- Users - oVirt List Archives

cpu, core and thread mappings
by Gianluca Cecchi 06 Sep '17

06 Sep '17

Hello, I was talking with a guy expert in VMware and discussing performance of VMs in respect of virtual cpus assigned to them in relation with mapping with the real hw of the hypervisor underneath. One of the topics was numa usage and its overheads in case of a "too" big VM, in terms of both number of vcpus and memory amount. Eg: suppose host has 2 intel based sockets, with 6 cores and HT enabled and has 96Gb of ram (distributed 48+48 between the 2 processors) suppose I configure a VM with 16 vcpus (2:4:2): would be the mapping respected at physical level or only a sort of "hint" for the hypervisor? Can I say that it would perform better if I configure it 12 vcpus and mapping 1:6:2, because it can stay all inside one cpu? And what if I define a VM with 52Gb of ram? Can I say that it would perform in general better if I try to get it all in one cpu related memory slots (eg not more than 48Gb in my example)? Are there any documents going more deeply in these sort of considerations? Also, if one goes and sizes so that the biggest VM is able to all-stay inside one cpu-memory, does it make sense to say that it will perform better in this scenario a cluster composed by 4 nodes, each one with 1 socket and 48Gb of memory instead of a cluster of 2 nodes, each one with 2 sockets and 96Gb of ram? Hope I have clarified my questions/doubts. Thanks in advance for any insight, Gianluca

3 2

Re: [ovirt-users] Failed to import the Hosted Engine Storage Domain
by Simone Tiraboschi 06 Sep '17

06 Sep '17

On Mon, Sep 4, 2017 at 2:21 PM, Arsène Gschwind <arsene.gschwind(a)unibas.ch> wrote: > > > On 09/04/2017 02:01 PM, Simone Tiraboschi wrote: > > > > On Mon, Sep 4, 2017 at 1:55 PM, Arsène Gschwind <arsene.gschwind(a)unibas.ch > > wrote: > >> >> >> On 09/04/2017 01:52 PM, Simone Tiraboschi wrote: >> >> >> >> On Mon, Sep 4, 2017 at 12:23 PM, Arsène Gschwind < >> arsene.gschwind(a)unibas.ch> wrote: >> >>> Hi Simone, >>> >>> On 09/04/2017 11:14 AM, Simone Tiraboschi wrote: >>> >>> >>> >>> On Mon, Sep 4, 2017 at 10:56 AM, Arsène Gschwind < >>> arsene.gschwind(a)unibas.ch> wrote: >>> >>>> Hi Didi, >>>> >>>> On 09/04/2017 10:15 AM, Yedidyah Bar David wrote: >>>> >>>> On Mon, Sep 4, 2017 at 10:16 AM, Arsène Gschwind<arsene.gschwind(a)unibas.ch> <arsene.gschwind(a)unibas.ch> wrote: >>>> >>>> Hi all, >>>> >>>> A while ago I had some problem with hosted-engine network which wasn't set >>>> correctly at deploy time, so I finally decided to redeploy the hosted engine >>>> in the hope the network will be set correctly this time. I've followed this >>>> procedure: >>>> >>>> Stop all VMs >>>> Full backup of HE DB and export to safe place >>>> Cleanup HE storage following https://access.redhat.com/solutions/2121581 >>>> Reboot Hosts >>>> Re-deploy HE until DB recovery >>>> Recover DB adding the following param: >>>> --he-remove-storage-vm Removes the hosted-engine storage >>>> domain, all its entities and the hosted-engine VM during restore. >>>> --he-remove-hosts Removes all the hosted-engine hosts >>>> during restore. >>>> >>>> Finalize HE deployment. >>>> >>>> Everything did run without errors and I'm able to access Web UI. >>>> >>>> But now I don't see my HE VM and its respective Storage Domain, the logs >>>> says it isn't able to import it. I see all other SD and I'm able to manage >>>> my VMs as before. >>>> >>>> Please find attached engine.log >>>> >>>> I think this is your problem: >>>> >>>> 2017-09-04 03:26:14,272+02 INFO >>>> [org.ovirt.engine.core.bll.storage.domain.AddExistingBlockStorageDomainCommand] >>>> (org.ovirt.thread.pool-6-thread-24) [2383eaa0] There are existing luns >>>> in the system which are part of VG id >>>> 'vvIoS2-fZTZ-99Ox-Ltzq-pr8U-SL2z-wbTU8g' >>>> >>>> I don't see a VG with this ID, here the IDs I see on the hosts: >>>> >>>> VG #PV #LV #SN Attr VSize VFree >>>> 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 1 10 0 wz--n- 99.62g 14.50g >>>> b0414c06-d984-4001-a998-fd9a2e79fb83 2 70 0 wz--n- 10.00t 2.31t >>>> b2e30961-7cff-4cca-83d6-bee3a4f890ee 2 47 0 wz--n- 5.27t 2.50t >>>> >>> >>> >>> Could you please repeat the command on host adm-kvmh70 ? >>> >>> 2017-09-04 09:04:18,163+02 INFO [org.ovirt.engine.core.bll.st >>> orage.domain.ImportHostedEngineStorageDomainCommand] >>> (org.ovirt.thread.pool-6-thread-34) [247a3718] Running command: >>> ImportHostedEngineStorageDomainCommand internal: true. >>> 2017-09-04 09:04:18,189+02 INFO [org.ovirt.engine.core.vdsbro >>> ker.vdsbroker.GetVGInfoVDSCommand] (org.ovirt.thread.pool-6-thread-34) >>> [7d2e6cb2] START, GetVGInfoVDSCommand(HostName = adm-kvmh70, >>> GetVGInfoVDSCommandParameters:{runAsync='true', >>> hostId='acbacabb-6c4a-43fd-a1e2-2d7ff2f6f98b', >>> VGID='vvIoS2-fZTZ-99Ox-Ltzq-pr8U-SL2z-wbTU8g'}), log id: 6693b98a >>> 2017-09-04 09:04:18,232+02 INFO [org.ovirt.engine.core.vdsbro >>> ker.vdsbroker.GetVGInfoVDSCommand] (org.ovirt.thread.pool-6-thread-34) >>> [7d2e6cb2] FINISH, GetVGInfoVDSCommand, return: >>> [LUNs:{id='repl_HostedEngine', physicalVolumeId='kYN8Jj-FBDw-MhxI-XcoZ-w1zH-eQL8-IRIgzO', >>> volumeGroupId='vvIoS2-fZTZ-99Ox-Ltzq-pr8U-SL2z-wbTU8g', >>> serial='SHITACHI_OPEN-V_50488888', lunMapping='4', vendorId='HITACHI', >>> productId='OPEN-V', lunConnections='[]', deviceSize='100', pvSize='0', >>> peCount='797', peAllocatedCount='681', vendorName='HITACHI', >>> pathsDictionary='[sdf=true, sdu=true, sdk=true, sdp=true]', >>> pathsCapacity='[sdf=100, sdu=100, sdk=100, sdp=100]', lunType='FCP', >>> status='null', diskId='null', diskAlias='null', >>> storageDomainId='6b62cc06-fc44-4c38-af6d-bfd9cbe73246', >>> storageDomainName='null', discardMaxSize='268435456', >>> discardZeroesData='true'}], log id: 6693b98a >>> 2017-09-04 09:04:18,245+02 INFO [org.ovirt.engine.core.bll.st >>> orage.domain.AddExistingBlockStorageDomainCommand] >>> (org.ovirt.thread.pool-6-thread-34) [7d2e6cb2] There are existing luns >>> in the system which are part of VG id 'vvIoS2-fZTZ-99Ox-Ltzq-pr8U-SL >>> 2z-wbTU8g' >>> 2017-09-04 09:04:18,245+02 WARN [org.ovirt.engine.core.bll.st >>> orage.domain.AddExistingBlockStorageDomainCommand] >>> (org.ovirt.thread.pool-6-thread-34) [7d2e6cb2] Validation of action >>> 'AddExistingBlockStorageDomain' failed for user SYSTEM. Reasons: >>> VAR__TYPE__STORAGE__DOMAIN,VAR__ACTION__ADD,ACTION_TYPE_FAIL >>> ED_IMPORT_STORAGE_DOMAIN_EXTERNAL_LUN_DISK_EXIST >>> >>> I don't know which command you are talking about, I didn't run any >>> command since it tries to import the SD automatically. >>> >> >> Sorry, can you please run vgdisplay on adm-kvmh70 ? >> >> No problem! here the result: >> >> [root@adm-kvmh70 ~]# vgs >> VG #PV #LV #SN Attr VSize VFree >> 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 1 10 0 wz--n- 99.62g 14.50g >> b0414c06-d984-4001-a998-fd9a2e79fb83 2 70 0 wz--n- 10.00t 2.31t >> b2e30961-7cff-4cca-83d6-bee3a4f890ee 2 47 0 wz--n- 5.27t 2.50t >> vg_adm-kvmh70 1 3 0 wz--n- 277.90g 218.68g >> >> > OK, and > vgdisplay 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 > > [root@adm-kvmh70 ~]# vgdisplay 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 > --- Volume group --- > VG Name 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 > System ID > Format lvm2 > Metadata Areas 2 > Metadata Sequence No 23 > VG Access read/write > VG Status resizable > MAX LV 0 > Cur LV 10 > Open LV 3 > Max PV 0 > Cur PV 1 > Act PV 1 > VG Size 99.62 GiB > PE Size 128.00 MiB > Total PE 797 > Alloc PE / Size 681 / 85.12 GiB > Free PE / Size 116 / 14.50 GiB > VG UUID vvIoS2-fZTZ-99Ox-Ltzq-pr8U-SL2z-wbTU8g > OK, vvIoS2-fZTZ-99Ox-Ltzq-pr8U-SL2z-wbTU8g is the uuid of the VG that engine says that it includes the LUN used by the hosted-engine SD as detected by the engine. Its name is 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 which is also the uuid of that storage domain. Now we need to understand what's there. Could you please check if an SD with uuid 6b62cc06-fc44-4c38-af6d-bfd9cbe73246 is visible in the engine? Is adm-kvmh70 involved in hosted-engine? did you redeployed it? In the past did you tried to manually import the hosted-engine SD or something similar? thanks > > Thanks > > ? > > >> >> >> >>> >>> Thanks, >>> Arsene >>> >>> >>> >>>> >>>> >>>> Thanks for any help to resolve that issue. >>>> >>>> I guess you can try to remove this disk/lun from the engine and let it retry. >>>> >>>> Could let me know how to remove that lun from the engine? >>>> >>>> If the only disk is of the hosted-engine, I guess it should have been >>>> removed by '--he-remove-storage-vm' - if so, please open a bug >>>> describing your flow in detail. Thanks. >>>> >>>> It seems that this option didn't remove the he storage information and >>>> that this VG is still the old one. >>>> >>>> Many thanks for your help >>>> Rgds, >>>> Arsene >>>> >>>> Best, >>>> >>>> >>>> Arsène >>>> >>>> -- >>>> >>>> Arsène Gschwind >>>> Fa. Sapify AG im Auftrag der Universität Basel >>>> IT Services >>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>> Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch >>>> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011> >>>> >>>> >>>> _______________________________________________ >>>> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> -- >>>> >>>> *Arsène Gschwind* >>>> Fa. Sapify AG im Auftrag der Universität Basel >>>> IT Services >>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>>> Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch >>>> >>>> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11 >>>> <+41%2061%20267%2014%2011> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >>> -- >>> >>> *Arsène Gschwind* >>> Fa. Sapify AG im Auftrag der Universität Basel >>> IT Services >>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >>> Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch >>> >>> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11 >>> <+41%2061%20267%2014%2011> >>> >> >> >> -- >> >> *Arsène Gschwind* >> Fa. Sapify AG im Auftrag der Universität Basel >> IT Services >> Klingelbergstr. 70 | CH-4056 Basel | Switzerland >> Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch >> >> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11 >> <+41%2061%20267%2014%2011> >> > > > -- > > *Arsène Gschwind* > Fa. Sapify AG im Auftrag der Universität Basel > IT Services > Klingelbergstr. 70 | CH-4056 Basel | Switzerland > Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch > ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11 > <+41%2061%20267%2014%2011> >

