- Users - oVirt List Archives

Re: [ovirt-users] Host installation failed. Command returned failure code 1 during ssh session
by Ryan Nix 13 Oct '14

13 Oct '14

I swear that is what I'm clicking on. One of the messages: ovirt Failed to execute stage 'Setup validation': Cannot locate gluster packages, possible cause is incorrect channels. Does that mean I need to install the oVirt yum repositories on the Gluster bricks themselves? On Mon, Oct 13, 2014 at 11:37 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote: > > You are still do not look in the right location, to ease your work please > understand that you can see specific host related messages by using the > Hosts tab, select the host, go to lower tabs, select "Events" tab. > > When you select the generic events you may lose messages quickly as you > see messages from all components. > > Anyway, please read the message and act upon. > > ----- Original Message ----- > > From: "Ryan Nix" <ryan.nix(a)gmail.com> > > To: "Alon Bar-Lev" <alonbl(a)redhat.com> > > Sent: Monday, October 13, 2014 7:32:41 PM > > Subject: Re: [ovirt-users] Host installation failed. Command returned > failure code 1 during ssh session > > > > Here it is, although I'm not seeing this: 2014-10-13 10:07:57 ERROR > > otopi.context context._executeMethod:161 Failed to execute stage 'Setup > > validation': > > > > > > > > > > On Mon, Oct 13, 2014 at 11:20 AM, Alon Bar-Lev <alonbl(a)redhat.com> > wrote: > > > > > > > > > > > ----- Original Message ----- > > > > From: "Ryan Nix" <ryan.nix(a)gmail.com> > > > > To: "Alon Bar-Lev" <alonbl(a)redhat.com> > > > > Cc: users(a)ovirt.org > > > > Sent: Monday, October 13, 2014 7:10:09 PM > > > > Subject: Re: [ovirt-users] Host installation failed. Command returned > > > failure code 1 during ssh session > > > > > > > > I'm not seeing that in Events through the UI. > > > > > > Please go to Hosts > > > Then select the host you are deploying. > > > And at lower tab go to Events tab, it is at the right. > > > > > > > > > > > > > > > > > > > On Mon, Oct 13, 2014 at 10:50 AM, Alon Bar-Lev <alonbl(a)redhat.com> > > > wrote: > > > > > > > > > You should see this in UI: > > > > > > > > > > 2014-10-13 10:07:57 ERROR otopi.context context._executeMethod:161 > > > Failed > > > > > to execute stage 'Setup validation': Cannot locate gluster > packages, > > > > > possible cause is incorrect channels > > > > > > > > > > Please confirm you know where to look. > > > > > > > > > > > > > > >

2 1

[Users] How to See Ovirt Console From a Remote Windows Host
by Jon Forrest 13 Oct '14

13 Oct '14

I know that this is simple for some of you, but I also know from Googling around that lots of people have had trouble seeing their ovirt console from a remote Windows host. Below I describe what finally worked for me. I hope this helps somebody avoid wasting as much time as I did today. I'm a fairly experienced VMWare user who's learning ovirt. I just installed an all-in-one ovirt server and copied a CentOS 6.5 iso into it. I then tried to boot a new VM but soon learned that console access is different in ovirt than on VMWare. I then spent over an hour trying the various documented ways to view a remote console using Spice on my Windows 7 desktop. I even tried using a Linux VM to see if the Firefox plugin for Spice would work. Nothing. What finally worked was installing the virt-viewer Windows client (http://virt-manager.org/download/) Then, I opened the ovirt Administration Portal in Firefox running on my Windows 7 desktop. I created a new VM and configured it the way I wanted. Then, from the "Virtual Machines" tab, I started the new VM. Pretty soon the little console icon turned green so I clicked on it. I got the prompt from Firefox asking me what app I wanted to associate with the ".vv" URL that opened when I clicked on the console icon. I browsed around and selected \Program Files\VirtViewer\bin\remote-viewer.exe which is from the virt-viewer client package I installed above. I told Firefox to always use this app for this kind of file. This works great! I was able to boot the CentOS system and install it with no problems. Good luck! Jon Forrest

4 4

Host installation failed. Command returned failure code 1 during ssh session
by Ryan Nix 13 Oct '14

13 Oct '14

Hi, I'm trying to use oVirt 3.4 to manage a simple Gluster 3.5.2 node setup. However, I can't seem to add either node (there are only two). I keep getting the following in the log: Host installation failed. Command returned failure code 1 during ssh session Redhat lists the answer on their customer portal page, however, I can't see the answer unless I purchase RHEL. Is anyone familiar with this error? https://access.redhat.com/solutions/514633 Thanks! Ryan

2 7

disk moving issue
by Fernando Fuentes 13 Oct '14

13 Oct '14

Team, I am having issues moving a disk from one storage domain to another. This use to work fine and now it does not... Here is what I got from the logs... 2014-10-13 09:59:53,940 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.DeleteImageGroupVDSCommand] (org.ovirt.thread.pool-6-thread-25) [3ccfa4be] Command DeleteImageGroupVDSCommand( storagePoolId = e131c251-9998-42b4-b05b-851b49549d9a, ignoreFailoverLimit = false, storageDomainId = fa46ad1f-623c-4793-83b8-b1fdae268a9b, imageGroupId = f0e4655c-f089-4cee-83d8-c4b63ddffab9, postZeros = false, forceDelete = false) execution failed. Exception: IrsOperationFailedNoFailoverException: IRSGenericException: IRSErrorException: Image does not exist in domain: 'image=f0e4655c-f089-4cee-83d8-c4b63ddffab9, domain=fa46ad1f-623c-4793-83b8-b1fdae268a9b' 2014-10-13 09:59:53,977 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-6-thread-25) Correlation ID: 3fa88f0b, Job ID: dea5edb4-9180-4031-add6-9077c9ede757, Call Stack: null, Custom Event ID: -1, Message: User admin have failed to move disk Win7-Test-Base_Disk1 to domain virt-images-a. Any ideas on how I can go by fixing this issue? I am running: ovirt-engine 3.4.0-1.el6 vdsm.x86_64 4.14.6-0.el6 ovirt-engine-cli 3.4.0.5-1.el6 All is running on Centos 6.5 x86_64 Regards, -- Fernando Fuentes Technical Lead & Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-722-4222 Fax: 713-300-5688

1 1

LDAP_Quick_Start on CentOS 6.5
by ml ml 13 Oct '14

13 Oct '14

Hello, the LDAP_Quick_Start guid from http://www.ovirt.org/LDAP_Quick_Start does not work for me on CentOS 6.5 i get this error at step 3.): ----------------------------------------- # ldapadd -H ldapi:/// -Y EXTERNAL -f memberof.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 adding new entry "cn={0}module,cn=config" ldap_add: Naming violation (64) Step 2) showed some duplicated errors, too: ------------------------------------------------------------------ [root@ovirt ~]# ldapadd -H ldapi:/// -Y EXTERNAL -f /etc/openldap/schema/cosine.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 adding new entry "cn=cosine,cn=schema,cn=config" ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "0.9.2342.19200300.100.1.2" [root@ovirt ~]# ldapadd -H ldapi:/// -Y EXTERNAL -f /etc/openldap/schema/inetorgperson.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 adding new entry "cn=inetorgperson,cn=schema,cn=config" ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: "2.16.840.1.113730.3.1.1" Any idea how to fix this? Thanks, Mario

