- Users - oVirt List Archives

Host not becoming active due to VDSM failure
by Vinícius Ferrão 03 Aug '21

03 Aug '21

Hello, I have a host that's failing to bring up VDSM, the logs don't say anything specific, but there's a Python error about DHCP on it. Is there anyone with a similar issue? [root@rhvpower ~]# systemctl status vdsmd ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: disabled) Active: inactive (dead) Jul 30 01:53:40 rhvpower.local.versatushpc.com.br systemd[1]: Dependency failed for Virtual Desktop Server Manager. Jul 30 01:53:40 rhvpower.local.versatushpc.com.br systemd[1]: vdsmd.service: Job vdsmd.service/start failed with result 'dependency'. Jul 30 12:34:12 rhvpower.local.versatushpc.com.br systemd[1]: Dependency failed for Virtual Desktop Server Manager. Jul 30 12:34:12 rhvpower.local.versatushpc.com.br systemd[1]: vdsmd.service: Job vdsmd.service/start failed with result 'dependency'. [root@rhvpower ~]# systemctl start vdsmd A dependency job for vdsmd.service failed. See 'journalctl -xe' for details. On the logs I got the following messages: ==> /var/log/vdsm/upgrade.log <== MainThread::DEBUG::2021-07-30 12:34:55,143::libvirtconnection::168::root::(get) trying to connect libvirt MainThread::INFO::2021-07-30 12:34:55,167::netconfpersistence::238::root::(_clearDisk) Clearing netconf: /var/lib/vdsm/staging/netconf MainThread::INFO::2021-07-30 12:34:55,178::netconfpersistence::188::root::(save) Saved new config RunningConfig({'ovirtmgmt': {'netmask': '255.255.255.0', 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'ipaddr': '10.20.0.106', 'defaultRoute': True, 'dhcpv6': False, 'gateway': '10.20.0.1', 'mtu': 1500, 'switch': 'legacy', 'stp': False, 'bootproto': 'none', 'nameservers': ['10.20.0.1']}, 'servers': {'vlan': 172, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-other': {'vlan': 2020, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes1': {'vlan': 2021, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes3': {'vlan': 2023, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes2': {'vlan': 2022, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'nfs': {'vlan': 200, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'storage': {'vlan': 192, 'netmask': '255.255.255.240', 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': False, 'ipaddr': '192.168.10.6', 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes4': {'vlan': 2024, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}}, {'bond0': {'nics': ['enP48p1s0f2', 'enP48p1s0f3'], 'options': 'mode=4', 'switch': 'legacy', 'hwaddr': '98:be:94:78:cc:72'}}, {}) to [/var/lib/vdsm/staging/netconf/nets,/var/lib/vdsm/staging/netconf/bonds,/var/lib/vdsm/staging/netconf/devices] MainThread::INFO::2021-07-30 12:34:55,179::netconfpersistence::238::root::(_clearDisk) Clearing netconf: /var/lib/vdsm/persistence/netconf MainThread::INFO::2021-07-30 12:34:55,188::netconfpersistence::188::root::(save) Saved new config PersistentConfig({'ovirtmgmt': {'netmask': '255.255.255.0', 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'ipaddr': '10.20.0.106', 'defaultRoute': True, 'dhcpv6': False, 'gateway': '10.20.0.1', 'mtu': 1500, 'switch': 'legacy', 'stp': False, 'bootproto': 'none', 'nameservers': ['10.20.0.1']}, 'servers': {'vlan': 172, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-other': {'vlan': 2020, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes1': {'vlan': 2021, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes3': {'vlan': 2023, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes2': {'vlan': 2022, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'nfs': {'vlan': 200, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}, 'storage': {'vlan': 192, 'netmask': '255.255.255.240', 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': False, 'ipaddr': '192.168.10.6', 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'bootproto': 'none', 'nameservers': []}, 'xcat-nodes4': {'vlan': 2024, 'bonding': 'bond0', 'ipv6autoconf': False, 'bridged': True, 'dhcpv6': False, 'mtu': 1500, 'switch': 'legacy', 'defaultRoute': False, 'stp': False, 'bootproto': 'none', 'nameservers': []}}, {'bond0': {'nics': ['enP48p1s0f2', 'enP48p1s0f3'], 'options': 'mode=4', 'switch': 'legacy', 'hwaddr': '98:be:94:78:cc:72'}}, {}) to [/var/lib/vdsm/persistence/netconf/nets,/var/lib/vdsm/persistence/netconf/bonds,/var/lib/vdsm/persistence/netconf/devices] MainThread::DEBUG::2021-07-30 12:34:55,188::cmdutils::130::root::(exec_cmd) /usr/share/openvswitch/scripts/ovs-ctl status (cwd None) ==> /var/log/vdsm/supervdsm.log <== restore-net::INFO::2021-07-30 12:34:55,924::restore_net_config::69::root::(_restore_sriov_config) Non persisted SRIOV devices found: {'0033:01:00.0', '0003:01:00.0'} restore-net::INFO::2021-07-30 12:34:55,924::restore_net_config::458::root::(restore) starting network restoration. restore-net::DEBUG::2021-07-30 12:34:55,942::restore_net_config::366::root::(_wait_for_for_all_devices_up) All devices are up. restore-net::DEBUG::2021-07-30 12:34:55,968::cmdutils::130::root::(exec_cmd) /sbin/tc qdisc show (cwd None) restore-net::DEBUG::2021-07-30 12:34:55,989::cmdutils::138::root::(exec_cmd) SUCCESS: <err> = b''; <rc> = 0 restore-net::DEBUG::2021-07-30 12:34:56,087::plugin::261::root::(_check_version_mismatch) NetworkManager version 1.30.0 restore-net::DEBUG::2021-07-30 12:34:56,088::context::144::root::(register_async) Async action: Retrieve applied config: ethernet enP48p1s0f2 started restore-net::DEBUG::2021-07-30 12:34:56,088::context::144::root::(register_async) Async action: Retrieve applied config: ethernet enP48p1s0f3 started restore-net::DEBUG::2021-07-30 12:34:56,088::context::144::root::(register_async) Async action: Retrieve applied config: bridge xcat-nodes3 started restore-net::DEBUG::2021-07-30 12:34:56,089::context::144::root::(register_async) Async action: Retrieve applied config: bridge xcat-other started restore-net::DEBUG::2021-07-30 12:34:56,089::context::144::root::(register_async) Async