- Users - oVirt List Archives

hosted engine setup error
by dhy336＠sina.com 24 May '18

24 May '18

hiI deploy ovirt-engine-4.2.2 hosted-engine by #hosted-engine --deploy, but face some error bridge ovirtmgmt is not configure, i should how to do? thanks [ INFO ] TASK [Get ovirtmgmt route table id][ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.010899", "end": "2018-05-23 20:03:21.222559", "rc": 0, "start": "2018-05-23 20:03:21.211660", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []}[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook[ INFO ] Stage: Clean up[ INFO ] Cleaning temporary resources vdsm.log 2018-05-23 19:55:15,305+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') VM wrapper has started (vm:2619)2018-05-23 19:55:15,454+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Starting connection (guestagent:245)2018-05-23 19:55:15,458+0800 ERROR (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') Failed to connect to guest agent channel (vm:2403)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2401, in _vmDependentInit self.guestAgent.start() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 246, in start self._prepare_socket() File "/usr/lib/python2.7/site-packages/vdsm/virt/guestagent.py", line 288, in _prepare_socket supervdsm.getProxy().prepareVmChannel(self._socketName) File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda> **kwargs) File "<string>", line 2, in prepareVmChannel File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod raise convert_to_error(kind, result)OSError: [Errno 2] No such file or directory: '/var/lib/libvirt/qemu/channels/bfc6f7cf-3e8d-4368-97f8-78a5c74a5175.com.redhat.rhevm.vdsm'2018-05-23 19:55:15,480+0800 INFO (vm/bfc6f7cf) [virt.vm] (vmId='bfc6f7cf-3e8d-4368-97f8-78a5c74a5175') CPU running: domain initialization (vm:5908) [root@hosted-engine-test1 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:6c:ee:a8 brd ff:ff:ff:ff:ff:ff inet 192.168.122.217/24 brd 192.168.122.255 scope global dynamic eth0 valid_lft 2936sec preferred_lft 2936sec inet6 fe80::834a:9cc1:df2:83f/64 scope link valid_lft forever preferred_lft forever18: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 9a:d1:bc:96:cc:c0 brd ff:ff:ff:ff:ff:ff19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0 valid_lft forever preferred_lft forever20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:55:06:26 brd ff:ff:ff:ff:ff:ff

2 1

Fwd: Shameless networking question
by Ales Musil 24 May '18

24 May '18

On Wed, May 23, 2018 at 2:43 PM, Peter Harman <pharman(a)homeyertool.com> wrote: > Ovirt Community, > > > > First off: thank you – these emails have helped me to get Ovirt running. I > barely know what I am doing but learning quickly. > > > > I am trying to do a network separation and confusing myself. I have two > physical networks (10.10.x.x/16 and 192.168.1.x/24) my ovirt management is > bridged on 10.10.x.x. My (currently single) Hosts have at least one > physical NIC connecting to each network. I am trying to get to the point > there the VMs are on the 192.168.1.x network and the 10.10.x.x network. The > goal is to join the VMs to a AD domain on 192.168.1.x but keep access as > limited as possible to the 10.10.x.x network. > > > > I’ve been on a googlethon over the past few days and still don’t > understand the best practice – or even a working practice – to accomplish > this goal. > > > > *Peter Harman – Systems and Safety Cordinator | Homeyer Precision > Manufacturing* > > > > [image: Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer > Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg] > > > > 16051 State Hwy 47, Marthasville, MO 63357| *E *pharman(a)homeyertool.com | > *P* 636.433.2244 | *F* 636.433.5257 > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > > Hi Peter, if I understand this correctly you can achieve that by marking the 192.168.1.x network as VM network via UI: Networks -> Desired network -> Edit -> Check VM network and save. Then in any VM that you want to be on this network set NICs VNIC profile that is connected to 192.168.1.x via UI: Virtual Machines -> Desired VM -> Network Interfaces -> nicX -> Edit -> Profile -> Select profile that is connected to 192.168.1.x -> Save. If the VM is up and running you need to first unplug the interface save it and then change profile and plug it in again. Hopefully this helps. Regards, Ales -- ALES MUSIL INTERN - rhv network Red Hat EMEA <https://www.redhat.com/> amusil(a)redhat.com IM: amusil <https://red.ht/sig>

