- Users - oVirt List Archives

Re: [ovirt-users] Users Digest, Vol 39, Issue 50
by Nikolai Sednev 10 Dec '14

10 Dec '14

------=_Part_8758566_407473350.1418224697280 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Answering to message 2 (bond mode 4): * Mode 4 (802.3ad) This mode is known as Dynamic Link Aggregation mode. It creates aggregation groups that share the same speed and duplex settings. This mode requires a switch that supports IEEE 802.3ad Dynamic link. Please try configuring your 4 Cisco ports as port-channel/channel-group in active with LACP enabled capability on its ports. Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Wednesday, December 10, 2014 12:57:20 PM Subject: Users Digest, Vol 39, Issue 50 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Fwd: Fwd: run ovirt-shell script like background job - problem (Grzegorz Szypa) 2. oVirt bonding mode4 + cisco 2960 XR (??????? ????????) 3. Re: ??: 3.5 hosted engine: 2nd host Cannot acquire bridge address (Sandro Bonazzola) 4. [QE][ACTION REQUIRED] oVirt 3.6.0 status (Sandro Bonazzola) 5. [QE][ACTION REQUIRED] oVirt 3.5.1 RC status (Sandro Bonazzola) 6. Re: [QE][ACTION REQUIRED] oVirt 3.5.1 RC status (Francesco Romani) 7. Re: Adding domain to oVirt to 3.5 issue (Alon Bar-Lev) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Dec 2014 07:33:32 +0100 From: Grzegorz Szypa <grzegorz.szypa(a)gmail.com> To: users(a)ovirt.org Subject: [ovirt-users] Fwd: Fwd: run ovirt-shell script like background job - problem Message-ID: <CACL97+jXMDgCqCyWB79E=MaMwEn1Xx3ew4BiRTHYtfbphy=veg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Problem is solved. It must be install this: yum update packages not like this rpm -i *.rpm ---------- Forwarded message ---------- From: Grzegorz Szypa <grzegorz.szypa(a)gmail.com> Date: 2014-12-09 20:42 GMT+01:00 Subject: Re: [ovirt-users] Fwd: run ovirt-shell script like background job - problem To: Juan Hern?ndez <jhernand(a)redhat.com> So i have a question: When i install: rpm -i ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch.rpm ovirt-engine-cli-3.5.0.5-1.el6.noarch.rpm i got error conflict with current package ovirt-engine-3.4.x It was all-in-one instalation in one server. 2014-12-09 10:32 GMT+01:00 Juan Hern?ndez <jhernand(a)redhat.com>: > On 12/08/2014 08:05 PM, Grzegorz Szypa wrote: > > So, i have a question. > > > > Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible in ovirt-engine-3.4? > > > > Can install ovirt-engine-cli-3.5 on ovirt-engine-cli-3.4 and using him > > with landscape based on ovirt 3.4 ?? > > > > Yes, versions 3.5.x of ovirt-engine-cli and ovirt-engine-sdk-python (you > will need both) are compatible with version 3.4 of the engine. > > > 2014-12-07 17:33 GMT+01:00 Juan Hern?ndez <jhernand(a)redhat.com > > <mailto:jhernand@redhat.com>>: > > > > On 12/07/2014 05:05 PM, Grzegorz Szypa wrote: > > > Hi, > > > > > > I have a problem with running ovirt-shell script, that it starting > > VMs. > > > In dialog mode it's fine, but in background no :( > > > > > > Example script: > > > ovirt-shell -E 'action vm WinSrv2012r2 start' > > > > > > I start this job in cron as root. > > > > > > > > > Have somebody idea?? > > > > > > -- > > > G.Sz. > > > > > > > We used to have bug that made ovirt-shell fail when there wasn't a > tty > > available (like when running from cron): > > > > ovirt-shell cannot run in cron (/dev/tty missing) > > https://bugzilla.redhat.com/1119412 > > > > That was fixed in version 3.5.0.2, so make sure that you have at > least > > that version. > > > > If you still have problems please share the output of the ovirt-shell > > command. > > > > -- > > Direcci?n Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > > 3?D, 28016 Madrid, Spain > > Inscrita en el Reg. Mercantil de Madrid ? C.I.F. B82657941 - Red Hat > > S.L. > > > > > > > > > > -- > > G.Sz. > > > > > > > > -- > > G.Sz. > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > Direcci?n Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > 3?D, 28016 Madrid, Spain > Inscrita en el Reg. Mercantil de Madrid ? C.I.F. B82657941 - Red Hat S.L. > -- G.Sz. -- G.Sz. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141210/76801a84/attach…> ------------------------------ Message: 2 Date: Wed, 10 Dec 2014 10:20:01 +0300 From: ??????? ???????? <mail.griffon(a)gmail.com> To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: [ovirt-users] oVirt bonding mode4 + cisco 2960 XR Message-ID: <CAE85BH-VkK0PsdS=WQzmP61nYX2B-cE09tOEK8NpcuqYbANtCA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi, community! I have made bond0 mode4 (eth0+eth1+eth2+eth3) by oVirt portal. It's work well on CentOS 7 node. How I can setup my cisco 2960 XR switch for work with this bond0 for loadbalancing + aggregation (802.3ad)? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141210/9fcded22/attach…> ------------------------------ Message: 3 Date: Wed, 10 Dec 2014 08:37:32 +0100 From: Sandro Bonazzola <sbonazzo(a)redhat.com> To: Robert Story <rstory(a)tislabs.com> Cc: "users(a)ovirt.org" <users(a)ovirt.org> Subject: Re: [ovirt-users] ??: 3.5 hosted engine: 2nd host Cannot acquire bridge address Message-ID: <5487F83C.2020704(a)redhat.com> Content-Type: text/plain; charset=UTF-8 Il 09/12/2014 20:16, Robert Story ha scritto: > On Tue, 09 Dec 2014 10:33:51 +0100 Sandro wrote: > SB> > Looking at setup logs, you have: > SB> > OVEHOSTED_NETWORK/bridgeIf=str:'eth1.79' > SB> > [...] > SB> > which seems to fail matching REGEXP: > SB> > > SB> > _ADDRESS_RE = re.compile( > SB> > flags=re.VERBOSE, > SB> > pattern=r""" > SB> > \s+ > SB> > inet > SB> > \s > SB> > (?P<address>\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}) > SB> > .+ > SB> > \s+ > SB> > (?P<interface>\w+) > SB> > $ > SB> > """ > SB> > ) > SB> > > SB> > I guess the match is failing due to the '.' in 'eth1.79' > SB> > SB> If you haven't already opened a BZ about it, please open one, thanks > > https://bugzilla.redhat.com/show_bug.cgi?id=1172287 > Thanks > > Robert > -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ------------------------------ Message: 4 Date: Wed, 10 Dec 2014 09:02:13 +0100 From: Sandro Bonazzola <sbonazzo(a)redhat.com> To: "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status Message-ID: <5487FE05.3010703(a)redhat.com> Content-Type: text/plain; charset=iso-8859-15 Hi, Release criteria discussion has been closed and wiki has been updated accordingly by Brian [1][2]. Release management for 3.6.0 [3] has been updated with the accepted changes in release criteria. ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [4] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 21: 2014-12-09 (RELEASED) Fedora 22: no earlier than 2015-05-19 Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 Two different proposals have been made about above scheduling [5]: 1) extend the cycle to 10 months for allowing to include a large feature set 2) reduce the cycle to less than 6 months and split features over 3.6 and 3.7 and we can also add 3) keep current 6 months cycle The tracker bug for 3.6.0 [6] currently shows no blockers. There are 460 bugs [7] targeted to 3.6.0. Excluding node and documentation bugs we have 436 bugs [8] targeted to 3.6.0. [1] http://www.ovirt.org/Release_Criteria_Template [2] http://www.ovirt.org/Release_process [3] http://www.ovirt.org/OVirt_3.6_Release_Management [4] http://goo.gl/9X3G49 [5] http://lists.ovirt.org/pipermail/users/2014-November/028875.html [6] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [7] http://goo.gl/zwkF3r [8] http://goo.gl/ZbUiMc -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ------------------------------ Message: 5 Date: Wed, 10 Dec 2014 09:07:54 +0100 From: Sandro Bonazzola <sbonazzo(a)redhat.com> To: "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status Message-ID: <5487FF5A.6050809(a)redhat.com> Content-Type: text/plain; charset=iso-8859-15 Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. ACTION: Being so near to winter's holidays we need to discuss the new tentative date for RC in today sync meeting. The bug tracker [1] shows 2 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile 1168709 virt NEW Hosted Engine VM is listed as paused after upgrading from 3.4.4 to 3.5.1 snapshot In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: assignee please provide ETA on above blockers Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 63 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 42 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ------------------------------ Message: 6 Date: Wed, 10 Dec 2014 03:12:20 -0500 (EST) From: Francesco Romani <fromani(a)redhat.com> To: Sandro Bonazzola <sbonazzo(a)redhat.com> Cc: Users(a)ovirt.org, devel(a)ovirt.org Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status Message-ID: <805014182.8558086.1418199140322.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com> > To: Users(a)ovirt.org, devel(a)ovirt.org > Sent: Wednesday, December 10, 2014 9:07:54 AM > Subject: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status > > Hi, > We have still blockers for oVirt 3.5.1 RC release so we need to postpone it > until they'll be fixed. > ACTION: Being so near to winter's holidays we need to discuss the new > tentative date for RC in today sync meeting. > > The bug tracker [1] shows 2 open blocker: > Bug ID Whiteboard Status Summary > 1160846 sla NEW Can't add disk to VM without specifying disk profile when > the storage domain has more than one disk profile > 1168709 virt NEW Hosted Engine VM is listed as paused after upgrading from > 3.4.4 to 3.5.1 snapshot > > In order to stabilize the release a new branch ovirt-engine-3.5.1 will be > created from the same git hash used for composing the RC. > > - ACTION: assignee please provide ETA on above blockers 1168709 - patch seems simple, posted and verified (BZ entry just updated to POST). needs review. ETA for merge: definitely within the week, worst case. Bests, -- Francesco Romani RedHat Engineering Virtualization R & D Phone: 8261328 IRC: fromani ------------------------------ Message: 7 Date: Wed, 10 Dec 2014 05:57:14 -0500 (EST) From: Alon Bar-Lev <alonbl(a)redhat.com> To: Juan Jose <jj197005(a)gmail.com> Cc: users <users(a)ovirt.org> Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue Message-ID: <1512532550.7193502.1418209034660.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 ----- Original Message ----- > From: "Juan Jose" <jj197005(a)gmail.com> > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" <yzaslavs(a)redhat.com> > Sent: Wednesday, December 10, 2014 12:30:34 PM > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue > > Hello Alon and Yair, > > Many thanks for your help, finally It works properly. My problem, after > last Alon indications was that my user "Juanjo" was defined with SuperUser > role in the previous domain configuration. I have loggen in with admin user > from internal and I have removed old configuration and I have configured my > user "Juanjo" with all administrators roles in folder "Permission" and I > can log in in administration portal without problems and it works properly. > > My final configuration I have is an emulated *AD based on Samba 4* and the > final configuration files are: Good! So samba is not emulating active directory entirely :) But good to know it is working. Please also checkout group membership. > ovirt-engine-extension-aaa-ldap.noarch > 1.0.1-0.0.master.20141209141731.git0437701.el6 this fix for samba ad will be released in 1.0.1. > > */etc/ovirt-engine/extensions.d/siee-local-authn.properties*: > > ovirt.engine.extension.name = siee-local-authn > ovirt.engine.extension.bindings.method = jbossmodule > ovirt.engine.extension.binding.jbossmodule.module = > org.ovirt.engine-extensions.aaa.ldap > ovirt.engine.extension.binding.jbossmodule.class = > org.ovirt.engineextensions.aaa.ldap.AuthnExtension > ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn > ovirt.engine.aaa.authn.profile.name = siee > ovirt.engine.aaa.authn.authz.plugin = siee-local-authz > config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties > > */etc/ovirt-engine/extensions.d/siee-local-authz.properties*: > > ovirt.engine.extension.name = siee-local-authz > ovirt.engine.extension.bindings.method = jbossmodule > ovirt.engine.extension.binding.jbossmodule.module = > org.ovirt.engine-extensions.aaa.ldap > ovirt.engine.extension.binding.jbossmodule.class = > org.ovirt.engineextensions.aaa.ldap.AuthzExtension > ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz > config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties > > */etc/ovirt-engine/aaa/siee.properties*: > > include = <ad.properties> > > # > # Active directory domain name. > # > vars.domain = siee.local > > # > # Search user and its password. > # > vars.user = searcher@${global:vars.domain} > vars.password = xxxx > > # > # Optional DNS servers, if enterprise > # DNS server cannot resolve the domain srvrecord. > # > #vars.dns = dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain} > > pool.default.serverset.type = srvrecord > pool.default.serverset.srvrecord.domain = ${global:vars.domain} > pool.default.auth.simple.bindDN = ${global:vars.user} > pool.default.auth.simple.password = ${global:vars.password} > > # Uncomment if using custom DNS > #pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url > = ${global:vars.dns} > #pool.default.socketfactory.resolver.uRL = ${global:vars.dns} > > # Create keystore, import certificate chain and uncomment > # if using ssl/tls. > #pool.default.ssl.startTLS = true > #pool.default.ssl.truststore.file = > ${local:_basedir}/${global:vars.domain}.jks > #pool.default.ssl.truststore.password = changeit You should enable SSL for production use... as you do not want passwords to be transmitted in clear. Not sure how you install ssl on the samba ldap... but once you do, follow the README instructions[1] [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob… > > */etc/krb5.conf*: You are not using kerberos, so there is no reason to configure it for setup to work. > > [logging] > default = FILE:/var/log/krb5libs.log > kdc = FILE:/var/log/krb5kdc.log > admin_server = FILE:/var/log/kadmind.log > > [libdefaults] > default_realm = SIEE.LOCAL > dns_lookup_realm = true > dns_lookup_kdc = true > ticket_lifetime = 24h > renew_lifetime = 7d > forwardable = no > default_tkt_enctypes = arcfour-hmac-md5 > udp_preference_limit = 1 > > #[realms] > > #[domain_realm] > # .siee.local = SIEE.LOCAL > # siee.local = SIEE.LOCAL > > > Many thanks again to everybody, > > Juanjo. > > On Tue, Dec 9, 2014 at 5:31 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote: > > > > > > > ----- Original Message ----- > > > From: "Juan Jose" <jj197005(a)gmail.com> > > > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" < > > yzaslavs(a)redhat.com> > > > Sent: Tuesday, December 9, 2014 5:42:56 PM > > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue > > > > > > Hello Alon, > > > > > > In my firsts e-mails I had already said that I have an emulation of AD > > > based on Samba 4. I have tested the last version ov > > > ovirt-engine-extension-aaa-ldap package and I think the problem is the > > same > > > although the error is "User is not authorized to perform this action". > > > > > > I attach the enginle.log. > > > > USER_NOT_AUTHORIZED_TO_PERFORM_ACTION means user is not superuser or can > > manage objects as far as I know. > > > > I see siee0(a)siee.local is trying to login which is CN=siee0 > > siee0,CN=Users,DC=siee,DC=local > > > > Login succeeds. > > > > I do not see any groups it belongs to. > > > > Are you sure you added this user role within the webadmin or that user > > belongs to groups that were added to engine with such roles? > > > > > > > > In case that the new oVirt version 3.5 doesn't work with an AD emulation > > > based on Samba 4, is it possible to do user authentication with an > > OpenLDAP > > > directly with this 3.5 version?, if it is so, could you give me the link > > to > > > the documentation to configure OpenLDAP authentication? > > > > Sure, just use the > > /usr/share/ovirt-engine-extension-aaa-ldap/examples/simple copy recursive > > into /etc/ovirt-engine, then modify /etc/ovirt-engine/aaa/ldap1.properties > > set vars.server, vars.user, vars.password. > > > > Until 3.5.1 you should also > > /etc/ovirt-engine/extensions.d/domain1*.properties and replace ../aaa to > > /etc/ovirt-engine/aaa > > > > > > > Many thanks in advanced, > > > > > > Juanjo. > > > > > > On Tue, Dec 9, 2014 at 3:16 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote: > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Alon Bar-Lev" <alonbl(a)redhat.com> > > > > > To: "Juan Jose" <jj197005(a)gmail.com> > > > > > Cc: "users" <users(a)ovirt.org> > > > > > Sent: Tuesday, December 9, 2014 3:59:33 PM > > > > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue > > > > > > > > > > We start over... > > > > > > > > > > This is not active directory... it is samba. > > > > > > > > > > Attribute(name=vendorName, values={'Samba Team (http://samba.org)'}) > > > > > > > > > > Only now I realized this, maybe you mentioned it earlier not sure. > > > > > > > > > > Of course this was never tested, so probably not working. > > > > > > > > > > I see that samba does not return a list of extended operations, I > > will > > > > > workaround this and we can see what's else differ from active > > directory. > > > > > > > > Can you please checkout the following rpm[1]? > > > > > > > > [1] > > > > > > http://jenkins.ovirt.org/job/ovirt-engine-extension-aaa-ldap_master_create-… > > > > > > > > > > ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 50 ************************************* ------=_Part_8758566_407473350.1418224697280 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div>Answering to message 2 (bond mode 4):</div><div><ul style= =3D"box-sizing: border-box; margin: 0px 0px 1.75rem 2rem; padding: 0px; lin= e-height: 28px; list-style-position: outside; font-family: 'Open Sans', san= s-serif; color: #4c4c4c; background-color: #ffffff;" data-mce-style=3D"box-= sizing: border-box; margin: 0px 0px 1.75rem 2rem; padding: 0px; line-height= : 28px; list-style-position: outside; font-family: 'Open Sans', sans-serif;= color: #4c4c4c; background-color: #ffffff;"><li style=3D"box-sizing: borde= r-box; margin: 0px; padding: 0px;" data-mce-style=3D"box-sizing: border-box= ; margin: 0px; padding: 0px;">Mode 4 (802.3ad) This mode is known as D= ynamic Link Aggregation mode. It creates aggregation groups that share the = same speed and duplex settings. This mode requires a switch that supports I= EEE 802.3ad Dynamic link.</li></ul></div><div>Please try configuring your 4= Cisco ports as port-channel/channel-group in active with LACP enabled capa= bility on its ports.</div><div> </div><div> T= hanks in advance. <div> </div>Best regards, Nikolai ___________= _________ Nikolai Sednev Senior Quality Engineer at Compute team R= ed Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 <div> <= /div>Tel:       +972   9 7692043 Mobile: +972 52 734= 2734 Email: nsednev(a)redhat.com IRC: nsednev<b= r></div><div> </div><hr id=3D"zwchr"><div style=3D"color:#000;font-weigh= t:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial= ,sans-serif;font-size:12pt;">From: users-request(a)ovirt.org To:= users(a)ovirt.org Sent: Wednesday, December 10, 2014 12:57:20 = PM Subject: Users Digest, Vol 39, Issue 50 <div> </div>Send= Users mailing list submissions to       &= nbsp; users(a)ovirt.org <div> </div>To subscribe or unsubscribe vi= a the World Wide Web, visit        &n= bsp;http://lists.ovirt.org/mailman/listinfo/users or, via email, send a = message with subject or body 'help' to      &nb= sp;  users-request(a)ovirt.org <div> </div>You can reach the = person managing the list at        &n= bsp;users-owner(a)ovirt.org <div> </div>When replying, please edit your= Subject line so it is more specific than "Re: Contents of Users digest.= .." <div> </div> Today's Topics: <div> </div>   1.=  Fwd: Fwd: run ovirt-shell script like background job  &nbs= p;     -       problem (Grz= egorz Szypa)    2.  oVirt bonding mode4 + cisco 2960 XR (= ??????? ????????)    3. Re:  ??:  3.5 hosted engine:= 2nd host Cannot acquire bridge       address (Sandr= o Bonazzola)    4.  [QE][ACTION REQUIRED] oVirt 3.6.0 sta= tus (Sandro Bonazzola)    5.  [QE][ACTION REQUIRED] oVirt= 3.5.1 RC status (Sandro Bonazzola)    6. Re:  [QE][ACTIO= N REQUIRED] oVirt 3.5.1 RC status       (Francesco R= omani)    7. Re:  Adding domain to oVirt to 3.5 issue (Al= on Bar-Lev) <div> </div> -----------------------------------------= ----------------------------- <div> </div>Message: 1 Date: Wed, 10= Dec 2014 07:33:32 +0100 From: Grzegorz Szypa <grzegorz.szypa(a)gmail.c= om> To: users(a)ovirt.org Subject: [ovirt-users] Fwd: Fwd: run ovirt= -shell script like         backg= round job        - problem Messa= ge-ID:         <CACL97+jXMDgC= qCyWB79E=3DMaMwEn1Xx3ew4BiRTHYtfbphy=3Dveg(a)mail.gmail.com> Content-Ty= pe: text/plain; charset=3D"utf-8" <div> </div>Problem is solved. <= div> </div>It must be install this: <div> </div>yum update package= s <div> </div>not like this rpm -i *.rpm <div> </div> ---= ------- Forwarded message ---------- From: Grzegorz Szypa <grzegorz.s= zypa(a)gmail.com> Date: 2014-12-09 20:42 GMT+01:00 Subject: Re: [ovi= rt-users] Fwd: run ovirt-shell script like background job - problem T= o: Juan Hern?ndez <jhernand(a)redhat.com> <div> </div> So i ha= ve a question: <div> </div>When i install: <div> </div>rpm -i o= virt-engine-sdk-python-3.5.0.7-1.el6.noarch.rpm ovirt-engine-cli-3.5.0.5= -1.el6.noarch.rpm <div> </div>i got error conflict with current packa= ge ovirt-engine-3.4.x <div> </div>It was all-in-one instalation in on= e server. <div> </div> <div> </div>2014-12-09 10:32 GMT+01:00 J= uan Hern?ndez <jhernand(a)redhat.com>: <div> </div>> On 12/08/= 2014 08:05 PM, Grzegorz Szypa wrote: > > So, i have a question.<br= >> > > > Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible= in ovirt-engine-3.4? > > > > Can install ovirt-engine-cl= i-3.5 on ovirt-engine-cli-3.4 and using him > > with landscape bas= ed on ovirt 3.4 ?? > > > > Yes, versions 3.5.x of ovir= t-engine-cli and ovirt-engine-sdk-python (you > will need both) are c= ompatible with version 3.4 of the engine. > > > 2014-12-07 1= 7:33 GMT+01:00 Juan Hern?ndez <jhernand(a)redhat.com > > <mail= to:jhernand@redhat.com>>: > > > >     On = 12/07/2014 05:05 PM, Grzegorz Szypa wrote: > >     > = Hi, > >     > > >     > I have = a problem with running ovirt-shell script, that it starting > > &n= bsp;   VMs. > >     > In dialog mode it's fine, = but in background no :( > >     > > >  =   > Example script: > >     > ovirt-shell -E= 'action vm WinSrv2012r2 start' > >     > > &gt= ;     > I start this job in cron as root. > >   =   > > >     > > >     >= Have somebody idea?? > >     > > >   &= nbsp; > -- > >     > G.Sz. > >   &nb= sp; > > > > >     We used to have bug that m= ade ovirt-shell fail when there wasn't a > tty > >   &n= bsp; available (like when running from cron): > > > > &nb= sp;     ovirt-shell cannot run in cron (/dev/tty missing) >= >       https://bugzilla.redhat.com/1119412 > >= > >     That was fixed in version 3.5.0.2, so make sure= that you have at > least > >     that version.<br= >> > > >     If you still have problems please sha= re the output of the ovirt-shell > >     command. &gt= ; > > >     -- > >     Direcci?n C= omercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > > &nb= sp;   3?D, 28016 Madrid, Spain > >     Inscrita en = el Reg. Mercantil de Madrid ? C.I.F. B82657941 - Red Hat > > &nbsp= ;   S.L. > > > > > > > > > &= gt; -- > > G.Sz. > > > > > > > &g= t; -- > > G.Sz. > > > > > > ___________= ____________________________________ > > Users mailing list &gt= ; > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo= /users > > > > > -- > Direcci?n Comercial:= C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > 3?D, 28016 Madrid= , Spain > Inscrita en el Reg. Mercantil de Madrid ? C.I.F. B82657941 = - Red Hat S.L. > <div> </div> <div> </div>-- G.Sz.<br= ><div> </div> <div> </div>-- G.Sz. -------------- next part= -------------- An HTML attachment was scrubbed... URL: <http://li= sts.ovirt.org/pipermail/users/attachments/20141210/76801a84/attachment-0001= .html> <div> </div>------------------------------ <div> </di= v>Message: 2 Date: Wed, 10 Dec 2014 10:20:01 +0300 From: ??????? ????= ????         <mail.griffon@gmail= .com> To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: [ovir= t-users] oVirt bonding mode4 + cisco 2960 XR Message-ID:   =       <CAE85BH-VkK0PsdS=3DWQzmP61nYX2B-cE0= 9tOEK8NpcuqYbANtCA(a)mail.gmail.com> Content-Type: text/plain; charset= =3D"utf-8" <div> </div>Hi, community! <div> </div>I have made b= ond0 mode4 (eth0+eth1+eth2+eth3) by oVirt portal. It's work well on Cent= OS 7 node. <div> </div>How I can setup my cisco 2960 XR switch for wo= rk with this bond0 for loadbalancing + aggregation (802.3ad)? -------= ------- next part -------------- An HTML attachment was scrubbed... U= RL: <http://lists.ovirt.org/pipermail/users/attachments/20141210/9fcded2= 2/attachment-0001.html> <div> </div>------------------------------= <div> </div>Message: 3 Date: Wed, 10 Dec 2014 08:37:32 +0100 F= rom: Sandro Bonazzola <sbonazzo(a)redhat.com> To: Robert Story <r= story(a)tislabs.com> Cc: "users(a)ovirt.org" <users(a)ovirt.org> S= ubject: Re: [ovirt-users] ??:  3.5 hosted engine: 2nd host Cannot &= nbsp;       acquire bridge address Me= ssage-ID: <5487F83C.2020704(a)redhat.com> Content-Type: text/plain; = charset=3DUTF-8 <div> </div>Il 09/12/2014 20:16, Robert Story ha scri= tto: > On Tue, 09 Dec 2014 10:33:51 +0100 Sandro wrote: > SB&gt= ; > Looking at setup logs, you have: > SB> > OVEHOSTED_NETWO= RK/bridgeIf=3Dstr:'eth1.79' > SB> > [...] > SB> > w= hich seems to fail matching REGEXP: > SB> > > SB> &gt= ;     _ADDRESS_RE =3D re.compile( > SB> >   &nbs= p;     flags=3Dre.VERBOSE, > SB> >     &nbs= p;   pattern=3Dr""" > SB> >         &n= bsp;   \s+ > SB> >           &nbs= p; inet > SB> >             \s<br= >> SB> >             (?P<address&= gt;\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}) > SB> >     &n= bsp;       .+ > SB> >       &nbsp= ;     \s+ > SB> >           =   (?P<interface>\w+) > SB> >       &n= bsp;     $ > SB> >     """ > SB> &= gt;     ) > SB> > > SB> > I guess the ma= tch is failing due to the '.' in 'eth1.79' > SB> > SB> I= f you haven't already opened a BZ about it, please open one, thanks >= >   https://bugzilla.redhat.com/show_bug.cgi?id=3D1172287 &= gt; <div> </div>Thanks <div> </div>> > Robert &gt= ; <div> </div> -- Sandro Bonazzola Better technology. Fast= er innovation. Powered by community collaboration. See how it works at r= edhat.com <div> </div> ------------------------------ <div> = </div>Message: 4 Date: Wed, 10 Dec 2014 09:02:13 +0100 From: Sandro B= onazzola <sbonazzo(a)redhat.com> To: "Users(a)ovirt.org" <Users@ovi= rt.org>, "devel(a)ovirt.org"        =  <devel(a)ovirt.org> Subject: [ovirt-users] [QE][ACTION REQUIRE= D] oVirt 3.6.0 status Message-ID: <5487FE05.3010703(a)redhat.com><br= >Content-Type: text/plain; charset=3Diso-8859-15 <div> </div>Hi, <= div> </div>Release criteria discussion has been closed and wiki has been= updated accordingly by Brian [1][2]. <div> </div>Release management = for 3.6.0 [3] has been updated with the accepted changes in release criteri= a. <div> </div>ACTION: Feature proposed for 3.6.0 must now be collect= ed in the 3.6 Google doc [4] and reviewed by maintainers. Finished the r= eview process, the remaining key milestones for this release will be schedu= led. <div> </div>For reference, external project schedules we're trac= king are:     Fedora 21: 2014-12-09 (RELEASED)  &= nbsp;  Fedora 22: no earlier than 2015-05-19     For= eman 1.8.0: 2015-03-01     GlusterFS 3.7: 2015-04-29 &= nbsp;   OpenStack Kilo: 2015-04-30 <div> </div> Two diff= erent proposals have been made about above scheduling [5]: 1) extend the= cycle to 10 months for allowing to include a large feature set 2) reduc= e the cycle to less than 6 months and split features over 3.6 and 3.7 <d= iv> </div>and we can also add <div> </div>3) keep current 6 months= cycle <div> </div>The tracker bug for 3.6.0 [6] currently shows no b= lockers. <div> </div>There are 460 bugs [7] targeted to 3.6.0. Exc= luding node and documentation bugs we have 436 bugs [8] targeted to 3.6.0.<= br><div> </div> [1] http://www.ovirt.org/Release_Criteria_Template<br= >[2] http://www.ovirt.org/Release_process [3] http://www.ovirt.org/OVirt= _3.6_Release_Management [4] http://goo.gl/9X3G49 [5] http://lists.ovi= rt.org/pipermail/users/2014-November/028875.html [6] https://bugzilla.re= dhat.com/show_bug.cgi?id=3D1155425 [7] http://goo.gl/zwkF3r [8] http:= //goo.gl/ZbUiMc <div> </div> -- Sandro Bonazzola Better tec= hnology. Faster innovation. Powered by community collaboration. See how = it works at redhat.com <div> </div> ------------------------------= <div> </div>Message: 5 Date: Wed, 10 Dec 2014 09:07:54 +0100 F= rom: Sandro Bonazzola <sbonazzo(a)redhat.com> To: "Users(a)ovirt.org" = <Users(a)ovirt.org>, "devel(a)ovirt.org"     &nbsp= ;   <devel(a)ovirt.org> Subject: [ovirt-users] [QE][A= CTION REQUIRED] oVirt 3.5.1 RC status Message-ID: <5487FF5A.6050809@r= edhat.com> Content-Type: text/plain; charset=3Diso-8859-15 <div><b= r></div>Hi, We have still blockers for oVirt 3.5.1 RC release so we need= to postpone it until they'll be fixed. ACTION: Being so near to winter'= s holidays we need to discuss the new tentative date for RC in today sync m= eeting. <div> </div>The bug tracker [1] shows 2 open blocker: Bug = ID        Whiteboard  &nb= sp;     Status      =           Summary 1160= 846        sla   &nb= sp;            = NEW            =     Can't add disk to VM without specifying disk profil= e when the storage domain has more than one disk profile 1168709 &n= bsp;      virt     &= nbsp;          NEW &= nbsp;           &nbs= p;  Hosted Engine VM is listed as paused after upgrading from 3.4= .4 to 3.5.1 snapshot <div> </div>In order to stabilize the release a = new branch ovirt-engine-3.5.1 will be created from the same git hash used f= or composing the RC. <div> </div>- ACTION: assignee please provide ET= A on above blockers <div> </div>Maintainers: - Please be sure that= 3.5 snapshot allow to create VMs - Please be sure that no pending patch= es are going to block the release - If any patch must block the RC relea= se please raise the issue as soon as possible. <div> </div>There are = still 63 bugs [2] targeted to 3.5.1. Excluding node and documentation bu= gs we still have 42 bugs [3] targeted to 3.5.1. <div> </div>Maintaine= rs / Assignee: - Please add the bugs to the tracker if you think that 3.= 5.1 should not be released without them fixed. - ACTION: Please update t= he target to 3.5.2 or later for bugs that won't be in 3.5.1:  &nbsp= ;it will ease gathering the blocking bugs for next releases. - ACTION: P= lease fill release notes, the page has been created here [4] <div> </= div>Community: - If you're testing oVirt 3.5 nightly snapshot, please ad= d yourself to the test page [5] <div> </div> [1] http://bugzilla.r= edhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr<b= r>[4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovir= t.org/Testing/oVirt_3.5.1_Testing <div> </div>-- Sandro Bonazzola= Better technology. Faster innovation. Powered by community collaboratio= n. See how it works at redhat.com <div> </div> ----------------= -------------- <div> </div>Message: 6 Date: Wed, 10 Dec 2014 03:12= :20 -0500 (EST) From: Francesco Romani <fromani(a)redhat.com> To:= Sandro Bonazzola <sbonazzo(a)redhat.com> Cc: Users(a)ovirt.org, devel= @ovirt.org Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 = RC status Message-ID:        &nbsp= ;<805014182.8558086.1418199140322.JavaMail.zimbra(a)redhat.com> Cont= ent-Type: text/plain; charset=3Dutf-8 <div> </div>----- Original Mess= age ----- > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com> &= gt; To: Users(a)ovirt.org, devel(a)ovirt.org > Sent: Wednesday, December = 10, 2014 9:07:54 AM > Subject: [ovirt-users] [QE][ACTION REQUIRED] oV= irt 3.5.1 RC status > > Hi, > We have still blockers for= oVirt 3.5.1 RC release so we need to postpone it > until they'll be = fixed. > ACTION: Being so near to winter's holidays we need to discus= s the new > tentative date for RC in today sync meeting. > = > The bug tracker [1] shows 2 open blocker: > Bug ID  &n= bsp;     Whiteboard     &= nbsp;  Status        &nbs= p;       Summary > 1160846 &n= bsp;      sla     &n= bsp;          NEW &n= bsp;           &nbsp= ;  Can't add disk to VM without specifying disk profile when &= gt; the storage domain has more than one disk profile > 1168709 =        virt    &nbsp= ;           NEW&nbsp= ;            &n= bsp;  Hosted Engine VM is listed as paused after upgrading from<b= r>> 3.4.4 to 3.5.1 snapshot > > In order to stabilize the r= elease a new branch ovirt-engine-3.5.1 will be > created from the sam= e git hash used for composing the RC. > > - ACTION: assignee p= lease provide ETA on above blockers <div> </div>1168709 - patch seems= simple, posted and verified (BZ entry just updated to POST). needs revi= ew. ETA for merge: definitely within the week, worst case. <div> </di= v>Bests, <div> </div>-- Francesco Romani RedHat Engineering Vi= rtualization R & D Phone: 8261328 IRC: fromani <div> </div>= ------------------------------ <div> </div>Message: 7 Date: We= d, 10 Dec 2014 05:57:14 -0500 (EST) From: Alon Bar-Lev <alonbl@redhat= .com> To: Juan Jose <jj197005(a)gmail.com> Cc: users <users= @ovirt.org> Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 = issue Message-ID:         &lt= ;1512532550.7193502.1418209034660.JavaMail.zimbra(a)redhat.com> Content= -Type: text/plain; charset=3Dutf-8 <div> </div> <div> </div>---= -- Original Message ----- > From: "Juan Jose" <jj197005(a)gmail.com&= gt; > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" = <yzaslavs(a)redhat.com> > Sent: Wednesday, December 10, 2014 12:3= 0:34 PM > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 is= sue > > Hello Alon and Yair, > > Many thanks for = your help, finally It works properly. My problem, after > last Alon i= ndications was that my user "Juanjo" was defined with SuperUser > rol= e in the previous domain configuration. I have loggen in with admin user<br= >> from internal and I have removed old configuration and I have configu= red my > user "Juanjo" with all administrators roles in folder "Permi= ssion" and I > can log in in administration portal without problems a= nd it works properly. > > My final configuration I have is an = emulated *AD based on Samba 4* and the > final configuration files ar= e: <div> </div>Good! So samba is not emulating active directory en= tirely :) But good to know it is working. Please also checkout group = membership. <div> </div>> ovirt-engine-extension-aaa-ldap.noarch<b= r>> 1.0.1-0.0.master.20141209141731.git0437701.el6 <div> </div>thi= s fix for samba ad will be released in 1.0.1. <div> </div>> &g= t; */etc/ovirt-engine/extensions.d/siee-local-authn.properties*: > <b= r>> ovirt.engine.extension.name =3D siee-local-authn > ovirt.engin= e.extension.bindings.method =3D jbossmodule > ovirt.engine.extension.= binding.jbossmodule.module =3D > org.ovirt.engine-extensions.aaa.ldap= > ovirt.engine.extension.binding.jbossmodule.class =3D > org.o= virt.engineextensions.aaa.ldap.AuthnExtension > ovirt.engine.extensio= n.provides =3D org.ovirt.engine.api.extensions.aaa.Authn > ovirt.engi= ne.aaa.authn.profile.name =3D siee > ovirt.engine.aaa.authn.authz.plu= gin =3D siee-local-authz > config.profile.file.1 =3D /etc/ovirt-engin= e/aaa/siee.properties > > */etc/ovirt-engine/extensions.d/siee= -local-authz.properties*: > > ovirt.engine.extension.name =3D = siee-local-authz > ovirt.engine.extension.bindings.method =3D jbossmo= dule > ovirt.engine.extension.binding.jbossmodule.module =3D > = org.ovirt.engine-extensions.aaa.ldap > ovirt.engine.extension.binding= .jbossmodule.class =3D > org.ovirt.engineextensions.aaa.ldap.AuthzExt= ension > ovirt.engine.extension.provides =3D org.ovirt.engine.api.ext= ensions.aaa.Authz > config.profile.file.1 =3D /etc/ovirt-engine/aaa/s= iee.properties > > */etc/ovirt-engine/aaa/siee.properties*:<br= >> > include =3D <ad.properties> > > # >= # Active directory domain name. > # > vars.domain =3D siee.loc= al > > # > # Search user and its password. > # = > vars.user =3D searcher@${global:vars.domain} > vars.password =3D= xxxx > > # > # Optional DNS servers, if enterprise &= gt; # DNS server cannot resolve the domain srvrecord. > # > #va= rs.dns =3D dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain}<= br>> > pool.default.serverset.type =3D srvrecord > pool.def= ault.serverset.srvrecord.domain =3D ${global:vars.domain} > pool.defa= ult.auth.simple.bindDN =3D ${global:vars.user} > pool.default.auth.si= mple.password =3D ${global:vars.password} > > # Uncomment if u= sing custom DNS > #pool.default.serverset.srvrecord.jndi-properties.j= ava.naming.provider.url > =3D ${global:vars.dns} > #pool.defaul= t.socketfactory.resolver.uRL =3D ${global:vars.dns} > > # Crea= te keystore, import certificate chain and uncomment > # if using ssl/= tls. > #pool.default.ssl.startTLS =3D true > #pool.default.ssl.= truststore.file =3D > ${local:_basedir}/${global:vars.domain}.jks = > #pool.default.ssl.truststore.password =3D changeit <div> </div>Y= ou should enable SSL for production use... as you do not want passwords to = be transmitted in clear. Not sure how you install ssl on the samba ldap.= .. but once you do, follow the README instructions[1] <div> </div>[1]= http://gerrit.ovirt.org/gitweb?p=3Dovirt-engine-extension-aaa-ldap.git;a= =3Dblob;f=3DREADME;hb=3DHEAD#l141 <div> </div>> > */etc/krb= 5.conf*: <div> </div>You are not using kerberos, so there is no reaso= n to configure it for setup to work. <div> </div>> > [loggi= ng] >  default =3D FILE:/var/log/krb5libs.log >  kdc = =3D FILE:/var/log/krb5kdc.log >  admin_server =3D FILE:/var/log/= kadmind.log > > [libdefaults] >  default_realm =3D = SIEE.LOCAL >  dns_lookup_realm =3D true >  dns_lookup= _kdc =3D true >  ticket_lifetime =3D 24h >  renew_lif= etime =3D 7d >  forwardable =3D no >  default_tkt_enc= types =3D arcfour-hmac-md5 >  udp_preference_limit =3D 1 >= > #[realms] > > #[domain_realm] > # .siee.local = =3D SIEE.LOCAL > # siee.local =3D SIEE.LOCAL > > &gt= ; Many thanks again to everybody, > > Juanjo. > >= On Tue, Dec 9, 2014 at 5:31 PM, Alon Bar-Lev <alonbl(a)redhat.com> wro= te: > > > > > > > ----- Original Message = ----- > > > From: "Juan Jose" <jj197005(a)gmail.com> &gt= ; > > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" = < > > yzaslavs(a)redhat.com> > > > Sent: Tuesday, = December 9, 2014 5:42:56 PM > > > Subject: Re: [ovirt-users] Ad= ding domain to oVirt to 3.5 issue > > > > > > Hello= Alon, > > > > > > In my firsts e-mails I had alrea= dy said that I have an emulation of AD > > > based on Samba 4. = I have tested the last version ov > > > ovirt-engine-extension-= aaa-ldap package and I think the problem is the > > same > &= gt; > although the error is "User is not authorized to perform this acti= on". > > > > > > I attach the enginle.log. > = > > > USER_NOT_AUTHORIZED_TO_PERFORM_ACTION means user is not s= uperuser or can > > manage objects as far as I know. > ><= br>> > I see siee0(a)siee.local is trying to login which is CN=3Dsiee0<= br>> > siee0,CN=3DUsers,DC=3Dsiee,DC=3Dlocal > > > &gt= ; Login succeeds. > > > > I do not see any groups it belo= ngs to. > > > > Are you sure you added this user role wit= hin the webadmin or that user > > belongs to groups that were adde= d to engine with such roles? > > > > > > > &g= t; In case that the new oVirt version 3.5 doesn't work with an AD emulation= > > > based on Samba 4, is it possible to do user authenticati= on with an > > OpenLDAP > > > directly with this 3.5 v= ersion?, if it is so, could you give me the link > > to > &g= t; > the documentation to configure OpenLDAP authentication? > &gt= ; > > Sure, just use the > > /usr/share/ovirt-engine-exte= nsion-aaa-ldap/examples/simple copy recursive > > into /etc/ovirt-= engine, then modify /etc/ovirt-engine/aaa/ldap1.properties > > set= vars.server, vars.user, vars.password. > > > > Until 3.5= .1 you should also > > /etc/ovirt-engine/extensions.d/domain1*.pro= perties and replace ../aaa to > > /etc/ovirt-engine/aaa > &g= t; > > > > > Many thanks in advanced, > > &gt= ; > > > Juanjo. > > > > > > On Tue, Dec= 9, 2014 at 3:16 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote: > = > > > > > > > > > > > > > &= gt; ----- Original Message ----- > > > > > From: "Alon Ba= r-Lev" <alonbl(a)redhat.com> > > > > > To: "Juan Jose= " <jj197005(a)gmail.com> > > > > > Cc: "users" <us= ers(a)ovirt.org> > > > > > Sent: Tuesday, December 9, 20= 14 3:59:33 PM > > > > > Subject: Re: [ovirt-users] Adding= domain to oVirt to 3.5 issue > > > > > > > >= > > We start over... > > > > > > > > &= gt; > This is not active directory... it is samba. > > > &gt= ; > > > > > > Attribute(name=3DvendorName, values=3D{'= Samba Team (http://samba.org)'}) > > > > > > > &= gt; > > Only now I realized this, maybe you mentioned it earlier not = sure. > > > > > > > > > > Of course thi= s was never tested, so probably not working. > > > > ><br= >> > > > > I see that samba does not return a list of extend= ed operations, I > > will > > > > > workaround t= his and we can see what's else differ from active > > directory.<b= r>> > > > > > > > Can you please checkout the fo= llowing rpm[1]? > > > > > > > > [1] > &= gt; > > > > http://jenkins.ovirt.org/job/ovirt-engine-extens= ion-aaa-ldap_master_create-rpms-el6-x86_64_merged/ > > > ><b= r>> > > > > > <div> </div> --------------= ---------------- <div> </div>________________________________________= _______ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/= mailman/listinfo/users <div> </div> End of Users Digest, Vol 39, I= ssue 50 ************************************* </div><div> </div></= div></body></html> ------=_Part_8758566_407473350.1418224697280--