action: Retrieve applied config: bridge xcat-nodes4 started restore-net::DEBUG::2021-07-30 12:34:56,089::context::144::root::(register_async) Async action: Retrieve applied config: bridge ovirtmgmt started restore-net::DEBUG::2021-07-30 12:34:56,089::context::144::root::(register_async) Async action: Retrieve applied config: bond bond0 started restore-net::DEBUG::2021-07-30 12:34:56,089::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.192 started restore-net::DEBUG::2021-07-30 12:34:56,089::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.2020 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.2022 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.2024 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.172 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.2021 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.2023 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: vlan bond0.200 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: bridge xcat-nodes1 started restore-net::DEBUG::2021-07-30 12:34:56,090::context::144::root::(register_async) Async action: Retrieve applied config: bridge xcat-nodes2 started restore-net::DEBUG::2021-07-30 12:34:56,091::context::144::root::(register_async) Async action: Retrieve applied config: bridge nfs started restore-net::DEBUG::2021-07-30 12:34:56,091::context::144::root::(register_async) Async action: Retrieve applied config: bridge servers started restore-net::DEBUG::2021-07-30 12:34:56,091::context::144::root::(register_async) Async action: Retrieve applied config: bridge virbr0 started restore-net::DEBUG::2021-07-30 12:34:56,092::context::153::root::(finish_async) Async action: Retrieve applied config: ethernet enP48p1s0f2 finished restore-net::DEBUG::2021-07-30 12:34:56,093::context::153::root::(finish_async) Async action: Retrieve applied config: ethernet enP48p1s0f3 finished restore-net::DEBUG::2021-07-30 12:34:56,093::context::153::root::(finish_async) Async action: Retrieve applied config: bridge xcat-nodes3 finished restore-net::DEBUG::2021-07-30 12:34:56,094::context::153::root::(finish_async) Async action: Retrieve applied config: bridge xcat-other finished restore-net::DEBUG::2021-07-30 12:34:56,095::context::153::root::(finish_async) Async action: Retrieve applied config: bridge xcat-nodes4 finished restore-net::DEBUG::2021-07-30 12:34:56,096::context::153::root::(finish_async) Async action: Retrieve applied config: bridge ovirtmgmt finished restore-net::DEBUG::2021-07-30 12:34:56,097::context::153::root::(finish_async) Async action: Retrieve applied config: bond bond0 finished restore-net::DEBUG::2021-07-30 12:34:56,098::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.192 finished restore-net::DEBUG::2021-07-30 12:34:56,099::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.2020 finished restore-net::DEBUG::2021-07-30 12:34:56,099::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.2022 finished restore-net::DEBUG::2021-07-30 12:34:56,100::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.2024 finished restore-net::DEBUG::2021-07-30 12:34:56,100::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.172 finished restore-net::DEBUG::2021-07-30 12:34:56,101::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.2021 finished restore-net::DEBUG::2021-07-30 12:34:56,101::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.2023 finished restore-net::DEBUG::2021-07-30 12:34:56,102::context::153::root::(finish_async) Async action: Retrieve applied config: vlan bond0.200 finished restore-net::DEBUG::2021-07-30 12:34:56,102::context::153::root::(finish_async) Async action: Retrieve applied config: bridge xcat-nodes1 finished restore-net::DEBUG::2021-07-30 12:34:56,103::context::153::root::(finish_async) Async action: Retrieve applied config: bridge xcat-nodes2 finished restore-net::DEBUG::2021-07-30 12:34:56,105::context::153::root::(finish_async) Async action: Retrieve applied config: bridge nfs finished restore-net::DEBUG::2021-07-30 12:34:56,106::context::153::root::(finish_async) Async action: Retrieve applied config: bridge servers finished restore-net::DEBUG::2021-07-30 12:34:56,107::context::153::root::(finish_async) Async action: Retrieve applied config: bridge virbr0 finished restore-net::ERROR::2021-07-30 12:34:56,167::restore_net_config::462::root::(restore) restoration failed. Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/network/restore_net_config.py", line 460, in restore unified_restoration() File "/usr/lib/python3.6/site-packages/vdsm/network/restore_net_config.py", line 112, in unified_restoration classified_conf = _classify_nets_bonds_config(available_config) File "/usr/lib/python3.6/site-packages/vdsm/network/restore_net_config.py", line 237, in _classify_nets_bonds_config net_info = NetInfo(netswitch.configurator.netinfo()) File "/usr/lib/python3.6/site-packages/vdsm/network/netswitch/configurator.py", line 323, in netinfo _netinfo = netinfo_get(vdsmnets, compatibility) File "/usr/lib/python3.6/site-packages/vdsm/network/netinfo/cache.py", line 268, in get return _get(vdsmnets) File "/usr/lib/python3.6/site-packages/vdsm/network/netinfo/cache.py", line 76, in _get extra_info.update(_get_devices_info_from_nmstate(state, devices)) File "/usr/lib/python3.6/site-packages/vdsm/network/netinfo/cache.py", line 165, in _get_devices_info_from_nmstate nmstate.get_interfaces(state, filter=devices) File "/usr/lib/python3.6/site-packages/vdsm/network/netinfo/cache.py", line 164, in <dictcomp> for ifname, ifstate in six.viewitems( File "/usr/lib/python3.6/site-packages/vdsm/network/nmstate/api.py", line 228, in is_dhcp_enabled return util_is_dhcp_enabled(family_info) File "/usr/lib/python3.6/site-packages/vdsm/network/nmstate/bridge_util.py", line 137, in is_dhcp_enabled return family_info[InterfaceIP.ENABLED] and family_info[InterfaceIP.DHCP] KeyError: 'dhcp' The engine is fencing the machine constantly but it reboots and come back with the same issue after reboot. Thanks all.

