- Users - oVirt List Archives

raw partition or LV access for migrated guests
by David Mansfield 23 Jan '15

23 Jan '15

Hi, I'm new to oVirt and I'm trying to investigate the feasibility of migrating four (or more) centos 6 libvirt+qemu+kvm hosts into a new (not yet created) oVirt environment. In general, most of the guests are running off of disk images in /var/lib/libvirt/images and from what I can tell there would be a fairly straightforward migration path for these (I've read briefly about virt-v2v and it looks promising). However, we have a few DB server guests which, for performance reasons, have direct access to host partitions (NOT lv, but actual host partitions). There are also a few machines which use a mapped LV as a virtual disk. Is this supported in oVirt? Is there a migration path for these? -- Thanks, David Mansfield Cobite, INC.

1 0

oVirt 3.5.1 ; No Network Access on hosted engine vm
by Mikola Rose 23 Jan '15

23 Jan '15

Hi again.... I think I may have selected the wrong interface during the hosted-engine deploy routine. My VM doe not have network access. The interface is connected and setup within the VM just no network access. Is there a way I can change the bridge interface? Mik

2 1

Testing 2560x1200 from tablet and Opaque
by Gianluca Cecchi 22 Jan '15

22 Jan '15

Hello, I have a CentOS 7 VM on oVirt 3.5 configured as desktop. What is the maximum display size it can get by default without particular customizations? In my case I'm testing from a 12.1" android tablet connected over wifi+openvpn and Opaque app. In Opaque I have a setting called Sync remote to display resolution My tablet resolution is 2560x1600 (btw I don't know if I can change it in Android scaling to any other resolution....) If I mark the setting above it seems it crashes If I deactivate it, I get a small window in upper left corner. I can change VM resolution up to 1920 and I get a bigger window, but I cannot go full screen for example... Anu advise at oVirt side to configure a bigger display size available? My VM has both oVirt Guest agent and spice vdagent installed ad active. Thanks in advance, Gianluca

