- Users - oVirt List Archives

OVIRT-3.5-TEST-DAY-3: replace XML-rpc with JSON-rpc
by Francesco Romani 17 Sep '14

17 Sep '14

Hi everyone of this test day I played with the new JSON-rpc transport, which is enabled by default. I set up from scratch two hypervisors running on RHEL 6.5, while Engine was running on F19. I created everything from scratch and tested all the flows I known good enough, including less-then-common stuff. The list includes creating storage domains, VMs, hotplug/unplug disks, snapshots, migration, hibernation and dehibernation. On top of that, I prepared an environment to run more tests, that included create 200 VMs, started/stopped 100 of them to test. I kept an eye on the logs other than Engine. Everything I tried went OK, and logs look good to me. I run in a few hiccups, which I mention for the sake of completeness: - VDSM refused to start or run VMs initially: libvirt config included relics from past environment on the same box, not JSON-rpc fault. Fixed with new config and (later) a reboot. - Trying recovery, Engine took longer than expected to sync up with VDSM. I have not hard data and feeling is not enough to file a BZ, so I didn't. - Still trying recovery, one and just one time Engine had stale data from VDSM (reported two VMs as present which actually aren't). Not sure it was related to JSON-rpc, can't reproduce, so not filed a BZ. Since I need to continue profiling anyway (better late than never I guess), I include a couple of test to see if JSON-rpc makes any difference to JSON-rpc. Results will be posted on devel(a)ovirt.org and/or on the oVirt wiki. -- Francesco Romani RedHat Engineering Virtualization R & D Phone: 8261328 IRC: fromani

1 0

[QE][ACTION REQUIRED] oVirt 3.5.0 status
by Sandro Bonazzola 17 Sep '14

17 Sep '14

Hi, We are going to start composing oVirt 3.5.0 GA (or RC3, depending on Test Day results and oVirt Sync Meeting decisions) on Monday 2014-09-22. Maintainers: - Please be sure that 3.5 snapshot satisfy release criteria[9] - Please be sure that no pending patches are going to block the release - If any patch must block the GA release please raise the issue as soon as possible. - If any packages need a rebase please raise the issue as soon as possible. - Be aware that packages that doesn't need a rebase must be re-built with final release versioning from the RC2 tag. The bug tracker [1] shows the following proposed blockers to be reviewed: Bug ID Whiteboard Status Summary 1142256 integration POST engine-setup does not write conf file to allow accessing reports And the following dependencies still open: Bug 1041569 - [NFR] libvirt: Returning the watermark for all the images opened for writing Bug 1102881 - virDomainBlockCommit fails with live snapshots on oVirt block storage The following bugs are keyworded as Regression and not marked as blockers[10] Bug ID Whiteboard Status Summary 1135909 infra POST [Event log] Wrong warning about available swap memory of host [1023MB], when actually host has [1024MB] memory size 1118349 storage NEW [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError 1110444 ux POST bookmark selection does not work on first try 1138314 virt NEW Fail to start vm with payload. Feature freeze is now effective, and branch has been created. All new patches must be backported to 3.5 branch too. Features completed are marked in green on Features Status Table [2] There are still 83 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 58 bugs [4] targeted to 3.5.0. More in detail [5]: Whiteboard NEW ASSIGNED POST Total docs 14 1 0 15 gluster 9 4 2 15 i18n 0 0 1 1 integration 1 1 1 3 node 6 4 0 10 ppc 2 0 4 6 sla 5 0 8 13 storage 0 0 3 3 virt 12 0 5 17 Total 49 10 24 83 Maintainers / Assignee: - Please ensure that completed features are marked in green on Features Status Table [2] - If you find a blocker bug please remember to add it to the tracker [1] - Please fill release notes, the page has been created here [6] - Please review results from Third Test Day [7] - Please update the target to 3.5.1 or later for bugs that won't be in 3.5.0: it will ease gathering the blocking bugs for next releases. Community: - You're welcome to join us testing next release candidate and getting involved in oVirt Quality Assurance[8] [1] http://bugzilla.redhat.com/1073943 [2] http://goo.gl/4SuYdE [3] http://red.ht/1pVEk7H [4] http://red.ht/1zT2mSq [5] http://red.ht/1q7SqNL [6] http://www.ovirt.org/OVirt_3.5_Release_Notes [7] http://etherpad.ovirt.org/p/3.5-testday-3 [8] http://www.ovirt.org/OVirt_Quality_Assurance [9] http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria_.28WIP.29 [10] http://goo.gl/uavikG Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

5 7

[OVIRT-3.5-TEST-DAY-3] dwh and reports on separate host
by Martin Sivak 17 Sep '14

17 Sep '14

Hi, I installed fresh engine on CentOS 6.5 (inside a VM) and dwh + reports to other CentOS 6.5 VM. Except being a bit confused by the certificate signing step during the setup all went well and I can see that the dwh service is running and I can access the reports site. I started in the afternoon, because I had to reinstall my hosts first, so I might try poking around tomorrow as well. Also I do not have extra hosts atm, but I hope to have my nested virtualization environment back tomorrow to actually put some data to the reports. -- Martin Sivák msivak(a)redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ

1 0

Virtual Machines reporting as paused
by Thomas Scofield 17 Sep '14

17 Sep '14

A large number of my virtual machines are reporting in a paused state but they are actually up and running. Unfortunately I don't look at this cluster very often so I don't know exactly when it got into this state, I believe it may have happened a couple months back when I deployed a change to /etc/vdsm/vdsm.conf to throttle virtual machines migrations. I deployed this change via puppet and had puppet cycle the vdsm daemon. All of the vdsm daemons in the cluster were restarted in a short period of time. Since this happened some time back all the logs have rotated off. I have tried restarting vdsmd and libvirtd, but that doesn't appear to return the virtual machines to an up state. The output of "vdsClient -s 0 getAllVmStats" reports them as paused, "virsh -r list --all" reports them as running. From the GUI I can click run and the VM will show “Up” in the GUI and vdsClient. But if I restart vdsm, the VM's revert back to displaying a paused state. I did find that the *.recovery files in /var/run/vdsm contain a status of Paused even when the GUI and vdsClient are reporting it as up. I did try and change the status in this file while vdsm was down and then start vdsm, but it had no effect and the entry in the *.recovery file which reverted to paused. p335 sasS'status' p336 S'Paused' Any idea what might have caused the VM's to report as paused and how to recover from it? I am running ovirt-3.3.4-1 and vdsm-4.13.3-4

2 2

utostarting VMs after restart
by Grzegorz Szypa 17 Sep '14

17 Sep '14

Hi, where are located the scripts starting VMs in the environment oVirt? I would like to add skrytpt taking off virtual machines to the list of competing services during system startup. Is it possible to do such a thing? So that the effect was evident starting in webmin-portal. -- G.Sz.

3 5

[QE][ACTION NEEDED] oVirt 3.4.4 status
by Sandro Bonazzola 17 Sep '14

17 Sep '14

Hi, We're going to start composing oVirt 3.4.4 GA on *2014-09-23 08:00 UTC* from 3.4 branch. Maintainers: - Please be sure that 3.4 snapshot allow to create VMs before *2014-09-22 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-09-22 15:00 UTC* - If any patch must block the GA release please raise the issue as soon as possible. A bug tracker [1] has been opened and shows no open blockers. There are still 6 bugs [2] targeted to 3.4.4. Excluding node and documentation bugs we still have 3 bugs [3] targeted to 3.4.4. Bug ID Whiteboard Status Summary 988341 node NEW Should not create bond when report an error in configuration process 1097735 node NEW "Reboot" button failed to work in progress_page with serial console to install ovirt-node iso. 1023481 node ASSIGNED Sane and working default libvirt config 1059309 sla NEW [events] 'Available memory of host $host (...) under defined threshold...' is logged only once 1127460 storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage 1135061 storage POST Require qemu-kvm-rhev on EL to support live snapshots Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.4.4 should not be released without them fixed. - Please update the target to 3.5.1 or later for bugs that won't be in 3.4.4: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.4 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1118689 [2] http://red.ht/1qwhPXB [3] http://red.ht/1r8jnap [4] http://www.ovirt.org/OVirt_3.4.4_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.4.4_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

VM Network Interfaces - bad cluster network and VLAN assignment
by J. Mikulec 17 Sep '14

17 Sep '14

Hello, I have 4 Cluster networks and I am trying to add 2 NICs to VM now: nic0 -> br0 nic1 -> br1 At ovirt-engine it seems ok, but assignment in qemu is incorrect - going to this: nic0 -> br1 nic1 -> br0 So nics belongs to incorrect bridges and so incorrect VLANs. It does oVirt totally unusable for me (we strictly use 0 network for public IPs and 1 for intranet use) :( With one NIC I not see this problem. http://tinypic.com/view.php?pic=29pzxbr&s=8#.VBjLUxYoEiw http://tinypic.com/view.php?pic=2hdd07m&s=8#.VBjLgRYoEiw Thank for help. J.