2 7

Slow booting host - restart loop
by Bernardo Juanicó 06 Sep '17

06 Sep '17

Hi everyone, I installed 2 hosts on a new cluster and the servers take a really long to boot up (about 8 minutes). When a host crashes or is powered off the ovirt-manager starts it via power management, since the servers takes all that time to boot up the ovirt-manager thinks it failed to start and proceeds to reboot it, several times before giving up, when the server is finally started (about 20 minutes after the failure) I changed some engine variables with engine-config trying to set a higher timeout, but the problem persists. Any ideas?? Regards, Bernardo PGP Key <http://pgp.mit.edu/pks/lookup?op=get&search=0x695E5BCE34263F5B> Skype: mattraken

4 8

VMs going in to non-responding state
by Satheesaran Sundaramoorthi 06 Sep '17

06 Sep '17

Hi All, I have created a converged setup with cluster having both virt and gluster capability. There are three hosts in this cluster, and this cluster also has enabled 'native access to gluster domain' which enables VM to use libgfapi access mechanism. With this setup, I see VMs created landing up in non-reponding state after sometime. I have raised bug[1] for this issue. Request for help with this issue [1] - https://bugzilla.redhat.com/show_bug.cgi?id=1488863 Advance Thanks. -- Satheesaran S ( sas )

1 0

Changes in Virt SIG in upcoming CentOS 1708
by Sandro Bonazzola 06 Sep '17

06 Sep '17

Hi, with upcoming CentOS 1708 all the SIGs have been asked to do some cleanup of old / unsupported stuff. As part of the cleanup, ovirt 3.5, 3.6 and 4.0 will be dropped from http://mirror.centos.org/centos/7/virt/x86_64/ Also, as part of the cleanup a few packages previously tagged in CentOS VIrt SIG repos and now available in CentOS base / optional / extras repo have been untagged and won't be in http://mirror.centos.org/centos/7/virt/x86_64/ when the repo will be re-generated from tags. As a side effect, you may see cockpit related packages not available if you're running oVirt on RHEL 7.4 instead of CentOS 7.1708 because on CentOS 7 extras channel is enabled by default while on RHEL you need to enable it manually. Thanks, -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

[QA] fluentd-0.12.39-1.el7
by Sandro Bonazzola 06 Sep '17

06 Sep '17

Hi, CentOS OpsTools SIG tagged fluentd-0.12.39-1.el7 <http://cbs.centos.org/koji/buildinfo?buildID=19053> and rubygem-cool.io-1.5.1-1.el7 <http://cbs.centos.org/koji/buildinfo?buildID=19649> for testing and will probably move soon to release repo. Before it happens, if you're already using it can you please provide feedback on its goodness on oVirt environment? I don't see critical changes from 0.12.37 but some feedback would help. Testing yum repository is https://buildlogs.centos.org/centos/7/opstools/x86_64/ and is already used in our CI without any breakage reported so far. Thanks to whoever volunteer for this testing. -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: [ovirt-users] Cannot delete the snapshot
by Benny Zlotnik 05 Sep '17

05 Sep '17

Accidentally replied without cc-ing the list On Sun, Sep 3, 2017 at 12:21 PM, Benny Zlotnik <bzlotnik(a)redhat.com> wrote: > Hi, > > Could you provide full engine and vdsm logs? > > On Sat, Sep 2, 2017 at 4:23 PM, wai chun hung <waichunterry(a)gmail.com> > wrote: > >> Dear all, >> This is my first time to ask question in this place. Thank you for time >> to read my question first. >> >> Yesterday, i wanted to delete the snapshot on oVirt Engine Web >> Administration. However, it took so long to delete a snapshot and it still >> in process. >> >> Due to the "snapshot error", i cannot run the virtual machine as i shut >> it down before. >> >> Is there anyone has some idea how to fix it? >> The following information maybe useful for debugging . >> >> On web administration: >> Removing Snapshot <the snapshot name> Sep 1, 2017 6:06:58 PM N/A <the >> snapshot id> >> <green tick>Validating Sep 1, 2017 6:06:58 PM until Sep 1, 2017 6:06:58 >> PM >> <In process> Executing Sep 1, 2017 6:06:58 PM N/A >> >> On Engine log. >> 2017-09-02 20:57:10,700+08 INFO [org.ovirt.engine.core.bll.Co >> ncurrentChildCommandsExecutionCallback] (DefaultQuartzScheduler6) >> [70471886-a5cb-404c-80db-b8469092aa8e] Command 'RemoveSnapshot' (id: >> '78ee1e62-26ea-403d-b518-9e3d3be995c2') waiting on child command id: >> '5f2e8197-704f-453c-bea8-74186e5ca95c' type:'RemoveSnapshotSingleDiskLive' >> to complete >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >

1 0

disk attachment to VM
by Erekle Magradze 05 Sep '17

05 Sep '17

Hey Guys, Is there a way to attach an SSD directly to the oVirt VM? Thanks in advance Cheers Erekle

1 0

samba gluster vfs & symlinks/submounts... ?
by lejeczek 05 Sep '17

05 Sep '17

.. or just a way to make samba, when samba shares via glusterfs api, to show in a share/vol a submount(like fs bind) - how, if possible at all? many thanks, L.

1 0

Someone can give me advice about Ovirt?
by Khoi Thinh 05 Sep '17

05 Sep '17

Hi everyone, Here's my use case of using Ovirt I want to store only virtual machine of "Hosted engine" to Shared Disk, in addition i also want to store other virtual machine to "Local disk" For "Hosted engine", i want to built it with High Availability. There's no need for High Availability for other virtual machine. Because i want to use HDD's capacity of Host server, so i'm considering the above-mention structure/design. What do you think about this? Any advice/thoughts would be appreciate. -- *Khoi Thinh*

2 1

Ovirt-engine - 404 not Found
by Thomas Fecke 05 Sep '17

05 Sep '17

Hey Guys, i worked with an ovirt envirnoment the last Weeks. Everythink worked fine until i reboot the Manager. When i access the GUI i recive - 404-not Found When i restart the engine it seems to stop at 2017-09-05 13:43:33,491+02 INFO [org.ovirt.engine.core.bll.ServiceLoader] (ServerService Thread Pool -- 58) [] Start org.ovirt.engine.core.bll.EngineBackupAwarenessManager@6c8b0514 attached u can find the logs Thanks a lot - The Cluster is very important. i got a backup but need to know why it stopped

2 1

Storage slowly expanding
by Jim Kusznir 05 Sep '17

05 Sep '17

Hi all: I have several VMs, all thin provisioned, on my small storage (self-hosted gluster / hyperconverged cluster). I'm now noticing that some of my VMs (espicially my only Windows VM) are using even MORE disk space than the blank it was allocated. Example: windows VM: virtual size created at creation: 30GB (thin provisioned). Actual disk space in use: 19GB. According to the storage -> Disks tab, its currently using 39GB. How do I get that down? I have two other VMs that are somewhat heavy DB load (Zabbix and Unifi); both of those are also larger than their created max size despite disk in machine not being fully utilized. None of these have snapshots. How do I fix this? Thanks! --Jim

