- Users - oVirt List Archives

Re: [Users] networking: basic vlan help
by Juan Pablo Lorier 23 Jan '14

23 Jan '14

Hi Robert, You can use mgmt untagged but if it's a non-vm network. If you tag mgmt network, ovirt will configure a vlan interface and add it to ovirtmgmt, so you'll get a disruption when network gets restarted to take the changes. Regards,

1 0

[Users] [ANN] Second oVirt Node ISO for oVirt 3.4 Test Day
by Fabian Deutsch 23 Jan '14

23 Jan '14

--=-eaF9ykuE4s2HvvcNqwgb Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Hey, we've updated the oVirt Node iso: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.2014= 01231512draft.vdsm.el6.iso This updated contains fixes for this two problems: Bug 1057050 - manual instalation screen freezes at 75% Bug 1057064 - ovirt-node cannot be added as a host from TUI Additional that iso should raise less SELinux denials and can possibly without appending enforcing=3D0. As always: feedback is always appreciated. - fabian --=-eaF9ykuE4s2HvvcNqwgb Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part Content-Transfer-Encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQIbBAABAgAGBQJS4UCXAAoJEC9+uOgSHVGUV+UP9RhaTo0QPAxOmRTdphlWM5LW tF/arh9YS0OWxtRU6xyr5H/anvtVtaMXaV717ngzdURhjafsHAl369y6XmwpMnT5 NLOT5lE4v7sK1kuo0BJBdAvvGZtMydQZ+A6+ri9Z7S12Q2XX3Aw0/GZYk14VpYlO vS1e/mzLqQ1cNcFJvblMtyZENcxXhUBcv3TFZxOgJv4AtVlSQlWU360/an6d2sO6 q4kacmlR5OvIH9eYGUEqfjUfQmP5EFNB74Hf9xQujHP7WJqpRJUC7Mh73NW0aDt+ jJ9Y/9+3lhZd/wQ7lmv5Rlu0NhtFJPa4rQBuTCKxUlBWGa+u0ufdd1xnHmisKNbn feS2dep3xdk+oq/hCArzYQEaMea58F2Vm7zHePGndG/r/cMCDYmonfX15w5C9tHT pFxR3zcM0yZRX31NmCHT3zuKj3FQ7YRr8Z0ZeMJ9wUjWmDxH6/uIkA5KrNK3oNcP yjyGjtovJCyzcq5qN4yElyechpQbvvrkyuSuFedT1hgwrIg/1clzk3ufhQa7iYAN Oax9a+Buxx9mbL7hagWolO+5rKs/JATE/LfvM4ZLDiboUGkxhD5ACjgsWS2nS6xJ 0WLkGEhst4mj5j/w/gANgxjUY6VB+/rweuHx2IbA2eG+SyoqteTTwJzFM6fWArk/ sdt2GNdzd4aGG7p2s+w= =b0E9 -----END PGP SIGNATURE----- --=-eaF9ykuE4s2HvvcNqwgb--

1 0

[Users] SELinux persistent changes on ovirt node
by Francisco Pérez 23 Jan '14

23 Jan '14

Hi. I have a question regarding to the ovirt node. Im trying to disable o set selinux in permissive mode..I have modified /etc/sysconfig/selinux and then use the persist command on it but sestats output shows the following: [root@ovirth1 ~]# sestatus SELinux status: enabled SELinuxfs mount: /selinux Current mode: enforcing Mode from config file: permissive Policy version: 24 Policy from config file: targeted I have found that this also can be acomplished by modifying kernel's boot parameters So it's looks like kernel's boot parameter enforce=1 overrides /etc/sysconfig/selinux. Where is the config file to set enforce=0? Can't find grub config on the node. Best regards Francisco

2 1

[Users] Conflicts during enigne install
by Piotr Kliczewski 23 Jan '14

23 Jan '14

As part of test day I wanted to install engine 3.4.0-0.5.beta1.fc20 from ovirt-3.4.0-prerelease and I can see following info: Transaction check error: file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.py conflicts between attempted installs of ovirt-log-collector-3.4.0-0.1.beta1.fc20.noarch and sos-3.0-3.fc20.noarch file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.pyc conflicts between attempted installs of ovirt-log-collector-3.4.0-0.1.beta1.fc20.noarch and sos-3.0-3.fc20.noarch file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.pyo conflicts between attempted installs of ovirt-log-collector-3.4.0-0.1.beta1.fc20.noarch and sos-3.0-3.fc20.noarc Thanks, Piotr

2 1

[Users] ovirt 3.4 beta on F19: engine-setup error "Failed to execute stage 'Misc configuration': Command '/bin/systemctl' failed to execute"
by Jorick Astrego 23 Jan '14

