- Users - oVirt List Archives

Re: [Users] Upgrading ovirt-engine from Centos dre repo
by Neil 06 Aug '12

06 Aug '12

Hi guys, I've finally got round to running the engine-upgrade and it seems I've encountered an issue... On Thu, Aug 2, 2012 at 10:45 PM, Justin Clift <jclift(a)redhat.com> wrote: > On 02/08/2012, at 4:47 PM, Neil wrote: > <snip> >> We are running mission critical VM's on the install, so I can't risk >> something going wrong and the VM's stop running or access to them is >> lost. > > Ouch. :( > > I'm not all that in depth with oVirt, but do mess around with it a > bit for compatibility testing with Aeolus (a different project). > > From what I've seen so far, oVirt 3.0 is pretty stable, and I'd be > comfortable running VM's on that. > > oVirt 3.1 though... doesn't seem all that stable yet. Wouldn't > (personally) dare running anything even close to important on it. > > Hope you figure out a way to make things work. :) > > Regards and best wishes, > > Justin Clift > > -- > Aeolus Community Manager > http://www.aeolusproject.org > After eventually running "engine-upgrade --force-current-setup-rpm --no-yum-rollback" the upgrade script seems to have stopped at... Backing Up Database... [ DONE ] Rename Database... [ DONE ] Updating rpms... [ DONE ] Updating Database... [ DONE ] Restore Database name... [ DONE ] Running post install configuration... [ DONE ] Starting JBoss... Below is the log upgrade log. cat /var/log/ovirt-engine/ovirt-engine-upgrade_2012_08_06_14_41_17.log 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing pgpass file, fetching DB host value 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing pgpass file, fetching DB port value 2012-08-06 14:41:17::DEBUG::common_utils::576::root:: found existing pgpass file, fetching DB admin value 2012-08-06 14:41:17::INFO::dellsysid::23::trace.libsmbios_c._common:: ENTER _errorOnZeroFN(565, <_FuncPtr object at 0x140c1f0>, (), ) 2012-08-06 14:41:17::INFO::_common::55::trace.libsmbios_c._common:: RAN CTYPES FUNCTION: sysinfo_get_dell_system_id 2012-08-06 14:41:17::INFO::_common::54::trace.libsmbios_c._common:: LEAVE _errorOnZeroFN --> 565 2012-08-06 14:41:18::DEBUG::engine-upgrade::290::root:: Yum list updates started 2012-08-06 14:41:18::DEBUG::engine-upgrade::261::root:: Yum unlock started 2012-08-06 14:41:18::DEBUG::engine-upgrade::273::root:: Yum unlock completed successfully 2012-08-06 14:41:18::DEBUG::engine-upgrade::296::root:: Getting list of packages to upgrade 2012-08-06 14:42:39::DEBUG::engine-upgrade::248::root:: Yum lock started 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-genericapi' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-backend' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-jboss-deps' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-webadmin-portal' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-userportal' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-restapi' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-config' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-tools-common' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-notification-service' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::common_utils::286::root:: cmd = /bin/rpm -q ovirt-engine-genericapi ovirt-engine ovirt-engine-backend ovirt-engine-jboss-deps ovirt-engine-webadmin-portal ovirt-engine-userportal ovirt-engine-restapi ovirt-engine-config ovirt-engine-tools-common ovirt-engine-notification-service >> /etc/yum/pluginconf.d/versionlock.list 2012-08-06 14:42:39::DEBUG::common_utils::291::root:: output = 2012-08-06 14:42:39::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::engine-upgrade::258::root:: Yum lock completed successfully 2012-08-06 14:42:39::DEBUG::engine-upgrade::304::root:: 12 Packages marked for update: 2012-08-06 14:42:39::DEBUG::engine-upgrade::305::root:: ['ovirt-engine-3.1.0-3.15.el6.noarch', 'ovirt-engine-backend-3.1.0-3.15.el6.noarch', 'ovirt-engine-config-3.1.0-3.15.el6.noarch', 'ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch', 'ovirt-engine-genericapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-notification-service-3.1.0-3.15.el6.noarch', 'ovirt-engine-restapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-setup-3.1.0-3.15.el6.noarch', 'ovirt-engine-tools-common-3.1.0-3.15.el6.noarch', 'ovirt-engine-userportal-3.1.0-3.15.el6.noarch', 'ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch', 'vdsm-bootstrap-4.10.0-0.191.9.el6.noarch'] 2012-08-06 14:42:39::DEBUG::engine-upgrade::311::root:: Installed packages: 2012-08-06 14:42:39::DEBUG::engine-upgrade::312::root:: ['ovirt-engine-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64', 'ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64', 'vdsm-bootstrap-4.9.6-0.150.git63061a9.el6.noarch'] 2012-08-06 14:42:39::DEBUG::engine-upgrade::314::root:: Yum list updated completed successfully 2012-08-06 14:42:39::DEBUG::engine-upgrade::324::root:: Yum rollback-avail started 2012-08-06 14:42:39::DEBUG::engine-upgrade::330::root:: 12 Packages available in yum: 2012-08-06 14:42:39::DEBUG::engine-upgrade::331::root:: ['ovirt-engine-3.1.0-3.15.el6.noarch', 'ovirt-engine-backend-3.1.0-3.15.el6.noarch', 'ovirt-engine-config-3.1.0-3.15.el6.noarch', 'ovirt-engine-dbscripts-3.1.0-3.15.el6.noarch', 'ovirt-engine-genericapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-notification-service-3.1.0-3.15.el6.noarch', 'ovirt-engine-restapi-3.1.0-3.15.el6.noarch', 'ovirt-engine-setup-3.1.0-3.15.el6.noarch', 'ovirt-engine-tools-common-3.1.0-3.15.el6.noarch', 'ovirt-engine-userportal-3.1.0-3.15.el6.noarch', 'ovirt-engine-webadmin-portal-3.1.0-3.15.el6.noarch', 'vdsm-bootstrap-4.10.0-0.191.9.el6.noarch'] 2012-08-06 14:42:39::DEBUG::engine-upgrade::337::root:: ovirt-engine-3.1.0_0001-1.8.el6.x86_64 not available in yum 2012-08-06 14:42:39::DEBUG::engine-upgrade::162::root:: checking the status of jbossas service 2012-08-06 14:42:39::DEBUG::common_utils::309::root:: Executing command --> '/sbin/service jboss-as status' 2012-08-06 14:42:39::DEBUG::common_utils::335::root:: output = jboss-as is running (pid 6812) 2012-08-06 14:42:39::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:39::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:39::DEBUG::engine-upgrade::167::root:: jbossas service is up and running 2012-08-06 14:42:39::DEBUG::engine-upgrade::141::root:: asking user: Would you like to proceed? (yes|no): 2012-08-06 14:42:49::DEBUG::engine-upgrade::145::root:: user answered: yes 2012-08-06 14:42:49::DEBUG::engine-upgrade::477::root:: stopping jboss service. 