- Users - oVirt List Archives

Unable to attach ISO domain to Datacenter
by Ivan de Gusmão Apolonio 13 Dec '19

13 Dec '19

I'm having trouble to create a storage ISO Domain and attach it to a Datacenter. It just give me this error message: Error while executing action Attach Storage Domain: Could not obtain lock Also the oVirt's Engine log files show this error message: "setsid: failed to execute /usr/bin/ionice: Permission denied", but I was unable to identify what exactly it's trying to do to get this permission denied. 2019-11-14 16:46:07,779-03 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-7388) [86161370-2aaa-4eff-9aab-c184bdf5bb98] EVENT_ID: IRS_BROKER_COMMAND_FAILURE(10,803), VDSM command AttachStorageDomainVDS failed: Cannot obtain lock: u"id=e6b34c42-0ca6-41f4-be3e-3c9b2af1747b, rc=1, out=[], err=['setsid: failed to execute /usr/bin/ionice: Permission denied']" This behavior just happens on ISO Domains, while Data Domains works fine. I have read oVirt documentation and searched everywhere but I was unable to find the solution for this issue. I'm using CentOS 7 with last update of all packages (oVirt version 4.3.6.7). Please help! Thanks, Ivan de Gusmão Apolonio

6 18

How to run oVirt on CentOS 8 (or 8.1 or Stream)
by Nate Revo 13 Dec '19

13 Dec '19

I have a system that requires the 4x kernel to run and wanted to run oVirt on top of CentOS. Seems as I'm looking around, rhel/centos 8 support for ovirt is slated for v 4.4. What's the progress with running on Centos 8+ and how do I run ovirt on Centos 8, now. Thanks in advance, -Nate Revo P.S. Will code for pizza -- Nathan Revo, RHCE OpenShift Specialist Solutions Architect Red Hat NorthWest Strategic <https://www.redhat.com/> nrevo(a)redhat.com M: 801-885-8182 <https://www.redhat.com/>

2 1

ovirt vdsm and networking
by kim.kargaard＠noroff.no 13 Dec '19

13 Dec '19

Hi, We are running CentOS and ovirt 4.3.4. We currently have four nodes and have set up the networks as follows: ovirtmanagmeent network - set up as a tagged vlan with a static IP SAN network - set up as a tagged vlan with a static IP student network - set up as a tagged vlan fw network - set up as a tagged vlan The ovirtmanagement and SAN networks were configured on the CentOS boxes during after installing CentOS and before adding the nodes as hosts. The student network and the fw network were configured through the ovirt admin panel. However, because of this, the student network is not assigned a static IP on the nodes and serves the VM's using the DHCP on the firewall. The ovirt management network is set as the display network and every time I try to change that to the student network, ovirt admin panel tells me that I can't because there is no IP address assigned to the student network vlan. I tried using ip addr add to add a static IP on the one CentOS node, but this does not get picked up by ovirt and of course ovirt controls the actual vlan files on the CentOS box through VDSM, so any changes I make there will likely just be overwritten. So, my question is, should I stop VDSM, add the IP to the vlan files on the CentOS nodes and then restart VDSM or is there a proper way of solving this? I need the Display Network to be set to the student network. Thank you for any help. Kim

3 3

oVirt 4.4.0 Alpha release is now available for testing
by Sandro Bonazzola 13 Dec '19