3 4

CPU performance test results in three scenarios
by Tommy Sway 03 Aug '21

03 Aug '21

Hello, I recently conducted a test to compare the CPU performance of a physical machine, a high performance VM (pass-through CPU, PIN CPU), and a common VM. Here are the results: 1. Physical machine: # sysbench --test=cpu --cpu-max-prime=100000000 --threads=2 run WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options. sysbench 1.0.17 (using system LuaJIT 2.0.4) Running the test with following options: Number of threads: 2 Initializing random number generator from current time Prime numbers limit: 100000000 Initializing worker threads... Threads started! CPU speed: events per second: 0.01 General statistics: total time: 346.0588s total number of events: 2 Latency (ms): min: 345943.52 avg: 346001.09 max: 346058.65 95th percentile: 100000.00 sum: 692002.17 Threads fairness: events (avg/stddev): 1.0000/0.00 execution time (avg/stddev): 346.0011/0.06 2. High Performance VM: # sysbench --test=cpu --cpu-max-prime=100000000 --threads=2 run WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options. sysbench 1.0.17 (using system LuaJIT 2.0.4) Running the test with following options: Number of threads: 2 Initializing random number generator from current time Prime numbers limit: 100000000 Initializing worker threads... Threads started! CPU speed: events per second: 0.01 General statistics: total time: 351.8625s total number of events: 2 Latency (ms): min: 351416.59 avg: 351639.01 max: 351861.43 95th percentile: 100000.00 sum: 703278.02 Threads fairness: events (avg/stddev): 1.0000/0.00 execution time (avg/stddev): 351.6390/0.22 3. Common VM: # sysbench --test=cpu --cpu-max-prime=100000000 --threads=2 run WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options. sysbench 1.0.17 (using system LuaJIT 2.0.4) Running the test with following options: Number of threads: 2 Initializing random number generator from current time Prime numbers limit: 100000000 Initializing worker threads... Threads started! CPU speed: events per second: 0.01 General statistics: total time: 354.9108s total number of events: 2 Latency (ms): min: 354761.26 avg: 354835.99 max: 354910.73 95th percentile: 100000.00 sum: 709671.99 Threads fairness: events (avg/stddev): 1.0000/0.00 execution time (avg/stddev): 354.8360/0.07 Result: There is little difference in CPU performance between these three scenarios, so why distinguish between high performance and regular virtual machines? I don't think it makes much sense.

3 3

The provided authorization grant for the auth code has expired.
by Nicolás 02 Aug '21

02 Aug '21

Hi, A time ago I posted a similar question and I couldn't get it solved. I couldn't spend more time on this up until now, so I'm trying again and having the same error, which I'm unable to fix. I would really appreciate some help since I cannot find any documentation for this. I'm restoring a full ovirt engine backup, having used the --scope=all option, for oVirt 4.3. I restored the backup on a fresh CentOS7 machine. The process went well, but when trying to log into the restored authentication system I get the following message which won't allow me to log in: The provided authorization grant for the auth code has expired. What does that mean and how can it be fixed? I'm also attaching a screenshot. Thanks. Nicolás

2 1

Question about cloud-init
by tommy 02 Aug '21

02 Aug '21

Hello, I have a question about cloud-init: After installing vm, I installed cloud-init immediately, and enabled its four services, and then I can use cloud-init in the admin interface. However, I don't know how cloud-init knows where to get the relevant information (such as host name, SSH secret key, etc.) that I configured on the admin interface ? For I haven't configured the data source for cloud-init. Why it can works ? Thanks!

