- Users - oVirt List Archives

Re: [ovirt-users] [SOLVED] Re: Trying to make ovirt-hosted-engine-setup create a customized Engine-vm on 3.6 HC HE
by Giuseppe Ragusa 30 Nov '15

30 Nov '15

On Wed, Nov 25, 2015, at 12:10, Simone Tiraboschi wrote: > > > On Mon, Nov 23, 2015 at 10:17 PM, Giuseppe Ragusa > <giuseppe.ragusa(a)hotmail.com> wrote: >> On Tue, Oct 27, 2015, at 00:10, Giuseppe Ragusa wrote: >> > On Mon, Oct 26, 2015, at 09:48, Simone Tiraboschi wrote: >> > > >> > > >> > > On Mon, Oct 26, 2015 at 12:14 AM, Giuseppe Ragusa > > <giuseppe.ragusa(a)hotmail.com> wrote: >> > >> Hi all, >> > >> I'm experiencing some difficulties using oVirt 3.6 latest snapshot. >> > >> >> > >> I'm trying to trick the self-hosted-engine setup to create a custom > >> engine vm with 3 nics (with fixed MACs/UUIDs). >> > >> >> > >> The GlusterFS volume (3.7.5 hyperconverged, replica 3, for the > >> engine vm) and the network bridges (ovirtmgmt and other two > >> bridges, called nfs and lan, for the engine vm) have been > >> preconfigured on the initial fully-patched CentOS 7.1 host (plus > >> other two identical hosts which are awaiting to be added). >> > >> >> > >> I'm stuck at a point with the engine vm successfully starting but > >> with only one nic present (connected to the ovirtmgmt bridge). >> > >> >> > >> I'm trying to obtain the modified engine vm by means of a trick > >> which used to work in a previous (aborted because of lacking GlusterFS-by- > >> libgfapi support) oVirt 3.5 test setup (about a year ago, maybe > >> more): I'm substituting the standard /usr/share/ovirt-hosted-engine- > >> setup/templates/vm.conf.in with the following: >> > >> >> > >> vmId=@VM_UUID@ >> > >> memSize=@MEM_SIZE@ >> > >> display=@CONSOLE_TYPE@ >> > >> devices={index:2,iface:ide,address:{ controller:0, target:0,unit:0, > >> bus:1, type:drive},specParams:{},readonly:true,deviceId:@CDROM_UUI- > >> D@,path:@CDROM@,device:cdrom,shared:false,type:disk@BOOT_CDROM@} >> > >> devices={index:0,iface:virtio,format:raw,poolID:@SP_UUID@,volumeID- > >> :@VOL_UUID@,imageID:@IMG_UUID@,specParams:{},readonly:false,domain- > >> ID:@SD_UUID@,optional:false,deviceId:@IMG_UUID@,address:{bus:0x00, > >> slot:0x06, domain:0x0000, type:pci, function:0x0},device:disk,shar- > >> ed:exclusive,propagateErrors:off,type:disk@BOOT_DISK@} >> > >> devices={device:scsi,model:virtio-scsi,type:controller} >> > >> devices={index:4,nicModel:pv,macAddr:02:50:56:3f:c4:b0,linkActive:- > >> true,network:@BRIDGE@,filter:vdsm-no-mac- > >> spoofing,specParams:{},deviceId:@NIC_UUID@,address:{bus:0x00, > >> slot:0x03, domain:0x0000, type:pci, > >> function:0x0},device:bridge,type:interface@BOOT_PXE@} >> > >> devices={index:8,nicModel:pv,macAddr:02:50:56:3f:c4:a0,linkActive:- > >> true,network:lan,filter:vdsm-no-mac- > >> spoofing,specParams:{},deviceId:6c467650-1837-47ea-89bc- > >> 1113f4bfefee,address:{bus:0x00, slot:0x09, domain:0x0000, type:pci, > >> function:0x0},device:bridge,type:interface@BOOT_PXE@} >> > >> devices={index:16,nicModel:pv,macAddr:02:50:56:3f:c4:c0,linkActive- > >> :true,network:nfs,filter:vdsm-no-mac- > >> spoofing,specParams:{},deviceId:4d8e0705-8cb4-45b7-b960- > >> 7f98bb59858d,address:{bus:0x00, slot:0x0c, domain:0x0000, type:pci, > >> function:0x0},device:bridge,type:interface@BOOT_PXE@} >> > >> devices={device:console,specParams:{},type:console,deviceId:@CONSO- > >> LE_UUID@,alias:console0} >> > >> vmName=@NAME@ >> > >> spiceSecureChannels=smain,sdisplay,sinputs,scursor,splayback,sreco- > >> rd,ssmartcard,susbredir >> > >> smp=@VCPUS@ >> > >> cpuType=@CPU_TYPE@ >> > >> emulatedMachine=@EMULATED_MACHINE@ >> > >> >> > >> but unfortunately the vm gets created like this (output from "ps"; > >> note that I'm attaching a CentOS7.1 Netinstall ISO with an embedded > >> kickstart: the installation should proceed by HTTP on the lan > >> network but obviously fails): >> > >> >> > >> /usr/libexec/qemu-kvm -name HostedEngine -S -machine >> > >> pc-i440fx-rhel7.1.0,accel=kvm,usb=off -cpu Westmere -m 4096 - > >> realtime mlock=off >> > >> -smp 2,sockets=2,cores=1,threads=1 -uuid f49da721-8aa6-4422-8b91- > >> e91a0e38aa4a -s >> > >> mbios type=1,manufacturer=oVirt,product=oVirt Node,version=7- > >> 1.1503.el7.centos.2 >> > >> .8,serial=2a1855a9-18fb-4d7a-b8b8-6fc898a8e827,uuid=f49da721-8aa6- > >> 4422-8b91-e91a >> > >> 0e38aa4a -no-user-config -nodefaults -chardev > >> socket,id=charmonitor,path=/var/li >> > >> b/libvirt/qemu/HostedEngine.monitor,server,nowait -mon > >> chardev=charmonitor,id=mo >> > >> nitor,mode=control -rtc base=2015-10-25T11:22:22,driftfix=slew - > >> global kvm-pit.l >> > >> ost_tick_policy=discard -no-hpet -no-reboot -boot strict=on -device > >> piix3-usb-uh >> > >> ci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-scsi- > >> pci,id=scsi0,bus=pci.0,addr >> > >> =0x4 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 > >> =-drive file= >> > >> /var/tmp/engine.iso,if=none,id=drive-ide0-1- > >> 0,readonly=on,format=raw,serial= -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1- > >> 0,bootindex=1 -drive file=/var/run/vdsm/storage/be4434bf-a5fd-44d7-8011- > >> d5e4ac9cf523/b3abc1cb-8a78-4b56-a9b0-e5f41fea0fdc/8d075a8d-730a- > >> 4925-8779-e0ca2b3dbcf4,if=none,id=drive-virtio- > >> disk0,format=raw,serial=b3abc1cb-8a78-4b56-a9b0- > >> e5f41fea0fdc,cache=none,werror=stop,rerror=stop,aio=threads -device > >> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio- > >> disk0,id=virtio-disk0 -netdev > >> tap,fd=26,id=hostnet0,vhost=on,vhostfd=27 -device virtio-net- > >> pci,netdev=hostnet0,id=net0,mac=02:50:56:3f:c4:b0,bus=pci.0,addr=0- > >> x3 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/chan- > >> nels/f49da721-8aa6-4422-8b91- > >> e91a0e38aa4a.com.redhat.rhevm.vdsm,server,nowait -device virtserialport,bus=virtio- > >> serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rh- > >> evm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qem- > >> u/channels/f49da721-8aa6-4422-8b91- > >> e91a0e38aa4a.org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio- > >> serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.gues- > >> t_agent.0 -chardev socket,id=charchannel2,path=/var/lib/libvirt/qe- > >> mu/channels/f49da721-8aa6-4422-8b91-e91a0e38aa4a.org.ovirt.hosted- > >> engine-setup.0,server,nowait -device virtserialport,bus=virtio- > >> serial0.0,nr=3,chardev=charchannel2,id=channel2,name=org.ovirt.hos- > >> ted-engine-setup.0 -chardev socket,id=charconsole0,path=/var/run/ovirt-vmconsole- > >> console/f49da721-8aa6-4422-8b91-e91a0e38aa4a.sock,server,nowait - > >> device virtconsole,chardev=charconsole0,id=console0 -vnc > >> 0:0,password -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -msg > >> timestamp=on >> > >> >> > >> There seem to be no errors in the logs. >> > >> >> > >> I've tried