- Users - oVirt List Archives

Cluster Console Encryption
by Tommaso - Shellrent 08 Apr '20

08 Apr '20

Hi to all. We are tryng to manage the value of "Enable VNC Encryption" on the cluster via ansible[or any automatic mode]. Someone got any hint? Regards -- -- Shellrent - Il primo hosting italiano Security First *Tommaso De Marchi* /COO - Chief Operating Officer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155> | Fax 04441492177

1 0

Cannot upload image
by Green, Jacob Allen /C 07 Apr '20

07 Apr '20

Hello, I am in a precarious situation where I need to upload an image to the storage domain, I understand that normally you would achieve this via the upload button on the storage domain > Disks tab. However I currently do not have the ability to import the certificate. Is there a way from command line either on the RHV manager or otherwise to upload a qcow2 without using the image upload through the GUI? Thank you.

3 4

Gluster problems with new disk and device name change and overlap
by Gianluca Cecchi 07 Apr '20

07 Apr '20

Hi, I have configured a single host HCI environment through the GUI wizard in 4.3.9. Initial setup has thai layout of disks, as seen by the operating system: /dev/sda -> for ovirt-node-ng OS /dev/nvme0n1 --> for gluster, engine and data volumes /dev/nvme1n1 --> for gluster, vmstore volume So far so good and all is ok. I notice that, even with single path internal disks, at the end oVirt configures the gluster disks as multipath devices and LVM2 PV structure on top of the multipath devices. Is this for "code optimization" at low level or what is the rationale for that, as with Gluster normally you do use local disks and so single path? Multipath structure generated: [root@ovirt ~]# multipath -l nvme.8086-50484b53373530353031325233373541474e-494e54454c205353 dm-5 NVME,INTEL SSDPED1K375GA size=349G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 0:0:1:0 nvme0n1 259:0 active undef running eui.01000000010000005cd2e4b5e7db4d51 dm-6 NVME,INTEL SSDPEDKX040T7 size=932G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 2:0:1:0 nvme1n1 259:2 active undef running [root@ovirt ~]# Anyway, on top of the multipah devices On /dev/nvme0n1: gluster_vg_nvme0n1 volume group with gluster_lv_data and gluster_lv_engine On /dev/nvme1n1 gluster_vg_nvme1n1 volume group with gluster_lv_vmstore logical volume The problem arises when I add another nvme disk, that, occupying a PCI slot, it seems has always higher priority of the previous /dev/nvme1n1 disk and so takes its name. After booting the node: old nvme0n1 --> unmodified name old nvme1n1 --> becomes nvme2n1 new disk --> gets name nvme1n1 From a funcional point of view I have no problems apart LVM warnings I send below and also because the xfs entries in fstab are with UUID: UUID=fa5dd3cb-aeef-470e-b982-432ac896d87a /gluster_bricks/engine xfs inode64,noatime,nodiratime 0 0 UUID=43bed7de-66b1-491d-8055-5b4ef9b0482f /gluster_bricks/data xfs inode64,noatime,nodiratime 0 0 UUID=b81a491c-0a4c-4c11-89d8-9db7fe82888e /gluster_bricks/vmstore xfs inode64,noatime,nodiratime 0 0 lvs commands get: [root@ovirt ~]# lvs WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. LV VG Attr LSize Pool Origin ... Or, for the old nvme1n1 disk, now nvme2n1 multipath device: [root@ovirt ~]# pvdisplay /dev/mapper/eui.01000000010000005cd2e4e359284f51 WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. --- Physical volume --- PV Name /dev/mapper/eui.01000000010000005cd2e4e359284f51 VG Name gluster_vg_nvme1n1 PV Size 931.51 GiB / not usable 1.71 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 238467 Free PE 0 Allocated PE 238467 PV UUID O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl [root@ovirt ~]# I'm able to create PV on top of the new multipath device detected by the system (see the nvme1n1 of the underlying disk): eui.01000000010000005cd2e4b5e7db4d51 dm-6 NVME,INTEL SSDPEDKX040T7 size=3.6T features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 1:0:1:0 nvme1n1 259:1 active undef running [root@ovirt ~]# pvcreate --dataalignment 256K /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. Physical volume "/dev/mapper/eui.01000000010000005cd2e4b5e7db4d51" successfully created. [root@ovirt ~]# But then I'm unable to create a VG on top of it: [root@ovirt ~]# vgcreate gluster_vg_4t /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme1n1 for PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because device is used by LV. WARNING: PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9 prefers device /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 because device is in dm subsystem. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because device is used by LV. WARNING: Not using device /dev/nvme0n1 for PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp. WARNING: Not using device /dev/nvme1n1 for PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9. WARNING: Not using device /dev/nvme2n1 for PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl. WARNING: PV eYfuXw-yaPd-cMUE-0dnA-tVON-uZ9g-5x4BDp prefers device /dev/mapper/nvme.8086-50484b53373530353031325233373541474e-494e54454c20535344504544314b3337354741-00000001 because of previous preference. WARNING: PV 56ON99-hFFP-cGpZ-g4MX-GfjW-jXeE-fKZVG9 prefers device /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 because of previous preference. WARNING: PV O43LFq-46Gc-RRgS-Sk1F-5mFZ-Qw4n-oxXgJl prefers device /dev/mapper/eui.01000000010000005cd2e4e359284f51 because of previous preference. Cannot use device /dev/mapper/eui.01000000010000005cd2e4b5e7db4d51 with duplicates. [root@ovirt ~]# the same with the "-f" option. I suspect I can solve the problem filtering out /dev/nvme* devices in lvm.conf, but I'm not sure. The OS disk is seen as sda so it should not have problems with this Something like this: filter = [ "r|/dev/nvme|", "a|.*/|" ] And also I am not sure if I have to rebuild the initrd or not in this case and if so what would be the exact sequence of commands to execute. Any suggestions? Thanks in advance, Gianluca

