- Users - oVirt List Archives

[Users] Outage Update - www.ovirt.org and gerrit.ovirt.org
by Ofer Schreiber 25 Mar '12

25 Mar '12

www.ovirt.org and gerrit.ovirt.org are now up and running. We experienced two issues: 1. DB corruption on www.ovirt.org, caused by a full file system. 2. Faulty gerrit service, probably caused by #1. Both issues were handled by oVirt infra team (mburns, quaid and myself) Thank you for your patience. Ofer Schreiber oVirt infra team

2 1

Re: [Users] [node-devel] iptables configuration is bad with bonded network, fails to start Fedora 16
by Mike Burns 25 Mar '12

25 Mar '12

This is not ovirt-node from the description, forwarding on to users(a)ovirt.org. Mike On Sat, 2012-03-24 at 17:28 -0400, Andrew Wells wrote: > when I start with fedora 16 with vdsm installed, the iptables > configuration is generated but iptables does not start. I am using the > stable ovirt-engine.repo > > > [root@node1 ~]# service iptables status > Redirecting to /bin/systemctl status iptables.service > iptables.service - IPv4 firewall with iptables > Loaded: loaded > (/lib/systemd/system/iptables.service; enabled) > Active: failed since Sat, 24 Mar 2012 > 15:36:49 -0400; 1h 40min ago > Main PID: 895 (code=exited, status=1/FAILURE) > CGroup: > name=systemd:/system/iptables.service > > > > > > > [root@node1 ~]# cat /etc/sysconfig/iptables > # oVirt default firewall configuration. Automatically > generated by vdsm bootstrap script. > *filter > :INPUT ACCEPT [0:0] > :FORWARD ACCEPT [0:0] > :OUTPUT ACCEPT [0:0] > -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT > -A INPUT -p icmp -j ACCEPT > -A INPUT -i lo -j ACCEPT > # vdsm > -A INPUT -p tcp --dport 54321 -j ACCEPT > # libvirt tls > -A INPUT -p tcp --dport 16514 -j ACCEPT > # SSH > -A INPUT -p tcp --dport 22 -j ACCEPT > # guest consoles > -A INPUT -p tcp -m multiport --dports 5634:6166 -j ACCEPT > # migration > -A INPUT -p tcp -m multiport --dports 49152:49216 -j ACCEPT > # snmp > -A INPUT -p udp --dport 161 -j ACCEPT > # Reject any other input traffic > -A INPUT -j REJECT --reject-with icmp-host-prohibited > -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT > --reject-with icmp-host-prohibited > COMMIT > _______________________________________________ > node-devel mailing list > node-devel(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/node-devel

2 1

[Users] Passing a hint/message to a VM when it boots
by Kyrre Begnum 25 Mar '12

25 Mar '12

Hello, when creating a new VM from a template, i'd like to pass a hint of some sort ( perhaps a hostname ) to it so that the internal config managment system can do the rest of the setup. This should also be programmable via the REST API, as I want to use it for automated deployments. Has anyone had success doing this with Ovirt? i can only see two approaches: - Put the hint in a floppy / iso and mount it on the VM. - Hardcode a MAC address and let a DHCP server provide the hostname Both of these do not seem very optimal to me. I'd appreciate some thoughts from the community on how to proceed. Thanks in advance, k

2 3

[Users] Can i get more detail performance ?
by 肖力 25 Mar '12

25 Mar '12

------=_Part_303349_1291169119.1331881300797 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: base64 SSBjYW4gb25seSBzZWUgY3B1IGRpc2sgbmV0d29yayB1c2UgcmF0aW+jrEkgd2FudCBnZXQgbW9y ZSBkZXRhaWwgIHBlcmZvcm1hbmNlIGNvdW50ZXIsbGlrZSBiYW5kd2lkdGggZGVsYXllZKOsV2hl cmUgY2FuIGkgZmluZCA/IHRrcyEKCgp4aWFvbGkg ------=_Part_303349_1291169119.1331881300797 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: base64 PGRpdiBzdHlsZT0ibGluZS1oZWlnaHQ6MS43O2NvbG9yOiMwMDAwMDA7Zm9udC1zaXplOjE0cHg7 Zm9udC1mYW1pbHk6YXJpYWwiPkkgY2FuIG9ubHkgc2VlIGNwdSBkaXNrIG5ldHdvcmsmbmJzcDt1 c2UgcmF0aW+jrEkgd2FudCBnZXQgbW9yZSBkZXRhaWwgJm5ic3A7cGVyZm9ybWFuY2UmbmJzcDtj b3VudGVyLGxpa2UmbmJzcDtiYW5kd2lkdGgmbmJzcDtkZWxheWVko6xXaGVyZSBjYW4gaSBmaW5k ID8gdGtzITxkaXY+PGJyPjwvZGl2PjxkaXY+eGlhb2xpJm5ic3A7PC9kaXY+PC9kaXY+PGJyPjxi cj48c3BhbiB0aXRsZT0ibmV0ZWFzZWZvb3RlciI+PHNwYW4gaWQ9Im5ldGVhc2VfbWFpbF9mb290 ZXIiPjwvc3Bhbj48L3NwYW4+ ------=_Part_303349_1291169119.1331881300797--

