- Users - oVirt List Archives

[Users] Failed to invoke scheduled method gluster_async_task_poll_event
by William Kwan 17 Jan '14

17 Jan '14

---1226699745-1136156742-1389987069=:31833 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi,=0A=0AKeep seeing this in my engine.log, any idea where does this come f= rom?=0A"Failed to invoke scheduled method gluster_async_task_poll_event: ja= va.lang.reflect.InvocationTargetException"=0A=0AI'm using 3.3.2-1.el6 with= =0Aglusterfs-server-3.4.2-1.el6.x86_64=0Avdsm-gluster-4.13.2-1.el6.noarch= =0A=0A=0A2014-01-17 14:26:11,615 ERROR [org.ovirt.engine.core.utils.timer.S= chedulerUtilQuartzImpl] (DefaultQuartzScheduler_Worker-96) Failed to invoke= scheduled method gluster_async_task_poll_event: java.lang.reflect.Invocati= onTargetException=0A=A0=A0=A0=A0=A0=A0=A0 at sun.reflect.GeneratedMethodAcc= essor31.invoke(Unknown Source) [:1.7.0_51]=0A=A0=A0=A0=A0=A0=A0=A0 at sun.r= eflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.jav= a:43) [rt.jar:1.7.0_51]=0A=A0=A0=A0=A0=A0=A0=A0 at java.lang.reflect.Method= .invoke(Method.java:606) [rt.jar:1.7.0_51]=0A=A0=A0=A0=A0=A0=A0=A0 at org.o= virt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:60) [schedu= ler.jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.quartz.core.JobRunShell.run(JobRun= Shell.java:213) [quartz.jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.quartz.simpl.S= impleThreadPool$WorkerThread.run(SimpleThreadPool.java:557) [quartz.jar:]= =0ACaused by: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLEx= ception: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org= .apache.xmlrpc.XmlRpcException: <type 'exceptions.Exception'>:method "glust= erTasksList" is not supported (Failed with error VDS_NETWORK_ERROR and code= 5022)=0A=A0=A0=A0=A0=A0=A0=A0 at org.ovirt.engine.core.bll.VdsHandler.hand= leVdsResult(VdsHandler.java:122) [bll.jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.= ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontend= Impl.java:33) [bll.jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.ovirt.engine.core.b= ll.gluster.tasks.GlusterTasksService.runVdsCommand(GlusterTasksService.java= :60) [bll.jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.ovirt.engine.core.bll.gluste= r.tasks.GlusterTasksService.getTaskListForCluster(GlusterTasksService.java:= 28) [bll.jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.ovirt.engine.core.bll.gluster= .GlusterTasksSyncJob.updateTasksInCluster(GlusterTasksSyncJob.java:67) [bll= .jar:]=0A=A0=A0=A0=A0=A0=A0=A0 at org.ovirt.engine.core.bll.gluster.Gluster= TasksSyncJob.updateGlusterAsyncTasks(GlusterTasksSyncJob.java:56) [bll.jar:= ]=0A=A0=A0=A0=A0=A0=A0=A0 ... 6 more=0A=0AWill ---1226699745-1136156742-1389987069=:31833 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"color:#000; background-color:#fff; font-family:He= lveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;fo= nt-size:12pt">Hi,<br><br>Keep seeing this in my engine.log, any idea where = does this come from?<br>"<font size=3D"1">Failed to invoke scheduled method= gluster_async_task_poll_event: java.lang.reflect.InvocationTargetException= "<br><br><font size=3D"2">I'm using 3.3</font><font size=3D"2">.2-1.el6 wit= h<br>glusterfs-server-3.4.2-1.el6.x86_64<br>vdsm-gluster-4.13.2-1.el6.noarc= h</font><br><br></font><br><font size=3D"1">2014-01-17 14:26:11,615 ERROR [= org.ovirt.engine.core.utils.timer.SchedulerUtilQuartzImpl] (DefaultQuartzSc= heduler_Worker-96) Failed to invoke scheduled method gluster_async_task_pol= l_event: java.lang.reflect.InvocationTargetException<br>   &= nbsp;    at sun.reflect.GeneratedMethodAccessor31.invoke(Unk= nown Source) [:1.7.0_51]<br>        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorIm= pl.java:43) [rt.jar:1.7.0_51]<br>       = at java.lang.reflect.Method.invoke(Method.java:606) [rt.jar:1.7.0_51]<br>&= nbsp;       at org.ovirt.engine.core.utils.ti= mer.JobWrapper.execute(JobWrapper.java:60) [scheduler.jar:]<br>  =       at org.quartz.core.JobRunShell.run(JobRunShe= ll.java:213) [quartz.jar:]<br>        at= org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:5= 57) [quartz.jar:]<br>Caused by: org.ovirt.engine.core.common.errors.VdcBLLE= xception: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNet= workException: org.apache.xmlrpc.XmlRpcException: <type 'exceptions.Exce= ption'>:method "glusterTasksList" is not supported (Failed with error VD= S_NETWORK_ERROR and code 5022)<br>        at org.ovirt.engine.co= re.bll.VdsHandler.handleVdsResult(VdsHandler.java:122) [bll.jar:]<br> =        at org.ovirt.engine.core.bll.VDSBroker= FrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:]<br>&nb= sp;       at org.ovirt.engine.core.bll.gluste= r.tasks.GlusterTasksService.runVdsCommand(GlusterTasksService.java:60) [bll= .jar:]<br>        at org.ovirt.engine.co= re.bll.gluster.tasks.GlusterTasksService.getTaskListForCluster(GlusterTasks= Service.java:28) [bll.jar:]<br>        a= t org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updateTasksInCluste= r(GlusterTasksSyncJob.java:67) [bll.jar:]<br>     =    at org.ovirt.engine.core.bll.gluster.GlusterTasksSyncJob.updat= eGlusterAsyncTasks(GlusterTasksSyncJob.java:56) [bll.jar:]<br>        ... 6 more<br></f= ont><br>Will<br><div><br></div></div></body></html> ---1226699745-1136156742-1389987069=:31833--