reading some (limited) Python setup code but I've not > >> found any obvious reason why the trick should not work anymore. >> > >> >> > >> I know that 3.6 has different network configuration/management and > >> this could be the hot point. >> > >> >> > >> Does anyone have any further suggestion or clue (code/logs to > >> read)? >> > > >> > > The VM creation path is now a bit different cause we use just vdscli > > library instead of vdsClient. >> > > Please take a a look at mixins.py >> > >> > Many thanks for your very valuable hint: >> > >> > I've restored the original /usr/share/ovirt-hosted-engine- > setup/templates/vm.conf.in and I've managed to obtain the 3-nics- > customized vm by modifying /usr/lib/python2.7/site- > packages/ovirt_hosted_engine_setup/mixins.py like this ("diff -Naur" > output): >> >> Hi Simone, >> it seems that I spoke too soon :( >> >> A separate network issue (already reported to the list) prevented me from successfully closing up the setup in its final phase (registering the host inside the Engine), so all seemed well while being stuck there :) >> >> Now that I've solved that (for which I'm informing the list asap in a separate message) and the setup ended successfully, it seems that the last step of the HE setup (shutdown the Engine vm to place it under HA agent control) starts/creates a "different vm" and my virtual hardware customizations seem to be gone (only one NIC present, connected to ovirtmgmt). >> >> My wild guess: maybe I need BOTH the mixins.py AND the vm.conf.in customizations? ;) > > Yes, you are right: the final configuration is still generated from > the template so you need to fix both. > >> >> It seems (from /etc/ovirt-hosted-engine/hosted-engine.conf) that the Engine vm definition is now in /var/run/ovirt-hosted-engine-ha/vm.conf >> > > > the vm configuration is now read from the shared domain converting > back from the OVF_STORE, the idea is to let you edit it from the > engine without the need to write it on each host. /var/run/ovirt-hosted-engine- > ha/vm.conf is just a temporary copy. > > As you are probably still not able to import the hosted-engine storage > domain in the engine due to a well know bug, your system will fallback > to the initial vm.conf configuration still on the shared storage and > you can manually fix it: Please follow this procedure substituting > '192.168.1.115:_Virtual_ext35u36' with the mount point of hosted- > engine storage domain on your system: > > mntpoint=/rhev/data-center/mnt/192.168.1.115:_Virtual_ext35u36 > dir=`mktemp -d` && cd $dir sdUUID_line=$(grep sdUUID /etc/ovirt-hosted-engine/hosted- > engine.conf) sdUUID=${sdUUID_line:7:36} conf_volume_UUID_line=$(grep > conf_volume_UUID /etc/ovirt-hosted-engine/hosted-engine.conf) > conf_volume_UUID=${conf_volume_UUID_line:17:36} > conf_image_UUID_line=$(grep conf_image_UUID /etc/ovirt-hosted-engine/hosted- > engine.conf) conf_image_UUID=${conf_image_UUID_line:16:36} dd > if=$mntpoint/$sdUUID/images/$conf_image_UUID/$conf_volume_UUID > 2>/dev/null| tar -xvf - > # directly edit vm.conf as you need > tar -cO * | dd > of=$mntpoint/$sdUUID/images/$conf_image_UUID/$conf_volume_UUID > > When your engine will import the hosted-engine storage domain it will > generate an OVF_STORE with the configuration of the engine VM, you > will be able to edit some parameters from the engine and the agent > will read the VM