2 3

Configure Wifi Interface with oVirt Host
by Sec For 05 Sep '17

05 Sep '17

Hello, My engine was configured with enp3s0

2 2

Failed to import the Hosted Engine Storage Domain
by Arsène Gschwind 04 Sep '17

04 Sep '17

Hi all, A while ago I had some problem with hosted-engine network which wasn't set correctly at deploy time, so I finally decided to redeploy the hosted engine in the hope the network will be set correctly this time. I've followed this procedure: 1. Stop all VMs 2. Full backup of HE DB and export to safe place 3. Cleanup HE storage following https://access.redhat.com/solutions/2121581 4. Reboot Hosts 5. Re-deploy HE until DB recovery 6. Recover DB adding the following param: --he-remove-storage-vm Removes the hosted-engine storage domain, all its entities and the hosted-engine VM during restore. --he-remove-hosts Removes all the hosted-engine hosts during restore. 7. Finalize HE deployment. Everything did run without errors and I'm able to access Web UI. But now I don't see my HE VM and its respective Storage Domain, the logs says it isn't able to import it. I see all other SD and I'm able to manage my VMs as before. Please find attached engine.log Thanks for any help to resolve that issue. Arsène -- *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11

3 6

First oVirt engine deploy: missing gateway on hosts
by Mauro Tridici 04 Sep '17

04 Sep '17

--Apple-Mail=_7A672012-6D66-434F-8F68-C3419D9A8159 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=utf-8 Hi all, I just started my first Ovirt Engine deploy using a dedicated (and = separated) virtual machine. I=E2=80=99m trying to create and manage a test Gluster cluster using 3 = =E2=80=9Cvirtual=E2=80=9D hosts (hostnames are glu01, glu02, glu03) 2 different networks have been defined on the hosts (192.168.213.0/24 = for management network and 192.168.152.0/24 for gluster network). Ovirt engine deploy completed without any problem, the hosts have been = added easily using ovirtmgmt network (bridgeless mgmt network) and = ovirtgluster (bridgeless gluster network). Everything seems to be ok for this first deploy, but I just noticed that = the gateway is missing on the target hosts: [root@glu01 ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use = Iface link-local 0.0.0.0 255.255.0.0 U 1002 0 0 = ens33 link-local 0.0.0.0 255.255.0.0 U 1003 0 0 = ens34 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 = ens34 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 = ens33 [root@glu02 ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use = Iface link-local 0.0.0.0 255.255.0.0 U 1002 0 0 = ens33 link-local 0.0.0.0 255.255.0.0 U 1003 0 0 = ens34 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 = ens34 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 = ens33 [root@glu03 ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use = Iface link-local 0.0.0.0 255.255.0.0 U 1002 0 0 = ens33 link-local 0.0.0.0 255.255.0.0 U 1003 0 0 = ens34 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 = ens34 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 = ens33 Due to this problem I cannot reach internet from ens33 nic (management = network). I just tried to add the gateway in ifcfg-ens33 configuration file but = gateway disappear after host reboot.=20 [root@glu01 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens33 # Generated by VDSM version 4.19.28-1.el7.centos DEVICE=3Dens33 ONBOOT=3Dyes IPADDR=3D192.168.213.151 NETMASK=3D255.255.255.0 BOOTPROTO=3Dnone MTU=3D1500 DEFROUTE=3Dno NM_CONTROLLED=3Dno IPV6INIT=3Dyes IPV6_AUTOCONF=3Dyes The oVirt Engine network configuration is the following one: [host glu01] ens33 -> ovirtmgmt (192.168.213.151, 255.255.255.0, 192.168.213.2) ens34 -> ovirtgluster (192.168.152.151, 255.255.255.0) [host glu02] ens33 -> ovirtmgmt (192.168.213.152, 255.255.255.0, 192.168.213.2) ens34 -> ovirtgluster (192.168.152.152, 255.255.255.0) [host glu03] ens33 -> ovirtmgmt (192.168.213.153, 255.255.255.0, 192.168.213.2) ens34 -> ovirtgluster (192.168.152.153, 255.255.255.0) Do you know the right way to set the gateway IP on all hosts? Just two last questions: I was able to import an existing gluster = cluster using oVirt Engine, but I=E2=80=99m not able to create a new = volume because: - I can=E2=80=99t select a distributed disperse volume configuration = from oVirt Engine volume creation window - i can=E2=80=99t see the bricks to be used to create a new volume (but = I can import an existing volume without problem). Is there something that I can do to resolve the issues and complete my = first experience with oVirt? Thank you very much, Mauro T. --Apple-Mail=_7A672012-6D66-434F-8F68-C3419D9A8159 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=utf-8 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dutf-8"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" = class=3D"">Hi all,<div class=3D""><br class=3D""></div><div class=3D"">I = just started my first Ovirt Engine deploy using a dedicated (and = separated) virtual machine.</div><div class=3D"">I=E2=80=99m trying to = create and manage a test Gluster cluster using 3 =E2=80=9Cvirtual=E2=80=9D= hosts (hostnames are glu01, glu02, glu03)</div><div class=3D"">2 = different networks have been defined on the hosts (192.168.213.0/24 for = management network and 192.168.152.0/24 for gluster network).</div><div = class=3D"">Ovirt engine deploy completed without any problem, the hosts = have been added easily using ovirtmgmt network (bridgeless mgmt network) = and ovirtgluster (bridgeless gluster network).</div><div class=3D""><br = class=3D""></div><div class=3D"">Everything seems to be ok for this = first deploy, but I just noticed that the gateway is missing on the = target hosts:</div><div class=3D""><br class=3D""></div><div = class=3D""><div style=3D"margin: 0px; line-height: normal; font-family: = 'Courier New'; color: rgb(184, 180, 59); background-color: rgb(0, 0, = 0);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">[root@glu01 ~]# route</span></div><div = style=3D"margin: 0px; line-height: normal; font-family: 'Courier New'; = color: rgb(184, 180, 59); background-color: rgb(0, 0, 0);" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">Kernel IP routing table</span></div><div style=3D"margin: = 0px; line-height: normal; font-family: 'Courier New'; color: rgb(184, = 180, 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">Destination     Gateway         = Genmask         Flags Metric Ref    Use = Iface</span></div><div style=3D"margin: 0px; line-height: normal; = font-family: 'Courier New'; color: rgb(184, 180, 59); background-color: = rgb(0, 0, 0);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">link-local      0.0.0.0 =         255.255.0.0     U     = 1002   0        0 ens33</span></div><div = style=3D"margin: 0px; line-height: normal; font-family: 'Courier New'; = color: rgb(184, 180, 59); background-color: rgb(0, 0, 0);" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">link-local      0.0.0.0       =   255.255.0.0     U     1003   0  =       0 ens34</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">192.168.152.0   0.0.0.0         = 255.255.255.0   U     0      0  =       0 ens34</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">192.168.213.0   0.0.0.0         = 255.255.255.0   U     0      0  =       0 ens33</span></div><div class=3D""> <span class=3D"Apple-style-span" style=3D"border-collapse: separate; = font-variant-ligatures: normal; font-variant-position: normal; = font-variant-numeric: normal; font-variant-alternates: normal; = font-variant-east-asian: normal; line-height: normal; border-spacing: = 0px;"><span class=3D"Apple-style-span" style=3D"border-collapse: = separate; color: rgb(0, 0, 0); font-family: Helvetica; font-style: = normal; font-variant: normal; font-weight: normal; letter-spacing: = normal; line-height: normal; orphans: 2; text-align: -webkit-auto; = text-indent: 0px; text-transform: none; white-space: normal; widows: 2; = word-spacing: 0px; -webkit-border-horizontal-spacing: 0px; = -webkit-border-vertical-spacing: 0px; = -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: = auto; -webkit-text-stroke-width: 0px; "><div class=3D""><br = class=3D""></div><div class=3D""><div style=3D"margin: 0px; line-height: = normal; font-family: 'Courier New'; color: rgb(184, 180, 59); = background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">[root@glu02 ~]# route</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Kernel = IP routing table</span></div><div style=3D"margin: 0px; line-height: = normal; font-family: 'Courier New'; color: rgb(184, 180, 59); = background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">Destination     Gateway         = Genmask         Flags Metric Ref    Use = Iface</span></div><div style=3D"margin: 0px; line-height: normal; = font-family: 'Courier New'; color: rgb(184, 180, 59); background-color: = rgb(0, 0, 0);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">link-local      0.0.0.0 =         255.255.0.0     U     = 1002   0        0 ens33</span></div><div = style=3D"margin: 0px; line-height: normal; font-family: 'Courier New'; = color: rgb(184, 180, 59); background-color: rgb(0, 0, 0);" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">link-local      0.0.0.0       =   255.255.0.0     U     1003   0  =       0 ens34</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">192.168.152.0   0.0.0.0         = 255.255.255.0   U     0      0  =       0 ens34</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">192.168.213.0   0.0.0.0         = 255.255.255.0   U     0      0  =       0 ens33</span></div></div><div class=3D""><br = class=3D""></div><div class=3D""><div style=3D"margin: 0px; line-height: = normal; font-family: 'Courier New'; color: rgb(184, 180, 59); = background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">[root@glu03 ~]# route</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" class=3D"">Kernel = IP routing table</span></div><div style=3D"margin: 0px; line-height: = normal; font-family: 'Courier New'; color: rgb(184, 180, 59); = background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">Destination     Gateway         = Genmask         Flags Metric Ref    Use = Iface</span></div><div style=3D"margin: 0px; line-height: normal; = font-family: 'Courier New'; color: rgb(184, 180, 59); background-color: = rgb(0, 0, 0);" class=3D""><span style=3D"font-variant-ligatures: = no-common-ligatures" class=3D"">link-local      0.0.0.0 =         255.255.0.0     U     = 1002   0        0 ens33</span></div><div = style=3D"margin: 0px; line-height: normal; font-family: 'Courier New'; = color: rgb(184, 180, 59); background-color: rgb(0, 0, 0);" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">link-local      0.0.0.0       =   255.255.0.0     U     1003   0  =       0 ens34</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">192.168.152.0   0.0.0.0         = 255.255.255.0   U     0      0  =       0 ens34</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">192.168.213.0   0.0.0.0         = 255.255.255.0   U     0      0  =       0 ens33</span></div></div><div class=3D""><br = class=3D""></div><div class=3D"">Due to this problem I cannot reach = internet from ens33 nic (management network).</div><div class=3D"">I = just tried to add the gateway in ifcfg-ens33 configuration file but = gateway disappear after host reboot.<span style=3D"text-align: = -webkit-auto;" class=3D""> </span></div><div class=3D""><br = class=3D""></div><div class=3D""><div style=3D"margin: 0px; line-height: = normal; font-family: 'Courier New'; color: rgb(184, 180, 59); = background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">[root@glu01 ~]# cat = /etc/sysconfig/network-scripts/ifcfg-ens33</span></div><div = style=3D"margin: 0px; line-height: normal; font-family: 'Courier New'; = color: rgb(184, 180, 59); background-color: rgb(0, 0, 0);" = class=3D""><span style=3D"font-variant-ligatures: no-common-ligatures" = class=3D""># Generated by VDSM version = 4.19.28-1.el7.centos</span></div><div style=3D"margin: 0px; line-height: = normal; font-family: 'Courier New'; color: rgb(184, 180, 59); = background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">DEVICE=3Dens33</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">ONBOOT=3Dyes</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">IPADDR=3D192.168.213.151</span></div><div style=3D"margin: = 0px; line-height: normal; font-family: 'Courier New'; color: rgb(184, = 180, 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">NETMASK=3D255.255.255.0</span></div><div style=3D"margin: = 0px; line-height: normal; font-family: 'Courier New'; color: rgb(184, = 180, 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">BOOTPROTO=3Dnone</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">MTU=3D1500</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">DEFROUTE=3Dno</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">NM_CONTROLLED=3Dno</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">IPV6INIT=3Dyes</span></div><div style=3D"margin: 0px; = line-height: normal; font-family: 'Courier New'; color: rgb(184, 180, = 59); background-color: rgb(0, 0, 0);" class=3D""><span = style=3D"font-variant-ligatures: no-common-ligatures" = class=3D"">IPV6_AUTOCONF=3Dyes</span></div></div><div class=3D""><br = class=3D""></div><div class=3D"">The oVirt Engine network configuration = is the following one:</div><div class=3D""><br class=3D""></div><div = class=3D"">[host glu01]</div><div class=3D"">ens33 -> ovirtmgmt = (192.168.213.151, 255.255.255.0, 192.168.213.2)</div><div class=3D"">ens34= -> ovirtgluster (192.168.152.151, 255.255.255.0)</div><div = class=3D""><br class=3D""></div><div class=3D"">[host glu02]</div><div = class=3D""><div class=3D"">ens33 -> ovirtmgmt (192.168.213.152, = 255.255.255.0, 192.168.213.2)</div><div class=3D"">ens34 -> = ovirtgluster (192.168.152.152, 255.255.255.0)</div></div><div = class=3D""><br class=3D""></div><div class=3D"">[host glu03]</div><div = class=3D""><div class=3D"">ens33 -> ovirtmgmt (192.168.213.153, = 255.255.255.0, 192.168.213.2)</div><div class=3D"">ens34 -> = ovirtgluster (192.168.152.153, 255.255.255.0)</div></div><div = class=3D""><br class=3D""></div><div class=3D"">Do you know the right = way to set the gateway IP on all hosts?</div><div class=3D""><br = class=3D""></div><div class=3D"">Just two last questions: I was able to = import an existing gluster cluster using oVirt Engine, but I=E2=80=99m = not able to create a new volume because:</div><div class=3D""><br = class=3D""></div><div class=3D"">- I can=E2=80=99t select a distributed = disperse volume configuration from oVirt Engine volume creation = window</div><div class=3D"">- i can=E2=80=99t see the bricks to be used = to create a new volume (but I can import an existing volume without = problem).</div><div class=3D""><br class=3D""></div><div class=3D"">Is = there something that I can do to resolve the issues and complete my = first experience with oVirt?</div><div class=3D""><br = class=3D""></div><div class=3D"">Thank you very much,</div><div = class=3D"">Mauro T.</div></span></span> </div> <br class=3D""></div></body></html>= --Apple-Mail=_7A672012-6D66-434F-8F68-C3419D9A8159--

