- Users - oVirt List Archives

[QE][ACTION NEEDED] oVirt 3.4.2 status
by Sandro Bonazzola 10 Jun '14

10 Jun '14

Hi, We're going to start composing oVirt 3.4.2 GA on *2014-06-10 08:00 UTC* from 3.4.2 branches. The bug tracker [1] shows no blocking bugs for the release There are still 56 bugs [2] targeted to 3.4.2. Excluding node and documentation bugs we still have 27 bugs [3] targeted to 3.4.2. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.4.2 should not be released without them fixed. - Please update the target to any next release for bugs that won't be in 3.4.2: it will ease gathering the blocking bugs for next releases. Critical bugs will be re-targeted to 3.4.3 after 3.4.2 GA release. All remaining bugs will be re-targeted to 3.5.0. - Please fill release notes, the page has been created here [4] - Please build packages before *2014-06-09 15:00 UTC*. Community: - If you're testing oVirt 3.4.2 RC, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1095370 [2] http://red.ht/1oqLLlr [3] http://red.ht/1nIAZXO [4] http://www.ovirt.org/OVirt_3.4.2_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.4.2_Testing Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 2

Ovirt Guest Agent Windows 7
by Jeff Clay 09 Jun '14

09 Jun '14

I have the spice guest agent/tools installed, but I'm reading that I also need to install/setup the ovirt-guest-agent to get proper reporting of resources, etc. I'm following the instructions in https://github.com/oVirt/ovirt-guest-agent/blob/master/ovirt-guest-agent/RE… I am confused at "Update the AGENT_CONFIG global variable in OVirtGuestService.py to point to right configuration location." I can find the file without issue, the value I'm requested to change has a default value of: AGENT_CONFIG = 'ovirt-guest-agent.ini' I cannot locate a file named ovirt-guest-agent.ini within the C:\ovirt-guest-agent-master\ovirt-guest-agent folder so I'm not sure what to set this value to.

4 3

How to create more than 1 vm from template
by John Xue 09 Jun '14

09 Jun '14

Dear all, As you know, we can create 1 vm from template, but how to create many vm at the same time? We call it is a pool. -- Regards, John Xue

2 2

oVirt Self Hosted Engine question
by KevinTang＠umac.mo 09 Jun '14

09 Jun '14

--=_alternative 0015B01048257CF2_= Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="US-ASCII" Dear all, Dear Sean Cohen & Sandro Bonazzola, I found your toturial about oVirt Self Hosted Engine from here, I have a=20 question about it. Would you help me? http://www.ovirt.org/Features/Self=5FHosted=5FEngine My problem is: First, I am Following the tutorial, In machine 'Srv1', type these two=20 command to install oVirt Host & Engine: # yum install ovirt-hosted-engine-setup # hosted-engine --deploy Then I success create a Engine, and I can use web browser to access the=20 Engine in other PC. Then, in second machine 'Srv2', type these two command to install second=20 oVirt Host. # yum install ovirt-hosted-engine-setup # hosted-engine --deploy My first problem is: in second machine 'Srv2', after issue command 'hosted-engine --deploy',=20 and it prompt '[ INFO ] Waiting for VDSM hardware info'. System will ask=20 me and wait my input for (1. Setup finish, 2. Restart VM, 3. Exit). I=20 don't know what should I do now. My second problem is: I use another PC web browser connect to my oVirt Engine, and ask Engine to = add Host 'Srv2' into Cluster. It is done and successful. But when I try to = keep 'Srv2' is running, and make 'Srv1' to reboot. I found that I cannot=20 connect to oVirt Engine anymore. I try to type 'hosted-engine --vm-start'=20 in first machine 'Srv1', but it has error and cannot start my Engine=20 virtual machine. Therefore, I cannot connect to my Engine anymore. How=20 should I do now? My three question is: How to make my Engine become HA? Since when 'Srv1' reboot, the Engine=20 cannot jump to 'Srv2' automatically. Thank you very much. Best Regards, Kevin Tang ---------------------------------------------------------------------------= ----------------------------------------- AMSV - STATE KEY LABORATORY OF ANALOG AND MIXED-SIGNAL VLSI University of Macau Tel: (+853) 8397-8035 --=_alternative 0015B01048257CF2_= Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="US-ASCII" <font size=3D2 face=3D"Verdana">Dear all,</font><br><br><font size=3D2 face= =3D"Verdana">Dear </font><font size=3D2 color=3D#2f2f2f face=3D"sans-s= erif">Sean Cohen & Sandro Bonazzola,</font><br><br><font size=3D2 face=3D"Ver= dana">I found your toturial about oVirt Self Hosted Engine from here, I have a question about it. Would you help me?</fo= nt><br><a href=3Dhttp://www.ovirt.org/Features/Self=5FHosted=5FEngine><font= size=3D2 color=3Dblue face=3D"Verdana"><u>http://www.ovirt.org/Features/Se= lf=5FHosted=5FEngine</u></font></a><font size=3D2 face=3D"sans-serif"><br><= br>My problem is:</font><br><font size=3D2 face=3D"sans-serif"><br>First, I= am Following the tutorial, In machine 'Srv1', type these two command to install oVirt Host & Engine:</font><br><font size=3D2 face=3D"sans-s= erif"># yum install ovirt-hosted-engine-setup</font><br><font size=3D2 face= =3D"sans-serif"># hosted-engine --deploy</font><br><font size=3D2 face=3D"s= ans-serif">Then I success create a Engine, and I can use web browser to access the Engine in other PC.</font><br><br><font= size=3D2 face=3D"sans-serif">Then, in second machine 'Srv2', type these two command to install second oVirt Host.</font><br><font size=3D2 fa= ce=3D"sans-serif"># yum install ovirt-hosted-engine-setup</font><br><font s= ize=3D2 face=3D"sans-serif"># hosted-engine --deploy</font><br><br><font si= ze=3D2 face=3D"sans-serif">My first problem is:</font><br><font size=3D2 fa= ce=3D"sans-serif">in second machine 'Srv2', after issue command 'hosted-engine --deploy', and it prompt '[ INFO  ] Waiting for VDSM hardware info'. System will ask me and wait my input for (1. Setup finish, 2. Restart VM, 3. Exit). I don't know what should I do now.</font><= br><br><font size=3D2 face=3D"sans-serif">My second problem is:</font><br><= font size=3D2 face=3D"sans-serif">I use another PC web browser connect to my oVirt Engine, and ask Engine to add Host 'Srv2' into Cluster. It is done and successful. But when I try to keep 'Srv2' is running, and make 'Srv1' to reboot. I found that I cannot connect to oVirt Engine anymore. I try to type 'hosted-engine --vm-start' in first machine 'Srv1', but it has error and cannot start my Engine virtual machine. Therefore, I cannot connect to my Engine anymore. How should I do now?</font><br><br><font size= =3D2 face=3D"sans-serif">My three question is:</font><br><font size=3D2 fac= e=3D"sans-serif">How to make my Engine become HA? Since when 'Srv1' reboot, the Engine cannot jump to 'Srv2' automatically.<br><br>= Thank you very much.</font><br><font size=3D2 face=3D"sans-serif"><br><br>B= est Regards,<br>Kevin Tang<br>---------------------------------------------= -----------------------------------------------------------------------<br>= AMSV - STATE KEY LABORATORY OF ANALOG AND MIXED-SIGNAL VLSI<br>University o= f Macau<br>Tel: (+853) 8397-8035</font><BR> --=_alternative 0015B01048257CF2_=--