2 1

[Users] installation failed on cluster host
by William Kwan 17 Jan '14

17 Jan '14

---1226699745-752350724-1389742179=:10403 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable HI,=0A=0ARunning through the whole installation exercises on two hosts agai= n with the latest release on CentOS6.5.=0A=0AI added a host to a new cluste= r.=A0 There are "action items" listed under the new host. One of them is = =0A=A0=A0=A0=A0=A0 "Host installation failed. Fix installation issues and t= ry to Re-Install"=0A=0A=0AI clicked Re-install, I monitor the engine.log an= d see the followings=0A=A0=A0=A0 Installation 10.10.25.10: Yum [u'Errors we= re encountered while downloading packages.', u'libselinux-=A0 python-2.0.94= -5.3.el6_4.1.x86_64: failure: Packages/libselinux-python-2.0.94-5.3.el6_4.1= .x86_64.rpm from base: [Errno 256] No more mirrors to try.']=0A=0A=0AI'm su= re I ran yum update already and I cleaned the db and rerun update...etc.=A0= Eventually I manually did `yum install vdsm.x86_64` on the host.=A0 Try to= run re-install again and I still get yum error.=A0 =0A=A0=A0 Yum Cannot qu= eue package iproute: Cannot find a valid baseurl for repo: base=0A=0AERROR = [org.ovirt.engine.core.bll.InstallerMessages] (VdsDeploy) Installation 10.1= 0.25.10: Failed to execute stage 'Environment packages setup': Cannot find = a valid baseurl for repo: base=0A=0A=0Aiproute is sure installed.=0A# rpm -= qa|grep iproute=0Aiproute-2.6.32-31.el6.x86_64=0A=0A=0ASomething in ssh?=A0= Password is sure correct, what could be wrong=0A=0AWill ---1226699745-752350724-1389742179=:10403 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"color:#000; background-color:#fff; font-family:He= lveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;fo= nt-size:12pt">HI,<br><br>Running through the whole installation exercises o= n two hosts again with the latest release on CentOS6.5.<br><br>I added a ho= st to a new cluster.  There are "action items" listed under the new ho= st. One of them is <br>      "Host installation fa= iled. Fix installation issues and try to Re-Install"<br><br><br>I clicked R= e-install, I monitor the engine.log and see the followings<br>  &= nbsp; Installation 10.10.25.10: Yum [u'Errors were encountered while downlo= ading packages.', u'libselinux-  python-2.0.94-5.3.el6_4.1.x86_64: fai= lure: Packages/libselinux-python-2.0.94-5.3.el6_4.1.x86_64.rpm from base: [= Errno 256] No more mirrors to try.']<br><br><br>I'm sure I ran yum update a= lready and I cleaned the db and rerun update...etc.  Eventually I manually did `yum install vdsm.x86_64` on the host.  Try to run re-in= stall again and I still get yum error.  <br>   Yum Cannot qu= eue package iproute: Cannot find a valid baseurl for repo: base<br><div sty= le=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: HelveticaNeue,Helv= etica Neue,Helvetica,Arial,Lucida Grande,sans-serif; background-color: tran= sparent; font-style: normal;">ERROR [org.ovirt.engine.core.bll.InstallerMes= sages] (VdsDeploy) Installation 10.10.25.10: Failed to execute stage 'Envir= onment packages setup': Cannot find a valid baseurl for repo: base</div><di= v style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: HelveticaNeue= ,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-serif; background-color:= transparent; font-style: normal;"><br></div><div style=3D"color: rgb(0, 0,= 0); font-size: 16px; font-family: HelveticaNeue,Helvetica Neue,Helvetica,A= rial,Lucida Grande,sans-serif; background-color: transparent; font-style: normal;"><br></div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; fon= t-family: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-s= erif; background-color: transparent; font-style: normal;">iproute is sure i= nstalled.</div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-fam= ily: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-serif;= background-color: transparent; font-style: normal;"># rpm -qa|grep iproute= <br>iproute-2.6.32-31.el6.x86_64<br></div><div style=3D"color: rgb(0, 0, 0)= ; font-size: 16px; font-family: HelveticaNeue,Helvetica Neue,Helvetica,Aria= l,Lucida Grande,sans-serif; background-color: transparent; font-style: norm= al;"><br></div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-fam= ily: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-serif;= background-color: transparent; font-style: normal;">Something in ssh?&nbsp= ; Password is sure correct, what could be wrong</div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: HelveticaNeue,Helvetica Neue,H= elvetica,Arial,Lucida Grande,sans-serif; background-color: transparent; fon= t-style: normal;"><br></div><div style=3D"color: rgb(0, 0, 0); font-size: 1= 6px; font-family: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grand= e,sans-serif; background-color: transparent; font-style: normal;">Will<br><= /div><div style=3D"color: rgb(0, 0, 0); font-size: 16px; font-family: Helve= ticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-serif; backgroun= d-color: transparent; font-style: normal;"><br><br></div></div></body></htm= l> ---1226699745-752350724-1389742179=:10403--

5 5

[Users] Searching for VMs with snapshots
by noc 17 Jan '14

17 Jan '14

Hi All, I would like to see, in the webui, all VMs that have snapshots attached to them but I'm not able to construct a search that will work. For one thing there is no 'Snapshot' category so I think that it will be impossible. The use case is that I would like to have a way to see, in the webui, which VMs are running stateless, accidents happen :-( . Joop

2 1

[Users] [QE] oVirt 3.4.0 alpha / beta status
by Sandro Bonazzola 17 Jan '14

17 Jan '14

Hi, oVirt 3.4.0 alpha has been released and is actually on QA. An issue has been found in VDSM so we have updated the packages in alpha repositories for Fedora. We had an issue with nightly build for EL6 packages yesterday so EL6 repository is not yet updated. We'll try to sync it today, I'm sorry for the inconvenient. We'll start composing oVirt 3.4.0 beta on 2014-01-20 14:00 UTC from 3.4 branches. The bug tracker [1] shows the following bugs blocking the release: Whiteboard Bug ID Summary gluster 1038988 Gluster brick sync does not work when host has multiple interfaces integration 1054080 gracefully warn about unsupported upgrade from legacy releases network 1054195 [NetworkLabels] Attaching two labeled networks to a cluster result in failure of the latter There are still 280 bugs [2] targeted to 3.4.0. Excluding node and documentation bugs we still have 237 bugs [3] targeted to 3.4.0. Please review them as soon as possible. Maintainers: - Please remember to rebuild your packages before 2014-01-21 12:00 UTC if you want them to be included in 3.4.0 beta. - Please add the bugs to the tracker if you think that 3.4.0 should not be released without them fixed. - Please provide ETA on blockers bugs - Please update the target to 3.4.1 or any next release for bugs that won't be in 3.4.0: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] - Please update http://www.ovirt.org/OVirt_3.4_TestDay before 2014-01-23 For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug. Please also be prepared for upcoming oVirt 3.4.0 Test Day on 2014-01-23! Thanks to all people already testing 3.4.0 alpha! [1] https://bugzilla.redhat.com/1024889 [2] http://red.ht/1eIRZXM [3] http://red.ht/1auBU3r [4] http://www.ovirt.org/OVirt_3.4.0_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 2

