- Users - oVirt List Archives

vnc certificate renew
by csabany＠freemail.hu 09 May '22

09 May '22

Hi, LAst month a renewed our hosts certificates by the "Enroll certificates" method. The "/etc/pki/vdsm/libvirt-vnc/server-cert.pem" certificate wasn't renewed on my nodes (other certificates were). How can i renew this certificate too? thanks csabany

6 8

Backing up VMs with qemu-img
by David White 08 May '22

08 May '22

I've recently been working with the qemu-img commands for some work that has nothing to do with oVirt or anything inside an oVirt environment. But learning and using these commands have given me an idea for automating backups. I believe that the following is true, but to confirm, would the qemu-img commands be available on the oVirt hosts to take VM snapshots and disk images? Sent with ProtonMail secure email.

3 3

OVIRT Engine Restore from old Backup
by Abe E 07 May '22

07 May '22

Hey All, I really dont like spamming the forums but the issues I am having keep changing entirely. I am at the point where I can get much closer to rebuilding my engine although my hurtle currently is restoring. When I restore using my most recent backup it is problematic Currently I am restoring by: clean engine install engine-cleanup engine-backup --mode=restore --file=ovirt-engine-backup-20220504011012.backup --log=restore5.log engine-setup Comes up with alot of annoyances as the ID of the old hosted_storage and the new one are mismatched in the GUI. On top of that it is not allowing me to deploy the engine to the 2nd Gluster (3rd one keeps deleting its glusters on reboot since 4.3 Upgrade). Host 1 which runs the hosted engine is not showing as active or unlike, rather it is unresponsive, when I tried to enroll certificates it finally accepted but failed because it said its missing networks, once added it crashed the engine and ha agent wouldnt come up. Now that I think of it, I could have removed the extra networks from being required although it still doesnt benefit me here as I am unable to deploy or reinstall the 2nd Gluster node and the first one will not show its correct state as the host. Should I just be deploying the DB, or is the full file backup fine? My issue here is it takes long to redeploy so the trial an error of failing takes me hours as my backup is from 4.5 engine even though my nodes are on 4.4 as 4.5 keeps causing the catastrophic failure of my whole cluster.

2 1

ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[XML error]". HTTP response code is 400.
by yp414＠163.com 07 May '22

07 May '22

[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the storage interface to be up] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster ID] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter ID] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster version] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce cluster major version] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce cluster minor version] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set storage_format] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add NFS storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add glusterfs storage domain] [ ERROR ] ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[XML error]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[XML error]\". HTTP response code is 400."}

2 1

Re: Ovirt engine Isuue
by Jonas Liechti 06 May '22

06 May '22

Try downgrading postgresql-jdbc (https://lists.ovirt.org/archives/list/users@ovirt.org/message/N6MNSV4ZK26V5…) dnf downgrade postgresql-jdbc systemctl restart ovirt-engine Am 05.05.2022 08:18 schrieb sachendra.shukla(a)yagnaiq.com: > > We have installed ovirt engine on centos 8 by follow the below commond > > nano /etc/hosts > your-server-ip centos.example.com > dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm > dnf module enable javapackages-tools -y > dnf module enable pki-deps -y > dnf module enable postgresql:12 -y > dnf update -y > dnf install ovirt-engine -y > engine-setup (when we require latest version > setsebool -P httpd_can_network_connect 1 > firewall-cmd --permanent --zone public --add-port 80/tcp > firewall-cmd --permanent --zone public --add-port 443/tcp > firewall-cmd --reload > > > But we are unable to connect by browser shwing below error. > > 500 - Internal Server Error > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/N7FTY5ZY6SWJH…

3 4

Re: ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[XML error]". HTTP response code is 400.
by Jonas Liechti 06 May '22

