : localhost] ******************************************************************************************************************************* fatal: [localhost]: FAILED! => { "changed": false, "checks": { "disk_availability": {}, "docker_image_availability": { "failed": true, "failures": [ [ "OpenShiftCheckException", "One or more required container images are not available:\n cockpit/kubernetes:latest,\n openshift/origin-deployer:v3.9.0,\n openshift/origin-docker-registry:v3.9.0,\n openshift/origin-haproxy-router:v3.9.0,\n openshift/origin-pod:v3.9.0\nChecked with: skopeo inspect [--tls-verify=false] [--creds=<user>:<pass>] docker://<registry>/<image>\nDefault registries searched: docker.io\nFailed connecting to: docker.io\n" ] ], "msg": "One or more required container images are not available:\n cockpit/kubernetes:latest,\n openshift/origin-deployer:v3.9.0,\n openshift/origin-docker-registry:v3.9.0,\n openshift/origin-haproxy-router:v3.9.0,\n openshift/origin-pod:v3.9.0\nChecked with: skopeo inspect [--tls-verify=false] [--creds=<user>:<pass>] docker://<registry>/<image>\nDefault registries searched: docker.io\nFailed connecting to: docker.io\n" }, "docker_storage": {}, "memory_availability": {}, "package_availability": { "changed": false, "invocation": { "module_args": { "packages": [ "PyYAML", "bash-completion", "bind", "ceph-common", "cockpit-bridge", "cockpit-docker", "cockpit-system", "cockpit-ws", "dnsmasq", "docker", "etcd", "firewalld", "flannel", "glusterfs-fuse", "httpd-tools", "iptables", "iptables-services", "iscsi-initiator-utils", "libselinux-python", "nfs-utils", "ntp", "openssl", "origin", "origin-clients", "origin-master", "origin-node", "origin-sdn-ovs", "pyparted", "python-httplib2", "yum-utils" ] } } }, "package_version": { "changed": false, "invocation": { "module_args": { "package_list": [ { "check_multi": false, "name": "openvswitch", "version": [ "2.6", "2.7", "2.8", "2.9" ] }, { "check_multi": false, "name": "origin", "version": "3.9" }, { "check_multi": false, "name": "origin-master", "version": "3.9" }, { "check_multi": false, "name": "origin-node", "version": "3.9" } ], "package_mgr": "yum" } } } }, "msg": "One or more checks failed", "playbook_context": "install" } NO MORE HOSTS LEFT **************************************************************************************************************************************************** to retry, use: --limit @/usr/share/ansible/openshift-ansible/playbooks/deploy_cluster.retry PLAY RECAP ************************************************************************************************************************************************************ localhost : ok=53 changed=0 unreachable=0 failed=1 INSTALLER STATUS ****************************************************************************************************************************************************** Initialization : Complete (0:00:16) Health Check : In Progress (0:00:44) This phase can be restarted by running: playbooks/openshift-checks/pre-install.yml Failure summary: 1. Hosts: localhost Play: OpenShift Health Checks Task: Run health checks (install) - EL Message: One or more checks failed Details: check "docker_image_availability": One or more required container images are not available: cockpit/kubernetes:latest, openshift/origin-deployer:v3.9.0, openshift/origin-docker-registry:v3.9.0, openshift/origin-haproxy-router:v3.9.0, openshift/origin-pod:v3.9.0 Checked with: skopeo inspect [--tls-verify=false] [--creds=<user>:<pass>] docker://<registry>/<image> Default registries searched: docker.io Failed connecting to: docker.io The execution of "playbooks/deploy_cluster.yml" includes checks designed to fail early if the requirements of the playbook are not met. One or more of these checks failed. To disregard these results,explicitly disable checks by setting an Ansible variable: openshift_disable_check=docker_image_availability Failing check names are shown in the failure details above. Some checks may be configurable by variables if your requirements are different from the defaults; consult check documentation. Variables can be set in the inventory or passed on the command line using the -e flag to ansible-playbook. ############################################ I'm using a proxy server - might that cause this problem? If so - where in the different (sub)playbooks would I have to set the environment variable? Thanks for any hint on this!

5 15

How to force a QoS IO limit update to all disks
by Florian Schmid 15 Nov '18

15 Nov '18

Hi, oVirt version: 4.2.5.1 I have a strange problem with IO limiting. I have a storage domain for our dev environment and I have set the default Disk Profile to a QoS rule with IO limit enabled. This rule is working so far, but when I change the QoS rule of this default Disk Profile to a different IO limit, all the disks have still the old limit active. Only when I edit the disk and click OK without changing anything, I see also in Events, that the new IO limit is set. This behavior would cause me a lot of work, because we have several 100s of disks and I can't edit all, only to have new QoS active. Is there another way to do this bulk change of disk IO limit? What data do you need to have a look on? EDIT: I saw now, that the QoS policy is automated updated on some VMs and there only on some disks, but not on all. Is there a rate limit active or so? BR Florian Schmid