23 Jan '14

Hi, Installing a fresh fedora 19 minimal install and ovirt 3.4 beta got me stuck again. Maybe we should do a bit more QA before releasing a beta? --== CONFIGURATION PREVIEW ==-- Engine database name : engine Engine database secured connection : False Engine database host : localhost Engine database user name : engine Engine database host name validation : False Engine database port : 5432 NFS setup : True PKI organization : xxxxx.xxx Application mode : both Firewall manager : firewalld Update Firewall : True Configure WebSocket Proxy : True Host FQDN : xxxx.xxxxx.xxxxx NFS export ACL : 0.0.0.0/0.0.0.0(rw) NFS mount point : /var/lib/exports/iso Datacenter storage type : posixfs Configure local Engine database : True Set application as default page : True Configure Apache SSL : True Please confirm installation settings (OK, Cancel) [OK]: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ ERROR ] Failed to execute stage 'Misc configuration': Command '/bin/systemctl' failed to execute [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20140123145115.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed 2014-01-23 14:52:35 DEBUG otopi.plugins.otopi.services.systemd systemd.state:134 starting service postgresql 2014-01-23 14:52:35 DEBUG otopi.plugins.otopi.services.systemd plugin.executeRaw:366 execute: ('/bin/systemctl', 'start', 'postgresql.service'), executable='None', cwd='None', env=None 2014-01-23 14:52:40 DEBUG otopi.plugins.otopi.services.systemd plugin.executeRaw:383 execute-result: ('/bin/systemctl', 'start', 'postgresql.service'), rc=1 2014-01-23 14:52:40 DEBUG otopi.plugins.otopi.services.systemd plugin.execute:441 execute-output: ('/bin/systemctl', 'start', 'postgresql.service') stdout: 2014-01-23 14:52:40 DEBUG otopi.plugins.otopi.services.systemd plugin.execute:446 execute-output: ('/bin/systemctl', 'start', 'postgresql.service') stderr: Job for postgresql.service failed. See 'systemctl status postgresql.service' and 'journalctl -xn' for details. 2014-01-23 14:52:40 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/provisioning/postgres.py", line 182, in _misc self._provisioning.provision() File "/usr/share/ovirt-engine/setup/ovirt_engine_setup/postgres.py", line 552, in provision self._restart() File "/usr/share/ovirt-engine/setup/ovirt_engine_setup/postgres.py", line 407, in _restart state=state, File "/usr/share/otopi/plugins/otopi/services/systemd.py", line 138, in state 'start' if state else 'stop' File "/usr/share/otopi/plugins/otopi/services/systemd.py", line 77, in _executeServiceCommand raiseOnError=raiseOnError File "/usr/lib/python2.7/site-packages/otopi/plugin.py", line 451, in execute command=args[0], RuntimeError: Command '/bin/systemctl' failed to execute 2014-01-23 14:52:40 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': Command '/bin/systemctl' failed to execute 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'Yum Transaction' 2014-01-23 14:52:40 INFO otopi.plugins.otopi.packagers.yumpackager yumpackager.info:92 Yum Performing yum transaction rollback Loaded plugins: langpacks, refresh-packagekit, versionlock 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'Database Transaction' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'Version Lock Transaction' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'Firewalld Transaction' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/sysctl.d/ovirt-engine.conf'' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/firewalld/services/ovirt-postgres.xml'' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/firewalld/services/ovirt-https.xml'' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/firewalld/services/ovirt-websocket-proxy.xml'' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/firewalld/services/ovirt-nfs.xml'' 2014-01-23 14:52:40 DEBUG otopi.transaction transaction.abort:131 aborting 'File transaction for '/etc/firewalld/services/ovirt-http.xml'' 2014-01-23 14:52:40 DEBUG otopi.context context.dumpEnvironment:456 ENVIRONMENT DUMP - BEGIN 2014-01-23 14:52:40 DEBUG otopi.context context.dumpEnvironment:471 ENV BASE/error=bool:'True' 2014-01-23 14:52:40 DEBUG otopi.context context.dumpEnvironment:473 ENVIRONMENT DUMP - END 2014-01-23 14:52:40 INFO otopi.context context.runSequence:395 Stage: Clean up 2014-01-23 14:52:40 DEBUG otopi.context context.runSequence:399 STAGE cleanup Kind regards, Jorick Astrego Netbulae B.V.

4 4

[Users] oVirt 3.4.0 beta - Hosted Engine Setup -- issues
by Brad House 23 Jan '14

