- Users - oVirt List Archives

oVirt monitoring
by Ryan Nix 19 Oct '14

19 Oct '14

Hello, I was looking for something to monitor the resources managed by oVirt and not necessarily oVirt itself. It looks like there is a page on Nagios integration, however, I'm getting a 503 when trying to access the site. http://www.ovirt.org/Features/Nagios_Integration Does anyone have any recommendations on monitoring resources managed by oVirt? Thanks, Ryn

3 2

iSCSI - recommended LUN size?
by Anthony Alba 19 Oct '14

19 Oct '14

Some noob questions on iSCSI as I am doing an evaluation on NFS vs iSCSI. 1. Is there a best practices guide to LUN sizing for oVirt? E.g. N x 200G, N x 500G, N x 1 TB. http://www.ovirt.org/Quick_Start_Guide#Create_an_iSCSI_Data_Domain "oVirt platform supports iSCSI storage domains spanning multiple pre-defined Logical Unit Numbers (LUNs)." 2. Since we can extend the storage domain, I was thinking of multiples of 200G. Any reason not to do it this way? >From the mailing list: https://www.mail-archive.com/users@ovirt.org/msg13638.html "please note: - you can extend a *storage domain* by adding an extra LUN to it from ovirt-engine." 3. Any production experience with LIO target/targetcli as backend? Thanks! - Anthony

1 0

How to fix wrong speed of the Infiniband Interfaces?
by Arman Khalatyan 18 Oct '14

18 Oct '14

Hi, I am using ovirt 3.4.4-1. On the hosts I have 1Gbit(eth),10Gbit(eth) and 40Gbit(QDRInfiniband) interfaces. ib interface is used for the VM migration and iscsi disks. If I go to the network interfaces I can see right speed for eth cards. Unfortunately the IB interface speed is detected as 0b/s. This causes very hi load information on vm migrate face. Which is not true. IB can up to 2GB/s but already on 200MB/s load the hosts interfaces are overloaded. Where can I put the correct speed of IB interface? Thanks, Arman.

2 1

Setting up an ovirt environment
by Andy Michielsen 18 Oct '14

18 Oct '14

Hello, I have a question. I'm been playing around with ovirt an I'm loving it. Now I would like to set up a new environment with two or three nodes with a hosted engine, reliable and fast storage and flexible network with clearly separated storage, ovirt-management and multiple VM subnets. I would like to here what you guy' s would buy and set up. Kind regards.

2 1

failed engine-setup
by Fernando Fuentes 18 Oct '14

18 Oct '14

Team, I am trying to setup ovirt reports (Ovirt 3.4.4) and it fails at the engine setup with: [root@ovirt ~]# engine-setup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20141017174756-nlrnbe.log Version: otopi-1.2.3 (otopi-1.2.3-1.el6) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment customization --== PRODUCT OPTIONS ==-- Configure Reports on this host (Yes, No) [Yes]: Configure Data Warehouse on this host (Yes, No) [Yes]: --== PACKAGES ==-- [ INFO ] Checking for product updates... [ ERROR ] Yum: [u'msv-xsdlib-1.2-0.20050722.7.jpp6.noarch requires msv = 1.2-0.20050722.7.jpp6'] [ INFO ] Yum: Performing yum transaction rollback [ ERROR ] Failed to execute stage 'Environment customization': [u'msv-xsdlib-1.2-0.20050722.7.jpp6.noarch requires msv = 1.2-0.20050722.7.jpp6'] [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20141017174756-nlrnbe.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20141017174854-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed Any ideas why is failing? Do I have to install spacewalk-jpp-workaround? Regards.