2 4

failed upgrade oVirt node 4.1.3 -> 4.1.5
by Matthias Leopold 04 Sep '17

04 Sep '17

hi, i'm sorry to write to this list again, but i failed to upgrade a freshly installed oVirt Node from version 4.1.3 to 4.1.5. it seems to be a SELinux related problem. i'm attaching imgbased.log + relevant lines from engine.log. is the skipped version (4.1.4) the problem? can i force upgrade to version 4.1.4? thx matthias

2 2

Limit number of vms
by qinglong.dong＠horebdata.cn 04 Sep '17

04 Sep '17

This is a multi-part message in MIME format. ------=_001_NextPart382345512738_=---- Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: base64 SGkgYWxsLA0KICAgICAgICBJIHdhbnQgdG8gbGltaXQgbnVtYmVyIG9mIHJ1bm5pbmcgdm1zIGlu IG92aXJ0LiBGb3IgZXhhbXBsZSwgYSB2bSBzaG91bGQgZmFpbCB0byBzdGFydCB3aGVuIHRoZXJl IGFyZSBlbm91Z2ggcnVubmluZyB2bXMuIElzIHRoZXJlIGFuIGVhc3kgd2F5IHRvIGRvIHRoaXMg c3VjaCBhcyBtb2RpZmluZyBhbiB2ZHNtIHNjcmlwdD8gV2lzaCBzb21lb25lIGNhbiBoZWxwLiBU aGFua3MhDQo= ------=_001_NextPart382345512738_=---- Content-Type: text/html; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable <html><head><meta http-equiv=3D"content-type" content=3D"text/html; charse= t=3DISO-8859-1"><style>body { line-height: 1.5; }body { font-size: 10.5pt;= font-family: ????; color: rgb(0, 0, 0); line-height: 1.5; }body { font-si= ze: 10.5pt; color: rgb(0, 0, 0); line-height: 1.5; }</style></head><body>= =0A<div><span></span>Hi all,</div>=0A<div>    <span style= =3D"font-size: 10.5pt; line-height: 1.5; background-color: window;"> =   I want to limit number of running vms in ovirt. For example, a vm = should fail to start when there are enough running vms. Is there an easy w= ay to do this such as modifing an vdsm script? Wish someone can help. Than= ks!</span></div>=0A</body></html> ------=_001_NextPart382345512738_=------

1 0

ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem
by Gary Balliet 03 Sep '17