23 Jan '14

I'm trying to test out the oVirt Hosted Engine, but am experiencing a failure early on and was hoping someone could point me in the right direction. I'm not familiar enough with the architecture of oVirt to start to debug this situation. Basically, I run the "hosted-engine --deploy" command and it outputs: ======================== [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log Version: otopi-1.2.0_beta (otopi-1.2.0-0.1.beta.fc19) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- During customization use CTRL-D to abort. [ ERROR ] Failed to execute stage 'Environment customization': [Errno 111] Connection refused [ INFO ] Stage: Clean up [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination ======================== /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log has: ======================== 2014-01-22 11:07:57 DEBUG otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._check_existing_pools:631 getConnectedStoragePoolsList 2014-01-22 11:07:57 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", line 729, in _customization self._check_existing_pools() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", line 632, in _check_existing_pools pools = self.serv.s.getConnectedStoragePoolsList() File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__ return self.__send(self.__name, args) File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request verbose=self.__verbose File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request return self.single_request(host, handler, request_body, verbose) File "/usr/lib64/python2.7/xmlrpclib.py", line 1292, in single_request self.send_content(h, request_body) File "/usr/lib64/python2.7/xmlrpclib.py", line 1439, in send_content connection.endheaders(request_body) File "/usr/lib64/python2.7/httplib.py", line 969, in endheaders self._send_output(message_body) File "/usr/lib64/python2.7/httplib.py", line 829, in _send_output self.send(msg) File "/usr/lib64/python2.7/httplib.py", line 791, in send self.connect() File "/usr/lib64/python2.7/site-packages/vdsm/SecureXMLRPCServer.py", line 188, in connect sock = socket.create_connection((self.host, self.port), self.timeout) File "/usr/lib64/python2.7/socket.py", line 571, in create_connection raise err error: [Errno 111] Connection refused 2014-01-22 11:07:57 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Environment customization': [Errno 111] Connection refused ======================== Unfortunately I do not know what service this is trying to connect to, or what hostname or port to try to start debugging that. Some other useful information about my environment: - Fedora 19 (64bit), minimal install, selected 'standard' add-on utilities. This was a fresh install just for this test. - 512MB /boot ext4 - 80GB / ext4 in LVM, 220GB free in VG - "yum -y update" performed to get all latest updates - SElinux in permissive mode - Hardware: - Supermicro 1026T-URF barebones - single CPU populated (Xeon E5630 4x2.53GHz) - 12GB ECC DDR3 RAM - H/W Raid with SSDs - Networking: - Network Manager DISABLED - 4 GbE ports (p2p1, p2p2, em1, em2) - all 4 ports configured in a bond (bond0) using balance-alb - ovirtmgmt bridge pre-created with 'bond0' as the only member, assigned a static IP address - firewall DISABLED - /etc/yum.repos.d/ovirt.rep has ONLY the 3.4.0 beta repo enabled: [ovirt-3.4.0-beta] name=3.4.0 beta testing repo for the oVirt project baseurl=http://ovirt.org/releases/3.4.0-beta/rpm/Fedora/$releasever/ enabled=1 skip_if_unavailable=1 gpgcheck=0 - only other packages installed were "ntp" and "screen" - performed "yum install ovirt-hosted-engine-setup" then "screen" then "hosted-engine --deploy" Any guidance or things to test would be _greatly_ appreciated. Thanks! -Brad

5 14

[Users] hosted-engine setup fails on RHEL6
by Frank Wall 23 Jan '14

23 Jan '14

Hi, I'm currently trying to setup a hosted-engine on a RHEL6 host with nightly repository (because 3.4 BETA didn't work either): [root@host ~]# hosted-engine --deploy [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140123135916.log Version: otopi-1.2.0_master (otopi-1.2.0-0.2.master.20140121.git84f0852.el6) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- During customization use CTRL-D to abort. [ ERROR ] Failed to execute stage 'Environment customization': [Errno 111] Connection refused [ INFO ] Stage: Clean up [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination The full log is available here: http://pastebin.com/Xpa87sjc The matching log entry is below: 2014-01-23 14:17:48 DEBUG otopi.context context._executeMethod:138 Stage customization METHOD otopi.plugins.ovirt_hosted_engine_setup.storage.storage.Plugin._customization 2014-01-23 14:17:48 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:215 DIALOG:SEND During customization use CTRL-D to abort. 2014-01-23 14:17:48 DEBUG otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._check_existing_pools:630 _check_existing_pools 2014-01-23 14:17:48 DEBUG otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._check_existing_pools:631 getConnectedStoragePoolsList 2014-01-23 14:17:48 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", line 729, in _customization self._check_existing_pools() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", line 632, in _check_existing_pools pools = self.serv.s.getConnectedStoragePoolsList() File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__ return self.__send(self.__name, args) File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request verbose=self.__verbose File "/usr/lib64/python2.6/xmlrpclib.py", line 1235, in request self.send_content(h, request_body) File "/usr/lib64/python2.6/xmlrpclib.py", line 1349, in send_content connection.endheaders() File "/usr/lib64/python2.6/httplib.py", line 908, in endheaders self._send_output() File "/usr/lib64/python2.6/httplib.py", line 780, in _send_output self.send(msg) File "/usr/lib64/python2.6/httplib.py", line 739, in send self.connect() File "/usr/lib64/python2.6/site-packages/vdsm/SecureXMLRPCServer.py", line 188, in connect sock = socket.create_connection((self.host, self.port), self.timeout) File "/usr/lib64/python2.6/socket.py", line 567, in create_connection raise error, msg error: [Errno 111] Connection refused 2014-01-23 14:17:48 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Environment customization': [Errno 111] Connection refused RPM version information: otopi-1.2.0-0.2.master.20140121.git84f0852.el6.noarch ovirt-host-deploy-1.2.0-0.2.master.20140120.gitdeb0453.el6.noarch ovirt-hosted-engine-setup-1.2.0-0.0.master.20140117.gitfaf77a5.el6.noarch ovirt-hosted-engine-ha-1.1.0-0.1.beta1.el6.noarch ovirt-engine-sdk-python-3.4.0.2-1.20140121.git42b7d69.el6.noarch ovirt-release-el6-10.0.1-2.noarch vdsm-python-zombiereaper-4.14.1-6.gite008998.el6.noarch vdsm-python-4.14.1-6.gite008998.el6.x86_64 vdsm-cli-4.14.1-6.gite008998.el6.noarch vdsm-xmlrpc-4.14.1-6.gite008998.el6.noarch vdsm-4.14.1-6.gite008998.el6.x86_64 Any hint? Thanks - Frank

