- Users - oVirt List Archives

[ANN] oVirt 3.6.1 Second Release Candidate is now available for testing
by Sandro Bonazzola 03 Dec '15

03 Dec '15

The oVirt Project is pleased to announce the availability of the Second Release Candidate of oVirt 3.6.1 for testing, as of December 3rd, 2015. This release is available now for Fedora 22, Red Hat Enterprise Linux 6.7, CentOS Linux 6.7 (or similar) and Red Hat Enterprise Linux >= 7.1, CentOS Linux >= 7.1 (or similar). This release supports Hypervisor Hosts running Red Hat Enterprise Linux >= 7.1, CentOS Linux >= 7.1 (or similar) and Fedora 22. Highly experimental support for Debian 8.2 Jessie has been added too. This release candidate includes updated packages for: - ovirt-engine - ovirt-engine-extension-aaa-jdbc - ovirt-hosted-engine-ha - ovirt-hosted-engine-setup - vdsm This release of oVirt 3.6.1 includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live ISO will be available soon[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6.1_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Re: [ovirt-users] HA cluster
by Ryan Barry 02 Dec '15

02 Dec '15

On Wed, Dec 2, 2015 at 5:05 AM, <users-request(a)ovirt.org> wrote: > On Wed, Dec 2, 2015 at 12:19 PM, Budur Nagaraju <nbudoor(a)gmail.com> wrote: > > > I have installed KVM in the nested environment in ESXi6.x version is > that > > recommended ? > > > > I often use KVM over KVM in nested environment but honestly I never tried > to run KVM over ESXi but I suspect that all of your issues comes from > there. > > It should be fine in ESXi as well, as long as the VMX for that VM has vhv.enabled=true, and the config for the VM is reloaded. > > > apart from Hosted engine is there any other alternate way to configure > > Engine HA cluster ? > > > > Nothing else from the project. You can use two external VMs in cluster with > pacemaker but it's completely up to you. >

1 0

Upgrading engine 3.5.5-1.el6 to latest patches issue (and resolved)
by Scott Worthington 02 Dec '15

02 Dec '15

Hello, This is just an informational e-mail for others who are updating their 3.5 systems on CentOS 6.7 who may experience the same issue that I experienced. I am upgrading a stand alone 3.5.5-1.el6 engine on CentOS 6.7 (no High Availability cruft) to the latest patches just recently released. The DWH and report engine are also installed on this same stand alone system. I did a 'yum update' and the following was downloaded & updated: Dec 02 08:26:26 Updated: postgresql-libs-8.4.20-4.el6_7.x86_64 Dec 02 08:26:27 Updated: ovirt-engine-lib-3.5.6.2-1.el6.noarch Dec 02 08:26:28 Updated: ovirt-engine-setup-base-3.5.6.2-1.el6.noarch Dec 02 08:26:29 Updated: ovirt-engine-setup-plugin-ovirt-engine-common-3.5.6.2-1.el6.noarch Dec 02 08:26:30 Updated: ovirt-engine-setup-plugin-websocket-proxy-3.5.6.2-1.el6.noarch Dec 02 08:26:31 Updated: ovirt-engine-setup-plugin-ovirt-engine-3.5.6.2-1.el6.noarch Dec 02 08:26:33 Updated: postgresql-8.4.20-4.el6_7.x86_64 Dec 02 08:26:35 Updated: postgresql-server-8.4.20-4.el6_7.x86_64 Dec 02 08:26:35 Updated: ovirt-engine-setup-3.5.6.2-1.el6.noarch Dec 02 08:26:36 Updated: ovirt-engine-websocket-proxy-3.5.6.2-1.el6.noarch Dec 02 08:26:36 Updated: ovirt-engine-extensions-api-impl-3.5.6.2-1.el6.noarch Dec 02 08:26:37 Updated: ovirt-engine-sdk-python-3.5.6.0-1.el6.noarch Dec 02 08:26:41 Updated: ovirt-guest-tools-iso-3.5-8.fc22.noarch Dec 02 08:26:50 Updated: 1:java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el6_7.x86_64 Here is where I ran into an issue.. Running an 'engine-setup' to load the latest patches caused this: [ INFO ] Cleaning async tasks and compensations [ INFO ] Checking the Engine database consistency [ INFO ] Stage: Transaction setup [ INFO ] Stopping dwh service [ INFO ] Stopping reports service [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping websocket-proxy service [ ERROR ] dwhd is currently running. Its hostname is tpa-ovirt-engine-01.allianceoneinc.com. Please stop it before running Setup. [ ERROR ] Failed to execute stage 'Transaction setup': dwhd is currently running [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20151202083052-q8131e.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20151202083138-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed I did a "ps auxwww | grep ovirt" and "ps auxwww | grep dhw", but came up with nothing. In fact, there was nothing obviously 'ovirt' related running. To get the "engine-setup" to work, I thought that perhaps something was stuck running. So I did... service ovirt-engine stop service ovirt-engine-dwhd stop service ovirt-engine-reportsd stop service ovirt-engine-websocket-proxy stop Followed by... engine-setup ...and still got the error that the DWH was still running. Not to waste time, I figured that a reboot might clear and/or reset out some process that I am not aware of. I did not want anything ovirt engine related starting up, so I examined what was running on start up: chkconfig --list | grep ovirt | grep on Which returned (sorry for wraps, it's thunderbird): ovirt-engine 0:off 1:off 2:on 3:on 4:on 5:on 6:off ovirt-engine-dwhd 0:off 1:off 2:on 3:on 4:on 5:on 6:off ovirt-engine-reportsd 0:off 1:off 2:on 3:on 4:on 5:on 6:off ovirt-fence-kdump-listener 0:off 1:off 2:on 3:on 4:on 5:on 6:off ovirt-websocket-proxy 0:off 1:off 2:on 3:on 4:on 5:on 6:off I turned these off on boot: chkconfig ovirt-engine off chkconfig ovirt-engine-dwhd off chkconfig ovirt-engine-reportsd off chkconfig ovirt-fence-kdump-listener off chkconfig ovirt-websocket-proxy off Rebooted the server, logged back in, and 'engine-setup' ran flawlessly. After the upgrade, I turned the services back on for the next reboot: chkconfig ovirt-engine on chkconfig ovirt-engine-dwhd on chkconfig ovirt-engine-reportsd on chkconfig ovirt-fence-kdump-listener on chkconfig ovirt-websocket-proxy on Hope that helps someone else.

2 1

Re: [ovirt-users] . Failing to add iSCSI storage domain Users Digest, Vol 51, Issue 16
by Jean-Pierre Ribeauville 02 Dec '15

