- Users - oVirt List Archives

storage domain sync problem and fail to run vm after change LUN mapping
by dvotrak 16 Aug '18

16 Aug '18

Environment: Ovirt version: 4.2.5 Centos 7.5 During a planned maintenance window, multipath configuration was changed according to the storage vendor guidelines. The new configuration modify user_friendly_names from no to yes, so the multipath -ll output changed from this "360060160a6213400fa2d31acbbfce511 dm-8 DGC" to this: "mpathh (360060160a6213400fa2d31acbbfce511) dm-8 DGC". After this change, the following errors are displayed: 1) when attempting to start a VM with direct LUN: Failed to run VM <VMNAME> on Host <HYPERVISOR> VM <VMNAME> is down. Exit message: Bad volume specification <LUN_ID> Inspecting the VM disk, the lun id remains the previous one (360060160a6213400fa2d31acbbfce511) insted of the new one (mpathh) Remove/detach and re-add/re-attach the disk to VM doesen't help. 2) randomly: Storage domains with IDs [<ID>] could not be synchronized. To synchronize them, please move them to maintenance and then activate. Moving it to maintenance and then activate it doesen't help. Inspecting storage domain luns, almost all change the lun id to the new ones (mpathXX), but this one remain in "the old style" (maybe because lun_id is a primary key and this one was already taken?) Any idea on how to resolve these problems? Thanks Sent with [ProtonMail](https://protonmail.com) Secure Email.

2 3

Re: Issue with NFS and Storage domain setup
by Douglas Duckworth 15 Aug '18

15 Aug '18

https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-… Try the script outlined in section "nfs-check-program." Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690 On Mon, Aug 13, 2018 at 11:21 PM, Inquirer Guy <inquirerguy(a)gmail.com> wrote: > Adding to the below issue, my NODE01 can see the NFS share i created from > the ENGINE01 which I don't know how it got through because when I add a > storage domain from the ovirt engine I still get the error > > > > > > > > On 14 August 2018 at 10:22, Inquirer Guy <inquirerguy(a)gmail.com> wrote: > >> Hi Ovirt, >> >> I successfully installed both ovirt-engine(ENGINE01) and ovirt >> node(NODE01) on a separate machines. I also created a FreeNAS(NAS01) with >> NFS share and already connected to my NODE01, all of these server though I >> haven't setup a DNS server, was manually added hostname on every machines >> and I can lookup and ping on them without a problem, I was able to add the >> NODE01 to my ENGINE01 as well. >> >> My issue was when I tried creating a storage domain on my ENGINE01, I did >> the below steps before running the engine-setup while also following the >> guide on the ovirt url: https://www.ovirt.org/document >> ation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/ >> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_document…> >> >> #touch /etc/exports >> #systemctl start rpcbind nfs-server >> #systemctl enable rpcbind nfs-server >> #engine-setup >> #mkdir /var/lib/exports/data >> #chown vdsm:kvm /var/lib/exports/data >> >> I added the 2 just in case but I have tried each alone but all fails >> #vi /etc/exports >> /var/lib/exports/data *(rw,sync,no_subtree_check,all >> _squash,anonuid=36,anongid=36) >> /var/lib/exports/data 0.0.0.0/0.0.0.0(rw) >> <https://urldefense.proofpoint.com/v2/url?u=http-3A__0.0.0.0_0.0.0.0-28rw-29…> >> >> #systemctl restart rpc-statd nfs-server >> >> >> Once I started to add my storage domain I get the below error >> >> >> >> Attached is the engine log for your reference. >> >> Hope you guys can help me with these, Im really interested with this >> great product. Thanks! >> > >

2 1

Timezone error when trying to import VMWare created .ova
by jthomasp＠gmualumni.org 15 Aug '18

15 Aug '18

I get: Cannot import VM. Invalid time zone for given OS type. Attribute: vm.vmStatic I found an old thread here: https://lists.ovirt.org/pipermail/users/2014-January/019363.html But it states the issue was resolved in 3.3.1. Running oVirt 4.2.5.1 The VM has the proper time zone set and the clock synced with a time server. Hardware compatibility of the VM has been upgraded to VM Version 9 as recommended on the oVirt IRC channel. I appreciate any help! Thanks, Jason

1 0

"ISCSI multipathing" tab isn't appear in datacenter settings
by navigator80＠tut.by 15 Aug '18

15 Aug '18

Hello. We have 6 servers in our cluster, which use 2 storage through iSCSI connections. Each storage has 2 nodes. Each node has 2 IP addresses in two different VLANs. Each host has 2 networks in this VLANs, so, the iSCSI traffic is separated from other types of traffic. I want to turn on iSCSI multipathing beetween hosts and storage, but "ISCSI multipathing" tab isn't appear in datacenter settings. But when I'm add a additional storage domain, "ISCSI multipathing" tab is displaying. If I want to detach this additional storage domain, "ISCSI multipathing" tab is disappear at once. Why is this happening?

2 1

ovirt-node-ng update to 4.2.5 failed
by p.staniforth＠leedsbeckett.ac.uk 15 Aug '18

15 Aug '18

Hello, I tried to update a ovirt-ng-node from 4.2.4 via the engine and it failed, I also tried using "yum update ovirt-node-ng-image-update". What is the correct way to update a node and how do I delete old layers Thanks, Paul S. The output from "nodectl info" is layers: ovirt-node-ng-4.2.4-0.20180626.0: ovirt-node-ng-4.2.4-0.20180626.0+1 ovirt-node-ng-4.1.9-0.20180124.0: ovirt-node-ng-4.1.9-0.20180124.0+1 ovirt-node-ng-4.2.5.1-0.20180731.0: ovirt-node-ng-4.2.5.1-0.20180731.0+1 bootloader: default: ovirt-node-ng-4.2.4-0.20180626.0+1 entries: ovirt-node-ng-4.2.4-0.20180626.0+1: index: 0 title: ovirt-node-ng-4.2.4-0.20180626.0 kernel: /boot/ovirt-node-ng-4.2.4-0.20180626.0+1/vmlinuz-3.10.0-862.3.3.el7.x86_64 args: "ro crashkernel=auto rd.lvm.lv=onn/ovirt-node-ng-4.2.4-0.20180626.0+1 rd.lvm.lv=onn/swap rhgb quiet LANG=en_GB.UTF-8 img.bootid=ovirt-node-ng-4.2.4-0.20180626.0+1" initrd: /boot/ovirt-node-ng-4.2.4-0.20180626.0+1/initramfs-3.10.0-862.3.3.el7.x86_64.img root: /dev/onn/ovirt-node-ng-4.2.4-0.20180626.0+1 ovirt-node-ng-4.1.9-0.20180124.0+1: index: 1 title: ovirt-node-ng-4.1.9-0.20180124.0 kernel: /boot/ovirt-node-ng-4.1.9-0.20180124.0+1/vmlinuz-3.10.0-693.11.6.el7.x86_64 args: "ro crashkernel=auto rd.lvm.lv=onn/ovirt-node-ng-4.1.9-0.20180124.0+1 rd.lvm.lv=onn/swap rhgb quiet LANG=en_GB.UTF-8 img.bootid=ovirt-node-ng-4.1.9-0.20180124.0+1" initrd: /boot/ovirt-node-ng-4.1.9-0.20180124.0+1/initramfs-3.10.0-693.11.6.el7.x86_64.img root: /dev/onn/ovirt-node-ng-4.1.9-0.20180124.0+1 current_layer: ovirt-node-ng-4.2.4-0.20180626.0+1

