- Users - oVirt List Archives

Re: [Users] Host installation problems. Brigde
by Christer Olsen 13 Mar '13

13 Mar '13

Does anyone have a clue what i might need to do ? On Tue, Mar 12, 2013 at 4:12 PM, Christer Olsen <christer.r.olsen(a)gmail.com>wrote: > Does anyone have a clue what i might need to do ? > > > > > On Mon, Mar 11, 2013 at 4:55 PM, Christer Olsen < > christer.r.olsen(a)gmail.com> wrote: > >> Here is the complete log file. >> >> http://pastebin.com/5VYg4DFs >> >> >> On Mon, Mar 11, 2013 at 10:31 AM, Antoni Segura Puimedon < >> asegurap(a)redhat.com> wrote: >> >>> >>> >>> ----- Original Message ----- >>> > From: "Dan Kenigsberg" <danken(a)redhat.com> >>> > To: "Christer Olsen" <christer.r.olsen(a)gmail.com> >>> > Cc: users(a)ovirt.org >>> > Sent: Monday, March 11, 2013 10:18:13 AM >>> > Subject: Re: [Users] Host installation problems. Brigde >>> > >>> > On Sun, Mar 10, 2013 at 07:30:15PM +0100, Christer Olsen wrote: >>> > > I'm having issues with installing host in oVirt. >>> > > >>> > > >>> > > Manager reports: >>> > > Failed to install Host localhost. Step: SetNetworking; Details: >>> > > addNetwork >>> > > error trying to add management bridge. >>> > >>> > Which version of ovirt are you using? ovirt-3.2 should be using >>> > ovirt-host-deploy, which has differently-looking logs, and hopefully >>> > less bugs. >>> >>> According to the repo he listed, ovirt-3.1, as seen in: >>> >>> http://dev.centos.org/centos/6/ovirt/x86_64/RPMS/ >>> >>> > >>> > > >>> > > >>> > > *** LOG *** >>> > > >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 517 getAddress Entry. >>> > > url= >>> > > http://10.1.1.30:22020/Components/vds/ >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 539 getAddress >>> > > return. >>> > > address=10.1.1.30 port=22020 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 957 makeBridge begin. >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 424 _getMGTIface: >>> > > read host >>> > > name: 10.1.1.30 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 431 _getMGTIface: >>> > > using host >>> > > name 10.1.1.30 strIP= 10.1.1.30 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 437 _getMGTIface >>> > > IP=10.1.1.30 >>> > > strIface=eth0 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 997 makeBridge found >>> > > the >>> > > following bridge paramaters: ['NAME=', 'BOOTPROTO=dhcp', $ >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 135 >>> > > ['/usr/share/vdsm/addNetwork', 'ovirtmgmt', '', '', 'eth0', >>> > > 'NAME=', >>> > > 'BOOTPROT$ >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 143 Specified netmask >>> > > or >>> > > gateway but not ip >>> > > >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 144 >>> > > WARNING:root:options >>> > > IPADDR is deprecated. Use ipaddr instead >>> > > WARNING:root:options NETMASK is deprecated. Use netmask instead >>> > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead >>> > > WARNING:root:options ONBOOT is deprecated. Use onboot instead >>> > > Traceback (most recent call last): >>> > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> >>> > > main() >>> > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main >>> > > addNetwork(bridge, **kwargs) >>> > > File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork >>> > > bridged=bridged, **options) >>> > > File "/usr/share/vdsm/configNetwork.py", line 823, in >>> > > _addNetworkValidation >>> > > "Specified netmask or gateway but not ip") >>> > > ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') >>> > > >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1037 makeBridge >>> > > Failed to add >>> > > ovirtmgmt bridge out=Specified netmask or gateway bu$ >>> > > >>> > > err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead >>> > > WARNING:root:options NETMASK is deprecated. Use netmask instead >>> > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead >>> > > WARNING:root:options ONBOOT is deprecated. Use onboot instead >>> > > Traceback (most recent call last): >>> > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> >>> > > main() >>> > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main >>> > > addNetwork(bridge, **kwargs) >>> > > File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork >>> > > bridged=bridged, **options) >>> > > File "/usr/share/vdsm/configNetwork.py", line 823, in >>> > > _addNetworkValidation >>> > > "Specified netmask or gateway but not ip") >>> > > ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') >>> > > >>> > > ret=22 >>> > > Sun, 10 Mar 2013 19:19:30 ERROR deployUtil 1052 makeBridge >>> > > errored: >>> > > out=Specified netmask or gateway but not ip >>> > > >>> > > err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead >>> > > WARNING:root:options NETMASK is deprecated. Use netmask instead >>> > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead >>> > > WARNING:root:options ONBOOT is deprecated. Use onboot instead >>> > > Traceback (most recent call last): >>> > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> >>> > > main() >>> > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main >>> > > addNetwork(bridge, **kwargs) >>> > > File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork >>> > > bridged=bridged, **options) >>> > > File "/usr/share/vdsm/configNetwork.py", line 823, in >>> > > _addNetworkValidation >>> > > "Specified netmask or gateway but not ip") >>> > > ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') >>> > > >>> > > ret=22 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1055 makeBridge >>> > > return. >>> > > Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 729 addNetwork >>> > > error >>> > > trying to add management bridge >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 278 <BSTRAP >>> > > component='SetNetworking' status='FAIL' message='addNetwork error >>> > > t$ >>> > > Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 1023 setNetworking >>> > > test >>> > > failed >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1140 <BSTRAP >>> > > component='RHEV_INSTALL' status='FAIL'/> >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1142 **** End VDS >>> > > Validation **** >>> > > >>> > > >>> > > *** END LOG *** >>> > > >>> > > >>> > > >>> > > I have tried googling myself to an answer, and i have tried finding >>> > > it out >>> > > myself but with no luck. >>> > > >>> > > >>> > > (the host is the same one as the engine is running on) >>> > > >>> > > Please, any help would be appreciated. >>> > > >>> > > >>> > > Kind regards >>> > >>> > > _______________________________________________ >>> > > Users mailing list >>> > > Users(a)ovirt.org >>> > > http://lists.ovirt.org/mailman/listinfo/users >>> > >>> > _______________________________________________ >>> > Users mailing list >>> > Users(a)ovirt.org >>> > http://lists.ovirt.org/mailman/listinfo/users >>> > >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> >> >

4 9

[Users] HowTo: Spice ActiveX Plugin/Virt Viewer Console on oVirt 3.1
by Dead Horse 13 Mar '13

13 Mar '13

I have seen this question asked many times on this list and the spice-devel list. Now having figured out how to make it work I will provide the answer to the rest of the community. *NOTE* this only applies to Windows/Internet Explorer users. There exists no other option other than the html5 spice console (still beta/in development) for windows users ATM. This will also only work with Internet Explorer. Basic Steps: - Install an oVirt server. - Add at least one node - Setup storage/iso/export domains Advanced steps - Start by downloading: http://elmarco.fedorapeople.org/spice.cab - Create a directory for it oVirt looks by default in /usr/share/spice - Rename spice.cab to SpiceX.cab and copy it into /usr/share/spice - Now edit /usr/share/ovirt-engine/engine.ear/root.war/WEB-INF and add the following:  <servlet> <servlet-name>SpiceX.cab</servlet-name> <servlet-class>org.ovirt.engine.core.FileServlet</servlet-class> <init-param> <param-name>type</param-name> <param-value>application/octet-stream</param-value> </init-param> <init-param> <param-name>file</param-name> <param-value>/usr/share/spice/SpiceX.cab</param-value> </init-param> </servlet> <servlet-mapping> <servlet-name>SpiceX.cab</servlet-name> <url-pattern>/spice/SpiceX.cab</url-pattern> </servlet-mapping> - Next create an html file within /usr/share/ovirt-engine/engine.ear/root.war - In the example below an html file called "spice.html" - Copy/Paste the below into spice.html: <!DOCTYPE html> <html> <head> <title>SPICE Plugin Installer</title> <script type="text/javascript"> function installSpice() { try { document.getElementById('SpiceX').innerHTML = '<OBJECT id="SpiceX" codebase="/spice/SpiceX.cab" classid="clsid:ACD6D89C-938D-49B4-8E81-DDBD13F4B48A" width="0" height="0"></OBJECT>'; } catch (ex) { alert("Epic Fail!: " + ex.Description); } } </script> </head> <body> <p> <p><b id='SpiceX'>Spice ActiveX Plugin</b> </p> <button onclick='installSpice()'>Install Spice Plugin</button> </p> </body> </html> - Save the file - You will now need to restart the ovirt-engine service EG: systemctl restart ovirt-engine.service OR service ovirt-engine restart - The installer page will now be available at http://<url to ovirt server>/spice.html EX: http://ovirt.azeroth.net/spice.html - Navigate to that page and click the install button - IE will prompt you to deploy/install the SpiceX cabinet file - It may gripe about an unsigned or untrusted source, acknowledge this an proceed anyways - If the install succeeds the text "Spice ActiveX Plugin" on the page will change to blank (it's actually the plugin with null values) - The console button in the user and webadmin portals will now launch the new virt-viwer spice based console! Happy Spice Consoling to your VM's from Windows! *NOTE* To uninstall the plugin: - The below removes the add-on from IE (EG: removes knowledge of "application/x-spice") - pop a command terminal and type: On Windows XP: regsvr32 /u "C:\Documents and Settings\Administrator\Local Settings\Application Data\virt-viewer\bin\SpiceX.dll" On Windows 7 regsvr32 /u C:\Documents and Settings\Administrator\Local Settings\AppData\virt-viewer\bin\SpiceX.dll" - Next we need to remove the rest of virt-viewer - Go to add/remove programs and uninstall virt-viewer, this removes the rest of virt-viewer from the system