03 Sep '17

Good day all. Just playing with ovirt. New to it but seems quite good. Single instance/nfs share/centos7/ovirt 4.1 Had a power outage and this error message is in my logs whilst trying to activate a downed host. The snippet below is from engine.log. 2017-09-01 13:32:03,092-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:32:03,097-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:32:04,547-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetAllVmStatsVDSCommand] (DefaultQuartzScheduler5) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetAllVmStatsVDSCommand(HostName = DellServer, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:32:04,547-07 INFO [org.ovirt.engine.core.vdsbroker.monitoring.PollVmStatsRefresher] (DefaultQuartzScheduler5) [77a871f9-4947-46c9-977f-db5f76cac358] Failed to fetch vms info for host 'DellServer' - skipping VMs monitoring. 2017-09-01 13:32:19,548-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:32:19,552-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:32:23,115-07 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler4) [77a871f9-4947-46c9-977f-db5f76cac358] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM DellServer command GetCapabilitiesVDS failed: General SSLEngine problem 2017-09-01 13:32:23,115-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler4) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VDSInfoReturn@65b16430' 2017-09-01 13:32:23,115-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler4) [77a871f9-4947-46c9-977f-db5f76cac358] HostName = DellServer 2017-09-01 13:32:23,116-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler4) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetCapabilitiesVDSCommand(HostName = DellServer, VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd', vds='Host[DellServer,b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd]'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:32:23,116-07 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (DefaultQuartzScheduler4) [77a871f9-4947-46c9-977f-db5f76cac358] Failure to refresh host 'DellServer' runtime info: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:32:26,118-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:32:26,122-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:32:39,550-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetAllVmStatsVDSCommand] (DefaultQuartzScheduler1) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetAllVmStatsVDSCommand(HostName = DellServer, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:32:39,551-07 INFO [org.ovirt.engine.core.vdsbroker.monitoring.PollVmStatsRefresher] (DefaultQuartzScheduler1) [77a871f9-4947-46c9-977f-db5f76cac358] Failed to fetch vms info for host 'DellServer' - skipping VMs monitoring. 2017-09-01 13:32:46,125-07 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM DellServer command GetCapabilitiesVDS failed: General SSLEngine problem 2017-09-01 13:32:46,125-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VDSInfoReturn@64999c2a' 2017-09-01 13:32:46,125-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] HostName = DellServer 2017-09-01 13:32:46,125-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetCapabilitiesVDSCommand(HostName = DellServer, VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd', vds='Host[DellServer,b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd]'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:32:46,126-07 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] Failure to refresh host 'DellServer' runtime info: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:32:49,128-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:32:49,132-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:32:54,553-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:32:54,557-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:33:08,564-07 INFO [org.ovirt.engine.core.bll.hostdeploy.UpdateVdsCommand] (default task-94) [25820586-e2be-4e48-b08b-1c687ae42def] Running command: UpdateVdsCommand internal: false. Entities affected : ID: b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd Type: VDSAction group EDIT_HOST_CONFIGURATION with role type ADMIN 2017-09-01 13:33:08,581-07 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-94) [25820586-e2be-4e48-b08b-1c687ae42def] EVENT_ID: VDS_ALERT_FENCE_IS_NOT_CONFIGURED(9,000), Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to verify Power Management configuration for Host DellServer. 2017-09-01 13:33:08,587-07 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-94) [25820586-e2be-4e48-b08b-1c687ae42def] EVENT_ID: USER_UPDATE_VDS(43), Correlation ID: 25820586-e2be-4e48-b08b-1c687ae42def, Call Stack: null, Custom Event ID: -1, Message: Host DellServer configuration was updated by admin@internal-authz. 2017-09-01 13:33:09,133-07 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM DellServer command GetCapabilitiesVDS failed: General SSLEngine problem 2017-09-01 13:33:09,133-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VDSInfoReturn@105a6e2d' 2017-09-01 13:33:09,133-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] HostName = DellServer 2017-09-01 13:33:09,134-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetCapabilitiesVDSCommand(HostName = DellServer, VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd', vds='Host[DellServer,b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd]'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:33:09,134-07 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (DefaultQuartzScheduler7) [77a871f9-4947-46c9-977f-db5f76cac358] Failure to refresh host 'DellServer' runtime info: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:33:12,138-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:33:12,143-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:33:14,556-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetAllVmStatsVDSCommand] (DefaultQuartzScheduler10) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetAllVmStatsVDSCommand(HostName = DellServer, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:33:14,557-07 INFO [org.ovirt.engine.core.vdsbroker.monitoring.PollVmStatsRefresher] (DefaultQuartzScheduler10) [77a871f9-4947-46c9-977f-db5f76cac358] Failed to fetch vms info for host 'DellServer' - skipping VMs monitoring. 2017-09-01 13:33:15,595-07 INFO [org.ovirt.engine.core.bll.MaintenanceNumberOfVdssCommand] (default task-113) [7c245327-298a-44b9-923d-f17f96f896ef] Running command: MaintenanceNumberOfVdssCommand internal: false. Entities affected : ID: b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2017-09-01 13:33:15,645-07 INFO [org.ovirt.engine.core.bll.MaintenanceVdsCommand] (default task-113) [7c245327-298a-44b9-923d-f17f96f896ef] Running command: MaintenanceVdsCommand internal: true. Entities affected : ID: b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd Type: VDS 2017-09-01 13:33:15,685-07 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (default task-113) [7c245327-298a-44b9-923d-f17f96f896ef] START, SetVdsStatusVDSCommand(HostName = DellServer, SetVdsStatusVDSCommandParameters:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd', status='Maintenance', nonOperationalReason='NONE', stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 294a6334 2017-09-01 13:33:29,558-07 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.1.147 2017-09-01 13:33:29,562-07 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2017-09-01 13:33:32,144-07 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler9) [77a871f9-4947-46c9-977f-db5f76cac358] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM DellServer command GetCapabilitiesVDS failed: General SSLEngine problem 2017-09-01 13:33:32,144-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler9) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VDSInfoReturn@5423e827' 2017-09-01 13:33:32,144-07 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler9) [77a871f9-4947-46c9-977f-db5f76cac358] HostName = DellServer 2017-09-01 13:33:32,144-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler9) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetCapabilitiesVDSCommand(HostName = DellServer, VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd', vds='Host[DellServer,b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd]'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:33:32,144-07 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (DefaultQuartzScheduler9) [77a871f9-4947-46c9-977f-db5f76cac358] Failure to refresh host 'DellServer' runtime info: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:33:32,148-07 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (default task-113) [7c245327-298a-44b9-923d-f17f96f896ef] FINISH, SetVdsStatusVDSCommand, log id: 294a6334 2017-09-01 13:33:32,161-07 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [7c245327-298a-44b9-923d-f17f96f896ef] EVENT_ID: USER_VDS_MAINTENANCE_WITHOUT_REASON(620), Correlation ID: 7c245327-298a-44b9-923d-f17f96f896ef, Job ID: b5557bff-6d87-48cc-bf0b-12d1262614b7, Call Stack: null, Custom Event ID: -1, Message: Host DellServer was switched to Maintenance mode by admin@internal-authz. 2017-09-01 13:33:49,561-07 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetAllVmStatsVDSCommand] (DefaultQuartzScheduler10) [77a871f9-4947-46c9-977f-db5f76cac358] Command 'GetAllVmStatsVDSCommand(HostName = DellServer, VdsIdVDSCommandParametersBase:{runAsync='true', hostId='b8ceb86f-c4e1-4bbd-afad-5044ebe9eddd'})' execution failed: VDSGenericException: VDSNetworkException: General SSLEngine problem 2017-09-01 13:33:49,562-07 INFO [org.ovirt.engine.core.vdsbroker.monitoring.PollVmStatsRefresher] (DefaultQuartzScheduler10) [77a871f9-4947-46c9-977f-db5f76cac358] Failed to fetch vms info for host 'DellServer' - skipping VMs monitoring. My google fu has shown that it appears as though the engine and the vdsm aren't talking ? Any ideas how to fix other than a restore from backup? Gary Balliet, headgeek(a)technogeeks.ca <headgeek(a)technogeeks.ca>

2 1

Install failed when adding host in Ovirt
by Khoi Thinh 03 Sep '17

03 Sep '17

Hi everyone, I have a question regard of host in Ovirt. Is it possible that we can add host which is registered in different data-center? -- *Khoi Thinh*

2 1

Cannot delete the snapshot
by wai chun hung 02 Sep '17

02 Sep '17

Dear all, This is my first time to ask question in this place. Thank you for time to read my question first. Yesterday, i wanted to delete the snapshot on oVirt Engine Web Administration. However, it took so long to delete a snapshot and it still in process. Due to the "snapshot error", i cannot run the virtual machine as i shut it down before. Is there anyone has some idea how to fix it? The following information maybe useful for debugging . On web administration: Removing Snapshot <the snapshot name> Sep 1, 2017 6:06:58 PM N/A <the snapshot id> <green tick>Validating Sep 1, 2017 6:06:58 PM until Sep 1, 2017 6:06:58 PM <In process> Executing Sep 1, 2017 6:06:58 PM N/A On Engine log. 2017-09-02 20:57:10,700+08 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (DefaultQuartzScheduler6) [70471886-a5cb-404c-80db-b8469092aa8e] Command 'RemoveSnapshot' (id: '78ee1e62-26ea-403d-b518-9e3d3be995c2') waiting on child command id: '5f2e8197-704f-453c-bea8-74186e5ca95c' type:'RemoveSnapshotSingleDiskLive' to complete

1 0

vm grouping
by david caughey 02 Sep '17

02 Sep '17

Hi There, Our 3 node Data center is up and running and I am populating it with the required vm's. It's a test lab so I want to provide pre fabricated environments for different users. I have already set up a CentOS box for nested virtualisation which works quite well but I would really like to group multiple machines together in to one template so that when a user deploys or chooses the template they get all the vm's together as one. Is there a way to do this in oVirt without nested virtualisation? I particularly want to provide a ceph set up with 3 nodes 1 mgmt server and a couple of clients, which I had planned to do through nested virt but believe that multiple vm's would be cleaner. Any suggestions as to how to achieve this? Any help or hints would be appreciated, BR/David

2 1

Native Access on gluster storage domain
by Stefano Danzi 01 Sep '17

01 Sep '17

This is a multi-part message in MIME format. --------------315A38E1E900138D11EEA015 Content-Type: text/plain; charset=iso-8859-15; format=flowed Content-Transfer-Encoding: 7bit Hello, I have a test environment with a sigle host and self hosted engine running oVirt Engine: 4.1.5.2-1.el7.centos I what to try the option "Native Access on gluster storage domain" but I get an error because I have to put the host in maintenance mode. I can't do that because I have a single host so the hosted engine can't be migrated. There are a way to change this option but apply it at next reboot? --------------315A38E1E900138D11EEA015 Content-Type: text/html; charset=iso-8859-15 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=iso-8859-15"> </head> <body text="#000000" bgcolor="#FFFFFF"> Hello, <br> I have a test environment with a sigle host and self hosted engine running <span class="gwt-InlineLabel" style="box-sizing: border-box;">oVirt Engine: 4.1.5.2-1.el7.centos<br> <br> I what to try the option "Native Access on gluster storage domain" but I get an error because I have to put the <br> host in maintenance mode. I can't do that because I have a single host so the hosted engine can't be migrated.<br> <br> There are a way to change this option but apply it at next reboot?<br> </span> </body> </html> --------------315A38E1E900138D11EEA015--

2 3

Still messages about metrics related packages update after 4.1.5
by Gianluca Cecchi 01 Sep '17