1 0

Obtain dynamic inventory onto local machine using ovirt4.py for self-hosted engine
by 03ce007＠gmail.com 24 May '18

24 May '18

I have successfully deployed self-hosted-engine (4.2) on centos (7.4) server. the server address is ovirt where the self-hosted engine running on it has fdqn as engine.ovirt. I have ovirt,ini configured on server acan run the ovirt4.py from the server to obtain the vms in groups. But I want to control the vms using ansible from my macbook and run ansible playbooks locally. so I have downloaded the ovirt.ini and ovirt4.py from server and tried running it, but had no success. Is there something special needs setting up for 'self-hosted-ovirt-engine' as oppose to vanilla ovirt-engine which will allow me to control vms from my macbook? thanks.

5 4

oVirt upgrade node from 4.1.9 to 4.2.3
by rcasebier＠adicio.com 23 May '18

23 May '18

My engine is upgraded and running 4.2.3. I am testing out upgrading my first local storage node. I installed the 4.2 release repo and ran a yum update. I had to manually install the following packages form CentOS (yum install udisks2 lshw iotop libvirt-daemon-config-network virt-install python-prettytable) for some reason these dependencies did not exist in the oVirt repo's. I was able to run yum update after fixing this issue and my host was installed with 4.2.3. After a reboot, it failed to boot, the host failed to start the login service and the authorization manager. Has anyone run into this issue?

1 0

Using remote viewer outside lan
by Aziz 23 May '18

23 May '18

Hi all, I am able to access my VMs from LAN using remote Viewer, however this is not working from outside LAN, my setup is as follow: 1. Controller in a separate HW machine 2. Host in a server When checking the console.vv file, I see that it includes the local IP address of the host + port 5900. Is there a way to force ovirt to generate a console.vv file with public IP port when the user tries to connect from Internet and another file with lan IP when the user tries to connect from LAN. Any hint on how to set this feature up ? Best regards

4 3

Second host deployment fails on self-hosted-engine
by 03ce007＠gmail.com 23 May '18

23 May '18

I have self-hosted-engine (4.2) deployed successfully on cento (7.4) server. The physical server has 'ovirt' as hostname and the self-hosted engineVM deployed and running on it has 'engine.ovirt' as fdqn. I want to deploy another host on engineVM and I am using pre-baked oVirt.Infra role example playbook that has two host defined. But when I run it against the engineVM it fails with 'Connecting to host via SSH has failed' error. Below is the snippet from engine.log Failed to establish session with host 'host2': SSH connection timed out connecting to 'root(a)1.2.3.6' Validation of action 'AddVds' failed for user admin@internal-authz. Reasons: VAR__ACTION__ADD,VAR__TYPE__HOST,$server 1.2.3.6,VDS_CANNOT_CONNECT_TO_SERVER I thought, the example playbook should run and deploy two hosts on already deployed engineVM. Do i need to update the example playbook?

2 1

Re: ovirt and gluster disk config
by Karli Sjöberg 23 May '18

23 May '18

1 0

Hosted Engine Setup Erro
by Sakhi Hadebe 23 May '18

23 May '18

Hi, I am new to ansible and tring to deploy an ovrt cluster with gluster. I am following this documentation https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluste…, although the screenshots are not exactly the same. Gluster successfully deployed. Below is what is insatlled on my OvirtNodes: 1. ansible --version ansible 2.5.3 config file = /etc/ansible/ansible.cfg 2. glusterfs 3.12.9 3. oVirtNode 4.2.3 4. CentOS Linux release 7.4.1708 (Core) During the hosted engine setup it throws the ERROR below: [ INFO ] TASK [Prepare CIDR for "virbr0"] [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: 'dict object' has no attribute 'ipv4'\n\nThe error appears to have been in '/usr/share/ovirt-hosted-engine-setup/ansible/bootstrap_local_vm.yml': line 50, column 7, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n tags: [ 'skip_ansible_lint' ]\n - name: Prepare CIDR for \"{{ virbr_default }}\"\n ^ here\nWe could be wrong, but this one looks like it might be an issue with\nmissing quotes. Always quote template expression brackets when they\nstart a value. For instance:\n\n with_items:\n - {{ foo }}\n\nShould be written as:\n\n with_items:\n - \"{{ foo }}\"\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook I have tried to use quotes on line 50 in the bootstrap_local_vm.yml file, it didn't work. Please help, I have been stuck on this almost the whole day. -- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za>

