- Users - oVirt List Archives

[Users] Passing a hint/message to a VM when it boots
by Kyrre Begnum 25 Mar '12

25 Mar '12

Hello, when creating a new VM from a template, i'd like to pass a hint of some sort ( perhaps a hostname ) to it so that the internal config managment system can do the rest of the setup. This should also be programmable via the REST API, as I want to use it for automated deployments. Has anyone had success doing this with Ovirt? i can only see two approaches: - Put the hint in a floppy / iso and mount it on the VM. - Hardcode a MAC address and let a DHCP server provide the hostname Both of these do not seem very optimal to me. I'd appreciate some thoughts from the community on how to proceed. Thanks in advance, k

2 3

[Users] Can i get more detail performance ?
by 肖力 25 Mar '12

25 Mar '12

------=_Part_303349_1291169119.1331881300797 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: base64 SSBjYW4gb25seSBzZWUgY3B1IGRpc2sgbmV0d29yayB1c2UgcmF0aW+jrEkgd2FudCBnZXQgbW9y ZSBkZXRhaWwgIHBlcmZvcm1hbmNlIGNvdW50ZXIsbGlrZSBiYW5kd2lkdGggZGVsYXllZKOsV2hl cmUgY2FuIGkgZmluZCA/IHRrcyEKCgp4aWFvbGkg ------=_Part_303349_1291169119.1331881300797 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: base64 PGRpdiBzdHlsZT0ibGluZS1oZWlnaHQ6MS43O2NvbG9yOiMwMDAwMDA7Zm9udC1zaXplOjE0cHg7 Zm9udC1mYW1pbHk6YXJpYWwiPkkgY2FuIG9ubHkgc2VlIGNwdSBkaXNrIG5ldHdvcmsmbmJzcDt1 c2UgcmF0aW+jrEkgd2FudCBnZXQgbW9yZSBkZXRhaWwgJm5ic3A7cGVyZm9ybWFuY2UmbmJzcDtj b3VudGVyLGxpa2UmbmJzcDtiYW5kd2lkdGgmbmJzcDtkZWxheWVko6xXaGVyZSBjYW4gaSBmaW5k ID8gdGtzITxkaXY+PGJyPjwvZGl2PjxkaXY+eGlhb2xpJm5ic3A7PC9kaXY+PC9kaXY+PGJyPjxi cj48c3BhbiB0aXRsZT0ibmV0ZWFzZWZvb3RlciI+PHNwYW4gaWQ9Im5ldGVhc2VfbWFpbF9mb290 ZXIiPjwvc3Bhbj48L3NwYW4+ ------=_Part_303349_1291169119.1331881300797--

2 1

[Users] CLI: can't attach storagedomain
by David Li 25 Mar '12

25 Mar '12

Hi, I have an iso domain created during engine setup. But I can't attach it to the datacenter in cli. oVirt shell (connected)]# create storagedomain --name "fc16-lid-engine_iso-domain" --datacenter-identifier "ac2690e4-72b2-11e1-882d-000c29bf47ca" unknown error: status: 400 reason: Bad Request detail: [Cannot attach Storage Domain.] Any ideas?

3 10

[Users] [Fwd: [node-devel] iptables configuration is bad with bonded network, fails to start Fedora 16]
by Mike Burns 24 Mar '12