13 Dec '19

oVirt 4.4.0 Alpha release is now available for testing The oVirt Project is excited to announce the availability of the alpha release of oVirt 4.4.0 for testing, as of December 13th, 2019 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is an Alpha release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not to be used in production, and it is not feature complete. In particular, please note that upgrades from 4.3 and future upgrades from this alpha to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Alpha require content that will be available in CentOS Linux 8.1 which is currently being built from Red Hat Enterprise Linux 8.1. If you want to have a better experience you can test oVirt 4.4.0 Alpha on Red Hat Enterprise Linux 8.1. Known Issues - After installation open the Default cluster and hit “Save”, for any other new Cluster using CPU autodetection the dialog needs to be explicitly saved after the detection happens, after first host is added. (bug https://bugzilla.redhat.com/1770697) - Migrate, Cluster Upgrade, Export VM buttons cannot be clicked. Fixed in ovirt-engine-ui-extensions-1.0.11 Installation instructions For the engine: either use appliance or: - Install CentOS Linux 7.7 minimal from http://centos.mirror.garr.it/centos/7.7.1908/isos/x86_64/CentOS-7-x86_64-Mi… - yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - yum update (reboot if needed) - yum install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8.0 from http://centos.mirror.garr.it/centos/8.0.1905/isos/x86_64/CentOS-8-x86_64-19… ; select minimal installation - yum config-manager --set-enabled PowerTools - yum install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - yum update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Alpha? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but < 8.0) * CentOS Linux (or similar) 7.7 or later (but < 8.0) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.0 or later * CentOS Linux (or similar) 8.0 or later * oVirt Node 4.4 based on CentOS Linux 8.0 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

2 2

Re: Ovirt OVN help needed
by Strahil 13 Dec '19

13 Dec '19

Hi Dominik, Thanks for the reply. Sadly the openstack module is missing on the engine and I have to figure it out. Can't I just undeploy the ovn and then redeploy it back ? Best Regards, Strahil NikolovOn Dec 12, 2019 09:32, Dominik Holler <dholler(a)redhat.com> wrote: > > The cleanest way to clean up is to remove all entities on the OpenStack Network API on ovirt-provider-ovn, e.g. by something like > https://gist.github.com/dominikholler/19bcdc5f14f42ab5f069086fd2ff5e37#file… > This should work, if not, please report a bug. > > To bypass the ovirt-provider-ovn, which is not recommended and might end in an inconsistent state, you could use ovn-nbctl . > > > > On Thu, Dec 12, 2019 at 3:33 AM Strahil Nikolov <hunter86_bg(a)yahoo.com> wrote: >> >> Hi Community, >> >> can someone hint me how to get rid of some ports? I just want to 'reset' my ovn setup. >> >> Here is what I have so far: >> >> [root@ovirt1 openvswitch]# ovs-vsctl list interface >> _uuid : be89c214-10e4-4a97-a9eb-1b82bc433a24 >> admin_state : up >> bfd : {} >> bfd_status : {} >> cfm_fault : [] >> cfm_fault_status : [] >> cfm_flap_count : [] >> cfm_health : [] >> cfm_mpid : [] >> cfm_remote_mpids : [] >> cfm_remote_opstate : [] >> duplex : [] >> error : [] >> external_ids : {} >> ifindex : 35 >> ingress_policing_burst: 0 >> ingress_policing_rate: 0 >> lacp_current : [] >> link_resets : 0 >> link_speed : [] >> link_state : up >> lldp : {} >> mac : [] >> mac_in_use : "7a:7d:1d:a7:43:1d" >> mtu : [] >> mtu_request : [] >> name : "ovn-25cc77-0" >> ofport : 6 >> ofport_request : [] >> options : {csum="true", key=flow, remote_ip="192.168.1.64"} >> other_config : {} >> statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0} >> status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up} >> type : geneve >> >> _uuid : ec6a6688-e5d6-4346-ac47-ece1b8379440 >> admin_state : down >> bfd : {} >> bfd_status : {} >> cfm_fault : [] >> cfm_fault_status : [] >> cfm_flap_count : [] >> cfm_health : [] >> cfm_mpid : [] >> cfm_remote_mpids : [] >> cfm_remote_opstate : [] >> duplex : [] >> error : [] >> external_ids : {} >> ifindex : 13 >> ingress_policing_burst: 0 >> ingress_policing_rate: 0 >> lacp_current : [] >> link_resets : 0 >> link_speed : [] >> link_state : down >> lldp : {} >> mac : [] >> mac_in_use : "66:36:dd:63:dc:48" >> mtu : 1500 >> mtu_request : [] >> name : br-int >> ofport : 65534 >> ofport_request : [] >> options : {} >> other_config : {} >> statistics : {collisions=0, rx_bytes=0, rx_crc_err=0, rx_dropped=0, rx_errors=0, rx_frame_err=0, rx_over_err=0, rx_packets=0, tx_bytes=0, tx_dropped=0, tx_errors=0, tx_packets=0} >> status : {driver_name=openvswitch} >> type : internal >> >> _uuid : 1e511b4d-f7c2-499f-bd8c-07236e7bb7af >> admin_state : up >> bfd : {} >> bfd_status : {} >> cfm_fault : [] >> cfm_fault_status : [] >> cfm_flap_count : [] >> cfm_health : [] >> cfm_mpid : [] >> cfm_remote_mpids : [] >> cfm_remote_opstate : [] >> duplex : [] >> error : [] >> external_ids : {} >> ifindex : 35 >> ingress_policing_burst: 0 >> ingress_policing_rate: 0 >> lacp_current : [] >> link_resets : 0 >> link_speed : [] >> link_state : up >> lldp : {} >> mac : [] >> mac_in_use : "1a:85:d1:d9:e2:a5" >> mtu : [] >> mtu_request : [] >> name : "ovn-566849-0" >> ofport : 5 >> ofport_request : [] >> options : {csum="true", key=flow, remote_ip="192.168.1.41"} >> other_config : {} >> statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0} >> status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up} >> type : geneve >> >> >> When I try to remove a port - it never ends (just hanging): >> >> [root@ovirt1 openvswitch]# ovs-vsctl --dry-run del-port br-int ovn-25cc77-0 >> In journal I see only this: >> дек 12 04:13:57 ovirt1.localdomain ovs-vsctl[22030]: ovs|00001|vsctl|INFO|Called as ovs-vsctl --dry-run del-port br-int ovn-25cc77-0 >> >> The stranger part to me is the log output: >> >> [root@ovirt1 openvswitch]# grep ovn-25cc77-0 /var/log/openvswitch/*.log >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:26:28.642Z|00032|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 14 >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.646Z|00113|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 14 >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.861Z|00116|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 2 >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:50:36.678Z|00118|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 2 >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:52:31.180Z|00121|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 3 >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:55:09.734Z|00125|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 3 >> /var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:58:15.138Z|00127|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 6 >> >> I'm also attaching the verbose output of the dryrun. >> >> Thanks in advance. >> >> Best Regards, >> Strahil Nikolov >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IG7YJPINVAF2B…