1 1

REST exception building from master
by Lior Vernia 22 Jan '15

22 Jan '15

Hello, Building from master (i.e. towards 3.6), trying to use REST produces some exceptions - anyone has any clue as to why? Attaching the response (stack trace); this is to a GET operation on /api. Yours, Lior. <html><head><title>JBoss Web/7.0.0.SNAPSHOT - Error report</title><style></style> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade="noshade">type Exception reportmessage description The server encountered an internal error () that prevented it from fulfilling this request.exception <pre>javax.servlet.ServletException: Servlet.init() for servlet org.ovirt.engine.api.restapi.BackendApplication threw exception org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) java.lang.Thread.run(Thread.java:724) </pre>root cause <pre>java.lang.RuntimeException: java.lang.RuntimeException: Unable to instantiate MessageBodyReader org.jboss.resteasy.plugins.providers.RegisterBuiltin.register(RegisterBuiltin.java:35) org.jboss.resteasy.spi.ResteasyDeployment.start(ResteasyDeployment.java:211) org.jboss.resteasy.plugins.server.servlet.ServletContainerDispatcher.init(ServletContainerDispatcher.java:67) org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.init(HttpServletDispatcher.java:36) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) java.lang.Thread.run(Thread.java:724) </pre>root cause <pre>java.lang.RuntimeException: Unable to instantiate MessageBodyReader org.jboss.resteasy.spi.ResteasyProviderFactory.registerProvider(ResteasyProviderFactory.java:761) org.jboss.resteasy.plugins.providers.RegisterBuiltin.registerProviders(RegisterBuiltin.java:70) org.jboss.resteasy.plugins.providers.RegisterBuiltin.register(RegisterBuiltin.java:31) org.jboss.resteasy.spi.ResteasyDeployment.start(ResteasyDeployment.java:211) org.jboss.resteasy.plugins.server.servlet.ServletContainerDispatcher.init(ServletContainerDispatcher.java:67) org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.init(HttpServletDispatcher.java:36) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) java.lang.Thread.run(Thread.java:724) </pre>root cause <pre>java.lang.RuntimeException: Failed to construct public org.ovirt.engine.api.json.JSONProvider() org.jboss.resteasy.core.ConstructorInjectorImpl.construct(ConstructorInjectorImpl.java:144) org.jboss.resteasy.spi.ResteasyProviderFactory.getProviderInstance(ResteasyProviderFactory.java:1039) org.jboss.resteasy.spi.ResteasyProviderFactory.addMessageBodyReader(ResteasyProviderFactory.java:478) org.jboss.resteasy.spi.ResteasyProviderFactory.registerProvider(ResteasyProviderFactory.java:757) org.jboss.resteasy.plugins.providers.RegisterBuiltin.registerProviders(RegisterBuiltin.java:70) org.jboss.resteasy.plugins.providers.RegisterBuiltin.register(RegisterBuiltin.java:31) org.jboss.resteasy.spi.ResteasyDeployment.start(ResteasyDeployment.java:211) org.jboss.resteasy.plugins.server.servlet.ServletContainerDispatcher.init(ServletContainerDispatcher.java:67) org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.init(HttpServletDispatcher.java:36) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) java.lang.Thread.run(Thread.java:724) </pre>root cause <pre>java.lang.NoClassDefFoundError: org/codehaus/jackson/xc/JaxbAnnotationIntrospector org.ovirt.engine.api.json.JSONProvider.<init>(JSONProvider.java:32) sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45) java.lang.reflect.Constructor.newInstance(Constructor.java:526) org.jboss.resteasy.core.ConstructorInjectorImpl.construct(ConstructorInjectorImpl.java:132) org.jboss.resteasy.spi.ResteasyProviderFactory.getProviderInstance(ResteasyProviderFactory.java:1039) org.jboss.resteasy.spi.ResteasyProviderFactory.addMessageBodyReader(ResteasyProviderFactory.java:478) org.jboss.resteasy.spi.ResteasyProviderFactory.registerProvider(ResteasyProviderFactory.java:757) org.jboss.resteasy.plugins.providers.RegisterBuiltin.registerProviders(RegisterBuiltin.java:70) org.jboss.resteasy.plugins.providers.RegisterBuiltin.register(RegisterBuiltin.java:31) org.jboss.resteasy.spi.ResteasyDeployment.start(ResteasyDeployment.java:211) org.jboss.resteasy.plugins.server.servlet.ServletContainerDispatcher.init(ServletContainerDispatcher.java:67) org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.init(HttpServletDispatcher.java:36) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) java.lang.Thread.run(Thread.java:724) </pre>root cause <pre>java.lang.ClassNotFoundException: org.codehaus.jackson.xc.JaxbAnnotationIntrospector from [Module "org.ovirt.engine.api.restapi-definition:main" from local module loader @131b4c5d (roots: /home/lvernia/target/ovirt-engine/var/lib/ovirt-engine/jboss_runtime/modules/00-modules-common,/home/lvernia/target/ovirt-engine/var/lib/ovirt-engine/jboss_runtime/modules/01-jboss-as-modules)] org.jboss.modules.ModuleClassLoader.findClass(ModuleClassLoader.java:190) org.jboss.modules.ConcurrentClassLoader.performLoadClassUnchecked(ConcurrentClassLoader.java:468) org.jboss.modules.ConcurrentClassLoader.performLoadClassChecked(ConcurrentClassLoader.java:456) org.jboss.modules.ConcurrentClassLoader.performLoadClass(ConcurrentClassLoader.java:398) org.jboss.modules.ConcurrentClassLoader.loadClass(ConcurrentClassLoader.java:120) org.ovirt.engine.api.json.JSONProvider.<init>(JSONProvider.java:32) sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45) java.lang.reflect.Constructor.newInstance(Constructor.java:526) org.jboss.resteasy.core.ConstructorInjectorImpl.construct(ConstructorInjectorImpl.java:132) org.jboss.resteasy.spi.ResteasyProviderFactory.getProviderInstance(ResteasyProviderFactory.java:1039) org.jboss.resteasy.spi.ResteasyProviderFactory.addMessageBodyReader(ResteasyProviderFactory.java:478) org.jboss.resteasy.spi.ResteasyProviderFactory.registerProvider(ResteasyProviderFactory.java:757) org.jboss.resteasy.plugins.providers.RegisterBuiltin.registerProviders(RegisterBuiltin.java:70) org.jboss.resteasy.plugins.providers.RegisterBuiltin.register(RegisterBuiltin.java:31) org.jboss.resteasy.spi.ResteasyDeployment.start(ResteasyDeployment.java:211) org.jboss.resteasy.plugins.server.servlet.ServletContainerDispatcher.init(ServletContainerDispatcher.java:67) org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.init(HttpServletDispatcher.java:36) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) java.lang.Thread.run(Thread.java:724) </pre>note The full stack trace of the root cause is available in the JBoss Web/7.0.0.SNAPSHOT logs.<HR size="1" noshade="noshade"><h3>JBoss Web/7.0.0.SNAPSHOT</h3></body></html>

3 3

roles for foreman integration user
by Jorick Astrego 22 Jan '15

22 Jan '15

This is a multi-part message in MIME format. ------------MIME-296752662-1385342177-delim Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi=2C Quick question=2C which foreman roles does the foreman integration user require in the foreman=2E I=27ve tried a couple of permission settings but can only get the test to= work when the use has role admin=2E Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- ------------MIME-296752662-1385342177-delim Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Cbody=3E Hi,  Quick question, which foreman roles does the foreman integration user<= br> require in the foreman.  I've tried a couple of permission settings but can only get the test to&#13= ; work when the use has role admin.   = =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E ------------MIME-296752662-1385342177-delim--