4 7

[Users] another networking question: ssh to VM with private dhcp addr
by Robert Story 23 Jan '14

23 Jan '14

--Sig_/w6my2qV.PKZtGA0U_nY_H5Y Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Hello, I've got oVirt 3.3.x all-in-one up and running on CentOS 6.3. The IP address on the ovirtmgmt bridge is static/public. I have not done any additional network/VLAN configuration. If I create a VM and give it an address on the same subnet, I can ssh to it just fine. If I create a VM and let it use dhcp, it gets a 172.31.x.x address. Outgoing access works fine, but I can't figure out what to do to allow me to be able to ssh into those VMs. With straight KVM the VM private network was on a virtual interface on the host, making it easy. But I can't figure out how to do it with oVirt. Any help greatly appreciated. Thanks in advance. Robert --Sig_/w6my2qV.PKZtGA0U_nY_H5Y Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlLgpsIACgkQ7/fVLLY1mnj1fQCeMRXZlVEVu7TYhDOUMZptymdC upUAniuQzBrfuqKTazfNk3VjHPWozuPY =aRJj -----END PGP SIGNATURE----- --Sig_/w6my2qV.PKZtGA0U_nY_H5Y--

2 2

[Users] oVirt 3.4 release notes and what's new section empty
by Gianluca Cecchi 23 Jan '14

23 Jan '14

hello, at http://www.ovirt.org/OVirt_3.4.0_release_notes the what's new section seems to be empty. What major/minor features one would expect as added value passing from 3.3.3 to 3.4? Any other pointers? Thanks, Gianluca

2 1

[Users] disks successfully removed with torage failure message
by Gianluca Cecchi 23 Jan '14

23 Jan '14

Hello, 3.3.2 beta on Fedora 19 engine with 2 Fedora 19 hosts and GusterFS

4 10

[Users] Possible problems testing 3.3.3 RC
by Gianluca Cecchi 23 Jan '14

23 Jan '14

Hello, engine 3.3.3 beta1 on fedora 19 fully updated (for f19 repos). I would like to upgrade and test 3.3.3 RC I just updated ovirt-release so that now I have ovirt-release-fedora-10.0.1-2.noarch yum clean metadata modified new ovirt repofile enabling updates-testing and disabling beta [ovirt-stable] name=Older Stable builds of the oVirt project baseurl=http://ovirt.org/releases/stable/rpm/Fedora/$releasever/ [ovirt-3.3.2] name=oVirt 3.3.2 release baseurl=http://resources.ovirt.org/releases/3.3.2/rpm/Fedora/$releasever/ [ovirt-updates-testing] name=Test Updates builds of the oVirt project baseurl=http://ovirt.org/releases/updates-testing/rpm/Fedora/$releasever/ Even if ovirt update will be made through engine-setup, I presum that a "yum update" shouldn't give any depedency error, correct? Instead I have: # yum update Loaded plugins: langpacks, refresh-packagekit, versionlock Resolving Dependencies --> Running transaction check ---> Package ovirt-engine-dwh.noarch 0:3.3.3-1.fc19 will be updated ---> Package ovirt-engine-dwh.noarch 0:3.4.0-0.2.master.20140122122024.fc19 will be an update --> Processing Dependency: ovirt-engine-dwh-setup >= 3.4.0-0.2.master.20140122122024.fc19 for package: ovirt-engine-dwh-3.4.0-0.2.master.20140122122024.fc19.noarch ---> Package ovirt-engine-lib.noarch 0:3.3.3-0.1.beta1.fc19 will be updated ---> Package ovirt-engine-lib.noarch 0:3.3.3-1.fc19 will be an update ---> Package ovirt-engine-setup.noarch 0:3.3.3-0.1.beta1.fc19 will be updated ---> Package ovirt-engine-setup.noarch 0:3.3.3-1.fc19 will be an update ---> Package ovirt-engine-websocket-proxy.noarch 0:3.3.3-0.1.beta1.fc19 will be updated ---> Package ovirt-engine-websocket-proxy.noarch 0:3.3.3-1.fc19 will be an update ---> Package ovirt-image-uploader.noarch 0:3.3.2-1.fc19 will be updated ---> Package ovirt-image-uploader.noarch 0:3.3.3-1.fc19 will be an update ---> Package ovirt-iso-uploader.noarch 0:3.3.2-1.fc19 will be updated ---> Package ovirt-iso-uploader.noarch 0:3.3.3-1.fc19 will be an update ---> Package ovirt-log-collector.noarch 0:3.3.2-2.fc19 will be updated ---> Package ovirt-log-collector.noarch 0:3.3.3-1.fc19 will be an update --> Running transaction check ---> Package ovirt-engine-dwh-setup.noarch 0:3.4.0-0.2.master.20140122122024.fc19 will be installed --> Processing Dependency: ovirt-engine-setup-plugin-ovirt-engine-common for package: ovirt-engine-dwh-setup-3.4.0-0.2.master.20140122122024.fc19.noarch --> Finished Dependency Resolution Error: Package: ovirt-engine-dwh-setup-3.4.0-0.2.master.20140122122024.fc19.noarch (ovirt-updates-testing) Requires: ovirt-engine-setup-plugin-ovirt-engine-common You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Why ovirt-engine-dwh.noarch 0:3.4.0-0.2.master.20140122122024.fc19 is proposed as an update? Gianluca