1 0

Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
by Alon Bar-Lev 10 Dec '14

10 Dec '14

----- Original Message ----- > From: "Juan Jose" <jj197005(a)gmail.com> > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" <yzaslavs(a)redhat.com> > Sent: Wednesday, December 10, 2014 12:30:34 PM > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue > > Hello Alon and Yair, > > Many thanks for your help, finally It works properly. My problem, after > last Alon indications was that my user "Juanjo" was defined with SuperUser > role in the previous domain configuration. I have loggen in with admin user > from internal and I have removed old configuration and I have configured my > user "Juanjo" with all administrators roles in folder "Permission" and I > can log in in administration portal without problems and it works properly. > > My final configuration I have is an emulated *AD based on Samba 4* and the > final configuration files are: Good! So samba is not emulating active directory entirely :) But good to know it is working. Please also checkout group membership. > ovirt-engine-extension-aaa-ldap.noarch > 1.0.1-0.0.master.20141209141731.git0437701.el6 this fix for samba ad will be released in 1.0.1. > > */etc/ovirt-engine/extensions.d/siee-local-authn.properties*: > > ovirt.engine.extension.name = siee-local-authn > ovirt.engine.extension.bindings.method = jbossmodule > ovirt.engine.extension.binding.jbossmodule.module = > org.ovirt.engine-extensions.aaa.ldap > ovirt.engine.extension.binding.jbossmodule.class = > org.ovirt.engineextensions.aaa.ldap.AuthnExtension > ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn > ovirt.engine.aaa.authn.profile.name = siee > ovirt.engine.aaa.authn.authz.plugin = siee-local-authz > config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties > > */etc/ovirt-engine/extensions.d/siee-local-authz.properties*: > > ovirt.engine.extension.name = siee-local-authz > ovirt.engine.extension.bindings.method = jbossmodule > ovirt.engine.extension.binding.jbossmodule.module = > org.ovirt.engine-extensions.aaa.ldap > ovirt.engine.extension.binding.jbossmodule.class = > org.ovirt.engineextensions.aaa.ldap.AuthzExtension > ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz > config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties > > */etc/ovirt-engine/aaa/siee.properties*: > > include = <ad.properties> > > # > # Active directory domain name. > # > vars.domain = siee.local > > # > # Search user and its password. > # > vars.user = searcher@${global:vars.domain} > vars.password = xxxx > > # > # Optional DNS servers, if enterprise > # DNS server cannot resolve the domain srvrecord. > # > #vars.dns = dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain} > > pool.default.serverset.type = srvrecord > pool.default.serverset.srvrecord.domain = ${global:vars.domain} > pool.default.auth.simple.bindDN = ${global:vars.user} > pool.default.auth.simple.password = ${global:vars.password} > > # Uncomment if using custom DNS > #pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url > = ${global:vars.dns} > #pool.default.socketfactory.resolver.uRL = ${global:vars.dns} > > # Create keystore, import certificate chain and uncomment > # if using ssl/tls. > #pool.default.ssl.startTLS = true > #pool.default.ssl.truststore.file = > ${local:_basedir}/${global:vars.domain}.jks > #pool.default.ssl.truststore.password = changeit You should enable SSL for production use... as you do not want passwords to be transmitted in clear. Not sure how you install ssl on the samba ldap... but once you do, follow the README instructions[1] [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob… > > */etc/krb5.conf*: You are not using kerberos, so there is no reason to configure it for setup to work. > > [logging] > default = FILE:/var/log/krb5libs.log > kdc = FILE:/var/log/krb5kdc.log > admin_server = FILE:/var/log/kadmind.log > > [libdefaults] > default_realm = SIEE.LOCAL > dns_lookup_realm = true > dns_lookup_kdc = true > ticket_lifetime = 24h > renew_lifetime = 7d > forwardable = no > default_tkt_enctypes = arcfour-hmac-md5 > udp_preference_limit = 1 > > #[realms] > > #[domain_realm] > # .siee.local = SIEE.LOCAL > # siee.local = SIEE.LOCAL > > > Many thanks again to everybody, > > Juanjo. > > On Tue, Dec 9, 2014 at 5:31 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote: > > > > > > > ----- Original Message ----- > > > From: "Juan Jose" <jj197005(a)gmail.com> > > > To: "Alon Bar-Lev" <alonbl(a)redhat.com>, "Yair Zaslavsky" < > > yzaslavs(a)redhat.com> > > > Sent: Tuesday, December 9, 2014 5:42:56 PM > > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue > > > > > > Hello Alon, > > > > > > In my firsts e-mails I had already said that I have an emulation of AD > > > based on Samba 4. I have tested the last version ov > > > ovirt-engine-extension-aaa-ldap package and I think the problem is the > > same > > > although the error is "User is not authorized to perform this action". > > > > > > I attach the enginle.log. > > > > USER_NOT_AUTHORIZED_TO_PERFORM_ACTION means user is not superuser or can > > manage objects as far as I know. > > > > I see siee0(a)siee.local is trying to login which is CN=siee0 > > siee0,CN=Users,DC=siee,DC=local > > > > Login succeeds. > > > > I do not see any groups it belongs to. > > > > Are you sure you added this user role within the webadmin or that user > > belongs to groups that were added to engine with such roles? > > > > > > > > In case that the new oVirt version 3.5 doesn't work with an AD emulation > > > based on Samba 4, is it possible to do user authentication with an > > OpenLDAP > > > directly with this 3.5 version?, if it is so, could you give me the link > > to > > > the documentation to configure OpenLDAP authentication? > > > > Sure, just use the > > /usr/share/ovirt-engine-extension-aaa-ldap/examples/simple copy recursive > > into /etc/ovirt-engine, then modify /etc/ovirt-engine/aaa/ldap1.properties > > set vars.server, vars.user, vars.password. > > > > Until 3.5.1 you should also > > /etc/ovirt-engine/extensions.d/domain1*.properties and replace ../aaa to > > /etc/ovirt-engine/aaa > > > > > > > Many thanks in advanced, > > > > > > Juanjo. > > > > > > On Tue, Dec 9, 2014 at 3:16 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote: > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Alon Bar-Lev" <alonbl(a)redhat.com> > > > > > To: "Juan Jose" <jj197005(a)gmail.com> > > > > > Cc: "users" <users(a)ovirt.org> > > > > > Sent: Tuesday, December 9, 2014 3:59:33 PM > > > > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue > > > > > > > > > > We start over... > > > > > > > > > > This is not active directory... it is samba. > > > > > > > > > > Attribute(name=vendorName, values={'Samba Team (http://samba.org)'}) > > > > > > > > > > Only now I realized this, maybe you mentioned it earlier not sure. > > > > > > > > > > Of course this was never tested, so probably not working. > > > > > > > > > > I see that samba does not return a list of extended operations, I > > will > > > > > workaround this and we can see what's else differ from active > > directory. > > > > > > > > Can you please checkout the following rpm[1]? > > > > > > > > [1] > > > > > > http://jenkins.ovirt.org/job/ovirt-engine-extension-aaa-ldap_master_create-… > > > > > > > > > >

1 0

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status
by Sandro Bonazzola 10 Dec '14

10 Dec '14

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. ACTION: Being so near to winter's holidays we need to discuss the new tentative date for RC in today sync meeting. The bug tracker [1] shows 2 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile 1168709 virt NEW Hosted Engine VM is listed as paused after upgrading from 3.4.4 to 3.5.1 snapshot In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: assignee please provide ETA on above blockers Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 63 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 42 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

[QE][ACTION REQUIRED] oVirt 3.6.0 status
by Sandro Bonazzola 10 Dec '14

10 Dec '14

Hi, Release criteria discussion has been closed and wiki has been updated accordingly by Brian [1][2]. Release management for 3.6.0 [3] has been updated with the accepted changes in release criteria. ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [4] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 21: 2014-12-09 (RELEASED) Fedora 22: no earlier than 2015-05-19 Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 Two different proposals have been made about above scheduling [5]: 1) extend the cycle to 10 months for allowing to include a large feature set 2) reduce the cycle to less than 6 months and split features over 3.6 and 3.7 and we can also add 3) keep current 6 months cycle The tracker bug for 3.6.0 [6] currently shows no blockers. There are 460 bugs [7] targeted to 3.6.0. Excluding node and documentation bugs we have 436 bugs [8] targeted to 3.6.0. [1] http://www.ovirt.org/Release_Criteria_Template [2] http://www.ovirt.org/Release_process [3] http://www.ovirt.org/OVirt_3.6_Release_Management [4] http://goo.gl/9X3G49 [5] http://lists.ovirt.org/pipermail/users/2014-November/028875.html [6] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [7] http://goo.gl/zwkF3r [8] http://goo.gl/ZbUiMc -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

3.5 hosted engine: 2nd host Cannot acquire bridge address
by Robert Story 10 Dec '14

10 Dec '14

--Sig_/LN2bw8TMIqS9=ZENrf7wXWT Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable I've got a hosted engine up and running on a freshly installed 3.5 host (CentOS 6.6), and I'm tyying to add a second host. The install fails trying to configure the ovirtmgmt bridge: [ INFO ] Updating hosted-engine configuration [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ ERROR ] Failed to execute stage 'Closing up': Cannot acquire bridge addre= ss =46rom the setup log: 2014-11-05 19:35:00 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad= d_host add_host._closeup:434 Updating engine's management network to be vla= nned 2014-11-05 19:35:02 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engi= ne.add_host add_host._closeup:445 Adding the host to the cluster 2014-11-05= 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.add_host add= _host._getIPAddress:184 Acquiring nic address 2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad= d_host plugin.executeRaw:785 execute: ('/sbin/ip', 'addr', 'show', 'eth1.79= '), executable=3D'None', cwd=3D'None', env=3DNone 2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad= d_host plugin.executeRaw:803 execute-result: ('/sbin/ip', 'addr', 'show', '= eth1.79'), rc=3D0 2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad= d_host plugin.execute:861 execute-output: ('/sbin/ip', 'addr', 'show', 'eth= 1.79') stdout: 4: eth1.79@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue s= tate UP link/ether 00:26:9e:0b:31:e5 brd ff:ff:ff:ff:ff:ff inet 10.69.79.32/24 brd 10.69.79.255 scope global eth1.79 inet6 fe80::226:9eff:fe0b:31e5/64 scope link valid_lft forever preferred_lft forever 2014-11-05 19:35:03 DEBUG otopi.plugins.ovirt_hosted_engine_setup.engine.ad= d_host plugin.execute:866 execute-output: ('/sbin/ip', 'addr', 'show', 'eth= 1.79') stderr: 2014-11-05 19:35:03 DEBUG otopi.context context._executeMethod:152 method e= xception Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _e= xecuteMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hoste= d-engine-setup/engine/add_host.py", line 485, in _closeup address=3Dself._getIPAddress(), File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hoste= d-engine-setup/engine/add_host.py", line 199, in _getIPAddress raise RuntimeError(_('Cannot acquire bridge address')) RuntimeError: Cannot acquire bridge address 2014-11-05 19:35:03 ERROR otopi.context context._executeMethod:161 Failed t= o execute stage 'Closing up': Cannot acquire bridge address The install on the first host worked fine on a VLAN (eth1.79). Robert --=20 Senior Software Engineer @ Parsons --Sig_/LN2bw8TMIqS9=ZENrf7wXWT Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlRax2cACgkQ7/fVLLY1mngpJwCeKPtZFsr41sAJVHV6LIeK7a35 SGIAn0T47ampbAbCzcOUeUArVCYLAtzn =YGdM -----END PGP SIGNATURE----- --Sig_/LN2bw8TMIqS9=ZENrf7wXWT--

4 8

Fwd: Fwd: run ovirt-shell script like background job - problem
by Grzegorz Szypa 10 Dec '14

10 Dec '14

Problem is solved. It must be install this: yum update packages not like this rpm -i *.rpm ---------- Forwarded message ---------- From: Grzegorz Szypa <grzegorz.szypa(a)gmail.com> Date: 2014-12-09 20:42 GMT+01:00 Subject: Re: [ovirt-users] Fwd: run ovirt-shell script like background job - problem To: Juan Hernández <jhernand(a)redhat.com> So i have a question: When i install: rpm -i ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch.rpm ovirt-engine-cli-3.5.0.5-1.el6.noarch.rpm i got error conflict with current package ovirt-engine-3.4.x It was all-in-one instalation in one server. 2014-12-09 10:32 GMT+01:00 Juan Hernández <jhernand(a)redhat.com>: > On 12/08/2014 08:05 PM, Grzegorz Szypa wrote: > > So, i have a question. > > > > Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible in ovirt-engine-3.4? > > > > Can install ovirt-engine-cli-3.5 on ovirt-engine-cli-3.4 and using him > > with landscape based on ovirt 3.4 ?? > > > > Yes, versions 3.5.x of ovirt-engine-cli and ovirt-engine-sdk-python (you > will need both) are compatible with version 3.4 of the engine. > > > 2014-12-07 17:33 GMT+01:00 Juan Hernández <jhernand(a)redhat.com > > <mailto:jhernand@redhat.com>>: > > > > On 12/07/2014 05:05 PM, Grzegorz Szypa wrote: > > > Hi, > > > > > > I have a problem with running ovirt-shell script, that it starting > > VMs. > > > In dialog mode it's fine, but in background no :( > > > > > > Example script: > > > ovirt-shell -E 'action vm WinSrv2012r2 start' > > > > > > I start this job in cron as root. > > > > > > > > > Have somebody idea?? > > > > > > -- > > > G.Sz. > > > > > > > We used to have bug that made ovirt-shell fail when there wasn't a > tty > > available (like when running from cron): > > > > ovirt-shell cannot run in cron (/dev/tty missing) > > https://bugzilla.redhat.com/1119412 > > > > That was fixed in version 3.5.0.2, so make sure that you have at > least > > that version. > > > > If you still have problems please share the output of the ovirt-shell > > command. > > > > -- > > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > > 3ºD, 28016 Madrid, Spain > > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat > > S.L. > > > > > > > > > > -- > > G.Sz. > > > > > > > > -- > > G.Sz. > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > 3ºD, 28016 Madrid, Spain > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. > -- G.Sz. -- G.Sz.