5 6

shortcut keys
by Fernando Fuentes 13 Oct '14

13 Oct '14

Team, New here to the list... Been using ovirt for some time now.... I just updated from 3.3.5 to 3.4.1. We have Windows 7 Guest and use putty to connect to our DB System. We use specific hot keys set in our termcap, etc... To be straight to the point... on oVirt branch 3.3.XX the hotkeys "Shift + F8" & "Shift + F9" where capture by our terminals and where been read correctly... I just updated oVirt to 3.4.1 and all went fine EXCEPT =] That now those hotkeys are no longer working... Running putty to our DB server via ssh and than running the command "read" does nothing... It reads all hotkeys and key combinations from F1 to F12 and Shift F1 to F7 and skips F8 and F9... What changed on oVirt 3.4.1 that I can no longer use this hotkeys? I also try to use them on windows and they are just not coming though at all... It seems to me that spice is catching the key sequence and capturing it before delivering it to the guest.... My data center/cluster runs on Centos 6.5 x86_64 All have 96GB of RAM and all have the same CPU Family... My ovirt manager runs as well on Centos 6.5 x86_64 on a different hosts that runs luci/kvm for HA clustering. Any ideas? -- Fernando Fuentes Technical Lead & Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-462-8081 Fax: 713-462-0527

2 3

Spice
by suporte＠logicworks.pt 13 Oct '14

13 Oct '14

------=_Part_15551_1030036124.1412854993204 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable I=C2=B4m trying to install virt-viewer on a windows server 2008R2, with IE1= 0.=20 I'm running oVirt 3.4.1-1.fc19. Installed virt-viewer-x64-1.0.=20 When click on the console IE10 crashes.=20 Don't see any firewall blocking ports.=20 Any idea?=20 --=20 Jose Ferradeira=20 http://www.logicworks.pt=20 ------=_Part_15551_1030036124.1412854993204 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Times New Roman; font-size: 10pt; co= lor: #000000"><div>I=C2=B4m trying to install virt-viewer on a windows serv= er 2008R2, with IE10.<br></div><div>I'm running oVirt 3.4.1-1.fc19. Install= ed virt-viewer-x64-1.0.<br></div><div>When click on the console IE10 crashe= s.<br></div><div>Don't see any firewall blocking ports.<br></div><div><br><= /div><div>Any idea?<br></div><div><br></div><div>-- <br></div><div><span na= me=3D"x"></span><hr style=3D"width: 100%; height: 2px;" data-mce-style=3D"w= idth: 100%; height: 2px;">Jose Ferradeira<br>http://www.logicworks.pt<br><s= pan name=3D"x"></span><br></div></div></body></html> ------=_Part_15551_1030036124.1412854993204--

3 7

New Feature: engine NIC health check
by Martin Mucha 13 Oct '14

13 Oct '14

Hi, here's link for new feature, related to monitoring engine's NIC, trying to detect failure on engine itself and it that case block fencing. http://www.ovirt.org/Features/engine_NIC_health_check thanks for every input, namely for one addressing some of opened issues. M.

3 3

Custom Cloud-Init script only partially executing
by Chris Routh 13 Oct '14

13 Oct '14

I'm trying to get the custom cloud-init script section in my site to run. My goal is to have the VM run 'yum update', add the PuppetLabs repository, and then install the latest puppet agent, and join it to Puppet. Following the docs for oVirt and Cloud-Init I have this: BEGIN SCRIPT ======================= yum_repos: # The name of the repository puppetlabs-release: baseurl: http://yum.puppetlabs.com/puppetlabs-release-el-6.noarch.rpm enabled: true failovermethod: priority gpgcheck: true gpgkey: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-puppetlabs name: Puppet Labs repository for Enterprise Linux 6 # Upgrade the instance on first boot package_upgrade: true # Install additional packages on first boot packages: - puppet # Automatically setup and run puppetd puppet: conf: agent: server: "puppet.example.com" certname: "%f" ca_cert: | -----BEGIN CERTIFICATE----- < My Cert > -----END CERTIFICATE----- ======================= END SCRIPT However what I end up with from this is: - No Yum update - No added repository - Puppet gets installed from the default repos - No attempt to join According to the cloud-init docs my code is correct, however oVirt is not respecting anything, with the sole exception being the 'packages:' argument. Can someone please explain? Also, I have combed the script and ensured that the indentation was 4 spaces, and not tabs. I noted that previous users in this mailing list have had that issue before.

2 4

OSD integration problem
by 黄川 12 Oct '14

12 Oct '14

------=_Part_200037_1297621156.1413011341718 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: base64 SGksYWxsCkkgdXNlIG9WaXJ0IDMuNC40IC4gIEkgd2FudCBpbnRlZ3JhdGUgdGhlIE9TTiBpbnQg b1ZpcnQuSSBoYWQgc29tZSBwcm9ibGVtcy4KRm9yIGV4YW1wbGUsIEkgaW1wb3J0ZWQgYSBuZXR3 b3JrIG5hbWVkICdwcml2YXRlJyBmcm9tIG9wZW5zdGFjayBuZXV0cm9uLiBUaGVuIHVzZSB0aGUg bmV0d29yayBpbiBhIFZNJ3MgTklDLgpUaGUgdmRzbSdzIHByb2JsZW0gaXMgImxpYnZpcnRFcnJv cjogQ2Fubm90IGdldCBpbnRlcmZhY2UgTVRVIG9uICdwcml2YXRlJzogTm8gc3VjaCBkZXZpY2Ui IC4KCgpUaGUgZW52aXJvbm1lbnQgaXM6CjEuIG9wZW5zdGFjayBuZXV0cm9uIHZlcnNpb24gaXMg aWNlaG91c2UuCjIuIHRoZSBvdmlydCBub2RlIGhhcyBpbnN0YWxsZWQgbmV1dHJvbiBhbmQgYWdl bnQuCgoKV2hhdCdzIHRoZSBwcm9ibGVtPw== ------=_Part_200037_1297621156.1413011341718 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: base64 PGRpdiBzdHlsZT0ibGluZS1oZWlnaHQ6MS43O2NvbG9yOiMwMDAwMDA7Zm9udC1zaXplOjE0cHg7 Zm9udC1mYW1pbHk6QXJpYWwiPjxkaXY+SGksYWxsPC9kaXY+PGRpdj5JIHVzZSBvVmlydCAzLjQu NCAuICZuYnNwO0kgd2FudCZuYnNwO2ludGVncmF0ZSB0aGUgT1NOIGludCBvVmlydC5JIGhhZCBz b21lIHByb2JsZW1zLjwvZGl2PjxkaXY+Rm9yIGV4YW1wbGUsIEkgaW1wb3J0ZWQgYSBuZXR3b3Jr IG5hbWVkICdwcml2YXRlJyBmcm9tIG9wZW5zdGFjayBuZXV0cm9uLiBUaGVuIHVzZSB0aGUgbmV0 d29yayBpbiBhIFZNJ3MgTklDLjwvZGl2PjxkaXY+VGhlIHZkc20ncyBwcm9ibGVtIGlzICJsaWJ2 aXJ0RXJyb3I6IENhbm5vdCBnZXQgaW50ZXJmYWNlIE1UVSBvbiAncHJpdmF0ZSc6IE5vIHN1Y2gg ZGV2aWNlIiAuPC9kaXY+PGRpdj48YnI+PC9kaXY+PGRpdj5UaGUgZW52aXJvbm1lbnQgaXM6PC9k aXY+PGRpdj4xLiBvcGVuc3RhY2sgbmV1dHJvbiB2ZXJzaW9uIGlzIGljZWhvdXNlLjwvZGl2Pjxk aXY+Mi4gdGhlIG92aXJ0IG5vZGUgaGFzIGluc3RhbGxlZCBuZXV0cm9uIGFuZCBhZ2VudC48L2Rp dj48ZGl2Pjxicj48L2Rpdj48ZGl2PldoYXQncyB0aGUgcHJvYmxlbT88L2Rpdj48L2Rpdj48YnI+ PGJyPjxzcGFuIHRpdGxlPSJuZXRlYXNlZm9vdGVyIj48c3BhbiBpZD0ibmV0ZWFzZV9tYWlsX2Zv b3RlciI+PHNwYW4gdGl0bGU9Im5ldGVhc2Vmb290ZXIiPjxzcGFuIGlkPSJuZXRlYXNlX21haWxf Zm9vdGVyIj48YSBocmVmPSIjIiB0YXJnZXQ9Il9ibGFuayI+PC9hPjwvc3Bhbj48L3NwYW4+DQo8 L3NwYW4+PC9zcGFuPg== ------=_Part_200037_1297621156.1413011341718--

2 1

Failed to change disk (CD) in VM
by Nathan Llaneza 12 Oct '14

12 Oct '14

Hello All, I am testing out oVirt 3.5 rc5 and their appears to be a problem when I try to change CDs on a live VM. I get the error message "Error while executing action Change CD: Internal Engine Error.". This is a very basic setup. I pushed through the engine install on a fully patched CentOS 6.5 machine; The hypervisor is CentOS 7. I have a remote ISO / NFS share. Everything else appears to be right; so I hope it is not something that I am doing... A little about the hypervisor: OS: RHEL - 7 - 0.1406.el7.centos.2.5 Kernel : 3.10.0 - 123.8.1.el7.x86_64 KVM: 1.5.3 - 60.el7_0.2 Libvirt: libvirt-1.1.1-29.el7_0.3 VDSM: vdsm-4.16.7-4.git34f961b.el7 Thanks for everything. BTW I like the new look of 3.5.

