- Users - oVirt List Archives

Re: [Users] el6 live snapshots and storage migration
by Sven Kieske 20 Mar '14

20 Mar '14

forwarding to the List as this may be interesting for others: -------- Original-Nachricht -------- Betreff: Re: [Users] el6 live snapshots and storage migration Datum: Wed, 19 Mar 2014 11:32:15 +0100 Von: Ernest Beinrohr <Ernest.Beinrohr(a)axonpro.sk> Organisation: AXON PRO An: Sven Kieske <S.Kieske(a)mittwald.de> This may be another option: wget http://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/RHEV/SRPMS/qem… sha256sum qemu-kvm-rhev-0.12.1.2-2.415.el6_5.5.src.rpm # check with http://rhn.redhat.com/errata/RHBA-2014-0248.html yum-builddep /archiv/qemu-kvm-rhev-0.12.1.2-2.415.el6_5.5.src.rpm rpmbuild --rebuild /archiv/qemu-kvm-rhev-0.12.1.2-2.415.el6_5.5.src.rpm

5 6

Re: [Users] Ovirt 3.3.3 to 3.3.4 upgrade issues Centos 6
by Gary Lloyd 20 Mar '14

20 Mar '14

I must have checked that box at some point and forgot about it. It is working fine now thanks. *Gary Lloyd* ---------------------------------- IT Services Keele University ----------------------------------- On 19 March 2014 17:15, René Koch <rkoch(a)linuxland.at> wrote: > On 03/19/2014 05:19 PM, Gary Lloyd wrote: > >> I have tested an upgrade from engine 3.3.3 to 3.3.4 under centos 6. It >> seems that the vdsm nodes are now showing as non-operational and the >> only way I have been able to cure this was to: >> >> - Upgrade the vdsm version on a node to 4.13.3-4 >> - install vdsm-gluster >> - start glusterd service >> > > Did you check "Enable Gluster Service" for your cluster? If so, you need > vdsm-gluster installed on all hosts. If you don't use GlusterFS on your > hosts, disable this setting for your cluster. > > > Regards, > René > > >> We are only currently using ISCSI. I cannot get a node running >> vdsm-4.13.3-3 to show as being operational under engine 3.3.4 >> >> Has anyone been able to get 3.3.4 functioning with previous version vdsm >> nodes ? >> >> This issue may hinder our progress when it comes time to upgrade our >> production engine / nodes when putting hosts into maintenance mode and >> performing migrations etc. >> >> Thanks >> >> /Gary Lloyd/ >> ---------------------------------- >> IT Services >> Keele University >> ----------------------------------- >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >>

1 0

[Users] Clone from Snapshot
by Tejesh M 20 Mar '14

20 Mar '14

Hi, I'm trying to clone a VM from snapshot with the below code. but it is not cloning.. org.ovirt.engine.sdk.decorators.VM vm2 = api.getVMs().get("testVM"); VM cloneVM = new VM(); cloneVM.setName("MyClonedViaAPI"); VMSnapshot snap3 = new VMSnapshot(null); snap3 = vm2.getSnapshots().get(UUID.fromString("7799ce3f-a007-415a-84c5-df323e8f440d")); Action act = new Action(); act.setClone(true); act.setVm(cloneVM); snap3.restore(act); Actually, my original goal is to Clone VM directly from another VM instead of cloning from snapshot. Can you help me? -- Thanks & Regards Tejesh

2 1

[Users] Changing IP address of NFS storage server
by René Koch 20 Mar '14

20 Mar '14

Hi, I have an old oVirt 3.2 setup and I have to change the ip address of the data storage domain (NFS). Even if I shut down all vms I can't detach the data storage domain and reimport it as vms and templates are configured in oVirt which have their disk on this storage domain. Is there a way to change the ip? Maybe using the database? Would this be possible in 3.3 or 3.4? Thanks a lot for tips! -- Best Regards René Koch Senior Solution Architect ============================================ LIS-Linuxland GmbH Brünner Straße 163, A-1210 Vienna Phone: +43 1 236 91 60 Mobile: +43 660 / 512 21 31 E-Mail: rkoch(a)linuxland.at ============================================