7 21

[Users] Failed to add gluster server
by suporte＠logicworks.pt 13 Mar '13

13 Mar '13

Hi, I just installed oVirt 3.2 than add a node 1 using fedora18, attach an iSCSI storage, and local ISO NFS, and the data center is alive. Than try to add a second node from the ISO ovirt-node-iso-2.6.1-20120228.fc18.iso, but get this error message: Failed to add gluster server node2.domain.com into cluster default. Gluster command[gluster peer probe 192.168.5.182] failed on server 192.168.5.181 On the second node I configured Optional password for adding Node through oVirt Engine UI On the engine when adding a new Host I add the values to Name, Address, and Root Password , and than get this error: Error: Cannot add host. SSH authentication failed, verify authentication parameters are correct (Username/password, public key etc). You may refer to the engine.log file for further details. I notice that I cannot login as root on the second node, so how can I add a node through oVirt Engine UI if it asks for a root password? What am I doing wrong? thanks

2 1

[Users] Possible migration from oVirt to RHEV?
by Bashar 12 Mar '13

12 Mar '13

Hello, Doing some RnD and was wondering if it's possible to move from Fedora/oVirt to RHEL/RHEV anytime in future for a production system if required. >From the technical possibility point of view. Thanks, -B

5 5

[Users] CFP reminder for Shanghai
by Theron Conrey 12 Mar '13

12 Mar '13

one or two folks have commented on the fact they didn't see the last CFP email that was sent out. I thought I'd repost it here. I'm looking forward to getting some more submissions and we hope that we'll see you in Shanghai! ---------------------- Hi Everyone, We are actively seeking speakers for the oVirt workshop which will be held on Intel's Shanghai Campus, 8-9 May 2013. We are interested in talks in the following areas: * Getting started developing oVirt * oVirt for the systems administrator * Where oVirt fits in the enterprise * Gluster Integration * leveraging oVirt for Gluster deployments * Case studies on cost savings with oVirt and Open Source data center virtualization * Troubleshooting oVirt * Hardware optimizations for virtualization * oVirt Plugin development * oVirt architecture from a security and best practices point of view. * oVirt Project Roadmaps * Deep dives into features/areas * Deep dives into code/debugging Please submit talk proposals for review by sending an email to workshop-pc at ovirt.org. Please include your full name, speaker biography and your talk abstract. We will accept submissions through Friday, 29 March 2013 at 23:59 PST. Speakers will be notified of acceptance by Monday, 8 April 2013. Accepted speakers should plan to submit their slides to the workshop-pc at ovirt.org mailing list no later than close of business on Monday, 22 April 2013. Registration can be found here: http://ovirtshanghai2013.eventbrite.com/ Hotel and lodging information can be found here: http://www.ovirt.org/Intel_Workshop_May_2013 Keep your eyes open for further announcements! Thank you all for your participation! -- Theron Conrey Open Source and Standards, Red Hat @theronconrey (initial thread was here: http://lists.ovirt.org/pipermail/users/2013-March/012862.html)

1 0

[Users] Upgrade 3.1 to 3.2
by Neil 12 Mar '13

12 Mar '13

Hi guys, Does anyone have any successful upgrades from 3.1 to 3.2 using Centos 6.3 and the Dreyou repos? I'm using ovirt 3.1 on our own production systems and would like to know the recommended upgrade methods/paths. I don't see much in the way of upgrade paths for any distributions for that matter. I've done quite a lot of googling and can't find much, also checked on the ovirt website for any possible guides or methods without much success. Thanks in advance. Regards. Neil Wilson.

4 7

[Users] ovirt 3.1 all-in-one setup fail
by Alex Leonhardt 12 Mar '13

12 Mar '13

Hi, since 3.2 all-in-one setup failed on centos 6.3, i tried 3.1 instead today, unfortunately, again failing at the point when adding the host to the cluster with this time this error : 2013-03-12 11:06:59::ERROR::all_in_one_100::206::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 204, in initAPI password=controller.CONF['AUTH_PASS']) File "/usr/lib/python2.6/site-packages/ovirtsdk/api.py", line 88, in __init__ debug=debug File "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/connectionspool.py", line 49, in __init__ debug=debug)) File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 38, in __init__ timeout=timeout) File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 106, in __createConnection raise NoCertificatesError NoCertificatesError: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. 2013-03-12 11:06:59::DEBUG::setup_sequences::62::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 207, in initAPI raise Exception(ERROR_CREATE_API_OBJECT) Exception: Error: could not create ovirtsdk API object Alex -- | RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |

2 3

Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop."
by Yuval M 12 Mar '13

12 Mar '13

> Thank you very much for your response. > I did what you suggested and I still get the same exception when trying to enter the administrative portal (I attached the screenshot). > In addition, I see that the ui-plugins directory is empty after restarting the engine-service, so it might not have been used. > > [wil@bufferoverflow ~]$ mkdir -p /home/wil/ovirt-engine/installation/share/ui-plugins > [wil@bufferoverflow ~]$ ls -la /home/wil/ovirt-engine/installation/share/ > total 28 > drwxr-xr-x. 7 wil wil 4096 Mar 11 15:01 . > drwxr-xr-x. 6 wil wil 4096 Mar 8 22:19 .. > drwxr-xr-x. 3 wil wil 4096 Mar 8 22:19 java > drwxr-xr-x. 3 wil wil 4096 Mar 8 22:19 man > drwxr-xr-x. 2 wil wil 4096 Mar 8 22:19 maven-poms > drwxr-xr-x. 11 wil wil 4096 Mar 8 22:19 ovirt-engine > drwxrwxr-x. 2 wil wil 4096 Mar 11 15:01 ui-plugins > [wil@bufferoverflow ~]$ ls /home/wil/ovirt-engine/installation/share/ui-plugins/ > total 8 > drwxrwxr-x. 2 wil wil 4096 Mar 11 15:01 . > drwxr-xr-x. 7 wil wil 4096 Mar 11 15:01 .. > [wil@bufferoverflow ~]$ > > > > > > > > On Mon, Mar 11, 2013 at 9:42 AM, Juan Hernandez <jhernand(a)redhat.com> wrote: >> >> On 03/08/2013 09:48 PM, Yuval M wrote: >>> >>> Thank you very much. I now get the welcome page when I enter >>> "http://localhost:8700/". >>> However, when I try to enter the Administrator Portal >>> <http://localhost:8700/webadmin> I get a javax.servlet.ServletException. >>> I attached a screenshot. >>> >>> Inline image 1 >>> >>> How can I troubleshoot this? >> >> >> I think this is because of the missing UI plugins directory. Try to create it: >> >> mkdir -p $HOME/ovirt-engine/installation/share/ui-plugins >> >> Then restart the engine. >> >>> >>> I appreciate your help very much >>> >>> Yuval >>> >>> >>> On Fri, Mar 8, 2013 at 8:05 PM, Juan Hernandez <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com>> wrote: >>> >>> On 03/08/2013 07:00 PM, Yuval M wrote: >>> >>> I attached the logs, here is the output from the commands you >>> suggested: >>> >>> >>> Looks like the database schema doesn't match the rest of the code. >>> You probably created the database before switching to branch 3.2. >>> Just drop the database and create it again with the scripts in the >>> 3.2 branch. >>> >>> * >>> * >>> *[root@bufferoverflow bin]# psql -U postgres engine* >>> >>> psql (9.2.3) >>> Type "help" for help. >>> engine=# select count(*) from vdc_options; >>> count >>> ------- >>> 345 >>> (1 row) >>> >>> *[root@bufferoverflow bin]# find >>> /home/wil/ovirt-engine/__installation >>> >>> -name postgresql.jar* >>> *[root@bufferoverflow bin]# find >>> /home/wil/ovirt-engine/__installation >>> -name postg\** >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar.index >>> >>> *[root@bufferoverflow bin]# ls -la >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/* >>> >>> >>> total 12 >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 . >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 postgresql >>> *[root@bufferoverflow bin]# ls -la >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/* >>> >>> >>> total 544 >>> drwxr-xr-x. 2 wil wil 4096 Mar 8 18:46 . >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. >>> -rw-r--r--. 1 wil wil 307 Mar 8 18:03 module.xml >>> -rw-rw-r--. 1 wil wil 539705 Mar 7 16:41 postgresql-jdbc.jar >>> -rw-rw-r--. 1 wil wil 545 Mar 8 18:46 postgresql-jdbc.jar.index >>> >>> >>> I appreciate your help >>> >>> Yuval >>> >>> On Fri, Mar 8, 2013 at 7:44 PM, Juan Hernandez >>> <jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: >>> >>> On 03/08/2013 06:38 PM, Yuval M wrote: >>> >>> Thanks, now "./engine-service start" succeeded. >>> /[root@bufferoverflow bin]# ./engine-service start/ >>> /Starting engine-service: >>> [ >>> OK ]/ >>> >>> >>> However, when I try to access "http://localhost:8700" I >>> get an empty >>> page (0 bytes). >>> >>> I see the following errors in >>> >>> /home/wil/ovirt-engine/____installation/var/log/ovirt-____engine/server.log >>> >>> >>> >>> JBAS014777: Services which failed to start: service >>> >>> jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: >>> org.jboss.msc.service.____StartException in service >>> >>> jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: >>> >>> >>> Failed to start service >>> >>> 2013-03-08 19:27:51,495 ERROR >>> [org.jboss.as.server.____deployment.scanner] >>> >>> >>> (DeploymentScanner-threads - 1) {"JBAS014653: Composite >>> operation failed >>> and was rolled back. Steps that failed:" => {"Operation >>> step-2" => >>> {"JBAS014671: Failed services" => >>> >>> {"jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.__jar\__".component.____UsersDomainsCacheManagerServic____e.START" >>> => "org.jboss.msc.service.____StartException in service >>> >>> jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.jar\____".component.____UsersDomainsCacheManagerServic____e.START: >>> >>> >>> Failed to start service"}}}} >>> >>> Here is the contents of my configuration file: >>> >>> [root@bufferoverflow installation]# cat >>> etc/sysconfig/ovirt-engine >>> # >>> # For descriptions of the parameters and their default >>> values look >>> # at the >>> /usr/share/ovirt-engine/conf/____engine.conf.defaults file. >>> >>> >>> # >>> # Please note that the engine installation tool >>> engine-setup will >>> # append the modified parameters to the end of this file. >>> # >>> JAVA_HOME=/usr/lib/jvm/jre-1.____7.0-openjdk.x86_64 >>> JBOSS_HOME=/home/wil/ovirt-____engine/jboss-as-7.1.1.Final >>> >>> >>> ENGINE_USER=wil >>> ENGINE_GROUP=wil >>> ENGINE_PROXY_ENABLED=false >>> ENGINE_HTTP_ENABLED=true >>> ENGINE_HTTP_PORT=8700 >>> ENGINE_HTTPS_ENABLED=false >>> ENGINE_AJP_ENABLED=false >>> ENGINE_DB_USER=postgres >>> ENGINE_DB_PASSWORD= >>> ENGINE_DEBUG_ADDRESS=0.0.0.0:____8787 < http://0.0.0.0:8787> >>> >>> >>> <http://0.0.0.0:8787> >>> >>> >>> Thank you very much for your help >>> >>> >>> Can you share the server.log and engine.log files? If >>> possible stop >>> the engine, clean the files, start again and then collect and >>> provide the files. >>> >>> Not sure, but I guess that you are having some problem with the >>> database, so please check the following: >>> >>> 1. Try to connect to the database manually: >>> >>> psql -U postgres engine >>> engine# select count(*) from vdc_options; >>> >>> 2. Make sure that the JDBC driver is in the right place and >>> that it >>> points to the right file if it is a symbolic link: >>> >>> find home/wil/ovirt-engine/____installation -name >>> >>> postgresql.jar >>> >>> >>> >>> Yuval >>> >>> On Fri, Mar 8, 2013 at 6:16 PM, Juan Hernandez >>> <jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>> wrote: >>> >>> On 03/08/2013 05:14 PM, Yuval M wrote: >>> >>> checked out to 3.2 branch, now the >>> configuration file >>> was as >>> detailed in >>> the wiki. >>> after configuring it I try to start the engine >>> and get: >>> >>> [wil@bufferoverflow bin]$ pwd >>> /home/wil/ovirt-engine/______installation/bin >>> >>> >>> >>> [wil@bufferoverflow bin]$ ./engine-service start >>> Traceback (most recent call last): >>> File "./engine-service", line 23, in <module> >>> import configobj >>> ImportError: No module named configobj >>> [wil@bufferoverflow bin]$ >>> >>> >>> Ok, this is because the service script needs the >>> python-configobj >>> and python-cheetah packages: >>> >>> yum install python-configobj python-cheetah >>> >>> >>> >>> >>> On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__> wrote: >>> >>> On 03/08/2013 03:51 PM, Juan Hernandez wrote: >>> >>> On 03/08/2013 03:49 PM, Yuval M wrote: >>> >>> OK, >>> brand new machine, >>> Fedora 18 (x64), >>> Trying to install Ovirt 3.2 from >>> sources >>> according to: >>> http://www.ovirt.org/Building___________Engine_Draft >>> <http://www.ovirt.org/Building_________Engine_Draft> >>> <http://www.ovirt.org/__Building_______Engine_Draft >>> <http://www.ovirt.org/Building_______Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_____Engine_Draft >>> <http://www.ovirt.org/__Building_____Engine_Draft> >>> <http://www.ovirt.org/__Building_____Engine_Draft >>> <http://www.ovirt.org/Building_____Engine_Draft>>> >>> >>> <http://www.ovirt.org/______Building___Engine_Draft >>> <http://www.ovirt.org/____Building___Engine_Draft> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft> >>> <http://www.ovirt.org/__Building___Engine_Draft >>> <http://www.ovirt.org/Building___Engine_Draft>>>> >>> >>> <http://www.ovirt.org/________Building_Engine_Draft >>> <http://www.ovirt.org/______Building_Engine_Draft> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>>> >>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft> >>> <http://www.ovirt.org/__Building_Engine_Draft >>> <http://www.ovirt.org/Building_Engine_Draft>>>>> >>> >>> Everything is good up to the >>> following stage: >>> "Now you need to do some >>> adjustments to the >>> configuration file >>> >>> >>> >>> $HOME/ovirt-engine/________installation/etc/sysconfig/________ovirt-engine" >>> >>> >>> >>> >>> >>> The "sysconfig" directory does >>> not exist. >>> so does the >>> "ovirt-engine" >>> configuration file (searched >>> through the >>> $HOME/ovirt-engine >>> tree). >>> I didn't find any code in the >>> Makefile >>> >>> ($HOME/ovirt-engine/________repository/Makefile) that >>> >>> >>> >>> would create >>> >>> them, >>> What am I missing? >>> >>> >>> This has changed recently and I >>> didn't update >>> that wiki >>> page. The >>> /etc/sysconig/ovirt-engine file has been >>> replaced by >>> /etc/ovirt-engine/engine.conf. >>> >>> >>> But wait, this change was made in the master >>> branch, not in >>> 3.2, so >>> it shouldn't be a problem. Are you sure >>> you are >>> using the >>> engine_3.2 >>> branch? >>> >>> >>> Thanks, >>> >>> Yuval >>> >>> On Tue, Feb 26, 2013 at 3:25 PM, Juan >>> Hernandez >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__>__> >>> >>> >>> >>> wrote: >>> >>> On 02/26/2013 02:19 PM, Doron >>> Fediuck wrote: >>> >>> >>> >>> ----- Original Message >>> ----- >>> >>> From: "Yuval M" >>> <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>>> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>> >>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com >>>>>> >>> >>> >>> To: "Juan Hernandez" >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>> >>> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__>__>__, users(a)ovirt.org >>> >>> <mailto:users@ovirt.org> >>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> >>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>>>> >>> >>> >>> Cc: "Limor Gavish" >>> <lgavish(a)gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com>>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>> >>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com>>> >>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com >>>>>> >>> >>> >>> Sent: Sunday, >>> February 24, 2013 >>> 11:38:12 PM >>> Subject: Re: >>> [Users] Trouble >>> building >>> Ovirt >>> from source - >>> "No rule to make target >>> `install_tools'. Stop." >>> >>> >>> >>> >>> Still having >>> trouble with >>> the build >>> process >>> (Ovirt 3.1): >>> $ sudo make >>> ... (success) ... >>> $ sudo make install ... >>> >>> inflating: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/______META-__INF/maven/__org.__ovirt.____engine.ui/______webadmin/pom.xml >>> inflating: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/____404.____html >>> checkdir error: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar >>> >>> >>> >>> >>> exists but >>> is not directory >>> unable to process >>> >>> >>> >>> >>> engine-bll.jar/org/ovirt/__________engine/core/bll/VdsDeploy$__32.________class. >>> checkdir error: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar >>> >>> >>> >>> >>> exists but >>> is not directory >>> unable to process >>> >>> >>> >>> >>> engine-bll.jar/org/ovirt/__________engine/core/bll/__________InitBackendServicesOnStartupBe__________an.class. >>> >>> >>> >>> >>> ... >>> make: *** >>> [install_artifacts] Error 2 >>> >>> >>> >>> >>> any insights? >>> >>> >>> Thanks... >>> >>> >>> >>> On Thu, Jan 24, >>> 2013 at 8:52 >>> PM, Juan >>> Hernandez < >>> jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__> >>> >>> >>> >>> wrote: >>> >>> >>> >>> >>> >>> On 01/24/2013 04:20 PM, >>> Yuval M wrote: >>> >>> >>> Hi, >>> I'm installing >>> Ovirt 3.1 on >>> Fedora >>> using this >>> guide: >>> http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- >>> >>> config_.26_engine-manage- >>> domains >>> >>> and I'm getting the >>> error in the >>> subject from >>> make. >>> there is indeed no >>> rule for >>> install_tools in >>> the makefile. >>> >>> What am I missing? >>> >>> Those instructions >>> are out >>> of date, >>> use "make >>> install". That >>> installs >>> the files, but you will >>> still need some >>> changes to make the >>> engine >>> work: >>> >>> 1. Create the ovirt >>> user >>> (the engine >>> runs by >>> default with this >>> service, unless you >>> change the >>> /etc/syscofig/ovirt-engine >>> file and >>> add the ENGINE_USER and >>> ENGINE_GROUP >>> parameters): >>> >>> useradd ovirt >>> >>> 2. Create (mkdir -p >>> ...) and >>> change the >>> ownership of the >>> directories >>> that the engine >>> needs to own to >>> ovirt:ovirt (chown >>> ovirt:ovirt ...): >>> >>> /etc/ovirt-engine >>> /var/log/ovirt-engine >>> /var/lock/ovirt-engine >>> >>> /var/lib/ovirt-engine/content >>> /var/lib/ovirt-engine/ >>> deployments >>> /var/tmp/ovirt-engine >>> /var/cache/ovirt-engine >>> >>> 3. Enable the HTTP >>> connector >>> in the >>> engine >>> (the default is >>> to enable >>> only AJP, and that >>> doesn't work >>> without Apache >>> as frontend) >>> adding >>> the following to the >>> /etc/sysconfig/ovirt-engine file: >>> >>> >>> ENGINE_PROXY_ENABLED=false >>> >>> ENGINE_HTTP_ENABLED=true >>> ENGINE_HTTP_PORT=8700 >>> >>> ENGINE_HTTPS_ENABLED=false >>> >>> ENGINE_AJP_ENABLED=false >>> >>> 4. Configure >>> database connection >>> details (the >>> default in >>> development >>> environments is to >>> use the >>> postgres >>> user and >>> the trust mode) >>> adding >>> this to >>> /etc/sysconfig/ovirt-engine: >>> >>> ENGINE_DB_USER=postgres >>> ENGINE_DB_PASSWORD= >>> >>> 5. Make sure that >>> you have the >>> PostgreSQL JDBC >>> driver >>> installed (rpm >>> -q postgresql-jdbc) and >>> install it if >>> needed >>> (yum install >>> postgresql-jdbc). >>> >>> 6. Now you can >>> start the engine >>> running the >>> engine-service >>> script: >>> >>> engine-service start >>> >>> Look at the system >>> log (the file >>> /var/log/messages) and the >>> engine >>> logs (the files >>> /var/log/ovirt-engine/server. >>> log and >>> >>> /var/log/ovirt-engine) for >>> errors. >>> >>> 7. Connect to >>> http://localhost:8700 >>> and you >>> should be able >>> to login >>> with user admin and >>> letmein! >>> as password. >>> >>> Note that I am >>> assuming that >>> you already >>> created the >>> database, and >>> that you want to >>> use this >>> installation for >>> development. If >>> you are >>> looking for an >>> production >>> installation I >>> suggest using the RPMs. >>> >>> Also I tested this >>> with the >>> latest >>> source from the >>> repository, it >>> will not work with >>> older >>> versions. >>> >>> -- >>> Dirección >>> Comercial: C/Jose >>> Bardasano >>> Baos, 9, >>> Edif. Gorbea >>> 3, planta >>> 3ºD, 28016 Madrid, >>> Spain >>> Inscrita en el Reg. >>> Mercantil de Madrid – >>> C.I.F. B82657941 - >>> Red Hat >>> S.L. >>> >>> >>> >>> Any progress here? >>> >>> >>> Yuval, that will not work >>> with 3.1. >>> Please >>> use 3.2 and >>> the following >>> instructions: >>> >>> http://www.ovirt.org/Building___________Engine_Draft >>> <http://www.ovirt.org/Building_________Engine_Draft> >>> <http://www.ovirt.org/__Building_______Engine_Draft >>> <http://www.ovirt.org/Building_______Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_____Engine_Draft >>> <http://www.ovirt.org/__Building_____Engine_Draft> >>> <http://www.ovirt.org/__Building_____Engine_Draft >>> <http://www.ovirt.org/Building_____Engine_Draft>>> >>> >>> <http://www.ovirt.org/______Building___Engine_Draft >>> <http://www.ovirt.org/____Building___Engine_Draft> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft> >>> <http://www.ovirt.org/__Building___Engine_Draft >>> <http://www.ovirt.org/Building___Engine_Draft>>>> >>> >>> >>> <http://www.ovirt.org/________Building_Engine_Draft >>> <http://www.ovirt.org/______Building_Engine_Draft> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>>> >>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft> >>> <http://www.ovirt.org/__Building_Engine_Draft >>> <http://www.ovirt.org/Building_Engine_Draft>>>>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose >>> Bardasano Baos, >>> 9, Edif. >>> Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. >>> Mercantil de >>> Madrid – C.I.F. >>> B82657941 - Red Hat >>> S.L. >>> >>> >>> >>> >>> >>> _______________________________________________________ >>> >>> >>> Users mailing list >>> Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>>>> >>> http://lists.ovirt.org/________mailman/listinfo/users >>> <http://lists.ovirt.org/______mailman/listinfo/users> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users>> >>> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users>>> >>> >>> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users>> >>> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users> >>> <http://lists.ovirt.org/__mailman/listinfo/users >>> <http://lists.ovirt.org/mailman/listinfo/users>>>> >>> >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano >>> Baos, 9, >>> Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – >>> C.I.F. >>> B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, >>> Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. >>> B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat >>> S.L. >>> >>> >> >> >> -- >> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain >> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. > >