3 2

ovirt-hosted-engine-setup with answer file
by Finstrle, Ludek 10 Oct '14

10 Oct '14

2 1

Can't migrate vm from host-rhel7 to host-rhel6 in 3.5
by Xie, Chao 10 Oct '14

10 Oct '14

--_000_EE4D679B9474414187D2E27D8B6890F6936426G08CNEXMBPEKD03g0_ Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SGksQWxsDQogICAgICAgICBJIHRlc3QgbWlncmF0aW9uIGluIHRoZSAzLjUgYW5kIGZvdW5kIGEg Y2FzZToNCkluIHRoZSBlbnZpcm9ubWVudCB0aGVyZSBhcmUgdHdvIGhvc3RzOiByaGVsNiBhbmQg cmhlbDcuDQppdCBpcyBzdWNjZXNzZnVsIHRvIG1pZ3JhdGUgdm0gZnJvbSByaGVsNiB0byByaGVs NywgYnV0IGZhaWxlZCBmcm9tIHJoZWw3IHRvIHJoZWw2Lg0KVGhlIGVycm9yIG1lc3NhZ2UgaXMN Ck1pZ3JhdGlvbiBmYWlsZWQgZHVlIHRvIEVycm9yOiBGYXRhbCBlcnJvciBkdXJpbmcgbWlncmF0 aW9uIChWTTogdm1fY3JlYXRlZF9vbl9yaGVsNiwgU291cmNlOiByaGVsLTcsIERlc3RpbmF0aW9u OiByaGVsLTYpLg0KDQpEb2VzIHNvbWVib2R5IGZpbmQgdGhlIHNhbWUgZXJyb3I/DQo= --_000_EE4D679B9474414187D2E27D8B6890F6936426G08CNEXMBPEKD03g0_ Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dgb2312"> <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"ZH-CN" link=3D"blue" vlink=3D"purple" style=3D"text-justify-t= rim:punctuation"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">Hi,All<o:p></o:p></span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">     &= nbsp;   I test migration in the 3.5 and found a case:  <o:p></o:p></span></p> <p class=3D"MsoNormal" style=3D"text-indent:21.0pt"><span lang=3D"EN-US">In= the environment there are two hosts: rhel6 and rhel7.<o:p></o:p></span></p= > <p class=3D"MsoNormal" style=3D"text-indent:21.0pt"><span lang=3D"EN-US">it= is successful to migrate vm from rhel6 to rhel7, but failed from rhel7 to = rhel6.<o:p></o:p></span></p> <p class=3D"MsoNormal" style=3D"text-indent:21.0pt"><span lang=3D"EN-US">Th= e error message is <o:p></o:p></span></p> <p class=3D"MsoNormal" style=3D"text-indent:21.0pt"><span lang=3D"EN-US" st= yle=3D"font-family:"Arial Unicode MS","sans-serif";colo= r:white;background:#666666">Migration failed due to Error: Fatal error duri= ng migration (VM: vm_created_on_rhel6, Source: rhel-7, Destination: rhel-6).<o:p></o:p></span></p> <p class=3D"MsoNormal" style=3D"text-indent:21.0pt"><span lang=3D"EN-US" st= yle=3D"font-family:"Arial Unicode MS","sans-serif";colo= r:white;background:#666666"><o:p> </o:p></span></p> <p class=3D"MsoNormal" style=3D"text-indent:21.0pt"><span lang=3D"EN-US" st= yle=3D"font-size:14.0pt">Does somebody find the same error?<o:p></o:p></spa= n></p> </div> </body> </html> --_000_EE4D679B9474414187D2E27D8B6890F6936426G08CNEXMBPEKD03g0_--

2 1

Get involved in oVirt integration! October edition
by Sandro Bonazzola 10 Oct '14

10 Oct '14

Hi, have you got some free time and do you want to get involved in oVirt integration? Here are a couple of bugs you can hopefully fix in less that one day or you can just try to reproduce providing info: Bug 1080823 - [RFE] make override of iptables configurable when using hosted-engine Bug 1065350 - hosted-engine should prompt a question at the user when the host was already a host in the engine Bug 1059952 - hosted-engine --deploy (additional host) will fail if the engine is not using the default self-signed CA Bug 1073421 - [RFE] allow additional parameter for engine-backup to omit audit_log data You don't have programming skills but you want to contribute? Here are some bugs you can take care of, also without writing a line of code: Bug ID Status Whiteboard Summary 1074302 POST integration engine-upgrade-check has no man page 1131828 NEW integration Test upgrade path from Fedora 19 with oVirt 3.5.z to Fedora 20 1118354 NEW integration [RFE] Automated testing should prevent leaking sensitive data 1120585 NEW integration update image uploader documentation 1120586 NEW integration update iso uploader documentation 1120588 NEW integration update log collector documentation 1083104 NEW integration engine-setup --offline does not update versionlock 1074301 NEW infra [RFE] ovirt-shell has no man page Do you prefer to write on the wiki? Bug ID Status Whiteboard Summary 1142671 POST docs Feature page: CommandCoordinator needs to be updated 1142649 POST docs Feature page: AdvancedForemanIntegration needs to be updated 1111066 NEW docs oVirt Hardening Guide 1142652 NEW docs Feature page: DetailedHostPMProxyPreferences needs to be updated 1142616 NEW docs Feature page: Gluster Volume Capacity needs to be updated 1142623 NEW docs Feature page: AAA 3.5 needs to be updated 1142639 NEW docs Feature page: Features/Design/JsonRpc needs to be updated 1142662 NEW docs Feature page: PMHealthCheck needs to be updated 1142665 NEW docs Feature page: Custom Fencing needs to be updated 1142806 NEW docs Feature page: Node Hosted Engine needs to be updated 1142814 NEW docs Feature page: oVirt Appliance needs to be updated 1142822 NEW docs Feature page: Support blkio SLA features needs to be updated 1142846 NEW docs Feature page: oVirt Scheduler API needs to be updated 1142803 NEW docs Feature page: Generic Node Registration needs to be updated 1142783 NEW docs Feature page: Separate DWH Host needs to be updated Is this the first time you try to contribute to oVirt project? You can start from here [1][2]! Don't know gerrit very well? You can find some more docs here [3]. Any other question about development? Feel free to ask on devel(a)ovirt.org or on irc channel[4]. [1] http://www.ovirt.org/Develop [2] http://www.ovirt.org/Working_with_oVirt_Gerrit [3] https://gerrit-review.googlesource.com/Documentation [4] http://www.ovirt.org/Community -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Help me with rhev VM console
by Krishna Botlagunta 10 Oct '14

