- Users - oVirt List Archives

how to expand a arbitrated-distributed-replicated volume
by Hans Kuhl 11 Jun '23

11 Jun '23

Hello all, how can I expand a arbitrated-distributed-replicated volume without adding additional arbiter bricks? my current gluster config is: Volume Name: data Type: Distributed-Replicate Volume ID: dcf75cf7-1937-4ce9-a7d0-46a56a3be4b4 Status: Started Snapshot Count: 0 Number of Bricks: 3 x (2 + 1) = 9 Transport-type: tcp Bricks: Brick1: gl1.lan:/gluster_bricks/sdc/sdc Brick2: gl2.lan:/gluster_bricks/sdc/sdc Brick3: gl3.lan:/gluster_bricks/sdx/sdx (arbiter) Brick4: gl2.lan:/gluster_bricks/sdd/sdd Brick5: gl3.lan:/gluster_bricks/sdc/sdc Brick6: gl1.lan:/gluster_bricks/sdx/sdx (arbiter) Brick7: gl3.lan:/gluster_bricks/sdd/sdd Brick8: gl1.lan:/gluster_bricks/sdd/sdd Brick9: gl2.lan:/gluster_bricks/sdx/sdx (arbiter)

2 1

Non responsive host (4.3.10)
by Maria Souvalioti 08 Jun '23

08 Jun '23

Hello everyone! Due to a recent major power outage in my area I now have an unresponsive self hosted host in an environment of 3 self hosted hosts. There's one vm stuck on there as well as some metadata I guess from when hosted engine was running there (before the power went down). I'm running 4.3.10 ovirt node with 3 nodes and GlusterFS, no arbiter, and I'm using it to provide services to our clients i.e. DNS, web sites, wikis, ticketing etc. and I cannot shut them down. The ovirt engine is up and running and I can manage all the other VMs that run on the other hosts through the web gui. The unresponsive host replies only to ICMP requests; in every other sense it's dead, no ssh, no gluster bricks, no console, nothing. I tried to place the faulty host in maintenance, using the option to stop glusterd, but wasn't able to as the engine won't let the host go into maintenance mode because it thinks the host has running VMs on it. The host won't go into maintenance even if I chose the "Ignore gluster quorum and self-heal validations" option. I spent last week creating a backup environment were I copied the VMs, to have somewhere to run them in case something goes terribly wrong with the systems or the gluster in the production system. I'm thinking of using the global maintenance mode and then shutting down the engine itself with *hosted-engine --vm-shutdown* and rebooting the affected host. Should I remove the host from the cluster and then re-add it or should I do something else? Thanks for any of your help!

3 4

Renew the engine certificate - egine-setup
by Fabrice Soler 08 Jun '23

08 Jun '23

Hello, We have an standalone engine version 4.3.6 and we try to renew the engine certificate. We have followed the official documentation but the engine-setup never ask us the question "Renew certificate ?" Do you have an idea ? Sincerely, -- Carte de visite DSI-DIT *Fabrice SOLER* Responsable du Département des Infrastructures Techniques (DIT) /Rectorat de la Guadeloupe - BP 480/ 97183 Les Abymes cedex *Téléphone : *0590 47 8321 +590 690 335 564 *Courriel*: www.ac-guadeloupe.fr

1 0

Rename Virtual Machine
by lavi.buchnik＠exlibrisgroup.com 08 Jun '23

08 Jun '23

Hi, We have this scenario: - VM running Centos-7 - VM running Oracle-8 Then, we shutdown and delete Centos-7 VM (verified by API and UI) Then, we rename Oracle-8 VM (via API) to have the name of the old Centos-7 VM and then stop/start Oracle-8 VM. Rename is working and VM is coming up (status is "up" from API and also in the UI). The problem is that Oracle-8 VM is not really up. it is hanging. not replying to PING nor to SSH. Seems like the root cause is this: - Oracle-8 VM name is indeed Centos-7 VM. but its FQDN (seen in UI) is still its Original name. - So when getting both Centos-7 VM name and Oracle-8 VM name status, I get an answer (via API) about both of them: Both reply with "up" I'm using a simple API to rename the VM as followed (vm_name is Oracle-8 VM name, and new_name is Centos-7 VM name): vm_id_obj = self.get_vm_id(vm_name) updated_vm = vm_id_obj.update( vm=types.Vm( name=new_name ) ) Thanks, Lavi

1 0

VM disks Block device
by hemak88＠gmail.com 08 Jun '23

08 Jun '23

LVM is used underneath the storage domain for disk management in kvm cluster on ovirt. VG which is the storage domain is visbile and active in all hosts in the same datacenter on ovirt. But, LV under this vg (that is the virtual disks of vms) is not active and the corresponding block devices of these LVs is not available on all hosts in cluster. I find only the running VMs LVs are active on the corresponding host. Is this a feature? Is it possible to get a corresponding block device and LV on all hosts in cluster?

3 2

Resending with Log: Hosted Engine Deploy Fails at "Waiting for Host to be up"
by Angel, Christopher 07 Jun '23

07 Jun '23

I've installed 3 Ovirt Nodes and am trying to set up the hosted engine. Every time I run it however, it fails at the 'Waiting for host to be up' stage. I've attached the relevant log. -- Christopher Angel, B.Eng, B.Sc Laboratory Systems Analyst, Computer Science Department University of Saskatchewan Christopher.angel(a)usask.ca<mailto:Christopher.angel@usask.ca> 3069661434

1 0

Ovirt Error after creating a VM image
by lavi.buchnik＠exlibrisgroup.com 07 Jun '23

07 Jun '23

Hi, I wrote an automation that provisioning a VM using ovirtsdk4 (we are using Ovirt 4.3). In the last week, we notice that sometimes the VM provisioning is failing with this error: "The response content type 'text/html; charset=iso-8859-1' isn't the expected XML" This error is happening when the automation is creating the VM image and waiting for its status to get change from "image-locked", this to be able to set affinity on it and later to start the new VM. So the error is happening while the image is in "image-locked" state. Can you please let me know why it is happening (note that it is occurring like 1 out of 4 attempts) and how can it get fixed? Thanks, Lavi