3 4

[Users] Ovirt 3.3.3 to 3.3.4 upgrade issues Centos 6
by Gary Lloyd 20 Mar '14

20 Mar '14

I have tested an upgrade from engine 3.3.3 to 3.3.4 under centos 6. It seems that the vdsm nodes are now showing as non-operational and the only way I have been able to cure this was to: - Upgrade the vdsm version on a node to 4.13.3-4 - install vdsm-gluster - start glusterd service We are only currently using ISCSI. I cannot get a node running vdsm-4.13.3-3 to show as being operational under engine 3.3.4 Has anyone been able to get 3.3.4 functioning with previous version vdsm nodes ? This issue may hinder our progress when it comes time to upgrade our production engine / nodes when putting hosts into maintenance mode and performing migrations etc. Thanks *Gary Lloyd* ---------------------------------- IT Services Keele University -----------------------------------

3 2

Re: [Users] GSoC 14 Idea Discussion - virt-sparsify integration
by Federico Simoncelli 20 Mar '14

20 Mar '14

----- Original Message ----- > From: "Utkarsh Singh" <utkarshsins(a)gmail.com> > To: users(a)ovirt.org > Cc: fsimonce(a)redhat.com > Sent: Friday, March 7, 2014 6:16:46 PM > Subject: GSoC 14 Idea Discussion - virt-sparsify integration > > Hello, > > I am Utkarsh, a 4th year undergrad from IIT Delhi and a GSoC-14 > aspirant. I have been lately involved in an ongoing project Baadal > Cloud Computing Platform in my institute, which has got me interested > in oVirt for a potential GSoC project. > > I was going through the virt-sparsify integration project idea. I have > gone through the architecture documentation on the oVirt website. As > far as I understand, the virt-sparsify integration needs to be done on > the VDSM daemon, and it's control is either going to be completely > independent of ovirt-engine (for example running it once every 24 > hours), or it's something that is centrally controlled by the > ovirt-engine through XML/RPC calls. The details are not specified in > the project ideas page. I would like to ask - The request to sparsifying the image is controlled by ovirt-engine. The user will pick one (or eventually more) disk(s) that are not in use (vm down) and he'll request to sparsify it/them. > 1. What would be the proposed ideal implementation? (Central-Control > or Independent-Control) Central-Control > 2. Is virt-sparsify usage going to be automated or > administrator-triggered, or a combination of both? administrator-triggered > There are some aspects of the idea, which I would like to discuss > before I start working on a proposal. > > It's not necessary that an automated usage of virt-sparsify is limited > to any simple idea. Architecture documentation states that > ovirt-engine has features like Monitoring that would allow > administrators (and possibly users) to be aware of vm-guest > performance as well as vm-host performance. I am not very sure about > how this data is collected, Is it done through MoM, or Is this > directly done by VDSM, or is someone else doing this (for hosts). It > would be great if someone can explain that to me. This information > about vm-guest usage and vm-host health can help in determining how > virt-sparsify is to be used. The vm/hosts statistics are gathered and provided by VDSM. Anyway I would leave this part out at the moment. The virt-sparsify command is a long running task and in the current architecture it can be only an SPM task. There is some ongoing work to remove the pool and the SPM (making virt-sparsify operable by any host) but I wouldn't block on that. > I am also not very clear about the Shared Storage component in the > architecture. Does oVirt make any assumptions about the Shared > Storage. For example, the performance difference between running > virt-sparsify on NFS as compared to running it (if possible) directly > on storage hardware. If the Storage solution is necessarily a NAS > instance, then virt-sparsify on NFS mount is the only option. The storage connections are already managed by vdsm and the volume chains are maintained transparently in /rhev/data-center/... There are few differences between image files on NFS/Gluster and images stored on LVs but with regard to how to reach them it is transparent (similar path). > Right now, I am in the process of setting up oVirt on my system, and > getting more familiar with the architecture. Regarding my experience. > I am acquainted with both Java and Python. I have little experience > with JBoss, but I have worked on some other Web Application Servers > like web2py and Play Framework. My involvement in Baadal Platform has > got me acquainted with libvirt/QEMU, the details of which I have > mentioned below (if anyone is interested). Depending on the amount of time that you can dedicate to this project it seems that you could tackle both the vdsm and ovirt-engine parts. -- Federico