[Users] Issues installing hosted-engine with 3.4.0 alpha
by Andrew Lau 17 Jan '14

17 Jan '14

Hi, I'm giving the new hosted-engine feature a try with the new 3.4.0 alpha build on centos 6.5 hosted-engine --deply seems to fail at the 'Environment setup" [ ERROR ] Failed to execute stage 'Environment setup': Command '/sbin/service' failed to execute Within the logs I believe it seems to be related to vdsm. Logs show "VDS daemon is not running" service vdsm start gives the following error: initctl: Job is already running: libvirtd vdsm: Running mkdirs vdsm: Running configure_coredump vdsm: Running run_init_hooks vdsm: Running gencerts vdsm: Running check_is_configured libvirt is already configured for vdsm sanlock service is already configured vdsm: Running validate_configuration SUCCESS: ssl configured to true. No conflicts vdsm: Running prepare_transient_repository vdsm: Running syslog_available vdsm: Running nwfilter vdsm: Running dummybr vdsm: Running load_needed_modules vdsm: Running tune_system vdsm: Running test_space vdsm: Running test_lo vdsm: Running restore_nets vdsm: Running unified_network_persistence_upgrade Usage: /usr/bin/vdsm-tool [options] <action> [arguments] Valid options: -h, --help Commands in module configurator: configure Configure external services for vdsm is-configured Determine if module is configured validate-config Determine if configuration is valid Commands in module dummybr: dummybr Defines dummy bridge on libvirt network. Commands in module load_needed_modules: load-needed-modules Load needed modules Commands in module nwfilter: nwfilter Defines network filters on libvirt Commands in module passwd: set-saslpasswd Set vdsm password for libvirt connection Commands in module restore_nets: restore-nets Restores the networks to what was previously persisted via vdsm. Commands in module seboolsetup: sebool-config Enable the required selinux booleans sebool-unconfig Disable the required selinux booleans Commands in module service: service-disable Disable a system service service-is-managed Check the existence of a service service-reload Notify a system service to reload configurations service-restart Restart a system service service-start Start a system service service-status Get status of a system service service-stop Stop a system service Commands in module transient: cleanup-transient-repository Cleanup the unused transient disks present in the repository. (NOTE: it is recommended to NOT execute this command when the vdsm daemon is running) setup-transient-repository Prepare the transient disks repository Commands in module unified_persistence: upgrade-unified-persistence Upgrade host networking persistence from ifcfg to unified if the persistence model is set as unified in /usr/lib64/python2.X/site-packages/ vdsm/config.py Commands in module upgrade: Commands in module upgrade_300_networks: upgrade-3.0.0-networks Since ovirt-3.0, Vdsm uses libvirt networks (with names vdsm-*) to store its own networks. Older Vdsms did not have those defined, and used only linux bridges. This command is kept as an upgrade tool for the (very few) people who still have such old setups running. Commands in module validate_ovirt_certs: validate-ovirt-certs Validate vdsmcert.pem against cacert.pem. If current cacert.pem is invalidate, it will find a validate certificate file and replace the old cacert.pem with it. And then persist it. Commands in module vdsm-id: vdsm-id Printing host uuid vdsm: failed to execute unified_network_persistence_upgrade, error code 1 vdsm start [FAILED] Any suggestions? Thanks, Andrew

2 6

Re: [Users] Gluster storage
by Gianluca Cecchi 17 Jan '14

17 Jan '14

On Fri, Nov 29, 2013 at 11:48 AM, Dan Kenigsberg wrote: > On Fri, Nov 29, 2013 at 04:04:03PM +0530, Vijay Bellur wrote: > >> >> There are two ways in which GlusterFS can be used as a storage domain: >> >> a) Use gluster native/fuse access with POSIXFS >> >> b) Use the gluster native storage domain to bypass fuse (with >> libgfapi). We are currently addressing an issue in libvirt >> (https://bugzilla.redhat.com/show_bug.cgi?id=1017289) to enable >> snapshot support with libgfapi. Once this is addressed, we will have >> libgfapi support in the native storage domain. > > It won't be as immediate, since there's a required fix on Vdsm's side > (Bug 1022961 - Running a VM from a gluster domain uses mount instead of > gluster URI) > >> Till then, fuse would >> be used with native storage domain. You can find more details about >> native storage domain here: >> >> http://www.ovirt.org/Features/GlusterFS_Storage_Domain rg/mailman/listinfo/users Hello, revamping here.... I'm using oVirt 3.3.3 beta1 after upgrade from 3.3.2 on fedora 19 ovirt beta repo It seems bug referred by Vijay (1017289) is still marked as "assigned", but actually it is for rhel 6. Bug referred by Dan (1022961) is marked as "blocked" but I don't see any particular updates since late november. But it is for rhevm, so I think it is for rhel 6... So what is the situation for fedora 19 and oVirt in upcoming 3.3.3? And upcoming fedora 19/20 and 3.4? I ask because I see that in my qemu command line generated by oVirt there is: for virtio (virtio-blk) disk -drive file=/rhev/data-center/mnt/glusterSD/node01.mydomain:gvdata/d0b96d4a-62aa-4e9f-b50e-f7a0cb5be291/images/a5e4f67b-50b5-4740-9990-39deb8812445/53408cb0-bcd4-40de-bc69-89d59b7b5bc2,if=none,id=drive-virtio-disk0,format=raw,serial=a5e4f67b-50b5-4740-9990-39deb8812445,cache=none,werror=stop,rerror=stop,aio=threads for virtio-scsi disk -drive file=/rhev/data-center/mnt/glusterSD/node01.mydomain:gvdata/d0b96d4a-62aa-4e9f-b50e-f7a0cb5be291/images/c1477133-6b06-480d-a233-1dae08daf8b3/c2a82c64-9dee-42bb-acf2-65b8081f2edf,if=none,id=drive-scsi0-0-0-0,format=raw,serial=c1477133-6b06-480d-a233-1dae08daf8b3,cache=none,werror=stop,rerror=stop,aio=threads So it is referred as mount point and not gluster:// way Also, the output of "mount" command on hypervisors shows: node01.mydomain:gvdata on /rhev/data-center/mnt/glusterSD/node01.mydomain:gvdata type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) and it seems indeed fuse mount, so not using libgfapi... output of "lsof -Pp pid" where pid is the qemu process shows libgfapi....: qemu-syst 2057 qemu mem REG 253,0 99440 541417 /usr/lib64/libgfapi.so.0.0.0 (btw: strange version 0.0.0 for a release.. not so reassuring ;-) # ll /usr/lib64/libgfapi.so.0* lrwxrwxrwx. 1 root root 17 Jan 7 12:45 /usr/lib64/libgfapi.so.0 -> libgfapi.so.0.0.0 -rwxr-xr-x. 1 root root 99440 Jan 3 13:35 /usr/lib64/libgfapi.so.0.0.0 ) At page http://www.gluster.org/category/qemu/ there is a schema about mount types and benchmarks 1) FUSE mount 2) GlusterFS block driver in QEMU (FUSE bypass) 3) Base (VM image accessed directly from brick) ( qemu-system-x86_64 –enable-kvm –nographic -smp 4 -m 2048 -drive file=/test/F17,if=virtio,cache=none => /test is brick directory ) I have not understood if we are in Base (best performance) or FUSE (worst performance) thanks in advance for clarifications and possible roadmaps... Gianluca