1 1

oVirt 3.5
by Phil Daws 17 Oct '14

17 Oct '14

------=_Part_71034_1381705891.1413465621918 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hello: I now have two servers that I would like to install CentOS7 on and run the latest release of 3.5 on. Have taken a look at http://resources.ovirt.org/pub/ and there appears to be quite a few different versions. Would http://resources.ovirt.org/pub/ovirt-3.5-snapshot/ be the most appropriate release to use ? And if I may ask which document should I digest for installation ? Thanks, Phil ------=_Part_71034_1381705891.1413465621918 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><body><div style="font-family: courier new,courier,monaco,monospace,sans-serif; font-size: 10pt; color: #000000">Hello:<br><div><br></div>I now have two servers that I would like to install CentOS7 on and run the latest release of 3.5 on.  Have taken a look at http://resources.ovirt.org/pub/ and there appears to be quite a few different versions.  Would http://resources.ovirt.org/pub/ovirt-3.5-snapshot/ be the most appropriate release to use ? And if I may ask which document should I digest for installation ?<br><div><br></div>Thanks, Phil</div></body></html> ------=_Part_71034_1381705891.1413465621918--

2 3

migrating DC
by Fernando Fuentes 17 Oct '14

17 Oct '14

Team, If I move my cluster compatibility version from 3.3 to 3.4 can I migrate my DC compatibility version to 3.4 and cause no disruptions? My VDSM are all up to vdsm-4.14.17 on all of my hosts. Thank you for your help! Regards.

2 2

ovirt with freeIPA and docker
by Sven Kieske 17 Oct '14

17 Oct '14

Hi, interesting article: http://www.projectatomic.io/blog/2014/10/containerized-directory-services-w… But I wonder if this troubleshooting: http://www.ovirt.org/Troubleshooting#Adding_an_IPA_domain_to_ovirt_engine is required for all ovirt versions or just 3.5 with the AAA rewrite? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 3

USB UPS like APC BR1500GI connection to ovirt
by Juan Carlos YJ. Lin 17 Oct '14

17 Oct '14

--=_a6825201-5949-46cd-9db4-5f7dcb75687c Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, How I connect the usb prot UPS like APC BR1500GI to ovirt host to shutdown before power outage? Juan Carlos Lin Unisoft S.A. +595-993-288330 --------------------------------------------------- "Antes de imprimir, recuérdese de su compromiso con el Medio Ambiente" "Aviso: Este mensaje es dirigido para su destinatario y contiene informaciones que no pueden ser usadas por otras personas que no sean su(s) destinatario(s). La retransmisión del contenido no está autorizada fuera del contexto de su envío y a quien corresponde. El uso no autorizado de la información en este mensaje se halla penado por las leyes vigentes en todo el mundo. Si ha recibido este mensaje por error, por favor bórrala y notifique al remitente en la brevedad posible. El contenido de este mensaje no es responsabilidad de la Empresa y debe ser atribuido siempre a su autor. Gracias." --=_a6825201-5949-46cd-9db4-5f7dcb75687c Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Arial; font-size: 10pt; color: #000000'><span>Hi,<br><br>How I connect the usb prot UPS like APC BR1500GI to ovirt host to shutdown before power outage?<br><br><span name="x"></span>Juan Carlos Lin<br>Unisoft S.A.<br>+595-993-288330<span name="x"></span><br></span><br></div> <br> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <HTML lang="es"> <HEAD> <TITLE>System-wide Disclaimer</TITLE> </HEAD> <BODY>---------------------------------------------------<br>"Antes de imprimir, recuérdese de su compromiso con el Medio Ambiente"<br>"Aviso: Este mensaje es dirigido para su destinatario y contiene informaciones que no pueden ser usadas por otras personas que no sean su(s) destinatario(s). La retransmisión del contenido no está autorizada fuera del contexto de su envío y a quien corresponde. El uso no autorizado de la información en este mensaje se halla penado por las leyes vigentes en todo el mundo. Si ha recibido este mensaje por error, por favor bórrala y notifique al remitente en la brevedad posible. El contenido de este mensaje no es responsabilidad de la Empresa y debe ser atribuido siempre a su autor. Gracias." </BODY> </HTML><br> </body></html> --=_a6825201-5949-46cd-9db4-5f7dcb75687c--

1 0

Error adding NFS Storage Domain
by Sean O'Gorman 16 Oct '14

16 Oct '14

Hi, While trying to add a new storage domain I am getting the following error: Error while executing action New NFS Storage Domain: Network error during communication with the Host. Network connectivity between the hosts is up and fine, has anyone else experienced this issue? Regards, Sean -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.

