- Users - oVirt List Archives

OVF_Store In Every Storage Doamin - Can We Remove?
by Matthew J Black 20 Dec '22

20 Dec '22

Hi All, The Subject pretty much sums up the question I want to ask: There are two OVF_Store Disks created in all eight Storage Domains we have, making 16 total. This is cluttering up several of our views in the oVirt Admin Webpages. Is there anything stopping us from deleting some/all of these? Cheers Dulux-Oz

3 2

ovirt node Emulex network
by parallax 20 Dec '22

20 Dec '22

ovirt-node-ng-installer-4.4.10-2022030308.el8 ovirt-node-ng-installer-4.4.10-2022030308 can't recognize network intefaces: 06:00.0 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC (be3) [19a2:0710] (rev 01) 06:00.1 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC (be3) [19a2:0710] (rev 01) 06:00.4 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC (be3) [19a2:0710] (rev 01) 06:00.5 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC (be3) [19a2:0710] (rev 01) anyone know howto fix it ?

3 2

oVirt 4.5.4 is now generally available
by Sandro Bonazzola 19 Dec '22

19 Dec '22

oVirt 4.5.4 is now generally available The oVirt project is excited to announce the general availability of oVirt 4.5.4, as of December 5th, 2022. This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.4. Important notes before you install / upgrade Some of the features included in oVirt 4.5.4 require content that is available in RHEL 8.7 (or newer) and derivatives. NOTE: If you’re going to install oVirt 4.5.4 on RHEL or similar, please read Installing on RHEL or derivatives <https://ovirt.org/download/install_on_rhel.html> first. Documentation Be sure to follow instructions for oVirt 4.5! - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. What’s new in oVirt 4.5.4 Release? This release is available now on x86_64 architecture for: - CentOS Stream 8 - CentOS Stream 9 - RHEL 8.7 and derivatives - RHEL 9.1 and derivatives This release supports Hypervisor Hosts on x86_64: - oVirt Node NG based on CentOS Stream 8 - oVirt Node NG based on CentOS Stream 9 - CentOS Stream 8 - CentOS Stream 9 - RHEL 8.7 and derivatives - RHEL 9.1 and derivatives Builds are also available for ppc64le and aarch64. Known issues: - On EL9 with UEFI secure boot, vdsm fails to decode DMI data due to Bug 2081648 <https://bugzilla.redhat.com/show_bug.cgi?id=2081648> - python-dmidecode module fails to decode DMI data oVirt Node will be released as soon as GitHub Runners will be back online (Ticket opened: https://issues.redhat.com/browse/CPDEVOPS-606 ) See the release notes for installation instructions and a list of new features and bugs fixed. Additional resources: - Read more about the oVirt 4.5.4 release highlights: https://www.ovirt.org/release/4.5.4/ - Check out the latest project news on the oVirt blog: https://blogs.ovirt.org/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING - Red Hat In-Vehicle Operating System Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

2 3

Error try setting up oVirt 4.5 with AD using ovirt-engine-extension-aaa-ldap-setup
by kalilac＠gmail.com 19 Dec '22

19 Dec '22

Hello all. I just did a fresh install of oVirt 4.5 running on top of CentOS 9 Stream. Everything was fine but when I try to setting up to use our AD, using the ovirt-engine-extension-aaa-ldap-setup command, always return me this error: [WARNING] Cannot resolve Global Catalog SRV record for XXXX.XXX.XX. Please check you have entered correct Active Directory forest name and check that forest is resolvable by your system DNS servers [ ERROR ] Failed to execute stage 'Environment customization': Active Directory forest is not resolvable, please make sure you've entered correct forest name. If for some reason you can't use forest and you need some special configuration instead, please refer to examples directory provided by ovirt-engine-extension-aaa-ldap package. What is strange is that if we try to resolve our AD name responds fine. oVirt version: 4.5.4-1.e|9 CentOS version: Stream 9 Ovirt-engine-extension-aaa-ldap-setup: 1.4.6-1.el9 Anyone passed for this? Best regards

