- Users - oVirt List Archives

[Python SDK] Setup Host network with IP address
by TranceWorldLogic . 24 Mar '17

24 Mar '17

Hi, I am trying to setup network via python sdk as shown below: myhost_service.setup_networks( modified_network_attachments = [ types.NetworkAttachment( host = myhost, host_nic = types.HostNic(name="eth0"), network = types.Network(name="Hello"), ip_address_assignments = [ types.IpAddressAssignment( assignment_method = types.BootProtocol.STATIC, ip = types.Ip( address="192.168.300.10", netmask="255.255.255.0", version=types.IpVersion.V4, ), ) ], ), ] ) But I am getting below error: "ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[Bad format of IPv4 address]". HTTP response code is 400." Please help me. Ovirt release version = 4.0 Thanks, ~Rohit

1 1

ovirt Node Building
by shubham dubey 24 Mar '17

24 Mar '17

Hello, I have recently build ovirt-engine from source using this link( http://www.ovirt.org/develop/developer-guide/engine/engine-development-envi…) Now I want to build ovirt node using this( http://www.ovirt.org/develop/projects/node/building/) I am confused that can I build that node on the same system as of ovirt-engine or I need to do these steps on any other system. Thanks, Shubham

1 0

strange behavior of ovirt-node ng update
by Sergey Kulikov 23 Mar '17

23 Mar '17

I have one Ovirt Node in my test cluster(others are centos), I'm observing strange behavior of update checker in engine. In options I can see: engine=# select * from vdc_options where option_name='OvirtNodePackageNamesForCheckUpdate'; option_id | option_name | option_value | version -----------+-------------------------------------+----------------------------+--------- 124 | OvirtNodePackageNamesForCheckUpdate | ovirt-node-ng-image-update | general (1 row) so it tries to check for updated version of ovirt-node-ng-image-update, but there is no ovirt-node-ng-image-update package installed inside updated node image, so engine always shows available updates on this node to the same version: > Check for available updates on host XXX was completed successfully with message 'found updates for packages ovirt-node-ng-image-4.1.1-1.el7.centos, ovirt-node-ng-image-update-4.1.1-1.el7.centos'. I saw a bug in bugzilla, that it should be fixed in 4.0 Initially engine was set up as 4.x version, after that updated between releases and finally to 4.1.0, and today to 4.1.1. I saw this behavior on 4.1.0 node and also on 4.1.1, on this page: http://www.ovirt.org/node/4.0/update/ Maybe my OvirtNodePackageNamesForCheckUpdate was changed between releases, but engine-setup left it untouched and i should change it manually? If so, what it should look like? --

1 0

ovirt-shell backup
by Marcin Kruk 23 Mar '17

23 Mar '17

Hello is it possible to execute below actions from the ovirth-shell: 1. Make snapshot ( ovirt-shell -E 'add snapshot --parent-vm-name <vmname> --description <desc> ) 2. Make clone from snaphot above ( ? ) 3. Export clone ( ? )

2 1

VMs changing to unknown state
by Michael Watters 23 Mar '17

23 Mar '17

I have an ovirt host running ovirt 4.0 which keeps putting the VMs running on that host into an unknown state. I checked the vdsm logs and there are several errors similar to below. Mar 20 10:16:11 ovirt-node-production3.example.com vdsm[17123]: vdsm root ERROR Unhandled exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 372, in wrapper return f(*a, **kw) File "/usr/share/vdsm/virt/migration.py", line 624, in run self.monitor_migration() File "/usr/share/vdsm/virt/migration.py", line 657, in monitor_migration job_stats = self._vm._dom.jobStats() File "/usr/lib/python2.7/site-packages/vdsm/virt/virdomain.py", line 69, in f ret = attr(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line 123, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 917, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1387, in jobStats if ret is None: raise libvirtError ('virDomainGetJobStats() failed', dom=self) libvirtError: Requested operation is not valid: domain is not running Restarting vdsmd resolves the issue however I would like to resolve the issue permanently. Does anybody know what would cause this?