1 0

Unable to add more than 16 vCPUs to running VM
by David White 06 Jun '23

06 Jun '23

I have a fully patched / up-to-date engine: Software Version:4.5.4-1.el8 And a fully patched, up-to-date host. [root@cha3-storage dwhite]# yum info ovirt-hostLast metadata expiration check: 1:33:40 ago on Sun 04 Jun 2023 09:28:39 AM EDT. Installed Packages Name : ovirt-host Version : 4.5.0 Release : 3.el8 Architecture : x86_64 Size : 11 k Source : ovirt-host-4.5.0-3.el8.src.rpm Repository : @System From repo : centos-ovirt45 The host has 32GB of RAM, and there's only 1 VM on this host. When I try to add more CPUs to the VM from the manager UI, I get the following error: - The requested number of vCPUs is not available on the host the VM is running on What's going on here, and why can I not add more vCPUs to this VM? Sent with Proton Mail secure email.

2 3

oVirt 4.4 - Integrate event notifications with System Center Operations Manager
by angus＠ajct.uk 02 Jun '23

02 Jun '23

Hello I am looking to integrate oVirt 4.4 event notifications with an incident management tool - M$ System Center Operations Manager. I need to give examples to SCOM of what an unhealthy email looks like and what a recover/healthy email looks like for each event I want it to manage. Is there a way of triggering sample notifications (something failed/something recovered) for events or perhaps I can see the email templates used somewhere? (I did try a grep -Hr on the engine VM for "alertMessage" and "resolveMessage" for a VM migration notification but only found an entry in the in the notifier log. Thanks Angus

1 0

Regarding oVirt IP Address Change
by Pro Cloudguru 02 Jun '23

02 Jun '23

Hello oVIrt Community, Presently, I've a healthy & running oVirt Hosting that includes single DC, Cluster, SPM & Storage. The LAN IP Address range is 10.151.65.0/24. As we're in the process of migrating office premises, I'm worried about the existing oVirt IP Address Schema as the new range is 10.101.160/0/20. In this scenario, I'd like to know how the migration happens successfully without disturbing the oVirt Hosting & all hosted VMs. Please Guide, *Nishith N. Vyas*

1 0

novnc console error: promise.js missing?
by karl.morgan＠gmail.com 02 Jun '23

02 Jun '23

Seeing the following on the engine when attempting to start a novnc console 2023-03-31 11:57:34,988-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-29) [307c22a9] START, SetVmTicketVDSCommand(HostName = ov2node02-mn, SetVmTicketVDSCommandParameters:{hostId='19a92de3-c6e4-4f4e-be31-1d5533a2b6b6', vmId='4481b0e9-a96c-4ee7-8bd2-572558eb9fda', protocol='VNC', ticket='LMl903dd', validTime='120', userName='admin@ovirt', userId='9e88a363-34cb-466a-8ba9-25e46819423b', disconnectAction='LOCK_SCREEN', consoleDisconnectActionDelay='0'}), log id: 1d6520d5 2023-03-31 11:57:35,031-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-29) [307c22a9] FINISH, SetVmTicketVDSCommand, return: , log id: 1d6520d5 2023-03-31 11:57:35,044-07 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-29) [307c22a9] EVENT_ID: VM_SET_TICKET(164), User admin@ovirt@internalkeycloak-authz initiated console session for VM first 2023-03-31 11:57:35,158-07 INFO [org.ovirt.engine.core.utils.servlet.ServletUtils] (default task-29) [] Can't read file '/usr/share/ovirt-engine/files/novnc/vendor/promise.js' for request '/ovirt-engine/services/files/novnc/vendor/promise.js' -- 404 Curious if this is obvious to anyone? How to resolve? ovirt-engine-webadmin-portal-4.5.4-1.el9.noarch ovirt-engine-4.5.4-1.el9.noarch

2 1

troubleshooting SHE - Run engine-setup with answerfile - ?
by lejeczek 01 Jun '23