2 6

[ANN] oVirt 3.5.1 Final Release is now available
by Sandro Bonazzola 22 Jan '15

22 Jan '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The oVirt team is pleased to announce that the oVirt 3.5.1 Final Release is now available as of Jan 21st 2015. The release candidate is available now for Fedora 20, Red Hat Enterprise Linux 6.6, CentOS 6.6, (or similar) and Red Hat Enterprise Linux 7, CentOS 7 (or similar). This release of oVirt includes numerous bug fixes. See the release notes [1] for a list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live and oVirt Node ISO will be available soon as well[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors - -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJUv89CAAoJEHw3u57E4QAOE5EP/iREEVWYXRt2u2yEZAIopat9 HTTb5ipHn6tc1he3V6pKzbM1LhFM5k0kx57X+EHw7eq2rYaOcmtEKPy8kEXEtXDt jFeWEI6vfi1ZebzZ5W4SkMQWuY6/iX5PUnDHyLDC9/wV/mucHLHsUe67W6Fr0SV+ c78xrv2/kfSITjHTZmZG1NnZRfYiB1MHOMrUxT65jSR/fwHN8+I1SQJbg+ntIUiW XRD9CvnPyy3OGphEeZP0RiqK24A/cUOXv2qeMd7l8jI3aHB5z/JEz7ODPk2pSrUR B4xkBVa60axzPtg4xcTFaN/klzegs4x3RPr0lHTdwipL0r17JA0/hoCJR0N4lZDN CtO41kjcyBKfAcYGM/ODoTmD//symYQdXEwi88c1HOvr/lepHiup6mDQt0fvXngD qvjVAx9r50UkQi3a+HiEw2jqOnwXDyubpC/HwjUl62wZ0uK7e6x5b5GQTAmY/USl Xa2wUNmh9xG81f0BeYcjXOnx/CVRu9gfamtagtb2i+P0sFhI7LnNqYc556cXdz7s rIgfmDO4QjMLiE6b8jYmiRaOb1mK0mBq1s5WHroikRH+JqNtUp7CX0U9OY0rCeaf hj3TCEe/6BT378lb30KZ1ELkgBCs1050xXBozx0W9vfj4PwFEj4vzenpHtpE/A8H 2xPTHrUW0uiQaqlohxeQ =nGaB -----END PGP SIGNATURE-----

3 2

Re: [ovirt-users] oVirt 3.5 and FreeIpa
by Marcelo Donato 22 Jan '15

22 Jan '15

Below the solution. Resolved By "Alon Bar-Lev" <alonbl(a)redhat.com> 1. install ovirt-engine-extension-aaa-ldap, it is available in ovirt-3.5-snapshots repository. 2. create /etc/ovirt-engine/extensions.d/din.intranet-authz.properties ovirt.engine.extension.name = din-intranet-authz ovirt.engine.extension.bindings.method = jbossmodule ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine-extensions.aaa.ldap ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engineextensions.aaa.ldap.AuthzExtension ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz config.profile.file.1 = /etc/ovirt-engine/aaa/din.intranet.properties 3. create /etc/ovirt-engine/extensions.d/din.intranet-authn.properties ovirt.engine.extension.name = din-intranet-authn ovirt.engine.extension.bindings.method = jbossmodule ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine-extensions.aaa.ldap ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engineextensions.aaa.ldap.AuthnExtension ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn ovirt.engine.aaa.authn.profile.name = din.intranet ovirt.engine.aaa.authn.authz.plugin = din-intranet-authz config.profile.file.1 = /etc/ovirt-engine/aaa/din.intranet.properties 4. create /etc/ovirt-engine/aaa/din.intranet.properties include = <ipa.properties> vars.user = uid=admin,cn=users,cn=accounts,dc=din,dc=intranet vars.password = 123456 vars.server = ipa1.din.intranet pool.default.serverset.single.server = ${global:vars.server} pool.default.auth.simple.bindDN = ${global:vars.user} pool.default.auth.simple.password = ${global:vars.password} 5. restart engine. Thanks a lot Alon. -- Ao encaminhar esta mensagem, por favor: 1. Apague o meu e-mail e o meu nome. 2. Apague também os endereços dos amigos antes de reenviar 3. Use Cco ou Bcc para enviar mensagens! Dificulte a disseminação de vírus e spam.

3 7

oVirt node weekly talk
by Tolik Litovsky 21 Jan '15

21 Jan '15

Hello Fabian Can we move the oVirt node weekly talk to another week day? Or just a bit earlier ? Best Regards. Tolik

4 3

firewalld rule for ovirt host?
by Jorick Astrego 21 Jan '15

21 Jan '15

This is a multi-part message in MIME format. ------------MIME-220968237-659321615-delim Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi=2C In the quickstart guide we have the iptables rules for a fedora 19 host=2C= but currently we run firewalld on the host =28Centos 7=29 I=27ve converted the rules to a service xml for the zone but I can=27t figure out the firewalld translation for =22-A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited =22 Anyone know how to do this in firewalld=3F Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- ------------MIME-220968237-659321615-delim Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Cbody=3E Hi,  In the quickstart guide we have the iptables rules for a fedora 19 host,&#1= 3; but currently we run firewalld on the host (Centos 7)  I've converted the rules to a service xml for the zone but I can't figure out the firewalld translation for "-A FORWARD -m physdev != --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited "&#1= 3;  Anyone know how to do this in firewalld?   = =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E ------------MIME-220968237-659321615-delim--

2 1

iSCSI Storage - sda failue - how to move VMs?
by shimano 21 Jan '15

21 Jan '15

Hi guys, I have some VMs with preallocated disks on - still "green" - iSCSI Storage domain, where one of disks is going to die, which caused to change iscsi mount to read only. Of course all VMs allocated on this storage has been paused or turned off. Is there any way to save these VMs (disks)?