1 0

[Users] el6 live snapshots and storage migration
by Simon Barrett 19 Mar '14

19 Mar '14

--_000_D86C48DF8800164BBE50B87623F7AC95481E29ADln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Is there any current combination of el6 based Engine and Node iso that supp= ort live snapshots and storage migration? I tried oVirt Node - 3.0.4 - 1.0.2014012912 but had problems with VDSM comp= atibility (VDSM version (4.14) and cannot join cluster - cluster is compat= ible with VDSM versions [4.13, 4.9, 4.11, 4.12, 4.10].) I now see this ment= ioned in https://bugzilla.redhat.com/show_bug.cgi?id=3D1067096#c0 I did try upgrading Engine to 3.3.4-1.el6 but still see the same VDSM 4.14 = problem. I also tried building the iso (as per http://www.ovirt.org/Node_Building) a= nd could see that it was downloading the qemu-kvm-rhev (which I think is ne= eded to enable the live snapshot functionality). However I got stuck adding= the vdsm plugin as the iso was being built with the 3.4.0.57rhs versions o= f the glusterfs packages whereas the plugin was dependant on glusterfs 3.4= .0-8. I already have a working Engine (3.3.2-1.el6) and Node (3.0.1 - 1.0.2.el6) = test configuration but would very much like to be able to add the live snap= shot functionality. Many thanks Simon --_000_D86C48DF8800164BBE50B87623F7AC95481E29ADln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Is there any current combination of el6 based Engine= and Node iso that support live snapshots and storage migration?<o:p></o:p>= </p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I tried oVirt Node - 3.0.4 - 1.0.2014012912 but had = problems with VDSM compatibility (VDSM version (4.14) and cannot join clust= er  - cluster is compatible with VDSM versions [4.13, 4.9, 4.11, 4.12,= 4.10].) I now see this mentioned in <a href=3D"https://bugzilla.redhat.com/show_bug.cgi?id=3D1067096#c0">https:= //bugzilla.redhat.com/show_bug.cgi?id=3D1067096#c0</a><o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I did try upgrading Engine to 3.3.4-1.el6 but still = see the same VDSM 4.14 problem.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I also tried building the iso (as per http://www.ovi= rt.org/Node_Building) and could see that it was downloading the qemu-kvm-rh= ev (which I think is needed to enable the live snapshot functionality). How= ever I got stuck adding the vdsm plugin as the iso was being built with the 3.4.0.57rhs versions of the glusterfs = packages whereas the plugin was dependant on glusterfs  3.4.0-8.<o:p><= /o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I already have a working Engine (<span class=3D"gwt-= inlinelabel">3.3.2-1.el6) and Node (3.0.1 - 1.0.2.el6) test configuration b= ut would very much like to be able to add the live snapshot functionality.<= o:p></o:p></span></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Many thanks<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Simon<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC95481E29ADln2wio001devtra_--

3 3

[Users] [RFI] GUI Changes for oVirt 4.0
by Itamar Heim 19 Mar '14

19 Mar '14

Hi, we are brainstorming on what should we change in the oVirt UI for 4.0. for current brainstorming phase, "anything goes" - i.e., I'd like us to ignore current limitations and flows, and envision/fantasize the "perfect solution". SO - what do YOU think we should consider for 4.0 UI concept, flows, etc. Thanks, Itamar

8 9

[Users] CPU: Westmere vs. Ivy Bridge
by Joshua Dotson 19 Mar '14

19 Mar '14

Hello, The nodes on the cluster I'm installing have Ivy Bridge CPUs<http://ark.intel.com/products/75790/Intel-Xeon-Processor-E5-2630-v2-15M-Cac…>. The latest choice I see in the hosted-engine installer is Westmere. Am I missing out on anything significant by choosing Westmere in this case? Is there any plan to add Ivy Bridge as an option? Even if there is no difference behind the scenes from choosing Westmere, having an Ivy Bridge option would have saved me the time it took to reverse engineer the need to look at the source code to the need for the CPU family: instruction sets (performance?). Thanks, Joshua

2 1

[Users] [ANN] oVirt 3.4.0 Second Release Candidate is now available
by Sandro Bonazzola 19 Mar '14

19 Mar '14

The oVirt team is pleased to announce that the 3.4.0 Second Release Candidate is now available for testing. Release notes and information on the changes for this update are still being worked on and will be available soon on the wiki[1]. Please ensure to follow install instruction from release notes if you're going to test it. The existing repository ovirt-3.4.0-prerelease has been updated for delivering this release candidate and future refreshes until final release. An oVirt Node iso will also be available soon. We decided to postpone Final Release by one week in order to properly test the bugs fixed since last Release Candidate. Help us make this the best release ever, testing it yourself! [1] http://www.ovirt.org/OVirt_3.4.0_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