2 2

Auto-logout while editing
by Shareef Jalloq 07 Apr '20

07 Apr '20

There's a rather annoying bug in the Engine UI where you can be logged out while actively using the system. I've been logged out twice now while editing the settings for a new VM. I'm screen grabbing and documenting as I go but I was just logged out while editing the System settings for a new VM. Shareef.

2 1

snapshot options on remote NFS storage
by Jayme 07 Apr '20

07 Apr '20

Was wondering if there are any guides or if anyone could share their storage configuration details for NFS. If using LVM is it safe to snapshot volumes with running VM images for backup purposes?

2 1

Re: Mount ISO to VM
by Shani Leviim 07 Apr '20

07 Apr '20

Hi Anton, Sure thing. During the creation of the NFS storage, you should specify an export path. SSHing that export path will expose you to the storage domain's content. You can visit the "Attaching NFS Storage" section in https://ovirt.org/documentation/admin-guide/chap-Storage.html *Regards,* *Shani Leviim* On Tue, Apr 7, 2020 at 1:37 PM Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > Hi Shani, > > > > Great, thank you very much. > > > > Do you perhaps know if I can access the storage domain if I SSH to a node? > For instance, if I want to access a “datastore” in VMware, I SSH to a host > and select /vmfs/volumes > > > > Is there anything like that available for oVirt? > > > > Thanks > > > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > [image: F] <https://www.facebook.com/voxtelecomZA> > [image: T] <https://www.twitter.com/voxtelecom> > [image: I] <https://www.instagram.com/voxtelecomza/> > [image: L] <https://www.linkedin.com/company/voxtelecom> > [image: Y] <https://www.youtube.com/user/VoxTelecom> > > *From:* Shani Leviim <sleviim(a)redhat.com> > *Sent:* 07 April 2020 11:35 > *To:* Anton Louw <Anton.Louw(a)voxtelecom.co.za> > *Cc:* users(a)ovirt.org > *Subject:* Re: [ovirt-users] Mount ISO to VM > > > > Hi Anton, > > You can upload an ISO file as a disk using the UI: > > Storage -> Disks -> upload. > > Further information can be found here under the "Uploading a Disk Image to > a Storage Domain" section: > > https://www.ovirt.org/documentation/admin-guide/chap-Virtual_Machine_Disks.… > > > > Or use the following script using SDK: > https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… > > > *Regards,* > > *Shani Leviim* > > > > > > On Tue, Apr 7, 2020 at 11:45 AM Anton Louw <Anton.Louw(a)voxtelecom.co.za> > wrote: > > > > Hi Everybody, > > > > Is there a way to mount an ISO to one of my VMs if I do not have an ISO > domain, but the ISO file is on a Data domain? > > > > Thanks > > > > *Anton Louw* > > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > > *Disclaimer* <https://www.facebook.com/voxtelecomZA> > > The contents of this email are confidential to the sender and the intended > recipient. Unless the contents are clearly and entirely of a personal > nature, they are subject to copyright in favour of the holding company of > the Vox group of companies. Any recipient who receives this email in error > should immediately report the error to the sender and permanently delete > this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as a > Service (SaaS) for business. Providing a *safer* and *more useful* place > for your human generated data. Specializing in; Security, archiving and > compliance. To find out more *Click Here*. > <https://www.facebook.com/voxtelecomZA> > > <https://www.facebook.com/voxtelecomZA> > > _______________________________________________ > Users mailing list -- *users(a)ovirt.org* > To unsubscribe send an email to *users-leave(a)ovirt.org* > Privacy Statement: *https://www.ovirt.org/privacy-policy.html* > oVirt Code of Conduct: > *https://www.ovirt.org/community/about/community-guidelines/* > List Archives: > *https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7ONE6IJN6RK2IQRNUYCZE3EOXBJWHX4/* > <https://www.facebook.com/voxtelecomZA> > > >