06 May '22

I had the same problem and found the solution here: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6IKZ45B2TUCQB… Find cli.py on the host and comment out the line with `value ['stripeCount'] = el.find('stripeCount').text` Am 06.05.2022 19:01 schrieb yp414(a)163.com: > > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the storage interface to be up] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check local VM dir stat] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce local VM dir existence] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch host facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster ID] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter ID] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter name] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster name] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster version] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce cluster major version] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce cluster minor version] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set storage_format] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add NFS storage domain] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add glusterfs storage domain] > [ ERROR ] ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[XML error]". HTTP response code is 400. > [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[XML error]\". HTTP response code is 400."} > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XN3H2YZZ56K7P…

1 0

i need change legacy to ovs switch mode on oVirt node's
by sultanu＠inbox.ru 06 May '22

06 May '22

Hello, Team! I need help. I have cluster with 3 nodes oVirt 4.4.10 and common ISCSI storage, i have hosted engine installed on it. I wont change legacy to ovs switch mode, using instruction below: - Install first host and VM using "hosted-engine --deploy" - In the Engine UI, change Cluster switch type from Legacy to OVS - Shutdown the engine VM and stop vdsmd on the host. - Manually change the switch type to ovs in /var/lib/vdsm/persistence/netconf/nets/ovirtmgmt - Restart the host After this changing my hosted engine don't wont start, it says i have a problem with vnet interface, i don't know virtmanager or i don't know vnetuser. When i had return back settings from ovs to legacy mode, hosted engine start without any problem When i had change file /var/lib/vdsm/persistence/netconf/nets/ovirtmgmt on hosts without hosted engine, they are change network mode and start working as ovs switch mode but they say network out of sync. I tryed to migrate hosted engine from host with legacy switch to host with ovs switch hosted engine don't wont migrate. Could you help me please.

2 1

could not start ovirt-engine: TagsDirector.init() fails
by Liebe, André-Sebastian 06 May '22

06 May '22

Hello list, I'm unable to start ovirt-engine after switching from CentOS 8 to CentOS 8-stream, doing a system update and a reboot. A previously done ovirt update from 4.4.9 to 4.4.10 (w/o system reboot but with service restart) went smoothly, so I guess it's somehow caused by one oft he centOS updates? The root cause logged in server.log reads: > org.springframework.dao.InvalidDataAccessApiUsageException: Unable to determine the correct call signature - no procedure/function/signature for 'gettagsbyparent_id' But according to ovirt-engine-setup-*.log a GettagsByparent_id(v_parent_id UUID) function ist created duging engine-setup (which I run after dnf update). When searching google for " org.ovirt.engine.core.bll.TagsDirector.init()" and "'gettagsbyparent_id" I got some results hinting for a faulty PosgreSQL jdbc driver from 2018 Any hints? sincerely André-Sebastian Liebe Zukunftslabor gematik GmbH | Friedrichstr. 136 | 10117 Berlin Tel +49 30 40041-197 | Fax +49 30 40041-111 andre.liebe(a)gematik.de | www.gematik.de Amtsgericht Charlottenburg HRB 96351 Geschäftsführer: Dr. med Markus Leyck Dieken

2 1

Ovirt engine Isuue
by sachendra.shukla＠yagnaiq.com 06 May '22

06 May '22

We have installed ovirt engine on centos 8 by follow the below commond nano /etc/hosts your-server-ip centos.example.com dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm dnf module enable javapackages-tools -y dnf module enable pki-deps -y dnf module enable postgresql:12 -y dnf update -y dnf install ovirt-engine -y engine-setup (when we require latest version setsebool -P httpd_can_network_connect 1 firewall-cmd --permanent --zone public --add-port 80/tcp firewall-cmd --permanent --zone public --add-port 443/tcp firewall-cmd --reload But we are unable to connect by browser shwing below error. 500 - Internal Server Error