2012-08-06 14:42:49::DEBUG::common_utils::309::root:: Executing command --> '/sbin/service jboss-as stop' 2012-08-06 14:42:50::DEBUG::common_utils::335::root:: output = Stopping jboss-as: [ OK ] 2012-08-06 14:42:50::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:50::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:50::DEBUG::engine-upgrade::516::root:: Verifing update is related to db 2012-08-06 14:42:50::DEBUG::engine-upgrade::523::root:: isUpdateRelatedToDb value is True 2012-08-06 14:42:50::DEBUG::engine-upgrade::414::root:: DB Backup started 2012-08-06 14:42:50::DEBUG::common_utils::309::root:: Executing command --> '/usr/bin/pg_dump -C -E UTF8 --column-inserts --disable-dollar-quoting --disable-triggers -U postgres -h localhost -p 5432 --format=p -f /usr/share/ovirt-engine/db-backups/ovirt-engine_db_backup_2012_08_06_14_41_18.sql engine' 2012-08-06 14:42:51::DEBUG::common_utils::335::root:: output = 2012-08-06 14:42:51::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:51::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:51::DEBUG::engine-upgrade::420::root:: DB Backup completed successfully 2012-08-06 14:42:51::DEBUG::common_utils::350::root:: running sql query 'ALTER DATABASE engine RENAME TO engine_2012_08_06_14_41_18' on db server: 'localhost'. 2012-08-06 14:42:51::DEBUG::common_utils::286::root:: cmd = /usr/bin/psql -h localhost -p 5432 -U postgres -d postgres -c "ALTER DATABASE engine RENAME TO engine_2012_08_06_14_41_18" 2012-08-06 14:42:51::DEBUG::common_utils::291::root:: output = ALTER DATABASE 2012-08-06 14:42:51::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:51::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:51::DEBUG::engine-upgrade::364::root:: Yum getLatestTid started 2012-08-06 14:42:51::DEBUG::common_utils::309::root:: Executing command --> '/usr/bin/yum history list ovirt-engine' 2012-08-06 14:42:51::DEBUG::common_utils::335::root:: output = Loaded plugins: dellsysid, fastestmirror, refresh-packagekit, security, : versionlock ID | Login user | Date and time | Action(s) | Altered ------------------------------------------------------------------------------- 7 | root <root> | 2012-05-23 18:38 | Install | 50 history list 2012-08-06 14:42:51::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:51::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:51::DEBUG::engine-upgrade::386::root:: Found TID: 7 2012-08-06 14:42:51::DEBUG::engine-upgrade::387::root:: Yum getLatestTid completed successfully 2012-08-06 14:42:51::DEBUG::engine-upgrade::261::root:: Yum unlock started 2012-08-06 14:42:51::DEBUG::engine-upgrade::273::root:: Yum unlock completed successfully 2012-08-06 14:42:51::DEBUG::engine-upgrade::281::root:: Yum update started 2012-08-06 14:42:51::DEBUG::common_utils::309::root:: Executing command --> '/usr/bin/yum update -q -y ovirt-engine-notification-service ovirt-engine-genericapi ovirt-engine ovirt-engine-tools-common ovirt-engine-backend ovirt-engine-iso-uploader ovirt-engine-jboss-deps ovirt-engine-log-collector ovirt-engine-userportal ovirt-engine-restapi ovirt-engine-config ovirt-engine-setup ovirt-engine-dbscripts vdsm-bootstrap ovirt-engine-webadmin-portal' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::engine-upgrade::284::root:: Yum update completed successfully 2012-08-06 14:42:56::DEBUG::engine-upgrade::248::root:: Yum lock started 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-genericapi' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-backend' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-jboss-deps' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-webadmin-portal' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-userportal' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-restapi' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-config' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-tools-common' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/bin/rpm -q ovirt-engine-notification-service' 2012-08-06 14:42:56::DEBUG::common_utils::335::root:: output = ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64 2012-08-06 14:42:56::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::common_utils::286::root:: cmd = /bin/rpm -q ovirt-engine-genericapi ovirt-engine ovirt-engine-backend ovirt-engine-jboss-deps ovirt-engine-webadmin-portal ovirt-engine-userportal ovirt-engine-restapi ovirt-engine-config ovirt-engine-tools-common ovirt-engine-notification-service >> /etc/yum/pluginconf.d/versionlock.list 2012-08-06 14:42:56::DEBUG::common_utils::291::root:: output = 2012-08-06 14:42:56::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:56::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:56::DEBUG::engine-upgrade::258::root:: Yum lock completed successfully 2012-08-06 14:42:56::DEBUG::engine-upgrade::516::root:: Verifing update is related to db 2012-08-06 14:42:56::DEBUG::engine-upgrade::523::root:: isUpdateRelatedToDb value is True 2012-08-06 14:42:56::DEBUG::engine-upgrade::445::root:: DB Update started 2012-08-06 14:42:56::DEBUG::common_utils::309::root:: Executing command --> '/usr/share/ovirt-engine/dbscripts/upgrade.sh -s localhost -p 5432 -u postgres -d engine_2012_08_06_14_41_18' 2012-08-06 14:42:57::DEBUG::common_utils::335::root:: output = database is up to date. Done. 2012-08-06 14:42:57::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:57::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:57::DEBUG::engine-upgrade::452::root:: DB Update completed successfully 2012-08-06 14:42:57::DEBUG::common_utils::350::root:: running sql query 'ALTER DATABASE engine_2012_08_06_14_41_18 RENAME TO engine' on db server: 'localhost'. 2012-08-06 14:42:57::DEBUG::common_utils::286::root:: cmd = /usr/bin/psql -h localhost -p 5432 -U postgres -d postgres -c "ALTER DATABASE engine_2012_08_06_14_41_18 RENAME TO engine" 2012-08-06 14:42:57::DEBUG::common_utils::291::root:: output = ALTER DATABASE 2012-08-06 14:42:57::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:57::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:57::DEBUG::engine-upgrade::491::root:: Running post script 2012-08-06 14:42:57::DEBUG::common_utils::678::root:: retrieving build number for ovirt-engine rpm 2012-08-06 14:42:57::DEBUG::common_utils::286::root:: cmd = rpm -q --queryformat '%{VERSION}-%{RELEASE}' ovirt-engine 2012-08-06 14:42:57::DEBUG::common_utils::291::root:: output = 3.1.0_0001-1.8.el6 2012-08-06 14:42:57::DEBUG::common_utils::292::root:: stderr = 2012-08-06 14:42:57::DEBUG::common_utils::293::root:: retcode = 0 2012-08-06 14:42:57::DEBUG::common_utils::654::root:: updating vdc option ProductRPMVersion to: 3.1.0_0001-1.8.el6 2012-08-06 14:42:57::DEBUG::common_utils::309::root:: Executing command --> '/usr/share/ovirt-engine/engine-config/engine-config -s ProductRPMVersion=3.1.0_0001-1.8.el6 --cver=general -p /usr/share/ovirt-engine/conf/engine-config-install.properties' 2012-08-06 14:42:58::DEBUG::common_utils::335::root:: output = 2012-08-06 14:42:58::DEBUG::common_utils::336::root:: stderr = 2012-08-06 14:42:58::DEBUG::common_utils::337::root:: retcode = 0 2012-08-06 14:42:58::DEBUG::engine-upgrade::494::root:: Post script completed successfully 2012-08-06 14:42:58::DEBUG::engine-upgrade::486::root:: starting jboss service. 2012-08-06 14:42:58::DEBUG::common_utils::309::root:: Executing command --> '/sbin/service jboss-as start' Any ideas what to try next? Thanks. Regards. Neil Wilson.