10 Oct '14

--_000_D0532FE0105D2KrishnaBotlaguntahdscom_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hi, This is Kishore Botlagunta, running RHEV on Red Hat 6.5. Installed RHEV 3.3 manager and a host. I created a VM and mounted a DVD to = the VM and powered on. Tried open a console either SPICE and VNC both ways = it is not working VNC: Native console: Unable to open the graphic server SPICE: HTML5 browser windows: It opened a Windows but the screen is blank. Can you please give me any thoughts what I=92m doing wrong. Thanks, Kishore --_000_D0532FE0105D2KrishnaBotlaguntahdscom_ Content-Type: text/html; charset="Windows-1252" Content-ID: <AD7FA996AEA6DF49899A2F006F8CCAB9(a)hds.com> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-lin= e-break: after-white-space; color: rgb(0, 0, 0); font-size: 14px; font-fami= ly: Calibri, sans-serif;"> <div>Hi,</div> <div><br> </div> <div>This is Kishore Botlagunta, running RHEV on Red Hat 6.5.</div> <div><br> </div> <div>Installed RHEV 3.3 manager and a host. I created a VM and mounted a DV= D to the VM and powered on. Tried open a console either SPICE and VNC both = ways it is not working</div> <div><br> </div> <div>VNC: Native console: Unable to open the graphic server</div> <div><br> </div> <div>SPICE: HTML5 browser windows: It opened a Windows but the screen is bl= ank.</div> <div><br> </div> <div>Can you please give me any thoughts what I=92m doing wrong.</div> <div><br> </div> <div>Thanks,</div> <div>Kishore</div> <br> </body> </html> --_000_D0532FE0105D2KrishnaBotlaguntahdscom_--

