- Users - oVirt List Archives

Problem to add a node.
by Arthur Cezar Lima de Melo 10 Jul '15

10 Jul '15

Hello again, guys... I am in trouble again: When I try to add some my 3d node I have Install Failed. Here the last log from engine. 2015-07-01 11:11:20,759 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] FINISH, SetVdsStatusVDSCommand, log id: 27123183 2015-07-01 11:11:20,872 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-23) [4906a083] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host host-d.sisfron from cluster Sisfron was chosen as a proxy to execute Stop command on Host host-c.sisfron. 2015-07-01 11:11:20,873 INFO [org.ovirt.engine.core.bll.FenceExecutor] (org.ovirt.thread.pool-8-thread-23) [4906a083] Using Host host-d.sisfron from cluster Sisfron as proxy to execute Stop command on Host host-c.sisfron 2015-07-01 11:11:20,892 INFO [org.ovirt.engine.core.bll.VdsArchitectureHelper] (org.ovirt.thread.pool-8-thread-23) Failed to get architecture type from host information for host 'host-c.sisfron'. Using cluster 'Sisfron' architecture value instead. 2015-07-01 11:11:20,893 INFO [org.ovirt.engine.core.bll.FenceExecutor] (org.ovirt.thread.pool-8-thread-23) [4906a083] Executing <Stop> Power Management command, Proxy Host:host-d.sisfron, Agent:ipmilan, Target Host:host-c.sisfron, Management IP:192.168.131.33, User:root, Options:privlvl=OPERATOR,lanplus,delay=10, Fencing policy:{ fencingEnabled=true, skipFencingIfSDActive=false, skipFencingIfConnectivityBroken=false, hostsWithBrokenConnectivityThreshold=50 } 2015-07-01 11:11:20,911 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] START, FenceVdsVDSCommand(HostName = host-d.sisfron, HostId = 72baa80b-8e83-46c8-9643-54632298b446, targetVdsId = 148a3ae2-8a1c-42b0-bf09-92156927ea40, action = Stop, ip = 192.168.131.33, port = , type = ipmilan, user = root, password = ******, options = 'privlvl=OPERATOR,lanplus,delay=10', policy = '{ fencingEnabled=true, skipFencingIfSDActive=false, skipFencingIfConnectivityBroken=false, hostsWithBrokenConnectivityThreshold=50 }'), log id: 3ad804ab 2015-07-01 11:12:10,998 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] FINISH, FenceVdsVDSCommand, return: Test Failed, [Powering off machine @ IPMI:192.168.131.33...Failed, ipmilan: Failed to connect after 20 seconds], log id: 3ad804ab 2015-07-01 11:12:10,998 WARN [org.ovirt.engine.core.bll.FenceExecutor] (org.ovirt.thread.pool-8-thread-23) [4906a083] Fencing operation failed with proxy host 72baa80b-8e83-46c8-9643-54632298b446, trying another proxy... 2015-07-01 11:12:11,094 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-23) [4906a083] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host host-e.sisfron from cluster Sisfron was chosen as a proxy to execute Stop command on Host host-c.sisfron. 2015-07-01 11:12:11,095 INFO [org.ovirt.engine.core.bll.FenceExecutor] (org.ovirt.thread.pool-8-thread-23) [4906a083] Using Host host-e.sisfron from cluster Sisfron as proxy to execute Stop command on Host host-c.sisfron 2015-07-01 11:12:11,096 INFO [org.ovirt.engine.core.bll.VdsArchitectureHelper] (org.ovirt.thread.pool-8-thread-23) Failed to get architecture type from host information for host 'host-c.sisfron'. Using cluster 'Sisfron' architecture value instead. 2015-07-01 11:12:11,097 INFO [org.ovirt.engine.core.bll.FenceExecutor] (org.ovirt.thread.pool-8-thread-23) [4906a083] Executing <Stop> Power Management command, Proxy Host:host-e.sisfron, Agent:ipmilan, Target Host:host-c.sisfron, Management IP:192.168.131.33, User:root, Options:privlvl=OPERATOR,lanplus,delay=10, Fencing policy:{ fencingEnabled=true, skipFencingIfSDActive=false, skipFencingIfConnectivityBroken=false, hostsWithBrokenConnectivityThreshold=50 } 2015-07-01 11:12:11,117 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] START, FenceVdsVDSCommand(HostName = host-e.sisfron, HostId = 23729a9f-a687-42cf-b3e6-2504ea732d86, targetVdsId = 148a3ae2-8a1c-42b0-bf09-92156927ea40, action = Stop, ip = 192.168.131.33, port = , type = ipmilan, user = root, password = ******, options = 'privlvl=OPERATOR,lanplus,delay=10', policy = '{ fencingEnabled=true, skipFencingIfSDActive=false, skipFencingIfConnectivityBroken=false, hostsWithBrokenConnectivityThreshold=50 }'), log id: 6f8beb33 2015-07-01 11:13:01,204 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] FINISH, FenceVdsVDSCommand, return: Test Failed, [Powering off machine @ IPMI:192.168.131.33...Failed, ipmilan: Failed to connect after 