1 0

Roadmap
by Julián Tete 23 Mar '17

23 Mar '17

Hi Friends of oVirt Is there any roadmap for oVirt for 2017 and 2018? Any roadmap for oVirt by versions? 4.2.X, 4.3.X, 4.4.X Thank you

2 2

NFS ISO domain from hosted-engine VM
by Devin A. Bougie 23 Mar '17

23 Mar '17

Hi, All. Are there any recommendations or best practices WRT whether or not to host an NFS ISO domain from the hosted-engine VM (running the oVirt Engine Appliance)? We have a hosted-engine 4.1.1 cluster up and running, and now just have to decide where to serve the NFS ISO domain from. Many thanks, Devin

2 2

hosted-engine with iscsi storage domain
by Devin A. Bougie 23 Mar '17

23 Mar '17

We have a hosted-engine running on 4.1 with an iSCSI hosted_storage domain, and are able to import the domain. However, we cannot attache the domain to the data center. Just to make sure I'm not missing something basic, does the engine VM need to be able to connect to the iSCSI target itself? In other words, does the iSCSI traffic need to go over the ovirtmgmt bridged network? Currently we have the iSCSI SAN on a separate subnet from ovirtmgmt, so the hosted-engine VM can't directly see the iSCSI storage. Thanks, Devin

2 4

Python-SDK: ovirtsdk4.Connection object autologout?
by nicolas＠devels.es 23 Mar '17

23 Mar '17

Hi, We've recently upgraded from oVirt 4.0.x to 4.1.0 and it seems that the behavior of a script we wrote in Python-SDK has changed slightly. We have a script that needs to be executed forever (daemon mode). This daemon creates an ovirtsdk4.Connection object and uses the same Connection object all the time. conn = sdk.Connection( url=URI, username=USERNAME, password=PASSWORD, ca_file=CAFILE ) Between iterations we have ~5 minutes delays which we accomplish with a time.sleep(...) call. After some of these iterations (5 or 6), when trying to perform an operation on the Connection object (in this case, listing all SDs): try: sys_serv = conn.system_service() sd_serv = sys_serv.storage_domains_service() storages = sd_serv.list(search=sd_search_query) except Error, e: log('ERR: Error getting storage domains: %s' % (e)) We start getting exceptions (i.e., the sd_serv.list() call throwing an Error exception) with this message: ERR: Error getting storage domains: HTTP response code is 401. I believe this has something to do with the Connection object expiring (even if it's not idle more than 5 minutes at any time). Is there a way to "refresh" the Connection object so it doesn't auto-logout (assuming this is the actual problem)? As I said, this started happening as of oVirt 4.1.0. ovirt-engine-sdk-python version is 4.1.1. Any ideas? Thanks.

4 8

ACTION_TYPE_FAILED_NO_SERVERS_FOR_CLUSTER
by Davide Ferrari 23 Mar '17

23 Mar '17

I get this error when I click " Gluster status is disconnected for this host. Restart Glusterd service" in the Genral tab of a the sole host in a new cluster. I've enabled "Manage Gluster" in the cluster options and already created a new gluster volume (via CLI) with bricks only in the hosts that are part of this new cluster. -- Davide Ferrari Senior Systems Engineer

2 2

How to attach Host device to VM ?
by TranceWorldLogic . 23 Mar '17

23 Mar '17

Hi, I have created an LVM device( /dev/myvg/lvm1 ) in Host. I want that device to attach with VM. Can I attach device to VM via vdsClient ? If yes, please provide me example command that I need to run. Thanks, ~Rohit

1 0

Expand an ovirt+glusterfs cluster
by Davide Ferrari 23 Mar '17

23 Mar '17

Hello I have a 4 node oVirt 4.0 cluster running on top of glusterfs volumes, managed by the oVirt cluster (option ticked in the cluster properties) Now, I'm adding several new nodes to this cluster with a better CPU (Broadwell vs Haswell) but now comes the "bad" part. Out of enthusiasm I've already added storage from these new servers to the data volume already present and used by the current cluster. In fact now ovirt has detected new hosts and it's asking me if I want to add these host to the cluster. But there are two problems: 1) I want to create a new, Broadwell cluster 2) I'm using a separate VLAN+domain name for gluster, and oVirt is proposing me to use the gluster (storage) domain names as the new hosts identifier. What are the right steps/actions to take now? It's a running production system. Thanks in advance -- Davide Ferrari Senior Systems Engineer

2 5

ovirt 4.1 - mount recovery iso for failing vm ?
by Ian Neilsen 23 Mar '17

23 Mar '17

Guys I've spent the day reading any and all content on recovering a failing to boot vm under ovirt 4.1 and am finding many cmds are deprecated , old processes no longer work. What is the correct way to mount an iso to perform recovery on a boot partition of a failing VM in oVirt 4.1? vm.conf, virsh, virt-edit, vmhost.xml, vdsClient, new vda, way too many options and no singular right way to do this that works well. -- Ian Neilsen Mobile: 0424 379 762 Linkedin: http://au.linkedin.com/in/ianneilsen Twitter : ineilsen