01 Jun '23

Hi guys. I'm revisiting my failed attempt to make friends with oVirt - novice so go easy on me. Deployment fails sooner that what can troubleshoot - at least I manged to find in docs so far - and I wanted to ask hot to troubleshot such failure as this: ... INFO ] TASK [ovirt.ovirt.engine_setup : Run engine-setup with answerfile] [ ERROR ] fatal: [localhost -> 192.168.1.209]: FAILED! => {"changed": true, "cmd": ["engine-setup", "--accept-defaults", "--config-append=/root/ovirt-engine-answers"], "delta": "0:08:05.997322", "end": "2023-06-01 13:07:15.932517", "msg": "non-zero return code", "rc": 1, "start": "2023-06-01 12:59:09.935195", "stderr": "", "stderr_lines": [], "stdout": "[ INFO ] Stage: Initializing\n[ INFO ] Stage: Environment setup\n Configuration files:\n ... Start with setting up Keycloak for Ovirt Engine", "[ ERROR ] Failed to execute stage 'Closing up': Command '/usr/share/ovirt-engine-keycloak/bin/kk_cli.sh' failed to execute", "[ INFO ] Stage: Clean up", " Log file is located at", " /var/log/ovirt-engine/setup/ovirt-engine-setup-20230601125911-448xvj.log", ... [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "There was a failure deploying the engine on the local engine VM. The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up ... Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20230601123237-rhwx8e.log Logfile to which 'stdout' points, shows nothing or I fail to find anything in it and/or understand it: ... 2023-06-01 13:07:17,716+0100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost -> 192.168.1.209]: FAILED! => {"changed": true, "cmd": ["engine-setup", "--accept-defaults", "--config-append=/root/ovirt-engine-answers"], "delta": "0:08:05.997322", "end": "2023-06-01 13:07:15.932517", "msg": "non-zero return code", "rc": 1, "start": "2023-06-01 12:59:09.935195", "stderr": "", "stderr_lines": [], "stdout": ... or Ovirt Engine\n[ ERROR ] Failed to execute stage 'Closing up': Command '/usr/share/ovirt-engine-keycloak/bin/kk_cli.sh' failed to execute\n[ INFO ] Stage: Clean up\n Log file is located at\n /var/log/ovirt-engine/setup/ovirt-engine-setup-20230601125911-448xvj.log\n[ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20230601130714-setup.conf'\n[ INFO ] Stage: Pre-termination\n[ INFO ] Stage: Termination\n[ ERROR ] Execution of setup failed", "stdout_lines": ["[ INFO ] Stage: Initializing", "[ INFO ] Stage: Environment setup", " Configuration files:", " /etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf,", " /etc/ovirt-engine-setup.conf.d/10-packaging.conf," ... ... 2023-06-01 13:08:52,946+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'msg': "The tas k includes an option with an undefined variable. The error was: 'local_vm_ip' is undefined. 'local_vm_ip' is undefined\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/sync_on_engine_ma chine.yml': line 2, column 3, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appear s to be:\n\n---\n- name: Set the name for add_host\n ^ here\n", '_ansible_no_log': False} 2023-06-01 13:08:53,047+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 ignored: [localh ost]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: 'local_vm_ip' is undefined. 'local _vm_ip' is undefined\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_eng ine_setup/tasks/sync_on_engine_machine.yml': line 2, column 3, but may\nbe elsewhere in the file depending on the exact syntax prob lem.\n\nThe offending line appears to be:\n\n---\n- name: Set the name for add_host\n ^ here\n"} ... 2023-06-01 13:09:16,818+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'changed': True, 'stdout': '', 'stderr': "error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208\nerror: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active", 'rc': 1, 'cmd': ['virsh', '-c', 'qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf', 'pool-destroy', '9ab14cca-78e0-4a8e-8a1b-00e98c300208'], 'start': '2023-06-01 13:09:16.614978', 'end': '2023-06-01 13:09:16.672260', 'delta': '0:00:00.057282', 'msg': 'non-zero return code', 'invocation': {'module_args': {'_raw_params': 'virsh -c qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf pool-destroy 9ab14cca-78e0-4a8e-8a1b-00e98c300208', '_uses_shell': False, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv': None, 'chdir': None, 'executable': None, 'creates': None, 'removes': None, 'stdin': None}}, 'stdout_lines': [], 'stderr_lines': ['error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208', "error: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active"], '_ansible_no_log': None} 2023-06-01 13:09:16,918+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 ignored: [localhost]: FAILED! => {"changed": true, "cmd": ["virsh", "-c", "qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf", "pool-destroy", "9ab14cca-78e0-4a8e-8a1b-00e98c300208"], "delta": "0:00:00.057282", "end": "2023-06-01 13:09:16.672260", "msg": "non-zero return code", "rc": 1, "start": "2023-06-01 13:09:16.614978", "stderr": "error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208\nerror: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active", "stderr_lines": ["error: Failed to destroy pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208", "error: Requested operation is not valid: storage pool '9ab14cca-78e0-4a8e-8a1b-00e98c300208' is not active"], "stdout": "", "stdout_lines": []} 2023-06-01 13:09:17,023+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Undefine local storage-pool 9ab14cca-78e0-4a8e-8a1b-00e98c300208] 2023-06-01 13:09:17,224+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 changed: [localhost] .. I think that last two snippets-blocks, might be most useful - but what does it says? When 'installer' is finished, there is no aforementioned pool however there is: -> $ virsh pool-list | grep '9ab14cca-78e0-4a8e-8a1b-00e98c300208' 9ab14cca-78e0-4a8e-8a1b-00e98c300208-1 active yes Engine VM remains is up & running, How far from successful deployment that is & what would be advised to do next? many thanks, L.

1 0

OKD Installer Provisioned Infrastructure in oVirt > 4.3
by Fredrik Arneving 30 May '23

30 May '23

Hi, I've successfully installed OKD <= 4.8 in my ovirt 4.3 self-hosted engine setup. However, I have now found out that the imageio-proxy and/or imageio-deamon has changed it's API calls and ports to make the OKD install fail on self-hosted (all-in-one) setups on ovirt 4.4 and 4.5. Since I've upgraded to version 4.5 I can no longer install OKD with Installer Provisioned Infrastructure. I recently read throough a long thread in bugzilla (https://bugzilla.redhat.com/show_bug.cgi?id=1871348) on how to get image uploads working from the GUI but haven't found any solutions for making the OKD install work. The suggested solution, engine-config -s "EnableImageioProxy=false", didn't solve my problem. Would it be possible to tweak the setup so that the OKD installer can upload it's image through imageio? I don't use the imageio service for anything else since I (almost) only kickstart my new vm's from my foreman servers so if other use cases than the OKD install would fail I can live with that. I take it the problem only appears for a self-hosted setup. If it was possible to migrate the engine to a standalone host (not a powerful compute node but somewhere with 4vCPU and 16 GB RAM) would that make the solution easier? I would lose a lot of my current infrastructure if I had to reinstall but if I can't find a better solution I will have to. Any help would be appreciated.