2 3

ovirt network VLAN tagging
by qiaomin032＠sina.com 10 Oct '14

10 Oct '14

--=-sinamail_alt_0d8e0183c5834bc53f8176aab2891d85 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: base64 Content-Disposition: inline IDEuDQpDcmVhdGUgYSBuZXcgbG9naWNhbCBuZXR3b3JrIGZyb20gdGhlIG5ldHdvcmtzIG1haW4g dGFiOiBkZWZpbmUgaXRzDQoNCmRhdGEtY2VudGVyIGFuZCBzZXQgaXRzIHZsYW4taWQgdG8gNTAg KHRoZQ0KVk0gbmV0d29yayBjaGVja2JveCBzaG91bGQgYmUgY2hlY2tlZCkNCg0KMi4gQ2xpY2sg b24gdGhlIGNyZWF0ZWQgbmV0d29yayBpbiB0aGUNCm5ldHdvcmtzIG1haW4gdGFiIC0tLT4gU2Vs ZWN0IHRoZQ0KDQogJ0NsdXN0ZXJzJyBzdWItdGFiIGFuZCAtLS0+IGNsaWNrIG9uDQonQXNzaWdu L1VuYXNzaWduIE5ldHdvcmsnIGFuZA0KDQogYXR0YWNoIHRoZSBuZXR3b3JrIHRvIHRoZSBjbHVz dGVyICh3aGljaA0KY29udGFpbnMgdGhlIGhvc3RzIHRoYXQgYXJlDQoNCiBleHBlY3RlZCB0byBy dW4gdGhlIFZNcykuDQoNCiAzLg0KQ2xpY2sgb24gJ2hvc3RzJyBzdWItdGFiIG9mIHRoZSBuZXR3 b3JrIG1haW4gdGFiIGZvciB0aGUgc2FtZQ0KDQogbmV0d29yay4gWW91IHNob3VsZCBiZSBhYmxl IHRvIHNlZSB0aGUgY2x1c3RlcidzDQpob3N0cy4gU2VsZWN0IGEgaG9zdA0KDQogYW5kDQpjbGlj ayBvbiAnU2V0dXAgTmV0d29ya3MnLg0KDQo0LiBJbiB0aGUgJ3NldHVwIG5ldHdvcmtzJyBkaWFs b2cgeW91IHdvdWxkDQpzZWUgdGhlIGhvc3QncyBpbnRlcmZhY2VzIG9uDQoNCiB0aGUNCmxlZnQg c2lkZSBhbmQgdGhlIGxvZ2ljYWwgbmV0d29ya3MgZGVmaW5pdGlvbiBvbiB0aGUgcmlnaHQuDQoN CkRyYWcgdGhlIG5ldHdvcmsgb24gdG9wIG9mIGFuIGludGVyZmFjZSwgb3INCmZpcnN0IGRyYWcg YSBuaWMgb24gdG9wIG9mDQoNCiBhbm90aGVyIHRvIGNyZWF0ZSBhIGJvbmQgYW5kIHRoZW4gZHJh ZyB0aGUNCm5ldHdvcmsgdG8gdGhhdCBib25kLg0KDQogQQ0KY29tbWFuZCB3aWxsIGJlIHNlbnQg ZnJvbSB0aGUgZW5naW5lIHRvIHRoZSB2ZHNtIG9uIHRoZSBob3N0IHRvDQoNCiBjb25maWd1cmUg dGhlIGRlc2lyZWQgbmV0d29yayBjb25maWd1cmF0aW9uLg0KDQogNS4NCkluIG9yZGVyIHRvIHBl cnNpc3QgdGhlIG5ldHdvcmsgY29uZmlndXJhdGlvbiBvbiB0aGUgaG9zdCB5b3UgY2FuDQoNCiBj aGVjayB0aGUgJ3NhdmUgbmV0d29yayBjb25maWd1cmF0aW9uJyBmcm9tIDQuDQoNCiANCg0KSSBm b2xsb3dlZCB0aGUgc3RlcHMgYWJvdmUgdG8gY3JlYXRlIHR3bw0KbmV0d29ya3MsIHZsYW4gdGFn Z2luZyBuYW1lZWQgNTAgYW5kIDYwLiBNeSBFbmdpbmUgaGFzIHR3byBob3N0cywgdGhhdCBpcywg dHdvDQpub2Rlcy4gQW5kIEkgY3JlYXRlZCBzb21lIHZtcy4gVGhlIHZtcyB3aGljaCB1c2luZyBk aWZmZXJlbnQgbmV0d29ya3MgY2FuIG5vdA0KY29tbXVuaWNhdGUgd2l0aCBlYWNoIG90aGVyLCB0 aGlzIGlzIHJpZ2h0LiBCdXQgdGhlcmUgaXMgYSBxdWVzdGlvbjogdGhlIHZtcw0KdXNpbmcgdGhl IHNhbWUgbmV0d29yayBhbmQgaW4gZGlmZmVyZW50IGhvc3RzIGNhbiBub3QgY29tbXVuaWNhdGUg d2l0aCBlYWNoDQpvdGhlciwgYnV0IHRoZSB2bXMgdXNpbmcgdGhlIHNhbWUgbmV0d29yayBhbmQg aW4gdGhlIHNhbWUgaG9zdCBjYW4gY29tbXVuaWNhdGUNCndpdGggZWFjaCBvdGhlci4gQ291bGQg eW91IHBsZWFzZSBleHBsYWluIHRoZSByZWFzb24gZm9yIG1lIGFuZCBoZWxwIG1lIHNvbHZlDQp0 aGlzIHByb2JsZW0/ --=-sinamail_alt_0d8e0183c5834bc53f8176aab2891d85 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: base64 Content-Disposition: inline PGRpdiBpZD0iIj48cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBsYW5nPSJFTi1VUyI+Jm5ic3A7 MS4NCkNyZWF0ZSBhIG5ldyBsb2dpY2FsIG5ldHdvcmsgZnJvbSB0aGUgbmV0d29ya3MgbWFpbiB0 YWI6IGRlZmluZSBpdHM8L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBs YW5nPSJFTi1VUyI+ZGF0YS1jZW50ZXIgYW5kIHNldCBpdHMgdmxhbi1pZCB0byA1MCAodGhlDQpW TSBuZXR3b3JrIGNoZWNrYm94IHNob3VsZCBiZSBjaGVja2VkKTwvc3Bhbj48L3A+DQoNCjxwIGNs YXNzPSJNc29Ob3JtYWwiPjxzcGFuIGxhbmc9IkVOLVVTIj4yLiBDbGljayBvbiB0aGUgY3JlYXRl ZCBuZXR3b3JrIGluIHRoZQ0KbmV0d29ya3MgbWFpbiB0YWIgLS0tJmd0OyBTZWxlY3QgdGhlPC9z cGFuPjwvcD4NCg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gbGFuZz0iRU4tVVMiPiZuYnNw OydDbHVzdGVycycgc3ViLXRhYiBhbmQgLS0tJmd0OyBjbGljayBvbg0KJ0Fzc2lnbi9VbmFzc2ln biBOZXR3b3JrJyBhbmQ8L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBs YW5nPSJFTi1VUyI+Jm5ic3A7YXR0YWNoIHRoZSBuZXR3b3JrIHRvIHRoZSBjbHVzdGVyICh3aGlj aA0KY29udGFpbnMgdGhlIGhvc3RzIHRoYXQgYXJlPC9zcGFuPjwvcD4NCg0KPHAgY2xhc3M9Ik1z b05vcm1hbCI+PHNwYW4gbGFuZz0iRU4tVVMiPiZuYnNwO2V4cGVjdGVkIHRvIHJ1biB0aGUgVk1z KS48L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBsYW5nPSJFTi1VUyI+ Jm5ic3A7My4NCkNsaWNrIG9uICdob3N0cycgc3ViLXRhYiBvZiB0aGUgbmV0d29yayBtYWluIHRh YiBmb3IgdGhlIHNhbWU8L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBs YW5nPSJFTi1VUyI+Jm5ic3A7bmV0d29yay4gWW91IHNob3VsZCBiZSBhYmxlIHRvIHNlZSB0aGUg Y2x1c3RlcidzDQpob3N0cy4gU2VsZWN0IGEgaG9zdDwvc3Bhbj48L3A+DQoNCjxwIGNsYXNzPSJN c29Ob3JtYWwiPjxzcGFuIGxhbmc9IkVOLVVTIj4mbmJzcDthbmQNCmNsaWNrIG9uICdTZXR1cCBO ZXR3b3JrcycuPC9zcGFuPjwvcD4NCg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gbGFuZz0i RU4tVVMiPjQuIEluIHRoZSAnc2V0dXAgbmV0d29ya3MnIGRpYWxvZyB5b3Ugd291bGQNCnNlZSB0 aGUgaG9zdCdzIGludGVyZmFjZXMgb248L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFs Ij48c3BhbiBsYW5nPSJFTi1VUyI+Jm5ic3A7dGhlDQpsZWZ0IHNpZGUgYW5kIHRoZSBsb2dpY2Fs IG5ldHdvcmtzIGRlZmluaXRpb24gb24gdGhlIHJpZ2h0Ljwvc3Bhbj48L3A+DQoNCjxwIGNsYXNz PSJNc29Ob3JtYWwiPjxzcGFuIGxhbmc9IkVOLVVTIj5EcmFnIHRoZSBuZXR3b3JrIG9uIHRvcCBv ZiBhbiBpbnRlcmZhY2UsIG9yDQpmaXJzdCBkcmFnIGEgbmljIG9uIHRvcCBvZjwvc3Bhbj48L3A+ DQoNCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIGxhbmc9IkVOLVVTIj4mbmJzcDthbm90aGVy IHRvIGNyZWF0ZSBhIGJvbmQgYW5kIHRoZW4gZHJhZyB0aGUNCm5ldHdvcmsgdG8gdGhhdCBib25k Ljwvc3Bhbj48L3A+DQoNCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIGxhbmc9IkVOLVVTIj4m bmJzcDtBDQpjb21tYW5kIHdpbGwgYmUgc2VudCBmcm9tIHRoZSBlbmdpbmUgdG8gdGhlIHZkc20g b24gdGhlIGhvc3QgdG88L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBs YW5nPSJFTi1VUyI+Jm5ic3A7Y29uZmlndXJlIHRoZSBkZXNpcmVkIG5ldHdvcmsgY29uZmlndXJh dGlvbi48L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBsYW5nPSJFTi1V UyI+Jm5ic3A7NS4NCkluIG9yZGVyIHRvIHBlcnNpc3QgdGhlIG5ldHdvcmsgY29uZmlndXJhdGlv biBvbiB0aGUgaG9zdCB5b3UgY2FuPC9zcGFuPjwvcD4NCg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+ PHNwYW4gbGFuZz0iRU4tVVMiPiZuYnNwO2NoZWNrIHRoZSAnc2F2ZSBuZXR3b3JrIGNvbmZpZ3Vy YXRpb24nIGZyb20gNC48L3NwYW4+PC9wPg0KDQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBs YW5nPSJFTi1VUyI+Jm5ic3A7PC9zcGFuPjwvcD4NCg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNw YW4gbGFuZz0iRU4tVVMiPkkgZm9sbG93ZWQgdGhlIHN0ZXBzIGFib3ZlIHRvIGNyZWF0ZSB0d28N Cm5ldHdvcmtzLCB2bGFuIHRhZ2dpbmcgbmFtZWVkIDUwIGFuZCA2MC4gTXkgRW5naW5lIGhhcyB0 d28gaG9zdHMsIHRoYXQgaXMsIHR3bw0Kbm9kZXMuIEFuZCBJIGNyZWF0ZWQgc29tZSB2bXMuIFRo ZSB2bXMgd2hpY2ggdXNpbmcgZGlmZmVyZW50IG5ldHdvcmtzIGNhbiBub3QNCmNvbW11bmljYXRl IHdpdGggZWFjaCBvdGhlciwgdGhpcyBpcyByaWdodC4gQnV0IHRoZXJlIGlzIGEgcXVlc3Rpb246 IHRoZSB2bXMNCnVzaW5nIHRoZSBzYW1lIG5ldHdvcmsgYW5kIGluIGRpZmZlcmVudCBob3N0cyBj YW4gbm90IGNvbW11bmljYXRlIHdpdGggZWFjaA0Kb3RoZXIsIGJ1dCB0aGUgdm1zIHVzaW5nIHRo ZSBzYW1lIG5ldHdvcmsgYW5kIGluIHRoZSBzYW1lIGhvc3QgY2FuIGNvbW11bmljYXRlDQp3aXRo IGVhY2ggb3RoZXIuIENvdWxkIHlvdSBwbGVhc2UgZXhwbGFpbiB0aGUgcmVhc29uIGZvciBtZSBh bmQgaGVscCBtZSBzb2x2ZQ0KdGhpcyBwcm9ibGVtPzwvc3Bhbj48L3A+PC9kaXY+ --=-sinamail_alt_0d8e0183c5834bc53f8176aab2891d85--

1 0

Fwd: Re: Cluster settings: "KSM Control" not working?
by Markus Stockhausen 09 Oct '14