2 1

iSCSI Storage - sda failue - how to move VMs?
by Andrzej Suś 21 Jan '15

21 Jan '15

Hi guys, I have some VMs with preallocated disks on - still "green" - iSCSI Storage domain, where one of disks is going to die, which caused to change iscsi mount to read only. Of course all VMs allocated on this storage has been paused or turned off. Is there any way to save these VMs (disks)?

1 0

Strange Error
by Koen Vanoppen 21 Jan '15

21 Jan '15

Dear All, The following appears in my ovirt-engine.log recently: 2015-01-21 13:41:44,181 WARN [org.ovirt.engine.core.bll.AddVmFromScratchCommand] (DefaultQuartzScheduler_Worker-52) [69997d54] CanDoAction of action AddVmFromScratch failed. Reasons:VAR__ACTION__ADD,VAR__TYPE__VM,ACTION_TYPE_FAILED_NAME_ALREADY_USED Any Ideas? It just keeps flooding my log file. Kind regards, Koen

1 0

[QE][ACTION REQUIRED] oVirt 3.6.0 status
by Sandro Bonazzola 21 Jan '15

21 Jan '15

Hi, I haven't many news for 3.6 this week: ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [1] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 21: 2014-12-09 (RELEASED) Fedora 22: 2015-05-19 Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 QEMU 2.1.3: 2014-01-21 QEMU 2.2.0: 2014-12-09 (RELEASED) QEMU 2.3.0: 2015-03-27 The tracker bug for 3.6.0 [2] currently shows no blockers. There are 502 bugs [3] targeted to 3.6.0. Excluding node and documentation bugs we have 454 bugs [4] targeted to 3.6.0. [1] http://goo.gl/9X3G49 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [3] https://bugzilla.redhat.com/buglist.cgi?quicksearch=target_release%3A3.6.0%… [4] http://goo.gl/ZbUiMc -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[QE][ACTION REQUIRED] oVirt 3.5.1 GA status
by Sandro Bonazzola 21 Jan '15

21 Jan '15

Hi, We have no blockers for oVirt 3.5.1 GA [1] so we're good to go with the release. We're now gathering final release rpms and performing last sanity tests. Maintainers: Please review packages list and provide required rpms There are still 50 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 30 bugs [3] targeted to 3.5.1. All of them will be automatically re-targeted to 3.5.2 if severity is set to high or urgent, otherwise they'll be re-targeted to 3.6 Maintainers / Assignee: - ACTION: Please fill release notes, the page has been created here [4] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Ovirt 3.5 / CentOS 7 / GlusterFS - Host loses network config on reboot
by Tim Macy 20 Jan '15

20 Jan '15

I have a three node cluster that worked fine upon setup, but randomly (Its happened three times now) when a host is rebooted it loses its network config. I backed up the ifcfg*, route, and rule* files to quickly put things back in place, but even then vdsm fails to start and host reinstall from the engine errors on vdsm startup. The only way that I have found to recover the node is yum remove vdsm* libvirt*, and rm -Rf /etc/vdsm & /var/lib/vdsm. Then I can run host reinstall from the engine. Where the error occurs in host-deploy log: 2015-01-20 01:21:58 DEBUG otopi.plugins.otopi.services.systemd plugin.execute:866 execute-output: ('/bin/systemctl', 'start', 'vdsmd.service') stderr: Job for vdsmd.service failed. See 'systemctl status vdsmd.service' and 'journalctl -xn' for details. 2015-01-20 01:21:58 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/tmp/ovirt-6z1CuMPhsV/pythonlib/otopi/context.py", line 142, in _executeMethod method['method']() File "/tmp/ovirt-6z1CuMPhsV/otopi-plugins/ovirt-host-deploy/vdsm/packages.py", line 219, in _start self.services.state('vdsmd', True) File "/tmp/ovirt-6z1CuMPhsV/otopi-plugins/otopi/services/systemd.py", line 138, in state 'start' if state else 'stop' File "/tmp/ovirt-6z1CuMPhsV/otopi-plugins/otopi/services/systemd.py", line 77, in _executeServiceCommand raiseOnError=raiseOnError File "/tmp/ovirt-6z1CuMPhsV/pythonlib/otopi/plugin.py", line 871, in execute command=args[0], RuntimeError: Command '/bin/systemctl' failed to execute 2015-01-20 01:21:58 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Closing up': Command '/bin/systemctl' failed to execute 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:490 ENVIRONMENT DUMP - BEGIN 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/error=bool:'True' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/exceptionInfo=list:'[(<type 'exceptions.RuntimeError'>, RuntimeError("Command '/bin/systemctl' failed to execute",), <traceback object at 0x259cbd8>)]' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:504 ENVIRONMENT DUMP - END 2015-01-20 01:21:58 INFO otopi.context context.runSequence:417 Stage: Pre-termination 2015-01-20 01:21:58 DEBUG otopi.context context.runSequence:421 STAGE pre-terminate 2015-01-20 01:21:58 DEBUG otopi.context context._executeMethod:138 Stage pre-terminate METHOD otopi.plugins.otopi.core.misc.Plugin._preTerminate 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:490 ENVIRONMENT DUMP - BEGIN 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/aborted=bool:'False' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/debug=int:'0' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/error=bool:'True' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/exceptionInfo=list:'[(<type 'exceptions.RuntimeError'>, RuntimeError("Command '/bin/systemctl' failed to execute",), <traceback object at 0x259cbd8>)]' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/executionDirectory=str:'/root' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/log=bool:'True' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/pluginGroups=str:'otopi:ovirt-host-deploy' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/pluginPath=str:'/tmp/ovirt-6z1CuMPhsV/otopi-plugins' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV BASE/suppressEnvironmentKeys=list:'[]' 2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV COMMAND/chkconfig=str:'/sbin/chkconfig'