3 2

ovirt and gluster disk config
by william.dossett＠gmail.com 23 May '18

23 May '18

Hey, been a few years since I looked at ovirt. 3 years probably and at the time I was looking for compute and storage all in one -and was advised not to basically. So Hyperconvergence is now a thing and want to try it out. I was looking at the blog - up and running with ovirt 4.1, but it seems that is mostly for a lab setup. I've got some real hardware I am going to try this out on as a PoC, 5 Dell R720s with 12 TB raw storage in each. Just wondered if there was a guide to the hardware setup of my storage that I am missing? Should I configure the storage as hardware RAID before I start installing the Nodes? I did setup glusterfs cluster 3 years ago as well but memory fails me on how I had the RAID controller setup if at all. Thanks

4 3

attempting to upgrade ovirt host which fails.
by Edward Clay 23 May '18

23 May '18

Hello, Today I began upgrading my ovirt 4.1 to 4.2 by updating the engine following the steps in the 4.2 readme. This went well and the upgrade completed. What I've run into is I have attempted to install the ovirt release 4.2 on the host and then ran a yum upgrade on it while in maintenance mode. I rebooted the system and can put the host into active mode but in the ovirt compute host screen is showing that updates are available. No mater what I do to tell it to check for updates it still shows available updates. If I install updates they fail. I see events like the following in the graphical interface. Check for available updates on host host1 was completed successfully with message 'found updates for packages ovirt-host'. Host host1 was switched to Maintenance mode Host host1 upgrade was started Failed to upgrade Host host1 How can I resolve this issue? Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. Monitoring Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv

2 2

Shameless networking question
by Peter Harman 23 May '18

23 May '18

Ovirt Community, First off: thank you - these emails have helped me to get Ovirt running. I barely know what I am doing but learning quickly. I am trying to do a network separation and confusing myself. I have two physical networks (10.10.x.x/16 and 192.168.1.x/24) my ovirt management is bridged on 10.10.x.x. My (currently single) Hosts have at least one physical NIC connecting to each network. I am trying to get to the point there the VMs are on the 192.168.1.x network and the 10.10.x.x network. The goal is to join the VMs to a AD domain on 192.168.1.x but keep access as limited as possible to the 10.10.x.x network. I've been on a googlethon over the past few days and still don't understand the best practice - or even a working practice - to accomplish this goal. Peter Harman - Systems and Safety Cordinator | Homeyer Precision Manufacturing [Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg] 16051 State Hwy 47, Marthasville, MO 63357| E pharman(a)homeyertool.com |<mailto:pharman@homeyertool.com%20%7C> P 636.433.2244 | F 636.433.5257

1 0

How to delete leftover of a failed live storage migration disk
by Gianluca Cecchi 23 May '18