20 seconds], log id: 6f8beb33 2015-07-01 11:13:01,204 ERROR [org.ovirt.engine.core.bll.StopVdsCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] Failed to stop VDS using Primary Power Management agent 2015-07-01 11:13:01,227 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-23) [4906a083] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host host-c.sisfron became non responsive. It has no power management configured. Please check the host status, manually reboot it, and click "Confirm Host Has Been Rebooted" 2015-07-01 11:13:01,247 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] START, SetVdsStatusVDSCommand(HostName = host-c.sisfron, HostId = 148a3ae2-8a1c-42b0-bf09-92156927ea40, status=NonResponsive, nonOperationalReason=NONE, stopSpmFailureLogged=false), log id: 1a96fb96 2015-07-01 11:13:01,249 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] FINISH, SetVdsStatusVDSCommand, log id: 1a96fb96 2015-07-01 11:13:01,273 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-23) [4906a083] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to power fence host host-c.sisfron. Please check the host status and it's power management settings, and then manually reboot it and click "Confirm Host Has Been Rebooted" 2015-07-01 11:13:01,274 ERROR [org.ovirt.engine.core.bll.StopVdsCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] Command org.ovirt.engine.core.bll.StopVdsCommand throw Vdc Bll exception. With error message VdcBLLException: VDS_FENCE_OPERATION_FAILED (Failed with error VDS_FENCE_OPERATION_FAILED and code 5021) 2015-07-01 11:13:01,277 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-23) [4906a083] Correlation ID: 4906a083, Job ID: 91c0393b-61fb-4559-8df7-082834a72cff, Call Stack: null, Custom Event ID: -1, Message: Failed to stop Host host-c.sisfron, (User: null@N/A). 2015-07-01 11:13:01,287 WARN [org.ovirt.engine.core.bll.VdsNotRespondingTreatmentCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] Restart host action failed, updating host 148a3ae2-8a1c-42b0-bf09-92156927ea40 to NonResponsive 2015-07-01 11:13:01,306 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] START, SetVdsStatusVDSCommand(HostName = host-c.sisfron, HostId = 148a3ae2-8a1c-42b0-bf09-92156927ea40, status=NonResponsive, nonOperationalReason=NONE, stopSpmFailureLogged=false), log id: 7d593ef3 2015-07-01 11:13:01,308 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] FINISH, SetVdsStatusVDSCommand, log id: 7d593ef3 2015-07-01 11:13:01,310 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-23) [4906a083] Correlation ID: 160b5809, Job ID: 47210bb5-7772-4202-937b-81d1857f0709, Call Stack: null, Custom Event ID: -1, Message: Host host-c.sisfron is rebooting. 2015-07-01 11:13:01,313 INFO [org.ovirt.engine.core.bll.VdsNotRespondingTreatmentCommand] (org.ovirt.thread.pool-8-thread-23) [4906a083] Lock freed to object EngineLock [exclusiveLocks= key: 148a3ae2-8a1c-42b0-bf09-92156927ea40 value: VDS_FENCE , sharedLocks= ] 2015-07-01 11:13:03,462 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) Connecting to /192.168.131.23 2015-07-01 11:13:03,476 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) Unable to process messages 2015-07-01 11:13:18,755 INFO [org.ovirt.engine.core.bll.storage.FenceVdsManualyCommand] (ajp--127.0.0.1-8702-9) [3835b1fb] Lock Acquired to object EngineLock [exclusiveLocks= key: 148a3ae2-8a1c-42b0-bf09-92156927ea40 value: VDS_FENCE , sharedLocks= ] 2015-07-01 11:13:18,756 INFO [org.ovirt.engine.core.bll.storage.FenceVdsManualyCommand] (org.ovirt.thread.pool-8-thread-18) [3835b1fb] Running command: FenceVdsManualyCommand internal: false. Entities affected : ID: 148a3ae2-8a1c-42b0-bf09-92156927ea40 Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2015-07-01 11:13:18,816 INFO [org.ovirt.engine.core.bll.ClearNonResponsiveVdsVmsCommand] (org.ovirt.thread.pool-8-thread-18) [5e48b81d] Running command: ClearNonResponsiveVdsVmsCommand internal: true. Entities affected : ID: 148a3ae2-8a1c-42b0-bf09-92156927ea40 Type: VDS 2015-07-01 11:13:18,875 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsVMsClearedVDSCommand] (org.ovirt.thread.pool-8-thread-18) [5e48b81d] START, UpdateVdsVMsClearedVDSCommand(HostName = host-c.sisfron, HostId = 148a3ae2-8a1c-42b0-bf09-92156927ea40), log id: 4dd83ef1 [root@hypervisor ovirt-engine]# -- *Arthur Cezar Lima de Melo* Tel: (21) 9 8142 -9079 | (21) 3553-8214 Ramal: 7008 arthur.melo(a)gigacom.com.br <jorge(a)gigacom.com.br> www.gigacom.com.br