1 0

答复: 答复: RESOLVED USB Modem in a VM
by Xie, Chao 20 Jan '15

20 Jan '15

Hi, all I later found a msi about "USBFilterEditor.msi" As the guide http://www.uaustral.cl/ovirt-engine/docs/manual/en_US/html/Administration_G… I use my own usbfilter.txt to replace the /etc/ovirt-engine/usbfilter.txt in the rhevm host. Then the vm can detect my usb device in the host ~ -----邮件原件----- 发件人: Itamar Heim [mailto:iheim@redhat.com] 发送时间: 2015年1月20日 14:37 收件人: Xie, Chao/谢超抄送: VONDRA Alain 主题: Re: 答复: [ovirt-users] RESOLVED USB Modem in a VM Please cc the mailing list and share if hook is installed on the host and custom properties defined properly, also, lsusb from before you start the VM. Thanks. On Jan 20, 2015 7:55 AM, "Xie, Chao" <xiec.fnst(a)cn.fujitsu.com> wrote: > > > Hello > I read all your letter about USB Modem. But I'm confused t Hello I read all your letter about USB Modem. But I'm confused that "USB Modem" means "USB Storage" or something else? I try to redirect the usb device in the host to vm (win7), but in vm there isn't any usb device. -----邮件原件----- 发件人: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] 代表 VONDRA Alain 发送时间: 2015年1月19日 19:32 收件人: VONDRA Alain; Itamar Heim; users(a)ovirt.org 主题: Re: [ovirt-users] RESOLVED USB Modem in a VM It's working, in fact after the update from oVirt 3.4 to 3.5 my Cluster compatibility version was still in 3.4, I've changed it to 3.5 and the hostusb appeared... Now the modem is well detected in my Windows 2008 VM. Thank you very much everybody for your help Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -----Message d'origine----- De : users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] De la part de VONDRA Alain Envoyé : lundi 19 janvier 2015 12:03 À : Itamar Heim; users(a)ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM Yes I made this : engine-config -s "UserDefinedVMProperties=hostusb=0x0572:0x1321" and nothing appear on the Edit VM, only : - sndbuf - vhost - sap_agent - viodiskattach Is there any possibility to verify ? The first command I put engine-config -s "UserDefinedVMProperties=hostusb=true;another_property=regexp" following the doc, maybe this option is blocking the hook ? Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -----Message d'origine----- De : Itamar Heim [mailto:iheim@redhat.com] Envoyé : lundi 19 janvier 2015 11:29 À : VONDRA Alain; users(a)ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM On 01/19/2015 12:23 PM, VONDRA Alain wrote: > Hi, > I've tried to use hook hostusb, I've installed vdsm-hook-hostusb.noarch 0:4.16.10-0.el6, and followed the documentation on http://www.ovirt.org/Vdsm_Hooks, but the new hook doesn't appear on the UI using "Edit VM" and "custom properties". > Is there any other way to install hooks, the documentation is not so clear, and I'm not very fine with python. > Thanks you don't need to know python. did you run the engine side commands (engine-config -s UserDefinedVMProperties... and restarted the engine)? check http://blog.conoracallahan.com/blog/2014/07/19/ovirt-usb-passthrough/ > Alain > > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information Direction > Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > -----Message d'origine----- > De : Itamar Heim [mailto:iheim@redhat.com] Envoyé : dimanche 18 > janvier 2015 11:42 À : VONDRA Alain Objet : Re: [ovirt-users] USB > Modem in a VM > > On 01/18/2015 12:36 PM, VONDRA Alain wrote: >> Hi, >> I didn't try yet this option http://www.ovirt.org/VDSM-Hooks/hostusb >> to inject it Do you think it will be a better solution ? > > that's the "right solution". > I'll reply again on list so folks can help you with it as needed. > >> Thanks >> Alain >> >> >> >> Alain VONDRA >> Chargé d'exploitation des Systèmes d'Information Direction >> Administrative et Financière >> +33 1 44 39 77 76 >> UNICEF France >> 3 rue Duguay Trouin 75006 PARIS >> www.unicef.fr >> >> >> >> >> ________________________________________ >> De : Itamar Heim [iheim(a)redhat.com] >> Envoyé : vendredi 16 janvier 2015 19:21 À : VONDRA Alain Objet : Re: >> [ovirt-users] USB Modem in a VM >> >> On 01/15/2015 05:56 PM, VONDRA Alain wrote: >>> Hi, >>> Thank you for your answer, I've tried to insert my USB modem, but it doesn't up in the Windows VM. >>> I've tried to insert via virt-manager without success, I can't apply the modification, however I see the modem using lsusb : >>> >>> lsusb >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant Systems (Rockwell), Inc. >>> >>> I've unload the "cdc_acm" kernel module via rmmod without success. >>> I've also tried to edit the xml appending the ID and VENDDOR tags : >>> >>> <hostdev mode='subsystem' type='usb'> >>> <source> >>> <vendor id='0x0572'/> >>> <product id='0x1321'/> >>> </source> >>> </hostdev> >>> >>> Ut at the first load the config disappears... >>> Do I need to restart the host or restart libvirtd services ? >>> >>> Thanks for your help >>> Alain >>> >>> >>> >>> Alain VONDRA >>> Chargé d'exploitation des Systèmes d'Information Direction >>> Administrative et Financière >>> +33 1 44 39 77 76 >>> UNICEF France >>> 3 rue Duguay Trouin 75006 PARIS >>> www.unicef.fr >>> >>> >>> >>> >>> -----Message d'origine----- >>> De : Alon Bar-Lev [mailto:alonbl@redhat.com] Envoyé : mardi 13 >>> janvier 2015 17:47 À : VONDRA Alain Cc : users(a)ovirt.org Objet : Re: >>> [ovirt-users] USB Modem in a VM >>> >>> >>> >>> ----- Original Message ----- >>>> From: "VONDRA Alain" <AVONDRA(a)unicef.fr> >>>> To: users(a)ovirt.org >>>> Sent: Tuesday, January 13, 2015 5:55:01 PM >>>> Subject: [ovirt-users] USB Modem in a VM >>>> >>>> >>>> >>>> Hi, >>>> >>>> Can you tell me if I can use an USB modem through one of the >>>> hypervisor hosts to a Windows VM ? >>>> >>>> I’d like to install a Windows Fax Server. >>>> >>>> Thank you for your answers. >>> >>> >>> should be possible using qemu args: -usbdevice >>> host:vendor_id:product_id >>> >>> in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties: >>> >>> <domain type='kvm'> >>> <name>...</name> >>> … >>> <devices> >>> … >>> <hostdev mode='subsystem' type='usb'> >>> <source> >>> <vendor id='0x@VENDOR@'/> >>> <product id='0x@DEVICE@'/> >>> </source> >>> </hostdev> >>> </devices> >>> </domain> >>> >>> if this option is not exposed in ui you can use vdsm-hooks[1] to modify the libvirt configuration and inject such device. >>> >>> Regards, >>> Alon >>> >>> [1] http://www.ovirt.org/VDSM-Hooks >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> >> have you used http://www.ovirt.org/VDSM-Hooks/hostusb to inject it? >> > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