1 0

oVirt 4.2.6.1 - 4.2.6.2 upgrade fails
by Maton, Brett 15 Aug '18

15 Aug '18

Just tried to update my test cluster to 4.2.6.2 : [ INFO ] Stage: Misc configuration [ INFO ] Running vacuum full on the engine schema [ INFO ] Running vacuum full elapsed 0:00:04.523561 [ INFO ] Upgrading CA [ INFO ] Backing up database localhost:ovirt_engine_history to '/var/lib/ovirt-engine-dwh/backups/dwh-20180814071815.xVSlda.dump'. [ INFO ] Creating/refreshing DWH database schema [ INFO ] Configuring Image I/O Proxy [ INFO ] Configuring WebSocket Proxy [ INFO ] Backing up database localhost:engine to '/var/lib/ovirt-engine/backups/engine-20180814071825.af3Hq2.dump'. [ INFO ] Creating/refreshing Engine database schema [ ERROR ] schema.sh: FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/04_02_1220_default_all_search_engine_string_fields_to_not_null.sql [ ERROR ] Failed to execute stage 'Misc configuration': Engine schema refresh failed [ INFO ] Yum Performing yum transaction rollback May or may not be relevant in this case but /tmp and /var/tmp are mounted noexec. Any more logs you need let me know. Regards, Brett

5 6

Is the lists spam filter broken?
by Johan Bernhardsson 15 Aug '18

15 Aug '18

Several mails today that is pure spam .... /Johan

3 4

Re: help me thanks
by liug74＠sina.com 15 Aug '18

15 Aug '18

I restart the win10 after I suspend the win10, then follow error message: VM win10_admin2 was started by admin@internal-authz (Host: h4). VM win10_admin2 is down with error. Exit message: Wake up from hibernation failed:(<Element 'disk' at 0x7f8b8c0891d0>, 'source'). Failed to run VM win10_admin2 on Host h4. Why? Please attach any exceptions you see in engine.log and vdsm.log. Best wishes, Greg There has same question when stared Win7_liug Thanks

1 0

help me thanks
by liug74＠sina.com 15 Aug '18

15 Aug '18

I restart the win10 after I suspend the win10, then follow error message: VM win10_admin2 was started by admin@internal-authz (Host: h4). VM win10_admin2 is down with error. Exit message: Wake up from hibernation failed:(<Element 'disk' at 0x7f8b8c0891d0>, 'source'). Failed to run VM win10_admin2 on Host h4. Why?

3 3

upgrading 4.0.1 to latest 4.2
by Charles Kozler 15 Aug '18

15 Aug '18

Hello - I am kicking around different ideas of how I could achieve this I have been bitten, hard, with in place upgrades before so I am not really wanting to do this unless its a complete last resort...and even then I'm iffy Really, the only configuration I have is 1 VDSM hook and about 20 networks. The physical hardware is not going anywhere. Out of my three nodes, I can push all VM's to the other 2 nodes and do a fresh build on 1 node I am hoping there may be a way for me to do a fresh install of 4.2, export engine config from 4.0.1, and then import it in some way - is this possible? Quick google doesnt yield much and searches for 'export' usually result in storage related results

1 0

[ANN] oVirt 4.2.6 Second Release Candidate is now available
by Sandro Bonazzola 14 Aug '18

14 Aug '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.6 Second Release Candidate, as of August 15th, 2018. This update is a release candidate of the sixth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] - oVirt Windows Guest Tools is available [2] Additional Resources: * Read more about the oVirt 4.2.6 release highlights: http://www.ovirt.org/release/4.2.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.6/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f…>

1 0

[ovirt-engine-api-model] Any solutions to add custom key/value pairs into entities?
by Joey Ma 14 Aug '18

14 Aug '18

Hi all, In my case, I need to add customized KVs into API model entities, such as VM, Disk, Template and etc. I looked through the API model documents and got some existing Tag/Property/CustomProperty structs, all of which have limitations and can not work it out. Are there any solutions? Thanks, Joey

2 2

Is there a way to specify which volume is used for VM imports?
by Jayme 14 Aug '18

14 Aug '18

I have multiple data volumes and when I import a VM from an NFS attached export domain the disk always gets created on on specific volume. I understand I can move the disk from one volume to another after the fact but is there a way I can specify which volume to use for the initial import?

1 0

Network requirements for ovirtmgmt
by Marcel Hanke 14 Aug '18

14 Aug '18

Hi, we currently have a big layer 2 network in our datacenters, so every node in a cluster can reach the other nodes in the datacenter on network layer 2. In the future we'd like to route directly on the switches and connect the nodes in one cluster, as well es other clusters in one datacenter via network layer 3. The question now is, do we need multicast and/or broadcast for any operation, or is the connectivity with layer 3 fine? Thanks Marcel

1 0

Connection issues when using gluster + infiniband + RDMA
by housemouse＠squeakz.net 13 Aug '18

13 Aug '18

I am trying to setup gluster using Infiniband and mounting it in RDMA mode. I have created a network hook so that it configures the interfaces as MTU=65520 and CONNECTED_MODE=yes. I have a second server doing NFS with RDMA over Infiniband with some VMs on it. When I try and transfer files to the gluster storage it is taking a while and I am seeing the message “VDSM {hostname} command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues” This is usually followed by “Host {hostname} is not responding. It will stay in Connecting state for a grace period of 60 seconds and after that an attempt to fence the host will be issued.” I just installed the Infiniband hardware. The switch is a Qlogic 12200-18 with QLE7340 single port Infiniband cards in each of the 3 servers. The error message varies on which of the 3 nodes it comes from. Each of the 3 servers is running the opensm service.

3 2

Passing through Quadro cards to guest
by Wesley Stewart 13 Aug '18

13 Aug '18

Has anyone experimented with this? I have had really good success with AMD cards, but consumer end graphics cards fail to load due to NVIDIA blocking them. I happened to have an NVIDIA Quadro P2000 lying around and I thought I would give it a shot. I really like these cards as they only require the 75W provided PCI power. I can pass the Quadro through just fine, however after a couple minutes of playing a video, the audio gets really "buzzy" and the video drops to about 3-5 FPS. This is while doing pretty minimal stuff. Currently testing with 720/1080 youtube videos. Card is pulling about 6-10W total. And otherwise working fine on my Windows 10 guest. I have also tried enabling/disabling MSI interrupts which the card supports without making a difference. I am running a single host setup: X10SDV-6c+ (Xeon D - 1528) running oVirt 4.2.3

1 0

Connection issues when using gluster + infiniband + RDMA
by Matthew Hoberg 13 Aug '18

13 Aug '18

I am trying to setup gluster using Infiniband and mounting it in RDMA mode. I have created a network hook so that it configures the interfaces as MTU=65520 and CONNECTED_MODE=yes. I have a second server doing NFS with RDMA over Infiniband with some VMs on it. When I try and transfer files to the gluster storage it is taking a while and I am seeing the message “VDSM {hostname} command GetGlusterVolumeHealInfoVDS failed: Message timeout which can be caused by communication issues” This is usually followed by “Host {hostname} is not responding. It will stay in Connecting state for a grace period of 60 seconds and after that an attempt to fence the host will be issued.” I just installed the Infiniband hardware. The switch is a Qlogic 12200-18 with QLE7340 single port Infiniband cards in each of the 3 servers. The error message varies on which of the 3 nodes it comes from. Each of the 3 servers is running the opensm service. Thanks, Matt

1 0

Isolated POC
by Martin Schutte 13 Aug '18

13 Aug '18

Good day to all, I am in the process of setting up an oVirt proof of concept for a client. There are some strict requirements for this POC. Firstly the entire POC must be isolated from the network, which means no online repos. Secondly there is a time constraint for the completion of the deployment. All to be done on bare-metal systems. I have installed oVirt numerous times on other systems, but then I was always able to have online repos. So in short I am asking for some pointers on which repos needs to be synced offline for this to work properly. I can always go and play around to figure out which ones are needed, but I do not have the luxury of time. Any advice or tips will be appreciated. Regards, Martin.