3 5

[Users] Ovirt 3.3.2. and vdsm 4.14
by Federico Alberto Sayd 23 Jan '14

23 Jan '14

Hello: Why Ovirt 3.3.2. installs vdsm 4.14 on Centos 6.5?? I am installing 5 nodes with Centos 6.5. I have installed two nodes, I have added: 1 - epel repo (http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.r…) 2 - ovirt repo (http://ovirt.org/releases/ovirt-release-el.noarch.rpm) In the two first nodes Ovirt engine installed vdsm 4.13. Now I have installed the third node with the same repos and Ovirt installs vdsm 4.14 and when it tries to activate the node complains about the vdsm version, it says that vdsm version is not compatible: Host "my-third-node" is installed with VDSM version (4.14) and cannot join cluster Cluster-XXX which is compatible with VDSM versions [4.13, 4.9, 4.11, 4.12, 4.10]. /etc/yum.repos.d in the trhee nodes are the same: CentOS-Base.repo CentOS-Debuginfo.repo CentOS-Media.repo CentOS-Vault.repo el6-ovirt.repo epel.repo epel-testing.repo glusterfs-epel.repo Why the difference? It is not suppossed that oVirt 3.3.2 should install vdsm 3.13 ?? Thanks, Federico

2 1

[Users] What component to use when reporting bugs on engine-managed-domains?
by Allon Mureinik 23 Jan '14

23 Jan '14

Hi list, I'm taking a look at engine-managed-domains as part of the oVirt 3.4 Test Day, and was wondering what component I should use to report bugs on it. The closest available component seems to be ovirt-engine-installer, as this is a "setup" flow in some sense, but it doesn't really feel right. Any better ideas? Or, alternatively, is there any way to add an ovirt-engine-managed-domains component to bugzilla? Thanks, Allon

2 2

[Users] ovirt-guest-agent beta1 packages for the ovirt 3.4 testday
by Vinzenz Feenstra 23 Jan '14

23 Jan '14

Hi, For the today's ovirt 3.4 testday I have prepared repositories for Fedora 19, Fedora 20 and el6/CentOS6: http://evilissimo.fedorapeople.org/repos/ovirt-guest-agent/ovirt-3.4/beta1/ Please let me know if you find any issues. -- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R & D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Users] no new mom for ovirt?
by Sven Kieske 23 Jan '14

23 Jan '14

Hi, I just checked this BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1025845 This is closed for RedHat but afaik not for upstream. It mentions the fixed mom version: mom-0.3.2-8.el6ev but on resources.ovirt.org I find just older versions like http://resources.ovirt.org/releases/3.4.0-alpha/rpm/EL/6/noarch/mom-0.3.2-3… so downstream (payed) red hat has newer versions than upstream how can that be? Or am I looking in the wrong repo? Should this not be hosted on ovirt.org repo? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

4 5

[Users] Upgrade 3.3 - 3.4
by Maurice James 23 Jan '14

23 Jan '14

------=_NextPart_000_00B7_01CF17AB.7109AE20 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Anyone else seeing this error on upgrade from 3.3 - 3.4? [ ERROR ] Yum [u'Errors were encountered while downloading packages.', u'ovirt-engine-backend-3.4.0-0.5.beta1.el6.noarch: failure: noarch/ovirt-engine-backend-3.4.0-0.5.beta1.el6.noarch.rpm from ovirt-3.4.0-prerelease: [Errno 256] No more mirrors to try.'] ------=_NextPart_000_00B7_01CF17AB.7109AE20 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1><p = class=3DMsoNormal>Anyone else seeing this error on upgrade from 3.3 - = 3.4?<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal>[ ERROR ] Yum [u'Errors were encountered while = downloading packages.', = u'ovirt-engine-backend-3.4.0-0.5.beta1.el6.noarch: failure: = noarch/ovirt-engine-backend-3.4.0-0.5.beta1.el6.noarch.rpm from = ovirt-3.4.0-prerelease: [Errno 256] No more mirrors to = try.']<o:p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p = class=3DMsoNormal><o:p> </o:p></p></div></body></html> ------=_NextPart_000_00B7_01CF17AB.7109AE20--

