- Users - oVirt List Archives

ovirt change of email alert
by Alex K 18 Feb '18

18 Feb '18

Hi all, I had put a specif email alert during the deploy and then I wanted to change it. I did the following: At one of the hosts ra: hosted-engine --set-shared-config destination-emails alerts(a)domain.com --type=broker systemctl restart ovirt-ha-broker.service I had to do the above since changing the email from GUI did not have any effect. After the above the emails are received at the new email address but the cluster seems to have some issue recognizing the state of engine. i am flooded with emails that " EngineMaybeAway-EngineUnexpectedlyDown " I have restarted at each host also the ovirt-ha-agent.service. Did put the cluster to global maintenance and then disabled global maintenance. host agent logs I have: MainThread::ERROR::2018-02-18 11:12:20,751::hosted_engine::720::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_sanlock) cannot get lock on host id 1: host already holds lock on a different host id One other host logs: MainThread::INFO::2018-02-18 11:20:23,692::states::682::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(score) Score is 0 due to unexpected vm shutdown at Sun Feb 18 11:15:13 2018 MainThread::INFO::2018-02-18 11:20:23,692::hosted_engine::453::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUnexpectedlyDown (score: 0) The engine status on 3 hosts is: hosted-engine --vm-status --== Host 1 status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : v0 Host ID : 1 Engine status : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"} Score : 0 stopped : False Local maintenance : False crc32 : cfd15dac local_conf_timestamp : 4721144 Host timestamp : 4721144 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=4721144 (Sun Feb 18 11:20:33 2018) host-id=1 score=0 vm_conf_refresh_time=4721144 (Sun Feb 18 11:20:33 2018) conf_on_shared_storage=True maintenance=False state=EngineUnexpectedlyDown stopped=False timeout=Tue Feb 24 15:29:44 1970 --== Host 2 status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : v1 Host ID : 2 Engine status : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"} Score : 0 stopped : False Local maintenance : False crc32 : 5cbcef4c local_conf_timestamp : 2499416 Host timestamp : 2499416 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=2499416 (Sun Feb 18 11:20:46 2018) host-id=2 score=0 vm_conf_refresh_time=2499416 (Sun Feb 18 11:20:46 2018) conf_on_shared_storage=True maintenance=False state=EngineUnexpectedlyDown stopped=False timeout=Thu Jan 29 22:18:42 1970 --== Host 3 status ==-- conf_on_shared_storage : True Status up-to-date : False Hostname : v2 Host ID : 3 Engine status : unknown stale-data Score : 3400 stopped : False Local maintenance : False crc32 : f064d529 local_conf_timestamp : 2920612 Host timestamp : 2920611 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=2920611 (Sun Feb 18 10:47:31 2018) host-id=3 score=3400 vm_conf_refresh_time=2920612 (Sun Feb 18 10:47:32 2018) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False Putting each host at maintenance then activating them back does not resolve the issue. Seems I have to avoid defining email address during deploy and have it set only later at GUI. How one can recover from this situation? Thanx, Alex

1 0

Re: [ovirt-users] Import Domain and snapshot issue ... please help !!!
by Enrico Becchetti 18 Feb '18