3 2

[Users] [QE] oVirt 3.3.3 beta / RC status
by Sandro Bonazzola 17 Jan '14

17 Jan '14

Hi, oVirt 3.3.3 beta has been released and is actually on QA. We'll start composing oVirt 3.3.3 RC on 2014-01-21 12:00 UTC. The bug tracker [1] shows no bugs blocking the release The following is a list of the non-blocking bugs still open with target 3.3 - 3.3.3: Whiteboard Bug ID Summary integration 902979 ovirt-live - firefox doesn't trust the installed engine integration 1021805 [RFE] oVirt Live - use motd to show the admin password integration 1022440 [RFE] AIO - configure the AIO host to be a gluster cluster/host integration 1026930 Package virtio-win and put it in ovirt repositories integration 1026933 pre-populate ISO domain with virtio-win ISO integration 1050084 Tracker: oVirt 3.3.3 release network 997197 Some AppErrors messages are grammatically incorrect (singular vs plural) node 906257 USB Flash Drive install of ovirt-node created via dd fails node 923049 ovirt-node fails to boot from local disk under UEFI mode node 965583 [RFE] add shortcut key on TUI node 976675 [wiki] Update contribution page node 979350 Changes admin password in the first time when log in is failed while finished auto-install node 979390 [RFE] Split defaults.py into smaller pieces node 982232 performance page takes >1sec to load (on first load) node 984441 kdump page crashed before configuring the network after ovirt-node intalled node 986285 UI crashes when no bond name is given node 991267 [RFE] Add TUI information to log file. node 1018374 ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19: Failed on Auto-install node 1018710 [RFE] Enhance API documentation node 1032035 [RFE]re-write auto install function for the cim plugin node 1033286 ovirt-node-plugin-vdsm can not be added to ovirt node el6 base image storage 987917 [oVirt] [glance] API version not specified in provider dialog virt 1007940 Cannot clone from snapshot while using GlusterFS as POSIX Storage Domain Maintainers: - We'll start composing oVirt 3.3.3 RC on 2014-01-21 12:00 UTC: all non blockers bug still open after the build will be moved to 3.3.4. - Please add the bugs to the tracker if you think that 3.3.3 should not be released without them fixed. - Please provide ETA on bugs you add as blockers - Please re-target all bugs you don't think that should block 3.3.3. - Please fill release notes, the page has been created here [3] - Please remember to rebuild your packages before 2014-01-21 12:00 UTC if you want them to be included in 3.3.3 RC. For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug and add yourself to the testing page [2]. Thanks to Gianluca Cecchi for his testing of oVirt 3.3.3 beta on Gluster storage! [1] http://bugzilla.redhat.com/1050084 [2] http://www.ovirt.org/Testing/Ovirt_3.3.3_testing [3] http://www.ovirt.org/OVirt_3.3.3_release_notes Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Users] [QE] oVirt bugzilla updates
by Sandro Bonazzola 17 Jan '14

17 Jan '14

Hi oVirt community, for all people interested in joining QE effort, we've created a new user in bugzilla as default QA assignee: bugs(a)ovirt.org. If you want to be updated on QE bugs activity you can just add that user to your bugzilla account watch list: https://bugzilla.redhat.com/userprefs.cgi?tab=email Watch user list -> add "bugs(a)ovirt.org" Any email sent by bugzilla to that user will be also sent to you. -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Users] VM start Options
by Wolfgang Bucher 17 Jan '14

17 Jan '14

This is a multi-part message in MIME format. Your mail reader does not understand MIME message format. --=_B6gRzuLnmV-Qr05NuONpjAYxCVvEbGdhKKZp2OTxeHP+yFqr Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hello=0D=0AHow can i change VM start from aio=3Dthread to aio=3Dnative=0D= =0A=0D=0AGreetings=C2=A0=0D=0AWolfgang=0D=0A --=_B6gRzuLnmV-Qr05NuONpjAYxCVvEbGdhKKZp2OTxeHP+yFqr Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://ww= w.w3.org/TR/html4/loose.dtd"><html>=0A<head>=0A <meta name=3D"Generator"= content=3D"Zarafa WebApp v7.1.7-42779">=0A <meta http-equiv=3D"Content-= Type" content=3D"text/html; charset=3Dutf-8">=0A <title>VM start Options= </title>=0A</head>=0A<body>=0A<font face=3D"tahoma" size=3D"2">Hello</fon= t><div><font face=3D"tahoma" size=3D"2">How can i change VM start from ai= o=3Dthread to aio=3Dnative</font></div><div><font face=3D"tahoma" size=3D= "2"><br></font></div><div><font face=3D"tahoma" size=3D"2">Greetings&nbsp= ;</font></div><div><font face=3D"tahoma" size=3D"2">Wolfgang</font></div>= =0A</body>=0A</html> --=_B6gRzuLnmV-Qr05NuONpjAYxCVvEbGdhKKZp2OTxeHP+yFqr--

5 4

[Users] Horrid performance during disk I/O
by Blaster 17 Jan '14

17 Jan '14

This probably more appropriate for the qemu users mailing list, but that list doesn’t get much traffic and most posts go unanswered… As I’ve mentioned in the past, I’m migrating my environment from ESXi to oVirt AIO. Under ESXi I was pretty happy with the disk performance, and noticed very little difference from bare metal to HV. Under oVirt/QEMU/KVM, not so much…. Running hdparm on the disk from the HV and from the guest yields the same number, about 180MB/sec (SATA III disks, 7200RPM). The problem is, during disk activity, and it doesn’t matter if it’s Windows 7 guests or Fedora 20 (both using virtio-scsi) the qemu-system-x86 process starts consuming 100% of the hypervisor CPU. Hypervisor is a Core i7 950 with 24GB of RAM. There’s 2 Fedora 20 guests and 2 Windows 7 guests. Each configured with 4 GB of guaranteed RAM. Load averages can go up over 40 during sustained disk IO. Performance obviously suffers greatly. I have tried all combinations of having the guests on EXT 4, BTRFS and using EXT 4 and BTRFS inside the guests, as well as direct LUN. Doesn’t make any difference. Disk IO sends qemu-system-x86 to high CPU percentages. This can’t be normal, so I’m wondering what I’ve done wrong. Is there some magic setting I’m missing?