2 2

Cannot create disk image on storage domain NOT master
by Gabi C 17 Sep '14

17 Sep '14

Hello! - 1 oVirt Engine (not hosted), 4 nodes, 3 in "Default" datacenter, 1 in a local-storage type datacenter; - Recently upgraded from 3.4.2 to 3.4.3; "Default"Datacenter has, along "mandatory"ISO and Export domain, two storage domains "storage_gluster2" aprox 550Gb and "storage_gluster3" aprox 130 GB. As you can guess :-), the three nodes serve also as gluster bricks, each with 2 bricks in the above mentioned storage domains, both in replicated mode. Master domain is "storage_gluster3". After create new VM, trying to add new disk on "storage_gluster2 ", which is NOT master domain raise (ovirt-engine.log) -- Message: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = [Errno 2] No such file or directory: '/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/b694642b-4603-4dc6-ba36-c0d82ca83fa2/images/5de04fd7-a8a5-483a-be53-cffb17db3d94', code = 100, -- Exception: VDSGenericException: VDSErrorException: Failed to HSMGetAllTasksStatusesVDS, error = [Errno 2] No such file or directory: '/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/b694642b-4603-4dc6-ba36-c0d82ca83fa2/images/5de04fd7-a8a5-483a-be53-cffb17db3d94', code = 100 On SPM: vdsClient -s 0 getConnectedStoragePoolsList 5849b030-626e-47cb-ad90-3ce782d831b3 vdsClient -s 0 getStoragePoolInfo 5849b030-626e-47cb-ad90-3ce782d831b3 name = Default isoprefix = /rhev/data-center/mnt/10.125.1.193: _mnt_storage__filer1_export__nfs2_iso/bb09aac2-05d5-45c5-b573-ebff9292ad6d/images/11111111-1111-1111-1111-111111111111 pool_status = connected lver = 23 spm_id = 1 master_uuid = aa401118-fc30-4399-8f01-f1751f89fff4 version = 3 domains = b694642b-4603-4dc6-ba36-c0d82ca83fa2:Active,bb09aac2-05d5-45c5-b573-ebff9292ad6d:Active,aa401118-fc30-4399-8f01-f1751f89fff4:Active,62f795ed-486c-443d-93e9-2c16595fe546:Active type = GLUSTERFS master_ver = 1136 b694642b-4603-4dc6-ba36-c0d82ca83fa2 = {'status': 'Active', 'diskfree': '324000022528', 'isoprefix': '', 'alerts': [], 'disktotal': '590231371776', 'version': 3} bb09aac2-05d5-45c5-b573-ebff9292ad6d = {'status': 'Active', 'diskfree': '1904214016', 'isoprefix': '/rhev/data-center/mnt/10.125.1.193:_mnt_storage__filer1_export__nfs2_iso/bb09aac2-05d5-45c5-b573-ebff9292ad6d/images/11111111-1111-1111-1111-111111111111', 'alerts': [], 'disktotal': '8049917952', 'version': 0} aa401118-fc30-4399-8f01-f1751f89fff4 = {'status': 'Active', 'diskfree': '111680159744', 'isoprefix': '', 'alerts': [], 'disktotal': '144146563072', 'version': 3} 62f795ed-486c-443d-93e9-2c16595fe546 = {'status': 'Active', 'diskfree': '131499819008', 'isoprefix': '', 'alerts': [], 'disktotal': '234763583488', 'version': 0} mount ..... 127.0.0.1:gluster_data3 on /rhev/data-center/mnt/glusterSD/127.0.0.1:gluster__data3 type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) 127.0.0.1:gluster_data2 on /rhev/data-center/mnt/glusterSD/127.0.0.1:gluster__data2 type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) ........ ls -la /rhev/data-center/mnt/ total 20 drwxr-xr-x. 5 vdsm kvm 4096 Sep 2 16:46 . drwxr-xr-x. 5 vdsm kvm 4096 Sep 2 16:46 .. drwxrwsrwx+ 3 96 96 4096 Feb 7 2014 10.125.1.193: _mnt_storage__filer1_export__nfs1_export drwxrwsrwx+ 3 96 96 4096 May 8 17:16 10.125.1.193: _mnt_storage__filer1_export__nfs2_iso drwxr-xr-x. 5 vdsm kvm 4096 Sep 2 16:45 glusterSD but no: '/rhev/data-center/5849b030-626e-47cb-ad90-3ce782d831b3/b694642b-4603-4dc6-ba36-c0d82ca83fa2/images/5de04fd7-a8a5-483a-be53-cffb17db3d94', as per error from engine log posted above. Do you have any opinions/ideeas/advice? I''ll try to restart the whole thing ( engine plus 3 nodes) but , since it is in production it is a "'little bit" dificult :-)

1 1

Spice client with engine portal
by Maurice James 17 Sep '14

17 Sep '14

------=_Part_5022_39979720.1410875418148 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit How do I get the spice client to connect to a VM through the portal instead of attempting to connect directly to the VM? For example. I allow access to the engine portal over our WAN to a NATed IP address. The users on the other side of the WAN do not have access to the real VM IP addresses. When they click on the console access button, they are unable to connect to the VM. I believe this is because it using attempting a direct connection instead of proxying through the portal. ------=_Part_5022_39979720.1410875418148 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><body><div style="font-family: times new roman, new york, times, serif; font-size: 12pt; color: #000000"><div>How do I get the spice client to connect to a VM through the portal instead of attempting to connect directly to the VM? For example. I allow access to the engine portal over our WAN to a NATed IP address. The users on the other side of the WAN do not have access to the real VM IP addresses. When they click on the console access button, they are unable to connect to the VM. I believe this is because it using attempting a direct connection instead of proxying through the portal. </div></div></body></html> ------=_Part_5022_39979720.1410875418148--