9 21

[Users] Cannot set Compatibility Version to 3.3
by Eric Wong 19 Mar '14

19 Mar '14

--_000_87E152BF0D55124F8311754D69D209F635546218MSEX02FRA9corps_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello oVirt gurus out there: I recently upgraded our oVirt 3.1 installation to 3.3.3. We have 2 cluster= s configuration. In the QA cluster, in which there is only one host, I can= switch the cluster's compatibility version from 3.1 to 3.3. However, on the production cluster, in which there are 10 hosts, I am not a= ble to switch the cluster compatibility version at all. I opened up the Ed= it Cluster window. Select 3.3 from the Compatibility Version dropdown list= . Click OK to save the change. But the Edit Cluster window just remain op= en. I checked all the logs in the ovirt-engine. Do not see anything obvious. = All our hosts are running CentOS 6.5 & vdsm-4.13.3-4. Can you guys provide some pointers as to where to check for failure? Thanks in advance. Eric --_000_87E152BF0D55124F8311754D69D209F635546218MSEX02FRA9corps_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hello oVirt gurus out there:<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I recently upgraded our oVirt 3.1 installation to 3.= 3.3.  We have 2 clusters configuration.  In the QA cluster, in wh= ich there is only one host, I can switch the cluster’s compatibility = version from 3.1 to 3.3.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">However, on the production cluster, in which there a= re 10 hosts, I am not able to switch the cluster compatibility version at a= ll.  I opened up the Edit Cluster window.  Select 3.3 from the Co= mpatibility Version dropdown list.  Click OK to save the change.  But the Edit Cluster window just remain open.<o:= p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I checked all the logs in the ovirt-engine.  Do= not see anything obvious.  All our hosts are running CentOS 6.5 &= vdsm-4.13.3-4.  <o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Can you guys provide some pointers as to where to ch= eck for failure?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks in advance.<o:p></o:p></p> <p class=3D"MsoNormal">Eric<span style=3D"color:#1F497D"><o:p></o:p></span>= </p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_87E152BF0D55124F8311754D69D209F635546218MSEX02FRA9corps_--

2 1

[Users] changing the password of the ovirt root ca
by Sven Kieske 19 Mar '14

19 Mar '14

Hi, does it have any side effects if I change the password which protects the private root CA key ? I guess not, but I want to be sure :-) -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 3

[Users] Attach floppy as [sysprep] to VM - API
by Tejesh M 18 Mar '14

18 Mar '14

Hi, I want to attach floppy as [sysprep] to windows VM in the Run once via API. can you help? I want to do sysprep on windows 2008

2 3

[Users] affects of changing compatibility setting on running cluster
by Charles Weber 18 Mar '14

18 Mar '14

Hi everyone, I believe I need to change my cluster compatibility level and would like to know if I can do this ona live cluster or if I have to change everything to maintenance mode first. I ran engine setup and upgraded to current engine level then tried to add a new node using the 3.3.4 el6 iso. This resulted in an error: Host x.x.x.x is installed with VDSM version (4.14) and cannot join cluster Default which is compatible with VDSM versions [4.13,4.9,4.11,4.12,4.10]. My current versions are: Engine 3.3.4-1.el6 at compatibiltiy version 3.2 2 Nodes running CentOS 6.4 with VDSM 4.10.3-0.36.23.el6 Am I correct that I need to change the compatibility version to 3.3? This has some production VMs, do I need to turn everything off first or is this a non-interruptive change? How will this upgrade affect my current 2 hosts at their version? My original idea was to migrate working VMs to new ovirt ISO node and then re-install original nodes to the same version off the 3.3.4 el6 iso. I appreciate any advice. Chuck

7 18

Re: [Users] Instructions to add a remote controlled power strip not in the native list?
by Yedidyah Bar David 17 Mar '14