6 7

[Users] VirtIO disk latency
by Markus Stockhausen 17 Jan '14

17 Jan '14

This is a multi-part message in MIME format. ------=_NextPartTM-000-e5c11ff1-4bb3-4471-9f08-8adebae2667b Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hello,=0A= =0A= coming from the "low cost NFS storage thread" I will open a new one=0A= about a topic that might be interesting for others too.=0A= =0A= We see a quite a heavy latency penalty using KVM VirtIO disks in comparison= =0A= to ESX. Doing one I/O onto disk inside a VM usually adds 370us of overhead = in=0A= the virtualisation layer. This has been tested with VirtIO-SCSI and windows= =0A= guest (2K3). More here (still now answer yet):=0A= =0A= http://lists.nongnu.org/archive/html/qemu-discuss/2013-12/msg00028.html=0A= =0A= A comparison for small sequential 1K I/Os on a NFS datastore in our setup g= ives:=0A= =0A= - access NFS inside the hypervisor - 12.000 I/Os per second - or 83us laten= cy =0A= - access DISK inside ESX VM that resides on NFS - 8000 I/Os per second - or= 125us latency=0A= - access DISK inside OVirt VM that resides on NFS - 2200 I/Os per second - = or 450us latency=0A= =0A= Even the official document at http://www.linux-kvm.org/page/Virtio/Block/La= tency=0A= suggest that the several mechanisms (iothread/vcpu) at least have a overhea= d=0A= of more than 200us=0A= =0A= Has anyone experienced something simlar. If these latency are normal it wou= ld =0A= make no sense to think about SSDs inside a central storage (be it ISCSI or = NFS =0A= or whatever).=0A= =0A= Markus=0A= =0A= ------=_NextPartTM-000-e5c11ff1-4bb3-4471-9f08-8adebae2667b Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-e5c11ff1-4bb3-4471-9f08-8adebae2667b--

3 3

Re: [Users] Attach NFS storage to multiple datacenter
by Amedeo Salvati 16 Jan '14

16 Jan '14

Il 16/01/2014 18:00, users-request(a)ovirt.org ha scritto: > From: "Tobias Fiebig"<mail(a)wybt.net> > To: "Elad Ben Aharon"<ebenahar(a)redhat.com> > Cc:"Users(a)ovirt.org List" <Users(a)ovirt.org> > Sent: Thursday, January 16, 2014 6:37:24 PM > Subject: Re: [Users] Attach NFS storage to multiple datacenter > > Heho, > On Thu, 2014-01-16 at 11:10 -0500, Elad Ben Aharon wrote: >> >You don't have to attach/detach the domain for every VM export. Sorry for not being clear. You can export all your VMs to the export domain at once and then detach the export domain and attach it to the second DC. > May have miscommunicated that... > I can not do this because this kind of means that the vms will be down > during the whole movement process. I'd like to reduce the per-vm > downtime as much as possible. > > With best Regards, > Tobias you can decrease the downtime by: - live snapshot VM1; - clone VM1 from snapshot to VM1-NEW (during this process VM1 is up&running); - export VM1-NEW to export domain (VM1 up&running); - detach export domain from old DC; - attach export domain to new DC; - import VM1-NEW (VM1 still up&running); - start VM1-NEW on single mode and configure; - stop apps from VM1 (downtime); - optionally sync app data from VM1 to VM1-NEW (downtime); - start apps on VM1-NEW (apps up&running on new DC). - stop VM1 on old DC. HTH a -- Amedeo Salvati RHC{DS,E,VA} - LPIC-3 - UCP - NCLA 11 email: amedeo(a)oscert.net email: amedeo(a)linux.com http://plugcomputing.it/redhatcert.php http://plugcomputing.it/lpicert.php

1 0

[Users] Management server
by Koen Vanoppen 16 Jan '14

16 Jan '14

Dear All, Our setup at work now is: 1 management server and 7 hyper visors. All the systems have centos 6.4 on it. Now my question is: Because of the fact that all the systems have centos on it, we can't use the reports portal and the dwh-portal. Would it be possible to add a second management server to our already existing setup (fedora 19), without !*breaking*! our existing setup, so this one can provide us with the reports and dwh-portal and can also serve as a "Back-Up" management server. If so, how do we handle this? Kind regards, Koen

3 2

[Users] oVirt 3.3.3 beta is now available
by Sandro Bonazzola 16 Jan '14

16 Jan '14

The oVirt team is pleased to announce that the 3.3.3 Beta is now available in beta [1] repository for testing. Feel free to join us testing it! You'll find all needed info for installing it on the release notes page, already available on the wiki [2]. A new oVirt Node build will be available soon as well. [1] http://resources.ovirt.org/releases/beta/ [2] http://www.ovirt.org/OVirt_3.3.3_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

[Users] ovirt-engine-reports rpm for CentOS and oVirt 3.3
by Nicolas Ecarnot 16 Jan '14

16 Jan '14

Good morning or whenever, I read what RPM I have to install here http://www.ovirt.org/Ovirt_Reports but I can not find any RPM for CentOS 6. I strongly searched around the web and in the different repo folders, as well as in the mailing list msgs, and it seems the production of RPM for CentOS has been disabled for whatever reason. Is there a private recipe to create them or get them an unofficial way (reports, dwh, jasperreports...) Thank you. -- Nicolas Ecarnot

3 4

[Users] oVirt node - network config not persisted
by Federico Alberto Sayd 16 Jan '14

16 Jan '14

Hello: I have been testing some hosts with ovirt-node (3.0.1-1.0.2.el6) and when I reboot the node the network config is not persisted. I have seen that this was commented in this list, some time ago. Was this fixed in 3.0.3-1 release? There is a 3.0.3-1.1 image in http://resources.ovirt.org/releases/3.3/iso/, but is only Fedora Core. No el6/Centos image? Thank you Federico