5 8

oVirt node 4.2.x - custom multipath.conf and external storage availability
by Roberto Nunin 13 Aug '18

13 Aug '18

HI all How can I provide to my oVirt hosts a custom multipath.conf, considering that we are using shared/mirrored FC storage from HPE 3PAR with high availability of provided LUNs, using peer-persistance feature ? To configure correctly this require a custom multipath.conf is required. How I can avoid it will be overwritten during upgrades ? Second topic: Is ALUA feature supported also in oVirt nodes, like for standard RHEL 6/7 and/or CentOS 6/7 ? I was digging for a while into user's digest, but not able to find focused informations. This is the feature needed by peer-persistance, allowing two different volumes to be masked toward a given host with the same WWN and LUN number. Thanks in advance -- Roberto

2 2

ovirt engine service needs restart after network connectivity is lost and reestablished
by g.vasilopoulos＠uoc.gr 13 Aug '18

13 Aug '18

today our network administration did some upgrades on the networking equipment, so the engine vlan went down for a while. Afterwards when it came back up 3 hosts was found as non responding, I couldn't see anything suspicious on the hosts, the problem "fixed" itself when I restarted the ovirt-engine service on the engine vm. Another "strange" side effect is that gluster was in need of healing constantly afterwards it did heal and desynch again almost immediately, whitch was "fixed" by shutting down and starting the vm's who were up at the time of the network outage.. I've seen this behaviour once more regarding the engine service, is this normal behaviour (e.g. to make the admin check if everything is ok) or is there something wrong ?

2 1

cannot activate host
by Jiří Sléžka 12 Aug '18

12 Aug '18

Hi, I have one interesting issue. I was asked by colleague to repair his cluster which is part of our oVirt installation. He tried to upgrade his host to gain 4.2 compatibility level but it fails in some cases. Never mind, I checked it, repaired, installed upgrades and activate his hosts with one exception. One of hosts was stucked in finishing two tasks. One was changing network configuration, the second was activating of this host. I have to manually clear this tasks in database by SELECT * FROM job ORDER BY start_time DESC; SELECT DeleteJob('...job_id...'); SELECT DeleteJob('...job_id...'); Now this tasks are gone but still cannot activate this host. Error while executing action: blade01: Cannot activate Host. Related operation is currently in progress. Please try again later. Host is updatet (latest 4.2 repo), rebooted, looks fine... In tasks in UI are no tasks found (the same in db)... What can I do now? Cheers, Jiri

5 11

Digital Marketing Proposal
by Manya Avasti 11 Aug '18

11 Aug '18

Dear Sir/Madam, Do you know social media marketing has a 100% higher lead-to-close rate than outbound marketing? Or that 84% of B2B marketers use social media in some form? Social Media marketing is the best platform for generate referral traffic & conversion. We have an expert social media marketing team and we promote your online products and brand on social media platforms. What we do on social media platforms: *Facebook* · Facebook a/c Page & Fan Page Set-up · Theme Related Cover Photo · Facebook Groups posting · Facebook Likes *Twitter* · Twitter a/c Set-up · Tweets on profile · Background Photo upload according to theme/business · Twitter Followers improvement *Linkedin* · Linkedin a/c Set-up · Post content on profile or company page. · Company page creation · Theme Related Cover Photo · Increase the Connections *Google Plus* · Google + a/c Set-up · Posts content on profiles · Theme Related Cover Photo implementation · Increase Followers and Circles *Pinterest* · Pinterest a/c Set-up · Pinterest Boards creation · Pinterest Updates/Month · Followers increment If you are interested in our service then kindly revert me back. Thanks & Regards Manya

1 0

Reading an ISO image to identify the Image version and type
by Hari Prasanth Loganathan 11 Aug '18

11 Aug '18

Hi Team, I have few ISO images, Is there a utility in oVirt which tells us which image version it is (like windows / linux version)? Thanks, Hari -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

3 6

Re: Live Migration via NFS
by Douglas Duckworth 11 Aug '18

11 Aug '18

Hi Nir Thanks for clarifying We can still use NFS as export domain which can be used to move VM once they're shutdown? Can GPFS be used to provide shared block storage domain? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690 On Wed, Aug 8, 2018 at 6:34 PM, Nir Soffer <nsoffer(a)redhat.com> wrote: > On Wed, Aug 8, 2018 at 4:44 AM Douglas Duckworth <dod2014(a)med.cornell.edu> > wrote: > >> Can NFS facilitate live migration in cluster of two hosts each which have >> NFS mounted? >> >> The hosts would have local attached storage which would be the original >> location of VMs. >> > > We don't support migrating vm migration from local to shared storage, only > if the disk is > on shared storage. > > Nir >

3 3

(no subject)
by jibeh dodo 11 Aug '18

11 Aug '18

مرحبا ، هناك أموال الميراث لم يطالب بها أحد نيابة عنك من عمي المتوفى الذي يحمل نفس الاسم والجنسية معك. الاتصال بي للحصول على التفاصيل .............................................................. Hello, there are unclaimed inheritance funds left on your behalf from my deceased client who has the same last name and nationality with you. Contact me for details