02 Dec '15

Hi, Failure reason was the following : the initiator IQN wasn't declared on the iSCSI server. Sorry for disturbing for nothing. Regards, J.P. -----Message d'origine----- De : users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] De la part de users-request(a)ovirt.org Envoyé : mercredi 2 décembre 2015 11:42 À : users(a)ovirt.org Objet : Users Digest, Vol 51, Issue 16 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Failing to add iSCSI storage domain (Jean-Pierre Ribeauville) 2. Re: HA cluster (Simone Tiraboschi) ---------------------------------------------------------------------- Message: 1 Date: Wed, 2 Dec 2015 10:41:11 +0000 From: Jean-Pierre Ribeauville <jpribeauville(a)axway.com> To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: [ovirt-users] Failing to add iSCSI storage domain Message-ID: <1051EFB4D3A1704680C38CCAAC5836D2929DC082(a)WPTXMAIL2.ptx.axway.int> Content-Type: text/plain; charset="iso-8859-1" Hi, By using 3.5 ovirt , I'm trying to add a iSCSI storage domain to my datacenter. When clicking on discover button , I got following error : No new devices were found. This may be due to either: incorrect multipath configuration on the Host or wrong address of the iscsi target or a failure to authenticate on the target device. Please consult your Storage Administrator. I restart sanlock service on the host ( it's a RHEL 7) ; no positive effect. In engine.log found this : ... IQNListReturnForXmlRpc [mStatus=StatusForXmlRpc [mCode=475, mMessage=Failed discovery of iSCSI targets: "portal=IscsiPortal(hostname=u'10.147.60.90', port=3260), err=(21, [], ['iscsiadm: No portals found'])"]] 2015-12-02 11:28:31,468 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCommand] (ajp-/127.0.0.1:8702-5) HostName = ldc01omv01 2015-12-02 11:28:31,468 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCommand] (ajp-/127.0.0.1:8702-5) Command DiscoverSendTargetsVDSCommand(HostName = ldc01omv01, HostId = 09bb3024-170f-48a1-a78a-951a2c61c680, connection={ id: null, connection: 10.147.60.90, iqn: null, vfsType: null, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };) execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVDS, error = Failed discovery of iSCSI targets: "portal=IscsiPortal(hostname=u'10.147.60.90', port=3260), err=(21, [], ['iscsiadm: No portals found'])" 2015-12-02 11:28:31,468 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCommand] (ajp-/127.0.0.1:8702-5) FINISH, DiscoverSendTargetsVDSCommand, log id: 3023392e 2015-12-02 11:28:31,468 ERROR [org.ovirt.engine.core.bll.storage.DiscoverSendTargetsQuery] (ajp-/127.0.0.1:8702-5) Query DiscoverSendTargetsQuery failed. Exception message is VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVDS, error = Failed discovery of iSCSI targets: "portal=IscsiPortal(hostname=u'10.147.60.90', port=3260), err=(21, [], ['iscsiadm: No portals found'])" (Failed with error iSCSIDiscoveryError and code 475) : org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVDS, error = Failed discovery of iSCSI targets: "portal=IscsiPortal(hostname=u'10.147.60.90', port=3260), err=(21, [], ['iscsiadm: No portals found'])" (Failed with error iSCSIDiscoveryError and code 475): org.ovirt.engine.core.commo n.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVDS, error = Failed discovery of iSCSI targets: "portal=IscsiPortal(hostname=u'10.147.60.90', port=3260), err=(21, [], ['iscsiadm: No portals found'])" (Failed with error iSCSIDiscoveryError and code 475) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:117) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.storage.DiscoverSendTargetsQuery.executeQueryCommand(DiscoverSendTargetsQuery.java:16) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:73) [bll.jar:] ... In order to check iSCSI discovering via another way, I run this command from ovirt manager system command prompt : iscsiadm -m discovery -t st -p <iSCSI Server Address> I got a correct device lists. Thanks for help. J.P. Ribeauville P: +33.(0).1.47.17.20.49 . Puteaux 3 Etage 5 Bureau 4 jpribeauville(a)axway.com<mailto:jpribeauville@axway.com> http://www.axway.com<http://www.axway.com/> P Pensez ? l'environnement avant d'imprimer.