3 5

Re: adding new host failed with error "CPU does not match the Cluster CPU Type"
by j o 02 Aug '21

02 Aug '21

When I run lscpu it shows the nx and vmx flags are present. Vitialization is enable in bios. I have vms running. Sent from my iPhone

1 0

Question about pci pass-thru
by Tony Pearce 02 Aug '21

02 Aug '21

I have recently added a fresh installed host on 4.4, with 3 x nvidia gpu's which have been passed through to a guest VM instance. The host also has a 1TB nvme SSD drive which we are using for the host OS install and /var/ partition size was modified to allow maximum space for the guest, the intent is to give maximum space to a guest for fast SSD storage. Because this is a partition, I have about 700GB that can be added or mapped to a guest "disk" image that is locked to the host. After doing the above and after learning how simple it was to map the three GPUs in pass-through mode, my question is - can I simply map a PCI SSD through to a guest in the same fashion as the GPUs? I have not yet tried and do not find much results via google search. The intent on this would be to provision the whole SSD to the guest (instead of using the SSD for the host OS and some of that space for a guest (disk) image. In this case I would use another disk for the host OS but that is fine. Has anyone done such a thing (PCI SSD passthrough) and are there any concerns? (apart from the normal concerns with VM and host passthrough) Kind regards, Tony Pearce

1 0

Set fixed VNC/Spice Password for VMs.
by Merlin Timm 02 Aug '21

02 Aug '21

Good day to all, I have a question about the console configuration of the VMs: By default, for each console connection to a VM, a password is set for 120 seconds, after that you can't use it again. We currently have the following concern: We want to access and control the VMs via the VNC/Spice of the Ovirt host. We have already tried to use the password from the console.vv for the connection and that works so far. Unfortunately we have to do this every 2 minutes when we want to connect again. We are currently building an automatic test pipeline and for this we need to access the VMs remotely before OS start and we want to be independent of a VNC server on the guest. This is only possible if we could connect to the VNC/Spice server from the Ovirt host. My question: would it be possible to fix the password or read it out via api every time you want to connect? I would appreciate a reply very much! Best regards Merlin Timm

5 12

Happy SysAdmin Day!
by Strahil Nikolov 02 Aug '21

02 Aug '21

Happy SysAdmin Day! I want to thank Duck and wish to all fellow SysAdmins in the oVirt community a Happy Holliday ! Best Regards,Strahil Nikolov

3 2

adding new host failed with error "CPU does not match the Cluster CPU Type lscpu"
by jimod4＠yahoo.com 01 Aug '21

01 Aug '21

i get the below error when i try to add a new kvm host to the cluster. I know that the cpu is a haswell. if i run "virsh capabilities" it returns <model>Haswell-noTSX-IBRS</model>. My KVM server is redhat 8.4 fully patched today on an DL-360 Gen9. oVirt is at 4.4.7.7-1.el8. i have tried many diffent CPU settings for the cluster and none of them work. this is new oVirt install. ERROR: "The host CPU does not match the Cluster CPU Type and is running in a degraded mode. It is missing the following CPU flags: vmx, model_Haswell-noTSX, nx. Please update the host CPU microcode or change the Cluster CPU Type." MIRCOCODE: root@kvm09 ~]# dmesg | grep 'microcode' [ 0.000000] microcode: microcode updated early to revision 0x46, date = 2021-01-27 [ 1.625108] microcode: sig=0x306f2, pf=0x1, revision=0x46 [ 1.625753] microcode: Microcode Update Driver: v2.2.

1 0

Change lease storage domain while VM running
by Gianluca Cecchi 01 Aug '21

01 Aug '21

Hello, on a 4.4.6 environment where I'm moving storage I want to change the lease domain for an HA VM. The VM is running and if I go and edit, change sd and then press ok button, I get a window with: " Changes that can be applied immediately: VM Lease " I don't select the "apply later" check box. But then instead when I confirm, I get an error window with: " vm_name: Cannot edit VM. Hot swapping of VM leases is not supported, please remove the current lease and then set a new one. " Possibly it is possible to hot add a lease but not swap? So I think the first window should be changed. Is this a known issue? No problem if I change the lease storage domain while the VM is powered off. I don't know if it is already fixed in 4.4.7... I'm going to check next days.. Gianluca

3 2

Re: Upload Image to NFS Storage Domain Doesn't Work
by Eyal Shenitzky 01 Aug '21

01 Aug '21

+Bella Khizgiyaev <bkhizgiy(a)redhat.com> can you please take a look? On Fri, 30 Jul 2021 at 16:15, Nur Imam Febrianto <nur_imam(a)outlook.com> wrote: > Hi, > > > > Lastly in 4.4.6, I have a problem that I couldn’t upload any image to > storage domain without clicking Test Connection. Well, after it was > acknowledge as a bug and solved at 4.4.7 now I have similar issue. If I > upload any image to Storage Domain that uses NFS it only show locked, and > then showing OK even if no data are uploaded (can confirm 5GB ISO showing > OK after only 1 second). This issue only occurs with NFS backend, another > storage domain that uses iSCSI work fine though. Any idea how to solve this > ? I’m using NFS Storage Domain for storing ISO and this issue bugged me all > the time. > > > > Thanks before. > > > > Regards, > > > > Nur Imam Febrianto > > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/ACUKBWAM2ORQZ… > -- Regards, Eyal Shenitzky

1 0

Re: Upload Image to NFS Storage Domain Doesn't Work
by Strahil Nikolov 31 Jul '21

31 Jul '21

When the web UI reports OK (after that 1 sec), do you see a file with the same uuid on that nfs storage ? Maybe you can give some stat output of the file. Best Regards,Strahil Nikolov On Fri, Jul 30, 2021 at 16:15, Nur Imam Febrianto<nur_imam(a)outlook.com> wrote:  Hi, Lastly in 4.4.6, I have a problem that I couldn’t upload any image to storage domain without clicking Test Connection. Well, after it was acknowledge as a bug and solved at 4.4.7 now I have similar issue. If I upload any image to Storage Domain that uses NFS it only show locked, and then showing OK even if no data are uploaded (can confirm 5GB ISO showing OK after only 1 second). This issue only occurs with NFS backend, another storage domain that uses iSCSI work fine though. Any idea how to solve this ? I’m using NFS Storage Domain for storing ISO and this issue bugged me all the time. Thanks before. Regards, Nur Imam Febrianto _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ACUKBWAM2ORQZ…