2 1

Re: Still having NFS issues. (Permissions)
by Strahil 12 Dec '19

12 Dec '19

Why do you use 'all_squash' ? all_squashMap all uids and gids to the anonymous user. Useful for NFS-exported public FTP directories, news spool directories, etc. The opposite option is no_all_squash, which is the default setting. Best Regards, Strahil NikolovOn Dec 10, 2019 07:46, Tony Brian Albers <tba(a)kb.dk> wrote: > > On Mon, 2019-12-09 at 18:43 +0000, Robert Webb wrote: > > To add, the 757 permission does not need to be on the .lease or the > > .meta files. > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/KZF6RCSRW2QV3… > > Good morning, > > Check SELinux just in case. > > Here's my config: > > NFS server: > /etc/exports: > /data/ovirt > *(rw,sync,no_subtree_check,all_squash,anonuid=36,anongid=36) > > Folder: > [root@kst001 ~]# ls -ld /data/ovirt > drwxr-xr-x 3 vdsm kvm 76 Jun 1 2017 /data/ovirt > > Subfolders: > [root@kst001 ~]# ls -l /data/ovirt/* > -rwxr-xr-x 1 vdsm kvm 0 Dec 10 06:38 /data/ovirt/__DIRECT_IO_TEST__ > > /data/ovirt/a597d0aa-bf22-47a3-a8a3-e5cecf3e20e0: > total 4 > drwxr-xr-x 2 vdsm kvm 117 Jun 1 2017 dom_md > drwxr-xr-x 56 vdsm kvm 4096 Dec 2 14:51 images > drwxr-xr-x 4 vdsm kvm 42 Jun 1 2017 master > [root@kst001 ~]# > > > The user: > [root@kst001 ~]# id vdsm > uid=36(vdsm) gid=36(kvm) groups=36(kvm) > [root@kst001 ~]# > > And output from 'mount' on a host: > kst001:/data/ovirt on /rhev/data-center/mnt/kst001:_data_ovirt type nfs > (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,soft,nolock, > nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=<nfs- > server- > ip>,mountvers=3,mountport=20048,mountproto=udp,local_lock=all,addr=<nfs > -server-ip>) > > > HTH > > /tony > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/T6S32XNRB6S67…