18 Feb '18

This is a cryptographically signed message in MIME format. --------------ms050607070104000301070509 Content-Type: multipart/alternative; boundary="------------ED6337BCF2BC492470FB68A8" Content-Language: it-IT This is a multi-part message in MIME format. --------------ED6337BCF2BC492470FB68A8 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: quoted-printable =C2=A0 Hi, also you can download them throught these links: https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb Thanks again !!!! Best Regards Enrico > Il 13/02/2018 14:52, Maor Lipchuk ha scritto: >> >> >> On Tue, Feb 13, 2018 at 3:51 PM, Maor Lipchuk <mlipchuk(a)redhat.com=20 >> <mailto:mlipchuk@redhat.com>> wrote: >> >> >> On Tue, Feb 13, 2018 at 3:42 PM, Enrico Becchetti >> <enrico.becchetti(a)pg.infn.it >> <mailto:enrico.becchetti@pg.infn.it>> wrote: >> >> see the attach files please ... thanks for your attention !!! >> >> >> >> Seems like the engine logs does not contain the entire process, >> can you please share older logs since the import operation? >> >> >> And VDSM logs as well from your host >> >> Best Regards >> Enrico >> >> >> Il 13/02/2018 14:09, Maor Lipchuk ha scritto: >>> >>> >>> On Tue, Feb 13, 2018 at 1:48 PM, Enrico Becchetti >>> <enrico.becchetti(a)pg.infn.it >>> <mailto:enrico.becchetti@pg.infn.it>> wrote: >>> >>> =C2=A0Dear All, >>> I have been using ovirt for a long time with three >>> hypervisors and an external engine running in a centos vm= . >>> >>> This three hypervisors have HBAs and access to fiber >>> channel storage. Until recently I used version 3.5, then >>> I reinstalled everything from scratch and now I have 4.2.= >>> >>> Before formatting everything, I detach the storage data >>> domani (FC) with the virtual machines and reimported it >>> to the new 4.2 and all went well. In >>> this domain there were virtual machines with and without >>> snapshots. >>> >>> Now I have two problems. The first is that if I try to >>> delete a snapshot the process is not end successful and >>> remains hanging and the second problem is that >>> in one case I lost the virtual machine !!! >>> >>> >>> >>> Not sure that I fully understand the scneario.' >>> How was the virtual machine got lost if you only tried to >>> delete a snapshot? >>> >>> >>> So I need your help to kill the three running zombie >>> tasks because with taskcleaner.sh I can't do anything >>> and then I need to know how I can delete the old snapshot= s >>> made with the 3.5 without losing other data or without >>> having new processes that terminate correctly. >>> >>> If you want some log files please let me know. >>> >>> >>> >>> Hi Enrico, >>> >>> Can you please attach the engine and VDSM logs >>> >>> >>> Thank you so much. >>> Best Regards >>> Enrico >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org <mailto:Users@ovirt.org> >>> http://lists.ovirt.org/mailman/listinfo/users >>> <http://lists.ovirt.org/mailman/listinfo/users> >>> >>> >> >> --=20 >> ______________________________________________________________= _________ >> >> Enrico Becchetti Servizio di Calcolo e Reti= >> >> Istituto Nazionale di Fisica Nucleare - Sezione di Perugia >> Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) >> Phone:+39 075 5852777 <tel:+39%20075%20585%202777> = Mail: Enrico.Becchetti<at>pg.infn.it <http://pg.infn.it> >> ______________________________________________________________= ________ >> >> >> > > --=20 > _______________________________________________________________________= > > Enrico Becchetti Servizio di Calcolo e Reti > > Istituto Nazionale di Fisica Nucleare - Sezione di Perugia > Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) > Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it > ______________________________________________________________________ --=20 _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it ______________________________________________________________________ --------------ED6337BCF2BC492470FB68A8 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf= -8"> </head> <body text=3D"#000000" bgcolor=3D"#FFFFFF"> =C2=A0 Hi, <div class=3D"moz-cite-prefix">also you can download them throught these<br> links:<br> <br> <a class=3D"moz-txt-link-freetext" href=3D"https://owncloud.pg.infn= =2Eit/index.php/s/QpsTyGxtRTPYRTD">https://owncloud.pg.infn.it/index.php/= s/QpsTyGxtRTPYRTD</a><br> </div> <a class=3D"moz-txt-link-freetext" href=3D"https://owncloud.pg.infn.i= t/index.php/s/ph8pLcABe0nadeb">https://owncloud.pg.infn.it/index.php/s/ph= 8pLcABe0nadeb</a><br> <br> Thanks again !!!!<br> Best Regards<br> Enrico<br> <br> <blockquote type=3D"cite" cite=3D"mid:54306728-1b78-6634-0bcb-26f836cb1cf9@pg.infn.it"> <div class=3D"moz-cite-prefix"> Il 13/02/2018 14:52, Maor Lipchuk h= a scritto:<br> </div> <blockquote type=3D"cite" cite=3D"mid:CAJ1JNOfTOG850gVAznZpC1qfRPU1ws9ow3OGSJUK=3Dk+dVAzjdg@mail.gm= ail.com"> <div dir=3D"ltr"><br> <div class=3D"gmail_extra"><br> <div class=3D"gmail_quote">On Tue, Feb 13, 2018 at 3:51 PM, Maor Lipchuk <span dir=3D"ltr"><<a href=3D"mailto:mlipchuk@redhat.com" target=3D"_blank" moz-do-not-send=3D"true">mlipchuk(a)redhat.com</a>></s= pan> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div dir=3D"ltr"> <div class=3D"gmail_extra"><br> <div class=3D"gmail_quote"><span class=3D"">On Tue, F= eb 13, 2018 at 3:42 PM, Enrico Becchetti <span dir=3D"ltr"><<a href=3D"mailto:enrico.becchetti@pg.infn.it" target=3D"_blank" moz-do-not-send=3D"true">en= rico.becchetti(a)pg.infn.it</a>></span> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> <div bgcolor=3D"#FFFFFF"> <div class=3D"m_1867120190031562186gmail-m_-8783= 667902876592593moz-cite-prefix">see the attach files please ... thanks for your attention !!!<br> </div> </div> </blockquote> <div class=3D"gmail_quote"><br> </div> <div class=3D"gmail_quote"><br> </div> </span>Seems like the engine logs does not contain the entire process, can you please share older logs since the import operation?</div> </div> </div> </blockquote> <div><br> </div> <div>And VDSM logs as well from your host</div> <div>=C2=A0</div> <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div dir=3D"ltr"> <div class=3D"gmail_extra"> <div class=3D"gmail_quote"> <div> <div class=3D"h5"> <div>=C2=A0</div> <blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> <div bgcolor=3D"#FFFFFF"> <div class=3D"m_1867120190031562186gmail-m_-87= 83667902876592593moz-cite-prefix"> Best Regards<br> Enrico <div> <div class=3D"m_1867120190031562186gmail-h= 5"><br> <br> Il 13/02/2018 14:09, Maor Lipchuk ha scritto:<br> </div> </div> </div> <div> <div class=3D"m_1867120190031562186gmail-h5"= > <blockquote type=3D"cite"> <div dir=3D"ltr"><br> <div class=3D"gmail_extra"><br> <div class=3D"gmail_quote">On Tue= , Feb 13, 2018 at 1:48 PM, Enrico Becchetti <span dir=3D"ltr"><<a href=3D"mailto:enrico.becch= etti(a)pg.infn.it" target=3D"_blank" moz-do-not-send=3D"true">en= rico.becchetti(a)pg.infn.it</a>></span> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">=C2=A0Dear All,<br> I have been using ovirt for a long time with three hypervisors and an external engine running in a centos vm .<br> <br> This three hypervisors have HBAs and access to fiber channel storage. Until recently I used version 3.5, then I reinstalled everything from scratch and now I have 4.2.<br> <br> Before formatting everything, I detach the storage data domani (FC) with the virtual machines and reimported it to the new 4.2 and all went well. In<br>= this domain there were virtual machines with and without snapshots.<br> <br> Now I have two problems. The first is that if I try to delete a snapshot the process is not end successful and remains hanging and the second problem is that<br> in one case I lost the virtual machine !!!<br> </blockquote> <div><br> </div> <div><br> </div> <div>Not sure that I fully understand the scneario.'</di= v> <div>How was the virtual machine got lost if you only tried to delete a snapshot?</= div> <div>=C2=A0</div> <blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> <br> So I need your help to kill the three running zombie tasks because with taskcleaner.sh I can't do anything and then I need to know how I can delete the old snapshots<br> made with the 3.5 without losing other data or without having new processes that terminate correctly.<br> <br> If you want some log files please let me know.<br> </blockquote> <div><br> </div> <div><br> </div> <div>Hi Enrico,</div> <div><br> </div> <div>Can you please attach the engine and VDSM logs</div> <div>=C2=A0=C2=A0</div> <blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> <br> Thank you so much.<br> Best Regards<span class=3D"m_1867120190031562= 186gmail-m_-8783667902876592593gmail-HOEnZb"><font color=3D"#888888"><br> Enrico<br> <br> <br> </font></span><br> ______________________________<wbr>_________________<br> Users mailing list<br> <a href=3D"mailto:Users@ovirt.= org" target=3D"_blank" moz-do-not-send=3D"true">Us= ers(a)ovirt.org</a><br> <a href=3D"http://lists.ovirt.= org/mailman/listinfo/users" rel=3D"noreferrer" target=3D"_blank" moz-do-not-send=3D"true">ht= tp://lists.ovirt.org/mailman<wbr>/listinfo/users</a><br> <br> </blockquote> </div> <br> </div> </div> </blockquote> <p><br> </p> </div> </div> <span class=3D"m_1867120190031562186gmail-HOEnZ= b"><font color=3D"#888888"> <pre class=3D"m_1867120190031562186gmai= l-m_-8783667902876592593moz-signature" cols=3D"72">--=20 ______________________________<wbr>______________________________<wbr>___= ________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:<a href=3D"tel:+39%20075%20585%202777" value=3D"+390755852777" targ= et=3D"_blank" moz-do-not-send=3D"true">+39 075 5852777</a> Ma= il: Enrico.Becchetti<at><a href=3D"http://pg.infn.it" target=3D"_bl= ank" moz-do-not-send=3D"true">pg.infn.it</a> ______________________________<wbr>______________________________<wbr>___= _______ </pre> </font></span></div> </blockquote> </div> </div> </div> <br> </div> </div> </blockquote> </div> <br> </div> </div> </blockquote> <p><br> </p> <pre class=3D"moz-signature" cols=3D"72">--=20 _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn= =2Eit ______________________________________________________________________ </= pre> </blockquote> <p><br> </p> <pre class=3D"moz-signature" cols=3D"72">--=20 _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn= =2Eit ______________________________________________________________________ </= pre> </body> </html> --------------ED6337BCF2BC492470FB68A8-- --------------ms050607070104000301070509 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: Firma crittografica S/MIME MIAGCSqGSIb3DQEHAqCAMIACAQExDzANBglghkgBZQMEAgEFADCABgkqhkiG9w0BBwEAAKCC BZMwggWPMIIDd6ADAgECAgMAkbUwDQYJKoZIhvcNAQELBQAwQzELMAkGA1UEBhMCSVQxDTAL BgNVBAoTBElORk4xJTAjBgNVBAMTHElORk4gQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkwHhcN MTcwMjIyMTM0NDU1WhcNMTgwMjIyMTM0NDU1WjBoMQswCQYDVQQGEwJJVDENMAsGA1UEChME SU5GTjEdMBsGA1UECxMUUGVyc29uYWwgQ2VydGlmaWNhdGUxEDAOBgNVBAcTB1BlcnVnaWEx GTAXBgNVBAMTEEVucmljbyBCZWNjaGV0dGkwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEK AoIBAQDM9hqLromxJFRrJxIkfgn+pYWI6IJmy0zu0OH6x/zrp8eEpTkI6Rlngg3jVexYWldr obFy6TSSW429GDbkszGjy/yNJKtgQnRama8Izihm/RY5m/j8iTqvw4RPdk6CrxO8AD3FGiR8 sSImHzBagHmvAHwA9Ba5gTCJVgRO4MsGAMaxKNkwUrGIZK+Rmi5zVLW2yfjqsSiO4sCZDXey /Ndm17b8FF5HG5rNWjwG8A0y2s25AWTxURvM1gNnTXl8zOPWmtvZcpp5dBp3VlA6N/0Pk3uy klBIBEEK67W9+vqcDfqNON24hL+Cm3OsGrW/XpIIb/oQNdLp5dtSUG3qTn8BAgMBAAGjggFl MIIBYTAMBgNVHRMBAf8EAjAAMA4GA1UdDwEB/wQEAwIEsDAdBgNVHSUEFjAUBggrBgEFBQcD AgYIKwYBBQUHAwQwPwYDVR0fBDgwNjA0oDKgMIYuaHR0cDovL3NlY3VyaXR5LmZpLmluZm4u aXQvQ0EvSU5GTi1DQS0yMDE1LmNybDAlBgNVHSAEHjAcMAwGCisGAQQB0SMKAQgwDAYKKoZI hvdMBQICATAdBgNVHQ4EFgQUiw04Jlbw6qOmGOQVq8eXcDhG08cwcwYDVR0jBGwwaoAUQ4xN /uyWyunvCqR9wZ0C5Z+9loChR6RFMEMxCzAJBgNVBAYTAklUMQ0wCwYDVQQKEwRJTkZOMSUw IwYDVQQDExxJTkZOIENlcnRpZmljYXRpb24gQXV0aG9yaXR5ggkAsyYCxn1JJicwJgYDVR0R BB8wHYEbZW5yaWNvLmJlY2NoZXR0aUBwZy5pbmZuLml0MA0GCSqGSIb3DQEBCwUAA4ICAQBY SsKt/XTw+Kc+Vc1pjVi5uuEf/oP0U/nQQywIyM+rhbkeHy8c1eokA5k8Xnycwx8kzAh0e2lz W0a8gM2tSI799DF6N8s5NfCo6RoPciSYA+7edylWlE8TfGoJ2I5pNZV3IctYlfokSiz59EPz CNhQsfVbF8qkINB/J8HlbKvm0ERDOAse1pBjNwdU3Lt5nxmw3Yd08b9jPw4g5eMSmW4XmRzP kERTjAQxophM4OIKb0Vj0XfqONBt+LansgyzHcWbo+aKJmgQDvdumnGsNoQbRI4TxjnlB4Dg Vgbvo0mKZYfu0Sr2U9+wpRJ0U/+YljbVEuzmD9hl/eBRoBgIhx9dwoBYsuXEkWo8RkgeVpnt z8ze4zubi7+4BnuuVLZeq1VWQFy1qU7KGTou4a6B+gM88ZviGJI6o03oDhE976uOST5v5pZ7 q7uhgBd8FW594PAWdI1oPQ5YVKX+NX6XrXwf7GYf18OTmV3kNxWllrNVz3YLLhbnSSf1o3sd FLZXMu1r4dbeQuk7duYa/c/POyl3f8H/JGAPIOVQWfotMm8X/WET9Rhglc5Ead18rZPePTpj zyjfB+k0C0ZH1cM7ynTpMDxrk9X7Zq4wbKFlzG1OVKSzTiZGLQrjhciXoSDHs4J9RNM5ar2G IYWhWFkQ+tVY/73EOsNHHXjk438qUUD33jGCAwgwggMEAgEBMEowQzELMAkGA1UEBhMCSVQx DTALBgNVBAoTBElORk4xJTAjBgNVBAMTHElORk4gQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkC AwCRtTANBglghkgBZQMEAgEFAKCCAY8wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkq hkiG9w0BCQUxDxcNMTgwMjE0MDgxMTQyWjAvBgkqhkiG9w0BCQQxIgQgWNGQtbBzZ41OMyBw nGzdNpVSgpH9TRdai8vep1YqQYAwWQYJKwYBBAGCNxAEMUwwSjBDMQswCQYDVQQGEwJJVDEN MAsGA1UEChMESU5GTjElMCMGA1UEAxMcSU5GTiBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eQID AJG1MFsGCyqGSIb3DQEJEAILMUygSjBDMQswCQYDVQQGEwJJVDENMAsGA1UEChMESU5GTjEl MCMGA1UEAxMcSU5GTiBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eQIDAJG1MGwGCSqGSIb3DQEJ DzFfMF0wCwYJYIZIAWUDBAEqMAsGCWCGSAFlAwQBAjAKBggqhkiG9w0DBzAOBggqhkiG9w0D AgICAIAwDQYIKoZIhvcNAwICAUAwBwYFKw4DAgcwDQYIKoZIhvcNAwICASgwDQYJKoZIhvcN AQEBBQAEggEAcjFESE65z2g5Tc/bjY5/qPeWr9bljHuiUHx41Yq9AbJi8ODtkL+g4ntC2Upd H964sFzA+0RoakYOwDJH4dAMgbdrX93uR5V3/s5cjMuaxaU9ko+dgVmjq1ptl1mAOJVWCcsg 8p1lC250ursn0QnU4gURm4KT+11PsrCEF5qrbuIXvsuqiOsLA70wYCq4PSRW4sqNLTaXR8oc 3g4v9jP1aolER0UTA7UQapU928/mYZZkTXCCAsKfDhQvEVe9/QJyikRxXsuH8PU6ywKp25sK WXc/1dwteceSyz8aCBM6e4+mhGe+RirP7b9Rf2sqTJf+m2SSHwJ2ARzcVjlHQBxGZgAAAAAA AA== --------------ms050607070104000301070509--