17 Mar '14

------=_Part_1021355_2144139839.1395071630139 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, (Replying also to the list) ----- Original Message ----- > From: "David Smith" <dsmith(a)mypchelp.com> > To: "Yedidyah Bar David" <didi(a)redhat.com> > Sent: Monday, March 17, 2014 5:01:55 PM > Subject: Re: [Users] Instructions to add a remote controlled power strip not > in the native list? > Hi Yedidyah, > Keep in mind it appears that your instructions are assuming some level of in > depth knowledge of *some* database not described in that thread. > In other words, for someone not extremely familiar with the oVirt database > location and tables, would not have a clue as to what you're talking about > in this email. > I'm guessing this database is located locally on my ovirt-engine, but I > wouldn't know where to start in how to get into it without causing major > problems (ie, do I need to turn off the engine first?) and it would help if > there were a detailed example with sql commands to make the necessary > modifications to the dB to add a fence agent completely. This wasn't my email, it was Eli Mesika's. I just remembered that he sent it so it was easy to find. I agree that the instructions are not complete. The database was created during setup - you were asked about that and probably accepted the defaults, which create a local database called 'engine'. You can connect to it by doing: su - postgres psql engine Obviously, do not change anything before you understand what you are doing and have some good backup. You can read, and usually update, without taking the engine down. There is quite a lot of material on the ovirt wiki - please search and read a bit - e.g. for 'ovirt database'. Do not hesitate to ask (on-list) again if you have questions. You can also ask on irc for faster help. Best regards, -- Didi ------=_Part_1021355_2144139839.1395071630139 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: times new roman, new york, times, se= rif; font-size: 12pt; color: #000000"><div>Hi,<br></div><div><br></div><div= >(Replying also to the list)</div><div><br></div><hr id=3D"zwchr"><blockquo= te style=3D"border-left:2px solid #1010FF;margin-left:5px;padding-left:5px;= color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-f= amily:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"David Smith= " <dsmith(a)mypchelp.com><br><b>To: </b>"Yedidyah Bar David" <didi@r= edhat.com><br><b>Sent: </b>Monday, March 17, 2014 5:01:55 PM<br><b>Subje= ct: </b>Re: [Users] Instructions to add a remote controlled power strip not= in the native list?<br><div><br></div><div dir=3D"ltr">Hi Yedidyah,<div>Ke= ep in mind it appears that your instructions are assuming some level of in = depth knowledge of *some* database not described in that thread. </div= ></div></blockquote><blockquote style=3D"border-left:2px solid #1010FF;marg= in-left:5px;padding-left:5px;color:#000;font-weight:normal;font-style:norma= l;text-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12p= t;"><div dir=3D"ltr"><div><br></div><div>In other words, for someone not ex= tremely familiar with the oVirt database location and tables, would not hav= e a clue as to what you're talking about in this email.</div><div><br></div= ><div>I'm guessing this database is located locally on my ovirt-engine, but= I wouldn't know where to start in how to get into it without causing major= problems (ie, do I need to turn off the engine first?) and it would help i= f there were a detailed example with sql commands to make the necessary mod= ifications to the dB to add a fence agent completely.</div></div></blockquo= te><div><br></div><div><div>This wasn't my email, it was Eli Mesika's. I ju= st remembered that he sent it so it was easy to find.</div><div><br></div><= div>I agree that the instructions are not complete.</div><div><br></div><di= v>The database was created during setup - you were asked about that and pro= bably accepted the defaults,</div><div>which create a local database called= 'engine'. You can connect to it by doing:</div><div>su - postgres</div><di= v>psql engine</div><div><br></div><div>Obviously, do not change anything be= fore you understand what you are doing and have some good backup.</div><div= >You can read, and usually update, without taking the engine down.</div><di= v><br></div><div>There is quite a lot of material on the ovirt wiki - pleas= e search and read a bit - e.g. for 'ovirt database'.</div><div><br></div><d= iv>Do not hesitate to ask (on-list) again if you have questions.</div><div>= <br></div><div>You can also ask on irc for faster help.</div></div><div><br= ></div><div>Best regards,</div><div>-- <br></div><div><span name=3D"x"></sp= an>Didi<br><span name=3D"x"></span><br></div></div></body></html> ------=_Part_1021355_2144139839.1395071630139--

2 1

[Users] migration of VM, which protocol actually works?
by aditya mamidwar 17 Mar '14

17 Mar '14

i wanted to learn about the modules so that i could understand how the engine POSTS and sends data to the backend sql database and other scripts to perform various options. for e.g i need to know which code actually collects the storage path for the ISO s during ISCSI storage domain setup. also how the hosts, clusters and data centers are made and stored at the backend. if i want to add a new UI that bypasses some of these complicated tasks (again for personal understanding), will I be able to do that. Also i would like to mention that am working on making a little changes to how the ISCSI protocol works.. My another doubt is: when are the NFS/ISCSI/FC protocols actually used in ovirt. like what part of the VM running state? are their purpose limited to just copying the ISO from the storage center to the path required by the Host. Are the protocols them self responsible for sending and getting data during VM execution on a node. The concept of node and migration has left me a little confused. since each node can run multiple VMs , so during the running/execution of the VM , do the network protocols actully work, if not , then how is that achieved. if yes, again my question arises, which module should i focus on regarding this issue. thanks -- -Aditya Mamidwar