1 0

Spice on Ovirt 3.4.4 Windows 2012 Guests
by Gary Lloyd 16 Oct '14

16 Oct '14

Hi We are currently running Ovirt 3.3.5 in production, currently our Windows Guests are using spice for the console. I have noticed that in our test environment running 3.4.4 that this option cannot be selected for Windows 2012 guests. Does anyone know what will happen to the console on VMs running windows 2012 if we upgrade to 3.4.4 on our production environment ? Will it simply not work resulting in us having to power down the affected VMs or will the existing VMs carry on working with the spice console setting ? Thanks *Gary Lloyd* ---------------------------------- IT Services Keele University -----------------------------------

2 2

qemu-rhev in centos 7
by Nathanaël Blanchet 15 Oct '14

15 Oct '14

Hello, native el7 qemu-kvm package is 1.2.x so that it is supposed to contain the missing flag in el6 0.12 one for live migration. I saw that qemu-kvm-rhev.el7 was also provided in the ovirt repo, but may be unuseful, in this case... what do you think ?(I didn't try livre migration yet with el7 native qemu)

2 2

delete snapshots or create a template make a huge impact on VMs on SPM-node
by Ricky Schneberger 15 Oct '14

15 Oct '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, When we do some tasks in ovirt as delete an snapshot or clone a machine or just want to make a machine template the impact on VMs residing on the SPM node is huge. Is there a way to prevent this? This is just normal tasks and we do this all the time. - -- Ricky Schneberger - ------------------------------------ DANGER! Human at keyboard! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlQkA0AACgkQOap81biMC2MfdwCdEe4PJs0OdQwqsrNVg4qmGwuJ Tp4An0rnDMjHf2JcS/lC7d4pBb3G9Jzw =5yO2 -----END PGP SIGNATURE-----

4 3

Re: [ovirt-users] ovirt network VLAN tagging
by Juan Pablo Lorier 15 Oct '14

15 Oct '14

Hi, It seems to me that it may be a switch configuration problem. The vms in the same host can talk to each other via the bridge, but if your switch is not configured to allow tagged traffic for vlans 50 and 60 (and all the way to the interface of the other host must allow tagged traffic for those vlans), you won't be able to get traffic. Regards,

1 0

Space not getting freed in storage domain after removing vm
by Chandrahasa S 15 Oct '14

15 Oct '14

Dear All, I have only one VM in my Storage domain of size actual is 1 GB, but my Storage domain show free 288 GB out of 499 GB. Any idea what is the issue. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

2 1

async vm start (python)
by Giulio Casella 15 Oct '14

15 Oct '14

Hi everybody, I'm trying to start a VM (using python sdk) asynchronously, but I obtain synchronous behaviour. The engine is RHEV-M version 3.4.1-0.31.el6ev. Here a snippet of code: --------------------------------------------------------- myvm = api.vms.get(name="VMNAME") retval = myvm.start(params.Action(async=True)) print ParseHelper.toXml(retval) --------------------------------------------------------- and this is what I get (retval): --------------------------------------------------------- <action> <async>true</async> <vm href="/api/vms/5aa66e96-5fdd-4562-9c7d-ae6f88e6805d" id="5aa66e96-5fdd-4562-9c7d-ae6f88e6805d"> [...cut..] </vm> <job href="/api/jobs/5c2326c7-f25c-432f-8848-c94e80dd173b" id="5c2326c7-f25c-432f-8848-c94e80dd173b"/> <status> <state>complete</state> </status> </action> --------------------------------------------------------- status of task is always "complete" and the operation take some time, few seconds to some tens of seconds (sync behaviour). Any ideas? Thanks in advance, Giulio

2 3

Enabling GlusterFS in production
by Eduardo Ramos 15 Oct '14

15 Oct '14

Hi friends! I have just upgraded from 3.2 to 3.4 and it was very nice. Everything ok! Now I want to enable Gluster Service to my cluster in production. I think follow this steps: * Install manually vdsm-gluster * Restart supervdsm and vdsmd * Enable Gluster Service in my Cluster. Could it cause any problem or downtime? Thanks.