01 Sep '17

It seems I'm still having problems with metrics related packages after upgrade to 4.1.5. Similar to this one at 4.1 time: http://lists.ovirt.org/pipermail/users/2017-February/079670.html A cluster with hosts at 4.1.1 has been updated to 4.1.5 Hosts are CentOS 7.3 yum update method on host was executed to make the update, after putting it into maintenance And reboot done. Now after 2 days engine still complains about updates for both hosts: Check for available updates on host ov300 was completed successfully with message 'found updates for packages rubygem-fluent-plugin-collectd-nest-0.1.4-1.el7, rubygem-fluent-plugin-viaq_data_model-0.0.5-1.el7'. Check for available updates on host ov301 was completed successfully with message 'found updates for packages rubygem-fluent-plugin-collectd-nest-0.1.4-1.el7, rubygem-fluent-plugin-viaq_data_model-0.0.5-1.el7'. Actually the packages are not installed at all on host. Probably released between 4. and 4.1.5. On both hosts I have executed yum install rubygem-fluent-plugin-collectd-nest-0.1.4-1.el7 rubygem-fluent-plugin-viaq_data_model-0.0.5-1.el7 but in my opinion it should be corrected so that in case of new packages between minor versions, they are automatically installed during update in some way eg make the new packages a dependency of the new ovirt-release rpm so that during update Aug 29 12:13:17 Updated: ovirt-release41-4.1.5-1.el7.centos.noarch they are automatically pulled in. Thanks, Gianluca

1 0

Re: [ovirt-users] [ovirt-devel] vdsm vds.dispatcher
by Gary Pedretty 01 Sep '17

01 Sep '17

--Apple-Mail=_C9F1A44C-AE04-4DA2-AFA9-47FFA59F9CD7 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=utf-8 By someone, I assume you mean some other process running on the host, or = possibly the engine? Gary ------------------------------------------------------------------------ Gary Pedretty gary(a)ravnalaska.net = <mailto:gary@eraalaska.net> Systems Manager www.flyravn.com = <http://www.flyravn.com/> Ravn Alaska /\ 907-450-7251 5245 Airport Industrial Road / \/\ 907-450-7238 fax Fairbanks, Alaska 99709 /\ / \ \ Second greatest commandment Serving All of Alaska / \/ /\ \ \/\ =E2=80=9CLove your = neighbor as Green, green as far as the eyes can see yourself=E2=80=9D = Matt 22:39 ------------------------------------------------------------------------ > On Aug 31, 2017, at 6:17 AM, Martin Sivak <msivak(a)redhat.com = <mailto:msivak@redhat.com>> wrote: >=20 > One more thing: >=20 > MOM's getStatistics is actually called by VDSM stats reporting code, > so my guess here is that someone queries VDSM for stats pretty hard, > VDSM then asks MOM for details. >=20 > Martin >=20 > On Thu, Aug 31, 2017 at 4:14 PM, Martin Sivak <msivak(a)redhat.com = <mailto:msivak@redhat.com>> wrote: >> Hi, >>=20 >>> 2017-08-27 23:15:41,199 - mom.RPCServer - INFO - ping() >>> 2017-08-27 23:15:41,200 - mom.RPCServer - INFO - getStatistics() >>> 2017-08-27 23:15:43,946 - mom.RPCServer - INFO - ping() >>> 2017-08-27 23:15:43,947 - mom.RPCServer - INFO - getStatistics() >>=20 >> These are logs from mom's RPC server, someone is calling MOM way too >> often. Well about 25 times per minute if my math is right. >>=20 >> The only client I know about is actually VDSM. >>=20 >> Martin >>=20 >>=20 >> On Mon, Aug 28, 2017 at 9:17 AM, Gary Pedretty <gary(a)ravnalaska.net = <mailto:gary@ravnalaska.net>> wrote: >>> Be glad to provide logs to help diagnose this. I see nothing = unusual in the >>> vdsm.log >>>=20 >>> mom.log shows the following almost as frequently as the messages log = entries >>>=20 >>> 2017-08-27 23:15:41,199 - mom.RPCServer - INFO - ping() >>> 2017-08-27 23:15:41,200 - mom.RPCServer - INFO - getStatistics() >>> 2017-08-27 23:15:43,946 - mom.RPCServer - INFO - ping() >>> 2017-08-27 23:15:43,947 - mom.RPCServer - INFO - getStatistics() >>>=20 >>>=20 _______________________________________________ Devel mailing list Devel(a)ovirt.org <mailto:Devel@ovirt.org> http://lists.ovirt.org/mailman/listinfo/devel = <http://lists.ovirt.org/mailman/listinfo/devel>= --Apple-Mail=_C9F1A44C-AE04-4DA2-AFA9-47FFA59F9CD7 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=utf-8 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dutf-8"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" = class=3D""><span style=3D"font-family: LucidaGrande;" class=3D"">By = someone, I assume you mean some other process running on the host, or = possibly the engine?</span><div class=3D"" style=3D"font-family: = LucidaGrande;"><br class=3D""></div><div class=3D"" style=3D"font-family: = LucidaGrande;">Gary</div><div class=3D"" style=3D"font-family: = LucidaGrande;"><br class=3D""></div><div class=3D"" style=3D"font-family: = LucidaGrande;"><br class=3D""><div class=3D""><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><div class=3D"" = style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; = -webkit-line-break: after-white-space;"><font face=3D"Menlo" class=3D"" = style=3D"font-size: 12px;"><div = class=3D"">---------------------------------------------------------------= ---------</div><div class=3D"">Gary Pedretty         =                     =            <a = href=3D"mailto:gary@eraalaska.net" = class=3D"">gary(a)ravnalaska.net</a></div><div class=3D"">Systems Manager =                     =                     =  <a href=3D"http://www.flyravn.com" = class=3D"">www.flyravn.com</a></div><div class=3D"">Ravn Alaska   =                     =     /\                 =    907-450-7251</div><div class=3D"">5245 Airport Industrial = Road         /  \/\         =     907-450-7238 fax</div><div class=3D"">Fairbanks, Alaska =  99709        /\  /    \ \ = Second greatest commandment</div></font><font face=3D"Monaco" = class=3D""><span class=3D"" style=3D"font-size: 12px;">Serving All of = Alaska          /  \/  /\  \ \/\ =   =E2=80=9CLove your neighbor as</span></font><br class=3D"" = style=3D"font-family: Monaco;"><font face=3D"Menlo" class=3D""><span = class=3D"" style=3D"font-size: 12px;">Green, green as far as the eyes = can see             yourself=E2=80=9D Matt = 22:39</span></font><div class=3D"" style=3D"font-family: = Menlo;"></div><font face=3D"Menlo" class=3D"" style=3D"font-size: = 12px;"></font><span class=3D"" style=3D"font-size: 12px;"><font = face=3D"Menlo" class=3D""><div = class=3D"">---------------------------------------------------------------= ---------</div></font></span><div class=3D""><font face=3D"Menlo" = class=3D"" style=3D"font-size: 12px;"><br = class=3D""></font></div></div></div></div></div></div></div></div></div></= div></div></div></div><br class=3D"Apple-interchange-newline"><br = class=3D"Apple-interchange-newline"></div><br class=3D""><div = class=3D""><blockquote type=3D"cite" class=3D""><div class=3D"">On Aug = 31, 2017, at 6:17 AM, Martin Sivak <<a = href=3D"mailto:msivak@redhat.com" class=3D"">msivak(a)redhat.com</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><div class=3D""><span = class=3D"" style=3D"font-family: Monaco; font-size: 12px; float: none; = display: inline !important;">One more thing:</span><br class=3D"" = style=3D"font-family: Monaco; font-size: 12px;"><br class=3D"" = style=3D"font-family: Monaco; font-size: 12px;"><span class=3D"" = style=3D"font-family: Monaco; font-size: 12px; float: none; display: = inline !important;">MOM's getStatistics is actually called by VDSM stats = reporting code,</span><br class=3D"" style=3D"font-family: Monaco; = font-size: 12px;"><span class=3D"" style=3D"font-family: Monaco; = font-size: 12px; float: none; display: inline !important;">so my guess = here is that someone queries VDSM for stats pretty hard,</span><br = class=3D"" style=3D"font-family: Monaco; font-size: 12px;"><span = class=3D"" style=3D"font-family: Monaco; font-size: 12px; float: none; = display: inline !important;">VDSM then asks MOM for details.</span><br = class=3D"" style=3D"font-family: Monaco; font-size: 12px;"><br class=3D"" = style=3D"font-family: Monaco; font-size: 12px;"><span class=3D"" = style=3D"font-family: Monaco; font-size: 12px; float: none; display: = inline !important;">Martin</span><br class=3D"" style=3D"font-family: = Monaco; font-size: 12px;"><br class=3D"" style=3D"font-family: Monaco; = font-size: 12px;"><span class=3D"" style=3D"font-family: Monaco; = font-size: 12px; float: none; display: inline !important;">On Thu, Aug = 31, 2017 at 4:14 PM, Martin Sivak <</span><a = href=3D"mailto:msivak@redhat.com" class=3D"" style=3D"font-family: = Monaco; font-size: 12px;">msivak(a)redhat.com</a><span class=3D"" = style=3D"font-family: Monaco; font-size: 12px; float: none; display: = inline !important;">> wrote:</span><br class=3D"" style=3D"font-family:= Monaco; font-size: 12px;"><blockquote type=3D"cite" class=3D"" = style=3D"font-family: Monaco; font-size: 12px;">Hi,<br class=3D""><br = class=3D""><blockquote type=3D"cite" class=3D"">2017-08-27 23:15:41,199 = - mom.RPCServer - INFO - ping()<br class=3D"">2017-08-27 23:15:41,200 - = mom.RPCServer - INFO - getStatistics()<br class=3D"">2017-08-27 = 23:15:43,946 - mom.RPCServer - INFO - ping()<br class=3D"">2017-08-27 = 23:15:43,947 - mom.RPCServer - INFO - getStatistics()<br = class=3D""></blockquote><br class=3D"">These are logs from mom's RPC = server, someone is calling MOM way too<br class=3D"">often. Well about = 25 times per minute if my math is right.<br class=3D""><br class=3D"">The = only client I know about is actually VDSM.<br class=3D""><br = class=3D"">Martin<br class=3D""><br class=3D""><br class=3D"">On Mon, = Aug 28, 2017 at 9:17 AM, Gary Pedretty <<a = href=3D"mailto:gary@ravnalaska.net" class=3D"">gary(a)ravnalaska.net</a>>= wrote:<br class=3D""><blockquote type=3D"cite" class=3D"">Be glad to = provide logs to help diagnose this.  I see nothing unusual in = the<br class=3D"">vdsm.log<br class=3D""><br class=3D"">mom.log shows = the following almost as frequently as the messages log entries<br = class=3D""><br class=3D"">2017-08-27 23:15:41,199 - mom.RPCServer - INFO = - ping()<br class=3D"">2017-08-27 23:15:41,200 - mom.RPCServer - INFO - = getStatistics()<br class=3D"">2017-08-27 23:15:43,946 - mom.RPCServer - = INFO - ping()<br class=3D"">2017-08-27 23:15:43,947 - mom.RPCServer - = INFO - getStatistics()<br class=3D""><br class=3D""><br = class=3D""></blockquote></blockquote></div></blockquote></div><br = class=3D""></div><span style=3D"font-family: LucidaGrande;" = class=3D"">_______________________________________________</span><br = style=3D"font-family: LucidaGrande;" class=3D""><span = style=3D"font-family: LucidaGrande;" class=3D"">Devel mailing = list</span><br style=3D"font-family: LucidaGrande;" class=3D""><a = href=3D"mailto:Devel@ovirt.org" style=3D"font-family: LucidaGrande;" = class=3D"">Devel(a)ovirt.org</a><br style=3D"font-family: LucidaGrande;" = class=3D""><a href=3D"http://lists.ovirt.org/mailman/listinfo/devel" = style=3D"font-family: LucidaGrande;" = class=3D"">http://lists.ovirt.org/mailman/listinfo/devel</a></body></html>= --Apple-Mail=_C9F1A44C-AE04-4DA2-AFA9-47FFA59F9CD7--