1 0

VM host deploy failed
by Latchezar Filtchev 30 May '23

30 May '23

Hi there, Centos Stream 8 fresh standalone install from nightly build of ovirt-engine. VM host Centos Stream 8 node nightly build repo enabled. Cannot add host to engine. The error message: Host n1 installation failed. Task Install ovirt-hosted-engine-setup package failed to execute. Please check logs for more details: /var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20230530094214-n1............. Any hint will be appreciated. Thank you! Best, Latcho 2023-05-30 09:42:26 EEST - { "uuid" : "e905de36-7b04-4b52-96b8-71855d561446", "counter" : 99, "stdout" : "fatal: [n1.aubgin.local]: FAILED! => {\"changed\": false, \"failures\": [], \"msg\": \"Depsolve Error occurred: \\n Problem: conflicting requests\\n - nothing provides python3-importlib-resources needed by ovirt-hosted-engine-setup-2.7.1-0.0.master.20230414113600.git340e19b.el8.noarch\", \"rc\": 1, \"results\": []}", "start_line" : 87, "end_line" : 88, "runner_ident" : "c7d833e9-8de3-4d53-87a3-72c3d80177ce", "event" : "runner_on_failed", "pid" : 41043, "created" : "2023-05-30T06:42:25.111204", "parent_uuid" : "ac162d01-a065-3587-db9e-000000000228", "event_data" : { "playbook" : "ovirt-host-deploy.yml", "playbook_uuid" : "de0dd632-7d53-4e08-a06c-610334200c49", "play" : "all", "play_uuid" : "ac162d01-a065-3587-db9e-000000000006", "play_pattern" : "all", "task" : "Install ovirt-hosted-engine-setup package", "task_uuid" : "ac162d01-a065-3587-db9e-000000000228", "task_action" : "ansible.builtin.yum", "task_args" : "", "task_path" : "/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-vdsm/tasks/packages.yml:6", "role" : "ovirt-host-deploy-vdsm", "host" : "n1.aubgin.local", "remote_addr" : "n1.aubgin.local", "res" : { "failures" : [ ], "results" : [ ], "rc" : 1, "msg" : "Depsolve Error occurred: \n Problem: conflicting requests\n - nothing provides python3-importlib-resources needed by ovirt-hosted-engine-setup-2.7.1-0.0.master.20230414113600.git340e19b.el8.noarch", "invocation" : { "module_args" : { "name" : [ "ovirt-hosted-engine-setup" ], "state" : "present", "allow_downgrade" : false, "autoremove" : false, "bugfix" : false, "cacheonly" : false, "disable_gpg_check" : false, "disable_plugin" : [ ], "disablerepo" : [ ], "download_only" : false, "enable_plugin" : [ ], "enablerepo" : [ ], "exclude" : [ ], "installroot" : "/", "install_repoquery" : true, "install_weak_deps" : true, "security" : false, "skip_broken" : false, "update_cache" : false, "update_only" : false, "validate_certs" : true, "sslverify" : true, "lock_timeout" : 30, "allowerasing" : false, "nobest" : false, "conf_file" : null, "disable_excludes" : null, "download_dir" : null, "list" : null, "releasever" : null } }, "_ansible_no_log" : null, "changed" : false }, "start" : "2023-05-30T06:42:23.217686", "end" : "2023-05-30T06:42:25.111007", "duration" : 1.893321, "ignore_errors" : null, "event_loop" : null, "uuid" : "e905de36-7b04-4b52-96b8-71855d561446" } } [root@e host-deploy]#

1 0

NIC Ordering
by Alan G 25 May '23

25 May '23

Is there any way to enforce NIC ordering so the vNICs match the ordering in the Engine UI? I found this but not clear if it was ever implemented? https://www.ovirt.org/develop/release-management/features/network/predictab…

3 6

ERROR HSMGetAllTasksStatusesVDS Cannot deactivate Logical Volume:
by parallax 25 May '23

25 May '23

Hello environment: oVirt 4.5.4-1 messages like this appear in the event log what do these errors mean? the volume 114f08c4-f864-44e1-a937-19405307e643 has 128m size ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-18) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM kvm3 command HSMGetAllTasksStatusesVDS failed: value=Cannot deactivate Logical Volume: 'error=General Storage Exception: ("5 [] [\' Logical volume 3526ebaa-31de-4c9f-b724-f0fbe5448a78/114f08c4-f864-44e1-a937-19405307e643 in use.\']\\n3526ebaa-31de-4c9f-b724-f0fbe5448a78/[\'114f08c4-f864-44e1-a937-19405307e643\']",), users={\'/dev/3526ebaa-31de-4c9f-b724-f0fbe5448a78/114f08c4-f864-44e1-a937-19405307e643\': [{\'pid\': 2227780, \'command\': \'systemd-udevd\', \'user\': \'root\', \'fd\': 7}]}' abortedcode=552

1 0

Extended ovirt image disk and now virtual size is < 1 GiB and actual size i +1TB
by arc＠b4restore.com 24 May '23

24 May '23

Hi, i extended 16 virtual image disks today by 1000GiB through the GUI and now we have a problem with some of them... 9 of them are shown if "edited" that they have a size of 0GiB and not 16360GiB as expected? 5 of them are not able to be extended either within the VM. we tried to power it off and then on again (not reboot, but actual power off / power on) any suggestions to get out of this weird mode? disks seems as if they have the "old" size within the VM but are shown in oVirt as if they are 0GiB.? They are relying on a posix compliant fs if that makes any difference, and they are thin-provisioned and discard-enabled. Thanks in advance.

2 3

VM causes CPU blocks and forces reboot of host
by dominik.drazyk＠blackrack.pl 23 May '23