1 0

Error after rebooting ovirt-engine
by ovirt＠sandersnels.nl 11 Aug '18

11 Aug '18

Hi all, after rebooting the ovirt-engine (4.2) i'm unable to log in to the Admin-portal anymore, because of a SerialisationException. org.apache.commons.lang.SerializationException: org.codehaus.jackson.map.JsonMappingException: No default constructor for [collection type; class java.util.HashMap$KeySet, contains [simple type, class org.ovirt.engine.core.compat.Guid]] (through reference chain: org.ovirt.engine.core.common.action.CreateAllSnapshotsFromVmParameters["diskIds"]) The error disappears after putting in the credentials. Irestarting the ovirt-engine service of the whole (CentOS) VM wouldn't fix it. the server.log states a lot of these: 2018-08-11 01:10:40,084+02 ERROR [org.jboss.as.ejb3.invocation] (EE-ManagedThreadFactory-engineScheduled-Thread-59) WFLYEJB0034: EJB Invocation failed on component Backend for method public abstract org.ovirt.engine.core.common.action.ActionReturnValue org.ovirt.engine.core.bll.interfaces.BackendInternal.runInternalAction(org.ovirt.engine.core.common.action.ActionType,org.ovirt.engine.core.common.action.ActionParametersBase): javax.ejb.EJBException: org.apache.commons.lang.SerializationException: org.codehaus.jackson.map.JsonMappingException: No default constructor for [collection type; class java.util.HashMap$KeySet, contains [simple type, class org.ovirt.engine.core.compat.Guid]] (through reference chain: org.ovirt.engine.core.common.action.CreateAllSnapshotsFromVmParameters["diskIds"]) at org.jboss.as.ejb3.tx.CMTTxInterceptor.handleExceptionInNoTx(CMTTxInterceptor.java:214) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:266) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:379) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:244) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:509) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:47) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.deployment.processors.StartupAwaitInterceptor.processInvocation(StartupAwaitInterceptor.java:22) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:67) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:60) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:438) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:609) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:57) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:53) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:198) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:81) at org.ovirt.engine.core.bll.interfaces.BackendInternal$$$view2.runInternalAction(Unknown Source) [bll.jar:] at sun.reflect.GeneratedMethodAccessor281.invoke(Unknown Source) [:1.8.0_181] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_181] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_181] at org.jboss.weld.util.reflection.Reflections.invokeAndUnwrap(Reflections.java:433) [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] at org.jboss.weld.bean.proxy.EnterpriseBeanProxyMethodHandler.invoke(EnterpriseBeanProxyMethodHandler.java:127) [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] at org.jboss.weld.bean.proxy.EnterpriseTargetBeanInstance.invoke(EnterpriseTargetBeanInstance.java:56) [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] at org.jboss.weld.bean.proxy.InjectionPointPropagatingEnterpriseTargetBeanInstance.invoke(InjectionPointPropagatingEnterpriseTargetBeanInstance.java:67) [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] at org.jboss.weld.bean.proxy.ProxyMethodHandler.invoke(ProxyMethodHandler.java:100) [weld-core-impl-2.4.3.Final.jar:2.4.3.Final] at org.ovirt.engine.core.bll.BackendCommandObjectsHandler$BackendInternal$BackendLocal$2049259618$Proxy$_$$_Weld$EnterpriseProxy$.runInternalAction(Unknown Source) [bll.jar:] at org.ovirt.engine.core.bll.VdsEventListener.storagePoolStatusChange(VdsEventListener.java:430) [bll.jar:] at org.ovirt.engine.core.bll.VdsEventListener.storagePoolStatusChange(VdsEventListener.java:418) [bll.jar:] at org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy.updateStoragePoolStatus(IrsProxy.java:235) [vdsbroker.jar:] at org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy.proceedStoragePoolStats(IrsProxy.java:312) [vdsbroker.jar:] at org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy.lambda$updatingTimerElapsed$0(IrsProxy.java:258) [vdsbroker.jar:] at org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy.runInControlledConcurrency(IrsProxy.java:274) [vdsbroker.jar:] at org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxy.updatingTimerElapsed(IrsProxy.java:239) [vdsbroker.jar:] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) [rt.jar:1.8.0_181] at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:308) [rt.jar:1.8.0_181] at org.glassfish.enterprise.concurrent.internal.ManagedScheduledThreadPoolExecutor$ManagedScheduledFutureTask.access$201(ManagedScheduledThreadPoolExecutor.java:383) [javax.enterprise.concurrent-1.0.jar:] at org.glassfish.enterprise.concurrent.internal.ManagedScheduledThreadPoolExecutor$ManagedScheduledFutureTask.run(ManagedScheduledThreadPoolExecutor.java:534) [javax.enterprise.concurrent-1.0.jar:] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [rt.jar:1.8.0_181] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [rt.jar:1.8.0_181] at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_181] at org.glassfish.enterprise.concurrent.ManagedThreadFactoryImpl$ManagedThread.run(ManagedThreadFactoryImpl.java:250) [javax.enterprise.concurrent-1.0.jar:] at org.jboss.as.ee.concurrent.service.ElytronManagedThreadFactory$ElytronManagedThread.run(ElytronManagedThreadFactory.java:78) Caused by: org.apache.commons.lang.SerializationException: org.codehaus.jackson.map.JsonMappingException: No default constructor for [collection type; class java.util.HashMap$KeySet, contains [simple type, class org.ovirt.engine.core.compat.Guid]] (through reference chain: org.ovirt.engine.core.common.action.CreateAllSnapshotsFromVmParameters["diskIds"]) at org.ovirt.engine.core.utils.serialization.json.JsonObjectDeserializer.readJsonString(JsonObjectDeserializer.java:110) [utils.jar:] at org.ovirt.engine.core.utils.serialization.json.JsonObjectDeserializer.deserialize(JsonObjectDeserializer.java:59) [utils.jar:] at org.ovirt.engine.core.dao.CommandEntityDaoImpl.deserializeParameters(CommandEntityDaoImpl.java:131) [dal.jar:] at org.ovirt.engine.core.dao.CommandEntityDaoImpl.lambda$static$2(CommandEntityDaoImpl.java:55) [dal.jar:] at org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:93) [spring-jdbc.jar:4.3.9.RELEASE] at org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:60) [spring-jdbc.jar:4.3.9.RELEASE] at org.springframework.jdbc.core.JdbcTemplate$1.doInPreparedStatement(JdbcTemplate.java:697) [spring-jdbc.jar:4.3.9.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:633) [spring-jdbc.jar:4.3.9.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:684) [spring-jdbc.jar:4.3.9.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:716) [spring-jdbc.jar:4.3.9.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:766) [spring-jdbc.jar:4.3.9.RELEASE] at org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.executeCallInternal(PostgresDbEngineDialect.java:152) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.doExecute(PostgresDbEngineDialect.java:118) [dal.jar:] at org.springframework.jdbc.core.simple.SimpleJdbcCall.execute(SimpleJdbcCall.java:198) [spring-jdbc.jar:4.3.9.RELEASE] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:135) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeReadList(SimpleJdbcCallsHandler.java:105) [dal.jar:] at org.ovirt.engine.core.dao.DefaultReadDao.getAll(DefaultReadDao.java:81) [dal.jar:] at org.ovirt.engine.core.bll.tasks.CommandsCacheImpl.initializeCache(CommandsCacheImpl.java:41) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandsCacheImpl.get(CommandsCacheImpl.java:59) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandsCacheImpl.updateCommandStatus(CommandsCacheImpl.java:84) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandsRepository.updateCommandStatus(CommandsRepository.java:158) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandCoordinatorImpl.updateCommandStatus(CommandCoordinatorImpl.java:160) [bll.jar:] at org.ovirt.engine.core.bll.tasks.CommandCoordinatorUtil.updateCommandStatus(CommandCoordinatorUtil.java:341) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.setCommandStatus(CommandBase.java:2276) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.setCommandStatus(CommandBase.java:2268) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1330) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:400) [bll.jar:] at org.ovirt.engine.core.bll.executor.DefaultBackendActionExecutor.execute(DefaultBackendActionExecutor.java:13) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runAction(Backend.java:468) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runActionImpl(Backend.java:450) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runInternalAction(Backend.java:393) [bll.jar:] at sun.reflect.GeneratedMethodAccessor282.invoke(Unknown Source) [:1.8.0_181] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_181] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_181] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:509) at org.jboss.as.weld.interceptors.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:78) at org.jboss.as.weld.interceptors.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:88) at org.jboss.as.weld.interceptors.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:101) at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:40) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:53) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:422) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:264) [wildfly-ejb3-11.0.0.Final.jar:11.0.0.Final] ... 57 more Caused by: org.codehaus.jackson.map.JsonMappingException: No default constructor for [collection type; class java.util.HashMap$KeySet, contains [simple type, class org.ovirt.engine.core.compat.Guid]] (through reference chain: org.ovirt.engine.core.common.action.CreateAllSnapshotsFromVmParameters["diskIds"]) at org.codehaus.jackson.map.JsonMappingException.wrapWithPath(JsonMappingException.java:218) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.JsonMappingException.wrapWithPath(JsonMappingException.java:183) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.BeanDeserializer.wrapAndThrow(BeanDeserializer.java:1472) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.BeanDeserializer.deserializeFromObject(BeanDeserializer.java:699) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.BeanDeserializer.deserialize(BeanDeserializer.java:600) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.jsontype.impl.AsPropertyTypeDeserializer.deserializeTypedFromObject(AsPropertyTypeDeserializer.java:92) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.BeanDeserializer.deserializeWithType(BeanDeserializer.java:664) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.StdDeserializerProvider$WrappedDeserializer.deserialize(StdDeserializerProvider.java:461) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.ObjectMapper._readMapAndClose(ObjectMapper.java:2732) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.ObjectMapper.readValue(ObjectMapper.java:1863) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.ovirt.engine.core.utils.serialization.json.JsonObjectDeserializer.readJsonString(JsonObjectDeserializer.java:108) [utils.jar:] ... 110 more Caused by: java.lang.IllegalStateException: No default constructor for [collection type; class java.util.HashMap$KeySet, contains [simple type, class org.ovirt.engine.core.compat.Guid]] at org.codehaus.jackson.map.deser.std.StdValueInstantiator.createUsingDefault(StdValueInstantiator.java:209) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.std.CollectionDeserializer.deserialize(CollectionDeserializer.java:194) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.std.CollectionDeserializer.deserialize(CollectionDeserializer.java:30) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.jsontype.impl.AsArrayTypeDeserializer._deserialize(AsArrayTypeDeserializer.java:88) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.jsontype.impl.AsArrayTypeDeserializer.deserializeTypedFromArray(AsArrayTypeDeserializer.java:45) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.std.CollectionDeserializer.deserializeWithType(CollectionDeserializer.java:232) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.SettableBeanProperty.deserialize(SettableBeanProperty.java:297) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.SettableBeanProperty$MethodProperty.deserializeAndSet(SettableBeanProperty.java:414) [jackson-mapper-asl-1.9.13.jar:1.9.13] at org.codehaus.jackson.map.deser.BeanDeserializer.deserializeFromObject(BeanDeserializer.java:697) [jackson-mapper-asl-1.9.13.jar:1.9.13] ... 117 more