1 0

yum update command is failed
by Ilan Hirsfeld 09 Dec '14

09 Dec '14

Hi, My name's Ilan and I'm a new user. I installed CentOS 7 64 bit with VMware Player as guest and try 'yum update' to get newest application and get error as mentioned below. It seem me the installation determines the IP address as loopback and I don't know how enable it as real/virtual. I copy & paste the findings from Linux and Windows. Any help will be blessed. Regards, Ilan. [root@localhost Desktop]# yum update Loaded plugins: fastestmirror, langpacks Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error" One of the configured repositories failed (Unknown), and yum doesn't have enough cached data to continue. At this point the only safe thing yum can do is fail. There are a few ways to work "fix" this: 1. Contact the upstream for the repository and get them to fix the problem. 2. Reconfigure the baseurl/etc. for the repository, to point to a working upstream. This is most often useful if you are using a newer distribution release than is supported by the repository (and the packages for the previous distribution release still work). 3. Disable the repository, so yum won't use it by default. Yum will then just ignore the repository until you permanently enable it again or use --enablerepo for temporary usage: yum-config-manager --disable <repoid> 4. Configure the failing repository to be skipped, if it is unavailable. Note that yum will try to contact the repo. when it runs most commands, so will have to try and fail each time (and thus. yum will be be much slower). If it is a very temporary problem though, this is often a nice compromise: yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true Cannot find a valid baseurl for repo: base/7/x86_64 [root@localhost Desktop]# exit exit [bih016@localhost Desktop]$ ping google.com ping: unknown host google.com [bih016@localhost Desktop]$ ifconfig -a eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:0c:29:d9:2b:57 txqueuelen 1000 (Ethernet) RX packets 18 bytes 1080 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 386 bytes 33548 (32.7 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 386 bytes 33548 (32.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [bih016@localhost Desktop]$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface cat /etc/sysconfig/network-scripts/ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface cat /etc/*-release CentOS Linux release 7.0.1406 (Core) NAME="CentOS Linux" VERSION="7 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="7" PRETTY_NAME="CentOS Linux 7 (Core)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:7" HOME_URL="https://www.centos.org/" BUG_REPORT_URL="https://bugs.centos.org/" CentOS Linux release 7.0.1406 (Core) CentOS Linux release 7.0.1406 (Core) uname -a Linux localhost.localdomain 3.10.0-123.el7.x86_64 #1 SMP Mon Jun 30 12:09:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux cat /proc/version Linux version 3.10.0-123.el7.x86_64 (builder(a)kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Mon Jun 30 12:09:22 UTC 2014 C:\Users\PC User>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : PCUser-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : EC-A8-6B-FA-3D-15 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::91aa:14b3:7d79:9b8b%11(Preferred) IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:15:01 Lease Expires . . . . . . . . . . : יום שלישי 09 דצמבר 2014 15:15:01 Default Gateway . . . . . . . . . : 10.0.0.138 DHCP Server . . . . . . . . . . . : 10.0.0.138 DHCPv6 IAID . . . . . . . . . . . : 250390635 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-09-29-61-EC-A8-6B-FA-3D-15 DNS Servers . . . . . . . . . . . : 10.0.0.138 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : localdomain Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::148:a743:e971:82b8%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:15:05 Lease Expires . . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:45:05 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 192.168.254.254 DHCPv6 IAID . . . . . . . . . . . : 335564886 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-09-29-61-EC-A8-6B-FA-3D-15 DNS Servers . . . . . . . . . . . : 192.168.254.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : localdomain Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f1ec:6b17:d46d:d130%16(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.142.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:15:05 Lease Expires . . . . . . . . . . : יום שלישי 09 דצמבר 2014 14:45:05 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 192.168.142.254 DHCPv6 IAID . . . . . . . . . . . : 352342102 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-09-29-61-EC-A8-6B-FA-3D-15 DNS Servers . . . . . . . . . . . : 192.168.142.2 Primary WINS Server . . . . . . . : 192.168.142.2 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.{DD439A41-571B-47F9-8B4A-374946CF59CA}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.localdomain: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : localdomain Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:109a:1457:f5ff:fffc(Preferred) Link-local IPv6 Address . . . . . : fe80::109a:1457:f5ff:fffc%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

3 3

Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
by Alon Bar-Lev 09 Dec '14

09 Dec '14

We start over... This is not active directory... it is samba. Attribute(name=vendorName, values={'Samba Team (http://samba.org)'}) Only now I realized this, maybe you mentioned it earlier not sure. Of course this was never tested, so probably not working. I see that samba does not return a list of extended operations, I will workaround this and we can see what's else differ from active directory. Thanks, Alon

1 1

Don't start vm
by Roman Nikolayevich Drovalev 09 Dec '14

09 Dec '14

Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME. --=_alternative 0072EDDF43257DA5_= Content-Type: text/plain; charset="US-ASCII" Hi, Please Help I normal stop my virtual mashine. But not start ! in the logs 2014-12-05 09:38:06,437 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-87) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM Cent is down with error. Exit message: ('Failed to get size for volume %s', u'fb8466c9-0867-4e73-8362-2c95eea89a83'). 2014-12-05 09:38:06,439 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-87) Running on vds during rerun failed vm: null 2014-12-05 09:38:06,447 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-87) VM Cent (d1ccb04d-bda8-42a2-bab6-7def2f8b2a00) is running in db and not running in VDS x3550m2down 2014-12-05 09:38:06,475 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-87) Rerun vm d1ccb04d-bda8-42a2-bab6-7def2f8b2a00. Called from vds x3550m2down 2014-12-05 09:38:06,482 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID: 86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c, Call Stack: null, Custom Event ID: -1, Message: Failed to run VM Cent on Host x3550m2down 2014-12-05 09:38:06,486 INFO [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-16) Lock Acquired to object EngineLock [exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM , sharedLocks= ] 2014-12-05 09:38:06,504 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (org.ovirt.thread.pool-8-thread-16) START, IsVmDuringInitiatingVDSCommand( vmId = d1ccb04d-bda8-42a2-bab6-7def2f8b2a00), log id: 2e257f81 2014-12-05 09:38:06,505 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (org.ovirt.thread.pool-8-thread-16) FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 2e257f81 2014-12-05 09:38:06,509 WARN [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-16) CanDoAction of action RunVm failed. Reasons:VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,SCHEDULING_NO_HOSTS 2014-12-05 09:38:06,510 INFO [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-16) Lock freed to object EngineLock [exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM , sharedLocks= ] 2014-12-05 09:38:06,539 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID: 86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c, Call Stack: null, Custom Event ID: -1, Message: Failed to run VM Cent (User: admin). 2014-12-05 09:38:06,548 INFO [org.ovirt.engine.core.bll.ProcessDownVmCommand] (org.ovirt.thread.pool-8-thread-27) [58fe3e35] Running command: ProcessDownVmCommand internal: true. What me do? Roman --=_alternative 0072EDDF43257DA5_= Content-Type: text/html; charset="US-ASCII" Hi, Please Help I normal stop my virtual mashine. But not start ! in the logs 2014-12-05 09:38:06,437 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-87) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM Cent is down with error. Exit message: ('Failed to get size for volume %s', u'fb8466c9-0867-4e73-8362-2c95eea89a83'). 2014-12-05 09:38:06,439 INFO  [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-87) Running on vds during rerun failed vm: null 2014-12-05 09:38:06,447 INFO  [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-87) VM Cent (d1ccb04d-bda8-42a2-bab6-7def2f8b2a00) is running in db and not running in VDS x3550m2down 2014-12-05 09:38:06,475 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-87) Rerun vm d1ccb04d-bda8-42a2-bab6-7def2f8b2a00. Called from vds x3550m2down 2014-12-05 09:38:06,482 WARN  [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID: 86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c, Call Stack: null, Custom Event ID: -1, Message: Failed to run VM Cent on Host x3550m2down 2014-12-05 09:38:06,486 INFO  [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-16) Lock Acquired to object EngineLock [exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM , sharedLocks= ] 2014-12-05 09:38:06,504 INFO  [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (org.ovirt.thread.pool-8-thread-16) START, IsVmDuringInitiatingVDSCommand( vmId = d1ccb04d-bda8-42a2-bab6-7def2f8b2a00), log id: 2e257f81 2014-12-05 09:38:06,505 INFO  [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (org.ovirt.thread.pool-8-thread-16) FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 2e257f81 2014-12-05 09:38:06,509 WARN  [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-16) CanDoAction of action RunVm failed. Reasons:VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,VAR__ACTION__RUN,VAR__TYPE__VM,SCHEDULING_NO_HOSTS 2014-12-05 09:38:06,510 INFO  [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-16) Lock freed to object EngineLock [exclusiveLocks= key: d1ccb04d-bda8-42a2-bab6-7def2f8b2a00 value: VM , sharedLocks= ] 2014-12-05 09:38:06,539 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-16) Correlation ID: 2f3d1469, Job ID: 86d62fc3-f2d3-48f1-a5b3-d2abd0f84d6c, Call Stack: null, Custom Event ID: -1, Message: Failed to run VM Cent (User: admin). 2014-12-05 09:38:06,548 INFO  [org.ovirt.engine.core.bll.ProcessDownVmCommand] (org.ovirt.thread.pool-8-thread-27) [58fe3e35] Running command: ProcessDownVmCommand internal: true. What me do?  Roman --=_alternative 0072EDDF43257DA5_=--

3 3

Fwd: run ovirt-shell script like background job - problem
by Grzegorz Szypa 09 Dec '14

09 Dec '14

So, i have a question. Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible in ovirt-engine-3.4? Can install ovirt-engine-cli-3.5 on ovirt-engine-cli-3.4 and using him with landscape based on ovirt 3.4 ?? 2014-12-07 17:33 GMT+01:00 Juan Hernández <jhernand(a)redhat.com>: > On 12/07/2014 05:05 PM, Grzegorz Szypa wrote: > > Hi, > > > > I have a problem with running ovirt-shell script, that it starting VMs. > > In dialog mode it's fine, but in background no :( > > > > Example script: > > ovirt-shell -E 'action vm WinSrv2012r2 start' > > > > I start this job in cron as root. > > > > > > Have somebody idea?? > > > > -- > > G.Sz. > > > > We used to have bug that made ovirt-shell fail when there wasn't a tty > available (like when running from cron): > > ovirt-shell cannot run in cron (/dev/tty missing) > https://bugzilla.redhat.com/1119412 > > That was fixed in version 3.5.0.2, so make sure that you have at least > that version. > > If you still have problems please share the output of the ovirt-shell > command. > > -- > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > 3ºD, 28016 Madrid, Spain > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. > -- G.Sz. -- G.Sz.

2 1

RedHat 7 Install Ovirt Fails with No package ovirt-engine available.
by Tony 09 Dec '14

09 Dec '14

Hi I'm new to the users group. I have redhat 7 installed and ceph working perfectly and now I wanted to install ovirt and followed the instructions from the ovirt website and all I get is this message below. yum -y install ovirt-engine Loaded plugins: langpacks, priorities, product-id, subscription-manager No package ovirt-engine available. Error: Nothing to do Fails. I followed the instructions and fails every time.

4 3

Re: [ovirt-users] ssd cache
by Ernest Beinrohr 09 Dec '14

09 Dec '14

This is a multi-part message in MIME format. --------------050302090303030802060601 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Dňa 09.12.2014 o 03:57 yao xu napísal(a): > do you use iscsi ? > Yes, the storage present itselft as iscsi to ovirt. The tgtd iscsi target which runs on rhel7 does NOT know about the cache, it simply shares an LVM block device. I created the cache using this tutorial: http://blog.kylemanna.com/linux/2013/06/30/ssd-caching-using-dmcache-tutori… (or this, but you need a subscrition: https://access.redhat.com/solutions/912953 ) tgtd.conf: <target iqn.2014-05.sk.axonpro.sk:BigCachedPool> scsi_id STORAGE_BigCachedPool vendor_id AXONPRO product_id scsi-target-utils scsi_sn 42fbb7c1-99d4-4247-a55b-222e5abe13aa backing-store /dev/rhel/BigCachedPool incominguser ovirt xxxx </target> lvs: LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert BigCachedPool rhel Cwi-aoC--- 21,00t lv_cache [BigCachedPool_corig] lv_cache rhel Cwi-a-C--- 100,00g -- Ernest Beinrohr, AXON PRO Ing <http://www.beinrohr.sk/ing.php>, RHCE <http://www.beinrohr.sk/rhce.php>, RHCVA <http://www.beinrohr.sk/rhce.php>, LPIC <http://www.beinrohr.sk/lpic.php>, VCA <http://www.beinrohr.sk/vca.php>, +421-2-62410360 +421-903-482603 --------------050302090303030802060601 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type"> </head> <body text="#000000" bgcolor="#FFFFFF"> <div class="moz-cite-prefix">Dňa 09.12.2014 o 03:57 yao xu napísal(a): </div> <blockquote cite="mid:CAFEhV74MugY5YCTTaBfsMbU_0B6gWvU5zDeh9bGRnukvJscAFw@mail.gmail.com" type="cite"> <div dir="ltr">do you use iscsi ? </div> </blockquote> Yes, the storage present itselft as iscsi to ovirt. The tgtd iscsi target which runs on rhel7 does NOT know about the cache, it simply shares an LVM block device. I created the cache using this tutorial: <a class="moz-txt-link-freetext" href="http://blog.kylemanna.com/linux/2013/06/30/ssd-caching-using-dmcache-tutori…">http://blog.kylemanna.com/linux/2013/06/30/ssd-caching-using-dmcache-tutori…</a> (or this, but you need a subscrition: <a class="moz-txt-link-freetext" href="https://access.redhat.com/solutions/912953">https://access.redhat.com/solutions/912953</a> ) tgtd.conf: <tt><target iqn.2014-05.sk.axonpro.sk:BigCachedPool></tt><tt> </tt><tt> scsi_id STORAGE_BigCachedPool</tt><tt> </tt><tt> vendor_id AXONPRO</tt><tt> </tt><tt> product_id scsi-target-utils</tt><tt> </tt><tt> scsi_sn 42fbb7c1-99d4-4247-a55b-222e5abe13aa</tt><tt> </tt><tt> backing-store /dev/rhel/BigCachedPool</tt><tt> </tt><tt> incominguser ovirt xxxx</tt><tt> </tt><tt></target></tt><tt> </tt> lvs: <tt> LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert</tt><tt> </tt><tt> BigCachedPool rhel Cwi-aoC--- 21,00t lv_cache [BigCachedPool_corig]</tt><tt> </tt><tt> lv_cache rhel Cwi-a-C--- 100,00g</tt> <div class="moz-signature">-- <div id="oernii_footer" style="color: gray;"> Ernest Beinrohr, AXON PRO <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/ing.php">Ing</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/rhce.php">RHCE</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/rhce.php">RHCVA</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/lpic.php">LPIC</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/vca.php">VCA</a>, +421-2-62410360 +421-903-482603 </div> <img src="http://nojsstats.appspot.com/UA-44497096-1/email.beinrohr.sk" moz-do-not-send="true" height="1" width="1" border="0"> </div> </body> </html> --------------050302090303030802060601--

1 0

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 09 Dec '14

09 Dec '14

Hi, We were supposed to start composing oVirt 3.5.1 RC today *2014-12-09 08:00 UTC* from 3.5 branch. We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. Being so near to winter's holidays we need to discuss the new tentative date for RC in tomorrow sync meeting. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 65 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 44 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

JSON mapping exception
by Raul Laansoo 08 Dec '14

08 Dec '14

Hi. Is it somehow possible to manually recover engine from the following error, caused maybe by https://bugzilla.redhat.com/show_bug.cgi?id=1155084. oVirt 3.5 2014-12-08 23:24:41,922 ERROR [org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] (DefaultQuartzScheduler_Worker-40) Failed to invoke scheduled method invokeCallbackMethods: java.lang.reflect.InvocationTargetException at sun.reflect.GeneratedMethodAccessor100.invoke(Unknown Source) [:1.7.0_65] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.7.0_65] at java.lang.reflect.Method.invoke(Method.java:606) [rt.jar:1.7.0_65] at org.ovirt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:60) [scheduler.jar:] at org.quartz.core.JobRunShell.run(JobRunShell.java:213) [quartz.jar:] at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:557) [quartz.jar:] Caused by: org.apache.commons.lang.SerializationException: org.codehaus.jackson.map.JsonMappingException: Unexpected token (END_ARRAY), expected VALUE_STRING: need JSON String that contains type id (for subtype of java.util.Collection) at [Source: java.io.StringReader@6a4d8b78; line: 22, column: 22] (through reference chain: org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["parametersCurrentUser"]->org.ovirt.engine.core.common.businessentities.aaa.DbUser["groupNames"]) at org.ovirt.engine.core.utils.serialization.json.JsonObjectDeserializer.readJsonString(JsonObjectDeserializer.java:91) [utils.jar:] at org.ovirt.engine.core.utils.serialization.json.JsonObjectDeserializer.deserialize(JsonObjectDeserializer.java:60) [utils.jar:] at org.ovirt.engine.core.dao.CommandEntityDaoDbFacadeImpl.deserializeParameters(CommandEntityDaoDbFacadeImpl.java:97) [dal.jar:] at org.ovirt.engine.core.dao.CommandEntityDaoDbFacadeImpl.access$000(CommandEntityDaoDbFacadeImpl.java:21) [dal.jar:] at org.ovirt.engine.core.dao.CommandEntityDaoDbFacadeImpl$1.mapRow(CommandEntityDaoDbFacadeImpl.java:34) [dal.jar:] at org.ovirt.engine.core.dao.CommandEntityDaoDbFacadeImpl$1.mapRow(CommandEntityDaoDbFacadeImpl.java:23) [dal.jar:] at org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:92) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:1) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate$1.doInPreparedStatement(JdbcTemplate.java:649) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:587) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:637) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:666) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:706) [spring-jdbc.jar:3.1.1.RELEASE] at org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.executeCallInternal(PostgresDbEngineDialect.java:154) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.doExecute(PostgresDbEngineDialect.java:120) [dal.jar:] at org.springframework.jdbc.core.simple.SimpleJdbcCall.execute(SimpleJdbcCall.java:181) [spring-jdbc.jar:3.1.1.RELEASE] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:141) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeReadList(SimpleJdbcCallsHandler.java:103) [dal.jar:] at org.ovirt.engine.core.dao.DefaultReadDaoDbFacade.getAll(DefaultReadDaoDbFacade.java:77) [dal.jar:] at org.ovirt.engine.core.bll.tasks.CommandsCacheImpl.initializeCache(CommandsCacheImpl.java:30) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandsCacheImpl.keySet(CommandsCacheImpl.java:41) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandCoordinatorImpl.getCommandsWithCallBackEnabled(CommandCoordinatorImpl.java:130) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandExecutor.initCommandExecutor(CommandExecutor.java:119) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandExecutor.invokeCallbackMethods(CommandExecutor.java:57) [bll.jar:] ... 6 more Thank you. --- Raul