2 1

Rename disks when creating VM from Template
by s k 08 Jun '14

08 Jun '14

--_9ad3ba9d-5dc5-4f01-af85-ac68972e6bb1_ Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable =0A= =0A= =0A= Hello all=2C I have noticed that when I create a VM from a template the disks of the VM = have the name of the Templates's disk. What I would like is to be able to rename the VM's disks based on the hostn= ame. For example the template I use have the following disk names: VM_Template_Disk1VM_Template_Disk2VM_Template_Disk3 When I create a new VM (e.g. testvm01) the disk names remain the same. What= I would like is to be able to rename them automatically as below: testvm01_Disk1testvm01_Disk2testvm01_Disk3 At the moment I'm editing the names manually using the oVirt GUI. Is it possible to do this automatically? Thanks=2C Sokratis=0A= = --_9ad3ba9d-5dc5-4f01-af85-ac68972e6bb1_ Content-Type: text/html; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable <html> <head> </head> <body class=3D'hmmessage'><div dir=3D'ltr'>=0A= =0A= <style></style>=0A= <div dir=3D"ltr">Hello all=2C<div><br></div><div>I have noticed that when I= create a VM from a template the disks of the VM have the name of the Templ= ates's disk.</div><div><br></div><div>What I would like is to be able to re= name the VM's disks based on the hostname.</div><div><br></div><div>For exa= mple the template I use have the following disk names:</div><div><br></div>= <div>VM_Template_Disk1</div><div>VM_Template_Disk2</div><div>VM_Template_Di= sk3</div><div><br></div><div>When I create a new VM (e.g. testvm01) the dis= k names remain the same. What I would like is to be able to rename them aut= omatically as below:</div><div><br></div><div>testvm01_Disk1</div><div>test= vm01_Disk2</div><div>testvm01_Disk3</div><div><br></div><div>At the moment = I'm editing the names manually using the oVirt GUI.</div><div><br></div><di= v>Is it possible to do this automatically?</div><div><br></div><div>Thanks= =2C</div><div><br></div><div>Sokratis</div></div>=0A= </div></body> </html>= --_9ad3ba9d-5dc5-4f01-af85-ac68972e6bb1_--