23 May '23

Hello, I have recently migrated our customer's cluster to newer hardware (CentOS 8 Stream, 4 hypervisor nodes, 3 hosts with GlusterFS 5x 6TB SSD as JBOD with replica 3). After 1 month from the switch we encounter frequent vm locks that need host reboot in order to unlock the VM. Affected vms cannot be powered down from ovirt UI. Even if ovirt is successful in powering down affected vms, they cannot be booted again with information that OS disk is used. Once I reboot the host, vms can be turned on and everything works fine. In vdsm logs I can note the following error: 2023-05-11 19:33:12,339+0200 ERROR (qgapoller/1) [virt.periodic.Operation] <bound method QemuGuestAgentPoller._poller of <vdsm.virt.qemuguestagent.QemuGuestAgentPoller object at 0x7f553aa3e470>> operation failed (periodic:187) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/virt/periodic.py", line 185, in __call__ self._func() File "/usr/lib/python3.6/site-packages/vdsm/virt/qemuguestagent.py", line 476, in _poller vm_id, self._qga_call_get_vcpus(vm_obj)) File "/usr/lib/python3.6/site-packages/vdsm/virt/qemuguestagent.py", line 797, in _qga_call_get_vcpus if 'online' in vcpus: TypeError: argument of type 'NoneType' is not iterable /var/log/messages reports: May 11 19:35:15 kernel: task:CPU 7/KVM state:D stack: 0 pid: 7065 ppid: 1 flags: 0x80000182 May 11 19:35:15 kernel: Call Trace: May 11 19:35:15 kernel: __schedule+0x2d1/0x870 May 11 19:35:15 kernel: schedule+0x55/0xf0 May 11 19:35:15 kernel: schedule_preempt_disabled+0xa/0x10 May 11 19:35:15 kernel: rwsem_down_read_slowpath+0x26e/0x3f0 May 11 19:35:15 kernel: down_read+0x95/0xa0 May 11 19:35:15 kernel: get_user_pages_unlocked+0x66/0x2a0 May 11 19:35:15 kernel: hva_to_pfn+0xf5/0x430 [kvm] May 11 19:35:15 kernel: kvm_faultin_pfn+0x95/0x2e0 [kvm] May 11 19:35:15 kernel: ? select_task_rq_fair+0x355/0x990 May 11 19:35:15 kernel: ? sched_clock+0x5/0x10 May 11 19:35:15 kernel: ? sched_clock_cpu+0xc/0xb0 May 11 19:35:15 kernel: direct_page_fault+0x3b4/0x860 [kvm] May 11 19:35:15 kernel: kvm_mmu_page_fault+0x114/0x680 [kvm] May 11 19:35:15 kernel: ? vmx_vmexit+0x9f/0x70d [kvm_intel] May 11 19:35:15 kernel: ? vmx_vmexit+0xae/0x70d [kvm_intel] May 11 19:35:15 kernel: ? gfn_to_pfn_cache_invalidate_start+0x190/0x190 [kvm] May 11 19:35:15 kernel: vmx_handle_exit+0x177/0x770 [kvm_intel] May 11 19:35:15 kernel: ? gfn_to_pfn_cache_invalidate_start+0x190/0x190 [kvm] May 11 19:35:15 kernel: vcpu_enter_guest+0xafd/0x18e0 [kvm] May 11 19:35:15 kernel: ? hrtimer_try_to_cancel+0x7b/0x100 May 11 19:35:15 kernel: kvm_arch_vcpu_ioctl_run+0x112/0x600 [kvm] May 11 19:35:15 kernel: kvm_vcpu_ioctl+0x2c9/0x640 [kvm] May 11 19:35:15 kernel: ? pollwake+0x74/0xa0 May 11 19:35:15 kernel: ? wake_up_q+0x70/0x70 May 11 19:35:15 kernel: ? __wake_up_common+0x7a/0x190 May 11 19:35:15 kernel: do_vfs_ioctl+0xa4/0x690 May 11 19:35:15 kernel: ksys_ioctl+0x64/0xa0 May 11 19:35:15 kernel: __x64_sys_ioctl+0x16/0x20 May 11 19:35:15 kernel: do_syscall_64+0x5b/0x1b0 May 11 19:35:15 kernel: entry_SYSCALL_64_after_hwframe+0x61/0xc6 May 11 19:35:15 kernel: RIP: 0033:0x7faf1a1387cb May 11 19:35:15 kernel: Code: Unable to access opcode bytes at RIP 0x7faf1a1387a1. May 11 19:35:15 kernel: RSP: 002b:00007fa6f5ffa6e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 May 11 19:35:15 kernel: RAX: ffffffffffffffda RBX: 000055be52e7bcf0 RCX: 00007faf1a1387cb May 11 19:35:15 kernel: RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000027 May 11 19:35:15 kernel: RBP: 0000000000000000 R08: 000055be5158c6a8 R09: 00000007d9e95a00 May 11 19:35:15 kernel: R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000 May 11 19:35:15 kernel: R13: 000055be515bcfc0 R14: 00007fffec958800 R15: 00007faf1d6c6000 May 11 19:35:15 kernel: INFO: task worker:714626 blocked for more than 120 seconds. May 11 19:35:15 kernel: Not tainted 4.18.0-489.el8.x86_64 #1 May 11 19:35:15 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. May 11 19:35:15 kernel: task:worker state:D stack: 0 pid:714626 ppid: 1 flags:0x00000180 May 11 19:35:15 kernel: Call Trace: May 11 19:35:15 kernel: __schedule+0x2d1/0x870 May 11 19:35:15 kernel: schedule+0x55/0xf0 May 11 19:35:15 kernel: schedule_preempt_disabled+0xa/0x10 May 11 19:35:15 kernel: rwsem_down_read_slowpath+0x26e/0x3f0 May 11 19:35:15 kernel: down_read+0x95/0xa0 May 11 19:35:15 kernel: do_madvise.part.30+0x2c3/0xa40 May 11 19:35:15 kernel: ? syscall_trace_enter+0x1ff/0x2d0 May 11 19:35:15 kernel: ? __x64_sys_madvise+0x26/0x30 May 11 19:35:15 kernel: __x64_sys_madvise+0x26/0x30 May 11 19:35:15 kernel: do_syscall_64+0x5b/0x1b0 May 11 19:35:15 kernel: entry_SYSCALL_64_after_hwframe+0x61/0xc6 May 11 19:35:15 kernel: RIP: 0033:0x7faf1a138a4b May 11 19:35:15 kernel: Code: Unable to access opcode bytes at RIP 0x7faf1a138a21. May 11 19:35:15 kernel: RSP: 002b:00007faf151ea7f8 EFLAGS: 00000206 ORIG_RAX: 000000000000001c May 11 19:35:15 kernel: RAX: ffffffffffffffda RBX: 00007faf149eb000 RCX: 00007faf1a138a4b May 11 19:35:15 kernel: RDX: 0000000000000004 RSI: 00000000007fb000 RDI: 00007faf149eb000 May 11 19:35:15 kernel: RBP: 0000000000000000 R08: 00000007faf080ba R09: 00000000ffffffff May 11 19:35:15 kernel: R10: 00007faf151ea760 R11: 0000000000000206 R12: 00007faf15aec48e May 11 19:35:15 kernel: R13: 00007faf15aec48f R14: 00007faf151eb700 R15: 00007faf151ea8c0 May 11 19:35:15 kernel: INFO: task worker:714628 blocked for more than 120 seconds. May 11 19:35:15 kernel: Not tainted 4.18.0-489.el8.x86_64 #1 May 11 19:35:15 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Installed VDSM packages: vdsm-api-4.50.3.4-1.el8.noarch vdsm-network-4.50.3.4-1.el8.x86_64 vdsm-yajsonrpc-4.50.3.4-1.el8.noarch vdsm-http-4.50.3.4-1.el8.noarch vdsm-client-4.50.3.4-1.el8.noarch vdsm-4.50.3.4-1.el8.x86_64 vdsm-gluster-4.50.3.4-1.el8.x86_64 vdsm-python-4.50.3.4-1.el8.noarch vdsm-jsonrpc-4.50.3.4-1.el8.noarch vdsm-common-4.50.3.4-1.el8.noarch Libvirt: libvirt-client-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-nodedev-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-logical-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-network-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-qemu-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-scsi-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-core-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-config-network-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-iscsi-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-rbd-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-libs-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-config-nwfilter-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-secret-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-disk-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-mpath-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-gluster-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 python3-libvirt-8.0.0-2.module_el8.7.0+1218+f626c2ff.x86_64 libvirt-daemon-driver-nwfilter-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-lock-sanlock-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-interface-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-driver-storage-iscsi-direct-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 libvirt-daemon-kvm-8.0.0-14.module_el8.8.0+1257+0c3374ae.x86_64 During the issue with locked vms, they do not respond from network, I cannot use VNC console (or any other) to check what is happening from VM perspective. The host cannot list running processes. There are plenty of resources left and each host runs about 30-35 vms. First I thought that it might be related to glusterfs (I use gluster on other clusters and it usually works fine), so we migrated all vms back to old storage (NFS). The problem came back today on two hosts. I do not have such issues on other cluster which runs on Rocky 8.6 with hyperconverged glusterfs. Hence as a last resort I'll be migrating to Rocky 8 from CentOS 8-stream. Has anyone observed such issues with ovirt hosts on CentOS 8-stream? Any form of help is welcome, as I'm running out of ideas.