2 1

[Users] oVirt 3.4.0 beta is now available
by Sandro Bonazzola 23 Jan '14

23 Jan '14

The oVirt team is pleased to announce that the 3.4.0 Release is now available in beta for testing. Release notes and information on the changes for this update are still being worked on and will be available soon on the wiki[1]. Please ensure to follow install instruction from release notes if you're going to test it. A new repository ovirt-3.4.0-prerelease has been added for delivering this beta and future refreshes until release candidate. A new oVirt Node build will be available soon as well. You're welcome to join us testing this beta release in tomorrow test day [2]! [1] http://www.ovirt.org/OVirt_3.4.0_release_notes [2] http://www.ovirt.org/OVirt_3.4_Test_Day -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

4 9

[Users] fencing: HP ilo100 status does NMI, reboots computer
by Ted Miller 23 Jan '14

23 Jan '14

--------------040009030705040405030507 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit I am having trouble getting fencing to work on my HP DL180 g6 servers. They have ilo100 controllers. The documentation mentions ipmi compliance, but there are problems. The ipmilan driver gets a response, but it is the wrong response. A status request results in the NMI line being asserted, which (in standard PC architecture) is the same as pressing the reset button (which these servers don't have). Here are some log excerpts: 16:33 just after re-running re-install from engine, which ended: *From oVirt GUI "Events" tab *Host s1 installed State was set to up for host s1. Host s3 from cluster Default was *chosen* as a proxy to execute Status command on Host s1 Host s1 power management was verified successfully 16:34 *on ssh screen:* Message from syslogd@s1 at Jan 21 16:34:14 ... kernel:Uhhuh. NMI received for unknown reason 31 on CPU 0. Message from syslogd@s1 at Jan 21 16:34:14 ... kernel:Do you have a strange power saving mode enabled? Message from syslogd@s1 at Jan 21 16:34:14 ... kernel:Dazed and confused, but trying to continue ***from IPMI web interface event log:* Generic 01/21/2014 21:34:15 Gen ID 0x21 Bus Uncorrectable Error Assertion Generic 01/21/2014 21:34:15 IOH_NMI_DETECT State Asserted Assertion * From oVirt GUI "Events" tab *Host s1 is non responsive Host s3 from cluster Default was chosen as a proxy to execute Restart command on Host s1 Host s3 from cluster Default was chosen as a proxy to execute Stop command on Host s1 Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1 Host s1 was stopped by engine Manual fence for host s1 was started Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1 Host s3 from cluster Default was chosen as a proxy to execute Start command on Host s1 Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1 Host s1 was started by engine Host s1 is rebooting State was set to up for host s1. Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1 16:41 saw kernel panic output on remote KVM terminal computer rebooted itself I have searched for ilo100, but find nothing related to ovirt, so am clueless as to what is the "correct" driver for this hardware. So far I have seen this mostly on server1 (s1), but that is also the one I have cycled up and down most often. I have also seen where the commands are apparently issued too fast (these servers are fairly slow booting). For example, I found that one server was powered down when the boot process had gotten to the stage where the RAID controller screen was up, so it had not had time to complete the boot that was already in progress. Ted Miller Elkhart, IN, USA --------------040009030705040405030507 Content-Type: text/html; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body text="#000000" bgcolor="#FFFFFF"> I am having trouble getting fencing to work on my HP DL180 g6 servers.  They have ilo100 controllers.  The documentation mentions ipmi compliance, but there are problems.<br> <br> The ipmilan driver gets a response, but it is the wrong response.  A status request results in the NMI line being asserted, which (in standard PC architecture) is the same as pressing the reset button (which these servers don't have).<br> <br> Here are some log excerpts:<br> <br> <table style="text-align: left; width: 100%;" border="1" cellpadding="2" cellspacing="2"> <tbody> <tr> <td style="vertical-align: top;">16:33<br> </td> <td style="vertical-align: top;">just after re-running re-install from engine, which ended:<br> <b>From oVirt GUI "Events" tab<br> </b>Host s1 installed<br> State was set to up for host s1.<br> Host s3 from cluster Default was <b>chosen</b> as a proxy to execute Status command on Host s1<br> Host s1 power management was verified successfully<br> </td> </tr> <tr> <td style="vertical-align: top;">16:34<br> </td> <td style="vertical-align: top;"><b>on ssh screen:</b><br> Message from syslogd@s1 at Jan 21 16:34:14 ...<br>  kernel:Uhhuh. NMI received for unknown reason 31 on CPU 0.<br> <br> Message from syslogd@s1 at Jan 21 16:34:14 ...<br>  kernel:Do you have a strange power saving mode enabled?<br> <br> Message from syslogd@s1 at Jan 21 16:34:14 ...<br>  kernel:Dazed and confused, but trying to continue<br> <br> <b></b><b>from IPMI web interface event log:</b><br> <table id="Table1" class="datatable" cellpadding="5"> <tbody> <tr> <td>Generic</td> <td>01/21/2014</td> <td>21:34:15</td> <td>Gen ID 0x21</td> <td>Bus Uncorrectable Error</td> <td>Assertion</td> </tr> <tr> <td>Generic</td> <td>01/21/2014</td> <td>21:34:15</td> <td>IOH_NMI_DETECT</td> <td>State Asserted</td> <td>Assertion</td> </tr> </tbody> </table> <b><br> From oVirt GUI "Events" tab<br> </b>Host s1 is non responsive<br> Host s3 from cluster Default was chosen as a proxy to execute Restart command on Host s1<br> Host s3 from cluster Default was chosen as a proxy to execute Stop command on Host s1<br> Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1<br> Host s1 was stopped by engine<br> Manual fence for host s1 was started<br> Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1<br> Host s3 from cluster Default was chosen as a proxy to execute Start command on Host s1<br> Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1<br> Host s1 was started by engine<br> Host s1 is rebooting<br> State was set to up for host s1.<br> Host s3 from cluster Default was chosen as a proxy to execute Status command on Host s1<br> </td> </tr> <tr> <td style="vertical-align: top;">16:41<br> </td> <td style="vertical-align: top;">saw kernel panic output on remote KVM terminal<br> computer rebooted itself</td> </tr> </tbody> </table> <br> I have searched for ilo100, but find nothing related to ovirt, so am clueless as to what is the "correct" driver for this hardware.<br> <br> So far I have seen this mostly on server1 (s1), but that is also the one I have cycled up and down most often.<br> <br> I have also seen where the commands are apparently issued too fast (these servers are fairly slow booting).  For example, I found that one server was powered down when the boot process had gotten to the stage where the RAID controller screen was up, so it had not had time to complete the boot that was already in progress.<br> <br> Ted Miller<br> Elkhart, IN, USA<br> <br> </body> </html> --------------040009030705040405030507--