2 5

Re: [Users] Users Digest, Vol 18, Issue 79
by xianghuadu 12 Mar '13

12 Mar '13

This is a multi-part message in MIME format. ------=_001_NextPart141836543370_=---- Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SEkNCiAgICAgIEkgd2FudCB0byBhc2sgeW91IGEgcXVlc3Rpb25zIGFib3V0IHRoZSBvdmlydCBz dG9yZSwgd2hlbiBJIGRpZG4ndCB1c2Ugb3ZpcnQsIEkgaGFkIGJ1aWx0IHVwIGJhc2VkIG9uIEtW TSB2aXJ0dWFsaXphdGlvbiBwbGF0Zm9ybS4gSXMgcHJvdmlkZWQgdGhyb3VnaCB0aGUgaXNjc2kg c3RvcmFnZSBzcGFjZS4NCk5vdyBJIHdhbnQgdG8gaW4gdGhlIGRlcGxveW1lbnQgb2YgdmlydHVh bGl6YXRpb24gcGxhdGZvcm1zIG92aXJ0IHBsYXRmb3JtIG1hbmFnZW1lbnQuIEJlZm9yZSBidXQg SSBmb3VuZCB0aGF0IGhhdmUgbm90IGJlZW4gYWJsZSB0byBhZGQgcGFydGl0aW9uIHRvIEtWTSBs dW4sIA0KYWx3YXlzIHByb21wdCBzYWlkOiAiVGhlIGZvbGxvd2luZyBMVU5zIGFyZSBhbHJlYWR5 IGluIHVzZQ0KV2hlbiBJIGNob29zZSB0byBBcHByb3ZlIGFmdGVyIG9wZXJhdGlvbiBhbHdheXMg Y29tcGxhaW5zOiBFcnJvciB3aGlsZSBleGVjdXRpbmcgdGhlIGFjdGlvbiBOZXcgU0FOIFN0b3Jh Z2UgRG9tYWluOiBFcnJvciBjcmVhdGluZyBhIFN0b3JhZ2UgRG9tYWluDQpXaGV0aGVyIG92aXJ0 IGJlZm9yZSBjYW4ndCB1c2UgdGhlIGRpdmlzaW9uIG9mIGx1bnMgdG8gdGhlIEtWTSwgb3IgbmVl ZCB0byBvdGhlciBTZXR0aW5ncy4NCkhvcGUgdG8gZ2V0IHlvdSBoZWxwLCB0aGFuayB5b3UgdmVy eSBtdWNoIQ== ------=_001_NextPart141836543370_=---- Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3DGB2312" http-equiv=3DContent-Type> <STYLE> BLOCKQUOTE { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px; MARGIN-LEFT: 2em } OL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } UL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } BODY { LINE-HEIGHT: 1.5; FONT-FAMILY: =CE=A2=C8=ED=D1=C5=BA=DA; COLOR: #000080; = FONT-SIZE: 10.5pt } </STYLE> <META name=3DGENERATOR content=3D"MSHTML 8.00.7601.17744"></HEAD> <BODY style=3D"MARGIN: 10px"> <DIV> <DIV>HI</DIV> <DIV>     =20 I want to ask you a questions about&nbs= p;the ovirt store, when I didn't use ov= irt, I had built up based on KVM v= irtualization platform. Is provided through the&n= bsp;iscsi storage space.</DIV> <DIV>Now I want to in the deployment of=  virtualization platforms ovirt platform manageme= nt. Before but I found that have not&nb= sp;been able to add partition to KVM lu= n, </DIV> <DIV>always prompt said: "<SPAN=20 style=3D"COLOR: #ff0000">The following LUNs are alread= y in use</SPAN></DIV> <DIV>When I choose to Approve after operatio= n always complains: <SPAN=20 style=3D"COLOR: #ff0000">Error while executing the act= ion New SAN Storage Domain: Error creating&n= bsp;a Storage Domain</SPAN></DIV> <DIV>Whether ovirt before can't use the divi= sion of luns to the KVM, or need t= o other Settings.</DIV> <DIV>Hope to get you help, thank you ve= ry much!</DIV></DIV></BODY></HTML> ------=_001_NextPart141836543370_=------

3 3

[Users] OpenLDAP Simple Authentication in Ovirt Engine
by Thierry Kauffmann 12 Mar '13

12 Mar '13

>> Hi, >> >> I am currently testing Ovirt 3.1 standalone on Fedora 17. >> >> Until now, I could only use the default user admin@internal. >> >> Our Directory at the University is OpenLDAP. We use it for authentication >> WITHOUT Kerberos : Simple authentication. >> >> I wonder how to use this backend to authenticate users and manage groups >> in Ovirt. >> >> Has anyone already set this up ? >> How to configure Ovirt to use Simple Authentication (No Kerberos). >> >> Cheers, >> >> -- >> Thierry Kauffmann >> Chef du Service Informatique // Facult? des Sciences // Universit? de >> Montpellier 2 >> >> [image: SIF - Service Informatique de la Facult? des Sciences]<http://sif.info-ufr.univ-montp2.fr/> [image: >> UM2 - Universit? de Montpellier 2] <http://www.univ-montp2.fr/> Service >> informatique de la Facult? des Sciences (SIF) >> Universit? de Montpellier 2 >> CC437 // Place Eug?ne Bataillon // 34095 Montpellier Cedex 5 >> >> T?l : 04 67 14 31 58 >> email : thierry.kauffmann(a)univ-montp2.fr >> web : http://sif.info-ufr.univ-montp2.fr/ >> http://www.fdsweb.univ-montp2.fr/ >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > Hi, > > This is a response from an older thread from Yair Zaslavsky: > > " there is no code allowing to add simple-authentication domains to > Manage-Domains. > In the past we did have the ability to do that, but there are several > problematic issues." > > Best regards, Hi, correct-me if I am wrong but this wiki page (http://www.ovirt.org/DomainInfrastructure) states clearly : > 1. Authenticating Active Directory, IPA and RHDS using either simple > or gssapi authentication > 2. Querying the directory using the LDAP protocol > 3. Auto deducing the LDAP provider type > 4. Easily adding new LDAP provider types > 5. Easily adding new query types > So what ? -- signature-TK Thierry Kauffmann Chef du Service Informatique // Faculté des Sciences // Université de Montpellier 2 SIF - Service Informatique de la Faculté des Sciences <http://sif.info-ufr.univ-montp2.fr/> UM2 - Université de Montpellier 2 <http://www.univ-montp2.fr/> Service informatique de la Faculté des Sciences (SIF) Université de Montpellier 2 CC437 // Place Eugène Bataillon // 34095 Montpellier Cedex 5 Tél : 04 67 14 31 58 email : thierry.kauffmann(a)univ-montp2.fr <mailto:thierry.kauffmann@univ-montp2.fr> web : http://sif.info-ufr.univ-montp2.fr/ http://www.fdsweb.univ-montp2.fr/

7 11

[Users] How to import existing libvirt management KVM virtual machine to the ovirt
by xianghuadu 12 Mar '13

12 Mar '13

This is a multi-part message in MIME format. ------=_001_NextPart536463721454_=---- Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 aGkgYWxsDQogICBIb3cgdG8gaW1wb3J0IGV4aXN0aW5nIGxpYnZpcnQgbWFuYWdlbWVudCBLVk0g dmlydHVhbCBtYWNoaW5lIHRvIHRoZSBvdmlydCANCg0KDQoNCg0KeGlhbmdodWFkdQ== ------=_001_NextPart536463721454_=---- Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Dgb2312" http-equiv=3DContent-Type> <STYLE> BLOCKQUOTE { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px; MARGIN-LEFT: 2em } OL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } UL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } BODY { LINE-HEIGHT: 1.5; FONT-FAMILY: =CE=A2=C8=ED=D1=C5=BA=DA; COLOR: #000000; = FONT-SIZE: 10.5pt } </STYLE> <META name=3DGENERATOR content=3D"MSHTML 8.00.7601.17744"></HEAD> <BODY style=3D"MARGIN: 10px"> <DIV>hi all</DIV> <DIV>  =20 How to import existing libvirt management KV= M virtual machine to the ovirt=20 </DIV> <DIV> </DIV> <HR style=3D"WIDTH: 210px; HEIGHT: 1px" align=3Dleft color=3D#b5c4df SIZE= =3D1> <DIV><SPAN>xianghuadu</SPAN></DIV></BODY></HTML> ------=_001_NextPart536463721454_=------

2 1

[Users] iSCSI multipath with EqualLogic SAN
by Baptiste AGASSE 11 Mar '13

11 Mar '13

Hi all, I'm testing ovirt 3.1 on centos boxes. I setup ovirt management node and 4 vdsm hosts. vdsm hosts have 2 nics on the SAN subnet. When i create a iscsi storage domain, it use only one of the two nics on the SAN network (showed with iscsiadm -m session on vdsm nodes). Does ovirt support multiples nics on the same subnet for iscsi SAN connection ? Have a nice day. Regards. Baptiste.