1 0

Re: [ovirt-users] oVirt engine with different VM id
by Martin Sivak 31 Aug '17

31 Aug '17

Hi, you can remote the hosted engine storage domain from the engine as well. It should also be re-imported. We had cases where destroying the domain ended up with a locked SD, but removing the SD and re-importing is the proper way here. Best regards PS: Re-adding the mailing list, we should really set a proper Reply-To header.. Martin Sivak On Thu, Aug 31, 2017 at 2:07 PM, Misak Khachatryan <kmisak(a)gmail.com> wrote: > Hi, > > I would love to, but: > > Error while executing action: > > HostedEngine: > > Cannot remove VM. The relevant Storage Domain's status is Inactive. > > it seems i should somehow fix storage domain first ... > > engine=# update storage_domain_static set id = > '2e2820f3-8c3d-487d-9a56-1b8cd278ec6c' where id = > 'c44343af-cc4a-4bb7-a548-0c6f609d60d5'; > ERROR: update or delete on table "storage_domain_static" violates > foreign key constraint "disk_profiles_storage_domain_id_fkey" on table > "disk_profiles" > DETAIL: Key (id)=(c44343af-cc4a-4bb7-a548-0c6f609d60d5) is still > referenced from table "disk_profiles". > > engine=# update disk_profiles set storage_domain_id = > '2e2820f3-8c3d-487d-9a56-1b8cd278ec6c' where id = > 'a6d71571-a13a-415b-9f97-635f17cbe67d'; > ERROR: insert or update on table "disk_profiles" violates foreign key > constraint "disk_profiles_storage_domain_id_fkey" > DETAIL: Key (storage_domain_id)=(2e2820f3-8c3d-487d-9a56-1b8cd278ec6c) > is not present in table "storage_domain_static". > > engine=# select * from storage_domain_static; > id | storage > | storage_name | storage_domain_type | storage_type | > storage_domain_format_type | _create_date | > _update_date | recoverable | last_time_used_as_maste > r | storage_description | storage_comment | wipe_after_delete | > warning_low_space_indicator | critical_space_action_blocker | > first_metadata_device | vg_metadata_device | discard_after_delete > --------------------------------------+--------------------------------------+------------------------+---------------------+--------------+----------------------------+-------------------------------+-------------------------------+-------------+------------------------ > --+---------------------+-----------------+-------------------+-----------------------------+-------------------------------+-----------------------+--------------------+---------------------- > 072fbaa1-08f3-4a40-9f34-a5ca22dd1d74 | > ceab03af-7220-4d42-8f5c-9b557f5d29af | ovirt-image-repository | > 4 | 8 | 0 | 2016-11-02 > 21:27:22.118586+04 | | t | > | | | f | > | | > | | f > 51c903f6-df83-4510-ac69-c164742ca6e7 | > 34b72ce0-6ad7-4180-a8a1-2acfd45824d7 | iso | > 2 | 7 | 0 | 2016-11-02 > 23:26:21.296635+04 | | t | > 0 | | | f | > 10 | 5 | > | | f > ece1f05c-97c9-4482-a1a5-914397cddd35 | > dd38f31f-7bdc-463c-9ae4-fcd4dc8c99fd | export | > 3 | 1 | 0 | 2016-12-14 > 11:28:15.736746+04 | 2016-12-14 11:33:12.872562+04 | t | > 0 | Export | | f | > 10 | 5 | > | | f > 07ea2089-a82b-4ca1-9c8b-54e3895b2ed4 | > d1e9e3c8-aaf3-43de-ae80-101e5bd2574f | data | > 0 | 7 | 4 | 2016-11-02 > 23:24:43.402629+04 | 2017-02-22 17:20:42.721092+04 | t | > 0 | | | f | > 10 | 5 | > | | f > c44343af-cc4a-4bb7-a548-0c6f609d60d5 | > 8b54ce35-3187-4fba-a2c7-6b604d077f5b | hosted_storage | > 1 | 7 | 4 | 2016-11-02 > 23:26:13.165435+04 | 2017-02-22 17:20:42.721092+04 | t | > 0 | | | f | > 10 | 5 | > | | f > 004ca4dd-c621-463d-b514-ccfe07ef99d7 | > b31a7de9-e789-4ece-9f99-4b150bf581db | virt4-Local | > 0 | 4 | 4 | 2017-03-23 > 09:02:26.37006+04 | 2017-03-23 09:02:31.887534+04 | t | > 0 | | | f | > 10 | 5 | > | | f > (6 rows) > > engine=# select * from storage_domain_dynamic; > id | available_disk_size | > used_disk_size | _update_date | external_status > --------------------------------------+---------------------+----------------+-------------------------------+----------------- > 072fbaa1-08f3-4a40-9f34-a5ca22dd1d74 | | > | | 0 > 07ea2089-a82b-4ca1-9c8b-54e3895b2ed4 | 1102 | > 313 | 2017-08-31 14:20:47.444292+04 | 0 > 51c903f6-df83-4510-ac69-c164742ca6e7 | 499 | > 0 | 2017-08-31 14:20:47.45047+04 | 0 > ece1f05c-97c9-4482-a1a5-914397cddd35 | 9669 | > 6005 | 2017-08-31 14:20:47.454629+04 | 0 > c44343af-cc4a-4bb7-a548-0c6f609d60d5 | | > | 2017-08-31 14:18:37.199062+04 | 0 > 004ca4dd-c621-463d-b514-ccfe07ef99d7 | 348 | > 1 | 2017-08-31 14:20:42.671688+04 | 0 > (6 rows) > > > engine=# select * from disk_profiles; > id | name | > storage_domain_id | qos_id | description | > _create_date | _update_date > --------------------------------------+----------------+--------------------------------------+--------+-------------+-------------------------------+-------------- > 04257bff-e95d-4380-b120-adcbe46ae213 | data | > 07ea2089-a82b-4ca1-9c8b-54e3895b2ed4 | | | > 2016-11-02 23:24:43.528982+04 | > a6d71571-a13a-415b-9f97-635f17cbe67d | hosted_storage | > c44343af-cc4a-4bb7-a548-0c6f609d60d5 | | | > 2016-11-02 23:26:13.178791+04 | > 0f9ecdb7-4fca-45e7-9b5c-971b50d4c12e | virt4-Local | > 004ca4dd-c621-463d-b514-ccfe07ef99d7 | | | > 2017-03-23 09:02:26.409574+04 | > (3 rows) > > > Best regards, > Misak Khachatryan > > > On Thu, Aug 31, 2017 at 3:33 PM, Martin Sivak <msivak(a)redhat.com> wrote: >> Hi, >> >> I would not touch the database in this case. I would just delete the >> old hosted engine VM from the webadmin and wait for it to reimport >> itself. >> >> But I haven't played with this mechanism for some time. >> >> Best regards >> >> Martin Sivak >> >> On Thu, Aug 31, 2017 at 1:17 PM, Misak Khachatryan <kmisak(a)gmail.com> wrote: >>> Hi, >>> >>> Yesterday someone powered off our storage, and all my 3 hosts lose >>> their disks. After 2 days of recovering i managed to bring back >>> everything, except engine VM, which is online but not visible to >>> itself. >>> >>> I did new deployment of VM, restored backup and started engine setup. >>> After manual database updates, my all VMs and hosts are OK now, but >>> engine. I have engine VM with different VM id running than in >>> database. >>> >>> I've tried this with no luck. >>> >>> engine=# update vm_static set vm_guid = >>> '75072b32-6f93-4c38-8f18-825004072c1a' where vm_guid =(select >>> vm_guid from vm_static where vm_name = 'HostedEngine'); >>> ERROR: update or delete on table "vm_static" violates foreign key >>> constraint "fk_disk_vm_element_vm_static" on table "disk_vm_element" >>> DETAIL: Key (vm_guid)=(d81ccb53-2594-49db-b69a-04c73b504c59) is still >>> referenced from table "disk_vm_element". >>> >>> >>> Right now i've deployed engine on all 3 hosts but see this picture: >>> >>> [root@virt3 ~]# hosted-engine --vm-status >>> >>> >>> !! Cluster is in GLOBAL MAINTENANCE mode !! >>> >>> >>> >>> >>> [root@virt3 ~]# vdsClient -s 0 list >>> >>> 75072b32-6f93-4c38-8f18-825004072c1a >>> Status = Up >>> statusTime = 4397337690 >>> kvmEnable = true >>> emulatedMachine = pc >>> afterMigrationStatus = >>> pid = 5280 >>> devices = [{'device': 'console', 'specParams': {}, 'type': >>> 'console', 'deviceId': '2b6b0e87-c86a-4144-ad39-40d5bfe25df1', >>> 'alias': 'console0'}, {'device': 'memballoon', 'specParams': {'model': >>> 'none'}, 'type': 'balloon', 'target': 16777216, 'alias': 'balloon0'}, >>> {'specParams': {'source': 'random'}, 'alias': 'rng0', 'address': >>> {'slot': '0x07', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', >>> 'function': '0x0'}, 'device': 'virtio', 'model': 'virtio', 'type': >>> 'rng'}, {'device': 'unix', 'alias': 'channel0', 'type': 'channel', >>> 'addr >>> ess': {'bus': '0', 'controller': '0', 'type': 'virtio-serial', 'port': >>> '1'}}, {'device': 'unix', 'alias': 'channel1', 'type': 'channel', >>> 'address': {'bus': '0', 'controller': '0', 'type': 'virtio-serial', >>> 'port': '2'}}, {'device': 'unix', 'alias': 'channel2', 'type': 'ch >>> annel', 'address': {'bus': '0', 'controller': '0', 'type': >>> 'virtio-serial', 'port': '3'}}, {'device': 'scsi', 'alias': 'scsi0', >>> 'model': 'virtio-scsi', 'type': 'controller', 'address': {'slot': >>> '0x04', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': >>> '0x0'}} >>> , {'device': 'usb', 'alias': 'usb', 'type': 'controller', 'address': >>> {'slot': '0x01', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', >>> 'function': '0x2'}}, {'device': 'ide', 'alias': 'ide', 'type': >>> 'controller', 'address': {'slot': '0x01', 'bus': '0x00', 'domain': >>> '0x00 >>> 00', 'type': 'pci', 'function': '0x1'}}, {'device': 'virtio-serial', >>> 'alias': 'virtio-serial0', 'type': 'controller', 'address': {'slot': >>> '0x05', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': >>> '0x0'}}, {'device': 'vga', 'alias': 'video0', 'type': 'video', >>> 'address': {'slot': '0x02', 'bus': '0x00', 'domain': '0x0000', 'type': >>> 'pci', 'function': '0x0'}}, {'device': 'vnc', 'type': 'graphics', >>> 'port': '5900'}, {'nicModel': 'pv', 'macAddr': '00:16:3e:01:29:95', >>> 'linkActive': True, 'network': 'ovirtmgmt', 'alias': 'net0', 'spec >>> Params': {}, 'deviceId': 'd348a068-063b-4a40-9119-a3d34f6c7db4', >>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': >>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface', >>> 'name': 'vnet0'}, {'index': '2', 'iface': 'ide', 'name': 'hdc', 'al >>> ias': 'ide0-1-0', 'specParams': {}, 'readonly': 'True', 'deviceId': >>> 'e738b50b-c200-4429-8489-4519325339c7', 'address': {'bus': '1', >>> 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, >>> 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, >>> {'poolI >>> D': '00000000-0000-0000-0000-000000000000', 'volumeInfo': {'path': >>> 'engine/2e2820f3-8c3d-487d-9a56-1b8cd278ec6c/images/5deeac2d-18d7-4622-9371-ebf965d2bd6b/60aa51b7-32eb-41a9-940d-9489b0375a3d', >>> 'protocol': 'gluster', 'hosts': [{'port': '0', 'transport': 'tcp', >>> 'name': ' >>> virt1'}, {'port': '0', 'transport': 'tcp', 'name': 'virt2'}, {'port': >>> '0', 'transport': 'tcp', 'name': 'virt3'}]}, 'index': '0', 'iface': >>> 'virtio', 'apparentsize': '62277025792', 'specParams': {}, 'imageID': >>> '5deeac2d-18d7-4622-9371-ebf965d2bd6b', 'readonly': 'False', 's >>> hared': 'exclusive', 'truesize': '3255476224', 'type': 'disk', >>> 'domainID': '2e2820f3-8c3d-487d-9a56-1b8cd278ec6c', 'reqsize': '0', >>> 'format': 'raw', 'deviceId': '5deeac2d-18d7-4622-9371-ebf965d2bd6b', >>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': >>> 'pci', 'function': '0x0'}, 'device': 'disk', 'path': >>> '/var/run/vdsm/storage/2e2820f3-8c3d-487d-9a56-1b8cd278ec6c/5deeac2d-18d7-4622-9371-ebf965d2bd6b/60aa51b7-32eb-41a9-940d-9489b0375a3d', >>> 'propagateErrors': 'off', 'optional': 'false', 'name': 'vda', >>> 'bootOrder': '1', 'v >>> olumeID': '60aa51b7-32eb-41a9-940d-9489b0375a3d', 'alias': >>> 'virtio-disk0', 'volumeChain': [{'domainID': >>> '2e2820f3-8c3d-487d-9a56-1b8cd278ec6c', 'leaseOffset': 0, 'volumeID': >>> '60aa51b7-32eb-41a9-940d-9489b0375a3d', 'leasePath': >>> '/rhev/data-center/mnt/glusterSD/virt1:_engi >>> ne/2e2820f3-8c3d-487d-9a56-1b8cd278ec6c/images/5deeac2d-18d7-4622-9371-ebf965d2bd6b/60aa51b7-32eb-41a9-940d-9489b0375a3d.lease', >>> 'imageID': '5deeac2d-18d7-4622-9371-ebf965d2bd6b', 'path': >>> '/rhev/data-center/mnt/glusterSD/virt1:_engine/2e2820f3-8c3d-487d-9a56-1b8cd278ec6c >>> /images/5deeac2d-18d7-4622-9371-ebf965d2bd6b/60aa51b7-32eb-41a9-940d-9489b0375a3d'}]}] >>> guestDiskMapping = {'5deeac2d-18d7-4622-9': {'name': >>> '/dev/vda'}, 'QEMU_DVD-ROM_QM00003': {'name': '/dev/sr0'}} >>> vmType = kvm >>> display = vnc >>> memSize = 16384 >>> cpuType = Westmere >>> spiceSecureChannels = >>> smain,sdisplay,sinputs,scursor,splayback,srecord,ssmartcard,susbredir >>> smp = 4 >>> vmName = HostedEngine >>> clientIp = >>> maxVCpus = 16 >>> [root@virt3 ~]# >>> >>> [root@virt3 ~]# hosted-engine --vm-status >>> >>> >>> !! Cluster is in GLOBAL MAINTENANCE mode !! >>> >>> >>> >>> --== Host 1 status ==-- >>> >>> conf_on_shared_storage : True >>> Status up-to-date : True >>> Hostname : virt1.management.gnc.am >>> Host ID : 1 >>> Engine status : {"reason": "vm not running on >>> this host", "health": "bad", "vm": "down", "detail": "unknown"} >>> Score : 3400 >>> stopped : False >>> Local maintenance : False >>> crc32 : ef49e5b4 >>> local_conf_timestamp : 7515 >>> Host timestamp : 7512 >>> Extra metadata (valid at timestamp): >>> metadata_parse_version=1 >>> metadata_feature_version=1 >>> timestamp=7512 (Thu Aug 31 15:14:59 2017) >>> host-id=1 >>> score=3400 >>> vm_conf_refresh_time=7515 (Thu Aug 31 15:15:01 2017) >>> conf_on_shared_storage=True >>> maintenance=False >>> state=GlobalMaintenance >>> stopped=False >>> >>> >>> --== Host 3 status ==-- >>> >>> conf_on_shared_storage : True >>> Status up-to-date : True >>> Hostname : virt3 >>> Host ID : 3 >>> Engine status : {"health": "good", "vm": "up", >>> "detail": "up"} >>> Score : 3400 >>> stopped : False >>> Local maintenance : False >>> crc32 : 4a85111c >>> local_conf_timestamp : 102896 >>> Host timestamp : 102893 >>> Extra metadata (valid at timestamp): >>> metadata_parse_version=1 >>> metadata_feature_version=1 >>> timestamp=102893 (Thu Aug 31 15:14:46 2017) >>> host-id=3 >>> score=3400 >>> vm_conf_refresh_time=102896 (Thu Aug 31 15:14:49 2017) >>> conf_on_shared_storage=True >>> maintenance=False >>> state=GlobalMaintenance >>> stopped=False >>> >>> >>> !! Cluster is in GLOBAL MAINTENANCE mode !! >>> >>> Also my storage domain for hosted engine is inactive, can't activate >>> it it gives this error in web console: >>> >>> VDSM command GetImagesListVDS failed: Storage domain does not exist: >>> (u'c44343af-cc4a-4bb7-a548-0c6f609d60d5',) >>> >>> >>> It seems I should fiddle with database a bit more, but is't scary thing for me. >>> >>> Any help? >>> >>> >>> >>> Best regards, >>> Misak Khachatryan >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users

2 2