2 6

database restoration
by Fabrice Bacchella 18 Feb '18

18 Feb '18

I'm running a restoration test and getting the following log generated by engine-backup --mode=restore: pg_restore: [archiver (db)] Error while PROCESSING TOC: pg_restore: [archiver (db)] Error from TOC entry 4274; 0 0 COMMENT EXTENSION plpgsql pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension plpgsql Command was: COMMENT ON EXTENSION plpgsql IS 'PL/pgSQL procedural language'; pg_restore: WARNING: no privileges could be revoked for "public" pg_restore: WARNING: no privileges could be revoked for "public" pg_restore: WARNING: no privileges were granted for "public" pg_restore: WARNING: no privileges were granted for "public" WARNING: errors ignored on restore: 1 Do I need to worry, as this error is ignored ?

2 2

Unable to put Host into Maintenance mode
by Mark Steele 16 Feb '18

16 Feb '18

I have a host that is currently reporting down with NO VM's on it or associated with it. However when I attempt to put it into maintenance mode, I get the following error: Host hv-01 cannot change into maintenance mode - not all Vms have been migrated successfully. Consider manual intervention: stopping/migrating Vms: <UNKNOWN> (User: admin) I am running oVirt Engine Version: 3.5.0.1-1.el6 *** *Mark Steele* CIO / VP Technical Operations | TelVue Corporation TelVue - We Share Your Vision 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054 800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com twitter: http://twitter.com/telvue | facebook: https://www.facebook.com/telvue

7 11

Username / password for ovirt-shell
by Mark Steele 16 Feb '18

16 Feb '18

Hello, I'm not the original system architect of our Cluster and I'm not able to locate any documentation regarding the username and password for our ovirt-shell CLI. Is there a config file on the HostedEngine that would point me in the right direction? Best regards, *** *Mark Steele* CIO / VP Technical Operations | TelVue Corporation TelVue - We Share Your Vision 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054 800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com twitter: http://twitter.com/telvue | facebook: https://www.facebook.com/telvue