2 1

[Users] CLI: can't attach storagedomain
by David Li 25 Mar '12

25 Mar '12

Hi, I have an iso domain created during engine setup. But I can't attach it to the datacenter in cli. oVirt shell (connected)]# create storagedomain --name "fc16-lid-engine_iso-domain" --datacenter-identifier "ac2690e4-72b2-11e1-882d-000c29bf47ca" unknown error: status: 400 reason: Bad Request detail: [Cannot attach Storage Domain.] Any ideas?

3 10

[Users] [Fwd: [node-devel] iptables configuration is bad with bonded network, fails to start Fedora 16]
by Mike Burns 25 Mar '12

25 Mar '12

1 1

Re: [Users] browser shows blank page for admin portal
by aru mon 23 Mar '12

23 Mar '12

Attached the server.log file. On Mon, Mar 19, 2012 at 8:36 PM, aru mon <arumon82(a)gmail.com> wrote: > I have a conclusion of why it is not working for me is because my jboss > applications are not deploying properly. > I just failed to fetch the error logs for now, but will post soon. > on the log i could see a info to create the ROOT.war.dodeploy and > engine.ear.dodeploy files. I created it manually and ROOT.war was able to > deploy successfully but engine.ear failed. Then i tried to connect through > the browser and it was connecting properly, but the /webadmin and non of > the other urls where working. So i think this is an issue with the failing > jboss apps only. Please suggest whether i need to do any kind of > configuration changes on the jboss config file? > > Regards, > Arumon > > On Mon, Mar 19, 2012 at 1:43 PM, aru mon <arumon82(a)gmail.com> wrote: > >> Yes. It is an rpm based setup. >> used the command engine-setup to configure the ovirt engine. >> >> Regards, >> Arumon >> >> On Mon, Mar 19, 2012 at 12:57 PM, Itamar Heim <iheim(a)redhat.com> wrote: >> >>> On 03/19/2012 09:07 AM, aru mon wrote: >>> >>>> I tried to access the url http://fqdn:8080 <http://fqdn:8080/> this >>>> gave >>>> me blank page. >>>> Then i tried https://fqdn:8443 <https://fqdn:8443/> , This gave me the >>>> >>>> ssl alert, after accepting the ssl alert it gave the blank page. >>>> I haven't tried the (/api). >>>> My server is only having 2GB ram. Does this make any difference? >>>> >>> >>> is this an rpm based deployment with ./ovirt-setup? >>> >>> Regards, >>>> Arumon >>>> >>>> On Mon, Mar 19, 2012 at 12:25 PM, Itamar Heim <iheim(a)redhat.com >>>> <mailto:iheim@redhat.com>> wrote: >>>> >>>> On 03/19/2012 08:30 AM, aru mon wrote: >>>> >>>> I am using the port #8080 and 8443 >>>> I think I have to update the browser. Please let me know if you >>>> have any >>>> more suggession. >>>> >>>> >>>> do you see the welcome page (/), or the api (/api)? >>>> >>>> Regards, >>>> Arumon >>>> On Mon, Mar 19, 2012 at 11:57 AM, Itamar Heim <iheim(a)redhat.com >>>> <mailto:iheim@redhat.com> >>>> <mailto:iheim@redhat.com <mailto:iheim@redhat.com>>> wrote: >>>> >>>> On 03/19/2012 08:13 AM, aru mon wrote: >>>> >>>> Hi Team, >>>> I was able to install ovirt-engine and spice-apxi on >>>> fc16. >>>> When i am trying to connect to the admin portal using the >>>> firefox 3.5 >>>> which is available on the fc by default, It is able to >>>> connect >>>> to portal >>>> but shows only blank page. >>>> Any idea on this issue? Please help. >>>> Regards, >>>> >>>> >>>> which port are you browsing? >>>> yum update on fedora should bring you to at least firefox 10? >>>> >>>> Arumon >>>> >>>> >>>> ______________________________**_____________________ >>>> Users mailing list >>>> Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>>> <mailto:Users@ovirt.org>> >>>> http://lists.ovirt.org/____**mailman/listinfo/users<http://lists.ovirt.org/____mailman/listinfo/users> >>>> <http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >>>> > >>>> <http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >>>> <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ______________________________**___________________ >>>> Users mailing list >>>> Users(a)ovirt.org <mailto:Users@ovirt.org> >>>> http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >>>> <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >>>> > >>>> >>>> >>>> >>>> >>>> >>>> ______________________________**_________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >>>> >>> >>> >> >