23 May '18

Hello, I had an error during live storage migration of a disk. The destination image was created but the process was not completed, because of a bug in the original version of sw. Then I updated sw but if I try to run again the move of the same disk to the same destination storage domain I get VDSM command HSMGetAllTasksStatusesVDS failed: Cannot create Logical Volume: ('679c0725-75fb-4af7-bff1-7c447c5d789c', 'd2a89b5e-7d62-4695-96d8-b762ce52b379') On destination storage domain, that is empty, from web admin gui I see only the 2 OVF_STORE disks. From OS point of view using lvs I see the leftover LV that oVirt complains not able to create (I suppose because already existent due to the former error) # lvs 679c0725-75fb-4af7-bff1-7c447c5d789c/d2a89b5e-7d62-4695-96d8-b762ce52b379 LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert d2a89b5e-7d62-4695-96d8-b762ce52b379 679c0725-75fb-4af7-bff1-7c447c5d789c -wi------- 55.00g I know that I should use the "vdsClient -s 0 deleteVolume " command from the SPM host. the syntax should be # vdsClient -s 0 deleteVolume --help Error using command: list index out of range deleteVolume <sdUUID> <spUUID> <imgUUID> <volUUID>,...,<volUUID> <postZero> [<force>] Deletes an volume if its a leaf. Else returns error I have difficulties to do the exact mapping of the various elements. Is it right what below? sdUUID --> VG name spUUID I can retrieve using: # vdsClient -s 0 getStorageDomainInfo 679c0725-75fb-4af7-bff1-7c447c5d789c uuid = 679c0725-75fb-4af7-bff1-7c447c5d789c type = ISCSI vguuid = nkoZA2-nQOu-oeXX-Phpa-moqh-FWuR-AFAh4B metadataDevice = 36589cfc0000006dd999f5618bf759d3f state = OK version = 4 role = Master vgMetadataDevice = 36589cfc0000006dd999f5618bf759d3f class = Data pool = ['5af30d59-004c-02f2-01c9-0000000000b8'] name = ISCSI_400G so spUUID is the pool --> 5af30d59-004c-02f2-01c9-0000000000b8 in my case ? for imgUUID I don't know a command to retrieve. in my case the target storage domain (ISCSI_400G) in this moment is the master one and I can see it under /rhev/data-center/mnt/blockSD/ and so I find # ll /rhev/data-center/mnt/blockSD/679c0725-75fb-4af7-bff1-7c447c5d789c/images/ total 4 drwxr-xr-x. 2 vdsm kvm 4096 May 10 15:39 530b3e7f-4ce4-4051-9cac-1112f5f9e8b5 So it seems to me in my case imgUUID is 530b3e7f-4ce4-4051-9cac-1112f5f9e8b5 But even if it is right in my particular case, how can I get in general? volUUID ? Is it the LV name corresponding, so in my case d2a89b5e-7d62-4695-96d8-b762ce52b379 ? The result of the vdsCLient command should be the removal of LV also? Thanks in advance for any insight or link to details... Gianluca

4 5

info about reinstall dead node
by Gianluca Cecchi 23 May '18

23 May '18

Hello, I have an host dead in a 4.1.9 environment (broken raid controller compromised both internal disks, don't ask me how it could happen...). I have replaced controller/disks and reinstalled ng-node on the same hw with the same parameters and same version (but ovirtmgmt bridge not present yet, only a bond0 that has to become backed up by the ovirtmgmt bridge when installed). In web admin gui it had been set as not responsive when failed. Now I cannot reinstall it as new. If I try to put it into maintenance it is correctly rebooted but then it remains non responsive. I think I have to "force remove" in some way the previous instance of this node, but the option is greyed out... How can I clean the node and then try to install as new again? Thanks, Gianluca

2 2

First host within Self-Hosted engine stays in non-responsive state
by 03ce007＠gmail.com 23 May '18