3 4

Re: [ovirt-users] Spam Re: Spam Windows guest agent
by Karli Sjöberg 08 Jun '14

08 Jun '14

--_000_5F9E965F5A80BC468BE5F40576769F0979FD6905exchange21_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 DQpEZW4gNiBqdW4gMjAxNCAxMzozOSBza3JldiBNYXVyaWNlIEphbWVzIDxtamFtZXNAbWVkaWEt bm9kZS5jb20+Og0KPg0KPiBZZXMgdGhhdCBGTSBpbiBwYXJ0aWN1bGFyIDopDQoNCldoYXQgc3Rl cHMgaW4gaXQgZG8geW91IHRoaW5rIGFyZSBtaXNzaW5nPw0KDQovSw0KDQo+DQo+DQo+DQo+IEZy b206ICJLYXJsaSBTasO2YmVyZyIgPEthcmxpLlNqb2JlcmdAc2x1LnNlPg0KPiBUbzogIk1hdXJp Y2UgSmFtZXMiIDxtamFtZXNAbWVkaWEtbm9kZS5jb20+DQo+IENjOiAidXNlcnMiIDx1c2Vyc0Bv dmlydC5vcmc+DQo+IFNlbnQ6IEZyaWRheSwgSnVuZSA2LCAyMDE0IDE6NTM6MzkgQU0NCj4gU3Vi amVjdDogUmU6IFtvdmlydC11c2Vyc10gU3BhbSAgV2luZG93cyBndWVzdCBhZ2VudA0KPg0KPg0K PiBEZW4gNiBqdW4gMjAxNCAwNTo0NCBza3JldiBNYXVyaWNlIEphbWVzIDxtamFtZXNAbWVkaWEt bm9kZS5jb20+Og0KPiA+DQo+ID4gSXMgdGhlcmUgc29tZSBzcGVjaWFsIHRyaWNrIHRvIGdldCB0 aGUgd2luZG93cyBndWVzdCBhZ2VudCB0byBpbnN0YWxsIHByb3Blcmx5PyBJIGhhdmUgdGhlIHNl cnZpY2UgaW5zdGFsbGVkIGJ1dCBpdCB3b250IHN0YXJ0LiBQZXJoYXBzIHNvbWVvbmUgbWFkZSBh IHlvdXR1YmUgdmlkZW8gb2YgdGhlIGluc3RhbGwuIEkgc2F3IHNvbWUgcHJpb3IgcG9zdHMgd2hl cmUgb3RoZXIgd2VyZSBoYXZpbmcgaXNzdWVzIGJ1dCB3aGVuIHRoZXkgYXNrZWQgZm9yIGhlbHBl ZCB0aGV5IGdvdCB0aGUgb2xkIFJURk0gYW5zd2VyLiBUaGUgcHJvYmxlbSBpcyB0aGUgRk0gc2Vl bXMgdG8gYmUgbWlzc2luZyBzb21lIHN0ZXBzLiBBbnkgaGVscCB3b3VsZCBiZSBhcHByZWNpYXRl ZC4gVGhhbmtzDQo+DQo+IFlvdSBtZWFuIHRoaXNbMV0gRk0/DQo+DQo+IFsxXSBodHRwOi8vd3d3 Lm92aXJ0Lm9yZy9PVmlydF9HdWVzdF9BZ2VudF9Gb3JfV2luZG93cw0KPg0KPiAvSw0KPg0KPg0K --_000_5F9E965F5A80BC468BE5F40576769F0979FD6905exchange21_ Content-Type: text/html; charset="utf-8" Content-ID: <F962F1409ACA364F987B2BAC4BC4A18B(a)ad.slu.se> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5Pg0KPHAgZGlyPSJsdHIi Pjxicj4NCkRlbiA2IGp1biAyMDE0IDEzOjM5IHNrcmV2IE1hdXJpY2UgSmFtZXMgJmx0O21qYW1l c0BtZWRpYS1ub2RlLmNvbSZndDs6PGJyPg0KJmd0Ozxicj4NCiZndDsgWWVzIHRoYXQgRk0gaW4g cGFydGljdWxhciA6KTwvcD4NCjxwIGRpcj0ibHRyIj5XaGF0IHN0ZXBzIGluIGl0IGRvIHlvdSB0 aGluayBhcmUgbWlzc2luZz88L3A+DQo8cCBkaXI9Imx0ciI+L0s8L3A+DQo8cCBkaXI9Imx0ciI+ Jmd0Ozxicj4NCiZndDs8YnI+DQomZ3Q7PGJyPg0KJmd0OyBGcm9tOiAmcXVvdDtLYXJsaSBTasO2 YmVyZyZxdW90OyAmbHQ7S2FybGkuU2pvYmVyZ0BzbHUuc2UmZ3Q7PGJyPg0KJmd0OyBUbzogJnF1 b3Q7TWF1cmljZSBKYW1lcyZxdW90OyAmbHQ7bWphbWVzQG1lZGlhLW5vZGUuY29tJmd0Ozxicj4N CiZndDsgQ2M6ICZxdW90O3VzZXJzJnF1b3Q7ICZsdDt1c2Vyc0BvdmlydC5vcmcmZ3Q7PGJyPg0K Jmd0OyBTZW50OiBGcmlkYXksIEp1bmUgNiwgMjAxNCAxOjUzOjM5IEFNPGJyPg0KJmd0OyBTdWJq ZWN0OiBSZTogW292aXJ0LXVzZXJzXSBTcGFtICZuYnNwO1dpbmRvd3MgZ3Vlc3QgYWdlbnQ8YnI+ DQomZ3Q7PGJyPg0KJmd0Ozxicj4NCiZndDsgRGVuIDYganVuIDIwMTQgMDU6NDQgc2tyZXYgTWF1 cmljZSBKYW1lcyAmbHQ7bWphbWVzQG1lZGlhLW5vZGUuY29tJmd0Ozo8YnI+DQomZ3Q7ICZndDs8 YnI+DQomZ3Q7ICZndDsgSXMgdGhlcmUgc29tZSBzcGVjaWFsIHRyaWNrIHRvIGdldCB0aGUgd2lu ZG93cyBndWVzdCBhZ2VudCB0byBpbnN0YWxsIHByb3Blcmx5PyBJIGhhdmUgdGhlIHNlcnZpY2Ug aW5zdGFsbGVkIGJ1dCBpdCB3b250IHN0YXJ0LiBQZXJoYXBzIHNvbWVvbmUgbWFkZSBhIHlvdXR1 YmUgdmlkZW8gb2YgdGhlIGluc3RhbGwuIEkgc2F3IHNvbWUgcHJpb3IgcG9zdHMgd2hlcmUgb3Ro ZXIgd2VyZSBoYXZpbmcgaXNzdWVzIGJ1dCB3aGVuIHRoZXkgYXNrZWQNCiBmb3IgaGVscGVkIHRo ZXkgZ290IHRoZSBvbGQgUlRGTSBhbnN3ZXIuIFRoZSBwcm9ibGVtIGlzIHRoZSBGTSBzZWVtcyB0 byBiZSBtaXNzaW5nIHNvbWUgc3RlcHMuIEFueSBoZWxwIHdvdWxkIGJlIGFwcHJlY2lhdGVkLiBU aGFua3M8YnI+DQomZ3Q7PGJyPg0KJmd0OyBZb3UgbWVhbiB0aGlzWzFdIEZNPzxicj4NCiZndDs8 YnI+DQomZ3Q7IFsxXSBodHRwOi8vd3d3Lm92aXJ0Lm9yZy9PVmlydF9HdWVzdF9BZ2VudF9Gb3Jf V2luZG93czxicj4NCiZndDs8YnI+DQomZ3Q7IC9LPGJyPg0KJmd0Ozxicj4NCiZndDs8YnI+DQo8 L3A+DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_5F9E965F5A80BC468BE5F40576769F0979FD6905exchange21_--

7 8

Call for Papers Deadline in 2 Weeks: Open World Forum
by Brian Proffitt 08 Jun '14

08 Jun '14

Conference: Open World Forum 2014 Information: This year's program will show you how to take back control of your digital world, including IT/IS and (personal) data, whether you are a professional or not. Stop losing control and discover how Free and Open Source software may help you be more and more independent, whether technologically, legally or financially. Date: October 30-November 1, 2014 Location: Paris, France Website: http://openworldforum.org/ Call for Papers Deadline: June 22, 2014 Call for Papers URL: http://openworldforum.org/en/cfp/ -- Brian Proffitt oVirt Community Manager Project Atomic Community Lead Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC

1 0

Call for Papers Deadline in One Week: Fossetcon 2014
by Brian Proffitt 08 Jun '14

08 Jun '14

Conference: Fossetcon 2014 Information: Fossetcon relies on the Free and Open Source Software Community for support in making Fossetcon a memorable event that aims to be: The Gateway to the Open Source Community. They are currently seeking talks on virtualization. Date: Sept 11-13, 2014 Location: Orlando, Florida Website: http://fossetcon.org/2014/ Call for Papers Deadline: June 15, 2014 Call for Papers URL: http://fossetcon.org/2014/call-papers-and-registration -- Brian Proffitt oVirt Community Manager Project Atomic Community Lead Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC

1 0

Dashboard Button inside Administrator Portal redirects to "Specified page not found"
by Christian Rebel 08 Jun '14