2 6

[Users] Problems removing a VM
by Andre Kostur 23 Mar '12

23 Mar '12

I'm having some problems trying to remove a VM. If I attempt to remove it, all the UI tells me is that it failed. No indications as to why it failed. However, if I dig into the logs on the server, it seems to be complaining that it cannot find the volume ("Failed to DeleteImageGroupVDS, error = Volume does not exist:"). If I attempt to just remove the disk from the VM, I get the same sort of response. The storage domain claims that it is active. What's next? (I only have 1 storage domain, 1 host, 1 cluster (OK, technically 2 if you count "default"), 1 datacenter) -- *Andre Kostur*

1 0

[Users] host registration fails
by aru mon 23 Mar '12

23 Mar '12

Hi Team, After instaling ovinrt-engine and the ovirt-node on seperate servers, when i am trying to add the node into engine the registration is failing. I donot have a DNS for name resolution. I can add the hostnames into the engine servers /etc/hosts file, but not sure how to do it on the node server. Please help. Regards, Arumon

2 1

[Users] Regarding ovirt node iso
by aru mon 23 Mar '12

23 Mar '12

Hi Team, I am trying to understand the difference of the different installation package available for ovirt node. 1. ovirt-node-image-2.2.3-1.1.fc16.iso 2. ovirt-node-image-latest.iso 3. ovirt-node-2.2.2.tar Please help me to understand the difference of the above three files. Regards, Arumon

2 2

[Users] Windows agent
by Michal Kopacki 23 Mar '12

23 Mar '12

Hi, Could someone point me to place where I will find ovirt agent files for windows ? -- Regards, Michal

3 3

[Users] Question on configuring local storage on oVirt Node
by Hans Lellelid 23 Mar '12

23 Mar '12

Hi folks - I hope this is the right place for this question; I have tried to Google this but in general haven't been able to find much in the way of docs outside of the main installation guide. In aforementioned guide there are instructions for configuring local-only storage on oVirt Node machines: "On a oVirt Node host, set up the path for the local storage as /data/images. This is the only path permitted for a oVirt Node. On a Red Hat Enterprise Linux host other paths are supported but the directories to support it must be manually created first." I'm probably missing something, but it's unclear to me how to create this local storage mountpoint on that host. (I don't see anything in the Node TUI.) I tried simply specifying "/data/images" in the hopes that it was automatically created, but the Admin console just spun indefinitely (eventually refreshing the page revealed that the store was note created). I'm currently rebuilding that Node as a F16+VDSM box instead -- so I can get in there and set this up manually (is there a way to get into schell on oVirt Nodes and mess with the [F16-based?] OS?) Any guidance greatly appreciated. Thanks, Hans

2 3

[Users] Virtual Disk creation - really slow (config issue?) e.g 20GB disk created in 23 mins - NFS server/Gigabit switch - can anyone suggest why speed is so slow ? (at this rate it would take 1hr 40 mins to create a 100GB disk...)
by Morgan Cox 22 Mar '12

22 Mar '12

Hi. After my many issues with spice I have finally sorted them out. Now I am having an issue with the speed of virtual disk creation - when I go to create a virtual disk it takes a long time (far to long to be usable) My setup is as following 3 servers:- 1 Frontend (ovirt engine) - Fedora 16 - external + local IP (91.215.xxx.xx + 10.0.0.10) 1 Ovirt node (using the node .iso) - external + local IP (ovirtmgmt (eth0) - 91.215.xxx.xxx and LAN (eth1) - 10.0.0.101) 1 NFS storage - external + local IP - I attached the storage using the Local IP (10.0.0.190) All servers are connected via a Gigabit switch (so speed should be better) I can scp between servers far faster - I'm almost sure its due to the node ovirtmgmt address being an external (internet ip) and not LAN ip. - therefore the traffic is not just going over the gigabit switch but via the core router in the DC... Can anyone suggest how I can 'debug' where the slowness is coming from On my NFS server I have it setup like (in /etc/exports) /storage1 *(rw,sync,no_subtree_check) I had previous tried setting up the node on a LAN IP previously and it caused spice to not work - as the node had no internet access / DNS - I also tried making the frontend server a gateway (and using - iptables -t nat -A POSTROUTING -j MASQUERADE ) - this also cause spice to not work (as it always tried to connect to the 10.0.0.x address from my desktop - and fail..) Any hints/help will be welcomed Cheers