2 1

How many servers do I need to run oVirt?
by rp.neuli＠yahoo.com 31 Jul '21

31 Jul '21

Hello, sorry for a very basic question. But I searched the net for the basic answer and did not get it. How many servers do I need to run oVirt software? I understand I can access management GUI from anywhere on subnet but naming and they it is explained is confusing to me. I am planning to buy a bigger server (just one to use as compute host) with dual cpu and about 64GB RAM. I am thinking to run my webservers as VM on this proposed machine. I thought it was a level 1 hypervisor (then why does it say some places that I need CentOS or RH on my server?) I also have a FreeNAS server, I was thinking if it was possible to keep my VMs stored on there and run/load/execute them on this so-called-compute server. Will I have to build and keep my VMs (when powered down) on oVirt machine only? finally what will I loose in comparison to free vSphere, if I select oVirt? Thank you. Rajeev

2 1

Changing the Password Expiration for a User
by louisb＠ameritech.net 31 Jul '21

31 Jul '21

I've create a new user using ovirt-aaa-jdbc-tool, I'm unable to use the account because the password expiration date has passed. I'm now trying to change the password expiration using the following command: sudo ovirt-aaa-jdbc-tool user edit --password-valid-to=2025-12-31 00:00:00 The above command is not working, I've tried several different formats using double quotes and single quotes, onluy using the date without the time. I've not been able to get anything working, what format should the above command be in? Thanks

2 3

VM CPU Topology
by nelson.lameiras＠lyra-network.com 30 Jul '21

30 Jul '21

Hello, We are currently running oVirt 4.3.10 Our oVirt hypervisors (HV) have 2 cpu sockets * 6 cores * HT = 24 vcpu Our VMs (centos7) range globally from 2vcpu to 8vcpu oVirt allows to configure - per VM - the following 3 advanced parameters : virtual_sockets : cores_per_virtual_socket : threads_per_core We make sure that threads per core is always 1 (so no question there) But, for the other 2 parameters, we are unsure of the correct configuration, and if there is a performance penalty on bad configuration. Let's consider a 4vcpu VM 1- Is there a performance difference betwenn 1:4:1 and 4:1:1 configuration ? 2- When should we opt for one or another configuration ? 2- Our VMs total CPU provisionning sum is twice the hypervisors capacity, but they are mostly idle so it is not an issue, but can this influence configuration choice above ? Thank you for any information that can enlighthen us, since we are worried that we are suffering from bad performance due to naive cpu configuration choices.

3 3

.htpasswd for ovirt web-ui
by marc.pfaendler＠fds-consulting.ch 30 Jul '21

30 Jul '21

Hello I want to add a password using .htpasswd file on my ovirt web-ui. I tried - htpasswd -cm ./.htpasswd username - to add a .htpasswd file in /usr/share/ovirt-engine/ovirt-web-ui.war. This doesn't work though would have been to easy right. ; ) Any ideas how I could achieve this? Thx

1 0

Upload Image to NFS Storage Domain Doesn't Work
by Nur Imam Febrianto 30 Jul '21

30 Jul '21

Hi, Lastly in 4.4.6, I have a problem that I couldn’t upload any image to storage domain without clicking Test Connection. Well, after it was acknowledge as a bug and solved at 4.4.7 now I have similar issue. If I upload any image to Storage Domain that uses NFS it only show locked, and then showing OK even if no data are uploaded (can confirm 5GB ISO showing OK after only 1 second). This issue only occurs with NFS backend, another storage domain that uses iSCSI work fine though. Any idea how to solve this ? I’m using NFS Storage Domain for storing ISO and this issue bugged me all the time. Thanks before. Regards, Nur Imam Febrianto

1 0

[ANN] oVirt 4.4.8 Third Release Candidate is now available for testing
by Lev Veyde 30 Jul '21

30 Jul '21

oVirt 4.4.8 Third Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.8 Third Release Candidate for testing, as of July 30th, 2021. This update is the eighth in a series of stabilization updates to the 4.4 series. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.4 or similar * CentOS Stream 8 * oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available based on CentOS Stream 8 - oVirt Node NG is already available based on CentOS Stream 8 Additional Resources: * Read more about the oVirt 4.4.8 release highlights: http://www.ovirt.org/release/4.4.8/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.8/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

This year conference community updates
by Sandro Bonazzola 30 Jul '21

30 Jul '21

Hi, as announced we are going to have oVirt online conference coming in September. I would like to give usual community updates in and as part of that I'd like to report about oVirt downstream products (such as Red Hat Virtualization and Oracle Linux Virtualization Manager) and about companies using oVirt. I could just go googling and guessing by e-mail traffic on oVirt users list but I want to try a different approach this year. So, if you are shipping an oVirt downstream or if you're using oVirt and you'd like to get the company nominated during the community reports please let me know off-list. Also I'd like to remind that oVirt site has a section dedicated to user stories, if you want to share yours you can either push it to https://github.com/oVirt/ovirt-site or get in touch with me off-list to get help getting your story published. Thanks, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 1

About the cluster compatibility version
by tommy 30 Jul '21

30 Jul '21

From the document: oVirt clusters have a compatibility version. The cluster compatibility version indicates the features of oVirt supported by all of the hosts in the cluster. The cluster compatibility is set according to the version of the least capable host operating system in the cluster. I didn't quite understand the last sentence. How can the version of the cluster be determined based on the operating system version of the host? Should the cluster compatibility version be determined based on the version of the oVirt engine on the host?