3 2

[Users] [QE] 3.4.0 Release tracker
by Sandro Bonazzola 16 Jan '14

16 Jan '14

Hi, as you may know, we're planning to build oVirt 3.4.0 beta really soon and release 3.4.0 by end of January. A tracker bug (https://bugzilla.redhat.com/show_bug.cgi?id=1024889) has been created for this release. The following is a list of the current blocker bugs with target 3.4.0: Whiteboard Bug ID Summary storage 1032686 [RFE] API to save OVF on any location storage 1032679 [RFE] Single Disk Snapshots network 987813 [RFE] report BOOTPROTO and BONDING_OPTS independent of netdevice.cfg The following is a list of the bugs with target 3.4.0 not yet fixed: Whiteboard Bug ID Summary gluster 1008980 [oVirt] Option 'Select as SPM' available for a host in gluster-only mode of oVirt gluster 1038988 Gluster brick sync does not work when host has multiple interfaces i18n 1033730 [es-ES] need to revise the "create snapshot" translation infra 870330 Cache records in memory infra 904029 [engine-manage-domains] should use POSIX parameter form and aliases as values infra 979231 oVirt Node Upgrade: Support N configuration infra 986882 tar which is used by host-deploy is missing from fedora minimal installation infra 995362 [RFE] Support firewalld infra 1016634 Performance hit as a result of duplicate updates to VdsDynamic in VdsUpdateRuntimeInfo infra 1023751 [RFE] Create Bin Overrider for application context files changes we do in JRS infra 1023754 [RFE] add trigger to stop etl connection via engine db value. infra 1023759 [RFE] re-implement SSO solution based on JRS new SSO interface infra 1023761 [RFE] Build nightly JRS builds based on latest JRS version infra 1028793 systemctl start vdsmd blocks if dns server unreachable infra 1032682 Refactor authentication framework in engine infra 1035844 [oVirt][infra] Add host/Reinstall radio button text not actionable infra 1045350 REST error during VM creation via API infra 1046611 [oVirt][infra] Device custom properties syntax check is wrong integration 789040 [RFE] Log Collector should be able to run without asking questions integration 967350 [RFE] port dwh installer to otopi integration 967351 [RFE] port reports installer to otopi integration 1023752 [RFE] add upstream support for Centos el6 arch. integration 1024028 [RFE] add trigger to stop etl connection via engine db value. integration 1028489 [RFE] pre-populate ISO DOMAIN with rhev-tools-setup.iso (or equiv) integration 1028913 'service network start' sometimes fails during setup integration 1037663 F20 - ovirt-log-collector: conflicts with file from package sos-3.0-3.fc20.noarch integration 1039616 Setting shmmax on F19 is not enough for starting postgres network 987832 failed to add ovirtmgmt bridge when the host has static ip network 1001186 With AIO installer and NetworkManager enabled, the ovirtmgmt bridge is not properly configured network 1010663 override mtu field allows only values up to 9000 network 1018947 Yum update to oVirt 3.3 from 3.1.0 fails on CentOS 6.4 with EPEL dependency on python-inotify network 1037612 [oVirt][network][RFE] Add "sync" column to hosts sub tab under networks main tab network 1040580 [RFE] Apply networks changes to multiple hosts network 1040586 [RFE] Ability to configure network on multiple hosts at once network 1043220 [oVirt][network][RFE] Add Security-Group support for Neutron based networks network 1043230 Allow configuring Network QoS on host interfaces network 1044479 Make an iproute2 network configurator for vdsm network 1048738 [oVirt][network][RFE] Add subnet support for neutron based networks network 1048740 [oVirt][network][RFE] Allow deleting Neutron based network (in Neutron) network 1048880 [vdsm][openstacknet] Migration fails for vNIC using OVS + security groups sla 994712 Remove underscores for pre-defined policy names sla 1038616 [RFE] Support for hosted engine storage 888711 PosixFS issues storage 961532 [RFE] Handle iSCSI lun resize storage 1009610 [RFE] Provide clear warning when SPM become inaccessible and needs fencing storage 1034081 Misleading error message when adding an existing Storage Domain storage 1038053 [RFE] Allow domain of multiple types in a single Data Center storage 1045842 After deleting image failed ui display message: Disk gluster-test was successfully removed from... ux 784779 [webadmin][RFE] Login page. Add a link to welcome page ux 1014859 [RFE] improve context-sensitive help csv mapping files ux 1035566 [RFE] [oVirt][webadmin] Change comment column title to icon, and move to right of name ux 1048916 sub-tab events in different main-tabs are being duplicated virt 953340 console from rhevm-shell/ovirt-shell using spicec does not work (linux client) virt 975730 [RFE] pass session id to spice via mime type to allow spice Menu Using REST virt 987957 [RFE] edit VM dialog - nics appear in random order (not sorted by name) virt 1031040 [RFE] RunOnce dialog can not set a vnc keymap itself virt 1033547 [RFE] Configure both SPICE and VNC display console virt 1035279 Allow to disable SSO per VM virt 1038587 Show name of the template in General tab for a vm if the vm is deployed from template via clone allocation. virt 1040088 [RFE] Add FreeBSD to the list of VM operating systems virt 1043469 ovirt-guest-agent for openSUSE virt 1043471 ovirt-guest-agent for SLES virt 1043473 ovirt-guest-agent for Ubuntu virt 1043474 ovirt-guest-agent for Debian 753296 [RFE] Enable FIPS mode 753306 SR-IOV support 753309 [RFE] Workaround for enable/disable services via persist cmd 806317 [RFE] ovirt-node regenerates kdump ramdisk image on every boot 832000 Reduce number of kargs to enable a better automated installation with PXE 846963 [oVirt-node] Upgrade ovirt-node with "ovirt_upgrade" parameter failed 850386 Introduce new systemd-rpm macros in ovirt-node spec file 893950 Make ovirt-node more FHS 908902 Add specififc log handlers (log files) for transactions and ui 909369 Use blivet during installation 918270 Refactor and isolate block device discovery 918957 [TUI] Confirmation for reboot 947406 Add notice field 947407 Status of caps-lock should be shown near password fields 953870 Migrate to livemedia-creator 966320 ovirt node will also enable ipv4 with dhcp protocol when only setting ipv6 with dhcp 966498 Change sensitivity of widgets recursively 969340 Migrate ovirt-node-installer backend and ovirt-auto-install backend to new code base 974609 Add correct suffixes to scripts 979067 [RFE] Add generic container handling 979078 [RFE] <RETURN> can be used to Save a page 979389 [RFE] use asciidoc for man pages 980064 [RFE] Add mouse support to the console 987824 [RFE] Need to add roll up and down ability to mouse control in multipage 988337 Shown incorrect info for the item "VLAN ID" after configured nic with "vlan". 988341 Should not create bond when report an error in configuration process 995994 Could not add Fedora host when its version becomes "oVirt Node Hypervisor" 997049 Allow nested transactions 1001947 KeyboardInterrupt Exception when click mouse on UI 1001950 RFE: same action on all ovirt-node-install page for press enter 1002176 Not enough debugging informations in log files 1002620 [RFE] Create central augeas object 1003234 password.py: Using "set_admin_password" to change admin password failed in single mode 1005148 [RFE] Add documentation on how to deploy Node with Puppet/Foreman 1007191 RFE: Support "BOOTIF=bondname" in auto-install parameters 1008891 Installer goes to next page after returning from shell 1011901 Report traceback infos about errors when starting ntpdate, rpcidmapd and rpcgssd services ... 1013520 Miss some console info to show status by using "ovirt-node-upgrade" to upgrade ovirt-node 1020227 /var/log/lastlog is missing 1021647 Shared configuration keys to pass management informations 1026646 Better to disable "enter" button works for the fan status table of ipmi page 1027110 Better to disable cim transaction run and prompt ConfirmationDialog when configuring cim without providing password 1027130 edit-node: Better to rename iso_name more simpler when install multiple packages 1027161 plugin info shown incorrectly in plugins page when install multiple packages 1029033 Link status shows disconnected although the cable is plugged. 1032373 [RFE] enhance edit-node man page for uid/gid options help info a bit more 1032374 [RFE] edit-node:Support specify multiple user, uid/group, gid elements changed 1035441 [RFE] Sync versions between ovirt-node and overall ovirt Please set the target to 3.4.0 and add the bug to the tracker if you think that 3.4.0 should not be released without it fixed. Please also update the target to 3.4.1 or any next release for bugs that won't be in 3.4.0: it will ease gathering the blocking bugs for next releases. For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug. -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