1 0

[Users] disable ballooning mode
by Michal Kopacki 22 Mar '12

22 Mar '12

I'm trying to get virtual windows and specific software on it working. Windows is working fine but i'm getting blue screen when trying to start this particular application (which works fine in vmware). I figureout that there could be some kind of problem with memory. My question is about ballonning memory: is it on as default ? If yes, then how to disable it ? Did anyone also discovered such problemes ? -- Michal

3 9

[Users] A new blog on oVirt-Foreman integration
by Amos Benari 22 Mar '12

22 Mar '12

http://cloudprovisioning.wordpress.com/ >From the blog: When designing a cloud provisioning stack the main goals are: * One process to create virtual machines regardless if its in your private or public cloud * Prevent vendor lock down. * Reuse existing resources and use existing knowledge in the organization The Foreman-Puppet-Fog-oVirt stack is design to do just that ...

1 0

Re: [Users] problem with storagedomain config in CLI
by Li, David 21 Mar '12

21 Mar '12

--_000_A0D5581BE022624487D06FF31DA39EAC46DC29969Acsmailcloudsh_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable yeah, I am a little confused by the CLI syntax. maybe that's the problem. s= o i tried to create a new data domain like the followings: [oVirt shell (connected)]# create storagedomain --name "fc16-lid-engine_data-domain" --host-id "bcb946e8-72b9-11e1-8c2b-000c29bf47= ca" --type "data" --storage-type "nfs" --storage-address "10.10.2.187" --storage-path "/home/lid2/workspace/ovirt/storagedomain/data-domain" unknown error: status: 400 reason: Bad Request detail: [Cannot connect server to Storage. ] No luck here either. ----- Original Message ---- From: Omer Frenkel <ofrenkel(a)redhat.com> To: David Li <david_li(a)sbcglobal.net> Cc: users(a)ovirt.org Sent: Wed, March 21, 2012 8:22:59 AM Subject: Re: [Users] CLI: can't attach storagedomain ----- Original Message ----- > From: "David Li" <david_li(a)sbcglobal.net> > To: "Omer Frenkel" <ofrenkel(a)redhat.com> > Cc: users(a)ovirt.org > Sent: Wednesday, March 21, 2012 5:10:26 PM > Subject: Re: [Users] CLI: can't attach storagedomain > > Omer, > > Here is my storagedomain and datacenter info. > > [oVirt shell (connected)]# list datacenters --show-all > > id : > ac2690e4-72b2-11e1-882d-000c29bf47ca > name : Default > description : The default Data Center > status-state : uninitialized the DC is in 'uninitialized' status, means no domains are attached to it. you first need to attach a Data storage domain, only then you can attach non-data domains (ISO, export) > storage_type : nfs > supported_versions-version-major: 3 > supported_versions-version-minor: 0 > version-major : 3 > version-minor : 0 > > > [oVirt shell (connected)]# list storagedomains > datacenter kwargs show-all > [oVirt shell (connected)]# list storagedomains --show-all > > id : 27dfd13e-aec4-4708-b0e3-a7f4143a118b > name : fc16-lid-engine_iso-domain > available : 0 > committed : 0 > master : False > status-state : unattached > storage-address: fc16-lid-engine.srv.cloudshield.com > storage-path : /home/lid2/workspace/ovirt/storagedomain/iso-domain > storage-type : nfs > storage_format : v1 > type : iso > used : 0 > > > > > > > ----- Original Message ---- > From: Omer Frenkel <ofrenkel(a)redhat.com> > To: David Li <david_li(a)sbcglobal.net> > Cc: users(a)ovirt.org > Sent: Wed, March 21, 2012 7:44:28 AM > Subject: Re: [Users] CLI: can't attach storagedomain > > > > ----- Original Message ----- > > From: "David Li" <david_li(a)sbcglobal.net> > > To: users(a)ovirt.org > > Sent: Wednesday, March 21, 2012 4:14:11 PM > > Subject: [Users] CLI: can't attach storagedomain > > > > Hi, > > I have an iso domain created during engine setup. But I can't > > attach > > it to the > > datacenter in cli. > > > > oVirt shell (connected)]# create storagedomain --name > > "fc16-lid-engine_iso-domain" --datacenter-identifier > > "ac2690e4-72b2-11e1-882d-000c29bf47ca" > > unknown error: > > status: 400 > > reason: Bad Request > > detail: [Cannot attach Storage Domain.] > > > > > > Any ideas? > > what is the status of the DC you are trying to attach this domain? > first domain attached to a DC should be data domain, to function as > master > storage domain. > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > --_000_A0D5581BE022624487D06FF31DA39EAC46DC29969Acsmailcloudsh_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 14 (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue vli= nk=3Dpurple><div class=3DWordSection1>yeah, I am a lit= tle confused by the CLI syntax. maybe that's the problem. so i<o:p></o:p></= p>tried to create a new data domain like the following= s:<o:p></o:p><o:p> </o:p>[oVirt shell (connected)]# create storagedomain --name<o:p></o:p><= p class=3DMsoNormal>"fc16-lid-engine_data-domain" --host-id &quot= ;bcb946e8-72b9-11e1-8c2b-000c29bf47ca"<o:p></o:p>--type "data" --storage-type "nfs" --storage-addres= s "10.10.2.187"<o:p></o:p>--storage-path= "/home/lid2/workspace/ovirt/storagedomain/data-domain"<o:p></o:p= >unknown error:<o:p></o:p>status: 400<o:p></o:p>reason: Bad Request<o:p></o= :p>detail: [Cannot connect server to Storage.&nbsp= ; ]<o:p></o:p><o:p> </o:p>No luck here either.<o:p></o:p><o:p> </= o:p><o:p> </o:p><o:p= > </o:p><o:p> </o:p><o:p> </o:p>----- Original Message ----<= o:p></o:p>From: Omer Frenkel <ofrenkel(a)redhat.c= om><o:p></o:p>To: David Li <david_li@sbcglob= al.net><o:p></o:p>Cc: users(a)ovirt.org<o:p></o:p= >Sent: Wed, March 21, 2012 8:22:59 AM<o:p></o:p></= p>Subject: Re: [Users] CLI: can't attach storagedomain= <o:p></o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p>----- Original Message -----<o:p></o:p>> From: "David Li" <david_li(a)sbcglobal.net><o:p></o:p>= > To: "Omer Frenkel" <ofrenkel@red= hat.com><o:p></o:p>> Cc: users(a)ovirt.org<o:p= ></o:p>> Sent: Wednesday, March 21, 2012 5:10:2= 6 PM<o:p></o:p>> Subject: Re: [Users] CLI: can'= t attach storagedomain<o:p></o:p>><o:p> </= o:p>> Omer,<o:p></o:p>= ><o:p> </o:p>> Here is my storagedomain= and datacenter info.<o:p></o:p>><o:p> </o= :p>> [oVirt shell (connected)]# list datacenter= s --show-all<o:p></o:p>><o:p> </o:p><p= class=3DMsoNormal>> id        &= nbsp;           &nbs= p;         :<o:p></o:p>> ac2690e4-72b2-11e1-882d-000c29bf47ca<o:p></o:p>> name        &nb= sp;            =        : Default<o:p></o:p>> description        &nbs= p;           : The defaul= t Data Center<o:p></o:p>> status-state &nb= sp;            =       : uninitialized<o:p></o:p><o:p> </o:p>the DC is in 'uninitialize= d' status, means no domains are attached to it.