3 2

Re: Still having NFS issues. (Permissions)
by Nir Soffer 12 Dec '19

12 Dec '19

On Tue, Dec 10, 2019 at 4:35 PM Robert Webb <rwebb(a)ropeguru.com> wrote: ... > >https://ovirt.org/develop/troubleshooting-nfs-storage-issues.html > > > >Generally speaking: > > > >Files there are created by vdsm (vdsmd), but are used (when running VMs) > >by qemu. So both of them need access. > > So the link to the NFS storage troubleshooting page is where I found that the perms needed to be 755. I think this is an error in the troubleshooting page. There is no reason to allow access to other users except vdsm:kvm. ... > Like this: > > drwxr-xr-x+ 2 vdsm kvm 4096 Dec 10 09:03 . > drwxr-xr-x+ 3 vdsm kvm 4096 Dec 10 09:02 .. > -rw-rw---- 1 vdsm kvm 53687091200 Dec 10 09:02 5a514067-82fb-42f9-b436-f8f93883fe27 > -rw-rw---- 1 vdsm kvm 1048576 Dec 10 09:03 5a514067-82fb-42f9-b436-f8f93883fe27.lease > -rw-r--r-- 1 vdsm kvm 298 Dec 10 09:03 5a514067-82fb-42f9-b436-f8f93883fe27.meta > > > So, with all that said, I cleaned everything up and my directory permissions look like what Tony posted for his. I have added in his export options to my setup and rebooted my host. > > I created a new VM from scratch and the files under images now look like this: > > drwxr-xr-x+ 2 vdsm kvm 4096 Dec 10 09:03 . > drwxr-xr-x+ 3 vdsm kvm 4096 Dec 10 09:02 .. > -rw-rw---- 1 vdsm kvm 53687091200 Dec 10 09:02 5a514067-82fb-42f9-b436-f8f93883fe27 > -rw-rw---- 1 vdsm kvm 1048576 Dec 10 09:03 5a514067-82fb-42f9-b436-f8f93883fe27.lease > -rw-r--r-- 1 vdsm kvm 298 Dec 10 09:03 5a514067-82fb-42f9-b436-f8f93883fe27.meta > > > Still not the 755 as expected, It is not expected, the permissions look normal. These are the permissions used for volumes on file based storage: lib/vdsm/storage/constants.py:FILE_VOLUME_PERMISSIONS = 0o660 but I am guessing with the addition of the "anonuid=36,anongid=36" to the exports, everything is now working as expected. The VM will boot and run as expected. There was nothing in the any of the documentation which alluded to possibly needed the additional options in the NFS export options. I this is a libvirt issue, it tries to access volumes as root, and without anonuid=36,anongid=36 it will be squashed to nobody and fail. Nir

1 1

Hosted Engine Failover Timing
by Robert Webb 12 Dec '19

12 Dec '19

So in doing some testing, I pulled the plug on my node where the hosted engine was running. Rough timing was about 3.5 minutes before the portal was available again. I searched around first, but could not find if there was any way to speed of the detection time in order to reboot the hosted engine quicker. Right now I am only testing this and will add in VM's later, which I understand should reboot a lot quicker.