2 1

Vlans and subnets
by Demeter Tibor 15 Oct '14

15 Oct '14

------=_Part_650053_579042154.1413309486419 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hello all, I've created a self-hosted ovirt engine with two node, but on the last steps the engine-setup could not attach the node to the "default" cluster. I think it was because I have different services on different vlans. I have vlan100 for glusterfs and vlan101 for vdsm hosts with different subnets. Also, I have an another connection (eth1) with different subnet for internet acces and this is the default route. I would like to separate ovirt services, networks and glusterfs to different vlans/subnets by security reasons. But I don't know what services need to be on same vlan/subnets. My questions/goals - which services need to connect to another ? - Is hosted engine's vm need to be on same network with gluster ? - Is hosted engine's vm need to be on same network with vdsm hosts? - I want to separate ovirt/gluster networks from ovirt VM-s/public internet access - I don't want to extra traffic on router Does anyone experience with this way? Thanks in advance Tibor ------=_Part_650053_579042154.1413309486419 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: times new roman, new york, times, se= rif; font-size: 12pt; color: #000000"><div><span style=3D"font-size: 12pt;"= >Hello all,</span></div><div><br></div><div>I've created a self-hosted ovir= t engine with two node, but on the last steps the engine-setup could not at= tach the node to the "default" cluster.</div><div>I think it was because I = have different services on different vlans.</div><div>I  have vlan100 = for glusterfs and vlan101 for vdsm hosts with different subnets. Also, I ha= ve an another connection (eth1) with different subnet for internet acces an= d this is the default route.</div><div><br></div><div><span style=3D"font-s= ize: 12pt;"></span><span style=3D"font-size: 12pt;">I would like to separat= e ovirt services, networks and glusterfs to different vlans/subnets by secu= rity reasons.</span></div><div>But I don't know what services need to be on= same vlan/subnets.</div><div><br></div><div>My questions/goals</div><div><= br></div><div>- which services need to connect to another ?</div><div> </di= v><div>- Is hosted engine's vm need to be on same network with gluster ?&nb= sp;</div><div>- Is hosted engine's vm need to be on same network with vdsm = hosts?</div><div>- I want to separate ovirt/gluster networks from ovirt VM-= s/public internet access</div><div>- <span style=3D"font-size: 12pt;">= I don't want to extra traffic on router </span></div><div><br></div><d= iv>Does anyone experience with this way?</div><div><br></div><div>Thanks in= advance</div><div><br></div><div>Tibor </div><div><br></div><div><br>= </div></div></body></html> ------=_Part_650053_579042154.1413309486419--

2 1

Packet loss
by Kyle Gordon 14 Oct '14

14 Oct '14

Evening all, I'm having major issues with a self hosted setup (oVirt 3.4.4 & CentOS 6.5) on Hetzner, with 2 subnets allocated to the server. Routing to and from the additional IP ranges is working as expected, and I can allocate any of the IPs to a virtual interface on the host and get connectivity, so from what I can tell the network routing side of things is correct. However, when I move any of the allocated IPs to any of the guests, I get 1 ICMP response before complete packet loss. This happens at all times, even with iptables completely unloaded and an Accept policy thoughout. The structure is just a basic bridge called ovirtmgmt that all interfaces are bound to. Guests that are affected can communicate with other guests on either of the two subnets, and also with the host, so the bridge is up and running, but when it comes to any traffic trying to egress by the default route, it comes to a halt. In addition, all the hosts have unique MACs, dmesg shows that the appropriate vnets are entering forwarding states and STP is disabled on the bridge. And just to confuse matters, one guest is working just fine - yet when the settings are replicated to any other host the new host still fails to work. Even if I put the working IP onto another guest, it fails to transfer any data. All I get is constant who-has requests on the host bridge whilst the guest looks for the next-hop. Has anyone experienced this before? Where's next on the list of places to look?! Regards Kyle -- Kyle Gordon - 2M1DIQ Web: http://lodge.glasgownet.com Jabber/Email/SIP: kyle(a)lodge.glasgownet.com

1 0

ISO_DOMAIN as iscsi storage type
by ml ml 14 Oct '14

14 Oct '14

Hello List, i am very unhappy with NFS for my ISO_DOMAIN domain. Can i simply remove my ISO_DOMAIN via NFS and add a ISO_DOMAIN via isci? My Setup: http://oi60.tinypic.com/2cmu7nm.jpg I once ran into a pitfall where i was not able to add a ISO DOMAIN anymore, so i would rather ask in advance if i can remove the ISO_DOMAIN and simply add it again via iscsi. Do i need to take care of anything here? Thanks, Mario