configuration from there. Hi Simone, I followed your advice and modified the vm.conf inside the conf_volume tar archive. Then I put the system (still with only one physical host) in global maintenance from the host: hosted-engine --set-maintenance --mode=global Then i regularly powered off the Engine vm and confirmed it from the host: hosted-engine --vm-status Then restarted it from the host: hosted-engine --vm-start Finally, I exited maintenance from the host: hosted-engine --set-maintenance --mode=none Waited a bit and verified it: hosted-engine --vm-status It all worked as expected! Many thanks again. Regards, Giuseppe > >> >> Many thanks for your assistance (and obviously I just sent a related wishlist item on the HE setup ;) >> >> Regards, >> Giuseppe >> >> >> > *********************************************************************- > *************** >> > >> > --- mixins.py.orig 2015-10-20 16:57:40.000000000 +0200 >> > +++ mixins.py 2015-10-26 22:22:58.351223922 +0100 >> > @@ -25,6 +25,7 @@ >> >import random >> >import string >> >import time >> > +import uuid >> > >> > >> >from ovirt_hosted_engine_setup import constants as ohostedcons >> > @@ -247,6 +248,44 @@ >> >]['@BOOT_PXE@'] == ',bootOrder:1': >> >nic['bootOrder'] = '1' >> >conf['devices'].append(nic) >> > + nic2 = { >> > + 'nicModel': 'pv', >> > + 'macAddr': '02:50:56:3f:c4:a0', >> > + 'linkActive': 'true', >> > + 'network': 'lan', >> > + 'filter': 'vdsm-no-mac-spoofing', >> > + 'specParams': {}, >> > + 'deviceId': str(uuid.uuid4()), >> > + 'address': { >> > + 'bus': '0x00', >> > + 'slot': '0x09', >> > + 'domain': '0x0000', >> > + 'type': 'pci', >> > + 'function': '0x0' >> > + }, >> > + 'device': 'bridge', >> > + 'type': 'interface', >> > + } >> > + conf['devices'].append(nic2) >> > + nic3 = { >> > + 'nicModel': 'pv', >> > + 'macAddr': '02:50:56:3f:c4:c0', >> > + 'linkActive': 'true', >> > + 'network': 'nfs', >> > + 'filter': 'vdsm-no-mac-spoofing', >> > + 'specParams': {}, >> > + 'deviceId': str(uuid.uuid4()), >> > + 'address': { >> > + 'bus': '0x00', >> > + 'slot': '0x0c', >> > + 'domain': '0x0000', >> > + 'type': 'pci', >> > + 'function': '0x0' >> > + }, >> > + 'device': 'bridge', >> > + 'type': 'interface', >> > + } >> > + conf['devices'].append(nic3) >> > >> >cli = self.environment[ohostedcons.VDSMEnv.VDS_CLI] >> >status = cli.create(conf) >> > >> > *********************************************************************- > *************** >> > >> > Obviously this is a horrible ad-hoc hack that I'm not able to generalize/clean- > up now: doing so would involve (apart from a deeper understanding of > the whole setup code/workflow) some well-thought-out design decisions > and, given the effective deprecation of the aforementioned easy-to- > modify vm.conf.in template substituted by hardwired Python program > logic, it seems that such a functionality is not very high on the > development priority list atm ;) >> > >> > Many thanks again! >> > >> > Kind regards, >> > Giuseppe >> > >> > >> Many thanks in advance. >> > >> >> > >> Kind regards, >> > >> Giuseppe >> > >> >> > >> PS: please keep also my address in replying because I'm > >> experiencing some problems between Hotmail and oVirt-mailing- > >> list >> > >> >> > >> _______________________________________________ >> > >> >> > Users mailing list >> > >>Users(a)ovirt.org >> > >>http://lists.ovirt.org/mailman/listinfo/users >> > >>