1 1

[Users] Live snapshots. About how far off is it?
by Karli Sjöberg 06 Aug '12

06 Aug '12

--_000_BC13E836E51C4C47ADF762C605812F8Fsluse_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, the subject says it all really. I=B4ve been setting up oVirt-3.1 and absolu= tely love it, I must say. There=B4s just that you have to take down a guest= to make snapshots that ticks me off a little. It disrupts production. So h= ow far off, 6 months, a year, two years? What priority has it on the roadma= p? Any response would appreciated, it makes it easier to plan a migration. Med V=E4nliga H=E4lsningar ---------------------------------------------------------------------------= ---- Karli Sj=F6berg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kron=E5sv=E4gen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjoberg(a)slu.se<mailto:karli.sjoberg@adm.slu.se> --_000_BC13E836E51C4C47ADF762C605812F8Fsluse_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html><head></head><body style=3D"word-wrap: break-word; -webkit-nbsp-mode:= space; -webkit-line-break: after-white-space; ">Hi,<div><br></div><div>the= subject says it all really. I=B4ve been setting up oVirt-3.1 and absolutel= y love it, I must say. There=B4s just that you have to take down a guest to= make snapshots that ticks me off a little. It disrupts production. So how = far off, 6 months, a year, two years? What priority has it on the roadmap? = Any response would appreciated, it makes it easier to plan a migration.<br>= <div> <span class=3D"Apple-style-span" style=3D"border-collapse: separate; color:= rgb(0, 0, 0); font-family: Helvetica; font-style: normal; font-variant: no= rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp= hans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; = white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizonta= l-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorati= ons-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-wi= dth: 0px; font-size: medium; "><div><br class=3D"Apple-interchange-newline"= ><br></div><div>Med V=E4nliga H=E4lsningar<br>-----------------------------= --------------------------------------------------<br>Karli Sj=F6berg<br>Sw= edish University of Agricultural Sciences<br>Box 7079 (Visiting Address Kro= n=E5sv=E4gen 8)<br>S-750 07 Uppsala, Sweden<br>Phone:  +46-(0)18-67 15= 66</div><div><a href=3D"mailto:karli.sjoberg@adm.slu.se">karli.sjoberg@slu= .se</a></div></span> </div> <br></div></body></html>= --_000_BC13E836E51C4C47ADF762C605812F8Fsluse_--