9 21

[Users] Stuck VM on Migration To
by Carlo Turco 16 Jan '14

16 Jan '14

Hello guys. I´m using 3.2 ovirt and suddenly one of my VM started to migrate. The problem is that it´s is Stuck in this process and I can not do nothing on it. I take a look on engine.log and there is nothing there showing a problem, if a try to cancel migration, it says "2014-01-15 10:08:37,129 WARN [org.ovirt.engine.core.bll.CancelMigrateVmCommand] (ajp--127.0.0.1-8702-3) CanDoAction of action CancelMigrateVm failed. Reasons:VAR__TYPE__VM,VAR__ACTION__CANCEL_MIGRATE,VM_CANNOT_CANCEL_MIGRATION_WHEN_VM_IS_NOT_MIGRATING" Suspend "2014-01-15 10:10:32,041 WARN [org.ovirt.engine.core.bll.HibernateVmCommand] (ajp--127.0.0.1-8702-7) CanDoAction of action HibernateVm failed. Reasons:ACTION_TYPE_FAILED_VM_IS_NOT_UP,VAR__TYPE__VM,VAR__ACTION__HIBERNATE" Run "2014-01-15 10:11:13,244 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-50) [1c8495ae] Vm Running failed - vm 68a11fa4-f3b8-430a-af02-0beaa293f49c:core-mag already running, status MigratingTo" What can I do? Best wishes Carlo Turco

2 1

[Users] VM locked - snapshot deletion
by Neil Schulz 15 Jan '14

15 Jan '14

I tried creating a snapshot and it failed. I attempted to create another snapshot and it failed as well. I shutdown the VM and tried creating a snapshot, which failed as well. I went to the Snapshot tab and seen the failed snapshots show up and have the Status OK. I tried to delete a snapshot but it is now hung as Locked. I cannot do anything with this virtual machine now. I see this throughout the engine.log: INFO [org.ovirt.engine.core.bll.CommandMultiAsyncTasks] (DefaultQuartzScheduler_Worker-84) Task with DB Task ID 752072ed-444b-4e17-b7ff-f5b673b4c4bc and VDSM Task ID 98fa364e-38d7-422b-8126-1321f29908a9 is in state Polling. End action for command 77662498-d73d-48d7-b9c3-21b53e2673ba will proceed when all the entitys tasks are completed. Anyone know a fix for this? Thank you, Neil

1 1

Re: [Users] ovirt-shell limited to first 100 elements
by Amedeo Salvati 15 Jan '14

15 Jan '14

> Date: Wed, 15 Jan 2014 14:09:19 +0100 From: Joop <jvdwege(a)xs4all.nl> > To: users(a)ovirt.org Subject: Re: [Users] ovirt-shell limited to first > 100 elements Message-ID: > <b0dc271d-09a3-40cc-b9f3-722dd7c05924(a)email.android.com> Content-Type: > text/plain; charset=UTF-8 Amedeo Salvati <amedeo(a)oscert.net> wrote: >> >Does anyone know if there are a possibility to increment list elements >> >on ovirt-shell? >> > > I think ovirt-shell has a paginate option, try --help > > Joop was the first search... so I resolved setting "autopage = False" on .ovirtshellrc file regards a -- Amedeo Salvati RHC{DS,E,VA} - LPIC-3 - UCP - NCLA 11 email: amedeo(a)oscert.net email: amedeo(a)linux.com http://plugcomputing.it/redhatcert.php http://plugcomputing.it/lpicert.php

1 0

[Users] FOSDEM reminder
by Doron Fediuck 15 Jan '14

15 Jan '14

Hi everyone, just a reminder, we have this Etherpad with all the relevant information on our FOSDEM plans: http://etherpad.ovirt.org/p/ovirt-fosdem-14 You can also join the events we created in FB: https://www.facebook.com/events/593033774106561/ G+: https://plus.google.com/u/0/events/cm89k6scm67ivmqca7596nq7f2g Feel free to add yourself to the stand shift. Also, if you'd like to come to the oVirt meet-up, please put your name in the list. See you all in FOSDEM!