3 3

Re: Getting error on oVirt installation
by Kevin Cahill 06 May '22

06 May '22

I am also struggling with this as I try to install a self-hosted engine. I have read every thread in the forum and tried all the suggestions. Here is my most recent attempt (RHEL 8.5, installing oVirt 4.4): Start the hosted engine deployment, then run the command [ # dnf downgrade postgresql-jdbc ] from a virsh console, to downgrade postgresql as soon as the packages are done updating. The downgrade appears to be successful, however the system still fails at 'Check if engine health page is up'. Restarting the oVirt engine [ # systemctl restart oVirt-engine ] immediately after downgrading postgresql does not make any difference. The system times out at the 'Check if engine health page is up'. The log entry where the latest failure started to occur is below. I can include the entire log if needed. Interestingly, the status was 503 this time. In many prior attempts that status was 500. 2022-05-06 09:42:49,744-0400 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:110 fatal: [localhost -> 192.168.222.150]: FAILED! => {"attempts": 30, "changed": false, "connection": "close", "content": "<!DOCTYPE HTML PUBLIC \"-//IETF//DTD HTML 2.0//EN\">\n<html><head>\n<title>503 Service Unavailable</title>\n</head><body>\n<h1>Service Unavailable</h1>\n<p>The server is temporarily unable to service your\nrequest due to maintenance downtime or capacity\nproblems. Please try again later.</p>\n</body></html>\n", "content_length": "299", "content_type": "text/html; charset=iso-8859-1", "date": "Fri, 06 May 2022 13:42:49 GMT", "elapsed": 0, "msg": "Status code was 503 and not [200]: HTTP Error 503: Service Unavailable", "redirected": false, "server": "Apache/2.4.37 (centos) OpenSSL/1.1.1k mod_auth_gssapi/1.6.1 mod_wsgi/4.6.4 Python/3.6", "status": 503, "url": http://localhost/ovirt-engine/services/health} I would like to know if anyone has had success doing a fresh install of a self-hosted environment since the postgresql issue arose. If so, any pointers would be greatly appreciated. If I get this working I will follow up with exactly what I did.

1 0

Set password for VM
by vysikantsev＠gmail.com 06 May '22

06 May '22

How to set password for Virtual machine?

2 1

HELP ME! Failed to validate the SSL certificate for localhost:443
by natchawi28＠gmail.com 06 May '22

06 May '22

Hi, I'm having an issue with Failed to validate the SSL certificate for localhost:443 during Deploy "hosted-engine." check the log files, found this error: " [TASK] [ovirt.engine-setup: Check if Engine health page is up] [ERROR] fatal:[localhost -> my_fqdn.domain]:FAILED!=>{"attempts":12, "changed":false,"msg":"Failed to validate the SSL certificate for localhost:443. Make sure your managed systems have a valid CA certificate installed. You can use validate_certs=False if you do not need to confirm the servers identity but this is unsafe and not recommended. Paths checked for this patform: /etc/ssl/certs, /etc/pki/ca-trust/extracted/pem, /etc/pki/tls/certs, /usr/share/ca-certificates/cacert.org, /etc/ansible. The exception msg was: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:618).", "status": -1, "url": "http://localhost/ovirt-engine/services/health"} " NOTE: ovirt engine VERSION "ovirt-engine-appliance-4.3-20200603.1.0.2.el7.x86_64" We tried googling to resolve this issue but, unfortunately, unsuccessfully. Can someone help us to solve our critical issue? Best regards, Bunnatee

4 10

Getting error on oVirt installation
by mahmutduzenn＠gmail.com 06 May '22

06 May '22

Hello, I downloaded the oVirt node and installed it on my server. DNS etc. I made the settings. I'm getting an error in the Hosted engine installation step. The error message I got is as follows: [ INFO ] TASK [ovirt.ovirt.engine_setup : Run engine-config] [ INFO ] TASK [ovirt.ovirt.engine_setup : Restart engine after engine-config] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Check if Engine health page is up] [ ERROR ] fatal: [localhost -> 192.168.2.94]: FAILED! => {"attempts": 30, "changed": false, "connection": "close", "content_encoding": "identity", "content_length": "86", "content_type": "text/html; charset= UTF-8", "date": "Fri, 29 Apr 2022 02:52:21 GMT", "elapsed": 0, "msg": "Status code was 500 and not [200]: HTTP Error 500: Internal Server Error", "redirected": false, "server": "Apache/2.4.37 (centos) OpenSSL/1.1.1k mod_auth_gssapi/1.6.1", "status": 500, "url": "http://localhost /ovirt-engine/services/health"} [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files] [ INFO ] changed: [localhost -> 192.168.2.94] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Sync on engine machine] [ INFO ] changed: [localhost -> 192.168.2.94] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Change ownership of copied engine logs] [ INFO ] changed: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "There was a failure deploying the engine on the local engine VM. The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} How can I fix this. thanks