4 4

Patching issue on RHEL 8.7-8.8
by jamesroark＠gmail.com 23 May '23

23 May '23

After applying RHEL updates for the recent upgrade from 8.7 to 8.8, I started getting some package problems on my oVirt engine and hosts. Perhaps someone can help me figure out what is going on. Environment: oVirt 4.5.4-1.el8 Stand alone engine - Red Hat Enterprise Linux release 8.7 (Ootpa) RHEL hosts - Red Hat Enterprise Linux release 8.7 (Ootpa) # yum update Updating Subscription Management repositories. Last metadata expiration check: 3:01:05 ago on Fri 19 May 2023 09:43:55 AM EDT. Error: Problem: installed package centos-stream-release-8.6-1.el8.noarch obsoletes redhat-release < 9 provided by redhat-release-8.8-0.8.el8.x86_64 - cannot install the best update candidate for package redhat-release-8.7-0.3.el8.x86_64 - problem with installed package centos-stream-release-8.6-1.el8.noarch (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) # yum update --nobest Updating Subscription Management repositories. Last metadata expiration check: 3:01:25 ago on Fri 19 May 2023 09:43:55 AM EDT. Dependencies resolved. Problem: installed package centos-stream-release-8.6-1.el8.noarch obsoletes redhat-release < 9 provided by redhat-release-8.8-0.8.el8.x86_64 - cannot install the best update candidate for package redhat-release-8.7-0.3.el8.x86_64 - problem with installed package centos-stream-release-8.6-1.el8.noarch Nothing to do. Complete! I've applied the https://ovirt.org/download/install_on_rhel.html suggestions. When I try to "Install nightly oVirt master snapshot" as suggested, I also get an error: # dnf copr enable -y ovirt/ovirt-master-snapshot centos-stream-8 Updating Subscription Management repositories. Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-…>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Error: Failed to connect to https://copr.fedorainfracloud.org/coprs/ovirt/ovirt-master-snapshot/repo/ce…: Error

2 2

Ovirt 4.5.0 Support (End of Life Date)
by masood.ahmed＠digital.mod.uk 23 May '23

23 May '23

Hi, I am working on a project and we would like to utilise (oVirt 4.5.) as the platform for our enterprise infrastructure. We have arrived at this juncture because of a range of considerations related to hardware and software availability and compatibility. My question is if there is on-going vendor \ professional support for oVirt moving forward, as one of my colleagues spoke with Red Hat, who stated they are going to end their support for the product. we will not gain security accreditation for our project unless we have professional support available, community support only is not sufficient, Any ideas of firms available for a support contract for oVirt 4.5.0? thanks

2 1

constant error in enfine lof and Ovirt dashboard.
by eevans＠digitaldatatechs.com 22 May '23

22 May '23

My setup: CentOS 7 with Gluster 9.6 managed outside of engine, includes 3 servers plusdt the engine host. engine is a standalong but controls the 3 managed gluster volumes hosts. One of the hosts manages the gluster volume. I have used this setup for years and have never seen this on the engine host, but I have on the gluster volume servers. engine.log: 2023-05-22 15:58:33,020-04 INFO [org.ovirt.engine.core.vdsbroker.gluster.Gluste rServersListVDSCommand] (DefaultQuartzScheduler6) [235e97d6] FINISH, GlusterServ ersListVDSCommand, return: [192.168.254.252/24:CONNECTED, kvm04.digitaldatatechs .com:CONNECTED, kvm02.digitaldatatechs.com:CONNECTED], log id: 513632a0 2023-05-22 15:58:33,032-04 INFO [org.ovirt.engine.core.vdsbroker.gluster.AddGlu sterServerVDSCommand] (DefaultQuartzScheduler6) [235e97d6] START, AddGlusterServ erVDSCommand(HostName = kvm02, AddGlusterServerVDSParameters:{hostId='41b5df10-e d0a-4d6a-b375-c77ae9b681b6'}), log id: 6b6b5c97 2023-05-22 15:58:36,237-04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghan dling.AuditLogDirector] (DefaultQuartzScheduler6) [235e97d6] EVENT_ID: GLUSTER_S ERVER_ADD_FAILED(4,436), Failed to add host kvm02 into Cluster ovirt_cluster. Ad d host failed: rc=107 out=() err=['Probe returned with Transport endpoint is not connected'] This shows up about eveny 90 seconds. No other issues and the host is up, volume is up. Triple checked firewalld and even disabled it as a test. SELinux is disabled. I'm not sure what I'm missing. Everything looks great in the cockpit. Any help is appreciated. Thanks in advance.