24 Mar '12

1 1

Re: [Users] browser shows blank page for admin portal
by aru mon 23 Mar '12

23 Mar '12

Attached the server.log file. On Mon, Mar 19, 2012 at 8:36 PM, aru mon <arumon82(a)gmail.com> wrote: > I have a conclusion of why it is not working for me is because my jboss > applications are not deploying properly. > I just failed to fetch the error logs for now, but will post soon. > on the log i could see a info to create the ROOT.war.dodeploy and > engine.ear.dodeploy files. I created it manually and ROOT.war was able to > deploy successfully but engine.ear failed. Then i tried to connect through > the browser and it was connecting properly, but the /webadmin and non of > the other urls where working. So i think this is an issue with the failing > jboss apps only. Please suggest whether i need to do any kind of > configuration changes on the jboss config file? > > Regards, > Arumon > > On Mon, Mar 19, 2012 at 1:43 PM, aru mon <arumon82(a)gmail.com> wrote: > >> Yes. It is an rpm based setup. >> used the command engine-setup to configure the ovirt engine. >> >> Regards, >> Arumon >> >> On Mon, Mar 19, 2012 at 12:57 PM, Itamar Heim <iheim(a)redhat.com> wrote: >> >>> On 03/19/2012 09:07 AM, aru mon wrote: >>> >>>> I tried to access the url http://fqdn:8080 <http://fqdn:8080/> this >>>> gave >>>> me blank page. >>>> Then i tried https://fqdn:8443 <https://fqdn:8443/> , This gave me the >>>> >>>> ssl alert, after accepting the ssl alert it gave the blank page. >>>> I haven't tried the (/api). >>>> My server is only having 2GB ram. Does this make any difference? >>>> >>> >>> is this an rpm based deployment with ./ovirt-setup? >>> >>> Regards, >>>> Arumon >>>> >>>> On Mon, Mar 19, 2012 at 12:25 PM, Itamar Heim <iheim(a)redhat.com >>>> <mailto:iheim@redhat.com>> wrote: >>>> >>>> On 03/19/2012 08:30 AM, aru mon wrote: >>>> >>>> I am using the port #8080 and 8443 >>>> I think I have to update the browser. Please let me know if you >>>> have any >>>> more suggession. >>>> >>>> >>>> do you see the welcome page (/), or the api (/api)? >>>> >>>> Regards, >>>> Arumon >>>> On Mon, Mar 19, 2012 at 11:57 AM, Itamar Heim <iheim(a)redhat.com >>>> <mailto:iheim@redhat.com> >>>> <mailto:iheim@redhat.com <mailto:iheim@redhat.com>>> wrote: >>>> >>>> On 03/19/2012 08:13 AM, aru mon wrote: >>>> >>>> Hi Team, >>>> I was able to install ovirt-engine and spice-apxi on >>>> fc16. >>>> When i am trying to connect to the admin portal using the >>>> firefox 3.5 >>>> which is available on the fc by default, It is able to >>>> connect >>>> to portal >>>> but shows only blank page. >>>> Any idea on this issue? Please help. >>>> Regards, >>>> >>>> >>>> which port are you browsing? >>>> yum update on fedora should bring you to at least firefox 10? >>>> >>>> Arumon >>>> >>>> >>>> ______________________________**_____________________ >>>> Users mailing list >>>> Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>>> <mailto:Users@ovirt.org>> >>>> http://lists.ovirt.org/____**mailman/listinfo/users<http://lists.ovirt.org/____mailman/listinfo/users> >>>> <http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >>>> > >>>> <http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >>>> <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ______________________________**___________________ >>>> Users mailing list >>>> Users(a)ovirt.org <mailto:Users@ovirt.org> >>>> http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >>>> <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >>>> > >>>> >>>> >>>> >>>> >>>> >>>> ______________________________**_________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >>>> >>> >>> >> >

2 6

[Users] Problems removing a VM
by Andre Kostur 23 Mar '12

23 Mar '12

I'm having some problems trying to remove a VM. If I attempt to remove it, all the UI tells me is that it failed. No indications as to why it failed. However, if I dig into the logs on the server, it seems to be complaining that it cannot find the volume ("Failed to DeleteImageGroupVDS, error = Volume does not exist:"). If I attempt to just remove the disk from the VM, I get the same sort of response. The storage domain claims that it is active. What's next? (I only have 1 storage domain, 1 host, 1 cluster (OK, technically 2 if you count "default"), 1 datacenter) -- *Andre Kostur*

1 0

[Users] host registration fails
by aru mon 23 Mar '12

23 Mar '12

Hi Team, After instaling ovinrt-engine and the ovirt-node on seperate servers, when i am trying to add the node into engine the registration is failing. I donot have a DNS for name resolution. I can add the hostnames into the engine servers /etc/hosts file, but not sure how to do it on the node server. Please help. Regards, Arumon

2 1

[Users] Regarding ovirt node iso
by aru mon 23 Mar '12

23 Mar '12

Hi Team, I am trying to understand the difference of the different installation package available for ovirt node. 1. ovirt-node-image-2.2.3-1.1.fc16.iso 2. ovirt-node-image-latest.iso 3. ovirt-node-2.2.2.tar Please help me to understand the difference of the above three files. Regards, Arumon

2 2

[Users] Windows agent
by Michal Kopacki 23 Mar '12

23 Mar '12

Hi, Could someone point me to place where I will find ovirt agent files for windows ? -- Regards, Michal

3 3

[Users] Question on configuring local storage on oVirt Node
by Hans Lellelid 22 Mar '12

22 Mar '12

Hi folks - I hope this is the right place for this question; I have tried to Google this but in general haven't been able to find much in the way of docs outside of the main installation guide. In aforementioned guide there are instructions for configuring local-only storage on oVirt Node machines: "On a oVirt Node host, set up the path for the local storage as /data/images. This is the only path permitted for a oVirt Node. On a Red Hat Enterprise Linux host other paths are supported but the directories to support it must be manually created first." I'm probably missing something, but it's unclear to me how to create this local storage mountpoint on that host. (I don't see anything in the Node TUI.) I tried simply specifying "/data/images" in the hopes that it was automatically created, but the Admin console just spun indefinitely (eventually refreshing the page revealed that the store was note created). I'm currently rebuilding that Node as a F16+VDSM box instead -- so I can get in there and set this up manually (is there a way to get into schell on oVirt Nodes and mess with the [F16-based?] OS?) Any guidance greatly appreciated. Thanks, Hans

2 3