1 1

Requirements for basic host
by Mark Steele 16 Feb '18

16 Feb '18

Hello again, I'm building a new host for my cluster and have a quick question about required software for joining the host to my cluster. In my notes from a previous colleague, I am instructed to do the following: yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm yum install ovirt-hosted-engine-setup hosted-engine --deploy We already have a HostedEngine running on another server in the cluster - so do I need to install ovirt-hosted-engine-setup and then deploy it for this server to join the cluster and operate properly? As always - thank you for your time. *** *Mark Steele* CIO / VP Technical Operations | TelVue Corporation TelVue - We Share Your Vision 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054 800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com twitter: http://twitter.com/telvue | facebook: https://www.facebook.com/telvue

2 2

ERROR - some other host already uses IP ###.###.###.###
by Mark Steele 16 Feb '18

16 Feb '18

Good morning, We had a storage crash early this morning that messed up a couple of our ovirt hosts. Networking seemed to be the biggest issue. I have decided to remove the bridge information in /etc/sysconfig/network-scripts and ip the nics in order to re-import them into my ovirt installation (I have already removed the hosts). One of the NIC's refuses to come up and is generating the following error: ERROR : [/etc/sysconfig/network-scripts/ifup-eth] Error, some other host (0C:C4:7A:5B:11:5C) already uses address ###.###.###.###. When I ARP on this server, I do not see that Mac address - and none of my other hosts are using it either. I'm not sure where to go next other than completely reinstalling Centos on this server and starting over. Ovirt version is oVirt Engine Version: 3.5.0.1-1.el6 OS version is CentOS Linux release 7.4.1708 (Core) Thank you *** *Mark Steele* CIO / VP Technical Operations | TelVue Corporation TelVue - We Share Your Vision 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054 800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com twitter: http://twitter.com/telvue | facebook: https://www.facebook.com/telvue

2 2

Internal Server Error while add Permission [cli]
by Thomas Fecke 16 Feb '18

16 Feb '18

--_000_077d1469b6bf4f3c886b50c69af94b2fDR1XEXCH01Besetcorp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hey dear Community, I work a bit with that ovirt shell. That worked pretty fine but I got some = Problems when I try to add Permission: What I want to do: Add a Role to an VM What I did: add permission --parent-vm-name vm1 --user-id user1 --role-id UserVmCreator Error: status: 500 reason: Internal Server Error detail: <html><head><title>Error</title></head><body>Internal Server Error</body></= html> Any other cli command works fine for me. What am I doing wrong? Thank you ! --_000_077d1469b6bf4f3c886b50c69af94b2fDR1XEXCH01Besetcorp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hey dear Community,<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I work a bit with that ovirt shell. That worked pret= ty fine but I got some Problems when I try to add Permission:<o:p></o:p></p= > <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">What I want to do:<o:p></o:p></p> <p class=3D"MsoNormal">Add a Role to an VM<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">What I did:<o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Ca= libri Light",sans-serif;mso-fareast-language:EN-GB">add permission --p= arent-vm-name vm1 --user-id user1 --role-id UserVmCreator<o:p></o:p></span>= </p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Error:<o:p></o:p></p> <p class=3D"MsoNormal">status: 500<o:p></o:p></p> <p class=3D"MsoNormal">  reason: Internal Server Error<o:p></o:p></p> <p class=3D"MsoNormal">  detail:<o:p></o:p></p> <p class=3D"MsoNormal"><html><head><title>Error</title= ></head><body>Internal Server Error</body></html&gt= ;<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Any other cli command works fine for me. What am I d= oing wrong? Thank you !<o:p></o:p></p> </div> </body> </html> --_000_077d1469b6bf4f3c886b50c69af94b2fDR1XEXCH01Besetcorp_--

2 1

XML error ovirt-4.2.1 release
by Ladislav Humenik 16 Feb '18

16 Feb '18

This is a multi-part message in MIME format. --------------3F038A49E1BAC4879CE7C6F3 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Hello all, we just tested the 4.2.0 release, worked fine so far. Yesterday just updated to the latest 4.2.1 and since then we can not send and receive response; the error has to do with the response to the server: checkContentType(XML_CONTENT_TYPE_RE, "XML", response.getFirstHeader("content-type").getValue()); it seems it is not XML type the error is: throw new Error("Failed to send request", e); Through the web api I can connect and get and see all, but through the SDK it exits. I've tried both 420 and 421 SDKs of ovirt. -- Ladislav Humenik --------------3F038A49E1BAC4879CE7C6F3 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Hello all,</p> <p><br> </p> <p>we just tested the 4.2.0 release, worked fine so far.</p> <p> Yesterday just updated to the latest 4.2.1 and since then we can not send and receive response; the error has to do with the response to the server:<br> </p> <p> <font face="Arial,sans-serif">checkContentType(XML_CONTENT_TYPE_RE, "XML", response.getFirstHeader("content-type").getValue());</font></p> <p>it seems it is not XML type</p> <p>the error is:</p> <p><span style="color: rgb(68, 68, 68); font-family: -apple-system, BlinkMacSystemFont, Roboto, "Helvetica Neue", Arial, sans-serif, "Apple Color Emoji", "Segoe UI", "Segoe UI Emoji", "Segoe UI Symbol", "Meiryo UI"; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); display: inline !important; float: none;"> <font size="+1"> throw new Error("Failed to send request", e);</font></span></p> <p>Through the web api I can connect and get and see all, but through the SDK it exits. I've tried both 420 and 421 SDKs of ovirt.</p> <p><br> </p> <pre class="moz-signature" cols="72">-- Ladislav Humenik</pre> </body> </html> --------------3F038A49E1BAC4879CE7C6F3--

1 0

Partition Trouble on oVirt Node
by Matt Simonsen 16 Feb '18

16 Feb '18

Hello all, This may not be oVirt specific (but it may be) so thank you in advance for any assistance. I have a system installed with oVirt Node Next 4.1.9 that was installed to /dev/sda I had a seperate RAID Volume /dev/sdb that should not have been used, but now that the operating system is loaded I'm struggling to get the device partitioned. I've tried mkfs.ext4 on the device and also pvcreate, with the errors below. I've also rebooted a couple times and tried to disable multipathd. Is multipathd even safe to disable on Node Next? Below are the errors I've received, and thank you again for any tips. [root@node1-g6-h3 ~]# mkfs.ext4 /dev/sdb mke2fs 1.42.9 (28-Dec-2013) /dev/sdb is entire device, not just one partition! Proceed anyway? (y,n) y /dev/sdb is apparently in use by the system; will not make a filesystem here! [root@node1-g6-h3 ~]# gdisk GPT fdisk (gdisk) version 0.8.6 Type device filename, or press <Enter> to exit: /dev/sdb Caution: invalid main GPT header, but valid backup; regenerating main header from backup! Caution! After loading partitions, the CRC doesn't check out! Warning! Main partition table CRC mismatch! Loaded backup partition table instead of main partition table! Warning! One or more CRCs don't match. You should repair the disk! Partition table scan: MBR: not present BSD: not present APM: not present GPT: damaged Found invalid MBR and corrupt GPT. What do you want to do? (Using the GPT MAY permit recovery of GPT data.) 1 - Use current GPT 2 - Create blank GPT Your answer: 2 Command (? for help): n Partition number (1-128, default 1): First sector (34-16952264590, default = 2048) or {+-}size{KMGTP}: Last sector (2048-16952264590, default = 16952264590) or {+-}size{KMGTP}: Current type is 'Linux filesystem' Hex code or GUID (L to show codes, Enter = 8300): 8e00 Changed type of partition to 'Linux LVM' Command (? for help): w Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): y OK; writing new GUID partition table (GPT) to /dev/sdb. The operation has completed successfully. [root@node1-g6-h3 ~]# pvcreate /dev/sdb1 Device /dev/sdb1 not found (or ignored by filtering).