2 2

Re: [Users] Fwd: Re: Help: Problem uploading the ISO file on engine
by David Li 15 Jan '14

15 Jan '14

The ovirt-iso-uploader log only has one line: 2014-01-13 19:08:05::INFO::engine-iso-uploader::1067::root:: Start uploading CentOS-6.4-x86_64-netinstall.iso This is version 3.3.2-1.el6 My immediate question is how I can kill the upload process without rebooting the engine box? So I can try to reproduce the problem again. It's probably in a "sleep but not interrupt" state. None of the usual kill -9 commands worked. My NFS ISO domain has also been put in the "inactive" state most likely due to this problem. Thanks. David ----- Original Message ----- > From: Sandro Bonazzola <sbonazzo(a)redhat.com> > To: david_li(a)sbcglobal.net > Cc: > Sent: Tuesday, January 14, 2014 2:05 AM > Subject: Fwd: Re: [Users] Help: Problem uploading the ISO file on engine > > > > > -------- Messaggio originale -------- > Oggetto: Re: [Users] Help: Problem uploading the ISO file on engine > Data: Tue, 14 Jan 2014 11:04:37 +0100 > Mittente: Sandro Bonazzola <sbonazzo(a)redhat.com> > A: Sven Kieske <S.Kieske(a)mittwald.de>, "users(a)ovirt.org" > <users(a)ovirt.org> > > Il 14/01/2014 08:32, Sven Kieske ha scritto: >> Hi, >> >> which engine version? >> anything in engine.log? > > +1 > >> (I honestly don't know if there's any logging >> for the iso uploader?). > > yes there is, in /var/log/ovirt-iso-uploader dir. > >> >> I never encountered such a problem. > > Same here. Can you reproduce using -v flag when running iso uploader? > > > >> >> HTH >> >> Am 13.01.2014 20:45, schrieb David Li: >>> Hi, >>> >>> I copied a Centos netinstall ISO file to a directory on my engine > machine to get ready for installation. Then I used >>> >>> engine-iso-uploader upload -i ISO_DOMAIN > CentOS-6.4-x86_64-netinstall.iso >>> >>> to upload or put it into the proper ISO domain directory. However this > command now totally stuck. Even kill -9 won't be able to do anything. > Moreover now my ISO domain in the DC seems dead or becomes inactive too. >>> >>> What happened? Is there any way to recover from this point without > rebooting everything? >> > > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community collaboration. > See how it works at redhat.com >

3 3

[Users] Showing stacktrace info in GUI error dialog
by Einav Cohen 15 Jan '14

15 Jan '14

Hi, this is about patch [1] - showing server-side-exception stacktrace info in GUI error dialog. a couple of notes about this patch: (1) I find it a little strange that server-side exceptions are not logged in the server side and are / will be displayed only on the client-side - this needs to be fixed first. (2) once everything is logged on the server side, we can debate whether it makes sense to put the full exception stack-trace *also* in the GUI error pop-up. I think that it is not completely necessary (since if there is a server side exception, the user is likely to go to the server side log anyway to get the full picture / context), but if it is (and I'd like to hear your opinion about that) - we shouldn't show the entire exception in the dialog once the dialog is displayed - that's too much information to absorb. We should show whatever we are showing today, and also something like a "More Details" collapsible section (collapsed by default) that, when expanded, displays the full exception details. comments are welcome. ---- Thanks, Einav [1] http://gerrit.ovirt.org/#/c/23096/

4 4

[Users] ovirt-shell limited to first 100 elements
by Amedeo Salvati 15 Jan '14

15 Jan '14

Does anyone know if there are a possibility to increment list elements on ovirt-shell? Because I'm trying to list disk on one storagedomain but it list me only first 100 elements. e.g.:list disks storagedomains-identifier STORNAME | egrep '^name' > /root/disks-name-on-STORNAME.txt p.s I faund on http://comments.gmane.org/gmane.comp.emulators.ovirt.infra/3050 that for python api there is an option to pass to "list" function: api.vms.list(max=200) but I cannot find equivalent for ovirt-shell Best regards a

2 1

[Users] [QE] oVirt 3.3.3 beta status
by Sandro Bonazzola 15 Jan '14

15 Jan '14

we're going to branch and build oVirt 3.3.3 beta on Monday 2014-01-13. A bug tracker is available at [1] and it shows no bugs blocking the release the following has been proposed as blocker for 3.3.3 or 3.4.0, not targeted to a specific version yet: Bug 1035314 - vdsm-hook-nestedvt uses kvm_intel-only syntax The following is a list of the non-blocking bugs still open with target 3.3.3: Whiteboard Bug ID Summary Whiteboard Bug ID Summary infra 987982 When adding a host through the REST API, the error message says that "rootPassword" is required... infra 1017267 Plaintext user passwords in async_tasks database infra 1040022 vdsm-tool configurre errors when installing vdsm package integration 902979 ovirt-live - firefox doesn't trust the installed engine integration 1021805 [RFE] oVirt Live - use motd to show the admin password integration 1022440 [RFE] AIO - configure the AIO host to be a gluster cluster/host integration 1026930 Package virtio-win and put it in ovirt repositories integration 1026933 pre-populate ISO domain with virtio-win ISO network 906313 [oVirt-webadmin] [setupNetworks] "No valid Operation for <network_name> and Unassigned Logical Networks panel" network 987916 [oVirt] [provider] Dialog doesn't update unless focus lost network 997197 Some AppErrors messages are grammatically incorrect (singular vs plural) network 1023722 [oVirt-webadmin][network] Network roles in cluster management should be radio buttons sla 1049343 [oVirt] Disabled Balloon in Add Vm storage 987917 [oVirt] [glance] API version not specified in provider dialog ux 906394 [oVirt-webadmin] [network] Loading animation in network main tab 'hosts' and 'vms' subtab is stuck... virt 1007940 Cannot clone from snapshot while using GlusterFS as POSIX Storage Domain 906257 USB Flash Drive install of ovirt-node created via dd fails 923049 ovirt-node fails to boot from local disk under UEFI mode 965583 [RFE] add shortcut key on TUI 976675 [wiki] Update contribution page 979350 Changes admin password in the first time when log in is failed while finished auto-install 979390 [RFE] Split defaults.py into smaller pieces 982232 performance page takes >1sec to load (on first load) 984441 kdump page crashed before configuring the network after ovirt-node intalled 986285 UI crashes when no bond name is given 991267 [RFE] Add TUI information to log file. 1018374 ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19: Failed on Auto-install 1018710 [RFE] Enhance API documentation 1032035 [RFE]re-write auto install function for the cim plugin 1033286 ovirt-node-plugin-vdsm can not be added to ovirt node el6 base image Maintainers: Please add the bugs to the tracker if you think that 3.3.3 should not be released without them fixed. Please re-target all bugs you don't think that should block 3.3.3. For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug and add yourself to the testing page [2]. Maintainers are welcomed to start filling release notes, the page has been created here [3] [1] http://bugzilla.redhat.com/1050084 [2] http://www.ovirt.org/Testing/Ovirt_3.3.3_testing [3] http://www.ovirt.org/OVirt_3.3.3_release_notes Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 2