1 0

Failing to add iSCSI storage domain
by Jean-Pierre Ribeauville 02 Dec '15

02 Dec '15

--_000_1051EFB4D3A1704680C38CCAAC5836D2929DC082WPTXMAIL2ptxaxw_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, By using 3.5 ovirt , I'm trying to add a iSCSI storage domain to my datace= nter. When clicking on discover button , I got following error : No new devices were found. This may be due to either: incorrect multipath c= onfiguration on the Host or wrong address of the iscsi target or a failure = to authenticate on the target device. Please consult your Storage Administr= ator. I restart sanlock service on the host ( it's a RHEL 7) ; no positive effec= t. In engine.log found this : ... IQNListReturnForXmlRpc [mStatus=3DStatusForXmlRpc [mCode=3D475, mMessage=3D= Failed discovery of iSCSI targets: "portal=3DIscsiPortal(hostname=3Du'10.14= 7.60.90', port=3D3260), err=3D(21, [], ['iscsiadm: No portals found'])"]] 2015-12-02 11:28:31,468 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.Di= scoverSendTargetsVDSCommand] (ajp-/127.0.0.1:8702-5) HostName =3D ldc01omv0= 1 2015-12-02 11:28:31,468 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.Di= scoverSendTargetsVDSCommand] (ajp-/127.0.0.1:8702-5) Command DiscoverSendTa= rgetsVDSCommand(HostName =3D ldc01omv01, HostId =3D 09bb3024-170f-48a1-a78a= -951a2c61c680, connection=3D{ id: null, connection: 10.147.60.90, iqn: null= , vfsType: null, mountOptions: null, nfsVersion: null, nfsRetrans: null, nf= sTimeo: null };) execution failed. Exception: VDSErrorException: VDSGeneric= Exception: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVD= S, error =3D Failed discovery of iSCSI targets: "portal=3DIscsiPortal(hostn= ame=3Du'10.147.60.90', port=3D3260), err=3D(21, [], ['iscsiadm: No portals = found'])" 2015-12-02 11:28:31,468 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.Di= scoverSendTargetsVDSCommand] (ajp-/127.0.0.1:8702-5) FINISH, DiscoverSendTa= rgetsVDSCommand, log id: 3023392e 2015-12-02 11:28:31,468 ERROR [org.ovirt.engine.core.bll.storage.DiscoverSe= ndTargetsQuery] (ajp-/127.0.0.1:8702-5) Query DiscoverSendTargetsQuery fail= ed. Exception message is VdcBLLException: org.ovirt.engine.core.vdsbroker.v= dsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed = in vdscommand to DiscoverSendTargetsVDS, error =3D Failed discovery of iSCS= I targets: "portal=3DIscsiPortal(hostname=3Du'10.147.60.90', port=3D3260), = err=3D(21, [], ['iscsiadm: No portals found'])" (Failed with error iSCSIDis= coveryError and code 475) : org.ovirt.engine.core.common.errors.VdcBLLExcep= tion: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorEx= ception: VDSGenericException: VDSErrorException: Failed in vdscommand to Di= scoverSendTargetsVDS, error =3D Failed discovery of iSCSI targets: "portal= =3DIscsiPortal(hostname=3Du'10.147.60.90', port=3D3260), err=3D(21, [], ['i= scsiadm: No portals found'])" (Failed with error iSCSIDiscoveryError and co= de 475): org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLExcepti= on: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGeneric= Exception: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVD= S, error =3D Failed discovery of iSCSI targets: "portal=3DIscsiPortal(hostn= ame=3Du'10.147.60.90', port=3D3260), err=3D(21, [], ['iscsiadm: No portals = found'])" (Failed with error iSCSIDiscoveryError and code 475) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.= java:117) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VD= SBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.storage.DiscoverSendTargetsQuery.execu= teQueryCommand(DiscoverSendTargetsQuery.java:16) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(Quer= iesCommandBase.java:73) [bll.jar:] ... In order to check iSCSI discovering via another way, I run this command fro= m ovirt manager system command prompt : iscsiadm -m discovery -t st -p <iSCSI Server Address> I got a correct device lists. Thanks for help. J.P. Ribeauville P: +33.(0).1.47.17.20.49 . Puteaux 3 Etage 5 Bureau 4 jpribeauville(a)axway.com<mailto:jpribeauville@axway.com> http://www.axway.com<http://www.axway.com/> P Pensez =E0 l'environnement avant d'imprimer. --_000_1051EFB4D3A1704680C38CCAAC5836D2929DC082WPTXMAIL2ptxaxw_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"FR" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> Hi,<o:p></o:p> <o:p> </o:p> By using 3.5 ovirt , I’m = trying to add  a iSCSI storage domain to my datacenter.<o:p></o:p></sp= an> <o:p> </o:p> <o:p> </o:p> When clicking on discover butto= n , I  got following error :<o:p></o:p> <o:p> </o:p> No new devices were found. This may be due to either: incorrect multi= path configuration on the Host or wrong address of the iscsi target or a failure to authenticate on the target device. Please consult y= our Storage Administrator.<o:p></o:p> <o:p> </o:p>= I restart sanlock service on th= e host ( it’s a RHEL 7)  ; no positive effect.<o:p></o:p>= <o:p> </o:p> In engine.log  found this =  :<o:p></o:p> <o:p> </o:p> …<o:p></o:p> IQNListReturnForXmlRpc [mSta= tus=3DStatusForXmlRpc [mCode=3D475, mMessage=3DFailed discovery of iSCSI ta= rgets: "portal=3DIscsiPortal(hostname=3Du'10.147.60.90', port=3D3260),= err=3D(21, [], ['iscsiadm: No portals found'])"]]<o:p></o:p></= i> 2015-12-02 11:28:31,468 INFO=   [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCom= mand] (ajp-/127.0.0.1:8702-5) HostName =3D ldc01omv01<o:p></o:p>= 2015-12-02 11:28:31,468 ERRO= R [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCommand]= (ajp-/127.0.0.1:8702-5) Command DiscoverSendTargetsVDSCommand(HostName =3D= ldc01omv01, HostId =3D 09bb3024-170f-48a1-a78a-951a2c61c680, connection=3D{ id: null, connection: 10.147.60.90, iqn: null, vfsType: nul= l, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null }= ;) execution failed. Exception: VDSErrorException: VDSGenericException: VDS= ErrorException: Failed in vdscommand to DiscoverSendTargetsVDS, error =3D Failed discovery of iSCSI targets: &q= uot;portal=3DIscsiPortal(hostname=3Du'10.147.60.90', port=3D3260), err=3D(2= 1, [], ['iscsiadm: No portals found'])"<o:p></o:p> 2015-12-02 11:28:31,468 INFO=   [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCom= mand] (ajp-/127.0.0.1:8702-5) FINISH, DiscoverSendTargetsVDSCommand, log id= : 3023392e<o:p></o:p> 2015-12-02 11:28:31,468 ERRO= R [org.ovirt.engine.core.bll.storage.DiscoverSendTargetsQuery] (ajp-/127.0.= 0.1:8702-5) Query DiscoverSendTargetsQuery failed. Exception message is Vdc= BLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSe= ndTargetsVDS, error =3D Failed discovery of iSCSI targets: "portal=3DI= scsiPortal(hostname=3Du'10.147.60.90', port=3D3260), err=3D(21, [], ['iscsi= adm: No portals found'])" (Failed with error iSCSIDiscoveryError and code 475) : org.ovirt.engine.core.common.errors.VdcBLLException: VdcBL= LException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VD= SGenericException: VDSErrorException: Failed in vdscommand to DiscoverSendT= argetsVDS, error =3D Failed discovery of iSCSI targets: "portal=3DIscsiPortal(hostname=3Du'10.147.60.90', p= ort=3D3260), err=3D(21, [], ['iscsiadm: No portals found'])" (Failed w= ith error iSCSIDiscoveryError and code 475): org.ovirt.engine.core.common.e= rrors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vds= broker.VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSe= ndTargetsVDS, error =3D Failed discovery of iSCSI targets: "portal=3DI= scsiPortal(hostname=3Du'10.147.60.90', port=3D3260), err=3D(21, [], ['iscsi= adm: No portals found'])" (Failed with error iSCSIDiscoveryError and code 475)<o:p></o:p>     &nbs= p;   at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsH= andler.java:117) [bll.jar:]<o:p></o:p>     &nbs= p;   at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCom= mand(VDSBrokerFrontendImpl.java:33) [bll.jar:]<o:p></o:p>     &nbs= p;   at org.ovirt.engine.core.bll.storage.DiscoverSendTargetsQuer= y.executeQueryCommand(DiscoverSendTargetsQuery.java:16) [bll.jar:]<o:p></o:= p>     &nbs= p;   at org.ovirt.engine.core.bll.QueriesCommandBase.executeComma= nd(QueriesCommandBase.java:73) [bll.jar:]<o:p></o:p> <o:p> </o:p>= …<o:p></o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> In order to check iSCSI discove= ring via another way, I run this command from  ovirt manager system co= mmand prompt :<o:p></o:p> <o:p> </o:p>= iscsiadm -m discovery -t st = -p <iSCSI Server Address><o:p></o:p> <o:p> </o:p> I got  a correct  dev= ice lists.<o:p></o:p> <o:p> </o:p> Thanks for help.<o:p></o:p></sp= an> <o:p> </o:p> <o:p> </o:p> <table class=3D"MsoNormalTable" border=3D"0" cellspacing=3D"0" cellpadding= =3D"0"> <tbody> <tr> <td valign=3D"top" style=3D"padding:0cm 4.5pt 0cm 0cm"> <o:p> </o:p> J.P. Ribeauville<o:p></o:p> <o:p> </o:p> </td> </tr> <tr> <td style=3D"padding:2.25pt 4.5pt 4.5pt 0cm"> P: +33.(0).1.47.17.= 20.49<o:p></o:p></sp= an> .<o:= p></o:p> Pute= aux 3 Etage 5  Bureau 4<o:p></o:p> <o:p= > </o:p> <a href=3D"mailto:jpribeauville@axway.com">= jpribeauville(a)axway.com</a></= span> <a href=3D"http://www.axway.com/">http://www.ax= way.com</a><o:p></o:p> <o:p= > </o:p> </td> </tr> </tbody> </table> <o:p> </o:p> <table class=3D"MsoNormalTable" border=3D"0" cellspacing=3D"0" cellpadding= =3D"0"> <tbody> <tr> <td style=3D"padding:4.5pt 4.5pt 4.5pt 0cm"> P Pensez =E0 l’environnement avant d’i= mprimer.<o:p></o:p><= /span> </td> </tr> </tbody> </table> <o:p> <= /o:p> <o:p> </o:p> </div> </body> </html> --_000_1051EFB4D3A1704680C38CCAAC5836D2929DC082WPTXMAIL2ptxaxw_--

1 0

Updated Invitation: [Deep dive] Host Network QoS - oVirt 3.6 @ Thu Nov 26, 2015 5pm - 6pm (ibarkan@redhat.com)
by ibarkan＠redhat.com 01 Dec '15

01 Dec '15

This event has been changed. Title: [Deep dive] Host Network QoS - oVirt 3.6 Hangouts on air: https://plus.google.com/events/c3la9vdse911atq991qflogtq0g you tube link: https://plus.google.com/events/c3la9vdse911atq991qflogtq0g When: Thu Nov 26, 2015 5pm - 6pm Jerusalem (changed) Calendar: ibarkan(a)redhat.com Who: * ibarkan(a)redhat.com - organizer * users(a)ovirt.org Event details: https://www.google.com/calendar/event?action=VIEW&eid=NGZxZXU0dDRka2ZrMmd1c… Invitation from Google Calendar: https://www.google.com/calendar/ You are receiving this courtesy email at the account users(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://www.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to modify your RSVP response. Learn more at https://support.google.com/calendar/answer/37135#forwarding