<o:p></o:p>you first need to attach a Data storage domain, only then you can a= ttach<o:p></o:p>non-data domains (ISO, export)<o:p= ></o:p><o:p> </o:p>&= gt; storage_type         &nbsp= ;          : nfs<o:p></o:p></p= >> supported_versions-version-major: 3<o:p></o:p></= p>> supported_versions-version-minor: 0<o:p></o:p><= /p>> version-major     &nb= sp;            : 3<o= :p></o:p>> version-minor   &nbsp= ;            &n= bsp; : 0<o:p></o:p>><o:p> </o:p>><o:p> </o:p>> [oVirt sh= ell (connected)]# list storagedomains<o:p></o:p>&g= t; datacenter  kwargs      show-all<o:p></o:p= >> [oVirt shell (connected)]# list storagedomai= ns --show-all<o:p></o:p>><o:p> </o:p><= p class=3DMsoNormal>> id        =     : 27dfd13e-aec4-4708-b0e3-a7f4143a118b<o:p></o:p>> name        =   : fc16-lid-engine_iso-domain<o:p></o:p>>= available      : 0<o:p></o:p>> committed      : 0<o:p></o:p>> master        : False= <o:p></o:p>> status-state  : unattached<o:= p></o:p>> storage-address: fc16-lid-engine.srv.= cloudshield.com<o:p></o:p>> storage-path  = : /home/lid2/workspace/ovirt/storagedomain/iso-domain<o:p></o:p>> storage-type  : nfs<o:p></o:p>> storage_format : v1<o:p></o:p>> type&n= bsp;         : iso<o:p></o:p><p= class=3DMsoNormal>> used       &nbsp= ;  : 0<o:p></o:p>><o:p> </o:p>><o:p> </o:p>><o:p>&n= bsp;</o:p>><o:p> </o:p>><o:p> </o:p>><o:p> </o:p></= p>> ----- Original Message ----<o:p></o:p>> From: Omer Frenkel <ofrenkel(a)redhat.com><o:p></o= :p>> To: David Li <david_li(a)sbcglobal.net&gt= ;<o:p></o:p>> Cc: users(a)ovirt.org<o:p></o:p></p= >> Sent: Wed, March 21, 2012 7:44:28 AM<o:p></o:p><= /p>> Subject: Re: [Users] CLI: can't attach storage= domain<o:p></o:p>><o:p> </o:p>><o:p> </o:p>><o:p> <= /o:p>> ----- Original Message -----<o:p></o:p><= /p>> > From: "David Li" <david_li@s= bcglobal.net><o:p></o:p>> > To: users@ovi= rt.org<o:p></o:p>> > Sent: Wednesday, March = 21, 2012 4:14:11 PM<o:p></o:p>> > Subject: [= Users] CLI: can't attach storagedomain<o:p></o:p>&= gt; ><o:p></o:p>> > Hi,<o:p></o:p>> > I have an iso domain created during engine setu= p. But I can't<o:p></o:p>> > attach<o:p></o:= p>> > it to the<o:p></o:p>> > datacenter in cli.<o:p></o:p>>= ><o:p></o:p>> > oVirt shell (connected)]= # create storagedomain --name<o:p></o:p>> > = "fc16-lid-engine_iso-domain" --datacenter-identifier<o:p></o:p></= p>> > "ac2690e4-72b2-11e1-882d-000c29bf47ca= "<o:p></o:p>> > unknown error:<o:p></o:= p>> > status: 400<o:p></o:p>> > reason: Bad Request<o:p></o:p>&= gt; > detail: [Cannot attach Storage Domain.]<o:p></o:p>> ><o:p></o:p>> ><o:p></o:p><= /p>> > Any ideas?<o:p></o:p>><o:p> </o:p>> what is the status = of the DC you are trying to attach this domain?<o:p></o:p>> first domain attached to a DC should be data domain, to functi= on as<o:p></o:p>> master<o:p></o:p>> storage domain.<o:p></o:p>><o= :p> </o:p>> > _________________________= ______________________<o:p></o:p>> > Users m= ailing list<o:p></o:p>> > Users(a)ovirt.org<o:= p></o:p>> > http://lists.ovirt.org/mailman/l= istinfo/users<o:p></o:p>> ><o:p></o:p><p= class=3DMsoNormal>><o:p> </o:p>><o:p>&= nbsp;</o:p></div></body></html>= --_000_A0D5581BE022624487D06FF31DA39EAC46DC29969Acsmailcloudsh_--