09 Oct '14

------=_NextPartTM-000-dc9c40a4-6788-4094-94d0-d1f5578d0222 Content-Type: multipart/alternative; boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD173586616DEEXCHANGEcollogi_" --_000_12EF8D94C6F8734FB2FF37B9FBEDD173586616DEEXCHANGEcollogi_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Rm9yZ290IHRoZSBDQy4NCg0KLS0tLS0tLS0tLSBXZWl0ZXJnZWxlaXRldGUgTmFjaHJpY2h0IC0t LS0tLS0tLS0NClZvbjogTWFya3VzIFN0b2NraGF1c2VuIDxzdG9ja2hhdXNlbkBjb2xsb2dpYS5k ZT4NCkRhdHVtOiAwOS4xMC4yMDE0IDIxOjQyDQpCZXRyZWZmOiBSZTogW292aXJ0LXVzZXJzXSBD bHVzdGVyIHNldHRpbmdzOiAiS1NNIENvbnRyb2wiIG5vdCB3b3JraW5nPw0KQW46IEZyYW5rIFdh bGwgPGZ3QG1vb3YuZGU+DQpDYzoNCg0KDQpIYXZlIGEgbG9vayBhdCByZWRoYXQgYnVnemlsbGEg IzExMTQyMjYuIEl0IHNob3VsZCBnaXZlIGFuIGlkZWEgd2hhdCBpcyBoYXBwZW5pbmcgYmVoaW5k IHRoZSBzY2VuZXMuDQoNClJlZ2FyZGluZyBkaXNhYmxpbmcgdGhlIGZlYXR1cmU6IEkgd291bGQg Z2l2ZSBhIHJlYm9vdCBvZiB0aGUgaHlwZXJ2aXNvciBhIHRyeS4NCg0KTWFya3VzDQoNCkFtIDA5 LjEwLjIwMTQgMjE6MzEgc2NocmllYiBGcmFuayBXYWxsIDxmd0Btb292LmRlPjoNCkhpLA0KDQp3 aGlsZSB0ZXN0aW5nIG9WaXJ0IDMuNSBSQyBJJ3ZlIGNhbWUgYWNyb3NzIHRoaXMgY2x1c3RlciBz ZXR0aW5nOg0KDQpPcHRpbWl6YXRpb24gLT4gS1NNIGNvbnRyb2wgLT4gW1hdIEVuYWJsZSBLU00N Cg0KSSBndWVzcyBpdCdzIHJlbGF0ZWQgdG8gS2VybmVsIFNhbWUtcGFnZSBNZXJnaW5nLg0KU2lu Y2UgS1NNIGlzIGEgYmFkIGlkZWEgaW4gbXkgY2FzZSAocmVhbGx5IHNsb3cgQ1BVcyksIEkndmUg ZGlzYWJsZWQNCnRoaXMgQ2x1c3RlciBzZXR0aW5nLCBleHBlY3Rpbmcgb1ZpcnQgdG8gZGlzYWJs ZSBLU00gb24gZWFjaCBvVmlydCBOb2RlLg0KQnV0IEtTTSBpcyBzdGlsbCBydW5uaW5nIGFuZCBj b25zdW1pbmcgYSBsb3QgQ1BVLg0KDQoxKSBXaGF0IGlzIHRoZSBleHBlY3RlZCByZXN1bHQgZm9y IHRoaXMgc2V0dGluZz8NCjIpIEFuZCBob3cgZG8gSSBjb21wbGV0ZWx5IGFuZCBwZXJtYW5lbnRl bHkgZGlzYWJsZSBLU00gb24gb1ZpcnQgTm9kZXM/DQoNCg0KUmVnYXJkcw0KLSBGcmFuaw0KX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18NClVzZXJzIG1haWxp bmcgbGlzdA0KVXNlcnNAb3ZpcnQub3JnDQpodHRwOi8vbGlzdHMub3ZpcnQub3JnL21haWxtYW4v bGlzdGluZm8vdXNlcnMNCg== --_000_12EF8D94C6F8734FB2FF37B9FBEDD173586616DEEXCHANGEcollogi_ Content-Type: text/html; charset="utf-8" Content-ID: <77542A5F234A05428415F532020922EE(a)collogia.de> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5Pg0KPHAgZGlyPSJsdHIi PkZvcmdvdCB0aGUgQ0MuPC9wPg0KPGRpdiBjbGFzcz0icXVvdGUiPi0tLS0tLS0tLS0gV2VpdGVy Z2VsZWl0ZXRlIE5hY2hyaWNodCAtLS0tLS0tLS0tPGJyPg0KVm9uOiBNYXJrdXMgU3RvY2toYXVz ZW4gJmx0O3N0b2NraGF1c2VuQGNvbGxvZ2lhLmRlJmd0Ozxicj4NCkRhdHVtOiAwOS4xMC4yMDE0 IDIxOjQyPGJyPg0KQmV0cmVmZjogUmU6IFtvdmlydC11c2Vyc10gQ2x1c3RlciBzZXR0aW5nczog JnF1b3Q7S1NNIENvbnRyb2wmcXVvdDsgbm90IHdvcmtpbmc/PGJyPg0KQW46IEZyYW5rIFdhbGwg Jmx0O2Z3QG1vb3YuZGUmZ3Q7PGJyPg0KQ2M6IDxicj4NCjxiciB0eXBlPSJhdHRyaWJ1dGlvbiI+ DQo8YmxvY2txdW90ZSBjbGFzcz0icXVvdGUiIHN0eWxlPSJtYXJnaW46MCAwIDAgLjhleDtib3Jk ZXItbGVmdDoxcHggI2NjYyBzb2xpZDtwYWRkaW5nLWxlZnQ6MWV4Ij4NCjxzdHlsZT4NCjwhLS0N Ci5FbWFpbFF1b3RlDQoJe21hcmdpbi1sZWZ0OjFwdDsNCglwYWRkaW5nLWxlZnQ6NHB0Ow0KCWJv cmRlci1sZWZ0OiM4MDAwMDAgMnB4IHNvbGlkfQ0KLS0+DQo8L3N0eWxlPg0KPGRpdj4NCjxwIGRp cj0ibHRyIj5IYXZlIGEgbG9vayBhdCByZWRoYXQgYnVnemlsbGEgIzExMTQyMjYuIEl0IHNob3Vs ZCBnaXZlIGFuIGlkZWEgd2hhdCBpcyBoYXBwZW5pbmcgYmVoaW5kIHRoZSBzY2VuZXMuPC9wPg0K PHAgZGlyPSJsdHIiPlJlZ2FyZGluZyBkaXNhYmxpbmcgdGhlIGZlYXR1cmU6IEkgd291bGQgZ2l2 ZSBhIHJlYm9vdCBvZiB0aGUgaHlwZXJ2aXNvciBhIHRyeS48L3A+DQo8cCBkaXI9Imx0ciI+TWFy a3VzPC9wPg0KPGRpdiBjbGFzcz0ieF9xdW90ZSI+QW0gMDkuMTAuMjAxNCAyMTozMSBzY2hyaWVi IEZyYW5rIFdhbGwgJmx0O2Z3QG1vb3YuZGUmZ3Q7OjxiciB0eXBlPSJhdHRyaWJ1dGlvbiI+DQo8 L2Rpdj4NCjwvZGl2Pg0KPGZvbnQgc2l6ZT0iMiI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMHB0 Ij4NCjxkaXYgY2xhc3M9IlBsYWluVGV4dCI+SGksPGJyPg0KPGJyPg0Kd2hpbGUgdGVzdGluZyBv VmlydCAzLjUgUkMgSSd2ZSBjYW1lIGFjcm9zcyB0aGlzIGNsdXN0ZXIgc2V0dGluZzo8YnI+DQo8 YnI+DQpPcHRpbWl6YXRpb24gLSZndDsgS1NNIGNvbnRyb2wgLSZndDsgW1hdIEVuYWJsZSBLU008 YnI+DQo8YnI+DQpJIGd1ZXNzIGl0J3MgcmVsYXRlZCB0byBLZXJuZWwgU2FtZS1wYWdlIE1lcmdp bmcuPGJyPg0KU2luY2UgS1NNIGlzIGEgYmFkIGlkZWEgaW4gbXkgY2FzZSAocmVhbGx5IHNsb3cg Q1BVcyksIEkndmUgZGlzYWJsZWQgPGJyPg0KdGhpcyBDbHVzdGVyIHNldHRpbmcsIGV4cGVjdGlu ZyBvVmlydCB0byBkaXNhYmxlIEtTTSBvbiBlYWNoIG9WaXJ0IE5vZGUuPGJyPg0KQnV0IEtTTSBp cyBzdGlsbCBydW5uaW5nIGFuZCBjb25zdW1pbmcgYSBsb3QgQ1BVLjxicj4NCjxicj4NCjEpIFdo YXQgaXMgdGhlIGV4cGVjdGVkIHJlc3VsdCBmb3IgdGhpcyBzZXR0aW5nPzxicj4NCjIpIEFuZCBo b3cgZG8gSSBjb21wbGV0ZWx5IGFuZCBwZXJtYW5lbnRlbHkgZGlzYWJsZSBLU00gb24gb1ZpcnQg Tm9kZXM/PGJyPg0KPGJyPg0KPGJyPg0KUmVnYXJkczxicj4NCi0gRnJhbms8YnI+DQpfX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fXzxicj4NClVzZXJzIG1haWxp bmcgbGlzdDxicj4NClVzZXJzQG92aXJ0Lm9yZzxicj4NCjxhIGhyZWY9Imh0dHA6Ly9saXN0cy5v dmlydC5vcmcvbWFpbG1hbi9saXN0aW5mby91c2VycyIgdGFyZ2V0PSJfQkxBTksiPmh0dHA6Ly9s aXN0cy5vdmlydC5vcmcvbWFpbG1hbi9saXN0aW5mby91c2VyczwvYT48YnI+DQo8L2Rpdj4NCjwv c3Bhbj48L2ZvbnQ+PC9ibG9ja3F1b3RlPg0KPC9kaXY+DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_12EF8D94C6F8734FB2FF37B9FBEDD173586616DEEXCHANGEcollogi_-- ------=_NextPartTM-000-dc9c40a4-6788-4094-94d0-d1f5578d0222 Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-dc9c40a4-6788-4094-94d0-d1f5578d0222--