1 0

Ovirt 4.5 deploy failed
by Selçuk N 22 May '23

22 May '23

Hello, I'm trying to install Ovirt 4.5 and I got the following error. FAILED! => {"attempts": 50, "changed": false, "msg": "Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials."} The node and hosted-engine vm password is the same and does not have any problem. Here are detailed logs. What am I doing wrong? Thank you. Regards 2023-05-18 18:49:25,924+0000 DEBUG ansible on_any args localhost TASK: ovirt.ovirt.hosted_engine_setup : include_tasks kwargs 2023-05-18 18:49:26,601+0000 INFO ansible ok {'status': 'OK', 'ansible_type': 'task', 'ansible_playbook': '/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml', 'ansible_host': 'localhost', 'ansible_task': '', 'task_duration': 1} 2023-05-18 18:49:26,601+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5580> kwargs 2023-05-18 18:49:26,644+0000 DEBUG ansible on_any args /usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/auth_sso.yml (args={} vars={}): [localhost] kwargs 2023-05-18 18:49:27,317+0000 INFO ansible task start {'status': 'OK', 'ansible_type': 'task', 'ansible_playbook': '/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml', 'ansible_task': 'ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials'} 2023-05-18 18:49:27,317+0000 DEBUG ansible on_any args TASK: ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials kwargs is_conditional:False 2023-05-18 18:49:27,318+0000 DEBUG ansible on_any args localhost TASK: ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials kwargs 2023-05-18 18:49:29,447+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970781b430> kwargs 2023-05-18 18:49:40,175+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9190> kwargs 2023-05-18 18:49:50,869+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079cb460> kwargs 2023-05-18 18:50:01,565+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9190> kwargs 2023-05-18 18:50:12,258+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707864b50> kwargs 2023-05-18 18:50:22,932+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9b80> kwargs 2023-05-18 18:50:33,638+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9709cb0370> kwargs 2023-05-18 18:50:44,319+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9190> kwargs 2023-05-18 18:50:54,990+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9709cb0370> kwargs 2023-05-18 18:51:05,683+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9b80> kwargs 2023-05-18 18:51:16,375+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9709cb0370> kwargs 2023-05-18 18:51:27,062+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9190> kwargs 2023-05-18 18:51:37,766+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9709cb0a60> kwargs 2023-05-18 18:51:48,422+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97077c3670> kwargs 2023-05-18 18:51:59,125+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97078c2a30> kwargs 2023-05-18 18:52:09,821+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5730> kwargs 2023-05-18 18:52:20,489+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707a41ac0> kwargs 2023-05-18 18:52:31,188+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970781b700> kwargs 2023-05-18 18:52:41,873+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707894580> kwargs 2023-05-18 18:52:52,559+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707894760> kwargs 2023-05-18 18:53:03,260+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079f3d00> kwargs 2023-05-18 18:53:13,923+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa14f0> kwargs 2023-05-18 18:53:24,622+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707a01310> kwargs 2023-05-18 18:53:35,311+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97076b0700> kwargs 2023-05-18 18:53:45,964+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa14f0> kwargs 2023-05-18 18:53:56,661+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970771afa0> kwargs 2023-05-18 18:54:07,346+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa15e0> kwargs 2023-05-18 18:54:18,018+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5730> kwargs 2023-05-18 18:54:28,715+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5c40> kwargs 2023-05-18 18:54:39,387+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97076f8cd0> kwargs 2023-05-18 18:54:50,067+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa17c0> kwargs 2023-05-18 18:55:00,773+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5730> kwargs 2023-05-18 18:55:11,426+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707a36c40> kwargs 2023-05-18 18:55:22,121+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5c40> kwargs 2023-05-18 18:55:32,809+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97077b5880> kwargs 2023-05-18 18:55:43,463+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97075dc0d0> kwargs 2023-05-18 18:55:54,157+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa14f0> kwargs 2023-05-18 18:56:04,841+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa5c40> kwargs 2023-05-18 18:56:15,500+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97079b9250> kwargs 2023-05-18 18:56:26,193+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97076b05e0> kwargs 2023-05-18 18:56:36,875+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970787c790> kwargs 2023-05-18 18:56:47,557+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970769ba00> kwargs 2023-05-18 18:56:58,257+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707aa14f0> kwargs 2023-05-18 18:57:08,912+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97076f8c10> kwargs 2023-05-18 18:57:19,612+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97076f8040> kwargs 2023-05-18 18:57:30,302+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97077b5160> kwargs 2023-05-18 18:57:40,969+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970769b160> kwargs 2023-05-18 18:57:51,664+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9707516b80> kwargs 2023-05-18 18:58:02,347+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97073f1c40> kwargs 2023-05-18 18:58:13,021+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f970769bb20> kwargs 2023-05-18 18:58:24,784+0000 DEBUG var changed: host "localhost" var "ansible_failed_task" type "<class 'dict'>" value: "{ "action": "ovirt_auth", "any_errors_fatal": false, "args": { "_ansible_check_mode": false, "_ansible_debug": false, "_ansible_diff": false, "_ansible_keep_remote_files": false, "_ansible_module_name": "ovirt_auth", "_ansible_no_log": false, "_ansible_remote_tmp": "~/.ansible/tmp", "_ansible_selinux_special_fs": [ "fuse", "nfs", "vboxsf", "ramfs", "9p", "vfat" ], "_ansible_shell_executable": "/bin/sh", "_ansible_socket": null, "_ansible_string_conversion_action": "warn", "_ansible_syslog_facility": "LOG_USER", "_ansible_tmpdir": "/root/.ansible/tmp/ansible-tmp-1684436303.0466125-36573-187227954552032/", "_ansible_verbosity": 0, "_ansible_version": "2.13.5", "insecure": true }, "async": 0, "async_val": 0, "become": false, "become_exe": null, "become_flags": null, "become_method": "sudo", "become_user": null, "changed_when": [], "check_mode": false, "collections": [ "ovirt.ovirt", "ansible.builtin" ], "connection": "local", "debugger": null, "delay": 10, "delegate_facts": null, "delegate_to": null, "diff": false, "environment": [ { "OVIRT_PASSWORD": "**FILTERED**", "OVIRT_URL": "https://eng.xxxx.net/ovirt-engine/api", "OVIRT_USERNAME": "admin@internal" } ], "failed_when": [], "finalized": true, "ignore_errors": null, "ignore_unreachable": null, "loop": null, "loop_control": null, "loop_with": null, "module_defaults": [], "name": "Obtain SSO token using username/password credentials", "no_log": null, "notify": null, "poll": 15, "port": null, "register": "ovirt_sso_auth", "remote_user": null, "retries": 50, "run_once": null, "squashed": true, "tags": [ "never", "bootstrap_local_vm", "never" ], "throttle": 0, "timeout": 0, "until": [ "ovirt_sso_auth is succeeded" ], "uuid": "1866daab-9d24-cf71-0985-00000000181c", "vars": {}, "when": [] }" 2023-05-18 18:58:24,784+0000 DEBUG var changed: host "localhost" var "ansible_failed_result" type "<class 'dict'>" value: "{ "_ansible_no_log": null, "_ansible_parsed": true, "attempts": 50, "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_auth_payload_x_h__rn9/ansible_ovirt_auth_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_auth.py\", line 287, in main\n File \"/usr/lib64/python3.6/site-packages/ovirtsdk4/__init__.py\", line 382, in authenticate\n self._sso_token = self._get_access_token()\n File \"/usr/lib64/python3.6/site-packages/ovirtsdk4/__init__.py\", line 627, in _get_access_token\n sso_error[1]\novirtsdk4.AuthError: Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials.\n", "failed": true, "invocation": { "module_args": { "ca_file": null, "compress": true, "headers": null, "hostname": null, "insecure": true, "kerberos": false, "ovirt_auth": null, "password": null, "state": "present", "timeout": 0, "token": null, "url": null, "username": null } }, "msg": "Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials." }" 2023-05-18 18:58:24,784+0000 ERROR ansible failed { "ansible_host": "localhost", "ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml", "ansible_result": { "_ansible_no_log": null, "attempts": 50, "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_auth_payload_x_h__rn9/ansible_ovirt_auth_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_auth.py\", line 287, in main\n File \"/usr/lib64/python3.6/site-packages/ovirtsdk4/__init__.py\", line 382, in authenticate\n self._sso_token = self._get_access_token()\n File \"/usr/lib64/python3.6/site-packages/ovirtsdk4/__init__.py\", line 627, in _get_access_token\n sso_error[1]\novirtsdk4.AuthError: Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials.\n", "invocation": { "module_args": { "ca_file": null, "compress": true, "headers": null, "hostname": null, "insecure": true, "kerberos": false, "ovirt_auth": null, "password": null, "state": "present", "timeout": 0, "token": null, "url": null, "username": null } }, "msg": "Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials." }, "ansible_task": "Obtain SSO token using username/password credentials", "ansible_type": "task", "status": "FAILED", "task_duration": 538 } 2023-05-18 18:58:24,784+0000 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f97073f1520> kwargs ignore_errors:None 2023-05-18 18:58:25,487+0000 DEBUG var changed: host "localhost" var "ovirt_sso_auth" type "<class 'dict'>" value: "{ "attempts": 50, "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_auth_payload_x_h__rn9/ansible_ovirt_auth_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_auth.py\", line 287, in main\n File \"/usr/lib64/python3.6/site-packages/ovirtsdk4/__init__.py\", line 382, in authenticate\n self._sso_token = self._get_access_token()\n File \"/usr/lib64/python3.6/site-packages/ovirtsdk4/__init__.py\", line 627, in _get_access_token\n sso_error[1]\novirtsdk4.AuthError: Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials.\n", "failed": true, "msg": "Error during SSO authentication access_denied : Cannot authenticate user Invalid user credentials." }" 2023-05-18 18:58:25,487+0000 INFO ansible task start {'status': 'OK', 'ansible_type': 'task', 'ansible_playbook': '/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml', 'ansible_task': 'ovirt.ovirt.hosted_engine_setup : Sync on engine machine'} 2023-05-18 18:58:25,487+0000 DEBUG ansible on_any args TASK: ovirt.ovirt.hosted_engine_setup : Sync on engine machine kwargs is_conditional:False