4 4

[Users] Looking for help: Demo videos
by Dave Neary 06 Aug '12

06 Aug '12

Hi everyone, Last week I pitched the idea of having some demo videos (I called them "screencasts" although that's not quite accurate) ready before the 3.1 release next week. I don't have the domain knowledge to do this myself, so I need your help! What is there to do? 1. Go to http://wiki.ovirt.org/wiki/Screencasts - have a look at the features I've proposed for the first round of videos. If you really think one of them shouldn't be there, or there's a really important feature you'd like to see a demo for, please reply here and we'll discuss it. You can always add a proposed feature with the skeleton template to the Screencasts page also, but there's no guarantee we'll have a video by the time the release comes around. It would helkp me prioritise if we could gather feedback here. 2. For each feature, we should have a scenario/script for the demo, including: * Required pre-requisites and set-up (what do I need to do before I start the demo) * A step by step description of how to show the feature being demoed Right now, only two features are described, and those descriptions may need work. If you see a feature which is not yet described, and you know how to use it, please add a little script following the template. If you see a feature which is not described well enough, please update the description. 3. For each feature with a script, we need a video. I have started a page to help people record videos of their screen, for the systems I know about: http://wiki.ovirt.org/wiki/Recording_video - the videos (without sound) can, I think, be attached to the wiki page - ogv or webm format preferably, please! 4. For each video, we will need a sound-track. I'm happy to voice over some of the videos, but again, it would be nice to spread the load. We're not even here yet, though. Thanks everyone for your help! It will be greatly appreciated. Regards, Dave. -- Dave Neary Community Action and Impact Open Source and Standards Team, Red Hat Phone: +33 9 50 71 55 62

3 2

[Users] Unable to start engine from rpm install.
by snmishra＠linux.vnet.ibm.com 04 Aug '12

04 Aug '12

Hi, I have been building and running engine on my dev machine from source. Today I tried to install and setup engine from RPM on another machine. I followed the procedure from http://wiki.ovirt.org/wiki/Installing_ovirt_from_rpm. But I get the following error - oVirt Engine will be installed using the following configuration: ================================================================= override-httpd-config: yes http-port: 80 https-port: 443 host-fqdn: ichigo-dom235.phx.austin.ibm.com auth-pass: ******** org-name: ibm default-dc-type: NFS db-remote-install: local db-local-pass: ******** config-nfs: no override-iptables: yes Proceed with the configuration listed above? (yes|no): yes Installing: Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ ERROR ] Error: Can't start the ovirt-engine service Please check log file /var/log/ovirt-engine/engine-setup_2012_08_03_16_16_41.log for more information And the log shows - 2012-08-03 18:08:56::DEBUG::engine-setup::1747::root:: config-nfs: no 2012-08-03 18:08:56::DEBUG::engine-setup::1747::root:: override-iptables: no 2012-08-03 18:08:56::ERROR::engine-setup::2376::root:: Traceback (most recent call last): File "/bin/engine-setup", line 2370, in <module> main(confFile) File "/bin/engine-setup", line 2159, in main runSequences() File "/bin/engine-setup", line 2105, in runSequences controller.runAllSequences() File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in runAllSequences sequence.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in run step.run() File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/bin/engine-setup", line 1535, in _startJboss srv.start(True) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 795, in start raise Exception(output_messages.ERR_FAILED_START_SERVICE % self.name) Exception: Error: Can't start the ovirt-engine service I verified that there was no java process running before starting 'engine-setup'. I also noticed that .../standalone/deployment/ directory only had a README file. Any Clues? -Sharad

2 1

[Users] Node as guest - Nested KVM
by Douglas Landgraf 04 Aug '12

04 Aug '12

This is a multi-part message in MIME format. --------------030900080005030708090405 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, I remember someone asking about this topic few weeks ago, here the steps: http://wiki.ovirt.org/wiki/Vdsm_Developers#Running_Node_as_guest_-_Nested_K… Enjoy and fell free to improve it! -- Cheers Douglas --------------030900080005030708090405 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Hi,<br> <br> I remember someone asking about this topic few weeks ago, here the steps:<br> <a href="http://wiki.ovirt.org/wiki/Vdsm_Developers#Running_Node_as_guest_-_Nested_K…">http://wiki.ovirt.org/wiki/Vdsm_Developers#Running_Node_as_guest_-_Nested_K…</a><br> <br> Enjoy and fell free to improve it!<br> <br> <pre class="moz-signature" cols="72">-- Cheers Douglas</pre> </body> </html> --------------030900080005030708090405--

3 2

[Users] User management broken in 3.0 ?
by Alex Leonhardt 03 Aug '12

03 Aug '12

This is a multi-part message in MIME format. --------------060207040707040004040507 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi there, I've been using 3.0 for some testing recently and was very confused by how to manage new users !? It doesnt seem to be possible to add more "local" users at all ? Or is there a document you can point me at ? Alex --------------060207040707040004040507 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <font size="-1"><font face="Tahoma">Hi there,<br> <br> I've been using 3.0 for some testing recently and was very confused by how to manage new users !? It doesnt seem to be possible to add more "local" users at all ? Or is there a document you can point me at ? <br> <br> Alex<br> <br> </font></font> </body> </html> --------------060207040707040004040507--

3 3

Re: [Users] Failure to migrate from one host out of four
by Karli Sjöberg 03 Aug '12