3 4

oVirt Engine Virtual Appliance for 3.5 is ready for testing
by Fabian Deutsch 17 Sep '14

17 Sep '14

Hello! The ready-to-use Engine appliance is now building again and should contain the the latest and greatest 3.5rc2 packages. That appliance can be used for testing hosted engine, as well as testing oVirt Engine 3.5 in general. The ova (intended to be used with hosted engine setup) and the qcow2 (intended to be used for testing) images can be found here: http://jenkins.ovirt.org/view/All/job/ovirt-appliance_master_merged/ All relevant packages are pre-installed, but the appliance still needs to be configured. To configure the appliance you need to run: $ engine-setup --offline --config-append=ovirt-engine-answers inside the appliance after downloading it. Please let us know if you have any issues. Greetings fabian

2 2

Passing custom script to cloud init using api
by Shanil S 17 Sep '14

17 Sep '14

Hi All, >From the ovirt admin panel, there is an option to give the custom script in the cloud init ( Run Once-> cloud init- > Custom script ). Is there any ways to pass the custom script to cloud init using the rest api ? -- Regards Shanil

3 23

Installing 3.4.3 Centos 6.5
by Grzegorz Szypa 17 Sep '14

17 Sep '14

Hi. When I install ovirt 3.4.3 on centos 6.5 final I used this repo: http://www.rackspace.com/knowledge_center/article/installing-rhel-epel-repo… and installed in such a way ovirt-engine: yum -y upgrade yum localinstall http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm <http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm> yum -y upgrade yum -y install ovirt-engine* and i work Message: 5 Date: Mon, 15 Sep 2014 10:30:53 +0200 From: Neil <nwilson123(a)gmail.com> To: Yedidyah Bar David <didi(a)redhat.com> Cc: "users(a)ovirt.org" <users(a)ovirt.org> Subject: Re: [ovirt-users] Installing 3.4.3 Centos 6.5 Message-ID: <CAPdW-3+OfMeA4N3q0YZNS+OAOTaT-ZSeAgULu7o=auTUoJT-3Q(a)mail.gmail.com> Content-Type: text/plain; charset=UTF-8 Hi David, Wow you're correct, I see that somehow it isn't installed. To install it I just did the usual... yum localinstall http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm yum install ovirt-engine engine-setup Not sure if I've perhaps missed a step? Thanks. Regards. Neil Wilson. On Mon, Sep 15, 2014 at 9:35 AM, Yedidyah Bar David <didi(a)redhat.com> wrote: > ----- Original Message ----- >> From: "Neil" <nwilson123(a)gmail.com> >> To: users(a)ovirt.org >> Sent: Monday, September 15, 2014 10:17:45 AM >> Subject: [ovirt-users] Installing 3.4.3 Centos 6.5 >> >> Hi guys, >> >> Please could someone assist me, I'm trying to install ovirt 3.4.3 so I >> can move my current ovirt engine from one server to another. I've done >> a minimal install of Centos 6.5, did a yum update, then I've added in >> the repo and when I run engine-setup and go through all the options, >> it eventually errors out with the following error... >> >> [ ERROR ] Failed to execute stage 'Transaction commit': Command >> '/bin/rpm' failed to execute > > It failed with (among other output): > package ovirt-engine-webadmin-portal is not installed > > What exactly did you install with 'yum install'? If 'ovirt-engine', you > should have also installed 'ovirt-engine-webadmin-portal' which is a > dependency of it. > -- > Didi -- G.Sz.

1 0

Reporting tool for Ovirt not available / not working
by Chandrahasa S 17 Sep '14

17 Sep '14

This is a multipart message in MIME format. --=_alternative 002D622465257D55_= Content-Type: text/plain; charset="US-ASCII" Dear All, We see lots happening on Ovirt overall enhancement, but nothing could see on Ovirt reporting part. Its very difficult to go with Ovirt without having visibility on resource utilization of each component in Ovirt. Is Ovirt project in right path ?? Regards, Chandrahasa S Tata Consultancy Services Data Center- ( Non STPI) 2nd Pokharan Road, Subash Nagar , Mumbai - 400601,Maharashtra India Ph:- +91 22 677-81825 Buzz:- 4221825 Mailto: chandrahasa.s(a)tcs.com Website: http://www.tcs.com ____________________________________________ Experience certainty. IT Services Business Solutions Consulting ____________________________________________ =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 002D622465257D55_= Content-Type: text/html; charset="US-ASCII" Dear All, We see lots happening on Ovirt overall enhancement, but nothing could see on Ovirt reporting part. Its very difficult to go with Ovirt without having visibility on resource utilization of each component in Ovirt. Is Ovirt project in right path ?? Regards, Chandrahasa S Tata Consultancy Services Data Center- ( Non STPI) 2nd Pokharan Road, Subash Nagar , Mumbai - 400601,Maharashtra India Ph:- +91 22 677-81825 Buzz:- 4221825 Mailto: chandrahasa.s(a)tcs.com Website: <a href=http://www.tcs.com/>http://www.tcs.com</a> ____________________________________________ Experience certainty.        IT Services                        Business Solutions                        Consulting ____________________________________________ =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 002D622465257D55_=--