2 1

oVirt status in EL7
by Igor Gnatenko 14 Oct '14

14 Oct '14

Hi, What status of support EL7 in oVirt? I mean as host OS. -- -Igor Gnatenko

5 5

[Request for Mentors] oVirt Outreach Program for Women
by Brian Proffitt 14 Oct '14

14 Oct '14

All: Since my Sept. 19 request for mentors for the GNOME OPW project[1], I have had no responses from anyone to lend an effort on mentoring potential applicants. The application process has been opened and I know we have had at least one potential candidate[2] interested, and I would hate to turn people away because we did not have mentor(s) to assist them. The application deadline for OPW is Oct. 22, but because potential applicants are required to get involved with the community before they formally apply, it is very important we have some mentors in place as soon as possible. oVirt has an excellent community in place, and here's another chance to show that off! Peace, Brian [1] http://lists.ovirt.org/pipermail/devel/2014-September/008829.html [2] http://lists.ovirt.org/pipermail/devel/2014-September/008896.html -- Brian Proffitt Community Liaison oVirt Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC

3 3

How to mapping LDAP users in AAA
by lofyer 14 Oct '14

14 Oct '14

I've got a LDAP server without kerberos and I am trying to intergrate its users to oVirt-3.5 with AAA. ========================== /etc/ovirt-engine/aaa/example.properties: include = <openldap.properties> vars.user = cn=directory manager vars.password = mypassword vars.server = example.com #pool.default.ssl.startTLS = false #pool.default.ssl.truststore.file = /etc/ldap_tls/ca_cert.pem #pool.default.ssl.truststore.password = admin pool.default.serverset.single.server = ${global:vars.server} pool.default.auth.simple.bindDN = ${global:vars.user} pool.default.auth.simple.password = ${global:vars.password} ========================== This is my basic ldap infomation: ou=Groups | +---- cn=UserGroup1 | +---- cn=UserGroup2 ou=UserGroup1 | +---- cn=user1 | +---- cn=user2 ou=UserGroup2 | +---- cn=user3 | +---- cn=user4 ========================== Now I can see example.com in web portal but I cannot list users in UG1 or UG2. I find that I could map DN, ID NAME, DISPLAY in the config file. What should I add in the config file then?

3 6

Re: [ovirt-users] oVirt Power Management with Intel server board S2400BB RMM4
by Алексей Николаев 14 Oct '14

14 Oct '14

Thx for your help.От: Marek "marx" Grac Отправлено: ‎06.‎10.‎2014 19:38 Кому: Eli Mesika; Алексей Николаев Копия: users(a)ovirt.org Тема: Re: [ovirt-users] oVirt Power Management with Intel server board S2400BB RMM4 On 10/06/2014 05:27 PM, Eli Mesika wrote: > CCing Marek Grac on that > > ----- Original Message ----- >> From: "Алексей Николаев" <mail.griffon(a)gmail.com> >> To: users(a)ovirt.org >> Sent: Friday, October 3, 2014 1:51:35 PM >> Subject: [ovirt-users] oVirt Power Management with Intel server board S2400BB RMM4 >> >> Hi all! Can anyone advice me howto use ovirt power management with intel >> server board RMM4 module for HA? According to RMM4 manual, there is IPMI support, so it can be used with proper fence agent m,