5 8

Lockspace volume not recognized after NFS outage
by joustie＠gmail.com 06 May '22

06 May '22

Hi, I am running a 3 node Ovirt cluster with a hosted-engine. Unfortunately I had a small issue on my NFS server which provides the shared storage for the cluster. During the outage, all VM's went into pause, and the cluster itself (hosted engine) went down. After restoring nfs service (took 2 minutes), the cluster did not recover. The HA agent can't make sense of the lockspace anymore it seems. The agent fails on all nodes. There are several errors in logs but the main one is (I think) in broker.log: MainThread::WARNING::2022-05-01 22:06:06,085::storage_broker::97::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(__init__) Can't connect vdsm storage: Command Image.prepare with args {'imageID': 'c1b7e131-bbde-416b-b2a0-de746a039dfd', 'storagepoolID': '00000000-0000-0000-0000-000000000000', 'volumeID': 'b221ea37-2c59-49bf-89f7-83766fb53717', 'storagedomainID': 'e3b467ec-fdfc-4c7a-9725-8a6d1fe18c6d'} failed: (code=201, message=Volume does not exist: (u'b221ea37-2c59-49bf-89f7-83766fb53717',)) Which is weird because it seems to exist: ls -l /rhev/data-center/mnt/nas.fritz.box:_mnt_HD_HD__a2_hosted__engine__nas/e3b467ec-fdfc-4c7a-9725-8a6d1fe18c6d/images/c1b7e131-bbde-416b-b2a0-de746a039dfd total 1049608 -rw-rw----. 1 vdsm kvm 1073741824 May 1 15:35 b221ea37-2c59-49bf-89f7-83766fb53717 -rw-rw----. 1 vdsm kvm 1048576 Dec 21 2020 b221ea37-2c59-49bf-89f7-83766fb53717.lease -rw-rw-rw-. 1 vdsm kvm 329 Dec 21 2020 b221ea37-2c59-49bf-89f7-83766fb53717.meta When I try to reinitialize the lockspace (stopping the agent etc) I get: ---- File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/unixrpc.py", line 60, in connect self.sock.connect(base64.b16decode(self.host)) File "/usr/lib64/python2.7/socket.py", line 224, in meth return getattr(self._sock,name)(*args) socket.error: [Errno 2] No such file or directory Is there a way to to this manually and also recreate the lockspace volume? I already tried to recreate the lockspace manually with: sanlock direct init -s hosted-engine:0:/rhev/data-center/mnt/nas.fritz.box:_mnt_HD_HD__a2_hosted__engine__nas/e3b467ec-fdfc-4c7a-9725-8a6d1fe18c6d/ha_agent/hosted-engine.lockspace:0 which resulted in: init done -19 No further info and nothing changed. With kind regards, Joost

2 1

OVS switch type for hosted-engine
by Devin A. Bougie 06 May '22

06 May '22

Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated. Many thanks, Devin

4 5

Re: could not start ovirt-engine: TagsDirector.init() fails
by Liebe, André-Sebastian 06 May '22