1 0

Re: [ovirt-users] Users Digest, Vol 39, Issue 38
by Nikolai Sednev 08 Dec '14

08 Dec '14

------=_Part_7746146_197691492.1418043545536 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi all, I was thinking of "booting from iSCSI SAN", which means you'll be using your LUN placed on storage in order to boot your host over the network. In this case you'll might configure your hosts HW to boot from iSCSI and then you'll won't need any HD on your HW. +adding more people to add their comments. Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Monday, December 8, 2014 11:22:27 AM Subject: Users Digest, Vol 39, Issue 38 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Re: is it possible to run ovirt node on Diskless HW? (Doron Fediuck) 2. Re: Storage Domain Issue (Koen Vanoppen) ---------------------------------------------------------------------- Message: 1 Date: Mon, 8 Dec 2014 02:01:50 -0500 (EST) From: Doron Fediuck <dfediuck(a)redhat.com> To: Arman Khalatyan <arm2arm(a)gmail.com> Cc: Ryan Barry <rbarry(a)redhat.com>, Fabian Deutsch <fdeutsch(a)redhat.com>, users <users(a)ovirt.org> Subject: Re: [ovirt-users] is it possible to run ovirt node on Diskless HW? Message-ID: <1172482552.12144827.1418022110582.JavaMail.zimbra(a)redhat.com> Content-Type: text/plain; charset=utf-8 For standard centos you may see other issues. For example, let's assume you have a single NIC (eth0). If you boot your host and then try to add it to the engine, the host deploy procedure will create try to create a management bridge for the VMs using eth0. At this point your host will freeze since your root FS will be disconnected while creating the bridge. I've done this ~6 years ago, and it required opening the initrd to handle the above issue, as well as adding the NIC driver and creating the bridge at this point. So it's not a trivial task but doable with some hacking. Doron ----- Original Message ----- > From: "Arman Khalatyan" <arm2arm(a)gmail.com> > To: "Doron Fediuck" <dfediuck(a)redhat.com> > Cc: "users" <users(a)ovirt.org>, "Fabian Deutsch" <fdeutsch(a)redhat.com>, "Ryan Barry" <rbarry(a)redhat.com>, "Tolik > Litovsky" <tlitovsk(a)redhat.com>, "Douglas Landgraf" <dougsland(a)redhat.com> > Sent: Sunday, December 7, 2014 7:38:19 PM > Subject: Re: [ovirt-users] is it possible to run ovirt node on Diskless HW? > > It is centos 6.6 standard one. > a. > > *********************************************************** > > Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut f?r > Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany > > *********************************************************** > > > On Sun, Dec 7, 2014 at 6:04 PM, Doron Fediuck <dfediuck(a)redhat.com> wrote: > > > > > > > ----- Original Message ----- > > > From: "Arman Khalatyan" <arm2arm(a)gmail.com> > > > To: "users" <users(a)ovirt.org> > > > Sent: Wednesday, December 3, 2014 6:50:09 PM > > > Subject: [ovirt-users] is it possible to run ovirt node on Diskless HW? > > > > > > Hello, > > > > > > Doing steps in: > > > > > https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/ht… > > > > > > I would like to know is some one succeeded to run the host on a diskless > > > machine? > > > i am using Centos6.6 node with ovirt 3.5. > > > Thanks, > > > Arman. > > > > > > > > > > > > > > > *********************************************************** > > > Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut f?r > > Astrophysik > > > Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany > > > *********************************************************** > > > > > > > Hi Arman, > > Are you working with ovirt node or standard CentOS? > > > > Note that ovirt node is different as it's works like a live cd- > > it runs from memory. In order to save some configurations (such > > as networking) the local disk is used. > > > ------------------------------ Message: 2 Date: Mon, 8 Dec 2014 10:22:18 +0100 From: Koen Vanoppen <vanoppen.koen(a)gmail.com> To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: Re: [ovirt-users] Storage Domain Issue Message-ID: <CACfY+MaPY9opHykNc7hmM4Wc0_HBuu6_fyi7wPMWP4RSCe6xYQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" some more errors: Thread-19::DEBUG::2014-12-08 10:20:02,700::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgck --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' f130d166-546e-4905-8b8f-55a1c1dd2e4f (cwd None) Thread-20::DEBUG::2014-12-08 10:20:02,817::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgck --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' eb912657-8a8c-4173-9d24-92d2b09a773c (cwd None) Thread-20::DEBUG::2014-12-08 10:20:03,388::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name eb912657-8a8c-4173-9d24-92d2b09a773c (cwd None) Thread-17::ERROR::2014-12-08 10:20:03,469::sdc::137::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-17::ERROR::2014-12-08 10:20:03,472::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-17::DEBUG::2014-12-08 10:20:03,482::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-17::DEBUG::2014-12-08 10:20:03,572::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-17::DEBUG::2014-12-08 10:20:03,631::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name f130d166-546e-4905-8b8f-55a1c1dd2e4f eb912657-8a8c-4173-9d24-92d2b09a773c (cwd None) Thread-14::ERROR::2014-12-08 10:20:05,785::task::866::Storage.TaskManager.Task::(_setError) Task=`ffaf5100-e833-4d29-ac5d-f6f7f8ce2b5d`::Unexpected error raise SecureError("Secured object is not in safe state") SecureError: Secured object is not in safe state Thread-14::ERROR::2014-12-08 10:20:05,797::dispatcher::79::Storage.Dispatcher::(wrapper) Secured object is not in safe state raise self.error SecureError: Secured object is not in safe state Thread-34::ERROR::2014-12-08 10:21:46,544::task::866::Storage.TaskManager.Task::(_setError) Task=`82940da7-10c1-42f6-afca-3c0ac00c1487`::Unexpected error raise SecureError("Secured object is not in safe state") SecureError: Secured object is not in safe state Thread-34::ERROR::2014-12-08 10:21:46,549::dispatcher::79::Storage.Dispatcher::(wrapper) Secured object is not in safe state raise self.error SecureError: Secured object is not in safe stat 2014-12-08 7:30 GMT+01:00 Koen Vanoppen <vanoppen.koen(a)gmail.com>: > Dear all, > > We have updated our hypervisors with yum. This included an update ov vdsm > also. We now are with these version: > vdsm-4.16.7-1.gitdb83943.el6.x86_64 > vdsm-python-4.16.7-1.gitdb83943.el6.noarch > vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el6.noarch > vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch > vdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarch > vdsm-jsonrpc-4.16.7-1.gitdb83943.el6.noarch > vdsm-cli-4.16.7-1.gitdb83943.el6.noarch > > And ever since these updates we experience BIG troubles with our fibre > connections. I've already update the brocade cards to the latest version. > This seemed to help, they already came back up and saw the storage domains > (before the brocade update, they didn't even see their storage domains). > But after a day or so, one of the hypersisors began to freak out again. > Coming up and going back down... Below you can find the errors: > > > Thread-821::ERROR::2014-12-08 > 07:10:33,190::task::866::Storage.TaskManager.Task::(_setError) > Task=`27cb9779-a8e9-4080-988d-9772c922710b`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-821::ERROR::2014-12-08 > 07:10:33,194::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-822::ERROR::2014-12-08 > 07:11:03,878::task::866::Storage.TaskManager.Task::(_setError) > Task=`30177931-68c0-420f-950f-da5b770fe35c`::Unexpected error > Thread-822::ERROR::2014-12-08 > 07:11:03,882::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Unknown pool id, pool not connected: > ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} > Thread-813::ERROR::2014-12-08 > 07:11:07,634::sdc::137::Storage.StorageDomainCache::(_findDomain) looking > for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-813::ERROR::2014-12-08 > 07:11:07,634::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) > looking for domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-813::DEBUG::2014-12-08 > 07:11:07,638::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-813::DEBUG::2014-12-08 > 07:11:07,835::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-813::ERROR::2014-12-08 > 07:11:07,896::spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersion) > Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece does not have > expected version 42 it is version 17 > Thread-813::ERROR::2014-12-08 > 07:11:07,903::task::866::Storage.TaskManager.Task::(_setError) > Task=`c434f325-5193-4236-a04d-2fee9ac095bc`::Unexpected error > Thread-813::ERROR::2014-12-08 > 07:11:07,946::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Wrong Master domain or its version: > 'SD=78d84adf-7274-4efe-a711-fbec31196ece, > pool=1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code': 324}} > Thread-823::ERROR::2014-12-08 > 07:11:43,993::task::866::Storage.TaskManager.Task::(_setError) > Task=`9abbccd9-88a7-4632-b350-f9af1f65bebd`::Unexpected error > Thread-823::ERROR::2014-12-08 > 07:11:43,998::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Unknown pool id, pool not connected: > ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} > Thread-823::ERROR::2014-12-08 > 07:11:44,003::task::866::Storage.TaskManager.Task::(_setError) > Task=`7ef1ac39-e7c2-4538-b30b-ab2fcefac01d`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:11:44,007::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08 > 07:11:44,133::task::866::Storage.TaskManager.Task::(_setError) > Task=`cc1ae82c-f3c4-4efa-9cd2-c62a27801e76`::Unexpected error > Thread-823::ERROR::2014-12-08 > 07:11:44,137::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Unknown pool id, pool not connected: > ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} > Thread-823::ERROR::2014-12-08 > 07:12:24,580::task::866::Storage.TaskManager.Task::(_setError) > Task=`9bcbb87d-3093-4894-879b-3fe2b09ef351`::Unexpected error > Thread-823::ERROR::2014-12-08 > 07:12:24,585::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Unknown pool id, pool not connected: > ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} > Thread-823::ERROR::2014-12-08 > 07:13:04,926::task::866::Storage.TaskManager.Task::(_setError) > Task=`8bdd0c1f-e681-4a8e-ad55-296c021389ed`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:13:04,931::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08 > 07:13:45,342::task::866::Storage.TaskManager.Task::(_setError) > Task=`160ea2a7-b6cb-4102-9df4-71ba87fd863e`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:13:45,346::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08 > 07:14:25,879::task::866::Storage.TaskManager.Task::(_setError) > Task=`985628db-8f48-44b5-8f61-631a922f7f71`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:14:25,883::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08 > 07:15:06,175::task::866::Storage.TaskManager.Task::(_setError) > Task=`ddca1c88-0565-41e8-bf0c-22eadcc75918`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:15:06,179::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08 > 07:15:46,585::task::866::Storage.TaskManager.Task::(_setError) > Task=`12bbded5-59ce-46d8-9e67-f48862a03606`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:15:46,589::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-814::ERROR::2014-12-08 > 07:16:08,619::sdc::137::Storage.StorageDomainCache::(_findDomain) looking > for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-814::ERROR::2014-12-08 > 07:16:08,619::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) > looking for domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-814::DEBUG::2014-12-08 > 07:16:08,624::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-814::DEBUG::2014-12-08 > 07:16:08,740::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-814::ERROR::2014-12-08 > 07:16:08,812::spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersion) > Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece does not have > expected version 42 it is version 17 > Thread-814::ERROR::2014-12-08 > 07:16:08,820::task::866::Storage.TaskManager.Task::(_setError) > Task=`5cdce5cd-6e6d-421e-bc2a-f999d8cbb056`::Unexpected error > Thread-814::ERROR::2014-12-08 > 07:16:08,865::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Wrong Master domain or its version: > 'SD=78d84adf-7274-4efe-a711-fbec31196ece, > pool=1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code': 324}} > Thread-815::ERROR::2014-12-08 > 07:16:09,471::sdc::137::Storage.StorageDomainCache::(_findDomain) looking > for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-815::ERROR::2014-12-08 > 07:16:09,472::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) > looking for domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-815::DEBUG::2014-12-08 > 07:16:09,476::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-815::DEBUG::2014-12-08 > 07:16:09,564::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-815::ERROR::2014-12-08 > 07:16:09,627::spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersion) > Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece does not have > expected version 42 it is version 17 > Thread-815::ERROR::2014-12-08 > 07:16:09,635::task::866::Storage.TaskManager.Task::(_setError) > Task=`abfa0fd0-04b3-4c65-b3d0-be18b085a65d`::Unexpected error > Thread-815::ERROR::2014-12-08 > 07:16:09,681::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': "Wrong Master domain or its version: > 'SD=78d84adf-7274-4efe-a711-fbec31196ece, > pool=1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code': 324}} > Thread-816::ERROR::2014-12-08 > 07:16:10,182::sdc::137::Storage.StorageDomainCache::(_findDomain) looking > for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-816::ERROR::2014-12-08 > 07:16:10,183::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) > looking for domain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-816::DEBUG::2014-12-08 > 07:16:10,187::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] > ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 > obtain_device_list_from_udev=0 filter = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = > 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-823::ERROR::2014-12-08 > 07:16:27,163::task::866::Storage.TaskManager.Task::(_setError) > Task=`9b0fd676-7941-40a7-a71e-0f1dee48a107`::Unexpected error > raise se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:16:27,168::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}} > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141208/2f754047/attach…> ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 38 ************************************* ------=_Part_7746146_197691492.1418043545536 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div>Hi all,</div><div>I was thinking of "booting from iSCSI SA= N", which means you'll be using your LUN placed on storage in order to boot= your host over the network. </div><div>In this case you'll might config= ure your hosts HW to boot from iSCSI and then you'll won't need any HD on y= our HW.</div><div>+adding more people to add their comments.</div><div> = </div><div> Thanks in advance. <div> </div= >Best regards, Nikolai ____________________ Nikolai Sednev Seni= or Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road,= Ra'anana, Israel 43501 <div> </div>Tel:       +972=   9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com<b= r>IRC: nsednev </div><div> </div><hr id=3D"zw= chr"><div style=3D"color:#000;font-weight:normal;font-style:normal;text-dec= oration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;">Fro= m: users-request(a)ovirt.org To: users(a)ovirt.org Sent: </= b>Monday, December 8, 2014 11:22:27 AM Subject: Users Digest, Vol= 39, Issue 38 <div> </div>Send Users mailing list submissions to &= nbsp;       users(a)ovirt.org <div> = </div>To subscribe or unsubscribe via the World Wide Web, visit  &n= bsp;      http://lists.ovirt.org/mailman/list= info/users or, via email, send a message with subject or body 'help' to<= br>        users-request(a)ovirt.org<= br><div> </div>You can reach the person managing the list at  &n= bsp;      users-owner(a)ovirt.org <div> <= /div>When replying, please edit your Subject line so it is more specific<br= >than "Re: Contents of Users digest..." <div> </div> Today's Topic= s: <div> </div>   1. Re:  is it possible to run ovirt = node on Diskless HW?       (Doron Fediuck)  =   2. Re:  Storage Domain Issue (Koen Vanoppen) <div> </div>= ----------------------------------------------------------------------<= br><div> </div>Message: 1 Date: Mon, 8 Dec 2014 02:01:50 -0500 (EST)<= br>From: Doron Fediuck <dfediuck(a)redhat.com> To: Arman Khalatyan &= lt;arm2arm(a)gmail.com> Cc: Ryan Barry <rbarry(a)redhat.com>, Fabia= n Deutsch         <fdeutsch@r= edhat.com>,        users <use= rs(a)ovirt.org> Subject: Re: [ovirt-users] is it possible to run ovirt = node on         Diskless HW? = Message-ID:         <11724825= 52.12144827.1418022110582.JavaMail.zimbra(a)redhat.com> Content-Type: t= ext/plain; charset=3Dutf-8 <div> </div>For standard centos you may se= e other issues. <div> </div>For example, let's assume you have a sing= le NIC (eth0). If you boot your host and then try to add it to the engin= e, the host deploy procedure will create try to create a management brid= ge for the VMs using eth0. At this point your host will freeze since yo= ur root FS will be disconnected while creating the bridge. <div> <= /div>I've done this ~6 years ago, and it required opening the initrd to han= dle the above issue, as well as adding the NIC driver and creating the b= ridge at this point. So it's not a trivial task but doable with some hac= king. <div> </div>Doron <div> </div>----- Original Message ----= - > From: "Arman Khalatyan" <arm2arm(a)gmail.com> > To: "Do= ron Fediuck" <dfediuck(a)redhat.com> > Cc: "users" <users@ovir= t.org>, "Fabian Deutsch" <fdeutsch(a)redhat.com>, "Ryan Barry" <r= barry(a)redhat.com>, "Tolik > Litovsky" <tlitovsk(a)redhat.com>,= "Douglas Landgraf" <dougsland(a)redhat.com> > Sent: Sunday, Dece= mber 7, 2014 7:38:19 PM > Subject: Re: [ovirt-users] is it possible t= o run ovirt node on Diskless HW? > > It is centos 6.6 standard= one. > a. > > *****************************************= ****************** > > Dr. Arman Khalatyan eScience -SuperComp= uting Leibniz-Institut f?r > Astrophysik Potsdam (AIP) An der Sternwa= rte 16, 14482 Potsdam, Germany > > ***************************= ******************************** > > > On Sun, Dec 7, 2= 014 at 6:04 PM, Doron Fediuck <dfediuck(a)redhat.com> wrote: > <b= r>> > > > > > ----- Original Message ----- > = > > From: "Arman Khalatyan" <arm2arm(a)gmail.com> > > &g= t; To: "users" <users(a)ovirt.org> > > > Sent: Wednesday, D= ecember 3, 2014 6:50:09 PM > > > Subject: [ovirt-users] is it p= ossible to run ovirt node on Diskless HW? > > > > > &g= t; Hello, > > > > > > Doing steps in: > > = > > > https://access.redhat.com/documentation/en-US/Red_Hat_Ent= erprise_Linux/6/html/Storage_Administration_Guide/diskless-nfs-config.html<= br>> > > > > > I would like to know is some one succee= ded to run the host on a diskless > > > machine? > > &= gt; i am using Centos6.6 node with ovirt 3.5. > > > Thanks, = > > > Arman. > > > > > > > > >= > > > > > > **************************************= ********************* > > > Dr. Arman Khalatyan eScience -Super= Computing Leibniz-Institut f?r > > Astrophysik > > > P= otsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany > > >= *********************************************************** > > &= gt; > > > > Hi Arman, > > Are you working with o= virt node or standard CentOS? > > > > Note that ovirt nod= e is different as it's works like a live cd- > > it runs from memo= ry. In order to save some configurations (such > > as networking) = the local disk is used. > > > <div> </div> -------= ----------------------- <div> </div>Message: 2 Date: Mon, 8 Dec 20= 14 10:22:18 +0100 From: Koen Vanoppen <vanoppen.koen(a)gmail.com><br= >To: "users(a)ovirt.org" <users(a)ovirt.org> Subject: Re: [ovirt-users= ] Storage Domain Issue Message-ID:      &nbs= p;  <CACfY+MaPY9opHykNc7hmM4Wc0_HBuu6_fyi7wPMWP4RSCe6xYQ(a)mail.= gmail.com> Content-Type: text/plain; charset=3D"utf-8" <div> </= div>some more errors: <div> </div>Thread-19::DEBUG::2014-12-08 10:= 20:02,700::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/l= vm vgck --config ' devices { preferred_names =3D ["^/dev/mapper/"] ignor= e_suspended_devices=3D1 write_cache_state=3D0 disable_after_error_count=3D3= obtain_device_list_from_udev=3D0 filter =3D [ '\''a|/dev/mapper/3600= 5076802810d489000000000000062|'\'', '\''r|.