1 1

oVirt 3.4 + Ipa Server
by Marcelo Donato 14 Oct '14

14 Oct '14

Hello, I've problems for utilization IPA Server with oVirt. Below is the error log and corresponding access, commands and log entries. Thanks for helping me. ********************************************************************* Ipa Server - 10.30.0.25 LSB Version: :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: CentOS Description: CentOS release 6.5 (Final) Release: 6.5 Codename: Final # rpm -qa | grep ipa ipa-server-3.0.0-37.el6.x86_64 ipa-pki-ca-theme-9.0.3-7.el6.noarch ipa-python-3.0.0-37.el6.x86_64 ipa-pki-common-theme-9.0.3-7.el6.noarch ipa-admintools-3.0.0-37.el6.x86_64 ipa-server-selinux-3.0.0-37.el6.x86_64 ipa-client-3.0.0-37.el6.x86_64 # dig _kerberos._tcp.din.uem.br ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.23.rc1.el6_5.1 <<>> _kerberos._ tcp.din.uem.br ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 34293 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_kerberos._tcp.din.uem.br. IN A ;; AUTHORITY SECTION: din.uem.br. 3600 IN SOA ns1.din.uem.br. root.din.uem.br. 2014100841 1800 900 60480 3600 ;; Query time: 1 msec ;; SERVER: 186.233.152.33#53(186.233.152.33) ;; WHEN: Thu Oct 9 14:19:05 2014 ;; MSG SIZE rcvd: 88 # dig _ldap._tcp.din.uem.br ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.23.rc1.el6_5.1 <<>> _ldap._tcp.din.uem.br ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 21167 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_ldap._tcp.din.uem.br. IN A ;; AUTHORITY SECTION: din.uem.br. 3600 IN SOA ns1.din.uem.br. root.din.uem.br. 2014100841 1800 900 60480 3600 ;; Query time: 1 msec ;; SERVER: 186.233.152.33#53(186.233.152.33) ;; WHEN: Thu Oct 9 14:20:16 2014 ;; MSG SIZE rcvd: 84 /var/log/dirsrv/slapd-DIN-UEM-BR/access ------------------------------------------------------------------------------------------------------------------------- conn=3 op=210 SRCH base="dc=din,dc=uem,dc=br" scope=2 filter="(&(|(objectClass=krbprincipalaux)(objectClass=krbprincipal))(krbPrincipalName= admin(a)DIN.UEM.BR))" attrs="krbPrincipalName krbCanonicalName ipaKrbPrincipalAlias krbUPEnabled k conn=3 op=210 RESULT err=0 tag=101 nentries=1 etime=0 conn=3 op=211 SRCH base="cn=DIN.UEM.BR,cn=kerberos,dc=din,dc=uem,dc=br" scope=0 filter="(objectClass=krbticketpolicyaux)" attrs="krbMaxTicketLife krbMaxRenewableAge krbTicketFlags" conn=3 op=211 RESULT err=0 tag=101 nentries=1 etime=0 conn=3 op=212 SRCH base="dc=din,dc=uem,dc=br" scope=2 filter="(&(|(objectClass=krbprincipalaux)(objectClass=krbprincipal)(objectClass=ipakrbprincipal))(|(ipaKrbPrincipalAlias=krbtgt/ DIN.UEM.BR(a)DIN.UEM.BR)(krbPrincipalName=krbtgt/DIN.UEM conn=3 op=212 RESULT err=0 tag=101 nentries=1 etime=0 conn=3 op=213 SRCH base="cn=global_policy,cn=DIN.UEM.BR,cn=kerberos,dc=din,dc=uem,dc=br" scope=0 filter="(objectClass=*)" attrs="krbMaxPwdLife krbMinPwdLife krbPwdMinDiffChars krbPwdMinLength krbPwdHistoryLength krbPwdMaxFailure krbPwdF conn=3 op=213 RESULT err=0 tag=101 nentries=1 etime=0 conn=50 fd=66 slot=66 connection from 10.30.0.23 to 10.30.0.25 conn=50 op=-1 fd=66 closed error 34 (Numerical result out of range) - B2 /var/log/ovirt-engine/engine-manage-domains.log ------------------------------------------------------------------------------------------------------------------------- 2014-10-09 11:23:05,901 INFO [org.ovirt.engine.core.utils.LocalConfig] Loaded file "/usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.conf". 2014-10-09 11:23:05,903 INFO [org.ovirt.engine.core.utils.LocalConfig] The file "/etc/ovirt-engine/engine.conf" doesn't exist or isn't readable. Will return an empty set of properties. 2014-10-09 11:23:05,904 INFO [org.ovirt.engine.core.utils.LocalConfig] Loaded file "/etc/ovirt-engine/engine.conf.d/10-setup-database.conf". 2014-10-09 11:23:05,905 INFO [org.ovirt.engine.core.utils.LocalConfig] Loaded file "/etc/ovirt-engine/engine.conf.d/10-setup-jboss.conf". 2014-10-09 11:23:05,906 INFO [org.ovirt.engine.core.utils.LocalConfig] Loaded file "/etc/ovirt-engine/engine.conf.d/10-setup-pki.conf". 2014-10-09 11:23:05,907 INFO [org.ovirt.engine.core.utils.LocalConfig] Loaded file "/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf". 2014-10-09 11:23:05,908 INFO [org.ovirt.engine.core.utils.LocalConfig] Loaded file "/etc/ovirt-engine/engine.conf.d/20-ovirt-engine-reports.conf". 