06 May '22

Donwngrading postgresql-jdbc from 42.2.14-1.el8 to 42.2.3-3.el8_2 (hint from failing ovirt 4.5 deployment https://lists.ovirt.org/archives/list/users@ovirt.org/thread/FA6BLIAIYY7GOX…) did the trick. > dnf downgrade postgresql-jdbc > systemctl restart ovirt-engine sincerely André-Sebastian Liebe Zukunftslabor gematik GmbH | Friedrichstr. 136 | 10117 Berlin Tel +49 30 40041-197 | Fax +49 30 40041-111 andre.liebe(a)gematik.de | www.gematik.de Amtsgericht Charlottenburg HRB 96351 Geschäftsführer: Dr. med Markus Leyck Dieken -----Ursprüngliche Nachricht----- Von: Liebe, André-Sebastian Gesendet: Freitag, 6. Mai 2022 07:46 An: users(a)ovirt.org Betreff: could not start ovirt-engine: TagsDirector.init() fails Hello list, I'm unable to start ovirt-engine after switching from CentOS 8 to CentOS 8-stream, doing a system update and a reboot. A previously done ovirt update from 4.4.9 to 4.4.10 (w/o system reboot but with service restart) went smoothly, so I guess it's somehow caused by one oft he centOS updates? The root cause logged in server.log reads: > org.springframework.dao.InvalidDataAccessApiUsageException: Unable to determine the correct call signature - no procedure/function/signature for 'gettagsbyparent_id' But according to ovirt-engine-setup-*.log a GettagsByparent_id(v_parent_id UUID) function ist created duging engine-setup (which I run after dnf update). When searching google for " org.ovirt.engine.core.bll.TagsDirector.init()" and "'gettagsbyparent_id" I got some results hinting for a faulty PosgreSQL jdbc driver from 2018 Any hints? sincerely André-Sebastian Liebe Zukunftslabor gematik GmbH | Friedrichstr. 136 | 10117 Berlin Tel +49 30 40041-197 | Fax +49 30 40041-111 andre.liebe(a)gematik.de | www.gematik.de Amtsgericht Charlottenburg HRB 96351 Geschäftsführer: Dr. med Markus Leyck Dieken

1 0

Virt group has no storage.owner-uid/gid anymore
by Strahil Nikolov 06 May '22

06 May '22

Hi All, is there any reason why the virt group is no longer having the storage.owner-uid & storage.owner-gid set to 36 ?I've opened an issue to track the reasons/bugfix at https://github.com/gluster/glusterfs/issues/3503 Best Regards,Strahil Nikolov

1 0

Re: [IMPORTANT] Upgrade to postgresql-jdbc-42.2.14-1 breaks oVirt Engine 4.4/4.5
by laj811＠gmail.com 05 May '22

05 May '22

I'm surprised this hasn't been fixed yet. This bug causes the engine setup on new node 4.5 installs to fail. Had I not found this post, I wouldn't have figured out what was going on during the engine setup process. This really needs to be fixed. -Lucas

1 0

ovirt engine restore: Failed to construct component instance
by Rafhael Almeida 05 May '22

05 May '22

Please your help, I restore a engine db correctly in a Fresh Installation on my same server: engine-backup --mode=restore --file=ovirt.2022-04-29_12h00.tar.gz --log=ovirt_log.2022-04-29_12h00.out --restore-permissions --provision-all-databases after engine-setup (I dont' see any warning o error, everything is correct) but when try to accces in my private domain, to access to ovirt-engine, don't work, I see in the files: /etc/ovirt-engine/engine.conf.d/10-setup-cinderlib-database.conf /etc/ovirt-engine/engine.conf.d/10-setup-database.conf /etc/ovirt-engine/engine.conf.d/10-setup-dwh-database.conf another password, in my last engine db, I have another passw to connect to db when i restart the service systemctl restart ovirt-engine y see this logs: *------------my server.log ----------------* Service status report WFLYCTL0186: Services which failed to start: service jboss.deployment.subunit."engine.ear"."bll.jar".component.Backend.START: java.lang.IllegalStateException: WFLYEE0042: Failed to construct component instance WFLYCTL0448: 2 additional services are down due to their dependencies being missing or failed 2022-05-04 16:09:25,234-05 INFO [org.jboss.as.server] (Controller Boot Thread) WFLYSRV0212: Resuming server 2022-05-04 16:09:25,238-05 ERROR [org.jboss.as] (Controller Boot Thread) WFLYSRV0026: WildFly Full 23.0.2.Final (WildFly Core 15.0.1.Final) started (with errors) in 15182ms - Started 1668 of 1888 services (6 services failed or missing dependencies, 393 services are lazy, passive or on-demand) 2022-05-04 16:09:25,240-05 INFO [org.jboss.as] (Controller Boot Thread) WFLYSRV0060: Http management interface listening on http://127.0.0.1:8706/management 2022-05-04 16:09:25,241-05 INFO [org.jboss.as] (Controller Boot Thread) WFLYSRV0051: Admin console listening on http://127.0.0.1:8706 *--------------------------------------------------* pd. my logs: https://filedn.com/lYVRQ0f0QUTQVmMCo3Bk7DY/server.log my ideas ran out, Please your help !!