3 2

hosted engine vm.conf missing
by Thomas Scofield 01 Dec '15

01 Dec '15

I have recently setup a ovirt hosted engine on iscsi storage and after a reboot of the system I am unable to start the hosted engine. The agent.log gives errors indicating there is a missing value in the vm.conf file, but the vm.conf file does not appear in the location indicated. There is no error indicated when the agent attempts to reload the vm.conf. Any ideas on how to get the hosted engine up and running? MainThread::INFO::2015-11-26 21:31:13,071::hosted_engine::699::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_sanlock) Ensuring lease for lockspace hosted-engine, host id 1 is acquired (file: /var/run/vdsm/storage/ddf4a26b-61ff-49a4-81db-9f82da35e44b/6ed6d868-aaf3-4b3f-bdf0-a4ad262709ae/1fe5b7fc-eae7-4f07-a2fe-5a082e14c876) MainThread::INFO::2015-11-26 21:31:13,072::upgrade::836::ovirt_hosted_engine_ha.lib.upgrade.StorageServer::(upgrade) Host configuration is already up-to-date MainThread::INFO::2015-11-26 21:31:13,072::hosted_engine::422::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Reloading vm.conf from the shared storage domain MainThread::ERROR::2015-11-26 21:31:13,100::agent::205::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Error: ''Configuration value not found: file=/var/run/ovirt-hosted-engine-ha/vm.conf, key=memSize'' - trying to restart agent MainThread::WARNING::2015-11-26 21:31:18,105::agent::208::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Restarting agent, attempt '9' MainThread::ERROR::2015-11-26 21:31:18,106::agent::210::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Too many errors occurred, giving up. Please review the log and consider filing a bug. MainThread::INFO::2015-11-26 21:31:18,106::agent::143::ovirt_hosted_engine_ha.agent.agent.Agent::(run) Agent shutting down

4 11

Power Management with python SDK
by Giulio Casella 01 Dec '15

01 Dec '15

Hi everybody, I'm trying to enable power management on a host using python, but I'm stuck. Previously (ovirt 3.5) I directly wrote power management parameters into PowerManagement structure (and everything was working fine), but starting from 3.6 this is not possible. This is what I do now: agent = params.Agent() agent.set_options(params.Options()) agent.set_type("ilo3") agent.set_username("admin") agent.set_password("mysecret") agent.set_address("172.20.20.1") agents=params.Agents() agents.add_agent(agent) pm=params.PowerManagement() pm.set_agents(agents) pm.set_enabled(True) myhost=api.hosts.get("myhost") myhost.set_power_management(pm) try: myhost.update() except Exception as e: print "Error: %s" % e and I get: Error: status: 400 reason: Bad Request detail: Cannot edit Host. Power Management is enabled for Host but no Agent type selected. If I dont't enable PM (pm.set_enabled line above) I get no error, but no agent is added. My software is: - ovirt-engine-3.6.0.3-1.el6 - ovirt-engine-sdk-python-3.6.0.3-1.el6 on a CentOS 6.6 distro. Any ideas? Thanks in advance, Giulio

2 2

Windows Networking Issues -
by Matt Wells 01 Dec '15

01 Dec '15

Hi all, I have a question about Windows VMs and a networking issue I'm having. Here's the setup - * oVirt - 3.5.1.1-1 * Hypervisors are CentOS 6.7 box with 2 NICs in bond0 'mode=4 miimon=100 lacp_rate=1' * On bond0 I have a few networks using vlan tagging. * Networks are 5,10,15,20 - All on an external switch Network 15 has a Windows 2012 R2 server and a CentOS 6.7 server on it. The rest of the networks have a few linux. Every linux box on every network is happy. However any and all Windows boxes I bring online are incapable of patching or hitting the web. I pointed the Windows box to the linux box next to it as a proxy (after installing squid on it) When I do that the Windows box has no issues at all; it's only when he's attempting to leave on his own. On my firewall I put in a 'permit any any' on the M$ box IP however all I see is tcp resets in PCAPs, I've been playing with for some time but can't seem to find the issue. It would be one thing if everything on the 15 was bad but the linux box on the network is fine. Here's the rub, I'm 99.999% sure this used to work. gggrrr... Any assistance anyone can offer would be amazingly appreciated. Thank you for taking the time to read this.

2 3

Re: [ovirt-users] [ANN] oVirt 3.6.1 First Release Candidate is now available for testing
by jvdwege 01 Dec '15

01 Dec '15

Sandro Bonazzola schreef op 2015-11-30 15:10: > On Mon, Nov 30, 2015 at 1:56 PM, Joop <jvdwege(a)xs4all.nl> wrote: > >> On 30-11-2015 13:06, Sandro Bonazzola wrote: >> >> On Sat, Nov 28, 2015 at 1:34 PM, Joop <jvdwege(a)xs4all.nl> wrote: >> On 25-11-2015 15:28, Sandro Bonazzola wrote: >>> The oVirt Project is pleased to announce the availability >>> of the First Release Candidate of oVirt 3.6.1 for testing, as of >>> November 25th, 2015. >>> >>> This release is available now for Fedora 22, >>> Red Hat Enterprise Linux 6.7, CentOS Linux 6.7 (or similar) and >>> Red Hat Enterprise Linux >= 7.1, CentOS Linux >= 7.1 (or similar). >>> >>> This release supports Hypervisor Hosts running >>> Red Hat Enterprise Linux >= 7.1, CentOS Linux >= 7.1 (or similar) >> and >>> Fedora 22. >>> Highly experimental support for Debian 8.1 Jessie has been added >> too. >>> >>> This release of oVirt 3.6.1 includes numerous bug fixes. >>> See the release notes [1] for an initial list of the new features >> and bugs >>> fixed. >>> >> Tried the 3.6.1 prerelease but the sanlock error 22 is still there >> and >> its not possible to activate the imported hosted-engine storage >> domain. >> Host F22, hosted-engine CentOS7.1, storage domain(s) NFS. >> >> Sanlock error 22 shows up because BZ 1269768 hasn't been fixed yet. >> >> But if you don't import the hosted engine storage everything else >> should still work fine. > Ah, but that won't work for my use case since I need to import an > existing data domain and that won't work without a working data > domain. > Will see if creating a dummy small data domain will let me import the > real one. > > it should, let me know if it didn't work. Thanks that worked :-) > Adding Simone and Roy so they have a better sight on why people are > keep trying to import the hosted engine domain despite it's not fixed > yet :-) Sorry being pushy just wanted to get on with my ovirt stuff and felt a little frustrated that such a basic feature didn't work (IMHO). Again apologies, you're all working hard to get things fixed and I shouldn't complain. Regards, Joop

6 6

[ANN] oVirt 3.5 won't receive further updates
by Sandro Bonazzola 01 Dec '15

01 Dec '15

Hi, due to the release of recent 3.6.0 major release of the oVirt project, and upcoming release of its first maintenance release 3.6.1, the last 3.5 release is 3.5.6 we released today. We recommend anyone hitting issued existing in 3.5 to upgrade to 3.6 to get the fixes since 3.5 won't receive further updates. Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[ANN] oVirt 3.5.6 Final Release is now available
by Sandro Bonazzola 01 Dec '15

01 Dec '15

The oVirt Project is pleased to announce the availability of the oVirt 3.5.6 Final Release as of December 1st, 2015. This release is available now for Red Hat Enterprise Linux 6.7, CentOS Linux 6.7 (or similar) and Red Hat Enterprise Linux 7.1, CentOS Linux 7.1 (or similar). This release supports Hypervisor Hosts running Red Hat Enterprise Linux 6.7, CentOS Linux 6.7 (or similar) and Red Hat Enterprise Linux 7.1, CentOS Linux 7.1 (or similar). This release includes updated packages for: - ovirt-engine - ovirt-hosted-engine-ha - vdsm - ovirt-engine-sdk-python - ovirt-engine-sdk-java - ovirt-engine-cli - qemu-kvm-ev - gperftools - ipxe - libunwind - OVMF - qemu-guest-agent - seabios - sgabios - ovirt-guest-tools See the release notes [1] for a list of fixed bugs. Please refer to release notes [1] for Installation / Upgrade instructions. a new oVirt Live ISO is already available[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.5.6_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live/el6-3.5.6/ [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Windows 10
by Koen Vanoppen 01 Dec '15