08 Jun '14

This is a multipart message in MIME format. ------=_NextPart_000_0043_01CF7CF8.9DA5DBE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, =20 My problem is that the Dasboard Button inside the Administrator Portal redirects me to an empty page where =84Specified page not found=93 is = displayed. =20 All the rest (e.g. clicking on show reports) inside the Adminitrator = Portal redirects me to the correct site for the Engine Report, so SSO its ok as well. I=B4m also able to login as admin user to the Engine Report Site directly, but in that case I=B4m not getting the =93Create Button=94, I = see only the Home, View and Manage Buttons. Also if I=B4m clicking on on the left = site to Resources, Webadmin Dashboards, CE it looks ok, the only Problem is = that I can only choose =93Default=94 and not my defined names=85 =20 I=B4m running oVirt 3.4.1 with Jasper 5.5.0 based on Build: = 20131024_0957 at different sites and all of them have the same problem. I could not find any Root Cause for it, so I hope that someone else can = help me to find out whats wrong in my systems=85 =20 Thanks in advance, Christian =20 =20 =20 ------=_NextPart_000_0043_01CF7CF8.9DA5DBE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"><meta name=3DGenerator content=3D"Microsoft Word = 14 (filtered medium)"><style></style></head><body lang=3DDE-AT link=3Dblue = vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span = lang=3DEN-US style=3D'mso-fareast-language:DE-AT'>Hi = all,<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'><o:p> </o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'>My problem is that the Dasboard = Button inside the Administrator Portal redirects me to an empty page = where „Specified page not found“ is = displayed.<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'><o:p> </o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'>All the rest (e.g. clicking on show = reports) inside the Adminitrator Portal redirects me to the correct site = for the Engine Report, so SSO its ok as well. I=B4m also able to login = as admin user to the Engine Report Site directly, but in that case I=B4m = not getting the “Create Button”, I see only the Home, View = and Manage Buttons. Also if I=B4m clicking on on the left site to = Resources, Webadmin Dashboards, CE it looks ok, the only Problem is that = I can only choose “Default” and not my defined = names…<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'><o:p> </o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'>I=B4m running </span><span = lang=3DEN-US style=3D'color:black;mso-fareast-language:DE-AT'>oVirt = 3.4.1 with Jasper 5.5.0 based on </span><span lang=3DEN-US = style=3D'color:black;background:white'>Build:<span = class=3Dapple-converted-space> </span><span class=3Demphasis><span = style=3D'border:none windowtext 1.0pt;padding:0cm'>20131024_0957 at = different sites and all of them have the same = problem.<o:p></o:p></span></span></span></p><p class=3DMsoNormal><span = lang=3DEN-US style=3D'mso-fareast-language:DE-AT'>I could not find any = Root Cause for it, so I hope that someone else can help me to find out = whats wrong in my systems…<o:p></o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'><o:p> </o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'>Thanks in = advance,<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US = style=3D'mso-fareast-language:DE-AT'>Christian<o:p></o:p></span></p><p = class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal><o:p> </o:p></p></div></body></html> ------=_NextPart_000_0043_01CF7CF8.9DA5DBE0--

2 2

Memory and swap issue
by Jeff Clay 06 Jun '14

06 Jun '14

I'm getting the following error trying to start a VM. I have 64 gb of RAM on this host. I got this error once before and found that my swap partition was only 2gb or so. I increased the swap size to 124GB and the problem went away. Below is the error when trying to start a VM and below that is what my output from "free -g". I don't see why I'm getting a swap file error when there's plenty of it available. - Cannot run VM. Host swap percentage is above the defined threshold. - Check your configuration parameters for Host Swap Percentage. - Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details: - The host USARPAOVRTHOST02 did not satisfy internal filter Memory. [root@usarpaovrthost02 ~]# free -g total used free shared buffers cached Mem: 62 62 0 0 0 12 -/+ buffers/cache: 50 12 Swap: 123 12 110 [root@usarpaovrthost02 ~]# [root@usarpaovrthost02 ~]# [root@usarpaovrthost02 ~]# swapon -s Filename Type Size Used Priority /dev/dm-1 partition 129490936 12811000 -1 [root@usarpaovrthost02 ~]#

3 9

Re: [ovirt-users] Spam Re: Spam Re: Spam Windows guest agent
by Sandro Bonazzola 06 Jun '14

06 Jun '14

Il 06/06/2014 16:07, René Koch ha scritto: > On 06/06/2014 03:56 PM, Sandro Bonazzola wrote: >> Il 06/06/2014 15:29, Maurice James ha scritto: >>> I think I got it. Just a few key steps that are not obvious for us python for windows virgins. I will send in some screen shots with text so that >>> someone with write access to the wiki can edit and post it >> >> >> I suggest to try the shiny new ovirt-guest-tools iso. You can find more info here: >> http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools > > Cool, didn't know that there's already an ISO available. > > I just tried it and oVirt Guest Tools Installers says "Unsupported Windows version" for my Windows Server 2012 R2 vm. Is this known or should I open a > bugreport for this? If I remember correctly 2012 R2 and 8.1 are not supported yet. > >> >> >>> >>> >>> >>> ------------------------------------------------------------------------------------------------------------------------------------------------------ >>> *From: *"Joop" <jvdwege(a)xs4all.nl> >>> *To: *users(a)ovirt.org >>> *Sent: *Friday, June 6, 2014 8:27:53 AM >>> *Subject: *Re: [ovirt-users] Spam Re: Spam Windows guest agent >>> >>> On 6-6-2014 14:14, Karli Sjöberg wrote: >>> >>> >>> Den 6 jun 2014 13:39 skrev Maurice James <mjames(a)media-node.com>: >>> > >>> > Yes that FM in particular :) >>> >>> >>> The step of py2exe doesn't work: can't open File 'setup.py': [Errno 2] No such file or directory >>> My cd is where README-windows is located and the archive of today (-10min ago) >>> >>> Just copying the parent dir to 'Program Files' and execute what is in the README will work though. Thats how I have done it all the time. >>> >>> Joop >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> >> -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Re: [ovirt-users] Spam Re: Spam Windows guest agent
by Joop 06 Jun '14

06 Jun '14

On 6-6-2014 14:34, René Koch wrote: > On 06/06/2014 02:27 PM, Joop wrote: >> On 6-6-2014 14:14, Karli Sjöberg wrote: >>> >>> >>> Den 6 jun 2014 13:39 skrev Maurice James <mjames(a)media-node.com>: >>> > >>> > Yes that FM in particular :) >>> >>> >> The step of py2exe doesn't work: can't open File 'setup.py': [Errno 2] >> No such file or directory >> My cd is where README-windows is located and the archive of today >> (-10min ago) > > You have to be in ovirt-guest-agent/ovirt-guest-agent and in this > directoy is a setup.py (and also the README-windows.txt as mentioned > in oVirt wiki) file. It worked for me the last time I did this - > haven't tried it today... > Found the problem, downloaded the zip file using the the button on github. It doesn''t include the setup.py :-( Joop