2 2

Re: Ovirt 4.5.0.1 self-hosted deployment fails - jboss errors
by hans＠jiflin.nl 05 May '22

05 May '22

Hi, did you resolve this? I am trying to setup a new environment also and can't get past the errors anymore... > Hello, > > I’m trying to deploy a self-hosted engine on Ovirt node v4.5.0.1, but the deployment fails > in the final stages with the following errors in “Server.log” file. > > > I hope that you have an Idea about that. I ran the installer 3 times (cockpit installer. > > Thank you,

2 1

Async release for ovirt-engine (4.5.0.6) is now available
by Lev Veyde 04 May '22

04 May '22

The oVirt Team has just released a new version of ovirt-engine package (4.5.0.6) that fixes a few important bugs: - Bug 2055136 <https://bugzilla.redhat.com/2055136> - virt module is not changed to the correct stream during host upgrade - Bug 2074112 <https://bugzilla.redhat.com/2074112> - VM does not have a disk after restored from backup - Bug 2076465 <https://bugzilla.redhat.com/2076465> - OVA import: importing OVA of Q35/UEFI VM failed with 'Duplicate key nvram' The update is already available on resources.ovirt.org and should land on oVirt mirrors within 24 hours. -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Rebuilding Gluster Storage through GUI?
by Abe E 04 May '22

04 May '22

Is it possible to reconfigure my broken arbiter gluster from the GUI? Something broke it all in my 4.4 to 4.5 Upgrade after reboot and I just don't have the time to keep TSing through it versus attempting to rebuild it. Has anyone ever tried re-installing the node itself and using the ovirt gui to run in theory a single gluster install to add it to the main DC? This would save alot of configs through the CLI for rebuiling the bricks for this node.

2 3

Re: Self-hosted engine 4.5.0 deployment fails
by diego.ercolani＠ssis.sm 04 May '22

04 May '22

Please follow the instruction here: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/N6MNSV4ZK26V5N…