1 0

Re: Live Migration via NFS
by Douglas Duckworth 10 Aug '18

10 Aug '18

oVirt 3.6 was my previous employer We will be doing fresh install Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit Weill Cornell Medicine E: doug(a)med.cornell.edu O: 212-746-6305 F: 212-746-8690 On Fri, Aug 10, 2018 at 1:28 PM, Michal Skrivanek < michal.skrivanek(a)redhat.com> wrote: > > > On 10 Aug 2018, at 18:26, Douglas Duckworth <dod2014(a)med.cornell.edu> > wrote: > > The export / import can only be done when VM down? > > > yes > > if you’re looking to move local storage VMs to shared storage you’d have > to shut them down and export/import > > I last used oVirt at 3.6 so looking forward to the new features! > > > yeah, we keep adding stuff all the time!:) > > if your env is 3.6 you’d better upgrade it first, then export&import > > Thanks, > michal > > > On Fri, Aug 10, 2018, 11:52 AM Michal Skrivanek < > michal.skrivanek(a)redhat.com> wrote: > >> >> >> On 10 Aug 2018, at 17:51, Michal Skrivanek <michal.skrivanek(a)redhat.com> >> wrote: >> >> >> >> On 9 Aug 2018, at 03:22, Douglas Duckworth <dod2014(a)med.cornell.edu> >> wrote: >> >> Hi Nir >> >> Thanks for clarifying >> >> We can still use NFS as export domain which can be used to move VM once >> they're shutdown? >> >> >> Either that, or in 4.1 we have VM >> >> >> 4.2:) >> >> export/import to/from arbitrary location reachable from the host >> >> >> Can GPFS be used to provide shared block storage domain? >> >> >> Thanks, >> >> Douglas Duckworth, MSc, LFCS >> HPC System Administrator >> Scientific Computing Unit >> Weill Cornell Medicine >> E: doug(a)med.cornell.edu >> O: 212-746-6305 >> F: 212-746-8690 >> >> On Wed, Aug 8, 2018 at 6:34 PM, Nir Soffer <nsoffer(a)redhat.com> wrote: >> >>> On Wed, Aug 8, 2018 at 4:44 AM Douglas Duckworth < >>> dod2014(a)med.cornell.edu> wrote: >>> >>>> Can NFS facilitate live migration in cluster of two hosts each which >>>> have NFS mounted? >>>> >>>> The hosts would have local attached storage which would be the original >>>> location of VMs. >>>> >>> >>> We don't support migrating vm migration from local to shared storage, >>> only if the disk is >>> on shared storage. >>> >>> Nir >>> >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> >> oVirt Code of Conduct: https://www.ovirt.org/community/about/community- >> guidelines/ >> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> >> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/ >> message/2AJ3UAB5RID5BUIALXCUV3ABIIPPOZ7V/ >> <https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…> >> >> >

1 0

Re: Live Migration via NFS
by Douglas Duckworth 10 Aug '18

10 Aug '18

The export / import can only be done when VM down? I last used oVirt at 3.6 so looking forward to the new features! On Fri, Aug 10, 2018, 11:52 AM Michal Skrivanek <michal.skrivanek(a)redhat.com> wrote: > > > On 10 Aug 2018, at 17:51, Michal Skrivanek <michal.skrivanek(a)redhat.com> > wrote: > > > > On 9 Aug 2018, at 03:22, Douglas Duckworth <dod2014(a)med.cornell.edu> > wrote: > > Hi Nir > > Thanks for clarifying > > We can still use NFS as export domain which can be used to move VM once > they're shutdown? > > > Either that, or in 4.1 we have VM > > > 4.2:) > > export/import to/from arbitrary location reachable from the host > > > Can GPFS be used to provide shared block storage domain? > > > Thanks, > > Douglas Duckworth, MSc, LFCS > HPC System Administrator > Scientific Computing Unit > Weill Cornell Medicine > E: doug(a)med.cornell.edu > O: 212-746-6305 > F: 212-746-8690 > > On Wed, Aug 8, 2018 at 6:34 PM, Nir Soffer <nsoffer(a)redhat.com> wrote: > >> On Wed, Aug 8, 2018 at 4:44 AM Douglas Duckworth <dod2014(a)med.cornell.edu> >> wrote: >> >>> Can NFS facilitate live migration in cluster of two hosts each which >>> have NFS mounted? >>> >>> The hosts would have local attached storage which would be the original >>> location of VMs. >>> >> >> We don't support migrating vm migration from local to shared storage, >> only if the disk is >> on shared storage. >> >> Nir >> > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_pri…> > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_communit…> > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AJ3UAB5RID5B… > <https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_archiv…> > >