23 May '18

I am trying to setup self-hosted-engine (4.2) on a single machine running centos 7.4. I ran hosted-engine deploy script and it ran all the way through but failed on last task (at "Wait for the local bootstrap VM to be down at engine eyes") while creating the local engine VM. However, the --vm-status shows the engine status as up and is in good health, but I cannot interact with host installed on engine VM. The host within engine VM shows it is in non-responsive state, not clear why and what caused it. I can ssh into the local engine VM and the engine.log has below entries - 2018-05-17 11:03:57,739+01 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.VmDevicesMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-78) [6768004b] Exception:: org.springframework.dao.DataIntegrityViolationException: CallableStatementCallback; SQL [{call insertvmdevice(?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)}]; ERROR: insert or update on table "vm_device" violates foreign key constraint "fk_vm_device_vm_static" Detail: Key (vm_id)=(114581bb-7fef-4b08-8e3c-85dd5a9e680b) is not present in table "vm_static". ... ... ... 2018-05-17 11:03:59,957+01 ERROR [org.ovirt.engine.core.bll.pm.FenceProxyLocator] (EE-ManagedThreadFactory-engineScheduled-Thread-44) [2bf8b18f] Can not run fence action on host 'ovirt', no suitable proxy host was found. ... ... ... 2018-05-17 11:20:00,093+01 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (EE-ManagedThreadFactory-engine-Thread-2) [1a833057] Exception during connection ... ... ... 2018-05-17 11:20:00,386+01 ERROR [org.ovirt.engine.core.vdsbroker.HostDevListByCapsVDSCommand] (EE-ManagedThreadFactory-engine-Thread-2) [1a833057] Command 'HostDevListByCapsVDSCommand(HostName = ovirt, VdsIdAndVdsVDSCommandParametersBase:{hostId='1a6a47e6-934e-43f7-ad5b-ba8f8ff8df99', vds='Host[ovirt,1a6a47e6-934e-43f7-ad5b-ba8f8ff8df99]'})' execution failed: java.net.UnknownHostException: ovirt: Name or service not known ... ... ... 2018-05-17 11:20:03,287+01 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (EE-ManagedThreadFactory-engineScheduled-Thread-14) [] Exception during connection 2018-05-17 11:20:03,292+01 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-14) [] Unable to RefreshCapabilities: UnknownHostException: ovirt 2018-05-17 11:20:03,294+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-14) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VDSInfoReturn@46e3da89' 2018-05-17 11:20:03,294+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-14) [] HostName = ovirt 2018-05-17 11:20:03,297+01 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-14) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = ovirt, VdsIdAndVdsVDSCommandParametersBase:{hostId='1a6a47e6-934e-43f7-ad5b-ba8f8ff8df99', vds='Host[ovirt,1a6a47e6-934e-43f7-ad5b-ba8f8ff8df99]'})' execution failed: java.net.UnknownHostException: ovirt 2018-05-17 11:20:03,316+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-15) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ovirt command GetCapabilitiesAsyncVDS failed: Connection issue ovirt 2018-05-17 11:20:03,317+01 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-15) [] Unable to RefreshCapabilities: VDSNetworkException: VDSGenericException: VDSNetworkException: Connection issue ovirt ... ... ... and then above 5 ERROR messages are keep getting repeated. Why the connection fails when I can still ssh into the engine? where is the issue here?

4 9

update from 4.1.9 to 4.2.3 and OVN doubt
by Gianluca Cecchi 23 May '18

23 May '18

Hello, at beginning of 2017 I configured OVN in my oVirt 4.1.0 setup, with the previosulsy described notes, I think the ones here: http://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/ At that time OVN was not directly integrated in oVirt setup. Then I applied the updates in minor releases and coming at 4.1.9 level in late January this year. Now I plan to update to 4.2.3. I have doubts related to OVN setup. Will the new 4.2.3 OVN setup conflict with my current 4.1.x setup? WHat do I have to answer in setup related questions and prompt? In fact now, after enabling 4.2 repo and updating the setup itself, during the procedure (that I Canceled right now) I receive these questions: # engine-setup . . . [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment customization --== PRODUCT OPTIONS ==-- Configure ovirt-provider-ovn (Yes, No) [Yes]: . . . --== OVIRT ENGINE CONFIGURATION ==-- Perform full vacuum on the engine database engine@localhost? This operation may take a while depending on this setup health and the configuration of the db vacuum process. See https://www.postgresql.org/docs/9.0/static/sql-vacuum.html (Yes, No) [No]: Yes oVirt OVN provider user[admin@internal]: what_to_put_here oVirt OVN provider password: . . . --== CONFIGURATION PREVIEW ==-- Default SAN wipe after delete : False Firewall manager : firewalld Update Firewall : True . . . Set up ovirt-provider-ovn : True . . . Configure VMConsole Proxy : True Please confirm installation settings (OK, Cancel) [OK]: Cancel Thanks for any hint. Gianluca

3 9

oVirt: engine backup
by femi adegoke 23 May '18

23 May '18

Reading this: https://www.ovirt.org/documentation/self-hosted/chap-Backing_up_and_Restori… It says the node must be in maintenance mode. I was having a discussion on IRC & they were using this (see link) to backup, it makes no mention of maint mode https://scottlinux.com/2015/08/20/create-daily-rhevm-backups/ https://access.redhat.com/solutions/797463 Question: must the node be in maint mode before engine is backed up?