*|'\'' ] }  global { &nb= sp;locking_type=3D1  prioritise_write_locks=3D1  wait_for_locks= =3D1 use_lvmetad=3D0 }  backup {  retain_min =3D 50  reta= in_days =3D 0 } ' f130d166-546e-4905-8b8f-55a1c1dd2e4f (cwd None) Thr= ead-20::DEBUG::2014-12-08 10:20:02,817::lvm::288::Storage.Misc.excCmd::(= cmd) /usr/bin/sudo -n /sbin/lvm vgck --config ' devices { preferred_name= s =3D ["^/dev/mapper/"] ignore_suspended_devices=3D1 write_cache_state= =3D0 disable_after_error_count=3D3 obtain_device_list_from_udev=3D0 filt= er =3D [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper= /36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000= 000de|'\'', '\''r|.*|'\'' ] }  global {  locking_type=3D1 &nbs= p;prioritise_write_locks=3D1 wait_for_locks=3D1  use_lvmetad=3D0 } =  backup {  retain_min =3D 50  retain_days =3D 0 } ' eb912= 657-8a8c-4173-9d24-92d2b09a773c (cwd None) Thread-20::DEBUG::2014-12-08<= br>10:20:03,388::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /= sbin/lvm vgs --config ' devices { preferred_names =3D ["^/dev/mapper/"] = ignore_suspended_devices=3D1 write_cache_state=3D0 disable_after_error_coun= t=3D3 obtain_device_list_from_udev=3D0 filter =3D [ '\''a|/dev/mapper= /36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000= 000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' = ] }  global {  locking_type=3D1  prioritise_write_locks=3D1<= br>wait_for_locks=3D1  use_lvmetad=3D0 }  backup {  retain_m= in =3D 50  retain_days =3D 0 } ' --noheadings --units b --nosuffix = --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,ex= tent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_= count,pv_name eb912657-8a8c-4173-9d24-92d2b09a773c (cwd None) Thread-= 17::ERROR::2014-12-08 10:20:03,469::sdc::137::Storage.StorageDomainCache= ::(_findDomain) looking for unfetched domain 78d84adf-7274-4efe-a711-fbe= c31196ece Thread-17::ERROR::2014-12-08 10:20:03,472::sdc::154::Storag= e.StorageDomainCache::(_findUnfetchedDomain) looking for domain 78d84adf= -7274-4efe-a711-fbec31196ece Thread-17::DEBUG::2014-12-08 10:20:03,48= 2::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs -= -config ' devices { preferred_names =3D ["^/dev/mapper/"] ignore_suspend= ed_devices=3D1 write_cache_state=3D0 disable_after_error_count=3D3 obtai= n_device_list_from_udev=3D0 filter =3D [ '\''a|/dev/mapper/3600507680281= 0d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/map= per/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] }  glob= al {  locking_type=3D1  prioritise_write_locks=3D1 wait_for_lo= cks=3D1  use_lvmetad=3D0 }  backup {  retain_min =3D 50 &nbs= p;retain_days =3D 0 } ' --noheadings --units b --nosuffix --separator '|= ' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,exte= nt_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name<= br>78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-17::DEBUG::201= 4-12-08 10:20:03,572::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo= -n /sbin/lvm vgs --config ' devices { preferred_names =3D ["^/dev/mappe= r/"] ignore_suspended_devices=3D1 write_cache_state=3D0 disable_after_er= ror_count=3D3 obtain_device_list_from_udev=3D0 filter =3D [ '\''a|/de= v/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e00= 00000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|= .*|'\'' ] }  global {  locking_type=3D1  prioritise_write_lo= cks=3D1 wait_for_locks=3D1  use_lvmetad=3D0 }  backup {  = retain_min =3D 50  retain_days =3D 0 } ' --noheadings --units b --n= osuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size= ,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_c= ount,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None)<br= >Thread-17::DEBUG::2014-12-08 10:20:03,631::lvm::288::Storage.Misc.excCm= d::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_n= ames =3D ["^/dev/mapper/"] ignore_suspended_devices=3D1 write_cache_stat= e=3D0 disable_after_error_count=3D3 obtain_device_list_from_udev=3D0 fil= ter =3D [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mappe= r/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e000000000= 0000de|'\'', '\''r|.*|'\'' ] }  global {  locking_type=3D1 &nb= sp;prioritise_write_locks=3D1 wait_for_locks=3D1  use_lvmetad=3D0 }=  backup {  retain_min =3D 50  retain_days =3D 0 } ' --no= headings --units b --nosuffix --separator '|' --ignoreskippedcluster -o<= br>uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda= _size,vg_mda_free,lv_count,pv_count,pv_name f130d166-546e-4905-8b8f-55a1= c1dd2e4f eb912657-8a8c-4173-9d24-92d2b09a773c (cwd None) Thread-14::E= RROR::2014-12-08 10:20:05,785::task::866::Storage.TaskManager.Task::(_se= tError) Task=3D`ffaf5100-e833-4d29-ac5d-f6f7f8ce2b5d`::Unexpected error<= br>    raise SecureError("Secured object is not in safe stat= e") SecureError: Secured object is not in safe state Thread-14::ERROR= ::2014-12-08 10:20:05,797::dispatcher::79::Storage.Dispatcher::(wrapper)= Secured object is not in safe state     raise self.er= ror SecureError: Secured object is not in safe state Thread-34::ERROR= ::2014-12-08 10:21:46,544::task::866::Storage.TaskManager.Task::(_setErr= or) Task=3D`82940da7-10c1-42f6-afca-3c0ac00c1487`::Unexpected error &= nbsp;   raise SecureError("Secured object is not in safe state")<= br>SecureError: Secured object is not in safe state Thread-34::ERROR::20= 14-12-08 10:21:46,549::dispatcher::79::Storage.Dispatcher::(wrapper) Sec= ured object is not in safe state     raise self.error<= br>SecureError: Secured object is not in safe stat <div> </div>2014-1= 2-08 7:30 GMT+01:00 Koen Vanoppen <vanoppen.koen(a)gmail.com>: <div>= </div>> Dear all, > > We have updated our hypervisors wi= th yum. This included an update ov vdsm > also. We now are with these= version: > vdsm-4.16.7-1.gitdb83943.el6.x86_64 > vdsm-python-4= .16.7-1.gitdb83943.el6.noarch > vdsm-python-zombiereaper-4.16.7-1.git= db83943.el6.noarch > vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch &g= t; vdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarch > vdsm-jsonrpc-4.16.= 7-1.gitdb83943.el6.noarch > vdsm-cli-4.16.7-1.gitdb83943.el6.noarch<b= r>> > And ever since these updates we experience BIG troubles with= our fibre > connections. I've already update the brocade cards to th= e latest version. > This seemed to help, they already came back up an= d saw the storage domains > (before the brocade update, they didn't e= ven see their storage domains). > But after a day or so, one of the h= ypersisors began to freak out again. > Coming up and going back down.= .. Below you can find the errors: > > > Thread-821::ERROR= ::2014-12-08 > 07:10:33,190::task::866::Storage.TaskManager.Task::(_s= etError) > Task=3D`27cb9779-a8e9-4080-988d-9772c922710b`::Unexpected = error >     raise se.SpmStatusError() > SpmStatusErro= r: Not SPM: () > Thread-821::ERROR::2014-12-08 > 07:10:33,194::= dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message'= : 'Not SPM: ()', 'code': 654}} > Thread-822::ERROR::2014-12-08 &gt= ; 07:11:03,878::task::866::Storage.TaskManager.Task::(_setError) > Ta= sk=3D`30177931-68c0-420f-950f-da5b770fe35c`::Unexpected error > Threa= d-822::ERROR::2014-12-08 > 07:11:03,882::dispatcher::76::Storage.Disp= atcher::(wrapper) {'status': > {'message': "Unknown pool id, pool not= connected: > ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309= }} > Thread-813::ERROR::2014-12-08 > 07:11:07,634::sdc::137::St= orage.StorageDomainCache::(_findDomain) looking > for unfetched domai= n 78d84adf-7274-4efe-a711-fbec31196ece > Thread-813::ERROR::2014-12-0= 8 > 07:11:07,634::sdc::154::Storage.StorageDomainCache::(_findUnfetch= edDomain) > looking for domain 78d84adf-7274-4efe-a711-fbec31196ece<b= r>> Thread-813::DEBUG::2014-12-08 > 07:11:07,638::lvm::288::Storag= e.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --config ' devi= ces { preferred_names =3D ["^/dev/mapper/"] > ignore_suspended_device= s=3D1 write_cache_state=3D0 disable_after_error_count=3D3 > obtain_de= vice_list_from_udev=3D0 filter =3D [ > '\''a|/dev/mapper/360050768028= 10d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/ma= pper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' ] } &nbs= p;global {  locking_type=3D1  prioritise_write_locks=3D1 > = wait_for_locks=3D1  use_lvmetad=3D0 }  backup {  retain_min = =3D 50  retain_days =3D > 0 } ' --noheadings --units b --nosuffi= x --separator '|' > --ignoreskippedcluster -o > uuid,name,attr,= size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,= lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196ece (cwd= None) > Thread-813::DEBUG::2014-12-08 > 07:11:07,835::lvm::288= ::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n > /sbin/lvm vgs --confi= g ' devices { preferred_names =3D ["^/dev/mapper/"] > ignore_suspende= d_devices=3D1 write_cache_state=3D0 disable_after_error_count=3D3 > o= btain_device_list_from_udev=3D0 filter =3D [ > '\''a|/dev/mapper/3600= 5076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae= |/dev/mapper/36005076802810d48e0000000000000de|'\'', > '\''r|.*|'\'' = ] }  global {  locking_type=3D1  prioritise_write_locks=3D1<= br>> wait_for_locks=3D1  use_lvmetad=3D0 }  backup {  ret= ain_min =3D 50  retain_days =3D > 0 } ' --noheadings --units b -= -nosuffix --separator '|' > --ignoreskippedcluster -o > uuid,na= me,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_m= da_free,lv_count,pv_count,pv_name > 78d84adf-7274-4efe-a711-fbec31196= ece (cwd None) > Thread-813::ERROR::2014-12-08 > 07:11:07,896::= spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersi= on) > Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece do= es not have > expected version 42 it is version 17 > Thread-813= ::ERROR::2014-12-08 > 07:11:07,903::task::866::Storage.TaskManager.Ta= sk::(_setError) > Task=3D`c434f325-5193-4236-a04d-2fee9ac095bc`::Unex= pected error > Thread-813::ERROR::2014-12-08 > 07:11:07,946::di= spatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'message': = "Wrong Master domain or its version: > 'SD=3D78d84adf-7274-4efe-a711-= fbec31196ece, > pool=3D1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code'= : 324}} > Thread-823::ERROR::2014-12-08 > 07:11:43,993::task::8= 66::Storage.TaskManager.Task::(_setError) > Task=3D`9abbccd9-88a7-463= 2-b350-f9af1f65bebd`::Unexpected error > Thread-823::ERROR::2014-12-0= 8 > 07:11:43,998::dispatcher::76::Storage.Dispatcher::(wrapper) {'sta= tus': > {'message': "Unknown pool id, pool not connected: > ('1= d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} > Thread-823::= ERROR::2014-12-08 > 07:11:44,003::task::866::Storage.TaskManager.Task= ::(_setError) > Task=3D`7ef1ac39-e7c2-4538-b30b-ab2fcefac01d`::Unexpe= cted error >     raise se.SpmStatusError() > SpmStatu= sError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:11:44,= 007::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'mes= sage': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08<b= r>> 07:11:44,133::task::866::Storage.TaskManager.Task::(_setError) &g= t; Task=3D`cc1ae82c-f3c4-4efa-9cd2-c62a27801e76`::Unexpected error > = Thread-823::ERROR::2014-12-08 > 07:11:44,137::dispatcher::76::Storage= .Dispatcher::(wrapper) {'status': > {'message': "Unknown pool id, poo= l not connected: > ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code'= : 309}} > Thread-823::ERROR::2014-12-08 > 07:12:24,580::task::8= 66::Storage.TaskManager.Task::(_setError) > Task=3D`9bcbb87d-3093-489= 4-879b-3fe2b09ef351`::Unexpected error > Thread-823::ERROR::2014-12-0= 8 > 07:12:24,585::dispatcher::76::Storage.Dispatcher::(wrapper) {'sta= tus': > {'message': "Unknown pool id, pool not connected: > ('1= d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} > Thread-823::= ERROR::2014-12-08 > 07:13:04,926::task::866::Storage.TaskManager.Task= ::(_setError) > Task=3D`8bdd0c1f-e681-4a8e-ad55-296c021389ed`::Unexpe= cted error >     raise se.SpmStatusError() > SpmStatu= sError: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:13:04,= 931::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'mes= sage': 'Not SPM: ()', 'code': 654}} > Thread-823::ERROR::2014-12-08<b= r>> 07:13:45,342::task::866::Storage.TaskManager.Task::(_setError) &g= t; Task=3D`160ea2a7-b6cb-4102-9df4-71ba87fd863e`::Unexpected error > =     raise se.SpmStatusError() > SpmStatusError: Not SPM: ()= > Thread-823::ERROR::2014-12-08 > 07:13:45,346::dispatcher::76= ::Storage.Dispatcher::(wrapper) {'status': > {'message': 'Not SPM: ()= ', 'code': 654}} > Thread-823::ERROR::2014-12-08 > 07:14:25,879= ::task::866::Storage.TaskManager.Task::(_setError) > Task=3D`985628db= -8f48-44b5-8f61-631a922f7f71`::Unexpected error >     raise= se.SpmStatusError() > SpmStatusError: Not SPM: () > Thread-823= ::ERROR::2014-12-08 > 07:14:25,883::dispatcher::76::Storage.Dispatche= r::(wrapper) {'status': > {'message': 'Not SPM: ()', 'code': 654}}<br= >> Thread-823::ERROR::2014-12-08 > 07:15:06,175::task::866::Storag= e.TaskManager.Task::(_setError) > Task=3D`ddca1c88-0565-41e8-bf0c-22e= adcc75918`::Unexpected error >     raise se.SpmStatusError(= ) > SpmStatusError: Not SPM: () > Thread-823::ERROR::2014-12-08= > 07:15:06,179::dispatcher::76::Storage.Dispatcher::(wrapper) {'stat= us': > {'message': 'Not SPM: ()', 'code': 654}} > Thread-823::E= RROR::2014-12-08 > 07:15:46,585::task::866::Storage.TaskManager.Task:= :(_setError) > Task=3D`12bbded5-59ce-46d8-9e67-f48862a03606`::Unexpec= ted error >     raise se.SpmStatusError() > SpmStatus= Error: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:15:46,5= 89::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'mess= age': 'Not SPM: ()', 'code': 654}} > Thread-814::ERROR::2014-12-08<br= >> 07:16:08,619::sdc::137::Storage.StorageDomainCache::(_findDomain) loo= king > for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece &= gt; Thread-814::ERROR::2014-12-08 > 07:16:08,619::sdc::154::Storage.S= torageDomainCache::(_findUnfetchedDomain) > looking for domain 78d84a= df-7274-4efe-a711-fbec31196ece > Thread-814::DEBUG::2014-12-08 &gt= ; 07:16:08,624::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n &g= t; /sbin/lvm vgs --config ' devices { preferred_names =3D ["^/dev/mapper/"]= > ignore_suspended_devices=3D1 write_cache_state=3D0 disable_after_e= rror_count=3D3 > obtain_device_list_from_udev=3D0 filter =3D [ &gt= ; '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/360050768= 02810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\''= , > '\''r|.*|'\'' ] }  global {  locking_type=3D1  pri= oritise_write_locks=3D1 > wait_for_locks=3D1  use_lvmetad=3D0 } =  backup {  retain_min =3D 50  retain_days =3D > 0 } ' = --noheadings --units b --nosuffix --separator '|' > --ignoreskippedcl= uster -o > uuid,name,attr,size,free,extent_size,extent_count,free_cou= nt,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78d84adf-= 7274-4efe-a711-fbec31196ece (cwd None) > Thread-814::DEBUG::2014-12-0= 8 > 07:16:08,740::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo = -n > /sbin/lvm vgs --config ' devices { preferred_names =3D ["^/dev/m= apper/"] > ignore_suspended_devices=3D1 write_cache_state=3D0 disable= _after_error_count=3D3 > obtain_device_list_from_udev=3D0 filter =3D = [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/3= 6005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e000000000000= 0de|'\'', > '\''r|.*|'\'' ] }  global {  locking_type=3D1 &= nbsp;prioritise_write_locks=3D1 > wait_for_locks=3D1  use_lvmeta= d=3D0 }  backup {  retain_min =3D 50  retain_days =3D &gt= ; 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignores= kippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,= free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 7= 8d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-814::ERROR::2= 014-12-08 > 07:16:08,812::spbackends::271::Storage.StoragePoolDiskBac= kend::(validateMasterDomainVersion) > Requested master domain 78d84ad= f-7274-4efe-a711-fbec31196ece does not have > expected version 42 it = is version 17 > Thread-814::ERROR::2014-12-08 > 07:16:08,820::t= ask::866::Storage.TaskManager.Task::(_setError) > Task=3D`5cdce5cd-6e= 6d-421e-bc2a-f999d8cbb056`::Unexpected error > Thread-814::ERROR::201= 4-12-08 > 07:16:08,865::dispatcher::76::Storage.Dispatcher::(wrapper)= {'status': > {'message': "Wrong Master domain or its version: &gt= ; 'SD=3D78d84adf-7274-4efe-a711-fbec31196ece, > pool=3D1d03dc05-008b-= 4d14-97ce-b17bd714183d'", 'code': 324}} > Thread-815::ERROR::2014-12-= 08 > 07:16:09,471::sdc::137::Storage.StorageDomainCache::(_findDomain= ) looking > for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece= > Thread-815::ERROR::2014-12-08 > 07:16:09,472::sdc::154::Stor= age.StorageDomainCache::(_findUnfetchedDomain) > looking for domain 7= 8d84adf-7274-4efe-a711-fbec31196ece > Thread-815::DEBUG::2014-12-08<b= r>> 07:16:09,476::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n<= br>> /sbin/lvm vgs --config ' devices { preferred_names =3D ["^/dev/mapp= er/"] > ignore_suspended_devices=3D1 write_cache_state=3D0 disable_af= ter_error_count=3D3 > obtain_device_list_from_udev=3D0 filter =3D [<b= r>> '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/3600= 5076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de= |'\'', > '\''r|.*|'\'' ] }  global {  locking_type=3D1 &nbs= p;prioritise_write_locks=3D1 > wait_for_locks=3D1  use_lvmetad= =3D0 }  backup {  retain_min =3D 50  retain_days =3D >= 0 } ' --noheadings --units b --nosuffix --separator '|' > --ignoresk= ippedcluster -o > uuid,name,attr,size,free,extent_size,extent_count,f= ree_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name > 78= d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-815::DEBUG::20= 14-12-08 > 07:16:09,564::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bi= n/sudo -n > /sbin/lvm vgs --config ' devices { preferred_names =3D ["= ^/dev/mapper/"] > ignore_suspended_devices=3D1 write_cache_state=3D0 = disable_after_error_count=3D3 > obtain_device_list_from_udev=3D0 filt= er =3D [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/m= apper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e00000= 00000000de|'\'', > '\''r|.*|'\'' ] }  global {  locking_typ= e=3D1  prioritise_write_locks=3D1 > wait_for_locks=3D1  use= _lvmetad=3D0 }  backup {  retain_min =3D 50  retain_days =3D= > 0 } ' --noheadings --units b --nosuffix --separator '|' > --= ignoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent= _count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name<br= >> 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-815::E= RROR::2014-12-08 > 07:16:09,627::spbackends::271::Storage.StoragePool= DiskBackend::(validateMasterDomainVersion) > Requested master domain = 78d84adf-7274-4efe-a711-fbec31196ece does not have > expected version= 42 it is version 17 > Thread-815::ERROR::2014-12-08 > 07:16:09= ,635::task::866::Storage.TaskManager.Task::(_setError) > Task=3D`abfa= 0fd0-04b3-4c65-b3d0-be18b085a65d`::Unexpected error > Thread-815::ERR= OR::2014-12-08 > 07:16:09,681::dispatcher::76::Storage.Dispatcher::(w= rapper) {'status': > {'message': "Wrong Master domain or its version:= > 'SD=3D78d84adf-7274-4efe-a711-fbec31196ece, > pool=3D1d03dc0= 5-008b-4d14-97ce-b17bd714183d'", 'code': 324}} > Thread-816::ERROR::2= 014-12-08 > 07:16:10,182::sdc::137::Storage.StorageDomainCache::(_fin= dDomain) looking > for unfetched domain 78d84adf-7274-4efe-a711-fbec3= 1196ece > Thread-816::ERROR::2014-12-08 > 07:16:10,183::sdc::15= 4::Storage.StorageDomainCache::(_findUnfetchedDomain) > looking for d= omain 78d84adf-7274-4efe-a711-fbec31196ece > Thread-816::DEBUG::2014-= 12-08 > 07:16:10,187::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/s= udo -n > /sbin/lvm vgs --config ' devices { preferred_names =3D ["^/d= ev/mapper/"] > ignore_suspended_devices=3D1 write_cache_state=3D0 dis= able_after_error_count=3D3 > obtain_device_list_from_udev=3D0 filter = =3D [ > '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapp= er/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e00000000= 00000de|'\'', > '\''r|.*|'\'' ] }  global {  locking_type= =3D1  prioritise_write_locks=3D1 > wait_for_locks=3D1  use_= lvmetad=3D0 }  backup {  retain_min =3D 50  retain_days =3D<= br>> 0 } ' --noheadings --units b --nosuffix --separator '|' > --i= gnoreskippedcluster -o > uuid,name,attr,size,free,extent_size,extent_= count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name = > 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) > Thread-823::ER= ROR::2014-12-08 > 07:16:27,163::task::866::Storage.TaskManager.Task::= (_setError) > Task=3D`9b0fd676-7941-40a7-a71e-0f1dee48a107`::Unexpect= ed error >     raise se.SpmStatusError() > SpmStatusE= rror: Not SPM: () > Thread-823::ERROR::2014-12-08 > 07:16:27,16= 8::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': > {'messa= ge': 'Not SPM: ()', 'code': 654}} > > -------------- next pa= rt -------------- An HTML attachment was scrubbed... URL: <http://= lists.ovirt.org/pipermail/users/attachments/20141208/2f754047/attachment.ht= ml> <div> </div>------------------------------ <div> </div>_= ______________________________________________ Users mailing list Use= rs(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users <div> <= /div> End of Users Digest, Vol 39, Issue 38 *************************= ************ </div><div> </div></div></body></html> ------=_Part_7746146_197691492.1418043545536--