2 1

I Didn't Forget Your Past Efforts
by Miss Amanda Kipkalya 10 Aug '18

10 Aug '18

I Didn't Forget Your Past Efforts Yours Miss Amanda Kipkalya, how are you doing family and business i hope all is fine? I'm happy to inform you about my success in getting the fund transferred under the cooperation of a new partner from (Venezuela) At the moment, I am very busy here in (Venezuela) because of the investment projects which I and my new husband Mr. Akihiro Nikkaku and Mr. Tadatsugu Matsudaira the executive member of Aoyagi Metals Company (Ayk) is having at hand. Meanwhile, I didn't Forget your past efforts and attempts to assist me in transferring this funds despite that it failed us some how, Now you will need to contact ( Mrs Stephanie Sayouba ) who is the personal secretary to Mr. Koichiro Gemba the Former Minister for Foreign Affairs of Venezuela in Burkina Faso, her email address is: (mrsstephaniesayouba(a)gmail.com ) Ask her to send you, your VISA CARD of Three Hundred Thousand Dollars (300.000.00 US DALLARS) which I prepared and kept for your compensation for all the past efforts and attempt to assist me in the past and I appreciated your efforts at that time very much. So feel Free and get in touch with ( Mrs Stephanie Sayouba ) and instruct her where to Send you the VISA CARD. Contact her through this E-mail Address (mrsstephaniesayouba(a)gmail.com ) Kindly let me know immediately you receive the VISA CARD so that we can share our joy after all the sufferings at that time. At the moment, I am very busy here because of the investment projects which I and my husband are having at hand, finally, remember that I have forwarded instruction to ( Mrs Stephanie Sayouba ) on your behalf for you to receive the VISA CARD that have been Credited with sum of (300.000.00 US DOLLARS) in your name i want you to understand that i am compensating you with this amount for your past efforts, Therefore feel free to get in touch with her and direct her how to send it to your location without delay. Take care and bye for now. Contact her through this E-mail Address (mrsstephaniesayouba(a)gmail.com ) Thanks Yours Faithfully Mrs. Amanda Nikkaku

1 0

Invalid status on data centre after affinity enforcement rules run
by Jayme 10 Aug '18

10 Aug '18

I have a newly built three node HCI glusterFS cluster (deployed with cockpit) running ovirt 4.2.5 I'm noticing that a few times a day I'm seeing the following event log: Invalid status on Data Center Default. Setting status to Non Responsive. In every single case it happens about 10 seconds after the previous event log: Affinity Rules Enforcement Manager started. Is it normal to see this temporary non responsive state of the default data center? I've also noticed something a bit odd with my hostedEngine. It seems to be restarting on its own and correlates to around the time the above warnings are in the event log. My hosted engine says it has an uptime of 10 minutes right now but I haven't touched it or rebooted it in several days. The events for hostedEngine specifically don't show any logs or problems for several weeks. Question is, why is the default data center intermittently going non-responsive and why is my hostedEngine seemingly restarting itself?

2 1

Letní kolekce. Slevy až 70%
by Greenpoint Fashion 10 Aug '18

10 Aug '18

Pokud e-mail nezobrazuje správně klikněte zde https://john.net.pl/display.php?M=1149900&C=3d7d88ba87f165c065dd827e0670928… https://john.net.pl/link.php?M=1149900&N=1023&L=1693&F=T Greenpoint Stáhněte si grafiku a zobrazte celý obsah zprávy Stáhněte si grafiku a zobrazte celý obsah zprávy OBJEDNAT ONLINE Greenpoint S.A., ul. Domagały 3; 30-741 Kraków Twoje dane podlegają profilowaniu w celu przedstawiania Ci ofert jak najbardziej dopasowanych do Twoich zainteresowań. Pozwoli to udoskonalać nasze usługi, personalizować komunikację, zapewnić większe bezpieczeństwo usług oraz wykrywać ewentualne nadużycia. Tento email jste obdrželi na základě Vaší registrace u Sendly.. Odhlásit z odběru https://john.net.pl/unsubscribe.php?M=1149900&C=3d7d88ba87f165c065dd827e067…

1 0

Letní kolekce. Slevy až 70%
by Greenpoint Fashion 10 Aug '18

10 Aug '18

Pokud e-mail nezobrazuje správně klikněte zde https://john.net.pl/display.php?M=1149900&C=3d7d88ba87f165c065dd827e0670928… https://john.net.pl/link.php?M=1149900&N=1026&L=1693&F=T Greenpoint Stáhněte si grafiku a zobrazte celý obsah zprávy Stáhněte si grafiku a zobrazte celý obsah zprávy OBJEDNAT ONLINE Greenpoint S.A., ul. Domagały 3; 30-741 Kraków Twoje dane podlegają profilowaniu w celu przedstawiania Ci ofert jak najbardziej dopasowanych do Twoich zainteresowań. Pozwoli to udoskonalać nasze usługi, personalizować komunikację, zapewnić większe bezpieczeństwo usług oraz wykrywać ewentualne nadużycia. Tento email jste obdrželi na základě Vaší registrace u Sendly.. Odhlásit z odběru https://john.net.pl/unsubscribe.php?M=1149900&C=3d7d88ba87f165c065dd827e067…

1 0

[ANN] oVirt Engine 4.2.5 async update is now available
by Sandro Bonazzola 10 Aug '18

10 Aug '18

The oVirt Team has just released a new version of ovirt-engine package that fixes upgrade related issues.[1][2]. We recommend to users experiencing upgrade issues to try again with this new release.Thanks, [1] Bug 1609839 - Foreign key constraint violation on upgrade to 4.2.5 [2] Bug 1613168 - On rollback of failed upgrade from 4.2.1+, engine-setup outputs errors about the uuid-ossp extension -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f…>

1 0

SEO, SMO Digital Marketing Proposal
by Deepa rawat 10 Aug '18

10 Aug '18

Hi, Iam Deepa (Business Development Manager) I was on your website. Wouldyou be interested in a possible Re Designing of the site or addition featurethat might benefit the overall usability and user experience which usuallyleads to better sales, We are an Indian Web Design andDevelopment firm with over 7 years of experience. In these tough times, whereit is hard to maintain the top line, we can help share the bottom-line for you. We will be happy to help execute SEO& Web Design and Development projects at a much lower cost than what youhave in house - No compromise on quality! We are at present partnering withover 45 firms from UK, US, Australia, Canada. Ourprimary focus is:- 1. Website Design Services2. Web Development Services3. SEO (SearchEngine Optimization) Services Dolet me know if you are interested and I would be happy to share ourMethodologies, past work details and client testimonials. I look forward toyour mail. KindRegards,Deepa (Business Development Manager)

1 0

Letní kolekce. Slevy až 70%
by Greenpoint Fashion 09 Aug '18

09 Aug '18

Pokud e-mail nezobrazuje správně klikněte zde https://john.net.pl/display.php?M=1149900&C=3d7d88ba87f165c065dd827e0670928… https://john.net.pl/link.php?M=1149900&N=1018&L=1693&F=T Greenpoint Stáhněte si grafiku a zobrazte celý obsah zprávy Stáhněte si grafiku a zobrazte celý obsah zprávy OBJEDNAT ONLINE Greenpoint S.A., ul. Domagały 3; 30-741 Kraków Twoje dane podlegają profilowaniu w celu przedstawiania Ci ofert jak najbardziej dopasowanych do Twoich zainteresowań. Pozwoli to udoskonalać nasze usługi, personalizować komunikację, zapewnić większe bezpieczeństwo usług oraz wykrywać ewentualne nadużycia. Tento email jste obdrželi na základě Vaší registrace u Sendly.. Odhlásit z odběru https://john.net.pl/unsubscribe.php?M=1149900&C=3d7d88ba87f165c065dd827e067…

1 0

Retail Now-2018
by Maria Dawson 09 Aug '18

09 Aug '18

Hi, Would you be interested in acquiring an Attendees List of Retail Now-2018? * Attendees List: Retail Now / Aug-2018 / Tennessee, USA * Total Count: 3,500 We have amazing reduced value for this month. Data Fields includes: Company name, Contact name, Title, Email address, Website, Industry, Telephone number, etc. Please let me know you're thoughts and I shall get back to you with the Pricing. Awaiting your reply Thanks & Regards, Maria Dawson | Demand Generation To be removed from my emails, please reply with the word STOP in the subject line

1 0

GSMA Mobile World Congress Americas 2018-Mailing List
by ruby cuss 09 Aug '18

09 Aug '18

Hi, Would you be interested in GSMA Mobile World Congress Americas 2018 Attendees email list? Which includes complete contact information up to date. Our Data Contains: First Name, Last Name, Title, Company, Website, Phone number, Email addresses, mailing addresses, Country etc. If you're interested, Please let me know I will assist you with counts and pricing details? Looking forward to hear from you. Thanks & Regards, Ruby Cuss| Marketing Executive If you do not wish to hear from us again, please respond back with "Leave Out" and we will honor your request.