1 0

Re: [ovirt-users] Spam Windows guest agent
by Karli Sjöberg 06 Jun '14

06 Jun '14

--_000_5F9E965F5A80BC468BE5F40576769F0979FD639Eexchange21_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 DQpEZW4gNiBqdW4gMjAxNCAwNTo0NCBza3JldiBNYXVyaWNlIEphbWVzIDxtamFtZXNAbWVkaWEt bm9kZS5jb20+Og0KPg0KPiBJcyB0aGVyZSBzb21lIHNwZWNpYWwgdHJpY2sgdG8gZ2V0IHRoZSB3 aW5kb3dzIGd1ZXN0IGFnZW50IHRvIGluc3RhbGwgcHJvcGVybHk/IEkgaGF2ZSB0aGUgc2Vydmlj ZSBpbnN0YWxsZWQgYnV0IGl0IHdvbnQgc3RhcnQuIFBlcmhhcHMgc29tZW9uZSBtYWRlIGEgeW91 dHViZSB2aWRlbyBvZiB0aGUgaW5zdGFsbC4gSSBzYXcgc29tZSBwcmlvciBwb3N0cyB3aGVyZSBv dGhlciB3ZXJlIGhhdmluZyBpc3N1ZXMgYnV0IHdoZW4gdGhleSBhc2tlZCBmb3IgaGVscGVkIHRo ZXkgZ290IHRoZSBvbGQgUlRGTSBhbnN3ZXIuIFRoZSBwcm9ibGVtIGlzIHRoZSBGTSBzZWVtcyB0 byBiZSBtaXNzaW5nIHNvbWUgc3RlcHMuIEFueSBoZWxwIHdvdWxkIGJlIGFwcHJlY2lhdGVkLiBU aGFua3MNCg0KWW91IG1lYW4gdGhpc1sxXSBGTT8NCg0KWzFdIGh0dHA6Ly93d3cub3ZpcnQub3Jn L09WaXJ0X0d1ZXN0X0FnZW50X0Zvcl9XaW5kb3dzDQoNCi9LDQo= --_000_5F9E965F5A80BC468BE5F40576769F0979FD639Eexchange21_ Content-Type: text/html; charset="utf-8" Content-ID: <B4309FC1C2B1484B9012FD71D8F995AF(a)ad.slu.se> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5Pg0KPHAgZGlyPSJsdHIi Pjxicj4NCkRlbiA2IGp1biAyMDE0IDA1OjQ0IHNrcmV2IE1hdXJpY2UgSmFtZXMgJmx0O21qYW1l c0BtZWRpYS1ub2RlLmNvbSZndDs6PGJyPg0KJmd0Ozxicj4NCiZndDsgSXMgdGhlcmUgc29tZSBz cGVjaWFsIHRyaWNrIHRvIGdldCB0aGUgd2luZG93cyBndWVzdCBhZ2VudCB0byBpbnN0YWxsIHBy b3Blcmx5PyBJIGhhdmUgdGhlIHNlcnZpY2UgaW5zdGFsbGVkIGJ1dCBpdCB3b250IHN0YXJ0LiBQ ZXJoYXBzIHNvbWVvbmUgbWFkZSBhIHlvdXR1YmUgdmlkZW8gb2YgdGhlIGluc3RhbGwuIEkgc2F3 IHNvbWUgcHJpb3IgcG9zdHMgd2hlcmUgb3RoZXIgd2VyZSBoYXZpbmcgaXNzdWVzIGJ1dCB3aGVu IHRoZXkgYXNrZWQNCiBmb3IgaGVscGVkIHRoZXkgZ290IHRoZSBvbGQgUlRGTSBhbnN3ZXIuIFRo ZSBwcm9ibGVtIGlzIHRoZSBGTSBzZWVtcyB0byBiZSBtaXNzaW5nIHNvbWUgc3RlcHMuIEFueSBo ZWxwIHdvdWxkIGJlIGFwcHJlY2lhdGVkLiBUaGFua3M8L3A+DQo8cCBkaXI9Imx0ciI+WW91IG1l YW4gdGhpc1sxXSBGTT88L3A+DQo8cCBkaXI9Imx0ciI+WzFdIGh0dHA6Ly93d3cub3ZpcnQub3Jn L09WaXJ0X0d1ZXN0X0FnZW50X0Zvcl9XaW5kb3dzPC9wPg0KPHAgZGlyPSJsdHIiPi9LPC9wPg0K PC9ib2R5Pg0KPC9odG1sPg0K --_000_5F9E965F5A80BC468BE5F40576769F0979FD639Eexchange21_--

2 1

Issue / strange behavior with GlusterFS nodes
by René Koch 06 Jun '14

06 Jun '14

Hi, I have the following oVirt setup: 2 storage hosts with GlusterFS (replicated) - will be extended to 4 hosts (distributed-replicated) 4 virtualization hosts 1 datacenter 2 clusters (1 only for virtualization, 1 only for GlusterFS) The strange thing is now: One of the 2 GlusterFS hosts (these hosts and the Gluster volumes are managed by oVirt) fails to mount one of the storage domains, but I can mount it manually. So the first question is: why should these hosts mount the storage domains? They are in a cluster without virtualization, so it's not possible to run virtual machines on these hosts. I think they try to mount the storage domains because the storage domains are attached to the data center, but imho the cluster should be checked as well if virtualization is enabled. So I was thinking of moving the GlusterFS cluster to a new data center without storage domains, but this is impossible as Gluster volumes are created. The only possibility would be to remove the Gluster volume. So do you have any idea how I can solve this issue? I mean the Gluster volume is working fine, but it's really disturbing that I get an error message every 5 minutes. Thanks! -- Best Regards René Koch Senior Solution Architect ============================================ LIS-Linuxland GmbH Brünner Straße 163, A-1210 Vienna Phone: +43 1 236 91 60 Mobile: +43 660 / 512 21 31 E-Mail: rkoch(a)linuxland.at ============================================

3 3

Cann't ping guest from outside
by John Xue 06 Jun '14

06 Jun '14

I am testing ovirth, my test environment are: Host: nested virtualization ESXi5.5+CentOS 6.4_x86_64 Guest: Ubuntu14.04_i386 Now, ping CentOS <-> guest and outside are OK Outside <-> gest Fail I am using bridge connection, I try to tcpdump [root@centos vdsm]# brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no rhevm 8000.005056ae45e5 no eth0 vnet0 [root@centos vdsm]# brctl showmacs rhevm port no mac addr is local? ageing timer 2 fe:1a:4a:0c:14:41 yes 0.00 [root@centos vdsm]# ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 00:50:56:AE:45:E5 rhevm Link encap:Ethernet HWaddr 00:50:56:AE:45:E5 vnet0 Link encap:Ethernet HWaddr FE:1A:4A:0C:14:41 [root@centos vdsm]# service iptables stop [root@centos vdsm]# tcpdump 11:34:59.267379 ARP, Request who-has GUESTIP tell OUTSIDEPCIP, length 46 11:34:59.268017 ARP, Reply GUESTIP is-at 00:1a:4a:0c:14:41 (oui Unknown), length 28 I can see only arp working, how do I check this problem? and how vdsm convert from FE:1A:4A:0C:14:41 to guest mac 00:1a:4a:0c:14:41? Thank you! -- Regards, John Xue