1 0

Issue with kernel 2.6.32-573.3.1.el6.x86_64?
by Michael Kleinpaste 30 Nov '15

30 Nov '15

So I patched my vhosts and updated the kernel to 2.6.32-573.3.1.el6.x86_64. Afterwards the networking became unstable for my vyatta firewall vm. Lots of packet loss and out of order packets (based on my tshark at the time). Has anybody else experienced this? -- *Michael Kleinpaste* Senior Systems Administrator SharperLending, LLC. www.SharperLending.com Michael.Kleinpaste(a)SharperLending.com (509) 324-1230 Fax: (509) 324-1234

4 7

oVirt 4.0 wishlist: oVirt Engine
by Giuseppe Ragusa 30 Nov '15

30 Nov '15

Hi all, I go on with my wishlist, derived from both solitary mumblings and community talks at the the first Italian oVirt Meetup. I offer to help in coding (work/family schedules permitting) but keep in mind that I'm a sysadmin with mainly C and bash-scripting skills (but hoping to improve my less-than-newbie Python too...) I've sent separate wishlist messages for oVirt Node and VDSM. oVirt Engine: *) add Samba/CTDB/Ganesha capabilities (maybe in the GlusterFS management UI); there are related wishlist items on configuring/managing Samba/CTDB/Ganesha on oVirt Node and on VDSM *) add the ability to manage containers (maybe initially as an exclusive cluster type but allowing it to coexist with GlusterFS); there are related wishlist items on supporting containers on the oVirt Node and on VDSM *) add Open vSwitch direct support (not Neutron-mediated); there are related wishlist items on configuring/managing Open vSwitch on oVirt Node and on VDSM *) add DRBD9 as a supported Storage Domain type, HC/HE too, managed from the Engine UI similarly to GlusterFS; there are related wishlist items on configuring/managing DRBD9 on oVirt Node and on VDSM *) add support for managing/limiting GlusterFS heal/rebalance bandwidth usage in HC setup [1]; this is actually a GlusterFS wishlist item first and foremost, but I hope our use case could be considered compelling enough to "force their hand" a bit ;) Regards, Giuseppe [1] bandwidth limiting seems to be supported only for geo-replication on GlusterFS side; it is my understanding that on non-HC setups the heal/rebalance traffic could be kept separate from hypervisor/client traffic (if a separate, Gluster-only, network is physically available and Gluster cluster nodes have been peer-probed on those network addresses)

1 1

Re: [ovirt-users] Strange permissions on Hosted Engine HA Agent log files
by Giuseppe Ragusa 30 Nov '15

30 Nov '15

On Fri, Nov 27, 2015, at 18:15, Simone Tiraboschi wrote: > > > On Wed, Nov 25, 2015 at 11:53 PM, Giuseppe Ragusa <giuseppe.ragusa(a)hotmail.com> wrote: >> Hi all, >> I'm installing oVirt (3.6) in self-hosted mode, hyperconverged with GlusterFS (3.7.6). >> >> I'm using the oVirt snapshot generated the night between the 18th and 19th of November, 2015. >> >> The (single, at the moment) host and the Engine are both CentOS 7.1 fully up-to-date. >> >> After ovirt-hosted-engine-setup successful completion, I found the following (about 3 days after setup completed) "anomalies": >> >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/agent.log >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-23 >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/broker.log >> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-23 >> >> The listing above comes from a custom security checking script that gives: >> >> "octal permissions" "number of links" "owner" "group" - "absolute pathname" >> >> Is the ominous "666" mark actually intended/necessary? ;-) > > Thanks for the report Giuseppe, I double checked on one of my test systems. > > [root@c71het20151028 ~]# ls -l /var/log/ovirt-hosted-engine-ha/* > -rw-r--r--. 1 root root 10136 Nov 27 18:08 /var/log/ovirt-hosted-engine-ha/agent.log > -rw-r--r--. 1 root root 1769029 Oct 29 17:20 /var/log/ovirt-hosted-engine-ha/agent.log.2015-10-28 > -rw-rw-rw-. 1 vdsm kvm 97685 Oct 29 18:21 /var/log/ovirt-hosted-engine-ha/agent.log.2015-10-29 > -rw-r--r--. 1 root root 3620102 Nov 25 12:09 /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-24 > -rw-rw-rw-. 1 vdsm kvm 715086 Nov 25 17:01 /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-25 > -rw-r--r--. 1 root root 13904 Nov 27 18:09 /var/log/ovirt-hosted-engine-ha/broker.log > -rw-r--r--. 1 root root 9711872 Oct 29 17:20 /var/log/ovirt-hosted-engine-ha/broker.log.2015-10-28 > -rw-rw-rw-. 1 vdsm kvm 468475 Oct 29 18:21 /var/log/ovirt-hosted-engine-ha/broker.log.2015-10-29 > -rw-r--r--. 1 root root 14066693 Nov 25 12:09 /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-24 > -rw-rw-rw-. 1 vdsm kvm 4505277 Nov 25 17:01 /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-25 > > > So I've something 644 root:root and something at 666 vdsm:kvm depending from the rotation date (???). > The directory is 700 vdsm:kvm so it's not really an issue but I think it's still worth to open a bug on that. Many thanks Simone for your confirmation: bug opened https://bugzilla.redhat.com/show_bug.cgi?id=1286568 Regards, Giuseppe >> Do I need to open a bugzilla notification for this? >> Many thanks in advance for your attention. >> >> Regards, >> Giuseppe >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users