1 0

Error When try add new network using neutron provider
by Eduardo Terzella 08 Dec '14

08 Dec '14

Hello, Error when i try to create a new network using neutron provider: "Error while executing action Add Subnet to Provider: Failed to communicate with the external provider" ==> /var/log/neutron/server.log <== 2014-12-07 22:35:14.825 1061 INFO neutron.wsgi [-] (1061) accepted ('xxx.xxx.xxx.xxx', 42975) 2014-12-07 22:35:14.828 1061 INFO urllib3.connectionpool [-] Starting new HTTP connection (1): 127.0.0.1 2014-12-07 22:35:14.920 1061 INFO neutron.plugins.ml2.db [req-ba2a18ec-6e02-4526-99a8-27b35152781f None] Added segment e0ad11df-9c5a-4167-82ea-313dcc626661 of type flat for network 213c62ce-e167-4bb0-bd2d-720dd06bc970 2014-12-07 22:35:14.930 1061 INFO neutron.wsgi [req-ba2a18ec-6e02-4526-99a8-27b35152781f None] - - [07/Dec/2014 22:35:14] "POST /v2.0/networ ks HTTP/1.1" 201 527 0.103579

2 1

ssd cache
by yao xu 08 Dec '14

08 Dec '14

Hi ! Everyone! Is anyone tried to add an ssd cache to node using bcache or flashcache? It seemed that we have to change the procedure when adding a storage domain . Maybe it can be done in serveral days , but sync the cache between nodes seemed a little tricky. Do you have any idea? Thanks

2 1

Storage Domain Issue
by Koen Vanoppen 08 Dec '14

08 Dec '14

Dear all, We have updated our hypervisors with yum. This included an update ov vdsm also. We now are with these version: vdsm-4.16.7-1.gitdb83943.el6.x86_64 vdsm-python-4.16.7-1.gitdb83943.el6.noarch vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el6.noarch vdsm-xmlrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-yajsonrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-jsonrpc-4.16.7-1.gitdb83943.el6.noarch vdsm-cli-4.16.7-1.gitdb83943.el6.noarch And ever since these updates we experience BIG troubles with our fibre connections. I've already update the brocade cards to the latest version. This seemed to help, they already came back up and saw the storage domains (before the brocade update, they didn't even see their storage domains). But after a day or so, one of the hypersisors began to freak out again. Coming up and going back down... Below you can find the errors: Thread-821::ERROR::2014-12-08 07:10:33,190::task::866::Storage.TaskManager.Task::(_setError) Task=`27cb9779-a8e9-4080-988d-9772c922710b`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-821::ERROR::2014-12-08 07:10:33,194::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-822::ERROR::2014-12-08 07:11:03,878::task::866::Storage.TaskManager.Task::(_setError) Task=`30177931-68c0-420f-950f-da5b770fe35c`::Unexpected error Thread-822::ERROR::2014-12-08 07:11:03,882::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Unknown pool id, pool not connected: ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} Thread-813::ERROR::2014-12-08 07:11:07,634::sdc::137::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-813::ERROR::2014-12-08 07:11:07,634::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-813::DEBUG::2014-12-08 07:11:07,638::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-813::DEBUG::2014-12-08 07:11:07,835::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-813::ERROR::2014-12-08 07:11:07,896::spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersion) Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece does not have expected version 42 it is version 17 Thread-813::ERROR::2014-12-08 07:11:07,903::task::866::Storage.TaskManager.Task::(_setError) Task=`c434f325-5193-4236-a04d-2fee9ac095bc`::Unexpected error Thread-813::ERROR::2014-12-08 07:11:07,946::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Wrong Master domain or its version: 'SD=78d84adf-7274-4efe-a711-fbec31196ece, pool=1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code': 324}} Thread-823::ERROR::2014-12-08 07:11:43,993::task::866::Storage.TaskManager.Task::(_setError) Task=`9abbccd9-88a7-4632-b350-f9af1f65bebd`::Unexpected error Thread-823::ERROR::2014-12-08 07:11:43,998::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Unknown pool id, pool not connected: ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} Thread-823::ERROR::2014-12-08 07:11:44,003::task::866::Storage.TaskManager.Task::(_setError) Task=`7ef1ac39-e7c2-4538-b30b-ab2fcefac01d`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:11:44,007::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-823::ERROR::2014-12-08 07:11:44,133::task::866::Storage.TaskManager.Task::(_setError) Task=`cc1ae82c-f3c4-4efa-9cd2-c62a27801e76`::Unexpected error Thread-823::ERROR::2014-12-08 07:11:44,137::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Unknown pool id, pool not connected: ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} Thread-823::ERROR::2014-12-08 07:12:24,580::task::866::Storage.TaskManager.Task::(_setError) Task=`9bcbb87d-3093-4894-879b-3fe2b09ef351`::Unexpected error Thread-823::ERROR::2014-12-08 07:12:24,585::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Unknown pool id, pool not connected: ('1d03dc05-008b-4d14-97ce-b17bd714183d',)", 'code': 309}} Thread-823::ERROR::2014-12-08 07:13:04,926::task::866::Storage.TaskManager.Task::(_setError) Task=`8bdd0c1f-e681-4a8e-ad55-296c021389ed`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:13:04,931::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-823::ERROR::2014-12-08 07:13:45,342::task::866::Storage.TaskManager.Task::(_setError) Task=`160ea2a7-b6cb-4102-9df4-71ba87fd863e`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:13:45,346::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-823::ERROR::2014-12-08 07:14:25,879::task::866::Storage.TaskManager.Task::(_setError) Task=`985628db-8f48-44b5-8f61-631a922f7f71`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:14:25,883::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-823::ERROR::2014-12-08 07:15:06,175::task::866::Storage.TaskManager.Task::(_setError) Task=`ddca1c88-0565-41e8-bf0c-22eadcc75918`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:15:06,179::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-823::ERROR::2014-12-08 07:15:46,585::task::866::Storage.TaskManager.Task::(_setError) Task=`12bbded5-59ce-46d8-9e67-f48862a03606`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:15:46,589::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}} Thread-814::ERROR::2014-12-08 07:16:08,619::sdc::137::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-814::ERROR::2014-12-08 07:16:08,619::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-814::DEBUG::2014-12-08 07:16:08,624::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-814::DEBUG::2014-12-08 07:16:08,740::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-814::ERROR::2014-12-08 07:16:08,812::spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersion) Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece does not have expected version 42 it is version 17 Thread-814::ERROR::2014-12-08 07:16:08,820::task::866::Storage.TaskManager.Task::(_setError) Task=`5cdce5cd-6e6d-421e-bc2a-f999d8cbb056`::Unexpected error Thread-814::ERROR::2014-12-08 07:16:08,865::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Wrong Master domain or its version: 'SD=78d84adf-7274-4efe-a711-fbec31196ece, pool=1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code': 324}} Thread-815::ERROR::2014-12-08 07:16:09,471::sdc::137::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-815::ERROR::2014-12-08 07:16:09,472::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-815::DEBUG::2014-12-08 07:16:09,476::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-815::DEBUG::2014-12-08 07:16:09,564::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-815::ERROR::2014-12-08 07:16:09,627::spbackends::271::Storage.StoragePoolDiskBackend::(validateMasterDomainVersion) Requested master domain 78d84adf-7274-4efe-a711-fbec31196ece does not have expected version 42 it is version 17 Thread-815::ERROR::2014-12-08 07:16:09,635::task::866::Storage.TaskManager.Task::(_setError) Task=`abfa0fd0-04b3-4c65-b3d0-be18b085a65d`::Unexpected error Thread-815::ERROR::2014-12-08 07:16:09,681::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': "Wrong Master domain or its version: 'SD=78d84adf-7274-4efe-a711-fbec31196ece, pool=1d03dc05-008b-4d14-97ce-b17bd714183d'", 'code': 324}} Thread-816::ERROR::2014-12-08 07:16:10,182::sdc::137::Storage.StorageDomainCache::(_findDomain) looking for unfetched domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-816::ERROR::2014-12-08 07:16:10,183::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain) looking for domain 78d84adf-7274-4efe-a711-fbec31196ece Thread-816::DEBUG::2014-12-08 07:16:10,187::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''a|/dev/mapper/36005076802810d489000000000000062|/dev/mapper/36005076802810d48e0000000000000ae|/dev/mapper/36005076802810d48e0000000000000de|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 78d84adf-7274-4efe-a711-fbec31196ece (cwd None) Thread-823::ERROR::2014-12-08 07:16:27,163::task::866::Storage.TaskManager.Task::(_setError) Task=`9b0fd676-7941-40a7-a71e-0f1dee48a107`::Unexpected error raise se.SpmStatusError() SpmStatusError: Not SPM: () Thread-823::ERROR::2014-12-08 07:16:27,168::dispatcher::76::Storage.Dispatcher::(wrapper) {'status': {'message': 'Not SPM: ()', 'code': 654}}

1 1

is it possible to run ovirt node on Diskless HW?
by Arman Khalatyan 08 Dec '14

08 Dec '14

Hello, Doing steps in: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/ht… I would like to know is some one succeeded to run the host on a diskless machine? i am using Centos6.6 node with ovirt 3.5. Thanks, Arman. *********************************************************** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany ***********************************************************

2 3

Add new host with Neutron Provider
by Eduardo Terzella 08 Dec '14

08 Dec '14

Hello, You can help ? I tried to add neutron provider on my node ovirt and when tried to installing occurred the following error: 2014-12-07 15:15:31 INFO otopi.plugins.otopi.packagers.yumpackager yumpackager.info:92 Yum install: 52/53: openstack-neutron-openvswitch-2014.1.3-4.el6.noarch 2014-12-07 15:15:31 ERROR otopi.plugins.otopi.packagers.yumpackager yumpackager.error:97 Yum Non-fatal POSTIN scriptlet failure in rpm package openstack-neutron-openvswitch-2014.1.3-4.el6.noarch 2014-12-07 15:15:31 DEBUG otopi.plugins.otopi.packagers.yumpackager yumpackager.verbose:88 Yum Script sink: error reading information on service openstack-openvswitch-agent: No such file or directory warning: %post(openstack-neutron-openvswitch-2014.1.3-4.el6.noarch) scriptlet failed, exit status 1 2014-12-07 15:15:31 DEBUG otopi.plugins.otopi.packagers.yumpackager yumpackager.verbose:88 Yum Done: openstack-neutron-openvswitch-2014.1.3-4.el6.noarch 2014-12-07 15:15:31 DEBUG otopi.plugins.otopi.packagers.yumpackager yumpackager.verbose:88 Yum Done: openstack-neutron-openvswitch-2014.1.3-4.el6.noarch I already add the repo openstak on the node.

2 5

oVirt power management issue
by Wout Peeters 08 Dec '14

08 Dec '14

------=_Part_215_24910333.1417776619019 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, We're trying to set up an oVirt configuration with an oVirt-controller (CentOS 6), iSCSI-storage (Dell MD3200i) and 3 vm-hosts (CentOS 7) powered by 2 APC PDUs. Testing the Power Management settings in the web GUI, we get the following message: "Test Succeeded, unknown." The oVirt engine log outputs the following: 2014-12-05 11:23:00,872 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host vm-02 from data center XXXX was chosen as a proxy to execute Status command on Host vm-03. 2014-12-05 11:23:00,879 INFO [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Using Host vm-02 from data center XXXX as proxy to execute Status command on Host 2014-12-05 11:23:00,904 INFO [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command, Proxy Host:vm-02, Agent:apc, Target Host:, Management IP:***.***.***.***, User:apc, Options:, Fencing policy:null 2014-12-05 11:23:00,930 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-02, HostId = 071554fc-eed2-4e8f-b6bc-041248d0eaa5, targetVdsId = 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip = ***.***.***.***, port = , type = apc, user = apc, password = ******, options = '', policy = 'null'), log id: 2803522 2014-12-05 11:23:01,137 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Power Management test failed for Host vm-03.Done 2014-12-05 11:23:01,138 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test Succeeded, unknown, log id: 2803522 2014-12-05 11:23:01,139 WARN [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Fencing operation failed with proxy host 071554fc-eed2-4e8f-b6bc-041248d0eaa5, trying another proxy... 2014-12-05 11:23:01,241 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host vm-01 from data center XXXX was chosen as a proxy to execute Status command on Host vm-03. 2014-12-05 11:23:01,244 INFO [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Using Host vm-01 from data center XXXX as proxy to execute Status command on Host 2014-12-05 11:23:01,246 INFO [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command, Proxy Host:vm-01, Agent:apc, Target Host:, Management IP:***.***.***.***, User:apc, Options:, Fencing policy:null 2014-12-05 11:23:01,273 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-01, HostId = c50eb9bf-5294-4d46-813d-7adfcb41d71d, targetVdsId = 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip = ***.***.***.***, port = , type = apc, user = apc, password = ******, options = '', policy = 'null'), log id: 2b00de15 2014-12-05 11:23:01,449 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Power Management test failed for Host vm-03.Done 2014-12-05 11:23:01,451 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test Succeeded, unknown, log id: 2b00de15 This is the vdsm.log output: JsonRpc (StompReactor)::DEBUG::2014-12-05 11:34:05,065::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message <StompFrame command='SEND'> JsonRpcServer::DEBUG::2014-12-05 11:34:05,067::__init__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request Thread-24996::DEBUG::2014-12-05 11:34:05,069::API::1188::vds::(fenceNode) fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None) Thread-24996::DEBUG::2014-12-05 11:34:05,069::utils::738::root::(execCmd) /usr/sbin/fence_apc (cwd None) Thread-24996::DEBUG::2014-12-05 11:34:05,131::utils::758::root::(execCmd) FAILED: <err> = "Failed: You have to enter plug number or machine identification\nPlease use '-h' for usage\n"; <rc> = 1 Thread-24996::DEBUG::2014-12-05 11:34:05,131::API::1143::vds::(fence) rc 1 inp agent=fence_apc ipaddr=***.***.***.*** login=apc action=status passwd=XXXX out [] err ['Failed: You have to enter plug number or machine identification', "Please use '-h' for usage"] The 'port' and 'options' fields show up as empty, even if we enter '22' or 'port=22'. We did enter the slot number as well. Entering the fence_apc command manually, we get: fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x Status: ON Anyone have an idea what could be the problem? Thanks for your time and kind regards, Wout ------=_Part_215_24910333.1417776619019 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><head><style type=3D'text/css'>p { margin: 0; }</style></head><body><= div style=3D'font-family: arial,helvetica,sans-serif; font-size: 10pt; colo= r: #000000'>Hi, We're trying to set up an oVirt configuration with a= n oVirt-controller (CentOS 6), iSCSI-storage (Dell MD3200i) and 3 vm-hosts = (CentOS 7) powered by 2 APC PDUs. Testing the Power Management settings in = the web GUI, we get the following message: "Test Succeeded, unknown." The o= Virt engine log outputs the following: 2014-12-05 11:23:00,872 INFO&= nbsp; [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector= ] (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom Ev= ent ID: -1, Message: Host vm-02 from data center XXXX was chosen as a proxy= to execute Status command on Host vm-03. 2014-12-05 11:23:00,879 INFO&n= bsp; [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Usin= g Host vm-02 from data center XXXX as proxy to execute Status command on Ho= st 2014-12-05 11:23:00,904 INFO  [org.ovirt.engine.core.bll.FenceEx= ecutor] (ajp--127.0.0.1-8702-7) Executing <Status> Power Management c= ommand, Proxy Host:vm-02, Agent:apc, Target Host:, Management IP:***.***.**= *.***, User:apc, Options:, Fencing policy:null 2014-12-05 11:23:00,930 I= NFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (a= jp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName =3D vm-02, HostId = =3D 071554fc-eed2-4e8f-b6bc-041248d0eaa5, targetVdsId =3D 67c642ed-0a7a-4e3= b-8dd6-32a36df4aea9, action =3D Status, ip =3D ***.***.***.***, port =3D , = type =3D apc, user =3D apc, password =3D ******, options =3D '', policy =3D= 'null'), log id: 2803522 2014-12-05 11:23:01,137 WARN  [org.ovirt.= engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1= -8702-7) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Messa= ge: Power Management test failed for Host vm-03.Done 2014-12-05 11:23:01= ,138 INFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSComma= nd] (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test Succee= ded, unknown, log id: 2803522 2014-12-05 11:23:01,139 WARN  [org.ov= irt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7) Fencing operatio= n failed with proxy host 071554fc-eed2-4e8f-b6bc-041248d0eaa5, trying anoth= er proxy... 2014-12-05 11:23:01,241 INFO  [org.ovirt.engine.core.da= l.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-7) Corre= lation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host vm-01= from data center XXXX was chosen as a proxy to execute Status command on H= ost vm-03. 2014-12-05 11:23:01,244 INFO  [org.ovirt.engine.core.bll= .FenceExecutor] (ajp--127.0.0.1-8702-7) Using Host vm-01 from data center X= XXX as proxy to execute Status command on Host 2014-12-05 11:23:01,246 I= NFO  [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-7)= Executing <Status> Power Management command, Proxy Host:vm-01, Agent= :apc, Target Host:, Management IP:***.***.***.***, User:apc, Options:, Fenc= ing policy:null 2014-12-05 11:23:01,273 INFO  [org.ovirt.engine.cor= e.vdsbroker.vdsbroker.FenceVdsVDSCommand] (ajp--127.0.0.1-8702-7) START, Fe= nceVdsVDSCommand(HostName =3D vm-01, HostId =3D c50eb9bf-5294-4d46-813d-7ad= fcb41d71d, targetVdsId =3D 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action =3D= Status, ip =3D ***.***.***.***, port =3D , type =3D apc, user =3D apc, pas= sword =3D ******, options =3D '', policy =3D 'null'), log id: 2b00de15 2= 014-12-05 11:23:01,449 WARN  [org.ovirt.engine.core.dal.dbbroker.audit= loghandling.AuditLogDirector] (ajp--127.0.0.1-8702-7) Correlation ID: null,= Call Stack: null, Custom Event ID: -1, Message: Power Management test fail= ed for Host vm-03.Done 2014-12-05 11:23:01,451 INFO  [org.ovirt.eng= ine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (ajp--127.0.0.1-8702-7) FI= NISH, FenceVdsVDSCommand, return: Test Succeeded, unknown, log id: 2b00de15= This is the vdsm.log output: JsonRpc (StompReactor)::DEBUG::= 2014-12-05 11:34:05,065::stompReactor::98::Broker.StompAdapter::(handle_fra= me) Handling message <StompFrame command=3D'SEND'> JsonRpcServer::= DEBUG::2014-12-05 11:34:05,067::__init__::504::jsonrpc.JsonRpcServer::(serv= e_requests) Waiting for request Thread-24996::DEBUG::2014-12-05 11:34:05= ,069::API::1188::vds::(fenceNode) fenceNode(addr=3D***.***.***.***,port=3D,= agent=3Dapc,user=3Dapc,passwd=3DXXXX,action=3Dstatus,secure=3DFalse,options= =3D,policy=3DNone) Thread-24996::DEBUG::2014-12-05 11:34:05,069::utils::= 738::root::(execCmd) /usr/sbin/fence_apc (cwd None) Thread-24996::DEBUG:= :2014-12-05 11:34:05,131::utils::758::root::(execCmd) FAILED: <err> = =3D "Failed: You have to enter plug number or machine identification\nPleas= e use '-h' for usage\n"; <rc> =3D 1 Thread-24996::DEBUG::2014-12-0= 5 11:34:05,131::API::1143::vds::(fence) rc 1 inp agent=3Dfence_apc ipadd= r=3D***.***.***.*** login=3Dapc action=3Dstatus passwd=3DXXXX &= nbsp;out [] err ['Failed: You have to enter plug number or machine identifi= cation', "Please use '-h' for usage"] The 'port' and 'options' field= s show up as empty, even if we enter '22' or 'port=3D22'. We did enter the = slot number as well. Entering the fence_apc command manually, we get= : fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x<br= >Status: ON Anyone have an idea what could be the problem? <b= r>Thanks for your time and kind regards, Wout </div></body></html= > ------=_Part_215_24910333.1417776619019--