1 0

Re: Mount ISO to VM
by Shani Leviim 07 Apr '20

07 Apr '20

Hi Anton, You can upload an ISO file as a disk using the UI: Storage -> Disks -> upload. Further information can be found here under the "Uploading a Disk Image to a Storage Domain" section: https://www.ovirt.org/documentation/admin-guide/chap-Virtual_Machine_Disks.… Or use the following script using SDK: https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… *Regards,* *Shani Leviim* On Tue, Apr 7, 2020 at 11:45 AM Anton Louw <Anton.Louw(a)voxtelecom.co.za> wrote: > > > Hi Everybody, > > > > Is there a way to mount an ISO to one of my VMs if I do not have an ISO > domain, but the ISO file is on a Data domain? > > > > Thanks > > *Anton Louw* > *Cloud Engineer: Storage and Virtualization* at *Vox* > ------------------------------ > *T:* 087 805 0000 | *D:* 087 805 1572 > *M:* N/A > *E:* anton.louw(a)voxtelecom.co.za > *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg > www.vox.co.za > > [image: F] <https://www.facebook.com/voxtelecomZA> > [image: T] <https://www.twitter.com/voxtelecom> > [image: I] <https://www.instagram.com/voxtelecomza/> > [image: L] <https://www.linkedin.com/company/voxtelecom> > [image: Y] <https://www.youtube.com/user/VoxTelecom> > > [image: #VoxBrand] > <https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME> > *Disclaimer* > > The contents of this email are confidential to the sender and the intended > recipient. Unless the contents are clearly and entirely of a personal > nature, they are subject to copyright in favour of the holding company of > the Vox group of companies. Any recipient who receives this email in error > should immediately report the error to the sender and permanently delete > this email from all storage devices. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as a > Service (SaaS) for business. Providing a *safer* and *more useful* place > for your human generated data. Specializing in; Security, archiving and > compliance. To find out more Click Here > <https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>. > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7ONE6IJN6RK2… >

2 1

ISO and Export domains deprecated
by Colin Coe 07 Apr '20

07 Apr '20

Hi all I'm trying to understand how ISO and Export domains going away is going to affect us. We have four RHV instances: - Prod DC1 (RHV4.1) - Prod DC2 (RHV4.1) - DEV (RHV4.3) - TEST (RHV4.3) Prod DC1, DEV and TEST all share export and ISO domains. Prod DC2 is remote and currently has its own ISO and Export domains. When ISO and Export domains go away, can I still share ISO domains between the RHV instances? Thanks

5 9

Mount ISO to VM
by Anton Louw 07 Apr '20

07 Apr '20

Hi Everybody, Is there a way to mount an ISO to one of my VMs if I do not have an ISO domain, but the ISO file is on a Data domain? Thanks Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola 07 Apr '20

07 Apr '20

oVirt 4.4.0 Beta release refresh is now available for testing The oVirt Project is excited to announce the availability of the beta release of oVirt 4.4.0 refresh for testing, as of April 3rd, 2020 This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.3. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. In particular, please note that upgrades from 4.3 and future upgrades from this beta to the final 4.4 release from this version are not supported. Some of the features included in oVirt 4.4.0 Beta require content that will be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet due to some incompatibility in openvswitch package shipped in CentOS Virt SIG which requires to rebuild openvswitch on top of CentOS 8.2. Known Issues - ovirt-imageio development is still in progress. In this beta you can’t upload images to data domains using the engine web application. You can still copy iso images into the deprecated ISO domain for installing VMs or upload and download to/from data domains is fully functional via the REST API and SDK. For uploading and downloading via the SDK, please see: - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload_d… - https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/download… Both scripts are standalone command line tools, try --help for more info. Installation instructions For the engine: either use appliance or: - Install CentOS Linux 8 minimal from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - dnf module enable -y javapackages-tools pki-deps 389-ds - dnf install ovirt-engine - engine-setup For the nodes: Either use oVirt Node ISO or: - Install CentOS Linux 8 from http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-x8… ; select minimal installation - dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm - dnf update (reboot if needed) - Attach the host to engine and let it be deployed. What’s new in oVirt 4.4.0 Beta? - Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8), for both oVirt Node and standalone CentOS Linux hosts - Easier network management and configuration flexibility with NetworkManager - VMs based on a more modern Q35 chipset with legacy seabios and UEFI firmware - Support for direct passthrough of local host disks to VMs - Live migration improvements for High Performance guests. - New Windows Guest tools installer based on WiX framework now moved to VirtioWin project - Dropped support for cluster level prior to 4.2 - Dropped SDK3 support - 4K disks support only for file based storage. iSCSI/FC storage do not support 4k disks yet. - Exporting a VM to a data domain - Editing of floating disks - Integrating ansible-runner into engine, which allows a more detailed monitoring of playbooks executed from engine - Adding/reinstalling hosts are now completely based on Ansible - The OpenStack Neutron Agent cannot be configured by oVirt anymore, it should be configured by TripleO instead This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.1 * CentOS Linux (or similar) 8.1 * oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. If you manage more than one oVirt instance, OKD or RDO we also recommend to try ManageIQ <http://manageiq.org/>. In such a case, please be sure to take the qc2 image and not the ova image. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.0 release highlights: http://www.ovirt.org/release/4.4.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.0/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 5