03 Aug '12

3 aug 2012 kl. 09.55 skrev Karli Sjöberg: > > 3 aug 2012 kl. 09.30 skrev Martin Kletzander: > >> On 08/02/2012 04:20 PM, Karli Sjöberg wrote: >>> Sorry man, I spoke too soon. It´s back again:( >>> >>> I´ve got another guest "stuck". It´s all for testing at this point, so I >>> can basically do anything I want with it, so I just shut it down and put >>> the host back into maintenance. I guess something must still have the >>> old locale written in some conf somewhere, set after it was installed. >>> Do you know where to start looking? >>> >> >> No problem, but I don't think it will be the locale again. BTW I took >> this off-list when I replied to you last time. Try looking at >> libvirtd.log again. If you don't find anything, then you can try sending >> it to me or libvirt-users list (if it is libvirt that's doing the >> problem, but I don't think so). >> >> Martin > > Well, hasty as I am, I thought that maybe it would be good to remove glibc and glib-common, and then installing again... Turns out that don´t work out too well, haha:) So I´m reinstalling it right now, and was careful to choose us_EN this time. Will keep you posted on how it turns out. After a clean reinstall and us_EN locale it´s working again, just as expected. I´ll still keep an eye on it though, just in case. /Karli

1 0

[Users] Managing Remote Access to Physical Workstations
by Randall Wood 03 Aug '12

03 Aug '12

I have an environment where I would like to be able to provide users with a single web interface from which they would be able to open a console on either a virtual machine or on a physical machine. Playing with a clean install of oVirt 3.1 suggests that oVirt is not capable of doing this. Has anyone successfully configured oVirt to provide this capability, or know of a system that could integrate with oVirt to meet that requirement? -- Randall Wood Alexandria Software http://www.alexandriasoftware.com randall.h.wood(a)alexandriasoftware.com 202.683.8604

5 10

Re: [Users] Managing Remote Access to Physical Workstations
by Sigbjorn Lie 02 Aug '12

02 Aug '12

Hi, Then you should still have a look at the Leostream Connection Broker. (www.leostream.com) One of the latest features we're integration with Red Hat Enterprise Virtualization / (ovirt). And they support both Windows and Linux. They support a wide variety of protocols and flexible configurations as well. Regards, Siggi On Thu, August 2, 2012 15:13, Randall Wood wrote: > Yes, I have a few of those available. They are nice (when the > bandwidth is there to support them). > > I'm looking for a single broker interface for both physical and > virtual machines that supports both Windows and Linux. > > On Thu, Aug 2, 2012 at 9:03 AM, Sigbjorn Lie <sigbjorn(a)nixtra.com> wrote: > >> Hi, >> >> >> Have you looked at Teradici PCoIP? They have a hardware solution based on a PCIe card in the >> host machine, and a PCoIP thin client. The performance is stunning. You don't even notice that >> you're connected to a thin client. I'm using this on a daily basis myself. >> >> To get a broker you can use Leostream's Connection Broker which supports Teradici PCoIP both >> for Windows and Linux. >> >> >> You will be needing the thin client when connecting. I don't think you can use a software >> client to connect to the physical machines. You can ask Leostream about this. >> >> See the following youtube video for more info: >> http://www.youtube.com/watch?v=NWjhAHDQZ7E >> >> >> This solution is for physical machines, not virtual machines. >> >> >> >> Regards, >> Siggi >> >> >> >> >> >> On Thu, August 2, 2012 14:44, Randall Wood wrote: >> >>> Sorry for the delay in responding. >>> >>> >>> >>> I have a set of users (about 50) who have Linux workstations at their >>> desks. These users have root access to these workstations, and these workstations are >>> frequently host VMs or are used for hardware driver development and support. These users have >>> access to a pool of managed Windows 7 VMs (for MS Office applications) in oVirt, so they are >>> already using the oVirt user portal. I would like to give these users remote access to their >>> workstations (from thin clients in conference rooms, from home, from corporate laptops on the >>> road, etc) using the same User Portal that they already use for the Windows VMs. >>> >>> VMware View and Citrix XenDesktop support providing users access to a >>> mixed set of managed-virtual-machine or unmanaged-physical-or-virtual-machine through a single >>> broker, but neither of them support access to Linux desktops. >>> >>> On Sat, Jul 21, 2012 at 2:33 AM, Johan Kragsterman >>> <johan.kragsterman(a)capvert.se> wrote: >>> >>> >>>> Hi, Randall! >>>> >>>> >>>> >>>> What you need is a "broker", and a terminal server is working as a "broker". There are >>>> several solutions that will work, but first I would want to know why you need physical >>>> machines? Are there demanding graphical applications you're going to run, or...? >>>> >>>> Rgrds Johan >>>> >>>> >>>> >>>> -----users-bounces(a)ovirt.org skrev: ----- >>>> Till: Itamar Heim <iheim(a)redhat.com> >>>> Från: Randall Wood >>>> Sänt av: users-bounces(a)ovirt.org >>>> Datum: 2012.07.20 22:37 >>>> Kopia: "users(a)ovirt.org" <users(a)ovirt.org> >>>> Ärende: Re: [Users] Managing Remote Access to Physical Workstations >>>> >>>> >>>> >>>> On Jul 20, 2012, at 16:30, Itamar Heim <iheim(a)redhat.com> wrote: >>>> >>>> >>>> >>>>> On 07/20/2012 11:13 PM, Randall Wood wrote: >>>>> >>>>> >>>>>> >>>>>>> No. oVirt's focus is virtual machines so the user portal only lets you open up >>>>>>> consoles on VMs managed by oVirt engine. >>>>>> >>>>>> I thought so. >>>>>> >>>>>> >>>>>> >>>>>>> When you say physical machines - would they be Linux or could they be Windows? >>>>>>> I might have an idea ...... >>>>>>> >>>>>>> >>>>>> >>>>>> The physical machines would all be RHEL, CentOS, or Fedora. >>>>>> >>>>>> >>>>> >>>>> which protocol would you expect users to use to gain access to this physical machines? >>>> >>>> I would prefer SPICE, but could use SPICE, VNC, or RDP. >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >>> >>> >>> -- >>> Randall Wood >>> Alexandria Software >>> http://www.alexandriasoftware.com >>> randall.h.wood(a)alexandriasoftware.com 202.683.8604 >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >> >> > > > > -- > Randall Wood > Alexandria Software > http://www.alexandriasoftware.com > randall.h.wood(a)alexandriasoftware.com 202.683.8604 > >