2 1

Re: [ovirt-users] About the oVirt workshop on Oct 16 at LinuxCon
by Oved Ourfali 09 Oct '14

09 Oct '14

On Oct 9, 2014 7:09 PM, Daniel Helgenberger <daniel.helgenberger(a)m-box.de> wrote: > > > On 08.10.2014 20:27, Oved Ourfali wrote: > > On Oct 8, 2014 7:52 PM, Patrick Laimbock <patrick(a)laimbock.com> wrote: > >> Hi, > >> > >> About the oVirt workshop at LinuxCon on Oct 16: is it a hands-on > >> workshop where you do an install/config on your own laptop (if yes, > >> requirements?) or is it more of a presentation kind of workshop? > >> > > Most of the sessions are presentation kind, talking about ovirt in general, 3.5 features, future plans, different kinds of integration we did (glance, neutron, foreman). One of the sessions (iirc it is quite a long one), is a workshop like, where you play with an all-in-one instance of ovirt using a supplied DOK, where you can setup an environment easily and fast, and play with ovirt a bit. > So we probably do not need our own hardware? (I will bring my notebook > anyway ;) > Have already planned who of the dev team will be attending? We will have about 10 dev people, or even a bit more, including myself :-) hardware is indeed required. We'll supply the software... > > Cheers! > > > > Hope this information is helpful, > > Oved > > > >> Thanks, > >> Patrick > >> _______________________________________________ > >> Users mailing list > >> Users(a)ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > -- > Daniel Helgenberger > m box bewegtbild GmbH > > P: +49/30/2408781-22 > F: +49/30/2408781-10 > > ACKERSTR. 19 > D-10115 BERLIN > > www.m-box.de www.monkeymen.tv > > Geschäftsführer: Martin Retschitzegger / Michaela Göllner > Handeslregister: Amtsgericht Charlottenburg / HRB 112767

1 0

Re: [ovirt-users] About the oVirt workshop on Oct 16 at LinuxCon
by Oved Ourfali 09 Oct '14

09 Oct '14

On Oct 8, 2014 7:52 PM, Patrick Laimbock <patrick(a)laimbock.com> wrote: > > Hi, > > About the oVirt workshop at LinuxCon on Oct 16: is it a hands-on > workshop where you do an install/config on your own laptop (if yes, > requirements?) or is it more of a presentation kind of workshop? > Most of the sessions are presentation kind, talking about ovirt in general, 3.5 features, future plans, different kinds of integration we did (glance, neutron, foreman). One of the sessions (iirc it is quite a long one), is a workshop like, where you play with an all-in-one instance of ovirt using a supplied DOK, where you can setup an environment easily and fast, and play with ovirt a bit. Hope this information is helpful, Oved > Thanks, > Patrick > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users

2 1

Running a Gluster volume off of a seperate network interface and managing it via the oVirt engine Web-GUI
by Keppler, Thomas (PEBA) 09 Oct '14

09 Oct '14

--_000_196AB7D9F4C2F943BFC199940DF21D790159FC1770ACKITMSX07kit_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hDQoNCkkgaGF2ZSBhIHJhdGhlciBxdWljayBxdWVzdGlvbiBvbiBiZWhhbGYgb2YgR2x1 c3RlckZTLiBNeSBOb2RlcyBhcmUgc2V0IHVwIHNvIHRoYXQgdGhleSBoYXZlIHR3byBOSUNzLCBm b3VyIHBvcnRzLiBUaGUgTklDIHRoYXQgaXMgYWRkaXRpb25hbGx5IGluc3RhbGxlZCB0byB0aGUg aW50ZXJuYWwgbW90aGVyYm9hcmQncyBOSUMgaXMgYSAxMEdicHMgb25lIHRoYXQgSSB3YW50IHRv IHVzZSBmb3IgR2x1c3Rlci1Db21tdW5pY2F0aW9uIGluIHRoZSBHbHVzdGVyQ2x1c3Rlci4NCg0K Tm93LCBJIGNvdWxkIGp1c3QgY3JlYXRlIGEgcGxhaW4gb2xkIEdsdXN0ZXIgVm9sdW1lIGFuZCBy dW4gZXZlcnl0aGluZyBvZmYgb2YgdGhlIHRlcm1pbmFsIGFuZCBiZSBnb29kIHdpdGggaXQgYnV0 IHRoYXQncyByZWFsbHkgbm90IHdoYXQgSSB3YW50IHRvIGRvISBJIHdhbnQgdG8gbWFuYWdlIGFz IG11Y2ggYXMgcG9zc2libGUgdGhyb3VnaCB0aGUgb1ZpcnQgZW5naW5lIGFuZCBJIHNhdyBpdCdz IHBvc3NpYmxlIHRvIG1hbmFnZSBHbHVzdGVyIFZvbHVtZXMsIHRvby4NCklmIEkgdHJ5IHRvIGNy ZWF0ZSBvbmUgdGhlcmUgdGhvdWdoLCBJIGNhbiBvbmx5IHNlZSB0aGUgSVAgYWRkcmVzc2VzIEkg dXNlZCB0byBjb21tdW5pY2F0ZSB3aXRoIG9WaXJ0IChvbiB0aGUgaW50ZXJuYWwgMUdicHMgTklD KS4NCg0KSSBoYXZlIHRyaWVkIGNyZWF0aW5nIGFub3RoZXIgbmV0d29yayBhbmQgYm91bmQgYWxs IG15IG5vZGVzIHRvIGl0IC0gc3RpbGwgbm8gc3VjY2Vzcy4NCg0KQW55IGlkZWFzIGhvdyBJIGNh biBkbyB0aGlzPw0KDQotLQ0KQmVzdCByZWdhcmRzDQpUaG9tYXMgS2VwcGxlcg0K --_000_196AB7D9F4C2F943BFC199940DF21D790159FC1770ACKITMSX07kit_ Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 PCFET0NUWVBFIEhUTUwgUFVCTElDICItLy9XM0MvL0RURCBIVE1MIDQuMCBUUkFOU0lUSU9OQUwv L0VOIj4KPEhUTUw+CjxIRUFEPgogIDxNRVRBIEhUVFAtRVFVSVY9IkNvbnRlbnQtVHlwZSIgQ09O VEVOVD0idGV4dC9odG1sOyBDSEFSU0VUPVVURi04Ij4KICA8TUVUQSBOQU1FPSJHRU5FUkFUT1Ii IENPTlRFTlQ9Ikd0a0hUTUwvNC42LjYiPgo8L0hFQUQ+CjxCT0RZPgpIZWxsbyE8QlI+CjxCUj4K SSBoYXZlIGEgcmF0aGVyIHF1aWNrIHF1ZXN0aW9uIG9uIGJlaGFsZiBvZiBHbHVzdGVyRlMuIE15 IE5vZGVzIGFyZSBzZXQgdXAgc28gdGhhdCB0aGV5IGhhdmUgdHdvIE5JQ3MsIGZvdXIgcG9ydHMu IFRoZSBOSUMgdGhhdCBpcyBhZGRpdGlvbmFsbHkgaW5zdGFsbGVkIHRvIHRoZSBpbnRlcm5hbCBt b3RoZXJib2FyZCdzIE5JQyBpcyBhIDEwR2JwcyBvbmUgdGhhdCBJIHdhbnQgdG8gdXNlIGZvciBH bHVzdGVyLUNvbW11bmljYXRpb24gaW4gdGhlIEdsdXN0ZXJDbHVzdGVyLjxCUj4KPEJSPgpOb3cs IEkgY291bGQganVzdCBjcmVhdGUgYSBwbGFpbiBvbGQgR2x1c3RlciBWb2x1bWUgYW5kIHJ1biBl dmVyeXRoaW5nIG9mZiBvZiB0aGUgdGVybWluYWwgYW5kIGJlIGdvb2Qgd2l0aCBpdCBidXQgdGhh dCdzIHJlYWxseSBub3Qgd2hhdCBJIHdhbnQgdG8gZG8hIEkgd2FudCB0byBtYW5hZ2UgYXMgbXVj aCBhcyBwb3NzaWJsZSB0aHJvdWdoIHRoZSBvVmlydCBlbmdpbmUgYW5kIEkgc2F3IGl0J3MgcG9z c2libGUgdG8gbWFuYWdlIEdsdXN0ZXIgVm9sdW1lcywgdG9vLjxCUj4KSWYgSSB0cnkgdG8gY3Jl YXRlIG9uZSB0aGVyZSB0aG91Z2gsIEkgY2FuIG9ubHkgc2VlIHRoZSBJUCBhZGRyZXNzZXMgSSB1 c2VkIHRvIGNvbW11bmljYXRlIHdpdGggb1ZpcnQgKG9uIHRoZSBpbnRlcm5hbCAxR2JwcyBOSUMp LjxCUj4KPEJSPgpJIGhhdmUgdHJpZWQgY3JlYXRpbmcgYW5vdGhlciBuZXR3b3JrIGFuZCBib3Vu ZCBhbGwgbXkgbm9kZXMgdG8gaXQgLSBzdGlsbCBubyBzdWNjZXNzLjxCUj4KPEJSPgpBbnkgaWRl YXMgaG93IEkgY2FuIGRvIHRoaXM/PEJSPgo8QlI+Ci0tPEJSPgpCZXN0IHJlZ2FyZHM8QlI+ClRo b21hcyBLZXBwbGVyCjwvQk9EWT4KPC9IVE1MPgoA --_000_196AB7D9F4C2F943BFC199940DF21D790159FC1770ACKITMSX07kit_--