2 3

nested item with ovirt_vm_facts ansible module
by Nathanaël Blanchet 15 Nov '18

15 Nov '18

I try to get a list for all vms : "vm_name : description : id " A simple loop works: - debug: msg: "{{ ovirt_vms | map(attribute='snapshots') | list }}" register: snapshotid2 tags: snapshots2 - debug: msg: "{{ ovirt_vms | map(attribute='name') | list }}" register: name2 tags: snapshots2 - set_fact: toto: "{{ name2.msg[item] }} : {{ snapshotid2.msg[0][0].description }} : {{ snapshotid2.msg[0][0].id }} " with_item: - 0 - 1 register: all_snapshots2 tags: snapshots2 - debug: var: all_snapshots2 tags: snapshots2 Now I want insert a second loop with "with_nested" like so: - set_fact: toto: "{{ name2.msg[item.1] }} : {{ snapshotid2.msg[0].item.0.description }} : {{ snapshotid2.msg[0].item.0.id }} " with_nested: - [ '0', '1'] - [ '1', '0'] but I always have this error: "The error was: 'list object' has no attribute u'0'" How can I do such a thing? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 2

Ovirt and Foreman integration failure to provision
by 0pk0de＠riseup.net 15 Nov '18

15 Nov '18

Hello, I am trying to integrate ovirt and foreman, foreman is able to create VMs but fails to provision them correctly (image/template based). The IP address does not get set to the correct one, cloud-init doesnt run either since the password is not correct after booting. My questions are the following: 1. how does the normal provisioning setup looks like (using image/template)? I assumed it would just provision it depending on my puppet classes after booting, is this incorrect? 2. What does foreman *need* from ovirt? does it need a template that for example already has puppet installed? I assumed this was not the case... 3. How is it possible to initially "seed" the vm with the puppet master details when not using cloud-init (which seems optional), what magic can make this happen behind the scenes? is it something like libguestfs? Can I just use a cloud glance image like "centos 7 generic cloud v1805" and import that as a template and then create a host on foreman using this template? and then it should provision it?

1 0

Ovirt-engine Domain integration to SAMBA4.7 AD domain controller
by aru_barani＠yahoo.com 15 Nov '18

15 Nov '18

1.I have one samba4 AD domain controller[samba4dc.eipl.com] 2. I get PEM.code from default smb file from domain controller 3. when i try the following command to check user "ovirt-engine-extensions-tool aaa login-user --profile=eipl.com --user-name=administrator" it show me the following error "SEVERE Cannot resolve principal 'administrator(a)eipl.com'" so please give me any idea about this

2 2

Single Node oVirt and Gluster Hyperconverged
by Jeremy Tourville 15 Nov '18

15 Nov '18

I have a question about this specific prerequisite- * You must have at least 2 interfaces on the host, so that the frontend and backend traffic can be separated out. Having only one network will cause the engine monitoring, client traffic, gluster I/O traffic to all run together and interfere each other. To segregate the backend network, the gluster cluster is formed using the backend network addresses, and the nodes are added to the engine using the frontend network address. >>>You must have at least 2 interfaces on the host, so that the frontend and backend traffic can be separated out.>>>This part is very clear to me. You need at least 2 NICs. >>>Having only one network will cause the engine monitoring, client traffic, gluster I/O traffic to all run together and interfere each other. To segregate the backend network, the gluster cluster is formed using the backend network addresses, and the nodes are added to the engine using the frontend network address.>>> Ok, so you definitely need two IPs. What is not clear to me is, do you need to have the IPs in different subnets or can they be in the same subnet? For reference, I was able to set this up with two IPs in the same subnet and it does seem to work. However, I have noted some slowness issues while connecting storage domains during startup and frequently get messages about needing to restart the HA agent. Usually it seems after I try to restart services I can get the system to recognize the engine storage domain and start the engine. I wonder if my problem is the fact that both my front and backend IPs are in the same subnet? Thanks for your advice.

1 0

Re: ovirt-engine-extension-aaa-ldap-setup failed
by Jeremy Tourville 15 Nov '18

15 Nov '18

The backend is 389 DS, no this is not Govt related. This will be used as a training platform for my local ISSA chapter. This is a new 389 DS server. I followed the instructions at https://www.unixmen.com/install-and-configure-ldap-server-in-centos-7/ The server is "stock" with the exceptions of the settings for startTLS and adding certificates, etc (basically, whatever is needed to integrate with the Ovirt Engine.) I am using my Admin account to perform the bind. What I don't understand is why everything else in the aaa setup script works except the login sequence. It would seem like my certificates are correct, correct use of the admin DN, etc. The funny part is I can login to the server using the admin account and password yet the same admin account and password fail when using the aaa setup script. But, that is why I am using the expert knowledge on the list! Maybe I have overlooked a simple prerequisite setting needed for setup somewhere? I'll wait for someone to chime in on possible reasons to get this message: SEVERE Authn.Result code is: CREDENTIALS_INVALID [ ERROR ] Login sequence failed ______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TGT7ASCWSUTU6…

3 7

Separating VM network
by d.gengenbach＠patagona.de 14 Nov '18

14 Nov '18

We would like to separate our VM traffic completely from our host/storage network. As far as I can see, there is no definitive guide to achieve this by using VLANs/separate VM networks/subnetting. In our current setup: - the storage traffic happens in a separate VLAN (configured directly on the switch) on separate NICs on both hosts/storages in the 192.168.179.0/24 subnet - all other infrastructure (oVirt hosts, gateway, DHCP, DNS, VM thinclients, switches, ...) are in the 192.168.178.0/24 subnet We now want to separate the oVirt hosts/engine completely from the other infrastructure, eg. the VMs and thinclients. I am not experienced in networking and would be very thankful for all hints/tipps! Thanks in advance, David

2 3