1 0

Re: [Users] Host installation failed with error "Unable to set host time"
by Nicholas Kesick 02 Aug '12

02 Aug '12

--_5d15bdc1-d905-4034-ad4c-39e3fe255785_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =0A= =0A= =0A= Daniel=2C It seems clear to me that for some reason Fedora 16 can't access the RTC (r= eal time clock - hardware clock) on your computer's motherboard. Odd that R= HEL 6.2 can but I forget what it is based on. Anyway can you try a Fedora 1= 7 live cd and see if the "hwclock --show" command works? If it doesn't=2C I= am thinking that you will want to file a bugzilla. If it does work=2C then= vdsm and ovirt-node-2.5.0 will work for you on Fedora 17. - Nick ---------------------------------------------------------------------------= ----------- From: DYeung(a)TrustedCS.com To: cybertimber2000(a)hotmail.com Subject: RE: [Users] Host installation failed with error "Unable to set hos= t time" Hi=2C Nicholas=2C=0A= I like to give you an update. I found that hwclock worked perfectly f= ine on RHEL 6.2 system. I am still=0A= puzzling why it failed in Fedora 16. I am thinking of installing oVirt 3.0= on RHEL 6.2 to see how it turns out. =0A= If you find anything=2C please let me know. =0A= Thanks a lot. =0A= =0A= Daniel =0A= =0A= =0A= =0A= From: DYeung(a)TrustedCS.com To: cybertimber2000(a)hotmail.com Subject: RE: [Users] Host installation failed with error "Unable to set hos= t time" Date: Wed=2C 1 Aug 2012 12:36:26 +0000 =0A= =0A= =0A= =0A= =0A= =0A= Here are the putput: =0A= =0A= #date =0A= Wed Aug 1 08:29:59 EDT 2012 =0A= =0A= # hwclock --show =0A= hwclock: Cannot access the Hardware Clock via any known method. =0A= hwclock: Use the --debug option to see the details of our search for an acc= ess method. =0A= =0A= # hwclock --debug =0A= hwclock from util-linux 2.20.1 =0A= hwclock: Open of /dev/rtc failed: Device or resource busy =0A= No usable clock interface found. =0A= hwclock: Cannot access the Hardware Clock via any known method. =0A= =0A= I am wondering if this is a bug in Fedora 16 or maybe I am missing the driv= er or related rpm.=0A= =0A= =0A= Let me know if you find anything. Thank you for your help.=20 =0A= =0A= DY =0A= =0A= =0A= =0A= =0A= From: Nicholas Kesick [cybertimber2000(a)hotmail.com] =0A= Sent: Tuesday=2C July 31=2C 2012 5:38 PM =0A= To: Daniel Yeung=3B oVirt Mailing List =0A= Subject: RE: [Users] Host installation failed with error "Unable to set hos= t time" =0A= =0A= =0A= =0A= =0A= =0A= =0A= From: DYeung(a)TrustedCS.com =0A= To: users(a)ovirt.org =0A= Date: Tue=2C 31 Jul 2012 20:12:31 +0000 =0A= Subject: [Users] Host installation failed with error "Unable to set host ti= me" =0A= =0A= =0A= =0A= =0A= I created a new host and the installation failed with the following message= s on the engine.log: =0A= =0A= <BSTRAP component=3D'SetSSHAccess' status=3D'OK' message=3D'SUCCESS'/> =0A= <BSTRAP component=3D'SET_SYSTEM_TIME' status=3D'FAIL' message=3D'Unable to = set host time.'/> =0A= <BSTRAP component=3D'RHEV_INSTALL' status=3D'FAIL'/> =0A= . Error occured. (Stage: Running first installation script on Host) =0A= 2012-07-31 15:28:06=2C530 INFO [org.ovirt.engine.core.utils.hostinstall.Mi= naInstallWrapper] (pool-5-thread-4) RunSSHCommand returns true =0A= 2012-07-31 15:28:06=2C530 INFO [org.ovirt.engine.core.bll.VdsInstaller] (p= ool-5-thread-4) RunScript ended:true =0A= 2012-07-31 15:28:06=2C530 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (p= ool-5-thread-4) Installation of 192.168.4.125. Operation failure. (Stage: R= unning first installation script on Host) =0A= 2012-07-31 15:28:06=2C531 INFO [org.ovirt.engine.core.bll.InstallVdsComman= d] (pool-5-thread-4) After Installation pool-5-thread-4 =0A= 2012-07-31 15:28:06=2C532 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStat= usVDSCommand] (pool-5-thread-4) START=2C SetVdsStatusVDSCommand(vdsId =3D 1= 001e89e-db3f-11e1-99f0-bbd8c818bb29=2C status=3DInstallFailed=2C nonOperati= onalReason=3DNONE)=2C log id: 3b08378 =0A= 2012-07-31 15:28:06=2C544 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStat= usVDSCommand] (pool-5-thread-4) FINISH=2C SetVdsStatusVDSCommand=2C log id:= 3b08378 =0A= =0A= =0A= Here are the vdsm related rpms in my Fedora 16 system. =0A= =0A= vdsm-4.9.3.3-0.fc16.x86_64 =0A= vdsm-bootstrap-4.9.3.3-0.fc16.noarch =0A= vdsm-cli-4.9.3.3-0.fc16.noarch =0A= =0A= Does anyone encounter the same problem? Any hints?