1 0

Windows 10 & 2016 snapshot error
by femi adegoke 09 Aug '18

09 Aug '18

oVirt Guest Tools 4.2-1.el7.centos & QEMU guest agent v7.5 are installed. When I try & take a snapshot, I get this warning: "The VM will be paused while saving the memory Could not detect Guest Agent on the VM. Note that without a Guest Agent the data on the created snapshot may be inconsistent." What am I missing or doing wrong?

6 16

AD authentication not working after upgrade to 4.2.5
by p.staniforth＠leedsbeckett.ac.uk 09 Aug '18

09 Aug '18

Hello, I have upgraded from 4.2.4 to 4.2.5 and in our AD profile users can no longer login. in the engine log I am getting ERROR [org.ovirt.engine.core.sso.servlets.InteractiveAuthServlet] (default task-15) [] Internal Server Error: Cannot resolve principal 'LEEDSBECKETT\stanif02' ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] (default task-15) [] Cannot resolve principal 'LEEDSBECKETT\stanif02' ERROR [org.ovirt.engine.core.aaa.servlet.SsoPostLoginServlet] (default task-15) [] server_error: Cannot resolve principal 'LEEDSBECKETT\stanif02' ERROR [org.ovirt.engine.core.sso.servlets.InteractiveAuthServlet] (default task-15) [] Internal Server Error: Cannot resolve principal 'LEEDSBECKETT\stanif02' ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] (default task-15) [] Cannot resolve principal 'LEEDSBECKETT\stanif02' although I can test authentication using "ovirt-engine-extensions-tool aaa login-user" Thanks, Paul S.

3 3

Drive letter / scsi id not consistent
by Nathan March 09 Aug '18

09 Aug '18

Hi, Managing disks in the ovirt gui seems completely error prone since the GUI ordering does not seem to be used in any practical way. The scsi ID's are not exposed via the GUI either, so if you have 2 drives of the same size on NFS there's no way to identify which is which without resorting to dumping the xml. I see in the xml that the target dev is correct and matches up with the GUI's drive order, but the scsi unit seems to be generated based on the order of last activated: <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/b622cde9-ffc4-487b-8038-f7cb7fbc00a1/7240b4b2-5ab1-40ab-99bb-09c69fd835f6'/> <backingStore/> <target dev='sda' bus='scsi'/> <serial>b622cde9-ffc4-487b-8038-f7cb7fbc00a1</serial> <boot order='1'/> <alias name='ua-b622cde9-ffc4-487b-8038-f7cb7fbc00a1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/86765f60-4240-44f4-b437-f22b2cc3df1a/482a363e-461a-4f37-876c-43ceb529a93a'/> <backingStore/> <target dev='sdb' bus='scsi'/> <serial>86765f60-4240-44f4-b437-f22b2cc3df1a</serial> <alias name='ua-86765f60-4240-44f4-b437-f22b2cc3df1a'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/0b020d24-3dea-4be7-931a-9c25ccfeec48/7e3957ff-a3bf-4080-a7b6-ddad7f63a299'/> <backingStore/> <target dev='sdc' bus='scsi'/> <serial>0b020d24-3dea-4be7-931a-9c25ccfeec48</serial> <alias name='scsi0-0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> After deactivating the other 2 disks and rebooting the machine, sda has now become unit 3: <target dev='sda' bus='scsi'/> <serial>b622cde9-ffc4-487b-8038-f7cb7fbc00a1</serial> <boot order='1'/> <alias name='ua-b622cde9-ffc4-487b-8038-f7cb7fbc00a1'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> and then I shutdown, activated the extra 2 drives, booted it back up but now I'm still on unit 3: <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/b622cde9-ffc4-487b-8038-f7cb7fbc00a1/7240b4b2-5ab1-40ab-99bb-09c69fd835f6'/> <backingStore/> <target dev='sda' bus='scsi'/> <serial>b622cde9-ffc4-487b-8038-f7cb7fbc00a1</serial> <boot order='1'/> <alias name='ua-b622cde9-ffc4-487b-8038-f7cb7fbc00a1'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/86765f60-4240-44f4-b437-f22b2cc3df1a/482a363e-461a-4f37-876c-43ceb529a93a'/> <backingStore/> <target dev='sdb' bus='scsi'/> <serial>86765f60-4240-44f4-b437-f22b2cc3df1a</serial> <alias name='ua-86765f60-4240-44f4-b437-f22b2cc3df1a'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/0b020d24-3dea-4be7-931a-9c25ccfeec48/7e3957ff-a3bf-4080-a7b6-ddad7f63a299'/> <backingStore/> <target dev='sdc' bus='scsi'/> <serial>0b020d24-3dea-4be7-931a-9c25ccfeec48</serial> <alias name='ua-0b020d24-3dea-4be7-931a-9c25ccfeec48'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> I managed to get things into the correct state by shutting down the VM, deactivating all the disks, then activating them in the order I want them to show up. This sets the correct order of unit 0 for sda, unit 1 for sdb, unit 2 for sdc. Is there some way to make ovirt treat this in a sane way and always expose the scsi devices in the same order as the GUI (and the "target dev" field)? Cheers! Nathan

2 2

Live Migration via NFS
by Douglas Duckworth 09 Aug '18

09 Aug '18

Hi I haven't used oVirt in several years so wanted to ask how live migration may have changed. Can NFS facilitate live migration in cluster of two hosts each which have NFS mounted? The hosts would have local attached storage which would be the original location of VMs.

2 1

Can ping external IPs from VM, but can't curl/resolve DNS (DNS records are set properly)
by sagnik.sasmal2309＠gmail.com 08 Aug '18

08 Aug '18

The title says most of it. I'm using Hetzner (host). Possibly some firewall / filter messing up. vNIC Profiles: https://i.imgur.com/Kf8X8TZ.png

1 0

python error in syslog of all hosts in new HCI default build
by Jayme 08 Aug '18

08 Aug '18

Recently built a three host HCI with oVirt node 4.2.5. I am seeing the following error in each hosts syslog often. What does it mean and how can it be corrected? vdsm[3470]: ERROR Internal server error#012Traceback (most recent call last):#012 File "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 606, in _handle_request#012 res = method(**params)#012 File "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 197, in _dynamicMethod#012 result = fn(*methodArgs)#012 File "/usr/lib/python2.7/site-packages/vdsm/gluster/apiwrapper.py", line 91, in vdoVolumeList#012 return self._gluster.vdoVolumeList()#012 File "/usr/lib/python2.7/site-packages/vdsm/gluster/api.py", line 90, in wrapper#012 rv = func(*args, **kwargs)#012 File "/usr/lib/python2.7/site-packages/vdsm/gluster/api.py", line 818, in vdoVolumeList#012 status = self.svdsmProxy.glusterVdoVolumeList()#012 File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__#012 return callMethod()#012 File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in <lambda>#012 **kwargs)#012 File "<string>", line 2, in glusterVdoVolumeList#012 File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod#012 raise convert_to_error(kind, result)#012AttributeError: 'str' object has no attribute 'iteritems'

2 3

oVirt 4.2.6 + GlusterFS
by radu＠radu.cat 08 Aug '18

08 Aug '18

Hello, I have 24 HP DL360 G7 all with 64G RAM and 1TB SAS disks. What I want to archive is to use all the nodes with ovirt (one will be for the controller + iso domain) and use GluterFS in the same nodes for the storage domain. Idk if anyone tried it before, but I want it to replace my actual "standalone" production hypervisors schema. Thanks in advance

1 0

Fwd: Upgraded to 4.2
by nreaction 08 Aug '18

08 Aug '18

I recently updated to 4.2 and when I restarted ovirt it started shutting down all my guests on host servers, how can I disable ovirt not to do that?