6 8

[Users] Exporting backing up Snapshots
by Neil 11 Mar '13

11 Mar '13

Hi guys, I'm working on automating snapshots(not live, just paused) from my oVirt setup at the moment, but I can't seem to find out how to export the snapshots for backing up purposes so they can be moved to another storage domain etc. Please could someone point me in the right direction Thank you! Regards. Neil Wilson.

2 2

[Users] 6.4 CR: oVirt 3.1 breaks with missing cpu features after update to CentOS 6.4 (6.3 + CR)
by Patrick Hurrelmann 11 Mar '13

11 Mar '13

Hi list, I tested the upcoming CentOS 6.4 release with my lab installation of oVirt 3.1 and it fails to play well. Background: freshly installed CentOS 6.3 host in a Nehalem CPU-type Cluster with 2 other hosts. Storage is iSCSI. Datacenter and Cluster are both version 3.1. oVirt 3.1 was installed via Dreyou's repo. In CentOS 6.3 all is fine and the following rpms are installed: libvirt.x86_64 0.9.10-21.el6_3.8 libvirt-client.x86_64 0.9.10-21.el6_3.8 libvirt-lock-sanlock.x86_64 0.9.10-21.el6_3.8 libvirt-python.x86_64 0.9.10-21.el6_3.8 vdsm.x86_64 4.10.0-0.46.15.el6 vdsm-cli.noarch 4.10.0-0.46.15.el6 vdsm-python.x86_64 4.10.0-0.46.15.el6 vdsm-xmlrpc.noarch 4.10.0-0.46.15.el6 qemu-kvm.x86_64 2:0.12.1.2-2.295.el6_3.10 uname -a Linux vh-test1.mydomain.com 2.6.32-279.22.1.el6.x86_64 #1 SMP Wed Feb 6 03:10:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux virsh cpu capabilities on 6.3: <cpu> <arch>x86_64</arch> <model>Nehalem</model> <vendor>Intel</vendor> <topology sockets='1' cores='4' threads='1'/> <feature name='rdtscp'/> <feature name='pdcm'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='smx'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='monitor'/> <feature name='dtes64'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='vme'/> </cpu> and corresponding cpu features from vdsClient: cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca, cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht, tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon, pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni, dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr, pdcm,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi, flexpriority,ept,vpid,model_Conroe,model_Penryn, model_Nehalem cpuModel = Intel(R) Xeon(R) CPU X3430 @ 2.40GHz cpuSockets = 1 cpuSpeed = 2394.132 So the system was updated to 6.4 using the continuous release repo. Installed rpms after update to 6.4 (6.3 + CR): libvirt.x86_64 0.10.2-18.el6 libvirt-client.x86_64 0.10.2-18.el6 libvirt-lock-sanlock.x86_64 0.10.2-18.el6 libvirt-python.x86_64 0.10.2-18.el6 vdsm.x86_64 4.10.0-0.46.15.el6 vdsm-cli.noarch 4.10.0-0.46.15.el6 vdsm-python.x86_64 4.10.0-0.46.15.el6 vdsm-xmlrpc.noarch 4.10.0-0.46.15.el6 qemu-kvm.x86_64 2:0.12.1.2-2.355.el6_4_4.1 uname -a Linux vh-test1.mydomain.com 2.6.32-358.0.1.el6.x86_64 #1 SMP Wed Feb 27 06:06:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux virsh capabilities on 6.4: <cpu> <arch>x86_64</arch> <model>Nehalem</model> <vendor>Intel</vendor> <topology sockets='1' cores='4' threads='1'/> <feature name='rdtscp'/> <feature name='pdcm'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='smx'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='monitor'/> <feature name='dtes64'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='vme'/> </cpu> and corresponding cpu features from vdsClient: cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca, cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht, tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon, pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni, dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr, pdcm,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi, flexpriority,ept,vpid,model_coreduo,model_Conroe cpuModel = Intel(R) Xeon(R) CPU X3430 @ 2.40GHz cpuSockets = 1 cpuSpeed = 2394.098 Full outputs of virsh capabilities and vdsCaps are attached. The only difference I can see is that 6.4 exposes one additional cpu flags (sep) and this seems to break the cpu recognition of vdsm. Anyone has some hints on how to resolve or debug this further? What more information can I provide to help? Best regards Patrick -- Lobster LOGsuite GmbH, Münchner Straße 15a, D-82319 Starnberg HRB 178831, Amtsgericht München Geschäftsführer: Dr. Martin Fischer, Rolf Henrich

5 14

[Users] Host installation problems. Brigde
by Christer Olsen 11 Mar '13

11 Mar '13

I'm having issues with installing host in oVirt. Manager reports: Failed to install Host localhost. Step: SetNetworking; Details: addNetwork error trying to add management bridge. *** LOG *** Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 517 getAddress Entry. url= http://10.1.1.30:22020/Components/vds/ Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 539 getAddress return. address=10.1.1.30 port=22020 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 957 makeBridge begin. Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 424 _getMGTIface: read host name: 10.1.1.30 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 431 _getMGTIface: using host name 10.1.1.30 strIP= 10.1.1.30 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 437 _getMGTIface IP=10.1.1.30 strIface=eth0 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 997 makeBridge found the following bridge paramaters: ['NAME=', 'BOOTPROTO=dhcp', $ Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 135 ['/usr/share/vdsm/addNetwork', 'ovirtmgmt', '', '', 'eth0', 'NAME=', 'BOOTPROT$ Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 143 Specified netmask or gateway but not ip Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 144 WARNING:root:options IPADDR is deprecated. Use ipaddr instead WARNING:root:options NETMASK is deprecated. Use netmask instead WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead WARNING:root:options ONBOOT is deprecated. Use onboot instead Traceback (most recent call last): File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> main() File "/usr/share/vdsm/configNetwork.py", line 1427, in main addNetwork(bridge, **kwargs) File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork bridged=bridged, **options) File "/usr/share/vdsm/configNetwork.py", line 823, in _addNetworkValidation "Specified netmask or gateway but not ip") ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1037 makeBridge Failed to add ovirtmgmt bridge out=Specified netmask or gateway bu$ err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead WARNING:root:options NETMASK is deprecated. Use netmask instead WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead WARNING:root:options ONBOOT is deprecated. Use onboot instead Traceback (most recent call last): File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> main() File "/usr/share/vdsm/configNetwork.py", line 1427, in main addNetwork(bridge, **kwargs) File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork bridged=bridged, **options) File "/usr/share/vdsm/configNetwork.py", line 823, in _addNetworkValidation "Specified netmask or gateway but not ip") ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') ret=22 Sun, 10 Mar 2013 19:19:30 ERROR deployUtil 1052 makeBridge errored: out=Specified netmask or gateway but not ip err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead WARNING:root:options NETMASK is deprecated. Use netmask instead WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead WARNING:root:options ONBOOT is deprecated. Use onboot instead Traceback (most recent call last): File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> main() File "/usr/share/vdsm/configNetwork.py", line 1427, in main addNetwork(bridge, **kwargs) File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork bridged=bridged, **options) File "/usr/share/vdsm/configNetwork.py", line 823, in _addNetworkValidation "Specified netmask or gateway but not ip") ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') ret=22 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1055 makeBridge return. Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 729 addNetwork error trying to add management bridge Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 278 <BSTRAP component='SetNetworking' status='FAIL' message='addNetwork error t$ Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 1023 setNetworking test failed Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1140 <BSTRAP component='RHEV_INSTALL' status='FAIL'/> Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1142 **** End VDS Validation **** *** END LOG *** I have tried googling myself to an answer, and i have tried finding it out myself but with no luck. (the host is the same one as the engine is running on) Please, any help would be appreciated. Kind regards