3 5

About the oVirt Document
by tommy 30 Jul '21

30 Jul '21

Why don't the documents displayed on the site match the specific software version? Different versions have different functions, but the document does not show the version number, which is very bad for learning.

2 1

New User not Showing in the web GUI
by louisb＠ameritech.net 30 Jul '21

30 Jul '21

I've added a new user using the CLI ovirt-aaa-jdbc-tool. I've also been able to modify the attributes of the new user and list all the modifications. However the new user does ot show up in the web GUI, a password has been assigned and the user is assigned to the '*' Name Space. What must be done to have the user show up in the web gui? Thanks

3 4

Re: oVirt and ARM
by Sandro Bonazzola 29 Jul '21

29 Jul '21

Marko, Joey, Zhenyu, maybe worth preparing a feature proposal for oVirt 4.5.0 for aarch64 support (see https://github.com/oVirt/ovirt-site/pull/2549 as example) Il giorno gio 15 lug 2021 alle ore 10:38 Marko Vrgotic < M.Vrgotic(a)activevideo.com> ha scritto: > Thank you all. > > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174 > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > > > *From: *Arik Hadas <ahadas(a)redhat.com> > *Date: *Wednesday, 14 July 2021 at 15:26 > *To: *Milan Zamazal <mzamazal(a)redhat.com> > *Cc: *Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Sandro Bonazzola < > sbonazzo(a)redhat.com>, Evgheni Dereveanchin <ederevea(a)redhat.com>, Zhenyu > Zheng <zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com>, > users(a)ovirt.org <users(a)ovirt.org> > *Subject: *Re: oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do not > click links or open attachments unless you recognize the sender!!!*** > > > > > > On Wed, Jul 14, 2021 at 3:14 PM Milan Zamazal <mzamazal(a)redhat.com> wrote: > > Arik Hadas <ahadas(a)redhat.com> writes: > > > On Wed, Jul 14, 2021 at 10:36 AM Milan Zamazal <mzamazal(a)redhat.com> > wrote: > > > >> Marko Vrgotic <M.Vrgotic(a)activevideo.com> writes: > >> > >> > Dear Arik and Milan, > >> > > >> > In the meantime, I was asked to check if in current 4.4 version or > >> > coming 4.5, are/will there any capabilities or options of emulating > >> > aarch64 on x86_64 platform and if so, what would be the steps to > >> > test/enable it. > >> > > >> > Can you provide some information? > >> > >> Hi Marko, > >> > >> I don't think there is a way to emulate a non-native architecture. > >> Engine doesn't have ARM support and it cannot handle ARM (native or > >> emulated) hosts. You could try to run emulated ARM VMs presented as x86 > >> to Engine using Vdsm hooks but I doubt it would work. > >> > > > > Oh I just sent a draft I had in my mailbox without noticing this comment > > and I see we both mentioned Vdsm hook > > What is the source of the doubts about Vdsm hooks to work for this? > > It's possible to override the domain XML obtained from Engine to change > it from x86 to ARM but Engine will get back the non-x86 domain XML. > Engine may not care about the emulator but perhaps it can be confused by > the reported CPU etc. There can be problems with devices and > architecture specific settings in both the directions. Engine will base > assumptions about the VM capabilities based on x86, which won't exactly > match ARM. > > > > Yeah, it would be best to try and see what the misalignment between what > the engine thinks and what the VM runs with leads to > > But from the top of my head I don't think a misalignment in regards to CPU > or capabilities could be problematic since the engine doesn't check what > the VM is actually set with, it just assumes that the VM is set with what > it wrote to its domain XML > > The engine certainly looks at the devices but as long as they preserve > their user-alias, managed devices won't be unplugged. Other devices would > be added as unmanaged. So I think that should also be fine. > > > > > Maybe it'd be possible to simply run and stop a VM with some effort and > it would be enough for certain purposes. But for more than that it's a > question whether the effort would be better spent on implementing a > proper architecture support. > > > >> I'm afraid the only way is to add ARM support to oVirt. My former > >> colleague has played with running oVirt on Raspberry Pi hosts some years > >> ago (there are traces of that effort in Vdsm) and I think adding ARM > >> support should be, at least in theory, possible. Particular features > >> available would be mostly dependent on ARM support in QEMU and libvirt. > > > > > >> Regards, > >> Milan > >> > >> > ----- > >> > kind regards/met vriendelijke groeten > >> > > >> > Marko Vrgotic > >> > Sr. System Engineer @ System Administration > >> > > >> > ActiveVideo > >> > o: +31 (35) 6774131 > >> > m: +31 (65) 5734174 > >> > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > >> > w: www.activevideo.com<http://www.activevideo.com> > >> > > >> > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > >> > 1.1217 WJ Hilversum, The Netherlands. The information contained in > >> > this message may be legally privileged and confidential. It is > >> > intended to be read only by the individual or entity to whom it is > >> > addressed or by their designee. If the reader of this message is not > >> > the intended recipient, you are on notice that any distribution of > >> > this message, in any form, is strictly prohibited. If you have > >> > received this message in error, please immediately notify the sender > >> > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > >> > delete or destroy any copy of this message. > >> > > >> > > >> > > >> > From: Sandro Bonazzola <sbonazzo(a)redhat.com> > >> > Date: Friday, 9 July 2021 at 15:37 > >> > To: Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Arik Hadas > >> > <ahadas(a)redhat.com>, Milan Zamazal <mzamazal(a)redhat.com> > >> > Cc: Evgheni Dereveanchin <ederevea(a)redhat.com>, Zhenyu Zheng > >> > <zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com>, > >> > users(a)ovirt.org <users(a)ovirt.org> > >> > Subject: Re: [ovirt-users] oVirt and ARM > >> > > >> > ***CAUTION: This email originated from outside of the organization. Do > >> > not click links or open attachments unless you recognize the > >> > sender!!!