01 Dec '15

Dear all, Yes, onther question :-). This time it's about windows 10. I'm running ovirt 3.5.4 and I don't manage to install windows 10 on it. Keeps giving me a blue screen (yes, I know, it's still a windows... ;-) ) on reboot. Are there any special settings you need to enable when creating the vm? Which OS do I need to select? Or shall I just wait untile the relase of ovirt 3.6 :-) ? Kind regards, Koen

4 5

Corruped disks
by Koen Vanoppen 30 Nov '15

30 Nov '15

Dear all, lately we are experience some strange behaviour on our vms... Every now and then we have disks that went corrupt. Is there a chance that ovirt is the issue here or...? It happens (luckily) on our DEV/UAT cluster. Since the last 4 weeks, we already had 6 vm's that went totaly corrupt... Kind regards, Koen

3 3

Re: [ovirt-users] Engine upgrade error - 03_06_1670_unique_vds_id_network_name_vds_interface.sql
by Yedidyah Bar David 30 Nov '15

30 Nov '15

On Mon, Nov 30, 2015 at 3:34 PM, Frank Rothenstein <f.rothenstein(a)bodden-kliniken.de> wrote: > Hello, > > I tried several times to upgrade my ovirt-engine 3.5.5 to 3.6. Every > time the setup stops at updating the DB-schema. The log revealed when > this happpens: The setup ist complaining about a duplicated key - here > is the part of the log. Of course there is only one network in the > interface. > > Can anybody help me getting a solution? > > Thnaks, Frank > > Running upgrade sql script '/usr/share/ovirt- > engine/dbscripts/upgrade/03_06_1670_unique_vds_id_network_name_vds_inte > rface.sql'... > 2542964- > 2542965-2015-11-30 08:15:26 DEBUG > otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema > plugin.execute:941 execute-output: ['/usr/share/ovirt- > engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', > 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt- > engine-setup-20151130073216-erdh9f.log', '-c', 'apply'] stderr: > 2543300-psql:/usr/share/ovirt- > engine/dbscripts/upgrade/03_06_1670_unique_vds_id_network_name_vds_inte > rface.sql:1: ERROR: could not create unique index > "vds_interface_vds_id_network_name_unique" > 2543487:DETAIL: Key (vds_id, network_name)=(ba954f0f-6ecb-4ec8-b169- > 7e0a1147b4cd, KHnetz) is duplicated. > 2543585-CONTEXT: SQL statement "ALTER TABLE vds_interface ADD > CONSTRAINT vds_interface_vds_id_network_name_unique unique (vds_id, > network_name)" > 2543723-PL/pgSQL function fn_db_create_constraint(character > varying,character varying,text) line 4 at EXECUTE statement > 2543835-FATAL: Cannot execute sql command: --file=/usr/share/ovirt- > engine/dbscripts/upgrade/03_06_1670_unique_vds_id_network_name_vds_inte > rface.sql Can you post output of 'select * from vds_interface' from engine database? Adding Eli and changing subject. > 2543975- > 2543976-2015-11-30 08:15:26 DEBUG otopi.context > context._executeMethod:156 method exception > 2544060-Traceback (most recent call last): > 2544095- File "/usr/lib/python2.7/site-packages/otopi/context.py", > line 146, in _executeMethod > 2544183- method['method']() > 2544206- File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt- > engine-setup/ovirt-engine/db/schema.py", line 291, in _misc > 2544325- oenginecons.EngineDBEnv.PGPASS_FILE > 2544365- File "/usr/lib/python2.7/site-packages/otopi/plugin.py", line > 946, in execute > 2544445- command=args[0], > 2544466-RuntimeError: Command '/usr/share/ovirt- > engine/dbscripts/schema.sh' failed to execute > 2544552-2015-11-30 08:15:26 ERROR otopi.context > context._executeMethod:165 Failed to execute stage 'Misc > configuration': Command '/usr/share/ovirt-engine/dbscripts/schema.sh' > failed to execute > 2544737-2015-11-30 08:15:26 DEBUG otopi.transaction > transaction.abort:134 aborting 'Yum Transaction' > 2544830-2015-11-30 08:15:26 INFO > otopi.plugins.otopi.packagers.yumpackager yumpackager.info:95 Yum > Performing yum transaction rollback > > > > > > ______________________________________________________________________________ > BODDEN-KLINIKEN Ribnitz-Damgarten GmbH > Sandhufe 2 > 18311 Ribnitz-Damgarten > > Telefon: 03821-700-0 > Fax: 03821-700-240 > > E-Mail: info(a)bodden-kliniken.de Internet: http://www.bodden-kliniken.de > > Sitz: Ribnitz-Damgarten, Amtsgericht: Stralsund, HRB 2919, Steuer-Nr.: 079/133/40188 > Aufsichtsratsvorsitzende: Carmen Schröter, Geschäftsführer: Dr. Falko Milski > > Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorge- > sehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, beachten Sie bitte, dass jede Form der Veröf- > fentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail unzulässig ist. Wir bitten Sie, sofort den > Absender zu informieren und die E-Mail zu löschen. > > > Bodden-Kliniken Ribnitz-Damgarten GmbH 2015 > *** Virenfrei durch Kerio Mail Server und Sophos Antivirus *** > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -- Didi

1 0

Re: [ovirt-users] [SOLVED] Re: Trying to make ovirt-hosted-engine-setup create a customized Engine-vm on 3.6 HC HE
by Giuseppe Ragusa 30 Nov '15