3 4

[Users] Reconfirming membership to do excessive bounces
by Pat Pierson 22 Jan '14

22 Jan '14

Sorry if this is a simple answer but I could not find anything on google about this. I keep having to reconfirm my membership with this list because I assume google is kicking back messages. Message is as follows: Your membership in the mailing list Users has been disabled due to excessive bounces The last bounce received from you was dated 21-Jan-2014. You will not get any more messages from this list until you re-enable your membership. You will receive 3 more reminders like this before your membership in the list is deleted. To re-enable your membership, you can simply respond to this message (leaving the Subject: line intact), or visit the confirmation page at Has anyone else had this issue with this list and gmail? if so how can i fix it? -- Patrick Pierson

2 1

[Users] membership disabled due to bouces again..
by Gianluca Cecchi 22 Jan '14

22 Jan '14

Already spotted this problem before... I just found that I lose e-mails from Tue Jan 21 11:45:10 EST 2014 to Wed Jan 22 15:35:51 EST 2014 And received only some minutes ago (22/Jan/2014 21:26 Italy Time) an e-mail regarding my disabled membership apparently occurred at Mon, Jan 20, 2014 at 4:11 PM so that I didn't either know before .... Any way to solve this? I have to mix e-mail received and archives... Gianluca

1 0

[Users] Black VM Install Console
by David Li 22 Jan '14

22 Jan '14

Hi, My first time to install a VM on ovirt has encountered a problem. I tried to open up a console to continue the install process. But all I got is a blank window and a request to save a file which I did. The window remained blank and I couldn't see any activities. I went to the node itself and tried to see if I could use virsh tool to understand what's going on. But I was asked for a username and password to perform any actions. Any idea what I should do at this time? David

9 36

Re: [Users] Problem with python-cpopen dependency on f19 AIO stable
by Martijn Grendelman 22 Jan '14

22 Jan '14

I have the same issue on a CentOS node after updating it to 6.5: > Resolving Dependencies > --> Running transaction check > ---> Package python-cpopen.x86_64 0:1.2.3-4.el6 will be obsoleted > ---> Package vdsm-python-cpopen.x86_64 0:4.13.0-11.el6 will be obsoleting > --> Finished Dependency Resolution > > Dependencies Resolved > > ======================================================================================================================================================== > Package Arch Version Repository Size > ======================================================================================================================================================== > Installing: > vdsm-python-cpopen x86_64 4.13.0-11.el6 ovirt-stable 19 k > replacing python-cpopen.x86_64 1.2.3-4.el6 > > Transaction Summary > ======================================================================================================================================================== > Install 1 Package(s) > > Total download size: 19 k > Is this ok [y/N]: y On a subsequent run of 'yum update', python-cpopen will replace vdsm-python-cpopen, and so on. Cheers, Martijn. Vinzenz Feenstra schreef op 5-12-2013 8:34: > Forwading to vdsm-devel > > On 12/04/2013 08:59 AM, Gianluca Cecchi wrote: >> Hello, >> since yesterday evening I have this sort of dependency problem with updates >> >> yum update >> say >> >> Resolving Dependencies >> --> Running transaction check >> ---> Package python-cpopen.x86_64 0:1.2.3-4.fc19 will be obsoleting >> ---> Package vdsm-python-cpopen.x86_64 0:4.13.0-11.fc19 will be obsoleted >> --> Finished Dependency Resolution >> >> Dependencies Resolved >> >> ============================================================================================================================= >> Package Arch Version >> Repository Size >> ============================================================================================================================= >> Installing: >> python-cpopen x86_64 >> 1.2.3-4.fc19 updates 19 k >> replacing vdsm-python-cpopen.x86_64 4.13.0-11.fc19 >> >> Transaction Summary >> ============================================================================================================================= >> Install 1 Package >> >> If I go ahead and run yum update again I have: >> >> Dependencies Resolved >> >> ============================================================================================================================= >> Package Arch Version >> Repository Size >> ============================================================================================================================= >> Installing: >> vdsm-python-cpopen x86_64 >> 4.13.0-11.fc19 ovirt-stable 20 k >> replacing python-cpopen.x86_64 1.2.3-4.fc19 >> >> Transaction Summary >> ============================================================================================================================= >> Install 1 Package >> >> and so again in a loop.... >> >> Gianluca >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