1 1

how to handle mount options for hosted engine on glusterfs
by /dev/null 23 Mar '17

23 Mar '17

Hi, how do i make the hosted_storage aware of gluster server failure? In --deploy i cannot provide backup-volfile-servers. In /etc/ovirt-hosted-engine/hosted-engine.conf there is an mnt_options line, but i read (https://github.com/oVirt/ovirt-hosted-engine-setup/commit/995c6a65ab897d804…) that this settings get lost during deployment on seconday servers. Is there an official way to deal with that? Should this option be set manualy on all nodes? Thanks! /dev/null -- Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht und ist - aktuelle Virenscanner vorausgesetzt - sauber. For all your IT requirements visit: http://www.transtec.co.uk

3 8

How to set priority for HA VM via Python SDK ?
by TranceWorldLogic . 23 Mar '17

23 Mar '17

Hi, I want to set priority of Highly Available VM as High via python SDK. I provided information as shown below: vm = self.vms_service.add( vm = types.Vm ( high_availability = types.HighAvailability( enabled = True, priority = 1, ), ), ) As see above priority we have to provide as number but in GUI we can choose drop down menu as ("LOW", "MID" and "HIGH"). I wan to set priority as "HIGH", which integer value I have to set in priority ? I tried with 1 and 3 it shows "LOW" in both cases. Please help me. Thanks, ~Rohit

2 1

Interest in contributing to oVirt
by Konrad Djimeli 22 Mar '17

22 Mar '17

Hello, My name is Konrad Djimeli a third year Computer Science Student at the University of Buea, Cameroon. I am interested in contributing to oVirt and I would like to work on the Google Summer of Code project "ovirt4cli". I am very comfortable working with Python and I have experience working with web services like REST. Please I would appreciate any suggestion on how to get started and to better familiarize myself with the project. Thanks Konrad http://djimeli.me/

2 2

no vm.conf?
by Michael Kleinpaste 22 Mar '17

22 Mar '17

Hello all, I wanted to adjust the hosted-engine VM to use a little less CPU and memory. However, none of my hosts have the vm.conf file in /etc/ovirt-hosted-engine-ha/ as instructions say it should be. Has the process for changing the hosted-engine VM settings been changed with 4.1? -- *Michael Kleinpaste* Senior Systems Administrator SharperLending, LLC. www.SharperLending.com Michael.Kleinpaste(a)SharperLending.com (509) 324-1230 Fax: (509) 324-1234

3 5

[ANN] oVirt 4.1.1 Release is now available
by Sandro Bonazzola 22 Mar '17

22 Mar '17

The oVirt Project is pleased to announce the availability of the oVirt 4.1.1 Release, as of March 22nd, 2017 This update is the first in a series of stabilization updates to the 4.1 series. 4.1.1 brings 35 enhancements and more than 400 bugfixes, including more than 170 high or urgent severity fixes, on top of oVirt 4.1 series This release is available now for: * Fedora 24 (tech preview) * Red Hat Enterprise Linux 7.3 or later * CentOS Linux (or similar) 7.3 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.3 or later * CentOS Linux (or similar) 7.3 or later * Fedora 24 (tech preview) See the release notes [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt node and oVirt Live will be available soon [4] - oVirt Engine Appliance has been already built Additional Resources: * Read more about the oVirt 4.1.1 release highlights: http://www.ovirt.org/release/4.1.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1.1/ [4] http://resources.ovirt.org/pub/ovirt-4.1/iso/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Lost our HostedEngineVM
by Matt Emma 22 Mar '17

22 Mar '17

--_000_DM5PR2001MB1884F384577C85E3DE0FF816963D0DM5PR2001MB1884_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable We're in a bit of a panic mode, so excuse any shortness. We had a storage failure. We rebooted a VMHost that had the hostedengine VM= - The HostedENgine did not try to move to the other hosts. We've since res= tored storage and we are able to successfully restart the paused VMs. We kn= ow the HostedEngine's VM ID is there a way we can force load it from the mo= unted storage? -Matt --_000_DM5PR2001MB1884F384577C85E3DE0FF816963D0DM5PR2001MB1884_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">We’re in a bit of a panic mode, so excuse any = shortness. <o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">We had a storage failure. We rebooted a VMHost that = had the hostedengine VM - The HostedENgine did not try to move to the other= hosts. We’ve since restored storage and we are able to successfully = restart the paused VMs. We know the HostedEngine’s VM ID is there a way we can force load it from the mounted storage? <o:p><= /o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">-Matt <o:p></o:p></p> </div> </body> </html> --_000_DM5PR2001MB1884F384577C85E3DE0FF816963D0DM5PR2001MB1884_--