1 0

Did a change in Ansible 2.9 in the ovirt_vm_facts module break the hosted-engine-setup?
by thomas＠hoberg.net 12 Dec '19

12 Dec '19

I am having problems installing a 3-node HCI cluster on machines that used to work fine.... and on a fresh set of servers, too. After a series of setbacks on a set of machines with failed installations and potentially failed clean-ups, I am ssing a fresh set of servers that had never run oVirt before. Patched to just before today's bigger changes (new kernel..) installation failed during the setup of the local hosted engine first and when I switched from GUi to script setup 'hosted-engine --deploy' *without* doing a cleanup this time, it progressed further to the point where the local VM had actually been teleported onto the (gluster based) cluster and is running there. In what seems the absolutely final action before adding the other two hosts, ansible is doing a finaly inventory of the virtual machine and collects facts or rather information (that's perhaps the breaking point) about that first VM before I would continue, only the data structure got renamed between ansible 2.8 and 2.9 according to this: https://fossies.org/diffs/ansible/2.8.5_vs_2.9.0rc1/lib/ansible/modules/clo… And the resulting error message from the /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-*.log file is: 2019-12-04 13:15:19,232+0000 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:107 fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_vms": [{"affinity_labels": [], "applications": [], "bios": {"boot_menu": {"enabled": false}, "type": "i440fx_sea_bios"}, "cdroms": [], "cluster": {"href": "/ovirt-engine/api/clusters/6616551e-1695-11ea-a86b-00163e34e004", "id": "6616551e-1695-11ea-a86b-00163e34e004"}, "comment": "", "cpu": {"architecture": "x86_64", "topology": {"cores": 1, "sockets": 4, "threads": 1}}, "cpu_profile": {"href": "/ovirt-engine/api/cpuprofiles/58ca604e-01a7-003f-01de-000000000250", "id": "58ca604e-01a7-003f-01de-000000000250"}, "cpu_shares": 0, "creation_time": "2019-12-04 13:01:12.780000+00:00", "delete_protected": false, "description": "", "disk_attachments": [], "display": {"address": "127.0.0.1", "allow_override": false, "certificate": {"content": "-----BEGIN CERTIFICATE-----(redacted)-----END CERTIFICATE-----\n", "organization": "***", "subject": "**"}, "copy_paste_enabled": true, "disconnect_action": "LOCK_SCREEN", "file_transfer_enabled": true, "monitors": 1, "port": 5900, "single_qxl_pci": false, "smartcard_enabled": false, "type": "vnc"}, "fqdn": "xdrd1001s.priv.atos.fr", "graphics_consoles": [], "guest_operating_system": {"architecture": "x86_64", "codename": "", "distribution": "CentOS Linux", "family": "Linux", "kernel": {"version": {"build": 0, "full_version": "3.10.0-1062.4.3.el7.x86_64", "major": 3, "minor": 10, "revision": 1062}}, "version": {"full_version": "7", "major": 7}}, "guest_time_zone": {"name": "GMT", "utc_offset": "+00:00"}, "high_availability": {"enabled": false, "priority": 0}, "host": {"href": "/ovirt-engine/api/hosts/75d096fd-4a2f-4ba4-b9fb-941f86daf624", "id": "75d096fd-4a2f-4ba4-b9fb-941f86daf624"}, "host_devices": [], "href": "/ovirt-engine/api/vms/dee6ec3b-5b4a-4063-ade9-12dece0f5fab", "id": "dee6ec3b-5b4a-4063-ade9-12dece0f5fab", "io": {"threads": 1}, "katello_errata": [], "la rge_icon": {"href": "/ovirt-engine/api/icons/9588ebfc-865a-4969-9829-d170d3654900", "id": "9588ebfc-865a-4969-9829-d170d3654900"}, "memory": 17179869184, "memory_policy": {"guaranteed": 17179869184, "max": 17179869184}, "migration": {"auto_converge": "inherit", "compressed": "inherit"}, "migration_downtime": -1, "multi_queues_enabled": true, "name": "external-HostedEngineLocal", "next_run_configuration_exists": false, "nics": [], "numa_nodes": [], "numa_tune_mode": "interleave", "origin": "external", "original_template": {"href": "/ovirt-engine/api/templates/00000000-0000-0000-0000-000000000000", "id": "00000000-0000-0000-0000-000000000000"}, "os": {"boot": {"devices": ["hd"]}, "type": "other"}, "permissions": [], "placement_policy": {"affinity": "migratable"}, "quota": {"id": "7af18f3a-1695-11ea-ab7e-00163e34e004"}, "reported_devices": [], "run_once": false, "sessions": [], "small_icon": {"href": "/ovirt-engine/api/icons/dec3572e-7465-4527-884b-f7c2eb2ed811", "id": "dec3572e-7465-4 527-884b-f7c2eb2ed811"}, "snapshots": [], "sso": {"methods": [{"id": "guest_agent"}]}, "start_paused": false, "stateless": false, "statistics": [], "status": "unknown", "storage_error_resume_behaviour": "auto_resume", "tags": [], "template": {"href": "/ovirt-engine/api/templates/00000000-0000-0000-0000-000000000000", "id": "00000000-0000-0000-0000-000000000000"}, "time_zone": {"name": "Etc/GMT"}, "type": "desktop", "usb": {"enabled": false}, "watchdogs": []}]}, "attempts": 24, "changed": false, "deprecations": [{"msg": "The 'ovirt_vm_facts' module has been renamed to 'ovirt_vm_info', and the renamed one no longer returns ansible_facts", "version": "2.13"}]} If that is the case, wouldn't that imply that there is no test case that covers the most typical HCI deployment when Ansible is updated? That would be truly frightening...