2 4

Multiple ips to a single nic
by Shanil S 17 Sep '14

17 Sep '14

Hi All, I would like to add multiple ips to a single nic using the ovirt api function. Is it possible to assign multiple ips to a single nic using the ovirt api ? -- Regards Shanil

5 5

Moving hosted-engine NFS storage
by Groten, Ryan 16 Sep '14

16 Sep '14

--_000_61A8344D117D814CA4DA393472F38CF4018E1D44ABCD1001M360cor_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I'm planning on moving my hosted-engine storage from one NFS server to anot= her shortly. I was thinking it would be relatively simple: 1. Stop hosted-engine 2. Copy existing share to new nfs share 3. Edit /etc/ovirt-hosted-engine/hosted-engine.conf and change storag= e to the new address 4. Restart hosted-engine services on hosts 5. Restart hosted-engine However online reading says that this won't work because the storage domain= info is stored in different places. Is there a procedure or anything for = how to do this? Thanks, Ryan --_000_61A8344D117D814CA4DA393472F38CF4018E1D44ABCD1001M360cor_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 14 (filtered medium)"><style></style></head><body lang=3DEN-CA link=3Dblue vli= nk=3Dpurple><div class=3DWordSection1>I’m planni= ng on moving my hosted-engine storage from one NFS server to another shortl= y.  I was thinking it would be relatively simple:<o:p></o:p></p= ><o:p> </o:p><![if !supportList= s]>1.       <![endif]>= = Stop hosted-engine<o:p></o:p><![if !supportLists]><span= style=3D'font-size:10.0pt;font-family:"Century Gothic","sans-serif"'><span= style=3D'mso-list:Ignore'>2.&= nbsp;      <![endif]>Copy exi= sting share to new nfs share<o:p></o:p><![if !supportList= s]>3.       <![endif]>= = Edit /etc/ovirt-hosted-engine/hosted-engine.conf and change storage to the = new address<o:p></o:p><![if !supportLists]>4. &nbs= p;     <![endif]>Restart hosted-en= gine services on hosts<o:p></o:p><![if !supportLists]><sp= an style=3D'font-size:10.0pt;font-family:"Century Gothic","sans-serif"'><sp= an style=3D'mso-list:Ignore'>5.       <![endif]>Restar= t hosted-engine<o:p></o:p><o:p> </o:p>= However online reading says that this won&#= 8217;t work because the storage domain info is stored in different places.&= nbsp; Is there a procedure or anything for how to do this?<o:p></o:p></span= ><o:p> </o:p>= = Thanks,<o:p></o:p>Ryan<o:p></o:p></p= ></div></body></html>= --_000_61A8344D117D814CA4DA393472F38CF4018E1D44ABCD1001M360cor_--

1 0

Who's Using oVirt 3.5?
by Brian Proffitt 16 Sep '14

16 Sep '14

As we get ready to release oVirt 3.5, we would like to include user experiences in the press material going out with the release. If anyone has been using the 3.5 betas or RCs, and would like to say a word or two for publication, reply to me, or this thread, and we can get that set up! Thanks! BKP -- Brian Proffitt Community Liason oVirt Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC

1 0

cloud-init issues on fedora ovirt
by Pat Pierson 16 Sep '14

16 Sep '14

I am running ovirt 3.4.3 on a Fedora 19 manager and have 1 node running Fedora 19 as well. I am attempting to get cloud-init to work on a CentOS VM but I am running into issues. I can see where in the log it mounts /dev/sr1 to /tmp/tmp_random_location and where it reads the meta-data.json and user_data from that location but after it unmounts it moves on to /var/lib/cloud/data/instance-id and returns "No instance datasource found! Likely bad things to come!" Has anyone seen this before? Am I missing something? -- Patrick Pierson

2 6

Engine Hardware Crash
by Maurice James 16 Sep '14

16 Sep '14

------=_Part_4017_2110667461.1410353195776 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I just recently had the hardware that acts as the engine crash. I have a blinking amber light on the server. I have servers on the remaining hosts. How do I, or can I use vdsm to interact with the VMs that are still present on those hosts without the engine? ------=_Part_4017_2110667461.1410353195776 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><body><div style="font-family: times new roman, new york, times, serif; font-size: 12pt; color: #000000"><div>I just recently had the hardware that acts as the engine crash. I have a blinking amber light on the server. I have servers on the remaining hosts. How do I, or can I use vdsm to interact with the VMs that are still present on those hosts without the engine? </div></div></body></html> ------=_Part_4017_2110667461.1410353195776--