4 3

[Users] debug environment how to?
by bigclouds 11 Mar '13

11 Mar '13

------=_Part_197756_687901158.1362752476157 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit 1.how to make a debug environment?include engine and vdsm. 2.if GWT can be disabled,it is a obstacle to debug. thanks ------=_Part_197756_687901158.1362752476157 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"><div>1.how to make a debug environment?include engine and vdsm.</div><div>2.if GWT can be disabled,it is a obstacle to debug.</div><div> </div><div>thanks</div><div> </div><div> </div></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_197756_687901158.1362752476157--

2 1

[Users] NoRouteToHostException when adding F18 host to engine built with latest source.
by snmishra＠linux.vnet.ibm.com 11 Mar '13

11 Mar '13

Hi, I am trying to setup 2 F18 machines as ovirt engine and host. On the first machine I 1. built engine from source, 2. copied vdsm bootstrap files as documented at http://www.ovirt.org/Building_oVirt_engine#Copying_vdsm_bootstrap_files and 3. completed the steps at http://www.ovirt.org/Building_oVirt_engine#Deploying_engine-config_.26_engi… and deployed the engine. Other F18 machine is just a minimal install of F18, iptables running as mentioned at http://www.ovirt.org/Quick_Start_Guide#Install_Fedora_Host I start webadmin and go to add a new host (second F18), but it immediately goes to non-responsive state. 2013-03-08 15:37:26,833 INFO [org.ovirt.engine.core.bll.AddVdsCommand] (http--0.0.0.0-8700-6) [6c833e18] Running command: AddVdsCommand internal: false. Entities affected : ID: 99408929-82cf-4dc7-a532-9d998063fa95 Type: VdsGroups 2013-03-08 15:37:26,868 INFO [org.ovirt.engine.core.bll.AddVdsSpmIdCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] Running command: AddVdsSpmIdCommand internal: true. Entities affected : ID: ca519cc1-7579-4292-9d49-c68aba649991 Type: VDS 2013-03-08 15:37:26,881 INFO [org.ovirt.engine.core.bll.AddVdsSpmIdCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] Lock freed to object EngineLock [exclusiveLocks= key: 5849b030-626e-47cb-ad90-3ce782d831b3 value: REGISTER_VDS , sharedLocks= ] 2013-03-08 15:37:26,883 ERROR [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Cannot get vdsManager for vdsid=ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,885 INFO [org.ovirt.engine.core.vdsbroker.RemoveVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] START, RemoveVdsVDSCommand(HostName = ovirt2, HostId = ca519cc1-7579-4292-9d49-c68aba649991), log id: 684f7786 2013-03-08 15:37:26,887 ERROR [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Cannot get vdsManager for vdsid=ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,888 INFO [org.ovirt.engine.core.vdsbroker.RemoveVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] FINISH, RemoveVdsVDSCommand, log id: 684f7786 2013-03-08 15:37:26,889 ERROR [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Cannot get vdsManager for vdsid=ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,891 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] START, AddVdsVDSCommand(HostName = ovirt2, HostId = ca519cc1-7579-4292-9d49-c68aba649991), log id: 35d874d9 2013-03-08 15:37:26,892 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] AddVds - entered , starting logic to add VDS ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,893 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] AddVds - VDS ca519cc1-7579-4292-9d49-c68aba649991 was added, will try to add it to the resource manager 2013-03-08 15:37:26,894 INFO [org.ovirt.engine.core.vdsbroker.VdsManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Entered VdsManager constructor 2013-03-08 15:37:26,896 INFO [org.ovirt.engine.core.vdsbroker.VdsManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Initialize vdsBroker (9.27.28.20,54,321) 2013-03-08 15:37:26,897 INFO [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] VDS ca519cc1-7579-4292-9d49-c68aba649991 was added to the Resource Manager 2013-03-08 15:37:26,898 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] FINISH, AddVdsVDSCommand, log id: 35d874d9 2013-03-08 15:37:29,946 WARN [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-9) Failed to refresh VDS , vds = ca519cc1-7579-4292-9d49-c68aba649991 : ovirt2, VDS Network Error, continuing. java.net.NoRouteToHostException: No route to host 2013-03-08 15:37:32,953 WARN [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-10) Failed to refresh VDS , vds = ca519cc1-7579-4292-9d49-c68aba649991 : ovirt2, VDS Network Error, continuing. java.net.NoRouteToHostException: No route to host 2013-03-08 15:37:35,987 ERROR [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-2) Server failed to respond, vds_id = ca519cc1-7579-4292-9d49-c68aba649991, vds_name = ovirt2, error = java.net.NoRouteToHostException: No route to host I can ssh from engine to host machine using the authentication provided in new host dialog. -Sharad

2 1

[Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop."
by Yuval M 11 Mar '13

11 Mar '13

Hi, I'm installing Ovirt 3.1 on Fedora using this guide: http://www.ovirt.org/Building_oVirt_engine#Deploying_engine-config_.26_engi… and I'm getting the error in the subject from make. there is indeed no rule for install_tools in the makefile. What am I missing? Thanks, Yuval

3 15

[Users] Cluster, hosts, everything down and totally stuck
by Matt . 10 Mar '13

10 Mar '13

My cluster is totally down and I'm completely stuck. I cannot set a host in maintenance, stop a VM because it has a unknown state, so also the host where this one is on. A new added node cannot find the storage because all are down but the NFS is up. On the node that is "unknown" all interfaces are up, on the new added host all are down following ovirt, but are actually up. Because of this I'm stuck between 2 or 4 walls and I'm not able to fix this in some way. What are my options ? I'm thinking of setting the VM that is stuck on my existing host to off by editing the DB of ovirt. I hope we can sort this out. Cheers, Matt

4 4

[Users] Query about Testsuite based on Ovirt Python Api
by Yoga Ananth 10 Mar '13

10 Mar '13

Hello Everyone Is there any testsuites based on Ovirt Python Api ( http://www.ovirt.org/Testing/PythonApi) something similar to Openstack tempest. Objective is to do functional and integration tests on fully deployed ovirt environment, like the one in http://www.ovirt.org/Testing/OvirtTestDay3.1, What would be the best way to go about doing this, any suggestions or links to refer will be very helpful. Kind Regards Ananth