3 2

OSSEC reporting hidden processes
by Charles Kozler 22 Mar '17

22 Mar '17

Hi - I am wondering why OSSEC would be reporting hidden processes on my ovirt nodes? I run OSSEC across the infrastructure and multiple ovirt clusters have assorted nodes that will report a process is running but does not have an entry in /proc and thus "possible rootkit" alert is fired I am well aware that I do not have rootkits on these systems but am wondering what exactly inside ovirt is causing this to trigger? Or any ideas? Below is sample alert. All my google-fu turns up is that a process would have to **try** to hide itself from /proc, so curious what this is inside ovirt. Thanks! ------------- OSSEC HIDS Notification. 2017 Mar 20 11:54:47 Received From: (ovirtnode2.mydomain.com2) any->rootcheck Rule: 510 fired (level 7) -> "Host-based anomaly detection event (rootcheck)." Portion of the log(s): Process '24574' hidden from /proc. Possible kernel level rootkit. --END OF NOTIFICATION ------------

2 6

Cloud init guide
by Endre Karlson 22 Mar '17

22 Mar '17

Is there a guide to how to use cloud-init with ubuntu on ovirt?

1 0

How to Feature Request
by FERNANDO FREDIANI 22 Mar '17

22 Mar '17

Where is the best place to put feature requests ? Bugzilla with priority 'unspecified' or 'low' or anywhere else ? Thanks Fernando

2 1

Re: [ovirt-users] Adding posix compliant FS
by Fred Rolland 22 Mar '17

22 Mar '17

Please send Vdsm log. Thanks On Fri, Mar 17, 2017 at 8:46 PM, carl langlois <crl.langlois(a)gmail.com> wrote: > Hi, > > The link that you send is for NFS strorage but i am trying to add a POSIX > compliant. > > [image: Inline image 1] > > > > > when i press okey it mount the disk to : > > [root@ovhost4 ~]# ls -al /rhev/data-center/mnt/_dev_dm-4/ > total 28 > drwxr-xr-x. 4 vdsm kvm 4096 Mar 16 12:12 . > drwxr-xr-x. 6 vdsm kvm 4096 Mar 17 13:35 .. > drwxr-xr-x. 2 vdsm kvm 16384 Mar 16 11:42 lost+found > drwxr-xr-x. 4 vdsm kvm 4096 Mar 16 12:12 .Trash-0 > > > and doing a touch with vdsm user work > > [root@ovhost4 ~]# sudo -u vdsm touch /rhev/data-center/mnt/_dev_dm-4/test > [root@ovhost4 ~]# ls -al /rhev/data-center/mnt/_dev_dm-4/ > total 28 > drwxr-xr-x. 4 vdsm kvm 4096 Mar 17 13:44 . > drwxr-xr-x. 6 vdsm kvm 4096 Mar 17 13:35 .. > drwxr-xr-x. 2 vdsm kvm 16384 Mar 16 11:42 lost+found > -rw-r--r--. 1 vdsm kvm 0 Mar 17 13:44 test > drwxr-xr-x. 4 vdsm kvm 4096 Mar 16 12:12 .Trash-0 > > > But it fail with a general exception error and the storage does not exist > in ovirt > > any help would be appreciated. > > > Which log you need to see? > > Thanks > > > > Le jeu. 16 mars 2017 17:02, Fred Rolland <frolland(a)redhat.com> a écrit : > >> Hi, >> >> Can you check if the folder permissions are OK ? >> Check [1] for more details. >> >> Can you share more of the log ? >> >> >> [1] https://www.ovirt.org/documentation/how-to/troubleshooting/t >> roubleshooting-nfs-storage-issues/ >> >> On Thu, Mar 16, 2017 at 7:49 PM, carl langlois <crl.langlois(a)gmail.com> >> wrote: >> >> Hi Guys, >> >> I am trying to add a posix FS on one of my host. Ovirt in actually >> mounting it but fail with "Error while executing action Add Storage >> Connection: General Exception" >> >> If i look in the vdsm.log i cant see >> >> sonrpc.Executor/7::DEBUG::2017-03-16 12:39:28,248::fileUtils::209::Storage.fileUtils::(createdir) >> Creating directory: /rhev/data-center/mnt/_dev_dm-3 mode: None >> jsonrpc.Executor/7::DEBUG::2017-03-16 12:39:28,248::fileUtils::218::Storage.fileUtils::(createdir) >> Using existing directory: /rhev/data-center/mnt/_dev_dm-3 >> jsonrpc.Executor/7::INFO::2017-03-16 12:39:28,248::mount::226::storage.Mount::(mount) >> mounting /dev/dm-3 at /rhev/data-center/mnt/_dev_dm-3 >> jsonrpc.Executor/7::DEBUG::2017-03-16 12:39:28,270::utils::871::storage.Mount::(stopwatch) >> /rhev/data-center/mnt/_dev_dm-3 mounted: 0.02 seconds >> jsonrpc.Executor/7::ERROR::2017-03-16 12:39:28,271::hsm::2403::Storage.HSM::(connectStorageServer) >> Could not connect to storageServer >> Traceback (most recent call last): >> File "/usr/share/vdsm/storage/hsm.py", line 2400, in >> connectStorageServer >> conObj.connect() >> File "/usr/share/vdsm/storage/storageServer.py", line 242, in connect >> self.getMountObj().getRecord().fs_file) >> File "/usr/lib/python2.7/site-packages/vdsm/storage/mount.py", line >> 260, in getRecord >> (self.fs_spec, self.fs_file)) >> OSError: [Errno 2] Mount of `/dev/dm-3` at `/rhev/data-center/mnt/_dev_dm-3` >> does not exist >> >> >> any help would be appreciated. >> >> Thanks >> >> CL >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >>