2 2

ovirt node
by skhurtsilava＠cellfie.ge 22 May '23

22 May '23

Hello Guys I installed oVirt Node 4.4 and I want to deploy Hosted Engine but i get this error [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "hostname 'ovirt.bee.moitel.local' doesn't uniquely match the interface 'ens192' selected for the management bridge; it matches also interface with IP ['fe80::9a5b:2039:fe49:5252', '192.168.222.1', 'fd00:1234:5678:900::1']. Please make sure that the hostname got from the interface for the management network resolves only there.\n"} How can i fix this error?

2 1

oVirt and Oracle Linux Virtualization Manager
by Andrei Verovski 22 May '23

22 May '23

Hi, Does Oracle plan to continue active development of oVirt, since it is released as Oracle Linux Virtualization Manager ? with best regards Andrei

1 0

Re: Basic authentication to Rest api not working 4.5.4
by kishorekumar.goli＠gmail.com 22 May '23

22 May '23

Thanks Alexei for the response. I see httpd configuration is updated to use oauth. I see below configuration updated in /etc/httpd/conf.d/internalsso-openidc.conf <LocationMatch ^/ovirt-engine/api($|/)> AuthType oauth20 Require valid-user </LocationMatch> I dont see any release notes about removal of basic authentication in 4.5.x. So I wanted to know if this is mentioned anywhere in the documentation.

2 1