3 2

[Users] oVirt 3.3.3 Release Candidate is now available
by Sandro Bonazzola 22 Jan '14

22 Jan '14

The oVirt team is pleased to announce that the 3.3.3 Release Candidate is now available in ovirt-updates-testing [1]. Feel free to join us testing it[2] and verifying the bugzilla entries actually under verification [3]. Release notes for this update are available on the wiki [4]. A new oVirt Node build will be available soon as well. [1] http://resources.ovirt.org/releases/updates-testing [2] http://www.ovirt.org/Testing/Ovirt_3.3.3_testing [3] http://red.ht/KEesdK [4] http://www.ovirt.org/OVirt_3.3.3_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Users] Gluster volume snapshots feature UX feedback
by Malini Rao 22 Jan '14

22 Jan '14

Hi Shubendu, I saw your invite for your walkthrough on the feature - Gluster volume snapshots and also followed the feature link on the wiki and reviewed it. From the UX/ UI perspective, it looks good and I had only a couple of comments. The remove snapshot section seems to indicate an ability to delete multiple snapshots at once and I am not sure we support any batch actions as of now elsewhere in the tool. Ctrl+click is not supported on lists today I think. So, I wanted to find out if you were going to introduce this for your feature. If yes, then we should ensure all other grids are enabled with this multi-select capability. If not, we should refrain from introducing something just for this feature for the sake of consistency and across feature product cohesiveness. The other feedback I have is on the snapshot configuration dialog. It will be great if any units can be added to the right of the field because one is a number and the other is a percentage but the field labels are so similar sounding. The field labels with the dashes in between the words also make it look very homegrown and seems like we are exposing some internal labels to our users. Last but not least, since the terminology of 'snapshots' overlaps with VM snapshots, we should just ensure that no similar action does wildly different things although it seems like snapshotting here is much more simple. Hope this is helpful, Thanks Malini

2 1

[Users] Error when trying to create a new ISO storage domain
by Willard Dennis 21 Jan '14

21 Jan '14

--_84d40e63-2fba-48dd-8b16-7e7d22a9a18a_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all=2C I am trying to define a new ISO storage domain. I go to System > Storage=2C= click on the "New Domain" link=2C and fill in the requisite fields. "Domai= n Function / Storage Type" drop is set to "ISO / NFS"=2C and I verified tha= t I have the proper NFS path to the export on the NFS server I want to use.= However=2C when I click the "OK" button=2C I am getting the following popu= p: -----Error while executing action Add Storage Connection: Permission settin= gs on the specified path do not allow access to the storage.Verify permissi= on settings on the specified storage path.----- I have verified that I can manually mount the NFS filesystem on the host de= fined in the "Use Host" drop [as root]=2C and I have looked in /var/log/mes= sages (on the mounting host=2C as well as the NFS server=2C and do not see = any errors... Please not that the NFS export is a pre-existing share on the= NFS server=2C and does contain pre-existing data (ISOs=2C etc.) How can I debug this? = --_84d40e63-2fba-48dd-8b16-7e7d22a9a18a_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'>Hi all=2C<div><br></div><div>I a= m trying to define a new ISO storage domain. I go to System &gt=3B Storage= =2C click on the "New Domain" link=2C and fill in the requisite fields. "Do= main Function / Storage Type" drop is set to "ISO / NFS"=2C and I verified = that I have the proper NFS path to the export on the NFS server I want to u= se. However=2C when I click the "OK" button=2C I am getting the following p= opup:<br><div><br></div><div>-----</div><div><div>Error while executing act= ion Add Storage Connection: Permission settings on the specified path do no= t allow access to the storage.</div><div>Verify permission settings on the = specified storage path.</div></div></div><div>-----</div><div><br></div><di= v>I have verified that I can manually mount the NFS filesystem on the host = defined in the "Use Host" drop [as root]=2C and I have looked in /var/log/m= essages (on the mounting host=2C as well as the NFS server=2C and do not se= e any errors... Please not that the NFS export is a pre-existing share on t= he NFS server=2C and does contain pre-existing data (ISOs=2C etc.)</div><di= v><br></div><div>How can I debug this?</div> </div></body> </html>= --_84d40e63-2fba-48dd-8b16-7e7d22a9a18a_--

3 5