2 1

[Users] Request for Wiki - dates
by Bob Doolittle 17 Mar '14

17 Mar '14

Hi, As most are aware, there's a lot of information on the Ovirt Wiki that's out of date. In spite of our best efforts, that will probably always be true - it's the nature of Wikis. When I look for information on our Wiki, I never know where the most current information is. I think it would be really helpful if someplace on each Wiki page was a useful date to let us know the currency of the info. Probably the most useful date is last-modified, although creation date might also be useful. Maybe we could even map/display the date to the version number of whatever the current stable release was at the time for context (sometimes the content of a page calls out a particular version it's addressing, but a lot of the time it does not). Just as an example, I want to find out about migrating my existing configuration to self-hosted, using 3.4 RC2. A google search shows the following links (in order shown): http://www.ovirt.org/Features/Self_Hosted_Engine http://www.ovirt.org/Migrate_to_Hosted_Engine http://www.ovirt.org/Hosted_Engine_Howto ... I'm sure the Features page is ancient at this point. It's hard to tell about the 2nd page. Of course the date a page was last modified doesn't directly indicate how correct/current the information is, but there's a correlation. Knowing the date would be useful in making a judgment. It might even help the task of identifying and cleaning up obsolete pages. Easy to do? -Bob

6 13

[Users] Industry Events: Call for Papers Update, March 17, 2014
by Brian Proffitt 17 Mar '14

17 Mar '14

The following is a list of industry events that oVirt community members may want to attend and give presentations. If you are interested in speaking, or if you know of other events not on this list, please contact me at bkp(a)redhat.com. --- Open Source Bridge Jun 24-27 Portland, OR http://opensourcebridge.org/ Call for papers deadline: 4/4/2014 Call for papers URL: http://opensourcebridge.org/events/2014/proposals LISA Nov. 9-14 Seattle, WA https://www.usenix.org/conference/lisa14 Call for papers deadline: 4/14/2014 Call for papers URL: https://www.usenix.org/conference/lisa14/call-for-participation DockerConf June 6 London, UK http://dockerconf.com/ Call for papers: Open (deadline not known) Call for papers URL: http://bit.ly/1fnHtSA LinuxCon/CloudOpen NA Aug. 20-22 Chicago, IL http://events.linuxfoundation.org/events/linuxcon-north-america Call for papers deadline: 5/2/2014 Call for papers URL: http://events.linuxfoundation.org/events/linuxcon-north-america/program/cfp LinuxCon/CloudOpen Europe Oct. 13-15 http://events.linuxfoundation.org/events/cloudopen-europe Dusseldorf, Germany Call for papers deadline: 7/11/2014 Call for papers URL: http://events.linuxfoundation.org/events/cloudopen-europe/program/cfp KVM Forum Oct. 14-16 Dusseldorf, Germany http://events.linuxfoundation.org/events/kvm-forum Call for papers: Not Open Linux.conf.au Jan. 12-16, 2015 Auckland, NZ Call for papers: Not Open -- Brian Proffitt - oVirt Community Manager Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 312 477 4320 / Cell: +1 574 383 9BKP IRC: bkp