2 1

[ANN] oVirt 3.5.0 Fifth Release Candidate is now available for testing
by Sandro Bonazzola 09 Oct '14

09 Oct '14

The oVirt team is pleased to announce that the 3.5.0 Fifth Release Candidate is now available for testing as of Oct 9th 2014. The release candidate is available now for Fedora 19, Fedora 20 and Red Hat Enterprise Linux 6.5 (or similar) and allow you to use Red Hat Enterprise Linux 7 as node and run Hosted Engine. This release of oVirt includes numerous bug fixes. See the release notes [1] for a list of the new features and bugs fixed. The existing repository ovirt-3.5-pre has been updated for delivering this release without the need of enabling any other repository. If you're already using oVirt 3.5 repository, please update ovirt-release35 rpm. Please refer to release notes [1] for Installation / Upgrade instructions. New oVirt Live, oVirt Guest Tools and oVirt Node ISO will be available soon as well[2]. Please note that mirrors may need usually one day before being synchronized. If you want to be sure to use latest rpms and don't want to wait for the mirrors, you can edit /etc/yum.repos.d/ovirt-3.5.repo commenting the mirror line and removing the comment on baseurl line. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.5_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Ubuntu and Debian Guest Agent Not Working Properly
by Punit Dambiwal 09 Oct '14

09 Oct '14

Hi All, I have installed new guest agent in the Ubuntu 14.04 and Debian 7.6....it's working fine except shutdown and reboot....even i click on the reboot button but it doesn't affect any thing on the VM (i.e the logs on the dashboard says VM rebooted successfully but actually it's rebooted...remain in the same stage...) I am using Ovirt 3.4.3 and the following Ubuntu and Debian guest agent.... http://www.ovirt.org/Feature/GuestAgentUbuntu http://www.ovirt.org/Feature/GuestAgentDebian Both the Url said that The guest agent also provides the following actions :- - Shutdown/Reboot from within the Guest OS Thanks, Punit

3 8

Messed up UI and missing CSS
by Dima Kuznetsov 09 Oct '14

09 Oct '14

Hello, I am using rpms from the ovirt-3.5 repositories on ovirt.org, to install and deploy ovirt-engine, and the UI I get in Firefox (f19) looks like the attached screenshot. I'm installing engine rpms on CentOS 6.5, and have patternfly1 rpm installed there as well. When using web inspector, the browser tries to retrieve style.min.css but gets a 404. Is there anything that I am missing? -- Dima Kuznetsov

5 11

[QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
by Sandro Bonazzola 09 Oct '14

09 Oct '14

Hi, We are going to start composing oVirt 3.5.0 RC5 today 2014-10-09 as soon as the ovirt-engine package finish to build. The bug tracker [1] shows no blockers: The bugs keyworded as Regression have been reviewed by maintainers and not marked as blockers[4] Features completed are marked in green on Features Status Table [2] There are still 34 bugs [3] targeted to 3.5.0 which will be moved automatically to 3.5.1 once the build will be released. Maintainers / Assignee: If you're aware of something that should block the release, please raise it as soon as possible. [1] http://bugzilla.redhat.com/1073943 [2] http://goo.gl/4SuYdE [3] http://red.ht/1pVEk7H [4] http://goo.gl/uavikG Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 1

Re: [ovirt-users] Custom Cloud-Init script only partially executing
by Chris Routh (Routhinator) 09 Oct '14

09 Oct '14

Anyone have any idea why this is behaving like this? On Oct 8, 2014 9:35 AM, Chris Routh <routh(a)amateurwriting.net> wrote: > > I'm trying to get the custom cloud-init script section in my site to > run. My goal is to have the VM run 'yum update', add the PuppetLabs > repository, and then install the latest puppet agent, and join it to > Puppet. > > Following the docs for oVirt and Cloud-Init I have this: > > BEGIN SCRIPT > ======================= > yum_repos: > # The name of the repository > puppetlabs-release: > baseurl: > http://yum.puppetlabs.com/puppetlabs-release-el-6.noarch.rpm > enabled: true > failovermethod: priority > gpgcheck: true > gpgkey: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-puppetlabs > name: Puppet Labs repository for Enterprise Linux 6 > > > # Upgrade the instance on first boot > package_upgrade: true > > > # Install additional packages on first boot > packages: > - puppet > > # Automatically setup and run puppetd > puppet: > conf: > agent: > server: "puppet.example.com" > certname: "%f" > ca_cert: | > -----BEGIN CERTIFICATE----- > < My Cert > > -----END CERTIFICATE----- > > > ======================= > END SCRIPT > > However what I end up with from this is: > > - No Yum update > - No added repository > - Puppet gets installed from the default repos > - No attempt to join > > > According to the cloud-init docs my code is correct, however oVirt is > not respecting anything, with the sole exception being the 'packages:' > argument. Can someone please explain? > > Also, I have combed the script and ensured that the indentation was 4 > spaces, and not tabs. I noted that previous users in this mailing list > have had that issue before. > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users

1 0