3 2

Virtual networks in oVirt 4.2 and MTU 1500
by Dmitry Semenov 15 Feb '18

15 Feb '18

I have a not big cluster on oVirt 4.2. Each node has a bond, that has several vlans in its turn. I use virtual networks OVN (External Provider -> ovirt-provider-ovn). While testing I have noticed that in virtual network MTU must be less 1500, so my question is may I change something in network or in bond in order everything in virtual network works correctly with MTU 1500? Below link with my settings: https://pastebin.com/F7ssCVFa -- Best regards

2 1

hosted-engine deploy 4.2.1 fails when ovirtmgmt is defined on vlan subinterface
by Kuko Armas 15 Feb '18

15 Feb '18

I'm not sure if I should submit a bug report about this, so I ask around here first... I've found a bug that "seems" related but I think it's not (https://bugzilla.redhat.com/show_bug.cgi?id=1523661) This is the problem: - I'm trying to do a clean HE deploy with oVirt 4.2.1 on a clean CentOS 7.4 host - I have a LACP bond (bond0) and I need my management network to be on vlan 1005, si I have created interface bond0.1005 on the host and everything works - I run hosted-engine deploy, and it always fails with [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.006473", "end": "2018-02-15 13:57:11.132359", "rc": 0, "start": "2018-02-15 13:57:11.125886", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook - Looking at the ansible playbook, I see it's trying to look for an ip rule using a custom routing table, but I have no such rule [root@ovirt1 ~]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default - I also find that I have no "ovirtmgmt" bridge bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no virbr0 8000.525400e6ca97 yes virbr0-nic vnet0 - But I haven't found any reference in the ansible playbook to this network creation. - The HE VM gets created and I can connect with SSH, so I tried to find out if the ovirtmgmt network is created via vdsm from the engine - Looking at the engine.log I found this: 2018-02-15 13:49:26,850Z INFO [org.ovirt.engine.core.bll.host.HostConnectivityChecker] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Engine managed to communicate wi th VDSM agent on host 'ovirt1' with address 'ovirt1' ('06651b32-4ef8-4b5d-ab2d-c38e84c2d790') 2018-02-15 13:49:30,302Z ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] EVENT_ID: VLAN_ID_ MISMATCH_FOR_MANAGEMENT_NETWORK_CONFIGURATION(1,119), Failed to configure management network on host ovirt1. Host ovirt1 has an interface bond0.1005 for the management netwo rk configuration with VLAN-ID (1005), which is different from data-center definition (none). 2018-02-15 13:49:30,302Z ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Exception: org.ovirt.eng ine.core.bll.network.NetworkConfigurator$NetworkConfiguratorException: Failed to configure management network - So I guess that the engine tried to create the ovirtmgmt bridge on the host via vdsm, but it failed because "Host ovirt1 has an interface bond0.1005 for the management netwo rk configuration with VLAN-ID (1005), which is different from data-center definition (none)" - Of course I haven't had the opportunity to setup the management network's vlan in the datacenter yet, because I'm still trying to deploy the Hosted Engine Is this a supported configuration? Is there a way I can tell the datacenter that the management network is on vlan 1005? Should I file a bug report? Is there a workaround? Salu2! -- Miguel Armas CanaryTek Consultoria y Sistemas SL http://www.canarytek.com/

2 2

Sparsify in 4.2 - where it moved ?
by Andrei V 15 Feb '18

15 Feb '18

Hi ! I can’t locate “Sparsify” disk image command anywhere in oVirt 4.2. Where it have been moved ? Thanks Andrei

3 3

hosted-engine 4.2.1-pre setup on a clean node..
by Thomas Davis 15 Feb '18

15 Feb '18

Is this supported? I have a node, that centos 7.4 minimal is installed on, with an interface setup for an IP address. I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run screen, and then do the 'hosted-engine --deploy' command. It hangs on: [ INFO ] changed: [localhost] [ INFO ] TASK [Get ovirtmgmt route table id] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end": "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202120333.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180202115038-r11nh1.log but the VM is up and running, just attached to the 192.168.122.0/24 subnet [root@d8-r13-c2-n1 ~]# ssh root(a)192.168.122.37 root(a)192.168.122.37's password: Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1 [root@ovirt ~]# systemctl status ovirt-engine ● ovirt-engine.service - oVirt Engine Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2018-02-02 11:54:42 PST; 11min ago Main PID: 24724 (ovirt-engine.py) CGroup: /system.slice/ovirt-engine.service ├─24724 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start └─24856 ovirt-engine -server -XX:+TieredCompilation -Xms3971M -Xmx3971M -Djava.awt.headless=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse... Feb 02 11:54:41 ovirt.crt.nersc.gov systemd[1]: Starting oVirt Engine... Feb 02 11:54:41 ovirt.crt.nersc.gov ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine: INFO _detectJBossVersion:187 Detecting JBoss version. Running: /usr/lib/jvm/jre/...600000', '- Feb 02 11:54:42 ovirt.crt.nersc.gov ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine: INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly Full 11.0.0....tderr: '[]' Feb 02 11:54:42 ovirt.crt.nersc.gov systemd[1]: Started oVirt Engine. Feb 02 11:55:25 ovirt.crt.nersc.gov python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:29 ovirt.crt.nersc.gov python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:31 ovirt.crt.nersc.gov python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True The 'ip rule list' never has an ovirtmgmt rule/table in it.. which means the ansible script loops then dies; vdsmd has never configured the network on the node. [root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-02-02 11:55:11 PST; 14min ago Main PID: 7654 (vdsmd) CGroup: /system.slice/vdsmd.service └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running dummybr Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running tune_system Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_space Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_lo Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop Server Manager. Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File: /var/run/vdsm/trackedInterfaces/vnet0 already removed Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet, ignoring event '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0' args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1', 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041', 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0', 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}} Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available. Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats will be missing. Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor of ping2 and confirmConnectivity Do I need to install a complete ovirt-engine on the node first, bring the node into ovirt, then bring up hosted-engine? I'd like to avoid this and just go straight to hosted-engine setup. thomas

3 7

issue on engine deployment on oVirt node
by Vincent Kwiatkowski 15 Feb '18

15 Feb '18

Hi Folks, I tried a few time to configure a simple oVirt engine on oVirt node. After the fresh install of the node, I connect cockpit and launch the engine setup, then at the end I have the message that I need to connect to the VM with "hosted-engine --console" or via VNC. Via VNC, I can't do nothing, have no prompt using the --console, I have the error: :internal error: character device console0 is not using a PTY What can I do to continue the setup? Thx a lot in advance -- Vincent Kwiatkowski | Production System Engineer |ULLINK | D: + 33 1 44 50 25 45 | T: +1 49 95 30 00 | 23/25 rue de Provence | 75009, Paris | vk(a)ullink.com Please consider the environment before printing this email -- *The information contained in or attached to this email is strictly confidential. If you are not the intended recipient, please notify us immediately by telephone and return the message to us.*

1 0

[ANN] oVirt 4.2.2 First Release Candidate is now available
by Lev Veyde 15 Feb '18

15 Feb '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.2 First Release Candidate, as of February 15th, 2018 This update is a release candidate of the second in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node will be available soon [2] Additional Resources: * Read more about the oVirt 4.2.2 release highlights: http://www.ovirt.org/release/4. <http://www.ovirt.org/release/4.2.2/>2 <http://www.ovirt.org/release/4.2.2/>. <http://www.ovirt.org/release/4.2.2/> 2 <http://www.ovirt.org/release/4.2.2/>/ <http://www.ovirt.org/release/4.2.2/> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4. <http://www.ovirt.org/release/4.2.2/>2 <http://www.ovirt.org/release/4.2.2/>. <http://www.ovirt.org/release/4.2.2/> 2 <http://www.ovirt.org/release/4.2.2/>/ <http://www.ovirt.org/release/4.2.2/> [2] http://resources.ovirt.org/pub/ovirt-4. <http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/>2-pre <http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/>/iso/ <http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/> -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: [ovirt-users] Manageiq ovn
by Alona Kaplan 15 Feb '18