2 1

[Users] Adding external events to oVirt
by satheesh hegde 10 Mar '13

10 Mar '13

--347019335-505193291-1362674185=:59623 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi,=0A=0AI tried exploring the feature of adding external events in oVirt. = (Version 3.2)=0AI just wrote a=A0JavaScript=A0to fetch events and it wroked= fine.(GEToperation to URLhttp://<IP>/api/events).=0A=0ABut when tried with= POST operation, to add my own events, it threw "error 405 Method not allowe= d". (URLhttp://<IP>/api/events).=0A(The html file is not included in any pl= ugin code, its standalone file).=0A(The data I passed is as specified in li= nk: =A0" http://www.ovirt.org/Features/Design/DetailedExternalEvents").=0A= =0AWhat went wrong? =A0Is it not supported on oVirt3.2 or the URL is incorr= ect?=0A=0ARegards=0ASatheesh J --347019335-505193291-1362674185=:59623 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"color:#000; background-color:#fff; font-family:ti= mes new roman, new york, times, serif;font-size:12pt"><div style=3D"font-fa= mily: 'times new roman', 'new york', times, serif; font-size: 12pt;">Hi,</d= iv><div style=3D"font-family: 'times new roman', 'new york', times, serif; = font-size: 12pt;"><br></div><div style=3D"font-family: 'times new roman', '= new york', times, serif; font-size: 16px; color: rgb(0, 0, 0); background-c= olor: transparent; font-style: normal;">I tried exploring the feature of ad= ding external events in oVirt. (<span style=3D"font-weight: bold;">Version = 3.2</span>)</div><div style=3D"background-color: transparent;"><span style= =3D"font-family: 'times new roman', 'new york', times, serif;">I just wrote= a JavaScript to fetch events and it wroked fine.(</span><span st= yle=3D"color: rgb(0, 0, 0); font-family: 'times new roman', 'new york', tim= es, serif; font-size: 16px; font-style: normal; font-weight: bold;">GET</sp= an><span style=3D"font-family: 'times new roman', 'new york', times, serif;"> opera= tion to URL</span><span style=3D"color: rgb(0, 0, 0); font-family: 'times n= ew roman', 'new york', times, serif; font-size: 16px; font-style: normal; f= ont-weight: bold;"> http://<IP>/api/events</span><span style=3D"font-= family: 'times new roman', 'new york', times, serif;">).</span></div><div s= tyle=3D"font-family: 'times new roman', 'new york', times, serif; font-size= : 16px; color: rgb(0, 0, 0); background-color: transparent; font-style: nor= mal;"><br></div><div style=3D"font-family: 'times new roman', 'new york', t= imes, serif; font-size: 16px; color: rgb(0, 0, 0); background-color: transp= arent;"><span style=3D"font-style: normal;">But when tried with<span style= =3D"font-weight: bold;"> POST</span> operation, to add my own events, it th= rew "</span><span style=3D"font-style: italic; text-decoration: underline;"= >error 405 Method not allowed</span>". (URL<span style=3D"font-style: norma= l; font-weight: bold;"> http://<IP>/api/events</span>).</div><div style= =3D"font-family: 'times new roman', 'new york', times, serif; font-size: 16= px; color: rgb(0, 0, 0); background-color: transparent; font-style: normal;= ">(The html file is not included in any plugin code, its standalone file).<= /div><div style=3D"font-family: 'times new roman', 'new york', times, serif= ; font-size: 16px; color: rgb(0, 0, 0); background-color: transparent; font= -style: normal;">(The data I passed is as specified in link:  " http:/= /www.ovirt.org/Features/Design/DetailedExternalEvents").</div><div style=3D= "font-family: 'times new roman', 'new york', times, serif; font-size: 16px;= color: rgb(0, 0, 0); background-color: transparent; font-style: normal;"><= br></div><div style=3D"font-family: 'times new roman', 'new york', times, s= erif; font-size: 16px; color: rgb(0, 0, 0); background-color: transparent; = font-style: normal;">What went wrong?  Is it not supported on oVirt3.2 or the URL is incorrect?</div><div style=3D"font-family: 'times new roman'= , 'new york', times, serif; font-size: 16px; color: rgb(0, 0, 0); backgroun= d-color: transparent; font-style: normal;"><br></div><div style=3D"font-fam= ily: 'times new roman', 'new york', times, serif; font-size: 16px; color: r= gb(0, 0, 0); background-color: transparent; font-style: normal;">Regards</d= iv><div style=3D"font-family: 'times new roman', 'new york', times, serif; = font-size: 16px; color: rgb(0, 0, 0); background-color: transparent; font-s= tyle: normal;">Satheesh J</div></div></body></html> --347019335-505193291-1362674185=:59623--

3 2

[Users] install a f18 host with ovirtmgmt vlan tagged
by Gianluca Cecchi 10 Mar '13

10 Mar '13

Hello, engine f18 3.2 stable. I try to install a host in a new DC where I only configured ovirtmgmt network as vlan tagged with vlan id 65 Install fails with this error in /var/log/ovirt-engine/host-deploy/ovirt-20130307154915-10.4.4.57.log ... 2013-03-07 15:49:15 ERROR otopi.context context._executeMethod:139 Failed to execute stage 'Setup validation': Interface em3.65 is VLAN interface However its configuration is unexpected .. On fedora18 host I have NetworkManger disabled and network enabled. At the moment the only adapter that starts on the system is em3 and its vlan counterpart em3.65, with these conf files: # cat ifcfg-em3 DEVICE=em3 HWADDR=00:1C:C4:AB:89:0F TYPE=Ethernet BOOTPROTO=none IPV6INIT=no UUID=0675d8c1-858e-4819-9c65-4ff5f63587b7 ONBOOT=yes NM_CONTROLLED=no # cat ifcfg-em3.65 DEVICE=em3.65 ONBOOT=yes BOOTPROTO=none VLAN=yes IPADDR=10.4.4.57 NETMASK=255.255.255.0 GATEWAY=10.4.4.250 NM_CONTROLLED=no How should I configure the host at the beginning to have ovirtmgmt configured as VLAN tagged and host deploy with no complain? Thanks in advance, Gianluca

4 8

[Users] how macro-variables is replaced
by bigclouds 10 Mar '13

10 Mar '13

------=_Part_193839_1176079034.1362892252082 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit in vdsm code, there are many macro-variables like @xxxxx@. i want to know how it is replaced by real value. like config.py.in. ('trust_store_path', '@TRUSTSTORE@', 'Where the certificates and keys are situated.'), thanks ------=_Part_193839_1176079034.1362892252082 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial">in vdsm code, there are many macro-variables like @xxxxx@.<div>i want to know how it is replaced by real value.</div><div>like config.py.in.</div><div><div> ('trust_store_path', '<span style="color: rgb(255, 0, 0);">@TRUSTSTORE@</span>',</div><div>            'Where the certificates and keys are situated.'),</div></div><div><br></div><div>thanks</div></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_193839_1176079034.1362892252082--

2 1

[Users] RHEV-toolsSetup
by Kevin Daly 09 Mar '13

09 Mar '13

According to the ovirt guide, there is a RHEV-toolsSetup iso to use to install Windows Clients.. Where do I get this iso? -- ============================ Kevin Daly (416) 953-8330

3 2

[Users] Packet loss to guests
by Neil 08 Mar '13

08 Mar '13

Hi guys, I've got a bit of a strange one, I'm setting up an internal ovirt system Centos 6.3 64bit dreyou repo... and I'm getting lots of packet loss on the guest I've installed, the packet loss doesn't happen on the physical hosts, only the VM gets it, when communicating from and to it. 1 node(Centos 6.3 64bit) vdsm-4.10.0-0.46.15.el6.x86_64 vdsm-cli-4.10.0-0.46.15.el6.noarch vdsm-xmlrpc-4.10.0-0.46.15.el6.noarch vdsm-python-4.10.0-0.46.15.el6.x86_64 The engine(also Centos 6.3 64bit(engine has local NFS storage which the node connects to) ovirt-engine-userportal-3.1.0-3.19.el6.noarch ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch ovirt-engine-3.1.0-3.19.el6.noarch ovirt-engine-backend-3.1.0-3.19.el6.noarch ovirt-engine-notification-service-3.1.0-3.19.el6.noarch ovirt-image-uploader-3.1.0-16.el6.noarch ovirt-engine-genericapi-3.1.0-3.19.el6.noarch ovirt-iso-uploader-3.1.0-16.el6.noarch ovirt-engine-restapi-3.1.0-3.19.el6.noarch ovirt-engine-tools-common-3.1.0-3.19.el6.noarch ovirt-engine-sdk-3.2.0.8-1.el6.noarch ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch ovirt-engine-cli-3.2.0.5-1.el6.noarch ovirt-log-collector-3.1.0-16.el6.noarch ovirt-engine-setup-3.1.0-3.19.el6.noarch ovirt-engine-jbossas711-1-0.x86_64 ovirt-engine-config-3.1.0-3.19.el6.noarch Both the node and engine have bonded interfaces all NICS are intel 82574L gigabit and the managed switch reflects gigabit on each of the ports. The ifcfg-bond0 is below... DEVICE=bond0 IPADDR=192.168.0.9 NETWORK=192.168.0.0 NETMASK=255.255.255.0 USERCTL=no BONDING_OPTS=mode=2 BOOTPROTO=none MTU=1500 ONBOOT=yes Then the ifcfg-eth0 and eth1 are almost identical... DEVICE=eth2 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes MTU=1500 BOOTPROTO=none These are the network details on the guest, as you can see, there are no network errors showing on the guest at all, which is strange.... eth0 Link encap:Ethernet HWaddr 00:1A:4A:A8:00:00 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21a:4aff:fea8:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:255 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:490762 (479.2 KiB) TX bytes:32516 (31.7 KiB) Ethernet controller: Red Hat, Inc Virtio network device Has anyone got any ideas? Have I set something up wrong? Any help or advice is greatly appreciated. Regards. Neil Wilson.

2 3