*** > >> > > >> > > >> > Il giorno ven 9 lug 2021 alle ore 11:00 Marko Vrgotic > >> > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha > >> > scritto: > >> > Hi Sandro and the rest of oVirt gurus, > >> > > >> > My managers are positive regarding helping provide some ARM hardware, > >> > but it would not happened earlier than three months from now, as we > >> > are in process of establishing certain relationship with ARM HW > >> > vendor. > >> > > >> > T news! > >> > > >> > > >> > In the meantime, I was asked to check if in current 4.4 version or > >> > coming 4.5, are/will there any capabilities or options of emulating > >> > aarch64 on x86_64 platform and if so, what would be the steps to > >> > test/enable it. > >> > > >> > +Arik Hadas<mailto:ahadas@redhat.com> , +Milan Zamazal<mailto: > >> mzamazal(a)redhat.com> ? > >> > > >> > > >> > Kindly awaiting your reply. > >> > > >> > Marko Vrgotic > >> > > >> > From: Marko Vrgotic <M.Vrgotic(a)activevideo.com<mailto: > >> M.Vrgotic(a)activevideo.com>> > >> > Date: Monday, 28 June 2021 at 15:38 > >> > To: Sandro Bonazzola > >> > <sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com>>, Evgheni > >> > Dereveanchin <ederevea(a)redhat.com<mailto:ederevea@redhat.com>> > >> > Cc: Zhenyu Zheng > >> > <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, Joey > Ma > >> > <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>>, > >> > users(a)ovirt.org<mailto:users@ovirt.org> > >> > <users(a)ovirt.org<mailto:users@ovirt.org>> > >> > Subject: Re: [ovirt-users] oVirt and ARM > >> > Hi Sandro, > >> > > >> > I will check with my managers if we have and could spare some hardware > >> > to contribute developing for oVirt. > >> > > >> > > >> > ----- > >> > kind regards/met vriendelijke groeten > >> > > >> > Marko Vrgotic > >> > Sr. System Engineer @ System Administration > >> > > >> > ActiveVideo > >> > o: +31 (35) 6774131 > >> > m: +31 (65) 5734174 > >> > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > >> > w: www.activevideo.com<http://www.activevideo.com> > >> > > >> > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > >> > 1.1217 WJ Hilversum, The Netherlands. The information contained in > >> > this message may be legally privileged and confidential. It is > >> > intended to be read only by the individual or entity to whom it is > >> > addressed or by their designee. If the reader of this message is not > >> > the intended recipient, you are on notice that any distribution of > >> > this message, in any form, is strictly prohibited. If you have > >> > received this message in error, please immediately notify the sender > >> > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > >> > delete or destroy any copy of this message. > >> > > >> > > >> > > >> > From: Sandro Bonazzola <sbonazzo(a)redhat.com<mailto: > sbonazzo(a)redhat.com>> > >> > Date: Friday, 25 June 2021 at 15:26 > >> > To: Marko Vrgotic > >> > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>>, > Evgheni > >> > Dereveanchin <ederevea(a)redhat.com<mailto:ederevea@redhat.com>> > >> > Cc: Zhenyu Zheng > >> > <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, Joey > Ma > >> > <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>>, > >> > users(a)ovirt.org<mailto:users@ovirt.org> > >> > <users(a)ovirt.org<mailto:users@ovirt.org>> > >> > Subject: Re: [ovirt-users] oVirt and ARM > >> > > >> > ***CAUTION: This email originated from outside of the organization. Do > >> > not click links or open attachments unless you recognize the > >> > sender!!!*** > >> > > >> > > >> > Il giorno ven 25 giu 2021 alle ore 14:20 Marko Vrgotic > >> > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha > >> > scritto: > >> > Hi Sandro, > >> > > >> > Thank you for the update. I am not equipped to help on development > >> > side, but I can most certainly do test deployments, once there is > >> > something available. > >> > > >> > We are big oVirt shop and moving to ARM64 with new product, it would > >> > be great if oVirt would start supporting it. > >> > > >> > If we are able to help somehow, let me know. > >> > > >> > I guess a start could be adding some arm64 machine to oVirt > >> > infrastructure so developers can build for it. > >> > You can have a look at > >> > https://ovirt.org/community/get-involved/donate-hardware.html > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fovirt.org…> > < > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fovirt.org… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fovirt.org…> > >> > > >> > Looping in +Evgheni Dereveanchin<mailto:ederevea@redhat.com> in case > >> you can share some resources. > >> > > >> > > >> > > >> > > >> > ----- > >> > kind regards/met vriendelijke groeten > >> > > >> > Marko Vrgotic > >> > Sr. System Engineer @ System Administration > >> > > >> > ActiveVideo > >> > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > >> > w: www.activevideo.com<http://www.activevideo.com> > >> > > >> > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > >> > 1.1217 WJ Hilversum, The Netherlands. The information contained in > >> > this message may be legally privileged and confidential. It is > >> > intended to be read only by the individual or entity to whom it is > >> > addressed or by their designee. If the reader of this message is not > >> > the intended recipient, you are on notice that any distribution of > >> > this message, in any form, is strictly prohibited. If you have > >> > received this message in error, please immediately notify the sender > >> > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > >> > delete or destroy any copy of this message. > >> > > >> > > >> > > >> > From: Sandro Bonazzola <sbonazzo(a)redhat.com<mailto: > sbonazzo(a)redhat.com>> > >> > Date: Thursday, 24 June 2021 at 18:21 > >> > To: Marko Vrgotic > >> > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>>, Zhenyu > >> > Zheng <zhengzhenyulixi(a)gmail.com<mailto:zhengzhenyulixi@gmail.com>>, > >> > Joey Ma <majunjiev(a)gmail.com<mailto:majunjiev@gmail.com>> > >> > Cc: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto: > >> users(a)ovirt.org>> > >> > Subject: Re: [ovirt-users] oVirt and ARM > >> > > >> > ***CAUTION: This email originated from outside of the organization. Do > >> > not click links or open attachments unless you recognize the > >> > sender!!!