2 4

Re: ovirt 4.3.7 geo-replication not working
by Strahil 12 Dec '19

12 Dec '19

Hi Adrian, Have you checked the following link: https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infras… Best Regards, Strahil NikolovOn Dec 12, 2019 12:35, adrianquintero(a)gmail.com wrote: > > Hi Sahina/Strahil, > We followed the recommended setup from gluster documentation however one of my colleagues noticed a python entry in the logs, turns out it is a missing sym link to a library > > We created the following symlink to all the master servers (cluster 1 oVirt 1) and slave servers (Cluster 2, oVirt2) and geo-sync started working: > /lib64/libgfchangelog.so -> /lib64/libgfchangelog.so.0 > -------------------------------------------------------------------------------------------------------------------------------------------------------- > MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED > -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > host1.mydomain1.com geo-master /gluster_bricks/geo-master/geo-master root slave1.mydomain2.com::geo-slave slave1.mydomain2.com Active Changelog Crawl 2019-12-12 05:22:56 > host2.mydomain1.com geo-master /gluster_bricks/geo-master/geo-master root slave1.mydomain2.com::geo-slave slave2.mydomain2.com Passive N/A N/A > host3.mydomain1.com geo-master /gluster_bricks/geo-master/geo-master root slave1.mydomain2.com::geo-slave slave3.mydomain2.com Passive N/A N/A > -------------------------------------------------------------------------------------------------------------------------------------------------------- > we still require a bit more testing but at least it is syncing now. > > I am trying to find good documentation on how to achieve geo-replication for oVirt, is that something you can point me to? basically looking for a way to do Geo-replication from site A to Site B, but the Geo-Replication pop up window from ovirt does not seem to have the functionality to connect to a slave server from another oVirt setup.... > > > > As a side note, from the oVirt WEB UI the "cancel button" for the "New Geo-Replication" does not seem to work: storage > volumes > "select your volume" > "click 'Geo-Replication' > > Any good documentation you can point me to is welcome. > > thank you for the swift assistance. > > Regards, > > Adrian > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EQHPJ3AUTWMSC…

1 0