30 Nov '15

On Wed, Nov 25, 2015, at 12:10, Simone Tiraboschi wrote: > > > On Mon, Nov 23, 2015 at 10:17 PM, Giuseppe Ragusa > <giuseppe.ragusa(a)hotmail.com> wrote: >> On Tue, Oct 27, 2015, at 00:10, Giuseppe Ragusa wrote: >> > On Mon, Oct 26, 2015, at 09:48, Simone Tiraboschi wrote: >> > > >> > > >> > > On Mon, Oct 26, 2015 at 12:14 AM, Giuseppe Ragusa > > <giuseppe.ragusa(a)hotmail.com> wrote: >> > >> Hi all, >> > >> I'm experiencing some difficulties using oVirt 3.6 latest snapshot. >> > >> >> > >> I'm trying to trick the self-hosted-engine setup to create a custom > >> engine vm with 3 nics (with fixed MACs/UUIDs). >> > >> >> > >> The GlusterFS volume (3.7.5 hyperconverged, replica 3, for the > >> engine vm) and the network bridges (ovirtmgmt and other two > >> bridges, called nfs and lan, for the engine vm) have been > >> preconfigured on the initial fully-patched CentOS 7.1 host (plus > >> other two identical hosts which are awaiting to be added). >> > >> >> > >> I'm stuck at a point with the engine vm successfully starting but > >> with only one nic present (connected to the ovirtmgmt bridge). >> > >> >> > >> I'm trying to obtain the modified engine vm by means of a trick > >> which used to work in a previous (aborted because of lacking GlusterFS-by- > >> libgfapi support) oVirt 3.5 test setup (about a year ago, maybe > >> more): I'm substituting the standard /usr/share/ovirt-hosted-engine- > >> setup/templates/vm.conf.in with the following: >> > >> >> > >> vmId=@VM_UUID@ >> > >> memSize=@MEM_SIZE@ >> > >> display=@CONSOLE_TYPE@ >> > >> devices={index:2,iface:ide,address:{ controller:0, target:0,unit:0, > >> bus:1, type:drive},specParams:{},readonly:true,deviceId:@CDROM_UUI- > >> D@,path:@CDROM@,device:cdrom,shared:false,type:disk@BOOT_CDROM@} >> > >> devices={index:0,iface:virtio,format:raw,poolID:@SP_UUID@,volumeID- > >> :@VOL_UUID@,imageID:@IMG_UUID@,specParams:{},readonly:false,domain- > >> ID:@SD_UUID@,optional:false,deviceId:@IMG_UUID@,address:{bus:0x00, > >> slot:0x06, domain:0x0000, type:pci, function:0x0},device:disk,shar- > >> ed:exclusive,propagateErrors:off,type:disk@BOOT_DISK@} >> > >> devices={device:scsi,model:virtio-scsi,type:controller} >> > >> devices={index:4,nicModel:pv,macAddr:02:50:56:3f:c4:b0,linkActive:- > >> true,network:@BRIDGE@,filter:vdsm-no-mac- > >> spoofing,specParams:{},deviceId:@NIC_UUID@,address:{bus:0x00, > >> slot:0x03, domain:0x0000, type:pci, > >> function:0x0},device:bridge,type:interface@BOOT_PXE@} >> > >> devices={index:8,nicModel:pv,macAddr:02:50:56:3f:c4:a0,linkActive:- > >> true,network:lan,filter:vdsm-no-mac- > >> spoofing,specParams:{},deviceId:6c467650-1837-47ea-89bc- > >> 1113f4bfefee,address:{bus:0x00, slot:0x09, domain:0x0000, type:pci, > >> function:0x0},device:bridge,type:interface@BOOT_PXE@} >> > >> devices={index:16,nicModel:pv,macAddr:02:50:56:3f:c4:c0,linkActive- > >> :true,network:nfs,filter:vdsm-no-mac- > >> spoofing,specParams:{},deviceId:4d8e0705-8cb4-45b7-b960- > >> 7f98bb59858d,address:{bus:0x00, slot:0x0c, domain:0x0000, type:pci, > >> function:0x0},device:bridge,type:interface@BOOT_PXE@} >> > >> devices={device:console,specParams:{},type:console,deviceId:@CONSO- > >> LE_UUID@,alias:console0} >> > >> vmName=@NAME@ >> > >> spiceSecureChannels=smain,sdisplay,sinputs,scursor,splayback,sreco- > >> rd,ssmartcard,susbredir >> > >> smp=@VCPUS@ >> > >> cpuType=@CPU_TYPE@ >> > >> emulatedMachine=@EMULATED_MACHINE@ >> > >> >> > >> but unfortunately the vm gets created like this (output from "ps"; > >> note that I'm attaching a CentOS7.1 Netinstall ISO with an embedded > >> kickstart: the installation should proceed by HTTP on the lan > >> network but obviously fails): >> > >> >> > >> /usr/libexec/qemu-kvm -name HostedEngine -S -machine >> > >> pc-i440fx-rhel7.1.0,accel=kvm,usb=off -cpu Westmere -m 4096 - > >> realtime mlock=off >> > >> -smp 2,sockets=2,cores=1,threads=1 -uuid f49da721-8aa6-4422-8b91- > >> e91a0e38aa4a -s >> > >> mbios type=1,manufacturer=oVirt,product=oVirt Node,version=7- > >> 1.1503.el7.centos.2 >> > >> .8,serial=2a1855a9-18fb-4d7a-b8b8-6fc898a8e827,uuid=f49da721-8aa6- > >> 4422-8b91-e91a >> > >> 0e38aa4a -no-user-config -nodefaults -chardev > >> socket,id=charmonitor,path=/var/li >> > >> b/libvirt/qemu/HostedEngine.monitor,server,nowait -mon > >> chardev=charmonitor,id=mo >> > >> nitor,mode=control -rtc base=2015-10-25T11:22:22,driftfix=slew - > >> global kvm-pit.l >> > >> ost_tick_policy=discard -no-hpet -no-reboot -boot strict=on -device > >> piix3-usb-uh >> > >> ci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-scsi- > >> pci,id=scsi0,bus=pci.0,addr >> > >> =0x4 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 > >> =-drive file= >> > >> /var/tmp/engine.iso,if=none,id=drive-ide0-1- > >> 0,readonly=on,format=raw,serial= -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1- > >> 0,bootindex=1 -drive file=/var/run/vdsm/storage/be4434bf-a5fd-44d7-8011- > >> d5e4ac9cf523/b3abc1cb-8a78-4b56-a9b0-e5f41fea0fdc/8d075a8d-730a- > >> 4925-8779-e0ca2b3dbcf4,if=none,id=drive-virtio- > >> disk0,format=raw,serial=b3abc1cb-8a78-4b56-a9b0- > >> e5f41fea0fdc,cache=none,werror=stop,rerror=stop,aio=threads -device > >> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio- > >> disk0,id=virtio-disk0 -netdev > >> tap,fd=26,id=hostnet0,vhost=on,vhostfd=27 -device virtio-net- > >> pci,netdev=hostnet0,id=net0,mac=02:50:56:3f:c4:b0,bus=pci.0,addr=0- > >> x3 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/chan- > >> nels/f49da721-8aa6-4422-8b91- > >> e91a0e38aa4a.com.redhat.rhevm.vdsm,server,nowait -device virtserialport,bus=virtio- > >> serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rh- > >> evm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qem- > >> u/channels/f49da721-8aa6-4422-8b91- > >> e91a0e38aa4a.org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio- > >> serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.gues- > >> t_agent.0 -chardev socket,id=charchannel2,path=/var/lib/libvirt/qe- > >> mu/channels/f49da721-8aa6-4422-8b91-e91a0e38aa4a.org.ovirt.hosted- > >> engine-setup.0,server,nowait -device virtserialport,bus=virtio- > >> serial0.0,nr=3,chardev=charchannel2,id=channel2,name=org.ovirt.hos- > >> ted-engine-setup.0 -chardev socket,id=charconsole0,path=/var/run/ovirt-vmconsole- > >> console/f49da721-8aa6-4422-8b91-e91a0e38aa4a.sock,server,nowait - > >> device virtconsole,chardev=charconsole0,id=console0 -vnc > >> 0:0,password -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -msg > >> timestamp=on >> > >> >> > >> There seem to be no errors in the logs. >> > >> >> > >> I've tried reading some (limited) Python setup code but I've not > >> found any obvious reason why the trick should not work anymore. >> > >> >> > >> I know that 3.6 has different network configuration/management and > >> this could be the hot point. >> > >> >> > >> Does anyone have any further suggestion or clue (code/logs to > >> read)? >> > > >> > > The VM creation path is now a bit different cause we use just vdscli > > library instead of vdsClient. >> > > Please take a a look at mixins.py >> > >> > Many thanks for your very valuable hint: >> > >> > I've restored the original /usr/share/ovirt-hosted-engine- > setup/templates/vm.conf.in and I've managed to obtain the 3-nics- > customized vm by modifying /usr/lib/python2.7/site- > packages/ovirt_hosted_engine_setup/mixins.py like this ("diff -Naur" > output): >> >> Hi Simone, >> it seems that I spoke too soon :( >> >> A separate network issue (already reported to the list) prevented me from successfully closing up the setup in its final phase (registering the host inside the Engine), so all seemed well while being stuck there :) >> >> Now that I've solved that (for which I'm informing the list asap in a separate message) and the setup ended successfully, it seems that the last step of the HE setup (shutdown the Engine vm to place it under HA agent control) starts/creates a "different vm" and my virtual hardware customizations seem to be gone (only one NIC present, connected to ovirtmgmt). >> >> My wild guess: maybe I need BOTH the mixins.py AND the vm.conf.in customizations? ;) > > Yes, you are right: the final configuration is still generated from > the template so you need to fix both. > >> >> It seems (from /etc/ovirt-hosted-engine/hosted-engine.conf) that the Engine vm definition is now in /var/run/ovirt-hosted-engine-ha/vm.conf >> > > > the vm configuration is now read from the shared domain converting > back from the OVF_STORE, the idea is to let you edit it from the > engine without the need to write it on each host. /var/run/ovirt-hosted-engine- > ha/vm.conf is just a temporary copy. > > As you are probably still not able to import the hosted-engine storage > domain in the engine due to a well know bug, your system will fallback > to the initial vm.conf configuration still on the shared storage and > you can manually fix it: Please follow this procedure substituting > '192.168.1.115:_Virtual_ext35u36' with the mount point of hosted- > engine storage domain on your system: > > mntpoint=/rhev/data-center/mnt/192.168.1.115:_Virtual_ext35u36 > dir=`mktemp -d` && cd $dir sdUUID_line=$(grep sdUUID /etc/ovirt-hosted-engine/hosted- > engine.conf) sdUUID=${sdUUID_line:7:36} conf_volume_UUID_line=$(grep > conf_volume_UUID /etc/ovirt-hosted-engine/hosted-engine.conf) > conf_volume_UUID=${conf_volume_UUID_line:17:36} > conf_image_UUID_line=$(grep conf_image_UUID /etc/ovirt-hosted-engine/hosted- > engine.conf) conf_image_UUID=${conf_image_UUID_line:16:36} dd > if=$mntpoint/$sdUUID/images/$conf_image_UUID/$conf_volume_UUID > 2>/dev/null| tar -xvf - > # directly edit vm.conf as you need > tar -cO * | dd > of=$mntpoint/$sdUUID/images/$conf_image_UUID/$conf_volume_UUID > > When your engine will import the hosted-engine storage domain it will > generate an OVF_STORE with the configuration of the engine VM, you > will be able to edit some parameters from the engine and the agent > will read the VM configuration from there. Hi Simone, I followed your advice and modified the vm.conf inside the conf_volume tar archive. Then I put the system (still with only one physical host) in global maintenance from the host: hosted-engine --set-maintenance --mode=global Then i regularly powered off the Engine vm and confirmed it from the host: hosted-engine --vm-status Then restarted it from the host: hosted-engine --vm-start Finally, I exited maintenance from the host: hosted-engine --set-maintenance --mode=none Waited a bit and verified it: hosted-engine --vm-status It all worked as expected! Many thanks again. Regards, Giuseppe > >> >> Many thanks for your assistance (and obviously I just sent a related wishlist item on the HE setup ;) >> >> Regards, >> Giuseppe >> >> >> > *********************************************************************- > *************** >> > >> > --- mixins.py.orig 2015-10-20 16:57:40.000000000 +0200 >> > +++ mixins.py 2015-10-26 22:22:58.351223922 +0100 >> > @@ -25,6 +25,7 @@ >> >import random >> >import string >> >import time >> > +import uuid >> > >> > >> >from ovirt_hosted_engine_setup import constants as ohostedcons >> > @@ -247,6 +248,44 @@ >> >]['@BOOT_PXE@'] == ',bootOrder:1': >> >nic['bootOrder'] = '1' >> >conf['devices'].append(nic) >> > + nic2 = { >> > + 'nicModel': 'pv', >> > + 'macAddr': '02:50:56:3f:c4:a0', >> > + 'linkActive': 'true', >> > + 'network': 'lan', >> > + 'filter': 'vdsm-no-mac-spoofing', >> > + 'specParams': {}, >> > + 'deviceId': str(uuid.uuid4()), >> > + 'address': { >> > + 'bus': '0x00', >> > + 'slot': '0x09', >> > + 'domain': '0x0000', >> > + 'type': 'pci', >> > + 'function': '0x0' >> > + }, >> > + 'device': 'bridge', >> > + 'type': 'interface', >> > + } >> > + conf['devices'].append(nic2) >> > + nic3 = { >> > + 'nicModel': 'pv', >> > + 'macAddr': '02:50:56:3f:c4:c0', >> > + 'linkActive': 'true', >> > + 'network': 'nfs', >> > + 'filter': 'vdsm-no-mac-spoofing', >> > + 'specParams': {}, >> > + 'deviceId': str(uuid.uuid4()), >> > + 'address': { >> > + 'bus': '0x00', >> > + 'slot': '0x0c', >> > + 'domain': '0x0000', >> > + 'type': 'pci', >> > + 'function': '0x0' >> > + }, >> > + 'device': 'bridge', >> > + 'type': 'interface', >> > + } >> > + conf['devices'].append(nic3) >> > >> >cli = self.environment[ohostedcons.VDSMEnv.VDS_CLI] >> >status = cli.create(conf) >> > >> > *********************************************************************- > *************** >> > >> > Obviously this is a horrible ad-hoc hack that I'm not able to generalize/clean- > up now: doing so would involve (apart from a deeper understanding of > the whole setup code/workflow) some well-thought-out design decisions > and, given the effective deprecation of the aforementioned easy-to- > modify vm.conf.in template substituted by hardwired Python program > logic, it seems that such a functionality is not very high on the > development priority list atm ;) >> > >> > Many thanks again! >> > >> > Kind regards, >> > Giuseppe >> > >> > >> Many thanks in advance. >> > >> >> > >> Kind regards, >> > >> Giuseppe >> > >> >> > >> PS: please keep also my address in replying because I'm > >> experiencing some problems between Hotmail and oVirt-mailing- > >> list >> > >> >> > >> _______________________________________________ >> > >> >> > Users mailing list >> > >>Users(a)ovirt.org >> > >>http://lists.ovirt.org/mailman/listinfo/users >> > >>