5 14

Gluster command [<UNKNOWN>] failed on server
by Nathan Stratton 16 Sep '14

16 Sep '14

I gave up on trying to import my gluster config into ovirt so I tried a fresh install and just set the gluster peers without creating any volumes. However none of my hosts will activate, when I try I get: Gluster command [<UNKNOWN>] failed on server virt01a. The only thing I see in vdsm.log is: Thread-3542::DEBUG::2014-09-14 14:35:26,946::__init__::467::jsonrpc.JsonRpcServer::(_serveRequest) Calling 'GlusterHost.list' in bridge with {} Nothing else, can anyone point me into the right direction on how to debug this with so little information? ><> nathan stratton | vp technology | broadsoft, inc | +1-240-404-6580 | www.broadsoft.com

5 7

Proxy Error on wiki.ovirt.org
by Jorick Astrego 16 Sep '14

16 Sep '14

This is a multi-part message in MIME format. --------------040208080900090809010206 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, I tried reaching infra people on IRC but no response. Currently the wiki @ ovirt.org is malfunctioning. This makes it hard to find info for testing day :-& http://wiki.ovirt.org/ Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request /GET / <http://wiki.ovirt.org/>/. Reason: *Error reading from remote server* ------------------------------------------------------------------------ Apache/2.2.15 (Red Hat) Server at wiki.ovirt.org Port 80 Kind regards, Jorick Astrego Netbulae --------------040208080900090809010206 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, I tried reaching infra people on IRC but no response. Currently the wiki @ ovirt.org is malfunctioning. This makes it hard to find info for testing day :-& <a class="moz-txt-link-freetext" href="http://wiki.ovirt.org/">http://wiki.ovirt.org/</a> <blockquote> <h1>Proxy Error</h1> The proxy server received an invalid response from an upstream server. The proxy server could not handle the request <a href="http://wiki.ovirt.org/">GET /</a>. Reason: Error reading from remote server <hr> <address>Apache/2.2.15 (Red Hat) Server at wiki.ovirt.org Port 80</address> </blockquote> Kind regards, Jorick Astrego Netbulae </body> </html> --------------040208080900090809010206--

3 3

Can't understand Template Sub Version
by John Xue 16 Sep '14

16 Sep '14

Hi, All I'm using oVirt Engine Version: 3.4.3-1.el6, but I can't understand this function. I have 3 question: 1 How to change a vm to use other template sub version? I don't want to build a new vm from new template version. 2 How to update a pool to use other template sub version? I'm using non latest version, and shutdown all vm of this pool, but I still can't change template version. 3 How to create a pool with disable stateless function? In the property of template vm, I'm sure I don't enable "stateless". But in the testing, I found all the vm are stateless vm. How to disable it, or I'll lost all config and personal data. Thank you very much! -- Regards, John Xue

2 2

Move ovirt-engine to a new server
by Neil 16 Sep '14

16 Sep '14

Hi guys, Please could someone try assist me. I'm starting to lose hair over this :) I'm trying to migrate my current engine to a new host with the same OS and hostname. Centos 6.5, ovirt-engine-3.4.3-1.el6.noarch I've installed all the packages, I run engine-setup and go through the options keeping the details the same as before, I then restore my config back to /etc/ovirt-engine as well as to /etc/pki/ovirt-engine, but when it gets to trying to restore my database I get the following error... [root@backup dbscripts]# ./restore.sh -u postgres -f /mnt/fw-ovirt-backup/engine-db-2014-09-15-16-48.sql psql: FATAL: Ident authentication failed for user "postgres" Database engine does not exist, please create an empty database named engine. [root@backup dbscripts]# su - postgres -c "psql -d template1 -c 'drop database engine;'" DROP DATABASE [root@backup dbscripts]# su - postgres -c "psql -d template1 -c 'create database engine owner engine;'" CREATE DATABASE [root@backup dbscripts]# ./restore.sh -u postgres -f /mnt/fw-ovirt-backup/engine-db-2014-09-15-16-48.sql psql: FATAL: Ident authentication failed for user "postgres" Database engine does not exist, please create an empty database named engine. or even [root@backup dbscripts]# ./restore.sh -u engine -f /mnt/fw-ovirt-backup/engine-db-2014-09-15-16-48.sql psql: FATAL: Ident authentication failed for user "engine" Database engine does not exist, please create an empty database named engine. This is my pg_hba.conf as well.. # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all ident host engine engine 0.0.0.0/0 md5 host engine engine ::0/0 md5 # IPv4 local connections: host all all 127.0.0.1/32 ident # IPv6 local connections: host all all ::1/128 ident I've done this a couple time before and haven't encountered this issue, so it seems rather odd. Thanks. Regards. Neil Wilson.