1 0

ovirt-engine-sdk-python too slow
by John Hunter 30 Nov '15

30 Nov '15

Hi guys, I am using the ovirt-engine-sdk-python to communicate with the ovirt-engine, I am ok to list the vms but the processing time is too long, like 4.5 seconds, and this line: from ovirtsdk.api import API take almost 3 seconds. This seems a little bit longer than I expected it to be, so I am asking is there a quicker way to communicate with the ovirt-engine? -- Best regards Junwang Zhao Department of Computer Science &Technology Peking University Beijing, 100871, PRC

4 14

Install ovirt locally
by John Hunter 30 Nov '15

30 Nov '15

Hi all, Here is my situation: in my office, we can not access the website out of China, I have to grab my PC home to install the ovirt environment, this makes me sad. Can I download all the packages needed by ovirt at home, store them in my U-disk, and back to office and install the enviroment? I am worry about the package dependency. Does anybody who has done this or does anybody has a better solution for this? Any help would be appreciated :) -- Best regards Junwang Zhao Department of Computer Science &Technology Peking University Beijing, 100871, PRC

3 4

live snapshot merging
by Koen Vanoppen 30 Nov '15

30 Nov '15

Dear Community, Are there plans for live merging of snapshots? I know it is supported from libvirt 1.2.10. Kind regards, Koen

5 8

Networking fails for VM running on Centos6.7.Works on Centos6.5
by mad Engineer 29 Nov '15

29 Nov '15

hello all i am having strange network issue with vms that are running on centos 6.7 ovirt nodes. I recently added one more ovirt node which is running centos6.7 and upgraded from centos6.5 to centos6.7 on all other nodes. All VMs running on nodes with centos6.7 as host Operating system fail to reach network gateway,but if i reboot that same host to centos6.5 kernel everything works fine(with out changing any network configuration). Initially i thought it as configuration issue but its there on all nodes.if i reboot to old kernel everything is working. I am aware about ghost vlan0 issue in centos6.6 kernel.Not aware about any issue in centos6.7 Also all my servers are up to date. All physical interfaces are in access mode VLAN connected to nexus 5k switches. working kernel- 2.6.32-431.20.3.el6.x86_64 non working kernel- 2.6.32-573.8.1.el6.x86_64 Any idea?

3 3

Random VMs stuck in [drm] fb: depth 24,pitch 4096
by kevin parrikar 29 Nov '15

29 Nov '15

Running centos 6.7 and trying to PXE boot centos 6.5 vms but some of them are stuck with this in boot message: [drm] fb: depth 24,pitch 4096 screenshot of vm console: http://snag.gy/7Bhyc.jpg tried restarting vms but its still stuck there rpm -qa |grep kvm qemu-kvm-rhev-tools-0.12.1.2-2.479.el6_7.2.x86_64 qemu-kvm-rhev-0.12.1.2-2.479.el6_7.2.x86_64 rpm -qa |grep seabio seabios-0.6.1.2-30.el6.x86_64 uname -a 2.6.32-431.el6.x86_64 ever seen this behaviour? vms have 8gb/4cpu

1 0

3.6 vm from template with cloud-init. Not able to confirm OK button
by Gianluca Cecchi 29 Nov '15

29 Nov '15

Hello, I have created a template based on a CentOS 7.1 VM where I installed cloud-init. Now I'm trying to create a VM from that template using cloud-init and changing hostname and network parameters. It seems that in "Initial Run" section there is something wrong because if I press OK it doesn't happen anything but a sort of dotted square around the ok button, but I'm not able to see what is the thing that is not ok and correct it..... Can I debug anywhere? BTW: if I succeed in this preliminar test I would like to create a vm pool from this same template where, for every started VM in the pool (stateless is ok for them), a new hostname and a preconfigured static ip is set (I have not and I can't set up a dhcp server on that network). Is something configurable in vm pool with cloud init? Thanks Gianluca

1 1