15 Feb '18

On Thu, Feb 15, 2018 at 4:03 PM, Aliaksei Nazarenka < aliaksei.nazarenka(a)gmail.com> wrote: > and how i can change network in the created VM? > It is not possible via manageiq. Only via ovirt. > > Sorry for my intrusive questions))) > > 2018-02-15 16:51 GMT+03:00 Aliaksei Nazarenka < > aliaksei.nazarenka(a)gmail.com>: > >> ovirt-provider-ovn-1.2.7-0.20180213232754.gitebd60ad.el7.centos.noarch >> on hosted-engine >> ovirt-provider-ovn-driver-1.2.5-1.el7.centos.noarch on ovirt hosts >> >> 2018-02-15 16:40 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >> >>> >>> >>> On Thu, Feb 15, 2018 at 3:36 PM, Aliaksei Nazarenka < >>> aliaksei.nazarenka(a)gmail.com> wrote: >>> >>>> when i try to create network router, i see this message: *Unable to >>>> create Network Router "test_router": undefined method `[]' for nil:NilClass* >>>> >>> >>> What ovn-provider version you're using? Can you please attach the ovn >>> provider log ( /var/log/ovirt-provider-ovn.log)? >>> >>> >>>> >>>> 2018-02-15 16:20 GMT+03:00 Aliaksei Nazarenka < >>>> aliaksei.nazarenka(a)gmail.com>: >>>> >>>>> Big Thank you! This work! But... Networks are created, but I do not >>>>> see them in the ovirt manager, but through the ovn-nbctl command, I see all >>>>> the networks. And maybe you can tell me how to assign a VM network from >>>>> Manageiq? >>>>> >>>>> 2018-02-15 15:01 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >>>>> >>>>>> >>>>>> >>>>>> On Thu, Feb 15, 2018 at 1:54 PM, Aliaksei Nazarenka < >>>>>> aliaksei.nazarenka(a)gmail.com> wrote: >>>>>> >>>>>>> Error - 1 Minute Ago >>>>>>> undefined method `orchestration_stacks' for >>>>>>> #<ManageIQ::Providers::Redhat::InfraManager:0x00000007bf9288> - I >>>>>>> get this message if I try to create a network of overts and then try to >>>>>>> check the status of the network manager. >>>>>>> >>>>>> >>>>>> It is the same bug. >>>>>> You need to apply the fixes in https://github.com/ManageIQ/ma >>>>>> nageiq-providers-ovirt/pull/198/files to make it work. >>>>>> The best option is to upgrade your version. >>>>>> >>>>>> >>>>>>> 2018-02-15 14:28 GMT+03:00 Aliaksei Nazarenka < >>>>>>> aliaksei.nazarenka(a)gmail.com>: >>>>>>> >>>>>>>> I tried to make changes to the file refresher_ovn_provider.yml - >>>>>>>> changed the passwords, corrected the names of the names, but it was not >>>>>>>> successful. >>>>>>>> >>>>>>>> 2018-02-15 14:26 GMT+03:00 Aliaksei Nazarenka < >>>>>>>> aliaksei.nazarenka(a)gmail.com>: >>>>>>>> >>>>>>>>> Hi! >>>>>>>>> I'm use oVirt 4.2.2 + Manageiq gaprindashvili-1.2018012514301 >>>>>>>>> 9_1450f27 >>>>>>>>> After i set this commits (upstream - https://bugzilla.redhat.com/ >>>>>>>>> 1542063) i no saw changes. >>>>>>>>> >>>>>>>>> >>>>>>>>> 2018-02-15 11:22 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> What version of manageiq you are using? >>>>>>>>>> We had a bug https://bugzilla.redhat.com/1542152 (upstream - >>>>>>>>>> https://bugzilla.redhat.com/1542063) that was fixed in version >>>>>>>>>> 5.9.0.20 >>>>>>>>>> >>>>>>>>>> Please let me know it upgrading the version helped you. >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> Alona. >>>>>>>>>> >>>>>>>>>> On Wed, Feb 14, 2018 at 2:32 PM, Aliaksei Nazarenka < >>>>>>>>>> aliaksei.nazarenka(a)gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Good afternoon! >>>>>>>>>>> I read your article - https://www.ovirt.org/develop/ >>>>>>>>>>> release-management/features/network/manageiq_ovn/. I have only >>>>>>>>>>> one question: how to create a network or subnet in Manageiq + ovirt 4.2.1. >>>>>>>>>>> When I try to create a network, I need to select a tenant, but there is >>>>>>>>>>> nothing that I could choose. How can it be? >>>>>>>>>>> >>>>>>>>>>> Sincerely. Alexey Nazarenko >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >

1 0

Re: [ovirt-users] Manageiq ovn
by Alona Kaplan 15 Feb '18

15 Feb '18

On Thu, Feb 15, 2018 at 3:36 PM, Aliaksei Nazarenka < aliaksei.nazarenka(a)gmail.com> wrote: > when i try to create network router, i see this message: *Unable to > create Network Router "test_router": undefined method `[]' for nil:NilClass* > What ovn-provider version you're using? Can you please attach the ovn provider log ( /var/log/ovirt-provider-ovn.log)? > > 2018-02-15 16:20 GMT+03:00 Aliaksei Nazarenka < > aliaksei.nazarenka(a)gmail.com>: > >> Big Thank you! This work! But... Networks are created, but I do not see >> them in the ovirt manager, but through the ovn-nbctl command, I see all the >> networks. And maybe you can tell me how to assign a VM network from >> Manageiq? >> >> 2018-02-15 15:01 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >> >>> >>> >>> On Thu, Feb 15, 2018 at 1:54 PM, Aliaksei Nazarenka < >>> aliaksei.nazarenka(a)gmail.com> wrote: >>> >>>> Error - 1 Minute Ago >>>> undefined method `orchestration_stacks' for >>>> #<ManageIQ::Providers::Redhat::InfraManager:0x00000007bf9288> - I get >>>> this message if I try to create a network of overts and then try to check >>>> the status of the network manager. >>>> >>> >>> It is the same bug. >>> You need to apply the fixes in https://github.com/ManageIQ/ma >>> nageiq-providers-ovirt/pull/198/files to make it work. >>> The best option is to upgrade your version. >>> >>> >>>> 2018-02-15 14:28 GMT+03:00 Aliaksei Nazarenka < >>>> aliaksei.nazarenka(a)gmail.com>: >>>> >>>>> I tried to make changes to the file refresher_ovn_provider.yml - >>>>> changed the passwords, corrected the names of the names, but it was not >>>>> successful. >>>>> >>>>> 2018-02-15 14:26 GMT+03:00 Aliaksei Nazarenka < >>>>> aliaksei.nazarenka(a)gmail.com>: >>>>> >>>>>> Hi! >>>>>> I'm use oVirt 4.2.2 + Manageiq gaprindashvili-1.2018012514301 >>>>>> 9_1450f27 >>>>>> After i set this commits (upstream - https://bugzilla.redhat.com/ >>>>>> 1542063) i no saw changes. >>>>>> >>>>>> >>>>>> 2018-02-15 11:22 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> What version of manageiq you are using? >>>>>>> We had a bug https://bugzilla.redhat.com/1542152 (upstream - >>>>>>> https://bugzilla.redhat.com/1542063) that was fixed in version >>>>>>> 5.9.0.20 >>>>>>> >>>>>>> Please let me know it upgrading the version helped you. >>>>>>> >>>>>>> Thanks, >>>>>>> Alona. >>>>>>> >>>>>>> On Wed, Feb 14, 2018 at 2:32 PM, Aliaksei Nazarenka < >>>>>>> aliaksei.nazarenka(a)gmail.com> wrote: >>>>>>> >>>>>>>> Good afternoon! >>>>>>>> I read your article - https://www.ovirt.org/develop/ >>>>>>>> release-management/features/network/manageiq_ovn/. I have only one >>>>>>>> question: how to create a network or subnet in Manageiq + ovirt 4.2.1. When >>>>>>>> I try to create a network, I need to select a tenant, but there is nothing >>>>>>>> that I could choose. How can it be? >>>>>>>> >>>>>>>> Sincerely. Alexey Nazarenko >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >

1 0

Re: [ovirt-users] Manageiq ovn
by Alona Kaplan 15 Feb '18

15 Feb '18

Hi Alexey, Please reply to the users list so all the user may enjoy the information. Automatic sync of ovn networks to ovirt was added on version ovirt-engine-4.2.1.3 (https://bugzilla.redhat.com/1511823) If you use lower version you should import the network to ovirt manually (networks tab -> import button). Once the ovn network is imported to ovirt a vnic profile is automatically created to it. In manageiq, you can assign this profile to a vm you provision (provision vm -> network tab -> vlan field). Alona. On Thu, Feb 15, 2018 at 3:20 PM, Aliaksei Nazarenka < aliaksei.nazarenka(a)gmail.com> wrote: > Big Thank you! This work! But... Networks are created, but I do not see > them in the ovirt manager, but through the ovn-nbctl command, I see all the > networks. And maybe you can tell me how to assign a VM network from > Manageiq? > > 2018-02-15 15:01 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: > >> >> >> On Thu, Feb 15, 2018 at 1:54 PM, Aliaksei Nazarenka < >> aliaksei.nazarenka(a)gmail.com> wrote: >> >>> Error - 1 Minute Ago >>> undefined method `orchestration_stacks' for >>> #<ManageIQ::Providers::Redhat::InfraManager:0x00000007bf9288> - I get >>> this message if I try to create a network of overts and then try to check >>> the status of the network manager. >>> >> >> It is the same bug. >> You need to apply the fixes in https://github.com/ManageIQ/ma >> nageiq-providers-ovirt/pull/198/files to make it work. >> The best option is to upgrade your version. >> >> >>> 2018-02-15 14:28 GMT+03:00 Aliaksei Nazarenka < >>> aliaksei.nazarenka(a)gmail.com>: >>> >>>> I tried to make changes to the file refresher_ovn_provider.yml - >>>> changed the passwords, corrected the names of the names, but it was not >>>> successful. >>>> >>>> 2018-02-15 14:26 GMT+03:00 Aliaksei Nazarenka < >>>> aliaksei.nazarenka(a)gmail.com>: >>>> >>>>> Hi! >>>>> I'm use oVirt 4.2.2 + Manageiq gaprindashvili-1.2018012514301 >>>>> 9_1450f27 >>>>> After i set this commits (upstream - https://bugzilla.redhat.com/ >>>>> 1542063) i no saw changes. >>>>> >>>>> >>>>> 2018-02-15 11:22 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >>>>> >>>>>> Hi, >>>>>> >>>>>> What version of manageiq you are using? >>>>>> We had a bug https://bugzilla.redhat.com/1542152 (upstream - >>>>>> https://bugzilla.redhat.com/1542063) that was fixed in version >>>>>> 5.9.0.20 >>>>>> >>>>>> Please let me know it upgrading the version helped you. >>>>>> >>>>>> Thanks, >>>>>> Alona. >>>>>> >>>>>> On Wed, Feb 14, 2018 at 2:32 PM, Aliaksei Nazarenka < >>>>>> aliaksei.nazarenka(a)gmail.com> wrote: >>>>>> >>>>>>> Good afternoon! >>>>>>> I read your article - https://www.ovirt.org/develop/ >>>>>>> release-management/features/network/manageiq_ovn/. I have only one >>>>>>> question: how to create a network or subnet in Manageiq + ovirt 4.2.1. When >>>>>>> I try to create a network, I need to select a tenant, but there is nothing >>>>>>> that I could choose. How can it be? >>>>>>> >>>>>>> Sincerely. Alexey Nazarenko >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >

1 0

Re: [ovirt-users] Manageiq ovn
by Alona Kaplan 15 Feb '18

15 Feb '18

On Thu, Feb 15, 2018 at 1:54 PM, Aliaksei Nazarenka < aliaksei.nazarenka(a)gmail.com> wrote: > Error - 1 Minute Ago > undefined method `orchestration_stacks' for #<ManageIQ::Providers::Redhat: > :InfraManager:0x00000007bf9288> - I get this message if I try to create a > network of overts and then try to check the status of the network manager. > It is the same bug. You need to apply the fixes in https://github.com/ManageIQ/manageiq-providers-ovirt/pull/198/files to make it work. The best option is to upgrade your version. > 2018-02-15 14:28 GMT+03:00 Aliaksei Nazarenka < > aliaksei.nazarenka(a)gmail.com>: > >> I tried to make changes to the file refresher_ovn_provider.yml - changed >> the passwords, corrected the names of the names, but it was not successful. >> >> 2018-02-15 14:26 GMT+03:00 Aliaksei Nazarenka < >> aliaksei.nazarenka(a)gmail.com>: >> >>> Hi! >>> I'm use oVirt 4.2.2 + Manageiq gaprindashvili-1.20180125143019_1450f27 >>> After i set this commits (upstream - https://bugzilla.redhat.com/ >>> 1542063) i no saw changes. >>> >>> >>> 2018-02-15 11:22 GMT+03:00 Alona Kaplan <alkaplan(a)redhat.com>: >>> >>>> Hi, >>>> >>>> What version of manageiq you are using? >>>> We had a bug https://bugzilla.redhat.com/1542152 (upstream - >>>> https://bugzilla.redhat.com/1542063) that was fixed in version 5.9.0.20 >>>> >>>> Please let me know it upgrading the version helped you. >>>> >>>> Thanks, >>>> Alona. >>>> >>>> On Wed, Feb 14, 2018 at 2:32 PM, Aliaksei Nazarenka < >>>> aliaksei.nazarenka(a)gmail.com> wrote: >>>> >>>>> Good afternoon! >>>>> I read your article - https://www.ovirt.org/develop/ >>>>> release-management/features/network/manageiq_ovn/. I have only one >>>>> question: how to create a network or subnet in Manageiq + ovirt 4.2.1. When >>>>> I try to create a network, I need to select a tenant, but there is nothing >>>>> that I could choose. How can it be? >>>>> >>>>> Sincerely. Alexey Nazarenko >>>>> >>>> >>>> >>> >> >