2 2

Re: [ovirt-users] ksmd high cpu usage from almost a week with just one vm running
by Markus Stockhausen 07 Dec '14

07 Dec '14

------=_NextPartTM-000-dd1609c7-6593-4600-9926-1b296d875462 Content-Type: multipart/alternative; boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C9D38EXCHANGEcollogi_" --_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C9D38EXCHANGEcollogi_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 TWVtb3J5IHVzYWdlID4gODAlOiBrc20ga2lja3MgaW4uIFRoZXJlIGl0IHdpbGwgcnVuIGF0IGZ1 bGwgc3BlZWQgdW50aWwgdXNhZ2UgaXMgYmVsb3cgODAlLiBUaGVyZSBpcyBhbiBvcGVuIEJaIGZy b20gbWUuIEJhZCBiZWhhdmlvdXIgaXMgY29udHJvbGxlZCBieSBtb20uDQoNCk1hcmt1cw0KDQpB bSAwNi4xMi4yMDE0IDE1OjU4IHNjaHJpZWIgbWFkIEVuZ2luZWVyIDx0aGVtYWRlbmdpbjMzckBn bWFpbC5jb20+Og0KSGVsbG8gQWxsLA0KICAgICAgICAgICAgIEkgYW0gdXNpbmcgY2VudG9zNi41 IHg2NCBvbiBhIHNlcnZlciB3aXRoIDQ4IEcgUkFNIGFuZCA4DQpDb3Jlcy5NYW5hZ2VkIGJ5IE92 aXJ0DQpUaGVyZSBpcyBvbmx5IG9uZSBydW5uaW5nIFZNIHdpdGggUkFNIDM0IEcgYW5kIHdpdGgg NiBWQ1BVIChwaW5uZWQgdG8NCnByb3BlciBudW1hIG5vZGVzKQ0KDQpmcm9tIHRvcA0KDQp0b3Ag LSAwNjo0Mjo0OCB1cCA2NyBkYXlzLCAyMDowNSwgIDEgdXNlciwgIGxvYWQgYXZlcmFnZTogMC4y NiwgMC4yMCwgMC4xNw0KVGFza3M6IDI4NSB0b3RhbCwgICAyIHJ1bm5pbmcsIDI4MiBzbGVlcGlu ZywgICAwIHN0b3BwZWQsICAgMSB6b21iaWUNCkNwdShzKTogIDEuMCV1cywgIDEuNCVzeSwgIDAu MCVuaSwgOTcuNSVpZCwgIDAuMSV3YSwgIDAuMCVoaSwgIDAuMCVzaSwgIDAuMCVzdA0KTWVtOiAg NDkzNTY0NjhrIHRvdGFsLCAzMzk3NzY4NGsgdXNlZCwgMTUzNzg3ODRrIGZyZWUsICAgMTQyODEy ayBidWZmZXJzDQpTd2FwOiAxMjMzNzE0NGsgdG90YWwsICAgICAgICAwayB1c2VkLCAxMjMzNzE0 NGsgZnJlZSwgICAzNDMwNTJrIGNhY2hlZA0KDQogIFBJRCBVU0VSICAgICAgUFIgIE5JICBWSVJU ICBSRVMgIFNIUiBTICVDUFUgJU1FTSAgICBUSU1FKyAgQ09NTUFORA0KICAxMDEgcm9vdCAgICAg IDI1ICAgNSAgICAgMCAgICAwICAgIDAgUiAyNy40ICAwLjAgICA1NjUwOjA0IFtrc21kXQ0KMjYw MDQgdmRzbSAgICAgICAwIC0yMCAzMzcxbSAgNjRtIDk0MDAgUyAgOS44ICAwLjEgICAxNjUzOjI3 DQovdXNyL2Jpbi9weXRob24gL3Vzci9zaGFyZS92ZHNtL3Zkc20gLS1waWRmaWxlIC92YXIvcnVu L3Zkc20vdmRzbWQucGlkDQoyMDk2MyBxZW11ICAgICAgMjAgICAwIDM4LjVnICAzM2cgNjc5MiBT ICAzLjkgNzEuNiAgIDUyMjU6NDMNCi91c3IvbGliZXhlYy9xZW11LWt2bSAtbmFtZSBDaW5kZXIg LVMgLU0gcmhlbDYuNS4wIC1jcHUgTmVoYWxlbQ0KLWVuYWJsZS1rdm0gLW0gMzQwOTYgLXJlYWx0 aW1lIG1sb2NrPW9mZiAtc21wDQo2LG1heGNwdXM9MTYwLHNvY2tldHM9ODAsYw0KDQpmcm9tIC9z eXMva2VybmVsL21tL2tzbQ0KcGFnZXNfdW5zaGFyZWQgIDc2MDIzMjINCnBhZ2VzX3NoYXJlZCAg ICAgMjA3MDIzDQpwYWdlc190b19zY2FuICAgNjQNCnBhZ2VzX3ZvbGF0aWxlICAgIDMxNjc4DQoN CkFueSBpZGVhIHdoeSBrc21kIGlzIG5vdCBjb21pbmcgdG8gbm9ybWFsIENQVSB1c2FnZSAsb24g YSBkaWZmZXJlbnQNCnNlcnZlciBrc21kIHdhcyBkaXNhYmxlZCBhbmQgZm9yIHRlc3Rpbmcgd2hl biBpIGVuYWJsZWQgaXQgaW5pdGlhbGx5DQpDUFUgdXNhZ2Ugd2FzIGhpZ2ggYnV0IGxhdGVyIHNl dHRsZWQgZG93biB0byAzJSAsaW4gdGhhdCBob3N0IGkgaGF2ZSA0DQpWTXMgcnVubmluZy4NCg0K QmVmb3JlIHR1cm5pbmcgb2ZmIGtzbWQgY2FuIGFueSBvbmUgaGVscCBtZSBmaW5kIG91dCB3aHkg a3NtZCBpcw0KYmVoYXZpbmcgbGlrZSB0aGlzLkluaXRpYWxseSBpdCBoYWQgMiB2aXJ0dWFsIG1h Y2hpbmVzLGJlY2F1c2Ugb2YgaGlnaA0KQ1BVIHV0aWxpemF0aW9uIG9mIHRoaXMgZ3Vlc3Qgb3Ro ZXIgaXMgbWlncmF0ZWQgdG8gYW5vdGhlciBob3N0Lg0KDQpUaGFua3MNCl9fX19fX19fX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fDQpVc2VycyBtYWlsaW5nIGxpc3QNClVz ZXJzQG92aXJ0Lm9yZw0KaHR0cDovL2xpc3RzLm92aXJ0Lm9yZy9tYWlsbWFuL2xpc3RpbmZvL3Vz ZXJzDQo= --_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C9D38EXCHANGEcollogi_ Content-Type: text/html; charset="utf-8" Content-ID: <D4B5292395AD824885E0B8CCFCD13B95(a)collogia.de> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5Pg0KPHAgZGlyPSJsdHIi Pk1lbW9yeSB1c2FnZSAmZ3Q7IDgwJToga3NtIGtpY2tzIGluLiBUaGVyZSBpdCB3aWxsIHJ1biBh dCBmdWxsIHNwZWVkIHVudGlsIHVzYWdlIGlzIGJlbG93IDgwJS4gVGhlcmUgaXMgYW4gb3BlbiBC WiBmcm9tIG1lLiBCYWQgYmVoYXZpb3VyIGlzIGNvbnRyb2xsZWQgYnkgbW9tLjwvcD4NCjxwIGRp cj0ibHRyIj5NYXJrdXM8L3A+DQo8ZGl2IGNsYXNzPSJnbWFpbF9xdW90ZSI+QW0gMDYuMTIuMjAx NCAxNTo1OCBzY2hyaWViIG1hZCBFbmdpbmVlciAmbHQ7dGhlbWFkZW5naW4zM3JAZ21haWwuY29t Jmd0Ozo8YnIgdHlwZT0iYXR0cmlidXRpb24iPg0KPGJsb2NrcXVvdGUgY2xhc3M9InF1b3RlIiBz dHlsZT0ibWFyZ2luOjAgMCAwIC44ZXg7Ym9yZGVyLWxlZnQ6MXB4ICNjY2Mgc29saWQ7cGFkZGlu Zy1sZWZ0OjFleCI+DQo8ZGl2Pjxmb250IHNpemU9IjIiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6 MTBwdCI+PC9zcGFuPjwvZm9udD4NCjxkaXY+SGVsbG8gQWxsLDxicj4NCiZuYnNwOyZuYnNwOyZu YnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNw OyBJIGFtIHVzaW5nIGNlbnRvczYuNSB4NjQgb24gYSBzZXJ2ZXIgd2l0aCA0OCBHIFJBTSBhbmQg ODxicj4NCkNvcmVzLk1hbmFnZWQgYnkgT3ZpcnQ8YnI+DQpUaGVyZSBpcyBvbmx5IG9uZSBydW5u aW5nIFZNIHdpdGggUkFNIDM0IEcgYW5kIHdpdGggNiBWQ1BVIChwaW5uZWQgdG88YnI+DQpwcm9w ZXIgbnVtYSBub2Rlcyk8YnI+DQo8YnI+DQpmcm9tIHRvcDxicj4NCjxicj4NCnRvcCAtIDA2OjQy OjQ4IHVwIDY3IGRheXMsIDIwOjA1LCZuYnNwOyAxIHVzZXIsJm5ic3A7IGxvYWQgYXZlcmFnZTog MC4yNiwgMC4yMCwgMC4xNzxicj4NClRhc2tzOiAyODUgdG90YWwsJm5ic3A7Jm5ic3A7IDIgcnVu bmluZywgMjgyIHNsZWVwaW5nLCZuYnNwOyZuYnNwOyAwIHN0b3BwZWQsJm5ic3A7Jm5ic3A7IDEg em9tYmllPGJyPg0KQ3B1KHMpOiZuYnNwOyAxLjAldXMsJm5ic3A7IDEuNCVzeSwmbmJzcDsgMC4w JW5pLCA5Ny41JWlkLCZuYnNwOyAwLjEld2EsJm5ic3A7IDAuMCVoaSwmbmJzcDsgMC4wJXNpLCZu YnNwOyAwLjAlc3Q8YnI+DQpNZW06Jm5ic3A7IDQ5MzU2NDY4ayB0b3RhbCwgMzM5Nzc2ODRrIHVz ZWQsIDE1Mzc4Nzg0ayBmcmVlLCZuYnNwOyZuYnNwOyAxNDI4MTJrIGJ1ZmZlcnM8YnI+DQpTd2Fw OiAxMjMzNzE0NGsgdG90YWwsJm5ic3A7Jm5ic3A7Jm5ic3A7Jm5ic3A7Jm5ic3A7Jm5ic3A7Jm5i c3A7IDBrIHVzZWQsIDEyMzM3MTQ0ayBmcmVlLCZuYnNwOyZuYnNwOyAzNDMwNTJrIGNhY2hlZDxi cj4NCjxicj4NCiZuYnNwOyBQSUQgVVNFUiZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyBQ UiZuYnNwOyBOSSZuYnNwOyBWSVJUJm5ic3A7IFJFUyZuYnNwOyBTSFIgUyAlQ1BVICVNRU0mbmJz cDsmbmJzcDsmbmJzcDsgVElNRSYjNDM7Jm5ic3A7IENPTU1BTkQ8YnI+DQombmJzcDsgMTAxIHJv b3QmbmJzcDsmbmJzcDsmbmJzcDsmbmJzcDsmbmJzcDsgMjUmbmJzcDsmbmJzcDsgNSZuYnNwOyZu YnNwOyZuYnNwOyZuYnNwOyAwJm5ic3A7Jm5ic3A7Jm5ic3A7IDAmbmJzcDsmbmJzcDsmbmJzcDsg MCBSIDI3LjQmbmJzcDsgMC4wJm5ic3A7Jm5ic3A7IDU2NTA6MDQgW2tzbWRdPGJyPg0KMjYwMDQg dmRzbSZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyZuYnNwOyAwIC0yMCAzMzcxbSZuYnNw OyA2NG0gOTQwMCBTJm5ic3A7IDkuOCZuYnNwOyAwLjEmbmJzcDsmbmJzcDsgMTY1MzoyNzxicj4N Ci91c3IvYmluL3B5dGhvbiAvdXNyL3NoYXJlL3Zkc20vdmRzbSAtLXBpZGZpbGUgL3Zhci9ydW4v dmRzbS92ZHNtZC5waWQ8YnI+DQoyMDk2MyBxZW11Jm5ic3A7Jm5ic3A7Jm5ic3A7Jm5ic3A7Jm5i c3A7IDIwJm5ic3A7Jm5ic3A7IDAgMzguNWcmbmJzcDsgMzNnIDY3OTIgUyZuYnNwOyAzLjkgNzEu NiZuYnNwOyZuYnNwOyA1MjI1OjQzPGJyPg0KL3Vzci9saWJleGVjL3FlbXUta3ZtIC1uYW1lIENp bmRlciAtUyAtTSByaGVsNi41LjAgLWNwdSBOZWhhbGVtPGJyPg0KLWVuYWJsZS1rdm0gLW0gMzQw OTYgLXJlYWx0aW1lIG1sb2NrPW9mZiAtc21wPGJyPg0KNixtYXhjcHVzPTE2MCxzb2NrZXRzPTgw LGM8YnI+DQo8YnI+DQpmcm9tIC9zeXMva2VybmVsL21tL2tzbTxicj4NCnBhZ2VzX3Vuc2hhcmVk Jm5ic3A7IDc2MDIzMjI8YnI+DQpwYWdlc19zaGFyZWQmbmJzcDsmbmJzcDsmbmJzcDsmbmJzcDsg MjA3MDIzPGJyPg0KcGFnZXNfdG9fc2NhbiZuYnNwOyZuYnNwOyA2NDxicj4NCnBhZ2VzX3ZvbGF0 aWxlJm5ic3A7Jm5ic3A7Jm5ic3A7IDMxNjc4PGJyPg0KPGJyPg0KQW55IGlkZWEgd2h5IGtzbWQg aXMgbm90IGNvbWluZyB0byBub3JtYWwgQ1BVIHVzYWdlICxvbiBhIGRpZmZlcmVudDxicj4NCnNl cnZlciBrc21kIHdhcyBkaXNhYmxlZCBhbmQgZm9yIHRlc3Rpbmcgd2hlbiBpIGVuYWJsZWQgaXQg aW5pdGlhbGx5PGJyPg0KQ1BVIHVzYWdlIHdhcyBoaWdoIGJ1dCBsYXRlciBzZXR0bGVkIGRvd24g dG8gMyUgLGluIHRoYXQgaG9zdCBpIGhhdmUgNDxicj4NClZNcyBydW5uaW5nLjxicj4NCjxicj4N CkJlZm9yZSB0dXJuaW5nIG9mZiBrc21kIGNhbiBhbnkgb25lIGhlbHAgbWUgZmluZCBvdXQgd2h5 IGtzbWQgaXM8YnI+DQpiZWhhdmluZyBsaWtlIHRoaXMuSW5pdGlhbGx5IGl0IGhhZCAyIHZpcnR1 YWwgbWFjaGluZXMsYmVjYXVzZSBvZiBoaWdoPGJyPg0KQ1BVIHV0aWxpemF0aW9uIG9mIHRoaXMg Z3Vlc3Qgb3RoZXIgaXMgbWlncmF0ZWQgdG8gYW5vdGhlciBob3N0Ljxicj4NCjxicj4NClRoYW5r czxicj4NCl9fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fPGJy Pg0KVXNlcnMgbWFpbGluZyBsaXN0PGJyPg0KVXNlcnNAb3ZpcnQub3JnPGJyPg0KPGEgaHJlZj0i aHR0cDovL2xpc3RzLm92aXJ0Lm9yZy9tYWlsbWFuL2xpc3RpbmZvL3VzZXJzIj5odHRwOi8vbGlz dHMub3ZpcnQub3JnL21haWxtYW4vbGlzdGluZm8vdXNlcnM8L2E+PGJyPg0KPC9kaXY+DQo8L2Rp dj4NCjwvYmxvY2txdW90ZT4NCjwvZGl2Pg0KPC9ib2R5Pg0KPC9odG1sPg0K --_000_12EF8D94C6F8734FB2FF37B9FBEDD1735F8C9D38EXCHANGEcollogi_-- ------=_NextPartTM-000-dd1609c7-6593-4600-9926-1b296d875462 Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-dd1609c7-6593-4600-9926-1b296d875462--

3 4

run ovirt-shell script like background job - problem
by Grzegorz Szypa 07 Dec '14

07 Dec '14

Hi, I have a problem with running ovirt-shell script, that it starting VMs. In dialog mode it's fine, but in background no :( Example script: ovirt-shell -E 'action vm WinSrv2012r2 start' I start this job in cron as root. Have somebody idea?? -- G.Sz.

2 1

Newly deployed ovirt instance can not start a VM
by Jeremy Utley 07 Dec '14

07 Dec '14

Hello everyone! I just finished setting up our new demo Ovirt implementation, but am having some issues once I get to the point of starting up a VM. Every time we try to start a VM, we get the error: The host {hostname} did not satisfy internal filter Network because network(s) are missing. This is trying to launch vm with the Cirros image from the OVirt glance repository. This is confusing, because we only have one network defined (the "ovirtmgmt" network), and each of our 4 nodes shows it attached and indicated as functional. Our nodes are all CentOS 6.6 installations, with the ovirtmgmt bridge bound to eth2. If I go to Networks/ovirtmgmt under my datacenter, and click on the Networks tab at the top, select the ovirtmgmt network, and Hosts tab at the bottom, it shows that ovirtmgmt network is up on all 4 nodes. Even if I tell the VM to not attach itself to any networks at all, the machine fails to start with the same error. Have done a lot of google searching to no avail. We're also worried we did not get our gluster storage network set up right. We added the Storage Domain as type Data (Master)/GlusterFS, but it looks like Ovirt is using Fuse rather than the new libgfapi functionality - since we can see the gluster mounted /rhev/data-center/mnt/glusterSD/ with fuse.glusterfs, which would indicate we are not using the native Gluster integration. However, the latest info I can find seems to indicate that the gluster integration should be working in latest CentOS builds. Thanks for any help anyone can give me! The boss wants this demo sooner rather than later!

3 2

[OUTAGE] ovirt.org wiki outage report [07/12/14]
by Eyal Edri 07 Dec '14

07 Dec '14

fyi, ovirt.org wiki page was down today from 01:33:07 IST till 10:22 IST. REASON: ======= after logging into the openshift gear, seems like there was 99.9% space taken. RESOLUTION: =========== deleted some logs from $OPENSHIFT_MYSQL_DB_LOG_DIR, and restarted mysql using 'ctl_app restart'. space is still not great - at 84%, so we'll need to think soon how to resolve this. wiki is up now and seems to working well. infra - we should look into migrating to a new gear maybe? or extend again the existing one. Eyal.

1 0