=20 =0A= =0A= Thank you. =0A= =0A= DY =0A= =0A= _______________________________________________ Users mailing list Users@ov= irt.org=0A= http://lists.ovirt.org/mailman/listinfo/users=0A= =0A= I'll take a stab at it. =0A= Can you post the output of these two commands? Exclude the #=20 =0A= #date =0A= #hwclock --show =0A= =0A= =0A= =0A= =0A= =0A= = --_5d15bdc1-d905-4034-ad4c-39e3fe255785_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'><div id=3D"mps0_readMsgBodyConta= iner" class=3D"ReadMsgBody"><div class=3D"SandboxScopeClass ExternalClass" = id=3D"mps0_MsgContainer"><div>=0A= <div><span lang=3D"en-US">=0A= <div>=0A= <div style=3D""><span lang=3D"en-US">Daniel=2C<br><br>It seems clear to me = that for some reason Fedora 16 can't access the RTC (real time clock - hard= ware clock) on your computer's motherboard. Odd that RHEL 6.2 can but I for= get what it is based on. Anyway can you try a Fedora 17 live cd and see if = the "hwclock --show" command works? If it doesn't=2C I am thinking that you= will want to file a bugzilla. If it does work=2C then vdsm and ovirt-node-= 2.5.0 will work for you on Fedora 17.<br><br>- Nick<br><br></span><font sty= le=3D"font-size: 12pt=3B" face=3D"Times New Roman" size=3D"3"><span style= =3D"font-size:12pt"><font style=3D"font-size: 16pt=3B" face=3D"Arial" size= =3D"4"><span style=3D"font-size:14pt">-------------------------------------= -------------------------------------------------<br></span></font></span><= /font>From: DYeung(a)TrustedCS.com<br>To: cybertimber2000(a)hotmail.com<br>Subj= ect: RE: [Users] Host installation failed with error "Unable to set host ti= me"<br><br><font face=3D"Times New Roman" size=3D"3"><span style=3D"font-si= ze:12pt"><font face=3D"Arial" size=3D"4"><span style=3D"font-size:14pt">Hi= =2C Nicholas=2C</span></font></span></font></div>=0A= <div style=3D""><font face=3D"Times New Roman" size=3D"3"><span style=3D"fo= nt-size:12pt"><font face=3D"Arial" size=3D"4"><span style=3D"font-size:14pt= ">&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B I like to give you an update. I = found that hwclock worked perfectly fine on RHEL 6.2 system. I am still=0A= puzzling why it failed in Fedora 16. &nbsp=3BI am thinking of installing oV= irt 3.0 on RHEL 6.2 to see how it turns out. </span></font></span></font></= div>=0A= <div style=3D""><font face=3D"Times New Roman" size=3D"3"><span style=3D"fo= nt-size:12pt"><font face=3D"Arial" size=3D"4"><span style=3D"font-size:14pt= ">&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B If you find anything=2C please l= et me know. </span></font></span></font></div>=0A= <div style=3D""><font face=3D"Times New Roman" size=3D"3"><span style=3D"fo= nt-size:12pt"><font face=3D"Arial" size=3D"4"><span style=3D"font-size:14pt= ">&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B Thanks a lot. </span></font></sp= an></font></div>=0A= <div style=3D""><font face=3D"Times New Roman" size=3D"3"><span style=3D"fo= nt-size:12pt"><font face=3D"Arial" size=3D"4"><span style=3D"font-size:14pt= ">&nbsp=3B</span></font></span></font></div>=0A= <div style=3D""><font face=3D"Times New Roman" size=3D"3"><span style=3D"fo= nt-size:12pt"><font face=3D"Arial" size=3D"4"><span style=3D"font-size:14pt= ">Daniel </span></font></span></font></div>=0A= </div>=0A= </span></div>=0A= </div>=0A= </div></div><br><br><div><div id=3D"SkyDrivePlaceholder"></div><hr id=3D"st= opSpelling">From: DYeung(a)TrustedCS.com<br>To: cybertimber2000(a)hotmail.com<b= r>Subject: RE: [Users] Host installation failed with error "Unable to set h= ost time"<br>Date: Wed=2C 1 Aug 2012 12:36:26 +0000<br><br>=0A= =0A= =0A= <style></style><style id=3D"ecxowaParaStyle">=0A= </style>=0A= =0A= =0A= <div style=3D"direction:ltr=3Bfont-family:Tahoma=3Bcolor:#000000=3Bfont-siz= e:10pt">Here are the putput:<br>=0A= <br>=0A= #date<br>=0A= Wed Aug&nbsp=3B 1 08:29:59 EDT 2012<br>=0A= <br>=0A= # hwclock --show<br>=0A= hwclock: Cannot access the Hardware Clock via any known method.<br>=0A= hwclock: Use the --debug option to see the details of our search for an acc= ess method.<br>=0A= <br>=0A= # hwclock --debug<br>=0A= hwclock from util-linux 2.20.1<br>=0A= hwclock: Open of /dev/rtc failed: Device or resource busy<br>=0A= No usable clock interface found.