1 0

[Users] Migrate simple configuration to self-hosted
by Bob Doolittle 17 Mar '14

17 Mar '14

Hi, I want to migrate my existing deployment to self-hosted. I have a simple deployment: A: Machine Fedora 20 B: libvirt VM (hosted on A) RHEL 6.5 running Engine 3.3.4-1 C: Machine RHEL 6.5 acts as Hypervisor/Host/Node (VDSM 4.13.3-4) ISO NFS Domain is on B Data (Master) NFS Domain is on C I want to migrate VM B to Machine C, as self-hosted, and free up Machine A When I look at these instructions: http://www.ovirt.org/Migrate_to_Hosted_Engine It starts with "I installed a new host with fedora 19". I don't understand this. Won't most people doing this migration want to start with their existing Hypervisor/Host/Node, and migrate their Engine to it? Do I really need a new 3rd machine, when my goal is to free up one of my 2 existing machines? Or can I go ahead and assume these instructions are fine to apply to an existing Host already running VDSM 4.13.3-4? I would have (naively?) imagined that the typical migration would be something like: 0. Upgrade Engine and Host to 3.4 1. Create a new VM 2. Install OS on new VM, start it up 3. Backup current Engine 4. Stop current Engine (leave Host and VM running), change hostname (local and DNS), maybe power off for good luck until done 5. Login to new VM (probably using ssh unless there's a way to connect directly to the VM via Spice/VNC while the Engine is down) to: A. Assign previous Engine hostname to it (local and DNS), possibly reboot B. Set it up as a self-hosted Engine C. Restore backup to it D. Start up new engine What am I missing? Thanks, Bob

3 4

[Users] feedback-on-oVirt-engine-3.3.4-1.el6
by kirtech_support 17 Mar '14

17 Mar '14

Good day, how can I create additional users for a user portal?

2 1

[Users] Host CPU type is not compatible with Cluster Properties
by Hans Hinrichsen Hills 16 Mar '14

16 Mar '14

This is a multipart message in MIME format. ------=_NextPart_000_01B8_01CF3F9E.DF1742E0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I'm learning (self-learning) about Ovirt Server, and I had Inatlled in one IBM Server xSeries 209 with CentOS release 6.5 (Final) 64 bit. I setup ovirt engine with no problem. In the same server I try to put de same Host and receive the following messages: Host MiPrueba moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU Features : <UNKNOWN>. In the console, the host is market with Host CPU type is not compatible with Cluster Properties cpuFlags = 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clf lush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs ,bts,pni,dtes64,monitor,ds_cpl,est,cid,cx16,xtpr,lahf_lm,model_coreduo' I need to know if I can use this server to ovirt-engine Saludos cordiales, Hans Hinrichsen Hills ------=_NextPart_000_01B8_01CF3F9E.DF1742E0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 = (filtered medium)"><style></style></head><body lang=3DES-CL link=3Dblue = vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span = lang=3DEN-US>I’m learning (self-learning) about Ovirt Server, and = I had Inatlled in one IBM Server xSeries 209 with CentOS release 6.5 = (Final) 64 bit. I setup ovirt engine with no problem. In the same server = I try to put de same Host and receive the following = messages:<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US>Host MiPrueba moved to Non-Operational state as host does = not meet the cluster’s minimum CPU level. Missing CPU Features : = <UNKNOWN>.<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US>In the console, the host is market with Host CPU type is = not compatible with Cluster Properties<o:p></o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US><o:p> </o:p></span></p><p = class=3DMsoNormal><span lang=3DEN-US>cpuFlags =3D = 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,= clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_ts= c,pebs,bts,pni,dtes64,monitor,ds_cpl,est,cid,cx16,xtpr,lahf_lm,model_core= duo'<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US>I need to know if I can use this server to = ovirt-engine<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US><o:p> </o:p></span></p><p class=3DMsoNormal = style=3D'mso-margin-top-alt:auto;margin-bottom:12.0pt'><span lang=3DES = style=3D'font-size:10.0pt;font-family:"Verdana","sans-serif";color:#40404= 0;mso-fareast-language:ES-CL'>Saludos cordiales,<br>Hans Hinrichsen = Hills<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DES><o:p> </o:p></span></p></div></body></html> ------=_NextPart_000_01B8_01CF3F9E.DF1742E0--

2 1

[Users] Ovirt 3.4rc + Qemu Live snapshot : Problem to delete a Snapshot
by Eric Bollengier 16 Mar '14