1 0

[Users] Really need serious help with spice (its just not working !!) - attached ~/.spicec/spicec.log
by Morgan Cox 21 Mar '12

21 Mar '12

Hi. My Setup - 3 servers 1 Frontend (ovirt engine) - Fedora 16 - external + local IP 1 Ovirt node (using the node .iso) - external + local IP 1 NFS storage - external + local IP - I attached the storage using the Local IP (10.0.0.190) I have launched firefox with - SPICEC_LOG_LEVEL=0 firefox I create a VM, turn it on - click the spice console button - it crashes I can see Warning: failed to connect: Connection refused (111) ~/.spicec/spicec.log ( I have removed the IP / domain name) ------------------------------------------------------------------------- 1332262683 INFO [5895:5895] Application::main: starting 0.10.0 1332262683 DEBUG [5895:5895] Application::Application: 1332262683 DEBUG [5895:5895] HotKeysParser::HotKeysParser: hotkeys = toggle-fullscreen=shift+f11,release-cursor=shift+f12 1332262683 DEBUG [5895:5895] HotKeysParser::add_key: keys = shift 1332262683 DEBUG [5895:5895] HotKeysParser::add_key: keys = f11 1332262683 DEBUG [5895:5895] HotKeysParser::add_key: keys = shift 1332262683 DEBUG [5895:5895] HotKeysParser::add_key: keys = f12 1332262683 DEBUG [5895:5895] Platform::init: 1332262683 INFO [5895:5895] init_key_map: using evdev mapping 1332262683 INFO [5895:5895] MultyMonScreen::MultyMonScreen: platform_win: 104857601 1332262683 INFO [5895:5895] ForeignMenu::ForeignMenu: Creating a foreign menu connection /tmp/SpiceForeignMenu-5895.uds 1332262683 DEBUG [5895:5895] LinuxListener::LinuxListener: listening socket - /tmp/SpiceForeignMenu-5895.uds, added to events_loop 1332262683 INFO [5895:5895] Controller::Controller: Creating a controller connection /tmp/spicec-y6x224/spice-xpi 1332262683 DEBUG [5895:5895] LinuxListener::LinuxListener: listening socket - /tmp/spicec-y6x224/spice-xpi, added to events_loop 1332262684 DEBUG [5895:5895] LinuxListener::on_event: New connection created, fd: 22 1332262686 DEBUG [5895:5895] Application::set_host_cert_subject: subject entry: O=frontend.ovirt.domain.co.uk 1332262686 DEBUG [5895:5895] Application::set_host_cert_subject: subject entry: CN=91.***.***.*** 1332262686 DEBUG [5895:5895] HotKeysParser::HotKeysParser: hotkeys = release-cursor=shift+f12,toggle-fullscreen=shift+f11 1332262686 DEBUG [5895:5895] HotKeysParser::add_key: keys = shift 1332262686 DEBUG [5895:5895] HotKeysParser::add_key: keys = f12 1332262686 DEBUG [5895:5895] HotKeysParser::add_key: keys = shift 1332262686 DEBUG [5895:5895] HotKeysParser::add_key: keys = f11 1332262686 DEBUG [5895:5896] RedPeer::connect_to_peer: Trying 91.***.***.***.*** 65535 1332262686 INFO [5895:5896] RedPeer::connect_to_peer: Connect failed: Connection refused (111) 1332262686 WARN [5895:5896] RedChannel::run: failed to connect: Connection refused (111) 1332262686 INFO [5895:5895] main: Spice client terminated (exitcode = 3) 1332262686 DEBUG [5895:5895] cleanup: ------------------------------------------------------------------------- The IP it seems to be trying is the external IP of the Ovirt node... ~/.spicec/spice-xpi.log shows ------------------------------------------------------------------------- 2012-03-20 16:58:03,134 ERROR nsPluginInstance::Connect: ERROR failed to run spice-xpi-client 2012-03-20 16:58:06,260 ERROR nsPluginInstance::CallOnDisconnected: OnDisconnected is not object ------------------------------------------------------------------------- Any ideas ? Also is there any way of adding a ovirt node via host name rather than IP - I can't seem to using the ovirt node / ovirt engine. Any help will be welcomed Regards

5 5

[Users] spice issues preventing me using Ovirt (not been able to test it yet) - Is it possible to use VNC ?
by Morgan Cox 21 Mar '12

21 Mar '12

Hi For the last few weeks I have been tried to test Ovirt - but am failing due to spice not working... I have created a bugzilla ticket about my spice issues https://bugzilla.redhat.com/show_bug.cgi?id=805552 At the minute spice just doesn't work for me - I have tried from multiple desktops - (1 FC16 1 opensuse 12.1) - both have the same spice versions (spice-xpi, etc). All I want to do really is see Ovirt working, can I use VNC or is that a WIP? If I select VNC in Ovirt how do I connect (the spice icon is greyed out) Or (preferred) can anyone help me with spice? Regards

3 2

[Users] oVirt host requirement
by Andre Kostur 21 Mar '12

21 Mar '12

Just checking to be sure that the Installation Guide doesn't have a typo, but do virtualization hosts really require 10 (ten) GB of RAM minimum, before even placing a VM onto it? (Page 8, Section 2.1.2.2) -- Andre Kostur