2 2

Thin provisioning max size
by Jean-Louis Dupond 19 Dec '22

19 Dec '22

Hi, This weekend we've got an issue with a disk that did not get extend anymore because of the following reason: > 2022-12-17 12:12:27,852+0100 INFO (libvirt/events) [virt.vm] (vmId='a2926e08-d19b-4e3a-98fa-cc1ee241a037') abnormal vm stop device ua-6ccc3ee1-02e5-4fad-b1b7-9f2d6c187416 error enospc (vm:5185) > 2022-12-17 12:12:27,852+0100 INFO (libvirt/events) [virt.vm] (vmId='a2926e08-d19b-4e3a-98fa-cc1ee241a037') CPU stopped: onIOError (vm:6066) > 2022-12-17 12:12:27,852+0100 INFO (libvirt/events) [virt.vm] (vmId='a2926e08-d19b-4e3a-98fa-cc1ee241a037') drive 'sda' needs extension (storage:963) > 2022-12-17 12:12:27,854+0100 INFO (libvirt/events) [virt.vm] (vmId='a2926e08-d19b-4e3a-98fa-cc1ee241a037') CPU stopped: onSuspend (vm:6066) > 2022-12-17 12:12:27,931+0100 INFO (periodic/3) [virt.vm] (vmId='a2926e08-d19b-4e3a-98fa-cc1ee241a037') Drive sda extended to maximum size, disabling monitoring (thinp:357) Now I looked into the VDSM code, and noticed that some years ago there was a commit https://github.com/oVirt/vdsm/commit/93e955af9e4989711403e81835bb469b2e9cf6… Where the estimate of 1.1x the disk size was used as max size. But is this 1.1x still valid? As for example since some years there are dirty bitmaps etc which all take space in the qcow2 image. As far as I see there is no way to really calculate the exact max size (as it might depend on external factors), but it might be useful to extend the 1.1x to 1.2x for example? Or maybe the limit is not needed anymore at all? Thanks Jean-Louis

1 0

attaching a diskto a vm with the incremental statement
by Nathanaël Blanchet 16 Dec '22

16 Dec '22

Hello, I am used to create new vm with ovirt_vm module. Now, I want that the disk of each new created vm to be with the incremental statement. I tried so: disks: - id: "{{result.disk.id}}" bootable: True interface: virtio_scsi backup: incremental but it seems that the backup item is not implemented. How to attach a disk with the incremental statement?

2 8

Hosted Engine 4.5 Deployment Issues
by nathan.english＠bt.com 15 Dec '22

15 Dec '22

Hi There, Apologies in advanced, I'm sure this has been asked before, but I struggle to find anything in the documentation. I'm currently in the process of deploying my first oVirt instance, and having a issue when the Hosted Engine is trying to Install the Hosted Engine Package. Error from the logs attached. My Environment is behind a proxy, which blocks access to any domain containing the word mirror, so I understand why the error would be thrown. Is there any way to update the repos so I can point them to alternative sources? I have a working local mirror in my environment which does contain all the packages required for oVirt. Kind Regards, Nathan

1 0

oVirt Biz Continuity Plan recovery Q/A
by siebots＠protonmail.com 15 Dec '22

15 Dec '22

Hello all, I am looking into implemented a BCP plan with oVirt, which intends to recover VMs from a secondary SAN LUN (containing VM snapshots from a production oVirt cluster site which is considered to have crashed/burned) and presented to the recovery site oVirt cluster. Since the production cluster is expected to have crashed/burned unexpectedly, leaving the VMs snapshots on the recovery SAN LUN (which is at a different site) intact. However since there can be no Export Domain / Import Domain scenario, I need to know what exact steps I need to perform to re-incorporate/re-hydrate the VMs from the recovery LUN presented to the recover oVirt cluster / KVM hosts. I think that normally an Import Domain offers a "VM Import" tab/option, while regular or non-import Storage Domains don't have the "VM Import" option. I've been trying to track down what exactly is needed in the way of specific steps within the oVirt manager and KVM hosts, besides presenting the recovery SAN LUN to it. Many thanks.

3 2

Unable to start VM with SRIOV IB interface
by oliveira＠uc.pt 15 Dec '22

15 Dec '22

Hi everyone, On a new oVirt 4.4.10.7-1.el8 deployment I am unable to star a VM with a SRIOV IB interface. I always get the message: Error while executing action: login003: Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details: The host nvirt002.lca.uc.pt did not satisfy internal filter HostDevice because the host does not provide requested host devices. The host nvirt000.lca.uc.pt did not satisfy internal filter HostDevice because some of the required host devices are unavailable. The host nvirt003.lca.uc.pt did not satisfy internal filter HostDevice because the host does not provide requested host devices. The host nvirt005.lca.uc.pt did not satisfy internal filter HostDevice because the host does not provide requested host devices. The host nvirt004.lca.uc.pt did not satisfy internal filter HostDevice because the host does not provide requested host devices. The host nvirt001.lca.uc.pt did not satisfy internal filter HostDevice because the host does not provide requested host devices. Given that I am trying to run it on login000 I guess the relevant error is that the host device is unavailable. I cannot find any other errors or messages that seem relevant to this on any other logs. How do I even start debugging this? I have another deployment with 4.3 where it just works. Best Regards and thank you, Miguel Oliveira

2 1

dracut-initqueue Could not boot
by parallax 15 Dec '22

15 Dec '22

I got an error while booting ovirt node and the following error message was displayed: dracut-initqueue timeout - starting I'm trying to boot into recovery mode but I'm getting the following message saying "panel is dead" error screenshots attached ovirt-node-ng-4.4.10.1-0

1 0