2 1

Can't understand Template Sub Version
by John Xue 16 Sep '14

16 Sep '14

Sorry, add the email title. On Mon, Sep 15, 2014 at 3:43 PM, John Xue <xgxjohn(a)gmail.com> wrote: > Hi, All > > I'm using oVirt Engine Version: 3.4.3-1.el6, but I can't > understand this function. I have 3 question: > > 1 How to change a vm to use other template sub version? > I don't want to build a new vm from new template version. > 2 How to update a pool to use other template sub version? > I'm using non latest version, and shutdown all vm of this pool, > but I still can't change template version. > 3 How to create a pool with disable stateless function? > In the property of template vm, I'm sure I don't enable > "stateless". But in the testing, I found all the vm are stateless vm. > How to disable it, or I'll lost all config and personal data. > > Thank you very much! > > -- > Regards, > John Xue -- Regards, John Xue

1 0

ovirt 3.5 rc2 duplicate id (was Re: Duplicate ID 'drive-ide0-1-0' for drive .)
by Gianluca Cecchi 15 Sep '14

15 Sep '14

On Wed, Sep 10, 2014 at 7:01 PM, Dan Kenigsberg <danken(a)redhat.com> wrote: > On Wed, Sep 10, 2014 at 05:17:35PM +0200, Sven Kieske wrote: > > > > > > On 10/09/14 17:05, Nathanaël Blanchet wrote: > > > Hello everyone, > > > > > > I experiment the same error with all of my host with vdsm 4.14.11.2 > since I upgraded to engine 3.4.x. > > > I can't boot any new VMs, and the issue is about the duplicate ID > drive. > > > If I run once instead of "run", the vm boots fine. > > > I've tested the suggested workaround and it works but it is not > comfortable... > > > What about this nasty bug? will it be resolved with 3.4.4? > > > Thanks. > > > > I'm not aware of this bug reported at bugzilla.redhat.com > > > > I may have missed it because there are plenty of bugs, but if you > > don't report the bug there it's not very likely to get fixed. > > I'm not 100% that it's the same issue, but I have cloned > > Bug 1140323 - fails to run VM - duplicate ID > > to 3.4.4. Let's see if what virt developers say. > BTW: the same problem is still present in 3.5. rc2 I just tried with a centos 6.5 iso image. if you "erroneously" (?) attach cd iso during VM initial creation phase and you start VM you get the same problem. Then you use the run once and you are able to install os. But then you continue to have the same problem, even if you modify the VM and you say no cd is present at all. Only able to start it again with run once method. Instead if you create VM without specifying any cd and then you use the run once method to connect the iso and install the VM you get no problem at all with cd isos afterwards. It is quite annoying not being able to recover the situation. In engine.log 2014-09-16 00:22:49,683 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-17) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM c65 is down with error. Exit message: internal error process exited while connecting to monitor: qemu-kvm: -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,serial=: Duplicate ID 'drive-ide0-1-0' for drive . 2014-09-16 00:22:49,684 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-17) Running on vds during rerun failed vm: null 2014-09-16 00:22:49,691 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-17) VM c65 (a858f04a-e4f4-49e8-a097-8ba8390b4d25) is running in db and not running in VDS ovnode04 2014-09-16 00:22:49,710 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-17) Rerun vm a858f04a-e4f4-49e8-a097-8ba8390b4d25. Called from vds ovnode04 2014-09-16 00:22:49,717 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-12) Correlation ID: 7599780, Job ID: 8d63e66b-b26b-4344-85e0-ab72bf53fa1d, Call Stack: null, Custom Event ID: -1, Message: Failed to run VM c65 on Host ovnode04. 2014-09-16 00:22:49,722 INFO [org.ovirt.engine.core.bll.RunVmCommand] (org.ovirt.thread.pool-8-thread-12) Lock Acquired to object EngineLock [exclusiveLocks= key: a858f04a-e4f4-49e8-a097-8ba8390b4d25 value: VM , sharedLocks= ] In VM.log on hypervisor under /var/log/libvirt/qemu/vm.log 2014-09-15 22:22:49.358+0000: starting up LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin QEMU_AUDIO_DRV=spice /usr/libexec/qemu-kvm -na me c65 -S -M rhel6.5.0 -cpu Nehalem -enable-kvm -m 2048 -realtime mlock=off -smp 2,maxcpus =32,sockets=16,cores=2,threads=1 -uuid a858f04a-e4f4-49e8-a097-8ba8390b4d25 -smbios type=1 ,manufacturer=oVirt,product=oVirt Node,version=6-5.el6.centos.11.2,serial=9B1B2F84-3CB9-11 DE-B5A1-001517B493E8,uuid=a858f04a-e4f4-49e8-a097-8ba8390b4d25 -nodefconfig -nodefaults -c hardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/c65.monitor,server,nowait -mon cha rdev=charmonitor,id=monitor,mode=control -rtc base=2014-09-16T00:22:49,driftfix=slew -no-k vm-pit-reinjection -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -devi ce virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x4 -device virtio-serial-pci,id=virtio-serial0,max_ports=16,bus=pci.0,addr=0x5 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive file=/rhev/data-center/4512e567-f94e-476a-a050-6cd0a15e260a/346732c8-e1e9-49de-9ca4-63f4477ef6dd/images/c0a1e1a3-af66-482b-96b4-e8ec928053f7/c968201d-d3fe-4c29-904e-554004a43e3e,if=none,id=drive-scsi0-0-0-0,format=raw,serial=c0a1e1a3-af66-482b-96b4-e8ec928053f7,cache=none,werror=stop,rerror=stop,aio=native -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=29 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:01:a4:a3:42:00,bus=pci.0,addr=0x3 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/a858f04a-e4f4-49e8-a097-8ba8390b4d25.com.redhat.rhevm.vdsm,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/a858f04a-e4f4-49e8-a097-8ba8390b4d25.org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.guest_agent.0 -chardev spicevmc,id=charchannel2,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=3,chardev=charchannel2,id=channel2,name=com.redhat.spice.0 -spice port=5902,tls-port=5903,addr=192.168.1.74,x509-dir=/etc/pki/vdsm/libvirt-spice,tls-channel=main,tls-channel=display,tls-channel=inputs,tls-channel=cursor,tls-channel=playback,tls-channel=record,tls-channel=smartcard,tls-channel=usbredir,seamless-migration=on -k en-us -vga qxl -global qxl-vga.ram_size=67108864 -global qxl-vga.vram_size=33554432 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 qemu-kvm: -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,serial=: Duplicate ID 'drive-ide0-1-0' for drive 2014-09-15 22:22:49.633+0000: shutting down In vdsm.log Thread-159167::ERROR::2014-09-16 00:22:49,849::vm::2326::vm.Vm::(_startUnderlyingVm) vmId=`a858f04a-e4f4-49e8-a097-8ba8390b4d25`::The vm start process failed Traceback (most recent call last): File "/usr/share/vdsm/virt/vm.py", line 2266, in _startUnderlyingVm self._run() File "/usr/share/vdsm/virt/vm.py", line 3368, in _run self._connection.createXML(domxml, flags), File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 111, in wrapper ret = f(*args, **kwargs) File "/usr/lib64/python2.6/site-packages/libvirt.py", line 2665, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: internal error process exited while connecting to monitor: qemu-kvm: -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,serial=: Duplicate ID 'drive-ide0-1-0' for drive Thread-159167::DEBUG::2014-09-16 00:22:49,851::vm::2838::vm.Vm::(setDownStatus) vmId=`a858f04a-e4f4-49e8-a097-8ba8390b4d25`::Changed state to Down: internal error process exited while connecting to monitor: qemu-kvm: -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,serial=: Duplicate ID 'drive-ide0-1-0' for drive (code=1) JsonRpc (StompReactor)::DEBUG::2014-09-16 00:22:50,554::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message <StompFrame command='SEND'> JsonRpcServer::DEBUG::2014-09-16 00:22:50,556::__init__::504::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request Thread-159169::DEBUG::2014-09-16 00:22:50,559::task::595::Storage.TaskManager.Task::(_updateState) Task=`ae3d407b-6c40-455e-a2d7-5ef55d95d1c5`::moving from state init -> state preparing Thread-159169::INFO::2014-09-16 00:22:50,559::logUtils::44::dispatcher::(wrapper) Run and protect: repoStats(options=None) Thread-159169::INFO::2014-09-16 00:22:50,559::logUtils::47::dispatcher::(wrapper) Run and protect: repoStats, Return response: {u'3b23161a-18a3-4cfa-bc78-f4fe2052b19e': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000441651', 'lastCheck': '8.2', 'valid': True}, '346732c8-e1e9-49de-9ca4-63f4477ef6dd': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.000640336', 'lastCheck': '3.5', 'valid': True}} Thread-159169::DEBUG::2014-09-16 00:22:50,559::task::1191::Storage.TaskManager.Task::(prepare) Task=`ae3d407b-6c40-455e-a2d7-5ef55d95d1c5`::finished: {u'3b23161a-18a3-4cfa-bc78-f4fe2052b19e': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000441651', 'lastCheck': '8.2', 'valid': True}, '346732c8-e1e9-49de-9ca4-63f4477ef6dd': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.000640336', 'lastCheck': '3.5', 'valid': True}} Thread-159169::DEBUG::2014-09-16 00:22:50,559::task::595::Storage.TaskManager.Task::(_updateState) Task=`ae3d407b-6c40-455e-a2d7-5ef55d95d1c5`::moving from state preparing -> state finished Thread-159169::DEBUG::2014-09-16 00:22:50,559::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources {} Thread-159169::DEBUG::2014-09-16 00:22:50,559::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {} Thread-159169::DEBUG::2014-09-16 00:22:50,560::task::993::Storage.TaskManager.Task::(_decref) Task=`ae3d407b-6c40-455e-a2d7-5ef55d95d1c5`::ref 0 aborting False Thread-159169::DEBUG::2014-09-16 00:22:50,563::stompReactor::163::yajsonrpc.StompServer::(send) Sending response ... Gianluca

1 0

Real time network usages and IO usages of VM
by Shanil S 15 Sep '14

15 Sep '14

Hi All, Is there any api methods to get the real time network usages and IO usages os of each vm ? I tried it by using api/vms/$id/statistics but its not getting the network and IO usages. Is it possible to get these details using the api calls ? -- Regards Shanil

4 3