3 2

[Users] host is non responsive!!
by Fedoraけんけん 21 Mar '12

21 Mar '12

hi all. My name is Atsushi Nakashima my oVirt engine and host is one same host. configure host, state is non responsive. configuration process. 1. install fedora 16. 2. yum update 3. set up bridge ovirtmgmt ifcfg-p5p1 DEVICE=p5p1 ONBOOT=yes BRIDGE=ovirtmgmt ifcfg-ovirtmgmt DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=static IPADDR=192.168.1.11 NETMASK=255.255.255.0 GATEWAY=192.168.1.1 4. sudo wget http://www.ovirt.org/releases/stable/fedora/16/ovirt-engine.repo -P /etc/yum.repos.d/ 5. sudo yum install -y ovirt-engine 6. sudo engine-setup 7. url http://192.168.1.11/webadmin on web browser 8. expand all -> new -> hostname z9plus IP : 192.168.1.11 installed some package. after reboot, host status is non responsive what's idea?

3 3

[Users] oVirt RPM install for RHEL 6.2
by Andrei Vakhnin 21 Mar '12

21 Mar '12

Anyone was able to get a successful installation of ovirt-engine on RHELS 6.2? When I try to do rpm install of virt-engine on rhel6.2 I'm getting following errors: Error: Package: ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 (ovirt-engine-stable) Requires: libc.so.6(GLIBC_2.14)(64bit) Error: Package: ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 (ovirt-engine-stable) Requires: python(abi) = 2.7 Installed: python-2.6.6-29.el6.x86_64 (@rhel-x86_64-server-6) python(abi) = 2.6 Available: python-2.6.5-3.el6.i686 (rhel-x86_64-server-6) python(abi) = 2.6 Available: python-2.6.5-3.el6_0.2.i686 (rhel-x86_64-server-6) python(abi) = 2.6 Available: python-2.6.6-20.el6.x86_64 (rhel-x86_64-server-6) python(abi) = 2.6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Thanks Andrei

2 1

[Users] ovirt.org unavailable
by Laszlo Hornyak 20 Mar '12

20 Mar '12

Hi, The ovirt.org site is inavailable for a few hours. Does the infrastructure team know about the problem? Thank you, Laszlo

2 2

[Users] Maintenance storage
by ?????? 20 Mar '12

20 Mar '12

This is a multi-part message in MIME format. ------=_NextPart_000_003B_01CD05C0.B4079D30 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi. If you try to deactivate storage server (export type) ovirt reports the following: Error: Cannot deactivate Data Domain while there are running tasks in the Data Center. -Please wait until tasks will finish and try again. Is it possible to manually kill tasks that do not give deactivate storage? ------=_NextPart_000_003B_01CD05C0.B4079D30 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"> <meta name=3DGenerator content=3D"Microsoft Word 12 (filtered = medium)"><style></style></head><body lang=3DRU link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>Hi.<o:p></o:p>If you try to deactivate storage server (export type) ovirt = reports the following:<o:p></o:p><o:p> </o:p>Error: Cannot deactivate Data Domain while = there are running tasks in the Data Center. -Please wait until = tasks will finish and try again.<o:p></o:p><o:p> </o:p>Is it possible to manually kill = tasks that do not give deactivate storage?<o:p></o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p></div></body></html> ------=_NextPart_000_003B_01CD05C0.B4079D30--

3 6

Re: [Users] browser shows blank page for admin portal
by aru mon 19 Mar '12

19 Mar '12

I am using the port #8080 and 8443 I think I have to update the browser. Please let me know if you have any more suggession. Regards, Arumon On Mon, Mar 19, 2012 at 11:57 AM, Itamar Heim <iheim(a)redhat.com> wrote: > On 03/19/2012 08:13 AM, aru mon wrote: > >> Hi Team, >> I was able to install ovirt-engine and spice-apxi on fc16. >> When i am trying to connect to the admin portal using the firefox 3.5 >> which is available on the fc by default, It is able to connect to portal >> but shows only blank page. >> Any idea on this issue? Please help. >> Regards, >> > > which port are you browsing? > yum update on fedora should bring you to at least firefox 10? > > Arumon >> >> >> ______________________________**_________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >> > >

2 3

[Users] browser shows blank page for admin portal
by aru mon 19 Mar '12

19 Mar '12

Hi Team, I was able to install ovirt-engine and spice-apxi on fc16. When i am trying to connect to the admin portal using the firefox 3.5 which is available on the fc by default, It is able to connect to portal but shows only blank page. Any idea on this issue? Please help. Regards, Arumon

2 1