2 1

Re: [ovirt-users] Migration from Xenserver 6.2 to KVM.
by mots 20 Jan '15

20 Jan '15

------=_Part_16_44294926.1421755079214 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable -----Urspr=C3=BCngliche Nachricht----- > Von:Yaniv Dary <ydary(a)redhat.com> > Gesendet: Die 20 Januar 2015 08:47 > An: Kalil de A. Carvalho <kalilac(a)gmail.com> > CC: users(a)ovirt.org > Betreff: Re: [ovirt-users] Migration from Xenserver 6.2 to KVM. >=20 >=20 >=20 > ----------- > From: "Kalil de A. Carvalho" <kalilac(a)gmail.com> > To: users(a)ovirt.org > Sent: Monday, January 19, 2015 7:43:31 PM > Subject: [ovirt-users] Migration from Xenserver 6.2 to KVM. >=20 > Hello all. >=20 > I work in a company that want test KVM/oVirt. >=20 > The problem is the current environment running Xenserver 6.2 and is mandatory that we can migrate from the Xenserver to KVM. >=20 > Research about it =C2=A0I saw that is not supported. >=20 > I this true=3F >=20 > You can use a v2v tool to migrate VMs from Xen to KVM, I believe. >=20 > Should not be a problem. That only works if it's a GNU/Linux installation running Xen, not with Xenserver. From what I've seen, the reason for this is that Xenserver doesn't include libvirt, so v2v can't connect to it. >=20 > Best regards. >=20 > -- >=20 > Atenciosamente, >=20 > Kalil de A. Carvalho >=20 > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >=20 > _______________________________________________ >=20 > Users mailing list >=20 > Users(a)ovirt.org >=20 > http://lists.ovirt.org/mailman/listinfo/users >=20 >=20 ------=_Part_16_44294926.1421755079214 Content-Type: application/pgp-signature; name=signature.asc Content-Transfer-Encoding: 7bit Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: CIPHERMAIL (2.8.6-4) iQEcBAEBCAAGBQJUvkLHAAoJELfzdzVzTtoKyNEH/0RcO0cEEf2k0ZRf+xkWsAVm CACZNHdwGUsIaWNAZitVn6vCrNZce8u4ihfuvSor3q9ZI+35Rl4IDJqR+FyfCqnB GiahJnRUydiwG6Gj/y9pVX8/JpwVODGhpwknMuhvqF75ECgmdnJQg6d/JLb8WoZf hvKD7d8+nbPLWWuE90d9pjcBKnXMSSKvjJwLxsS/baRJKwcZi+v94FO8bIpFi0i/ 76rOIMmiubZswlxupuak57pgVOhaJ18qGDz6pGM5TTe9HjadjZB7m/K6m73anZ+a OVLZfooNy6VLHiCe/VsJ8eGhsp503BYHFO3eRMko5W7UKam7DNaInX0BmxfpkHA= =1IG6 -----END PGP SIGNATURE----- ------=_Part_16_44294926.1421755079214--