1 0

hosted engine install fails on useless DHCP lookup
by Jamie Lawrence 15 Feb '18

15 Feb '18

Hello, I'm seeing the hosted engine install fail on an Ansible playbook step. Log below. I tried looking at the file specified for retry, below (/usr/share/ovirt-hosted-engine-setup/ansible/bootstrap_local_vm.retry); it contains the word, 'localhost'. The log below didn't contain anything I could see that was actionable; given that it was an ansible error, I hunted down the config and enabled logging. On this run the error was different - the installer log was the same, but the reported error (from the installer changed). The first time, the installer said: [ INFO ] TASK [Wait for the host to become non operational] [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 150, "changed": false} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up Second: [ INFO ] TASK [Get local vm ip] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:11:e7:bd | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.093840", "end": "2018-02-13 16:53:08.658556", "rc": 0, "start": "2018-02-13 16:53:08.564716", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up Ansible log below; as with that second snippet, it appears that it was trying to parse out a host name from virsh's list of DHCP leases, couldn't, and died. Which makes sense: I gave it a static IP, and unless I'm missing something, setup should not have been doing that. I verified that the answer file has the IP: OVEHOSTED_VM/cloudinitVMStaticCIDR=str:10.181.26.150/24 Anyone see what is wrong here? -j hosted-engine --deploy log: 2018-02-13 16:20:32,138-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Force host-deploy in offline mode] 2018-02-13 16:20:33,041-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 changed: [localhost] 2018-02-13 16:20:33,342-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [include_tasks] 2018-02-13 16:20:33,443-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 ok: [localhost] 2018-02-13 16:20:33,744-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Obtain SSO token using username/password credentials] 2018-02-13 16:20:35,248-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 ok: [localhost] 2018-02-13 16:20:35,550-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Add host] 2018-02-13 16:20:37,053-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 changed: [localhost] 2018-02-13 16:20:37,355-0800 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:100 TASK [Wait for the host to become non operational] 2018-02-13 16:27:48,895-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 {u'_ansible_parsed': True, u'_ansible_no_log': False, u'changed': False, u'attempts': 150, u'invocation': {u'module_args': {u'pattern': u'name=ovirt-1.squaretrade.com', u'fetch_nested': False, u'nested_attributes': []}}, u'ansible_facts': {u'ovirt_hosts': []}} 2018-02-13 16:27:48,995-0800 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:98 fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 150, "changed": false} 2018-02-13 16:27:49,297-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 PLAY RECAP [localhost] : ok: 42 changed: 17 unreachable: 0 skipped: 2 failed: 1 2018-02-13 16:27:49,397-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 PLAY RECAP [ovirt-engine-1.squaretrade.com] : ok: 15 changed: 8 unreachable: 0 skipped: 4 failed: 0 2018-02-13 16:27:49,498-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:180 ansible-playbook rc: 2 2018-02-13 16:27:49,498-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:187 ansible-playbook stdout: 2018-02-13 16:27:49,499-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:189 to retry, use: --limit @/usr/share/ovirt-hosted-engine-setup/ansible/bootstrap_local_vm.retry 2018-02-13 16:27:49,499-0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:190 ansible-playbook stderr: 2018-02-13 16:27:49,500-0800 DEBUG otopi.context context._executeMethod:143 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 133, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-ansiblesetup/core/misc.py", line 186, in _closeup r = ah.run() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/ansible_utils.py", line 194, in run raise RuntimeError(_('Failed executing ansible-playbook')) RuntimeError: Failed executing ansible-playbook 2018-02-13 16:27:49,512-0800 ERROR otopi.context context._executeMethod:152 Failed to execute stage 'Closing up': Failed executing ansible-playbook 2018-02-13 16:27:49,513-0800 DEBUG otopi.context context.dumpEnvironment:859 ENVIRONMENT DUMP - BEGIN - - - - - - ansible log snip: 2018-02-13 16:52:47,548 ovirt-hosted-engine-setup-ansible ansible on_any args (<ansible.executor.task_result.TaskResult object at 0x7f00dc19f850>,) kwargs {} 2018-02-13 16:52:58,124 ovirt-hosted-engine-setup-ansible ansible on_any args (<ansible.executor.task_result.TaskResult object at 0x2a09310>,) kwargs {} 2018-02-13 16:53:08,954 ovirt-hosted-engine-setup-ansible var changed: host "localhost" var "local_vm_ip" type "<type 'dict'>" value: "{'stderr_lines': [], u'changed': True, u'end': u'2018-02-13 16:53:08.658556', u'stdout': u'', u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:11:e7:bd | awk '{ print $5 }' | cut -f1 -d'/'", u'rc': 0, u'start': u'2018-02-13 16:53:08.564716', 'attempts': 50, u'stderr': u'', u'delta': u'0:00:00.093840', 'stdout_lines': [], 'failed': True}"

2 3

Moving Combined Engine & Node to new network.
by Rulas Mur 15 Feb '18

15 Feb '18

Hi, I setup the host+engine on centos 7 on my home network and everything worked perfectly, However when I connected it to my work network networking failed completely. hostname -I would be blank. lspci does list the hardware nmcli d is empty nmcli con show is empty nmcli device status is empty there is a device in /sys/class/net/ Is there a way to fix this? or do I have to reinstall? On another note, ovirt is amazing! Thanks for the quality product, Rulasmur

1 0

Q: Upgrade 4.2 -> 4.2.1 Dependency Problem
by Andrei V 14 Feb '18

14 Feb '18

Hi ! I run into unexpected problem upgrading oVirt node (installed manually on CentOS): This problem have to be fixed manually otherwise upgrade command from host engine also fail. -> glusterfs-rdma = 3.12.5-2.el7 was installed manually as a dependency resolution for ovirt-host-4.2.1-1.el7.centos.x86_64 Q: How to get around this problem? Thanks in advance. Error: Package: ovirt-host-4.2.1-1.el7.centos.x86_64 (ovirt-4.2) Requires: glusterfs-rdma Removing: glusterfs-rdma-3.12.5-2.el7.x86_64 (@ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.5-2.el7 Obsoleted By: mlnx-ofa_kernel-3.4-OFED.3.4.2.1.5.1.ged26eb5.1.rhel7u3.x86_64 (HP-spp) Not found Available: glusterfs-rdma-3.8.4-18.4.el7.centos.x86_64 (base) glusterfs-rdma = 3.8.4-18.4.el7.centos Available: glusterfs-rdma-3.12.0-1.el7.x86_64 (ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.0-1.el7 Available: glusterfs-rdma-3.12.1-1.el7.x86_64 (ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.1-1.el7 Available: glusterfs-rdma-3.12.1-2.el7.x86_64 (ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.1-2.el7 Available: glusterfs-rdma-3.12.3-1.el7.x86_64 (ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.3-1.el7 Available: glusterfs-rdma-3.12.4-1.el7.x86_64 (ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.4-1.el7

3 2

Ovirt 3.6 to 4.2 upgrade
by Gary Lloyd 14 Feb '18

14 Feb '18

Hi Is it possible/supported to upgrade from Ovirt 3.6 straight to Ovirt 4.2 ? Does live migration still function between the older vdsm nodes and vdsm nodes with software built against Ovirt 4.2 ? We changed a couple of the vdsm python files to enable iscsi multipath on direct luns. (It's a fairly simple change to a couple of the python files). We've been running it this way since 2012 (Ovirt 3.2). Many Thanks *Gary Lloyd* ________________________________________________ I.T. Systems:Keele University Finance & IT Directorate Keele:Staffs:IC1 Building:ST5 5NB:UK +44 1782 733063 <%2B44%201782%20733073> ________________________________________________

3 3

ovirt 4.1 unable deploy HostedEngine on next host Configuration value not found: file=/etc/.../hosted-engine.conf
by Reznikov Alexei 14 Feb '18

14 Feb '18

Hi all! After upgrade from ovirt 4.0 to 4.1, a have trouble add to next HostedEngine host to my cluster via webui... host add succesfully and become up, but HE not active in this host. log's from trouble host # cat agent.log > KeyError: 'Configuration value not found: file=/etc/ovirt-hosted-engine/hosted-engine.conf, key=gateway' # cat /etc/ovirt-hosted-engine/hosted-engine.conf ca_cert=/etc/pki/vdsm/libvirt-spice/ca-cert.pem host_id=2 log deploy from engine in attach. trouble host: ovirt-hosted-engine-setup-2.1.4-1.el7.centos.noarch ovirt-host-deploy-1.6.7-1.el7.centos.noarch vdsm-4.19.45-1.el7.centos.x86_64 CentOS Linux release 7.4.1708 (Core) engine host: ovirt-release41-4.1.9-1.el7.centos.noarch ovirt-engine-4.1.9.1-1.el7.centos.noarch CentOS Linux release 7.4.1708 (Core) Please help me fix it. Thanx, Alex.

6 9