2014-10-09 11:23:05,909 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_AJP_ENABLED" is "true". 2014-10-09 11:23:05,909 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_AJP_PORT" is "8702". 2014-10-09 11:23:05,909 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_APPS" is "engine.ear "/var/lib/ovirt-engine-reports/ovirt-engine-reports.war"". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_CACHE" is "/var/cache/ovirt-engine". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_CHECK_INTERVAL" is "1000". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_CONNECTION_TIMEOUT" is "300000". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_DATABASE" is "engine". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_DRIVER" is "org.postgresql.Driver". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_HOST" is "localhost". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_MAX_CONNECTIONS" is "100". 2014-10-09 11:23:05,910 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_MIN_CONNECTIONS" is "1". 2014-10-09 11:23:05,911 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_PASSWORD" is "***". 2014-10-09 11:23:05,911 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_PORT" is "5432". 2014-10-09 11:23:05,911 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_SECURED" is "False". 2014-10-09 11:23:05,911 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_SECURED_VALIDATION" is "False". 2014-10-09 11:23:05,911 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_URL" is "jdbc:postgresql://localhost:5432/engine?sslfactory=org.postgresql.ssl.NonValidatingFactory". 2014-10-09 11:23:05,911 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DB_USER" is "engine". 2014-10-09 11:23:05,912 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DEBUG_ADDRESS" is "". 2014-10-09 11:23:05,912 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_DOC" is "/usr/share/doc/ovirt-engine". 2014-10-09 11:23:05,912 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_ETC" is "/etc/ovirt-engine". 2014-10-09 11:23:05,912 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_FQDN" is "ovirtm.din.uem.br". 2014-10-09 11:23:05,912 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_GROUP" is "ovirt". 2014-10-09 11:23:05,912 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HEAP_MAX" is "1g". 2014-10-09 11:23:05,913 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HEAP_MIN" is "1g". 2014-10-09 11:23:05,913 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HTTPS_ENABLED" is "false". 2014-10-09 11:23:05,913 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HTTPS_PORT" is "None". 2014-10-09 11:23:05,913 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HTTPS_PROTOCOLS" is "SSLv3,TLSv1,TLSv1.1,TLSv1.2". 2014-10-09 11:23:05,913 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HTTP_ENABLED" is "false". 2014-10-09 11:23:05,913 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_HTTP_PORT" is "None". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_JAVA_MODULEPATH" is "/usr/share/ovirt-engine/modules:/var/lib/ovirt-engine-reports/modules". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_JVM_ARGS" is " -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath="/var/log/ovirt-engine/dump"". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_LOG" is "/var/log/ovirt-engine". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_LOG_TO_CONSOLE" is "false". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_MANUAL" is "/usr/share/ovirt-engine/manual". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PERM_MAX" is "256m". 2014-10-09 11:23:05,914 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PERM_MIN" is "256m". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI" is "/etc/pki/ovirt-engine". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_CA" is "/etc/pki/ovirt-engine/ca.pem". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_ENGINE_CERT" is "/etc/pki/ovirt-engine/certs/engine.cer". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_ENGINE_STORE" is "/etc/pki/ovirt-engine/keys/engine.p12". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_ENGINE_STORE_ALIAS" is "1". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_ENGINE_STORE_PASSWORD" is "***". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_TRUST_STORE" is "/etc/pki/ovirt-engine/.truststore". 2014-10-09 11:23:05,915 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PKI_TRUST_STORE_PASSWORD" is "***". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PROPERTIES" is " jsse.enableSNIExtension=false". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PROXY_ENABLED" is "true". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PROXY_HTTPS_PORT" is "443". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_PROXY_HTTP_PORT" is "80". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_REPORTS_UI" is "/var/lib/ovirt-engine/reports.xml". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_STOP_INTERVAL" is "1". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_STOP_TIME" is "10". 2014-10-09 11:23:05,916 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_TMP" is "/var/tmp/ovirt-engine". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_UP_MARK" is "/var/lib/ovirt-engine/engine.up". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_URI" is "/ovirt-engine". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_USER" is "ovirt". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_USR" is "/usr/share/ovirt-engine". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_VAR" is "/var/lib/ovirt-engine". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "ENGINE_VERBOSE_GC" is "false". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "JBOSS_HOME" is "/usr/share/jboss-as". 2014-10-09 11:23:05,917 INFO [org.ovirt.engine.core.utils.LocalConfig] Value of property "SENSITIVE_KEYS" is ",ENGINE_DB_PASSWORD,ENGINE_PKI_TRUST_STORE_PASSWORD,ENGINE_PKI_ENGINE_STORE_PASSWORD". 2014-10-09 11:23:39,328 INFO [org.ovirt.engine.core.domains.ManageDomains] Creating kerberos configuration for domain(s): din.uem.br 2014-10-09 11:23:39,357 INFO [org.ovirt.engine.core.domains.ManageDomains] Successfully created kerberos configuration for domain(s): din.uem.br 2014-10-09 11:23:39,357 INFO [org.ovirt.engine.core.domains.ManageDomains] Testing kerberos configuration for domain: din.uem.br 2014-10-09 11:23:39,572 ERROR [org.ovirt.engine.core.utils.kerberos.KerberosConfigCheck] Error: exception message: Cannot get a KDC reply 2014-10-09 11:23:39,577 ERROR [org.ovirt.engine.core.domains.ManageDomains] Failure while testing domain din.uem.br. Details: Kerberos error. Please check log for further details. ********************************************************************* oVirt Manager - 10.30.0.23 LSB Version: :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: CentOS Description: CentOS release 6.5 (Final) Release: 6.5 Codename: Final # rpm -qa | grep -i ovirt ovirt-engine-dwh-setup-3.4.0-2.el6.noarch ovirt-engine-dwh-3.4.0-2.el6.noarch ovirt-hosted-engine-ha-1.1.2-1.el6.noarch ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch ovirt-engine-cli-3.4.0.5-1.el6.noarch ovirt-engine-restapi-3.4.0-1.el6.noarch ovirt-engine-dbscripts-3.4.0-1.el6.noarch ovirt-release-11.2.0-1.noarch ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch ovirt-host-deploy-1.2.0-1.el6.noarch ovirt-engine-reports-setup-3.4.0-2.el6.noarch ovirt-engine-lib-3.4.0-1.el6.noarch ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch ovirt-log-collector-3.4.1-1.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch ovirt-host-deploy-java-1.2.0-1.el6.noarch ovirt-engine-tools-3.4.0-1.el6.noarch ovirt-engine-userportal-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch ovirt-engine-backend-3.4.0-1.el6.noarch ovirt-engine-reports-3.4.0-2.el6.noarch ovirt-engine-setup-base-3.4.0-1.el6.noarch ovirt-iso-uploader-3.4.0-1.el6.noarch ovirt-image-uploader-3.4.0-1.el6.noarch ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch ovirt-engine-setup-3.4.0-1.el6.noarch ovirt-engine-3.4.0-1.el6.noarch engine-manage-domains add --domain=din.uem.br --provider=ipa --user=admin Enter password: Error: exception message: Cannot get a KDC reply Failure while testing domain din.uem.br. Details: Kerberos error. Please check log for further details. At. Donato. -- Ao encaminhar esta mensagem, por favor: 1. Apague o meu e-mail e o meu nome. 2. Apague também os endereços dos amigos antes de reenviar 3. Use Cco ou Bcc para enviar mensagens! Dificulte a disseminação de vírus e spam.

4 7