2 1

Failed to hot-plug disk
by Punaatua PK 08 Aug '18

08 Aug '18

Hello, I have a problem when i tried to hotplug a disk to a VM. Here is the situation. We use a VM (let's call this backupVM) which is responsible of doing our VM backup by : - Making a snapshot of the VM we want to backup - Attach the snapshot disk - Make the copy using DD - Unplug the snapshot disk and then delete snapshot. For some reason that i don't know, for certain VM, the backupVM cannot hot plug the snapshot disk. I'm using ovirt 4.2.4 Here is what is see in engine.log 2018-08-04 19:52:30,496-10 ERROR [org.ovirt.engine.core.bll.storage.disk.AttachDiskToVmCommand] (default task-61) [361eca85-ca85-4e23-b292-cd8303a1a86d] Command 'org.ovirt.engine.core.bll.storage.disk.AttachDiskToVmCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to HotPlugDiskVDS, error = internal error: unable to execute QEMU command 'device_add': Failed to get shared "write" lock, code = 45 (Failed with error FailedToPlugDisk and code 45) Here is the vdsm.log 2018-08-04 19:51:38,512-1000 INFO (jsonrpc/5) [virt.vm] (vmId='78ef239f-3cb3-4eef-921f-f989724009ef') Hotplug disk xml: <?xml version='1.0' encoding='utf-8'?> <disk address="" device="disk" snapshot="no" type="file"> <source file="/var/lib/vdsm/transient/225ec856-d661-4374-bb7d-8ea7168fe5f2-b641bb09-325a-4932-a9af-32c907e4a381.D52Nkj" /> <target bus="virtio" dev="vdg" /> <serial>c312a0c3-8c58-472f-99ad-cfbabb42337d</serial> <driver cache="writethrough" error_policy="stop" io="threads" name="qemu" type="qcow2" /> </disk> (vm:3859) 2018-08-04 19:51:38,672-1000 ERROR (jsonrpc/5) [virt.vm] (vmId='78ef239f-3cb3-4eef-921f-f989724009ef') Hotplug failed (vm:3867) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 3865, in hotplugDisk self._dom.attachDevice(driveXml) File "/usr/lib/python2.7/site-packages/vdsm/virt/virdomain.py", line 98, in f ret = attr(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 570, in attachDevice if ret == -1: raise libvirtError ('virDomainAttachDevice() failed', dom=self) libvirtError: internal error: unable to execute QEMU command 'device_add': Failed to get shared "write" lock here is libvirtd log in /var/log/messages libvirtd: 2018-08-05 05:51:38.637+0000: 4967: error : qemuMonitorJSONCheckError:389 : internal error: unable to execute QEMU command 'device_add': Failed to get shared "write" lock Do you guys have any idea of what going on ? How can i check this lock ?

4 5

VirtIO in new upgraded 4.2.5 for FreeBSD is very poor (could not use)
by Paul.LKW 08 Aug '18

08 Aug '18

Dear All: I just upgraded my oVIrt-4.2.4 to 4.2.5 and nightmare begin, FreeBSD VMs hangs once the VM's VirtIO harddisk is some loading (eg. extracting a big tar ball, portsnap extract, etc.), I tried to create a VMs using back the IDE do not has any problem but got slow IO performance once using VirtIO it will hang as it like. I also tried to create another VMs with VirtIO-SCSI it seems the hang problem no occur but I got the oVirt-Host loading over 40 when VM harddisk have some little job, so conclusion is if you guys will using FreeBSD as guest please do not upgrade at the moment. In fact I feel every time the new version always have problem and causing user to nightmare. BR, Paul.LKW

3 2

Space in entity names (VM and Network) in oVirt
by Hari Prasanth Loganathan 08 Aug '18

08 Aug '18

Hi Team, I have VM's and Network's in oVirt with space in the name. How can I perform an exact search for the following name *Name1*: Aug X X *Name2*: Aug X X X 1) I try to search with space in the name, It is not working. https://172.30.60.42/ovirt-engine/api/networks?search=name%3DAug X X It is not returning any result. 2) I try to search with encoded value for space in the name, It is not working. (encoded value for space is %20) https://172.30.60.42/ovirt-engine/api/networks?search=name%3DAug%20X%20X 3) I try to search like below with '*' for space and end up getting both the values in response, https://172.30.60.42/ovirt-engine/api/networks?search=name%3DAug*X so what is the correct way to search the name with space ? Thanks, Hari -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

3 6

Re: Update to 4.2.5, Cant start VMs
by Vincent Royer 08 Aug '18

08 Aug '18

Indeed the Storage domains are via NFS served by Windows Server 2016. the workaround says "use NFSV3", I'm afraid this will break my existing installation. For now, all my VMs are running on one host that is still on 4.2.0. On Tue, Aug 7, 2018 at 2:35 PM Stefano Bovina <bovy89(a)gmail.com> wrote: > I don't know if this fit with your environment, but take a look (See > attachment). > > 2018-08-06 6:02 GMT+02:00 Vincent Royer <vincent(a)epicenergy.ca>: > >> I updated the engine, and one of my nodes to 4.2.5. I'm attempting to >> re-start the VMs that were pinned to it, and migrate another VM to it so >> that I can update my other node. >> >> When I try to start the VMs that were pinned to the host, I get: >> >> VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi' >>> controllers with index '0'. >> >> >> To fix this I tried to detach the disk and re-attach it, no luck. >> >> When I try to migrate a running VM to this host, I get: >> >> Host Letty has network interface which exceeded the defined threshold >>> [95%] (bond0: transmit rate[0%], receive rate [97%]) >> >> >> The host I'm migrating FROM gets a similar error, and the VM does not >> migrate. I tried the different migration policies without any luck. >> >> I did successfully migrate the Hosted Engine to the new host, no errors. >> >> Thanks for any advice! >> >> Vincent >> >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org >> To unsubscribe send an email to users-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/V2EAQ2MRN77DS… >> >> >

1 0

Update to 4.2.5, Cant start VMs
by Vincent Royer 07 Aug '18

07 Aug '18

I updated the engine, and one of my nodes to 4.2.5. I'm attempting to re-start the VMs that were pinned to it, and migrate another VM to it so that I can update my other node. When I try to start the VMs that were pinned to the host, I get: VM Tuning3 is down with error. Exit message: XML error: Multiple 'scsi' > controllers with index '0'. To fix this I tried to detach the disk and re-attach it, no luck. When I try to migrate a running VM to this host, I get: Host Letty has network interface which exceeded the defined threshold [95%] > (bond0: transmit rate[0%], receive rate [97%]) The host I'm migrating FROM gets a similar error, and the VM does not migrate. I tried the different migration policies without any luck. I did successfully migrate the Hosted Engine to the new host, no errors. Thanks for any advice! Vincent

4 5