2 1

Planned restart of production services
by Evgheni Dereveanchin 23 May '18

23 May '18

Hi everyone, I will be restarting several production systems within the following hour to apply security updates. The following services may be unreachable for some period of time: - www.ovirt.org - project website - resources.ovirt.org - package repositories - gerrit.ovirt.org - code review - jenkins.ovirt.org - CI master It will not be possible to submit/review patches, clone repositories or run CI jobs during this period. Package repositories and the website will also be unreachable for a short period of time. I will announce you once the maintenance is complete. -- Regards, Evgheni Dereveanchin

2 2

Re: hosted-engine ovirt-engine server not run
by dhy336＠sina.com 23 May '18

23 May '18

Hi SimoneI debug my hosted engine, i find my engine block in class InitBackendServicesOnStartupBean -> serviceLoader.load(HostDeviceManager.class); I should how to dubug it? thanks----- Original Message ----- From: <dhy336(a)sina.com> To: "Simone Tiraboschi" <stirabos(a)redhat.com> Cc: users <users(a)ovirt.org> Subject: [ovirt-users] Re: hosted-engine ovirt-engine server not run Date: 2018-05-22 15:07 hi, I try to run my engine, if engine is good run, it has more log info in engine.log than bad run.my bad run engine log miss some info, I should how to dubug this issue? 2018-05-21 17:35:43,446+08 INFO [org.ovirt.engine.core.bll.hostdev.RefreshHostDevicesCommand] (EE-ManagedThreadFactory-engine-Thread-1) [6ced2adb] Running command: RefreshHostDevicesCommand internal: true. Entities affected : ID: 34fa518e-e453-4de2-bd18-4942885c8aa5 Type: VDSAction group MANIPULATE_HOST with role type ADMIN2018-05-21 17:35:43,447+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.hostdev.HostDeviceManager@20ad9625 2018-05-21 17:35:43,449+08 INFO [org.ovirt.engine.core.bll.dwh.DwhHeartBeat] (ServerService Thread Pool -- 64) [6ced2adb] Initializing DWH Heart Beat2018-05-21 17:35:43,464+08 INFO [org.ovirt.engine.core.bll.dwh.DwhHeartBeat] (ServerService Thread Pool -- 64) [6ced2adb] DWH Heart Beat initialized2018-05-21 17:35:43,465+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.dwh.DwhHeartBeat@75f99d39 2018-05-21 17:35:43,539+08 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ServerService Thread Pool -- 64) [6ced2adb] EVENT_ID: AFFINITY_RULES_ENFORCEMENT_MANAGER_START(10,780), Affinity Rules Enforcement Manager started.2018-05-21 17:35:43,542+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.scheduling.AffinityRulesEnforcementManager@703aa6cd 2018-05-21 17:35:43,547+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.CertificationValidityChecker@47df0bd8 2018-05-21 17:35:43,554+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.hostdeploy.HostUpdatesCheckerService@4dc8896 2018-05-21 17:35:43,556+08 INFO [org.ovirt.engine.core.bll.IPTablesDeprecationNotifier] (ServerService Thread Pool -- 64) [6ced2adb] Start initializing IPTablesDeprecationNotifier2018-05-21 17:35:43,560+08 INFO [org.ovirt.engine.core.bll.IPTablesDeprecationNotifier] (ServerService Thread Pool -- 64) [6ced2adb] Finished initializing IPTablesDeprecationNotifier2018-05-21 17:35:43,560+08 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 64) [6ced2adb] Start org.ovirt.engine.core.bll.IPTablesDeprecationNotifier@46fc7dd7 ----- Original Message ----- From: Simone Tiraboschi <stirabos(a)redhat.com> To: dhy336(a)sina.com Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] hosted-engine ovirt-engine server not run Date: 2018-05-21 21:05 On Mon, May 21, 2018 at 12:21 PM, <dhy336(a)sina.com> wrote: Hi I deploy hosted-engine with two nodes, when I power off the node that engine is runing, other node can run VM after about 3 minutes.but ovirt-engine server could not normally run. but systemctrl resetart ovirt-engine. ovirt-engine server can run. this is VM engine logs. Nothing seams bad from that logs.Can you please try reproducing it? _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org