1 2

Spam Windows guest agent
by Maurice James 06 Jun '14

06 Jun '14

------=_Part_6401_1423447798.1402026260770 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Is there some special trick to get the windows guest agent to install properly? I have the service installed but it wont start. Perhaps someone made a youtube video of the install. I saw some prior posts where other were having issues but when they asked for helped they got the old RTFM answer. The problem is the FM seems to be missing some steps. Any help would be appreciated. Thanks ------=_Part_6401_1423447798.1402026260770 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><body><div style="font-family: times new roman, new york, times, serif; font-size: 12pt; color: #000000"><div><span name="x">Is there some special trick to get the windows guest agent to install properly? I have the service installed but it wont start. Perhaps someone made a youtube video of the install. I saw some prior posts where other were having issues but when they asked for helped they got the old RTFM answer. The problem is the FM seems to be missing some steps. Any help would be appreciated. Thanks</span><br></div></div></body></html> ------=_Part_6401_1423447798.1402026260770--

1 0

Firewall?
by Ovirt User 05 Jun '14

05 Jun '14

Hello Guys, i'm searching for a simple firewall solution ( deny some ports etc ). It is possibile configure a firewall in the node ? to protect the vm's ? Thanks Lukas

7 16

oVirt 3.5.0 Second Alpha postponed due to jenkins issues
by Sandro Bonazzola 05 Jun '14

05 Jun '14

Hi, we discovered that some projects jenkins nightly build jobs weren't providing nightly rpms in the last week. In order to allow basic sanity testing before releasing second alpha, its release has been postponed to tomorrow. Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Help creating virtual machines in ovirt
by Grant Tailor 04 Jun '14

04 Jun '14

Yes the host is up. Please see below *[root@host3 ~]# tail 50 /var/log/ovirt-engine/engine.logtail: cannot open `50' for reading: No such file or directory==> /var/log/ovirt-engine/engine.log <== 2014-05-26 12:29:18,886 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] START, CreateVmVDSCommand(HostName = HOST2.247CLUSTERS.COM <http://HOST2.247CLUSTERS.COM>, HostId = 905d89cd-158a-4b1b-bea5-c6c3180e71f1, vmId=aaca739d-dea0-4b17-a088-36bd3b8ab4a4, vm=VM [VM1]), log id: 302deca2 2014-05-26 12:29:18,905 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] START, CreateVDSCommand(HostName = HOST2.247CLUSTERS.COM <http://HOST2.247CLUSTERS.COM>, HostId = 905d89cd-158a-4b1b-bea5-c6c3180e71f1, vmId=aaca739d-dea0-4b17-a088-36bd3b8ab4a4, vm=VM [VM1]), log id: 4853232e 2014-05-26 12:29:18,912 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] Command CreateVDSCommand(HostName = HOST2.247CLUSTERS.COM <http://HOST2.247CLUSTERS.COM>, HostId = 905d89cd-158a-4b1b-bea5-c6c3180e71f1, vmId=aaca739d-dea0-4b17-a088-36bd3b8ab4a4, vm=VM [VM1]) execution failed. Exception: VDSNetworkException: org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't supported, if isEnabledForExtensions() == false 2014-05-26 12:29:18,914 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] FINISH, CreateVDSCommand, log id: 4853232e2014-05-26 12:29:18,914 ERROR [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] VDS::create Failed creating vm VM1 in vds = 905d89cd-158a-4b1b-bea5-c6c3180e71f1 : HOST2.247CLUSTERS.COM <http://HOST2.247CLUSTERS.COM> error = org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't supported, if isEnabledForExtensions() == false 2014-05-26 12:29:18,915 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] FINISH, CreateVmVDSCommand, return: Down, log id: 302deca22014-05-26 12:29:18,915 INFO [org.ovirt.engine.core.bll.RunVmOnceCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] Lock freed to object EngineLock [exclusiveLocks= key: aaca739d-dea0-4b17-a088-36bd3b8ab4a4 value: VM , sharedLocks= ]2014-05-26 12:29:18,916 ERROR [org.ovirt.engine.core.bll.RunVmOnceCommand] (ajp--127.0.0.1-8702-1) [1ffd0b64] Command org.ovirt.engine.core.bll.RunVmOnceCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't supported, if isEnabledForExtensions() == false (Failed with error VDS_NETWORK_ERROR and code 5022) 2014-05-26 12:29:18,938 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ajp--127.0.0.1-8702-1) [1ffd0b64] Correlation ID: 1ffd0b64, Job ID: 10b543cd-f174-46a3-9578-d7ed2ba88d3e, Call Stack: null, Custom Event ID: -1, Message: Failed to run VM VM1 (User: admin).*

6 25

oVirt weekly sync cancelled this week (June 4th)
by Doron Fediuck 04 Jun '14

04 Jun '14

Hi all, due to various holidays this week the weekly oVirt sync will be cancelled and we'll meet next week (June 11th). Doron

2 1

[QE][ACTION NEEDED] oVirt 3.5.0 Second Alpha status
by Sandro Bonazzola 04 Jun '14