1 0

Issue with kernel 2.6.32-573.3.1.el6.x86_64?
by Michael Kleinpaste 30 Nov '15

30 Nov '15

So I patched my vhosts and updated the kernel to 2.6.32-573.3.1.el6.x86_64. Afterwards the networking became unstable for my vyatta firewall vm. Lots of packet loss and out of order packets (based on my tshark at the time). Has anybody else experienced this? -- *Michael Kleinpaste* Senior Systems Administrator SharperLending, LLC. www.SharperLending.com Michael.Kleinpaste(a)SharperLending.com (509) 324-1230 Fax: (509) 324-1234

4 7

oVirt 4.0 wishlist: oVirt Engine
by Giuseppe Ragusa 30 Nov '15

30 Nov '15

Hi all, I go on with my wishlist, derived from both solitary mumblings and community talks at the the first Italian oVirt Meetup. I offer to help in coding (work/family schedules permitting) but keep in mind that I'm a sysadmin with mainly C and bash-scripting skills (but hoping to improve my less-than-newbie Python too...) I've sent separate wishlist messages for oVirt Node and VDSM. oVirt Engine: *) add Samba/CTDB/Ganesha capabilities (maybe in the GlusterFS management UI); there are related wishlist items on configuring/managing Samba/CTDB/Ganesha on oVirt Node and on VDSM *) add the ability to manage containers (maybe initially as an exclusive cluster type but allowing it to coexist with GlusterFS); there are related wishlist items on supporting containers on the oVirt Node and on VDSM *) add Open vSwitch direct support (not Neutron-mediated); there are related wishlist items on configuring/managing Open vSwitch on oVirt Node and on VDSM *) add DRBD9 as a supported Storage Domain type, HC/HE too, managed from the Engine UI similarly to GlusterFS; there are related wishlist items on configuring/managing DRBD9 on oVirt Node and on VDSM *) add support for managing/limiting GlusterFS heal/rebalance bandwidth usage in HC setup [1]; this is actually a GlusterFS wishlist item first and foremost, but I hope our use case could be considered compelling enough to "force their hand" a bit ;) Regards, Giuseppe [1] bandwidth limiting seems to be supported only for geo-replication on GlusterFS side; it is my understanding that on non-HC setups the heal/rebalance traffic could be kept separate from hypervisor/client traffic (if a separate, Gluster-only, network is physically available and Gluster cluster nodes have been peer-probed on those network addresses)