3 2

oVirt Windows Guest Tools
by Nick Kesick 20 Jan '15

20 Jan '15

Hey guys, I see that the feature page for the oVirt Windows Guest Tools [1] has been updated to show that the tools have been released, but I don't see *any* download links anywhere. Can anyone shed some light on the download path so I can update the wiki? -- Cybertimber2005(a)gmail.com [1] http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools

6 5

Problem Upgrading 3.4.4 -> 3.5
by InterNetX - Juergen Gotteswinter 20 Jan '15

20 Jan '15

Hi, i am currently trying to upgrade an existing 3.4.4 Setup (which got upgraded several times before, starting at 3.3), but this time i run into a Error while Upgrading the DB -- snip -- ********* QUERY ********** ALTER TABLE event_subscriber DROP CONSTRAINT fk_event_subscriber_event_notification_methods; ************************** 2014-12-20 00:16:27 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.executeRaw:803 execute-result: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20141220001232-3xjymi.log', '-c', 'apply'], rc=1 2014-12-20 00:16:27 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.execute:861 execute-output: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20141220001232-3xjymi.log', '-c', 'apply'] stdout: Creating schema engine@localhost:5432/engine Saving custom users permissions on database objects... upgrade script detected a change in Config, View or Stored Procedure... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/0000_config.sql'... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/0010_custom.sql'... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/0020_add_materialized_views_table.sql'... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/0030_materialized_views_extensions.sql'... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/0040_extend_installed_by_column.sql'... Dropping materialized views... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0010_add_tables_for_gluster_volume_and_brick_details.sql'... Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0020_gluster_refresh_gluster_volume_details-event_map.sql'... Skipping upgrade script /usr/share/ovirt-engine/dbscripts/upgrade/03_05_0030_add_ha_columns_to_vds_statistics.sql, already installed by 03040610 Skipping upgrade script /usr/share/ovirt-engine/dbscripts/upgrade/03_05_0040_add_ha_maintenance_events.sql, already installed by 03040620 Running upgrade sql script '/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0050_event_notification_methods.sql'... 2014-12-20 00:16:27 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.execute:866 execute-output: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20141220001232-3xjymi.log', '-c', 'apply'] stderr: psql:/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0050_event_notification_methods.sql:2: ERROR: constraint "fk_event_subscriber_event_notification_methods" of relation "event_subscriber" does not exist FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0050_event_notification_methods.sql 2014-12-20 00:16:27 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/db/schema.py", line 291, in _misc oenginecons.EngineDBEnv.PGPASS_FILE File "/usr/lib/python2.6/site-packages/otopi/plugin.py", line 871, in execute command=args[0], RuntimeError: Command '/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute 2014-12-20 00:16:27 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute 2014-12-20 00:16:27 DEBUG otopi.transaction transaction.abort:131 aborting 'Yum Transaction' -- snip -- after that, engine-setup starts doing a rollback to 3.4.4 which worksflawless. Anyone got an Idea what is causing this? Thanks, Juergen

4 12

Migration from Xenserver 6.2 to KVM.
by Kalil de A. Carvalho 20 Jan '15

20 Jan '15

Hello all. I work in a company that want test KVM/oVirt. The problem is the current environment running Xenserver 6.2 and is mandatory that we can migrate from the Xenserver to KVM. Research about it I saw that is not supported. I this true? Best regards. -- Atenciosamente, Kalil de A. Carvalho

2 1

oVirt Resources Site
by Nick Kesick 19 Jan '15

19 Jan '15

I keep getting 404 errors when trying to access anything under http://resources.ovirt.org/releases/ . Is anyone else seeing the same thing? "Is it down right now" is seeing the same thing. http://www.isitdownrightnow.com/resources.ovirt.org.html -- Cybertimber2005(a)gmail.com

4 4

When will ovirt add GPU/vGPU support in the admin portal ?
by lof yer 19 Jan '15

19 Jan '15

Since I recently saw cloudstack have add this( https://cwiki.apache.org/confluence/display/CLOUDSTACK/GPU+and+vGPU+support… ). And iGVT( https://01.org/zh/xen/blogs/wangbo85/2014/intel-gvt-gxengt-pubic-release?la…) is released. If ovirt add this, it'll be very competitive for ovirt in VDI platforms.

4 4

ovirt 3.5 and power outages
by Kostyrev Aleksandr 19 Jan '15

19 Jan '15

good day, everybody! I've got three node cluster with power management enabled. As far as I understood to restart vms on the other host in the cluster in case when host suffered from power outage the engine has to be able to connect to host (specifically to vdsm) to be sure that host has been rebooted and it's not running any vms. But what if I'm running a lot of vms on the host and it's 3 o'clock in the morning and 1) engine has rebooted the host but the host cannot boot because of some hardware problem or new kernel gives a kernel panic? 2) the host's motherboard burned out and it cannot get booted so the engine will never connect to host and therefore all the vms that were running on that host won't migrate to other node in the cluster. So my cluster in that case is useless 'cause I'm not there to press "confirm host has been rebooted'. -- С уважением, Костырев Александр, системный администратор