04 Jun '14

Hi, We're going to compose a Second Alpha on Thu *2014-06-05 08:00 UTC*. Maintainers: - Please be sure that master snapshot allow to create VMs before *2014-06-04 15:00 UTC* The bug tracker [1] shows the following proposed blockers to be reviewed: Bug ID Whiteboard Status Summary 1001100 integration NEW Add log gathering for a new ovirt module (External scheduler) 1073944 integration ASSIGNED Add log gathering for a new ovirt module (External scheduler) 1060198 integration NEW [RFE] add support for Fedora 20 1100236 integration NEW all-in-one setup should configure cluster compatibility as max common between vdsm and engine Feature freeze has been postponed to 2014-06-15 and the following features should be testable in 3.5.0 Alpha according to Features Status Table [2] Group oVirt BZ Title gluster 1096713 Monitoring (UI plugin) Dashboard (Integrated with Nagios monitoring) infra 1090530 [RFE] Please add host count and guest count columns to "Clusters" tab in webadmin infra 1078738 [RFE] make ovirt easy configurable to allow redirection of all logs to syslog infra 1054778 [RFE] Allow to perform fence operations from a host in another DC infra 1090803 [RFE] Change the "Slot" field to "Service Profile" when cisco_ucs is selected as the fencing type infra 1090511 [RFE] Improve fencing robustness by retrying failed attempts infra 1090800 [RFE] Add periodic power management health check to detect/warn about link-down detection of power management LAN infra 1090794 [RFE] Search VMs based on MAC address from web-admin portal infra 1090793 consider the event type while printing events to engine.log infra 1090796 [RFE] Re-work engine ovirt-node host-deploy sequence infra 1090798 [RFE] Admin GUI - Add host uptime information to the "General" tab infra 1090808 [RFE] Ability to dismiss alerts and events from web-admin portal infra 1058737 [RFE] Restart HA VMs ASAP infra-api 1090797 [RFE] RESTAPI: Add /tags sub-collection for Template resource infra-dwh 1091686 prevent OutOfMemoryError after starting the dwh service. infra-dwh 1091687 History DB should sync user's first and last name for user usage tables integration 1026933 (partial: iso available) ovirt-guest-tools-iso similar to rhev-guest-tools-iso and uploaded to ISO domain by default network 1078836 Add a warning when adding display network network 1079719 Display of NIC Slave/Bond fault on Event Log network 1080984 Support bridging_opts functionality within oVirt network 1080987 Support ethtool_opts functionality within oVirt network 1078862 Providing Neutron Applience storage 1054241 Store OVF on any domains storage 1055640 Get rid of storage pool metadata on master storage domain storage 1083312 Disk alias recycling in web-admin portal storage 1086181 [RFE] Snapshot overview in webadmin portal ux 1064543 oVirt new look and feel [PatternFly adoption] - phase #1 virt 1058832 Allow to clone a (down) VM without snapshot/template virt 1031040 can't set different keymap for vnc via runonce option virt 1043471 oVirt guest agent for SLES virt 1073453 Debian 7 support (incl. 1043474 oVirt guest agent for Debian) virt 1072313 Edit Running Vm virt 1083049 add progress bar for vm migration virt 1083065 EL 7 guest compatibility virt Allow guest serial number to be configurable virt 1047624 [RFE] support BIOS boot device menu virt 1083129 allows setting netbios name, locale, language and keyboard settings for windows vm's virt 1038632 spice-html5 button to show debug console/output window virt 1080002 [RFE] Enable user defined Windows Sysprep file Some more features may be included since they were near to be completed on last sync meeting. The table will be updated on next sync meeting scheduled for 2014-06-04. There are still 373 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 311 bugs [4] targeted to 3.5.0. Maintainers / Assignee: - Please remember to rebuild your packages before *2014-06-04 15:00 UTC* if needed, otherwise nightly snapshot will be taken. - Please be sure that master snapshot allow to create VMs before *2014-06-04 15:00 UTC* - If you find a blocker bug please remember to add it to the tracker [1] - Please start filling release notes, the page has been created here [5] - Please review and add test cases to oVirt 3.5 Test Day [6] Community: - You're welcome to join us testing this alpha release and getting involved in oVirt Quality Assurance[7]! [1] http://bugzilla.redhat.com/1073943 [2] http://bit.ly/17qBn6F [3] http://red.ht/1pVEk7H [4] http://red.ht/1rLCJwF [5] http://www.ovirt.org/OVirt_3.5_Release_Notes [6] http://www.ovirt.org/OVirt_3.5_TestDay [7] http://www.ovirt.org/OVirt_Quality_Assurance Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Re: [ovirt-users] Help creating virtual machines in ovirt
by Grant Tailor 04 Jun '14

04 Jun '14

Thanks a lot Rene..the local storage worked..really appreciate it Now the issue i am facing now is with SPICE or noVNC console still not working Loaded plugins: fastestmirror, versionlock Loading mirror speeds from cached hostfile Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=x86_64 error was 12: Timeout on https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=x86_64: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds') * base: centos.aol.com * extras: mirror.lug.udel.edu * ovirt-3.4-epel: mirror.metrocast.net * ovirt-3.4-jpackage-6.0- generic: ftp.heanet.ie * ovirt-3.4-stable: mirrors.ibiblio.org * updates: mirror.sanctuaryhost.com base | 3.7 kB 00:00 extras | 3.4 kB 00:00 ovirt-3.4-glusterfs-epel | 2.9 kB 00:00 ovirt-3.4-glusterfs-noarch-epel | 2.9 kB 00:00 ovirt-3.4-jpackage-6.0-generic | 1.9 kB 00:00 ovirt-3.4-stable | 2.9 kB 00:00 updates | 3.4 kB 00:00 updates/primary_db | 3.2 MB 00:01 Setting up Install Process No package ovirt-websocket-proxy available. Error: Nothing to do On Tue, Jun 3, 2014 at 3:24 AM, René Koch <rkoch(a)linuxland.at> wrote: > On 06/03/2014 03:10 AM, Grant Tailor wrote: > >> I think when i tried to create local storage a datacenter was >> automatically created >> >> before i had the host under "Default" datacenter but when i tried >> creating local storage, it created another datacenter for me. >> >> Now what do i put for the Path for the local storage? >> > > That's the path to the folder on your host which should contain your vm > disk files. If you want your vm disks under /data/vms then use this path. > > Just make sure the path exists, no files are in this directory and that it > is writable by 36:36 (vdsm:kvm). > > > Regards, > René > > >> >> >> On Mon, Jun 2, 2014 at 8:29 PM, Maurice James <mjames(a)media-node.com >> <mailto:mjames@media-node.com>> wrote: >> >> I havent dabbled with local storage yet. Maybe someone can jump in >> here >> >> >> ------------------------------------------------------------ >> ------------ >> *From: *"Grant Tailor" <therealwebguru(a)gmail.com >> <mailto:therealwebguru@gmail.com>> >> *To: *"Maurice James" <mjames(a)media-node.com >> <mailto:mjames@media-node.com>> >> *Cc: *"Omer Frenkel" <ofrenkel(a)redhat.com >> <mailto:ofrenkel@redhat.com>>, users(a)ovirt.org <mailto: >> users(a)ovirt.org> >> *Sent: *Monday, June 2, 2014 8:24:52 PM >> >> *Subject: *Re: [ovirt-users] Help creating virtual machines in ovirt >> >> >> Thanks a lot..will try that now >> >> What about local storage? >> What do i put for path? >> >> >> On Mon, Jun 2, 2014 at 8:23 PM, Maurice James <mjames(a)media-node.com >> <mailto:mjames@media-node.com>> wrote: >> >> Run the following commands >> >> #yum install ovirt-websocket-proxy >> #chkconfig ovirt-websocket-proxy on >> #service ovirt-websocket-proxy start >> >> Then you have to trust the CA that issued the ovirt certificate by >> pointing your browser to the following address >> https://<ovirt address>/ca.crt >> Trust the certificate >> >> You should now be able to use the HTML 5 viewer >> >> ------------------------------------------------------------ >> ------------ >> *From: *"Grant Tailor" <therealwebguru(a)gmail.com >> <mailto:therealwebguru@gmail.com>> >> *To: *"Maurice James" <mjames(a)media-node.com >> <mailto:mjames@media-node.com>> >> *Cc: *"Omer Frenkel" <ofrenkel(a)redhat.com >> <mailto:ofrenkel@redhat.com>>, users(a)ovirt.org >> <mailto:users@ovirt.org> >> *Sent: *Monday, June 2, 2014 8:11:05 PM >> >> *Subject: *Re: [ovirt-users] Help creating virtual machines in >> ovirt >> >> >> Anyone willing to help? >> >> #1. >> "make sure that ovirt-engine-websocket-proxy is installed and >> configured" >> >> How do i do this? How do i install and configure websocket >> proxy? Any step by step guide on this? >> >> #2 >> What do i put for the path to local storage to create local >> storage? >> Please see screenshot attached. >> >> >> >> On Sun, Jun 1, 2014 at 11:13 PM, Grant Tailor >> <therealwebguru(a)gmail.com <mailto:therealwebguru@gmail.com>> >> wrote: >> >> #1. >> "make sure that ovirt-engine-websocket-proxy is installed >> and configured" >> >> How do i do this? How do i install and configure websocket >> proxy? Any step by step guide on this? >> >> #2 >> What do i put for the path to local storage to create local >> storage? >> Please see screenshot attached. >> >> >> >> >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >>