16 Mar '14

Hello, I upgraded to Ovirt 3.4rc allinone on centos6, and I compiled/installed the qemu-kvm-rhev to be able to take live snapshots. Taking the snapshot is OK, but I would like to delete them, and the button and the menu are disabled (grey) until I shutdown the VM. Once powered off, actions are available, and I'm able to delete snapshots. When looking the Snapshot Actions Matrix: http://www.ovirt.org/Live_Snapshots Is the "Revert" operation needed to delete a snapshot ? (Deleting a snapshot file implies to write changes from the snapshot file to the parent file, looks to be "Commit" for me). If not, should I have to upgrade something else, like libvirt, to be able to delete snapshots? Thanks in advance Best Regards, Eric ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-0.13.rc.el6.noarch ovirt-iso-uploader-3.4.0-1.el6.noarch ovirt-engine-tools-3.4.0-0.13.rc.el6.noarch ovirt-engine-backend-3.4.0-0.13.rc.el6.noarch ovirt-host-deploy-1.1.3-1.el6.noarch ovirt-host-deploy-java-1.1.3-1.el6.noarch ovirt-engine-cli-3.3.0.6-1.el6.noarch ovirt-host-deploy-offline-1.1.3-1.el6.noarch ovirt-engine-setup-base-3.4.0-0.13.rc.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-3.4.0-0.13.rc.el6.noarch ovirt-engine-setup-plugin-allinone-3.4.0-0.13.rc.el6.noarch ovirt-log-collector-3.4.1-1.el6.noarch ovirt-engine-setup-plugin-websocket-proxy-3.4.0-0.13.rc.el6.noarch ovirt-engine-webadmin-portal-3.4.0-0.13.rc.el6.noarch ovirt-engine-userportal-3.4.0-0.13.rc.el6.noarch ovirt-engine-dbscripts-3.4.0-0.13.rc.el6.noarch ovirt-engine-3.4.0-0.13.rc.el6.noarch ovirt-engine-lib-3.4.0-0.13.rc.el6.noarch ovirt-engine-setup-3.4.0-0.13.rc.el6.noarch ovirt-image-uploader-3.4.0-1.el6.noarch ovirt-engine-websocket-proxy-3.4.0-0.13.rc.el6.noarch ovirt-engine-restapi-3.4.0-0.13.rc.el6.noarch ovirt-release-11.0.2-1.noarch vdsm-4.13.3-4.el6.x86_64 qemu-img-rhev-0.12.1.2-2.415.el6.5.x86_64 qemu-kvm-rhev-0.12.1.2-2.415.el6.5.x86_64 qemu-kvm-rhev-tools-0.12.1.2-2.415.el6.5.x86_64 libvirt-0.10.2-29.el6_5.5.x86_64 libvirt-lock-sanlock-0.10.2-29.el6_5.5.x86_64

3 4

[Users] Source code unerstanding
by aditya mamidwar 16 Mar '14

16 Mar '14

Hey, is there a simpler way to know which code is responsible for which module of the engine. is there a documentation maintained. or how can identify the files which are important for me. -- -Aditya Mamidwar

4 3

[Users] otopi.conf
by jacek burghardt 15 Mar '14

15 Mar '14

Is there example on how to create otopi.conf file * see option *OTOPI_PYTHON [/usr/bin/python] i guess I could point it to python2 I hope I can get disable the attempt at installing rpm packages by yum. I dont believe Gentoo had patched otopi to install its packages. ts between attempted installs of ncurses-base-5.7-3.20090208.el6.x86_64 and ncurses-base-5.7-3.20090208.el6.x86_64 file /usr/share/terminfo/d/dumb conflicts between attempted installs of ncurses-base-5.7-3.20090208.el6.x86_64 and ncurses-base-5.7-3.20090208.el6.x86_64 file /usr/share/terminfo/l/linux conflicts between attempted installs of ncurses-base-5.7-3.20090208.el6.x86_64 and ncurses-base-5.7-3.20090208.el6.x86_64 file /usr/share/terminfo/v/vt100 conflicts between attempted installs of ncurses-base-5.7-3.20090208.el6.x86_64 and ncurses-base-5

2 3

[Users] oVirt/RHEV Android client (Opaque) available for beta testing
by i iordanov 15 Mar '14

15 Mar '14

Hello, We invite any interested oVirt/RHEV developers and administrators to beta-test Opaque, a new Android oVirt/RHEV client application. To opt in, please reply to this message with an email address associated with a Google Account, because joining the beta-test group is based on membership to a Google Plus community. If you don't want that email address posted to the mailing list, don't include it in your reply! Itamar or I will add you to the community and let you know that you can proceed to the following two steps: 1) Please visit this page here to accept the invitation: https://plus.google.com/communities/116099119712127782216 2) Once you've become a member of the Google+ group, to opt-in, visit: https://play.google.com/apps/testing/com.undatech.opaquebeta You will be able to download Opaque from Google Play by following the link at the bottom of the opt-in page. Please share your experiences with Opaque to the mailing list! Cheers, iordan -- The conscious mind has only one thread of execution.

8 21