*** > >> > > >> > > >> > Il giorno gio 24 giu 2021 alle ore 16:34 Marko Vrgotic > >> > <M.Vrgotic(a)activevideo.com<mailto:M.Vrgotic@activevideo.com>> ha > >> > scritto: > >> > Hi oVirt, > >> > > >> > Where can I find if there are any information about oVirt supporting > >> arm64 CPU architecture? > >> > > >> > Right now oVirt is not supporting arm64. There was an initiative about > >> > supporting it started some time ago from openEuler ovirt SIG. > >> > I didn't got any further updates on this topic, looping in those who I > >> remember being looking into it. > >> > I think that if someone contributes arm64 support it would also be a > >> feature worth a 4.5 release :-) > >> > > >> > > >> > ----- > >> > kind regards/met vriendelijke groeten > >> > > >> > Marko Vrgotic > >> > Sr. System Engineer @ System Administration > >> > > >> > ActiveVideo > >> > o: +31 (35) 6774131 > >> > m: +31 (65) 5734174 > >> > e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> > >> > w: www.activevideo.com<http://www.activevideo.com> > >> > > >> > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein > >> > 1.1217 WJ Hilversum, The Netherlands. The information contained in > >> > this message may be legally privileged and confidential. It is > >> > intended to be read only by the individual or entity to whom it is > >> > addressed or by their designee. If the reader of this message is not > >> > the intended recipient, you are on notice that any distribution of > >> > this message, in any form, is strictly prohibited. If you have > >> > received this message in error, please immediately notify the sender > >> > and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and > >> > delete or destroy any copy of this message. > >> > > >> > > >> > _______________________________________________ > >> > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > >> > To unsubscribe send an email to users-leave(a)ovirt.org<mailto: > >> users-leave(a)ovirt.org> > >> > Privacy Statement: > >> > https://www.ovirt.org/privacy-policy.html > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > < > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > >> > > >> > oVirt Code of Conduct: > >> > https://www.ovirt.org/community/about/community-guidelines/ > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > < > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> > >> > > >> > List Archives: > >> > > >> > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MQ3XND2NKIL7V… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> > >> < > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> > >> > > >> > > >> > > >> > -- > >> > > >> > Sandro Bonazzola > >> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > >> > > >> > Red Hat > >> > EMEA< > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > >> > > >> > > >> > sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> > >> > Error! Filename not > >> > specified.< > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > >> > > >> > Red Hat respects your work life balance. Therefore there is no need to > >> > answer this email out of your office hours. > >> > > >> > > >> > > >> > -- > >> > > >> > Sandro Bonazzola > >> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > >> > > >> > Red Hat > >> > EMEA< > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > >> > > >> > > >> > sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> > >> > Error! Filename not > >> > specified.< > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > >> > > >> > Red Hat respects your work life balance. Therefore there is no need to > >> > answer this email out of your office hours. > >> > > >> > > >> > > >> > -- > >> > > >> > Sandro Bonazzola > >> > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > >> > > >> > Red Hat EMEA< > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > >> > > >> > > >> > sbonazzo(a)redhat.com<mailto:sbonazzo@redhat.com> > >> > [ > https://static.redhat.com/libs/redhat/brand-assets/2/corp/logo--200.png > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fstatic.re…> > >> ]< > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.redha…> > >> > > >> > Red Hat respects your work life balance. Therefore there is no need to > >> answer this email out of your office hours. > >> > < > >> > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmojo.redh… > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmojo.redh…> > >> > > >> > >> > > -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

Registration for oVirt 2021 online conference is now open!
by Sandro Bonazzola 29 Jul '21

29 Jul '21

Hi, The registration for oVirt 2021 online conference is now open! You can register now at https://www.eventbrite.it/e/ovirt-2021-online-conference-registration-16509… -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA sbonazzo(a)redhat.com Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.

1 0

cloning a template using Rest Api
by Pascal D 29 Jul '21

29 Jul '21

What is the easiest way to clone a template using rest api. I know I can create a VM from a template then make a new template from this new VM but I would like to just clone a template directly so I can maintain different branches TIA

2 1