1 0

Template assignment
by Maurice James 04 Jun '14

04 Jun '14

------=_Part_5769_1035496700.1401713087099 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Is there any way to change the template assignment of an already created vm? This is related to my live disk migration problem. I found that all of the vms that I created that were based on the out of the box Blank template would fail. I created a new "Default" template and created a vm based on it and was able to live migrate the disk. I need to be able to change the template its based on because I already have close to 30 VMs created based on the old "Blank" template ------=_Part_5769_1035496700.1401713087099 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><body><div style="font-family: times new roman, new york, times, serif; font-size: 12pt; color: #000000"><div><br>Is there any way to change the template assignment of an already created vm? This is related to my live disk migration problem. I found that all of the vms that I created that were based on the out of the box Blank template would fail. I created a new "Default" template and created a vm based on it and was able to live migrate the disk. I need to be able to change the template its based on because I already have close to 30 VMs created based on the old "Blank" template <br></div></div></body></html> ------=_Part_5769_1035496700.1401713087099--

3 5

Re: [ovirt-users] [Spice-devel] USB redirection
by Marian Krcmarik 03 Jun '14

03 Jun '14

----- Original Message ----- > From: "René Koch" <rkoch(a)linuxland.at> > To: "Marian Krcmarik" <mkrcmari(a)redhat.com> > Cc: "Christophe Fergeau" <cfergeau(a)redhat.com>, "spice-devel" <spice-devel(a)lists.freedesktop.org>, Users(a)ovirt.org > Sent: Tuesday, June 3, 2014 1:56:36 PM > Subject: Re: [Spice-devel] [ovirt-users] USB redirection > > > On 06/03/2014 12:47 PM, Marian Krcmarik wrote: > > > > > > ----- Original Message ----- > >> From: "René Koch" <rkoch(a)linuxland.at> > >> To: "Christophe Fergeau" <cfergeau(a)redhat.com> > >> Cc: "spice-devel" <spice-devel(a)lists.freedesktop.org>, Users(a)ovirt.org > >> Sent: Tuesday, June 3, 2014 12:10:42 PM > >> Subject: Re: [Spice-devel] [ovirt-users] USB redirection > >> > >> On 06/03/2014 11:53 AM, Christophe Fergeau wrote: > >>> On Tue, Jun 03, 2014 at 10:58:55AM +0200, René Koch wrote: > >>>> Btw, I also figured out that Fedora 20 (the client) blocks USB > >>>> redirection > >>>> if you have SELinux on enforcing - setting it to permissive works. > >>> > >>> I don't think this is intentional. Can you report it on > >>> bugzilla.redhat.com if this is happening on an up-to-date f20? > >> > >> Done: https://bugzilla.redhat.com/show_bug.cgi?id=1104110 > > Rene, > > What's the value of mozilla_plugin_use_spice sebool - "getsebool > > mozilla_plugin_use_spice"? Make it on if it's off - "setsebool -P > > mozilla_plugin_use_spice on" > > If This is the problem It should be solved in > > selinux-policy-3.12.1-116.fc20 > > (https://bugzilla.redhat.com/show_bug.cgi?id=1049491) > > It's off. > Setting it to on did solve the issue. > > I have selinux-policy-3.12.1-166.fc20.noarch installed. Is it intended > that the boolean is still off? I'm not aware of the SELinux update > policy if activating booleans is allowed or not. For this issue it would > be good, but on the other hand if I change it manually (for whatever > reason) I wouldn't want it to be changed by the package... The policy is to keep the currently set value - the value is not being reset to the new default when updating the selinux policy (as you assumed). So if you did update It should be still off. > > >> > >>> > >>> Christophe > >>> > >> _______________________________________________ > >> Spice-devel mailing list > >> Spice-devel(a)lists.freedesktop.org > >> http://lists.freedesktop.org/mailman/listinfo/spice-devel > >> >

2 1

Re: [ovirt-users] [Spice-devel] USB redirection
by Marian Krcmarik 03 Jun '14

03 Jun '14

----- Original Message ----- > From: "René Koch" <rkoch(a)linuxland.at> > To: "Christophe Fergeau" <cfergeau(a)redhat.com> > Cc: "spice-devel" <spice-devel(a)lists.freedesktop.org>, Users(a)ovirt.org > Sent: Tuesday, June 3, 2014 12:10:42 PM > Subject: Re: [Spice-devel] [ovirt-users] USB redirection > > On 06/03/2014 11:53 AM, Christophe Fergeau wrote: > > On Tue, Jun 03, 2014 at 10:58:55AM +0200, René Koch wrote: > >> Btw, I also figured out that Fedora 20 (the client) blocks USB redirection > >> if you have SELinux on enforcing - setting it to permissive works. > > > > I don't think this is intentional. Can you report it on > > bugzilla.redhat.com if this is happening on an up-to-date f20? > > Done: https://bugzilla.redhat.com/show_bug.cgi?id=1104110 Rene, What's the value of mozilla_plugin_use_spice sebool - "getsebool mozilla_plugin_use_spice"? Make it on if it's off - "setsebool -P mozilla_plugin_use_spice on" If This is the problem It should be solved in selinux-policy-3.12.1-116.fc20 (https://bugzilla.redhat.com/show_bug.cgi?id=1049491) > > > > > Christophe > > > _______________________________________________ > Spice-devel mailing list > Spice-devel(a)lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/spice-devel >

2 1