3 2

Re: [ovirt-users] USB Modem in a VM
by Itamar Heim 19 Jan '15

19 Jan '15

On 01/19/2015 12:23 PM, VONDRA Alain wrote: > Hi, > I've tried to use hook hostusb, I've installed vdsm-hook-hostusb.noarch 0:4.16.10-0.el6, and followed the documentation on http://www.ovirt.org/Vdsm_Hooks, but the new hook doesn't appear on the UI using "Edit VM" and "custom properties". > Is there any other way to install hooks, the documentation is not so clear, and I'm not very fine with python. > Thanks you don't need to know python. did you run the engine side commands (engine-config -s UserDefinedVMProperties... and restarted the engine)? check http://blog.conoracallahan.com/blog/2014/07/19/ovirt-usb-passthrough/ > Alain > > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information > Direction Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > -----Message d'origine----- > De : Itamar Heim [mailto:iheim@redhat.com] > Envoyé : dimanche 18 janvier 2015 11:42 > À : VONDRA Alain > Objet : Re: [ovirt-users] USB Modem in a VM > > On 01/18/2015 12:36 PM, VONDRA Alain wrote: >> Hi, >> I didn't try yet this option http://www.ovirt.org/VDSM-Hooks/hostusb >> to inject it Do you think it will be a better solution ? > > that's the "right solution". > I'll reply again on list so folks can help you with it as needed. > >> Thanks >> Alain >> >> >> >> Alain VONDRA >> Chargé d'exploitation des Systèmes d'Information Direction >> Administrative et Financière >> +33 1 44 39 77 76 >> UNICEF France >> 3 rue Duguay Trouin 75006 PARIS >> www.unicef.fr >> >> >> >> >> ________________________________________ >> De : Itamar Heim [iheim(a)redhat.com] >> Envoyé : vendredi 16 janvier 2015 19:21 À : VONDRA Alain Objet : Re: >> [ovirt-users] USB Modem in a VM >> >> On 01/15/2015 05:56 PM, VONDRA Alain wrote: >>> Hi, >>> Thank you for your answer, I've tried to insert my USB modem, but it doesn't up in the Windows VM. >>> I've tried to insert via virt-manager without success, I can't apply the modification, however I see the modem using lsusb : >>> >>> lsusb >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 Avocent Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 Conexant Systems (Rockwell), Inc. >>> >>> I've unload the "cdc_acm" kernel module via rmmod without success. >>> I've also tried to edit the xml appending the ID and VENDDOR tags : >>> >>> <hostdev mode='subsystem' type='usb'> >>> <source> >>> <vendor id='0x0572'/> >>> <product id='0x1321'/> >>> </source> >>> </hostdev> >>> >>> Ut at the first load the config disappears... >>> Do I need to restart the host or restart libvirtd services ? >>> >>> Thanks for your help >>> Alain >>> >>> >>> >>> Alain VONDRA >>> Chargé d'exploitation des Systèmes d'Information Direction >>> Administrative et Financière >>> +33 1 44 39 77 76 >>> UNICEF France >>> 3 rue Duguay Trouin 75006 PARIS >>> www.unicef.fr >>> >>> >>> >>> >>> -----Message d'origine----- >>> De : Alon Bar-Lev [mailto:alonbl@redhat.com] Envoyé : mardi 13 >>> janvier 2015 17:47 À : VONDRA Alain Cc : users(a)ovirt.org Objet : Re: >>> [ovirt-users] USB Modem in a VM >>> >>> >>> >>> ----- Original Message ----- >>>> From: "VONDRA Alain" <AVONDRA(a)unicef.fr> >>>> To: users(a)ovirt.org >>>> Sent: Tuesday, January 13, 2015 5:55:01 PM >>>> Subject: [ovirt-users] USB Modem in a VM >>>> >>>> >>>> >>>> Hi, >>>> >>>> Can you tell me if I can use an USB modem through one of the >>>> hypervisor hosts to a Windows VM ? >>>> >>>> I’d like to install a Windows Fax Server. >>>> >>>> Thank you for your answers. >>> >>> >>> should be possible using qemu args: -usbdevice >>> host:vendor_id:product_id >>> >>> in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties: >>> >>> <domain type='kvm'> >>> <name>...</name> >>> … >>> <devices> >>> … >>> <hostdev mode='subsystem' type='usb'> >>> <source> >>> <vendor id='0x@VENDOR@'/> >>> <product id='0x@DEVICE@'/> >>> </source> >>> </hostdev> >>> </devices> >>> </domain> >>> >>> if this option is not exposed in ui you can use vdsm-hooks[1] to modify the libvirt configuration and inject such device. >>> >>> Regards, >>> Alon >>> >>> [1] http://www.ovirt.org/VDSM-Hooks >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> >> have you used http://www.ovirt.org/VDSM-Hooks/hostusb to inject it? >> >

2 2

Ovirt and power saving
by Mario Giammarco 18 Jan '15

18 Jan '15

Hello, I would like to ask if it is possible to do this use case with ovirt: 1) two servers powered on 2) operator suspend some virtual machines 3) load falls down 4) ovirt shutdown one server Then operator unpauses virtual machines and ovirt starts again the 2nd server. Thanks, Mario

8 25