1 0

Unable to remove host from ovirt engine
by Joseph Gelinas 03 May '22

03 May '22

Recently our host and ovirt engine certificates expired and with some ideas from Strahil we were able to get 2 of the 3 ovirt hosts updated with usable certificates and move all of our VMs to those two nodes. https://lists.ovirt.org/archives/list/users@ovirt.org/thread/QCFPKQ3OKPOUV2… Not having any luck with the last host we figured we'd just try to remove it from ovirt engine and re-add it. While it seems `hosted-engine --vm-status` on one node no longer shows the removed host, the other good host and the web interface still show ovirt-1 in the mix. What is the best way to remove a NonRespnsive host from ovirt and re-add it? [root@ovirt-1 ~]# hosted-engine --vm-status The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable. [root@ovirt-2 ~]# hosted-engine --vm-status !! Cluster is in GLOBAL MAINTENANCE mode !! --== Host ovirt-3.xxxxx.com (id: 2) status ==-- Host ID : 2 Host timestamp : 12515451 Score : 3274 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : ovirt-3.xxxxx.com Local maintenance : False stopped : False crc32 : 9cf92792 conf_on_shared_storage : True local_conf_timestamp : 12515451 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=12515451 (Mon Apr 25 14:08:51 2022) host-id=2 score=3274 vm_conf_refresh_time=12515451 (Mon Apr 25 14:08:51 2022) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host ovirt-2.xxxxx.com (id: 3) status ==-- Host ID : 3 Host timestamp : 12513269 Score : 3400 Engine status : {"vm": "up", "health": "good", "detail": "Up"} Hostname : ovirt-2.xxxxx.com Local maintenance : False stopped : False crc32 : 4a89d706 conf_on_shared_storage : True local_conf_timestamp : 12513269 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=12513269 (Mon Apr 25 14:09:00 2022) host-id=3 score=3400 vm_conf_refresh_time=12513269 (Mon Apr 25 14:09:00 2022) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False !! Cluster is in GLOBAL MAINTENANCE mode !! [root@ovirt-3 ~]# hosted-engine --vm-status !! Cluster is in GLOBAL MAINTENANCE mode !! --== Host ovirt-1.xxxxx.com (id: 1) status ==-- Host ID : 1 Host timestamp : 6750990 Score : 0 Engine status : unknown stale-data Hostname : ovirt-1.xxxxx.com Local maintenance : False stopped : True crc32 : 5290657b conf_on_shared_storage : True local_conf_timestamp : 6750950 Status up-to-date : False Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=6750990 (Thu Feb 17 22:17:53 2022) host-id=1 score=0 vm_conf_refresh_time=6750950 (Thu Feb 17 22:17:12 2022) conf_on_shared_storage=True maintenance=False state=AgentStopped stopped=True --== Host ovirt-3.xxxxx.com (id: 2) status ==-- Host ID : 2 Host timestamp : 12515501 Score : 3279 Engine status : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : ovirt-3.xxxxx.com Local maintenance : False stopped : False crc32 : 0845cd93 conf_on_shared_storage : True local_conf_timestamp : 12515501 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=12515501 (Mon Apr 25 14:09:42 2022) host-id=2 score=3279 vm_conf_refresh_time=12515501 (Mon Apr 25 14:09:42 2022) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False --== Host ovirt-2.xxxxx.com (id: 3) status ==-- Host ID : 3 Host timestamp : 12513309 Score : 3400 Engine status : {"vm": "up", "health": "good", "detail": "Up"} Hostname : ovirt-2.xxxxx.com Local maintenance : False stopped : False crc32 : 237726e0 conf_on_shared_storage : True local_conf_timestamp : 12513309 Status up-to-date : True Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=12513309 (Mon Apr 25 14:09:39 2022) host-id=3 score=3400 vm_conf_refresh_time=12513309 (Mon Apr 25 14:09:39 2022) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False !! Cluster is in GLOBAL MAINTENANCE mode !!

2 18

Self-hosted engine 4.5.0 deployment fails
by Mohamed Roushdy 03 May '22

03 May '22

Hello, I’m deploying on Ovirt nodes v4.5.0.1, but it fails to deploy the self-hosted engine with the following errors in the web installer: [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.engine_setup : Check if Engine health page is up] [ ERROR ] fatal: [localhost -> 192.168.222.197]: FAILED! => {"attempts": 30, "changed": false, "connection": "close", "content_encoding": "identity", "content_length": "86", "content_type": "text/html; charset=UTF-8", "date": "Tue, 03 May 2022 15:57:20 GMT", "elapsed": 0, "msg": "Status code was 500 and not [200]: HTTP Error 500: Internal Server Error", "redirected": false, "server": "Apache/2.4.37 (centos) OpenSSL/1.1.1k mod_auth_gssapi/1.6.1", "status": 500, "url": http://localhost/ovirt-engine/services/health} [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files] [ INFO ] changed: [localhost -> 192.168.222.197] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Sync on engine machine] [ INFO ] changed: [localhost -> 192.168.222.197] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Change ownership of copied engine logs] [ INFO ] changed: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "There was a failure deploying the engine on the local engine VM. The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} Any idea if this is a bug or something? I tried to deploy for eight times with different configuration Thank y9ou,

1 0