1 0

Nginx proxy for Ovirt
by Aziz 22 May '18

22 May '18

Hi All, I'm trying to setup nginx as a reverse proxy in order to access ovirt remotely without having to add the fqdn in SSO_ALTERNATE_ENGINE_FQDNS , the idea is that nginx will handle the fqdn translation from my external FQDN (external.fqdn.net ) to ovirt's fqdn (lab.vdi.net) Is there a way to achieve scenario ? Thank you in advance ? Aziz

1 0

Serial pass-through on oVirt VMs
by Joshua Blake 22 May '18

22 May '18

Hello, We have an old Windows XP VM, that requires access to a physical serial port for our telephone system. We have this working in VMWare, however, I'm not entirely sure how we would set this up in oVirt? Can someone help please? Kind Regards, Joshua Blake

3 4

Re: Serial pass-through on oVirt VMs
by Tomáš Golembiovský 22 May '18

22 May '18

adding back the list On Tue, 22 May 2018 16:38:31 +0200 Francesco Romani <fromani(a)redhat.com> wrote: > On 05/22/2018 04:08 PM, Tomáš Golembiovský wrote: > > Hi, > > > > you can try to use VDSM hook to add a dummy serial device to the VM > > domain XML. Or if you really need a physical device then you can use the > > hook to add the <hostdev> element to the domain XML. Don't forget to pin > > the VM to a specific host though. > > Yes, pinning is most likely needed. As per libvirt configuration, there > should be direct libvirt support, maybe predating hostdev: > > https://libvirt.org/formatdomain.html#elementsCharHost > > Bests, > > -- > Francesco Romani > Senior SW Eng., Virtualization R&D > Red Hat > IRC: fromani github: @fromanirh > -- Tomáš Golembiovský <tgolembi(a)redhat.com>

1 0

Use local ansible to talk to engineVM and other vm
by 03ce007＠gmail.com 22 May '18

22 May '18

I have a self-hosted-engine (4.2) running on a centos 7.4 server. I have downloaded ovirt ansible roles from ansible-galaxy and can run them from the server where the engineVM is running and able to deploy new vms, clusters, dc, etc. I have seen the use of ovirt4.py file to target and group hosts which you can target for specific plays. However, the box where self-hosted-engine is running is a physical server but I am looking to run ansible from my local machine instead to manage vms running on engineVM. Is there a way to achieve this? Thank you in advance.

4 4

4.2.3 upgrade with a few errors
by ovirt＠fateknollogee.com 22 May '18

22 May '18

I have attached the logs in case you can find anything The upgrade to all 3 nodes generated a few errors. 1) Had to put node in & out of maintenance a few times before I could get the node to activate. 2) Node 1 upgrade failed. After activating the node, it became unresponsive. I had to login via ipmi to reboot the node. 3) /data-bricks: had 1 unsynced error & one 5 min self-heal Had to put node in & out of maintenance a few times before I could get the node to activate. Thx Femi

2 2

problem to delete snapshot
by Marcelo Leandro 22 May '18

22 May '18

Hello, I had problem when try delete an snapshot. in the gui show this erro: Error while executing action: vm-name: - General command validation failure. when I acess the snapshot tab this vm, the snapshot not show ID disk, not cotain disks in this snapshot. follow the engine and spm logs.

2 3

ovirt 4.1 gluster 3.8 repo no longer exist.
by Edward Clay 22 May '18

22 May '18

While checking for some patches on one of my ovirt systems I found that the ovirt-4.1-dependencies.repo no longer has a 3.8 version available. I see newer versions but not sure if I just need to change the following to point to it or upgrade to 4.2. baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.8/ to baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.10/ or baseurl=http://mirror.centos.org/centos/7/storage/$basearch/gluster-3.12/ Does anyone have the correct procedure I should follow? Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. Monitoring Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv

2 1