2 12

The Hosted Engine Storage Domain doesn't exist. It should be imported into the setup.
by Paolo Margara 22 Mar '17

22 Mar '17

Hi list, I'm working on a system running on oVirt 3.6 and the Engine is reporting the warning "The Hosted Engine Storage Domain doesn't exist. It should be imported into the setup." repeatedly in the Events tab into the Admin Portal. I've read into the list that Hosted Engine Storage Domain should be imported automatically into the setup during the upgrade to 3.6 (original setup was on 3.5), but this not happened while the HostedEngine is correctly visible into the VM tab after the upgrade. The Hosted Engine Storage Domain is on a dedicated gluster volume but considering that, if I remember correctly, oVirt 3.5 at that time did not support gluster as a backend for the HostedEngine at that time I had installed the engine using gluster's NFS server using 'localhost:/hosted-engine' as a mount point. Currently on every nodes I can read into the log of the ovirt-hosted-engine-ha agent the following lines: MainThread::INFO::2017-03-17 14:04:17,773::hosted_engine::462::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400) MainThread::INFO::2017-03-17 14:04:17,774::hosted_engine::467::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host virtnode-0-1 (id: 2 , score: 3400) MainThread::INFO::2017-03-17 14:04:27,956::hosted_engine::613::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2017-03-17 14:04:28,055::hosted_engine::658::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2017-03-17 14:04:28,078::storage_server::218::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2017-03-17 14:04:28,278::storage_server::222::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2017-03-17 14:04:28,398::storage_server::230::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2017-03-17 14:04:28,822::hosted_engine::685::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2017-03-17 14:04:28,822::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2017-03-17 14:04:29,308::hosted_engine::688::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain MainThread::INFO::2017-03-17 14:04:29,309::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2017-03-17 14:04:29,567::ovf_store::104::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2017-03-17 14:04:29,691::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from O VF_STORE, falling back to initial vm.conf ...and the following lines into the logfile engine.log inside the Hosted Engine: 2017-03-16 07:36:28,087 INFO [org.ovirt.engine.core.bll.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-8-thread-38) [236d315c] Lock Acquired to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='null'}' 2017-03-16 07:36:28,115 WARN [org.ovirt.engine.core.bll.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-8-thread-38) [236d315c] CanDoAction of action 'ImportHostedEngineStorageDomain' failed for user SYSTEM. Reasons: VAR__ACTION__ADD,VAR__TYPE__STORAGE__DOMAIN,ACTION_TYPE_FAILED_STORAGE_DOMAIN_NOT_EXIST 2017-03-16 07:36:28,116 INFO [org.ovirt.engine.core.bll.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-8-thread-38) [236d315c] Lock freed to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='null'}' How can I safely import the Hosted Engine Storage Domain into my setup? In this situation is safe to upgrade to oVirt 4.0? Greetings, Paolo

3 6

How to enable vmdisk property ?
by TranceWorldLogic . 22 Mar '17

22 Mar '17

Hi, I want to use local storage for VM and hence I want to enable vmdisk custom property in ovirt. How to enable vmdisk in ovirt-engine ? Thanks, ~Rohit

2 4