<br>=0A= hwclock: Cannot access the Hardware Clock via any known method.<br>=0A= <br>=0A= I am wondering if this is a bug in Fedora 16 or maybe I am missing the driv= er or related rpm.=0A= <br>=0A= <br>=0A= Let me know if you find anything. Thank you for your help. <br>=0A= <br>=0A= DY<br>=0A= <br>=0A= <br>=0A= <div style=3D"font-family:Times New Roman=3Bcolor:#000000=3Bfont-size:16px"= >=0A= <hr tabindex=3D"-1">=0A= <div style=3D"direction:ltr" id=3D"ecxdivRpF58378"><font color=3D"#000000" = face=3D"Tahoma" size=3D"2"><b>From:</b> Nicholas Kesick [cybertimber2000@ho= tmail.com]<br>=0A= <b>Sent:</b> Tuesday=2C July 31=2C 2012 5:38 PM<br>=0A= <b>To:</b> Daniel Yeung=3B oVirt Mailing List<br>=0A= <b>Subject:</b> RE: [Users] Host installation failed with error "Unable to = set host time"<br>=0A= </font><br>=0A= </div>=0A= <div></div>=0A= <div>=0A= <div dir=3D"ltr">=0A= <hr id=3D"ecxstopSpelling">=0A= From: DYeung(a)TrustedCS.com<br>=0A= To: users(a)ovirt.org<br>=0A= Date: Tue=2C 31 Jul 2012 20:12:31 +0000<br>=0A= Subject: [Users] Host installation failed with error "Unable to set host ti= me"<br>=0A= <br>=0A= <style id=3D"ecxowaParaStyle">=0A= .ExternalClass p=0A= {margin-bottom:0=3B}=0A= =0A= .ExternalClass=0A= {direction:ltr=3Bfont-family:Tahoma=3Bcolor:#000000=3Bfont-size:10pt=3B}=0A= .ExternalClass P=0A= {margin-bottom:0=3B}=0A= .ExternalClass=0A= {scrollbar-base-color:undefined=3Bscrollbar-highlight-color:undefined=3Bscr= ollbar-darkshadow-color:undefined=3Bscrollbar-track-color:undefined=3Bscrol= lbar-arrow-color:undefined=3B}=0A= </style><br>=0A= <div>=0A= <div style=3D"color:rgb(0=2C0=2C0)=3Bfont-family:Tahoma=3Bfont-size:10pt=3B= direction:ltr">=0A= I created a new host and the installation failed with the following message= s on the engine.log:<br>=0A= <br>=0A= &lt=3BBSTRAP component=3D'SetSSHAccess' status=3D'OK' message=3D'SUCCESS'/&= gt=3B<br>=0A= &lt=3BBSTRAP component=3D'SET_SYSTEM_TIME' status=3D'FAIL' message=3D'Unabl= e to set host time.'/&gt=3B<br>=0A= &lt=3BBSTRAP component=3D'RHEV_INSTALL' status=3D'FAIL'/&gt=3B<br>=0A= . Error occured. (Stage: Running first installation script on Host)<br>=0A= 2012-07-31 15:28:06=2C530 INFO&nbsp=3B [org.ovirt.engine.core.utils.hostins= tall.MinaInstallWrapper] (pool-5-thread-4) RunSSHCommand returns true<br>= =0A= 2012-07-31 15:28:06=2C530 INFO&nbsp=3B [org.ovirt.engine.core.bll.VdsInstal= ler] (pool-5-thread-4)&nbsp=3B RunScript ended:true<br>=0A= 2012-07-31 15:28:06=2C530 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (p= ool-5-thread-4) Installation of 192.168.4.125. Operation failure. (Stage: R= unning first installation script on Host)<br>=0A= 2012-07-31 15:28:06=2C531 INFO&nbsp=3B [org.ovirt.engine.core.bll.InstallVd= sCommand] (pool-5-thread-4) After Installation pool-5-thread-4<br>=0A= 2012-07-31 15:28:06=2C532 INFO&nbsp=3B [org.ovirt.engine.core.vdsbroker.Set= VdsStatusVDSCommand] (pool-5-thread-4) START=2C SetVdsStatusVDSCommand(vdsI= d =3D 1001e89e-db3f-11e1-99f0-bbd8c818bb29=2C status=3DInstallFailed=2C non= OperationalReason=3DNONE)=2C log id: 3b08378<br>=0A= 2012-07-31 15:28:06=2C544 INFO&nbsp=3B [org.ovirt.engine.core.vdsbroker.Set= VdsStatusVDSCommand] (pool-5-thread-4) FINISH=2C SetVdsStatusVDSCommand=2C = log id: 3b08378<br>=0A= <br>=0A= <br>=0A= Here are the vdsm related rpms in my Fedora 16 system.<br>=0A= <br>=0A= vdsm-4.9.3.3-0.fc16.x86_64<br>=0A= vdsm-bootstrap-4.9.3.3-0.fc16.noarch<br>=0A= vdsm-cli-4.9.3.3-0.fc16.noarch<br>=0A= <br>=0A= Does anyone encounter the same problem?&nbsp=3B Any hints? <br>=0A= <br>=0A= Thank you.<br>=0A= <br>=0A= DY<br>=0A= <br>=0A= _______________________________________________ Users mailing list Users@ov= irt.org=0A= <a href=3D"http://lists.ovirt.org/mailman/listinfo/users" target=3D"_blank"= >http://lists.ovirt.org/mailman/listinfo/users</a></div>=0A= <div style=3D"color:rgb(0=2C0=2C0)=3Bfont-family:Tahoma=3Bfont-size:10pt=3B= direction:ltr">=0A= I'll take a stab at it.<br>=0A= Can you post the output of these two commands? Exclude the # <br>=0A= #date<br>=0A= #hwclock --show<br>=0A= </div>=0A= </div>=0A= </div>=0A= </div>=0A= </div>=0A= </div></div> </div></body> </html>= --_5d15bdc1-d905-4034-ad4c-39e3fe255785_--

1 0