1 1

Re: [ovirt-users] Strange permissions on Hosted Engine HA Agent log files
by Giuseppe Ragusa 30 Nov '15

30 Nov '15

On Fri, Nov 27, 2015, at 18:15, Simone Tiraboschi wrote: > > > On Wed, Nov 25, 2015 at 11:53 PM, Giuseppe Ragusa <giuseppe.ragusa(a)hotmail.com> wrote: >> Hi all, >> I'm installing oVirt (3.6) in self-hosted mode, hyperconverged with GlusterFS (3.7.6). >> >> I'm using the oVirt snapshot generated the night between the 18th and 19th of November, 2015. >> >> The (single, at the moment) host and the Engine are both CentOS 7.1 fully up-to-date. >> >> After ovirt-hosted-engine-setup successful completion, I found the following (about 3 days after setup completed) "anomalies": >> >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/agent.log >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-23 >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/broker.log >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-23 >> >> The listing above comes from a custom security checking script that gives: >> >> "octal permissions" "number of links" "owner" "group" - "absolute pathname" >> >> Is the ominous "666" mark actually intended/necessary? ;-) > > Thanks for the report Giuseppe, I double checked on one of my test systems. > > [root@c71het20151028 ~]# ls -l /var/log/ovirt-hosted-engine-ha/* > -rw-r--r--. 1 root root 10136 Nov 27 18:08 /var/log/ovirt-hosted-engine-ha/agent.log > -rw-r--r--. 1 root root 1769029 Oct 29 17:20 /var/log/ovirt-hosted-engine-ha/agent.log.2015-10-28 > -rw-rw-rw-. 1 vdsm kvm 97685 Oct 29 18:21 /var/log/ovirt-hosted-engine-ha/agent.log.2015-10-29 > -rw-r--r--. 1 root root 3620102 Nov 25 12:09 /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-24 > -rw-rw-rw-. 1 vdsm kvm 715086 Nov 25 17:01 /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-25 > -rw-r--r--. 1 root root 13904 Nov 27 18:09 /var/log/ovirt-hosted-engine-ha/broker.log > -rw-r--r--. 1 root root 9711872 Oct 29 17:20 /var/log/ovirt-hosted-engine-ha/broker.log.2015-10-28 > -rw-rw-rw-. 1 vdsm kvm 468475 Oct 29 18:21 /var/log/ovirt-hosted-engine-ha/broker.log.2015-10-29 > -rw-r--r--. 1 root root 14066693 Nov 25 12:09 /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-24 > -rw-rw-rw-. 1 vdsm kvm 4505277 Nov 25 17:01 /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-25 > > > So I've something 644 root:root and something at 666 vdsm:kvm depending from the rotation date (???). > The directory is 700 vdsm:kvm so it's not really an issue but I think it's still worth to open a bug on that. Many thanks Simone for your confirmation: bug opened https://bugzilla.redhat.com/show_bug.cgi?id=1286568 Regards, Giuseppe >> Do I need to open a bugzilla notification for this? >> Many thanks in advance for your attention. >> >> Regards, >> Giuseppe >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users

1 0

ovirt-engine-sdk-python too slow
by John Hunter 30 Nov '15

30 Nov '15

Hi guys, I am using the ovirt-engine-sdk-python to communicate with the ovirt-engine, I am ok to list the vms but the processing time is too long, like 4.5 seconds, and this line: from ovirtsdk.api import API take almost 3 seconds. This seems a little bit longer than I expected it to be, so I am asking is there a quicker way to communicate with the ovirt-engine? -- Best regards Junwang Zhao Department of Computer Science &Technology Peking University Beijing, 100871, PRC

4 14

Install ovirt locally
by John Hunter 30 Nov '15

30 Nov '15

Hi all, Here is my situation: in my office, we can not access the website out of China, I have to grab my PC home to install the ovirt environment, this makes me sad. Can I download all the packages needed by ovirt at home, store them in my U-disk, and back to office and install the enviroment? I am worry about the package dependency. Does anybody who has done this or does anybody has a better solution for this? Any help would be appreciated :) -- Best regards Junwang Zhao Department of Computer Science &Technology Peking University Beijing, 100871, PRC

3 4

live snapshot merging
by Koen Vanoppen 30 Nov '15

30 Nov '15

Dear Community, Are there plans for live merging of snapshots? I know it is supported from libvirt 1.2.10. Kind regards, Koen

5 8

Networking fails for VM running on Centos6.7.Works on Centos6.5
by mad Engineer 29 Nov '15

29 Nov '15

hello all i am having strange network issue with vms that are running on centos 6.7 ovirt nodes. I recently added one more ovirt node which is running centos6.7 and upgraded from centos6.5 to centos6.7 on all other nodes. All VMs running on nodes with centos6.7 as host Operating system fail to reach network gateway,but if i reboot that same host to centos6.5 kernel everything works fine(with out changing any network configuration). Initially i thought it as configuration issue but its there on all nodes.if i reboot to old kernel everything is working. I am aware about ghost vlan0 issue in centos6.6 kernel.Not aware about any issue in centos6.7 Also all my servers are up to date. All physical interfaces are in access mode VLAN connected to nexus 5k switches. working kernel- 2.6.32-431.20.3.el6.x86_64 non working kernel- 2.6.32-573.8.1.el6.x86_64 Any idea?

3 3

Random VMs stuck in [drm] fb: depth 24,pitch 4096
by kevin parrikar 29 Nov '15

29 Nov '15

Running centos 6.7 and trying to PXE boot centos 6.5 vms but some of them are stuck with this in boot message: [drm] fb: depth 24,pitch 4096 screenshot of vm console: http://snag.gy/7Bhyc.jpg tried restarting vms but its still stuck there rpm -qa |grep kvm qemu-kvm-rhev-tools-0.12.1.2-2.479.el6_7.2.x86_64 qemu-kvm-rhev-0.12.1.2-2.479.el6_7.2.x86_64 rpm -qa |grep seabio seabios-0.6.1.2-30.el6.x86_64 uname -a 2.6.32-431.el6.x86_64 ever seen this behaviour? vms have 8gb/4cpu

1 0

3.6 vm from template with cloud-init. Not able to confirm OK button
by Gianluca Cecchi 29 Nov '15

29 Nov '15

Hello, I have created a template based on a CentOS 7.1 VM where I installed cloud-init. Now I'm trying to create a VM from that template using cloud-init and changing hostname and network parameters. It seems that in "Initial Run" section there is something wrong because if I press OK it doesn't happen anything but a sort of dotted square around the ok button, but I'm not able to see what is the thing that is not ok and correct it..... Can I debug anywhere? BTW: if I succeed in this preliminar test I would like to create a vm pool from this same template where, for every started VM in the pool (stateless is ok for them), a new hostname and a preconfigured static ip is set (I have not and I can't set up a dhcp server on that network). Is something configurable in vm pool with cloud init? Thanks Gianluca

1 1