2 1

Unable to shutdown, poweroff or delete a VM
by Mark Steele 10 Jul '15

10 Jul '15

We are running oVirt Version 3.5.0.1-1.el6. I have a VM on one of my hosts that appears to be stuck. The VM shows running, however I am unable to successfully shutdown, powerdown, or otherwise change the status of the VM. It is not pinging. The guest OS is Ubuntu 14.04 and the ovirt agent is installed. I have attempted to stop the vm from the ovirt-shell as well and get the following errors for each command: [oVirt shell (*connected*)]# action vm connect-turbo-stage-03 stop *============================================================== ERROR ===========================================================* * status: 400* * reason: Bad Request* * detail: Unexpected exception* * ================================================================================================================================* [oVirt shell (*connected*)]# remove vm connect-turbo-stage-03 *============================================================== ERROR ===========================================================* * status: 409* * reason: Conflict* * detail: Cannot remove VM. VM is running.* * ================================================================================================================================* [oVirt shell (*connected*)]# action vm connect-turbo-stage-03 detach *============================================================== ERROR ===========================================================* * status: 400* * reason: Bad Request* * detail: User is not authorized to perform this action.* * ================================================================================================================================* *Thank you in advance for your assistance.* *** *Mark Steele* CIO / VP Technical Operations | TelVue Corporation TelVue - We Share Your Vision 800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com twitter: http://twitter.com/telvue | facebook: https://www.facebook.com/telvue

2 1

how to configure virtio-scsi as a default disk interface in userportal/webadmin?
by David Jaša 09 Jul '15

09 Jul '15

Hi, I was wondering about $SUBJ. Is it governed by interfaces order in osinfo properties? Or somewhere else? I hope that virtio-blk isn't hardcoded... Best regards, David Jaša

1 0

Cannot add host to cluster - install fails
by Mitja Mihelič 08 Jul '15

08 Jul '15

Dear all, We are running the following setup: ovirt-engine host: - CentOS release 6.6 - ovirt-engine-3.5.3.1-1.el6.noarch node: - CentOS Linux release 7.1.1503 - vdsm-4.16.20-0.el7.centos.x86_64 While adding a new host to our cluster the package installations fail. I have attached a piece of engine.log and a full ovirt-host-deploy* log from the node. Why is is happening? Help would be very much appreciated. Kind regards, Mitja -- Mitja Mihelič ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia tel: +386 1 479 8877, fax: +386 1 479 88 78

3 4

Moving a hosted engine
by Soeren Malchow 07 Jul '15

07 Jul '15

--_000_D1C0449212017soerenmalchowmconnet_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Dear all, Is there somewhere a document or information on how to move a hosted engine= form one cluster to another ? Right now we still have one cluster running fedora 20 that is also running = the hosted engine and we have one cluster running CentOS 7.1 where the host= ed engine should go. Any advice how to proceed with this ? Regerds Soeren --_000_D1C0449212017soerenmalchowmconnet_ Content-Type: text/html; charset="us-ascii" Content-ID: <E320801BBE112E4AB89473AF1B0C48BB(a)liquidcampaign.com> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > </head> <body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-lin= e-break: after-white-space; color: rgb(0, 0, 0); font-size: 14px; font-fami= ly: Calibri, sans-serif;"> <div>Dear all,</div> <div><br> </div> <div>Is there somewhere a document or information on how to move a hosted e= ngine form one cluster to another ?</div> <div><br> </div> <div>Right now we still have one cluster running fedora 20 that is also run= ning the hosted engine and we have one cluster running CentOS 7.1 where the= hosted engine should go.</div> <div><br> </div> <div>Any advice how to proceed with this ?</div> <div><br> </div> <div>Regerds</div> <div>Soeren </div> </body> </html> --_000_D1C0449212017soerenmalchowmconnet_--

2 1

Re: [ovirt-users] oVirt 3.5.3 Host Network Interfaces
by Soeren Malchow 07 Jul '15

07 Jul '15

Dear Michael We actually created the ovirtmgmt and the bond manually upfront and then in the ³Setup Hosts Network² we basically did this again (including setting the IP address), regarding the bonding in the gluster network we did not have a problem, you just drag one interface onto the other and then select the bonding mode, where you can also go for bonding mode TLB or ALB if you choose ³custom² or just LACP if you have switches that support this. Step by Step: - set the engine to maintenance and shut it down - configure the bond on the 2 nics for the ovirtmgmt bridge ( em1+em2 -> bond0 -> ovirtmgmt ) - configure the IP on the bridge - reboot the server and see whethter it comes up correctly - remove maintenance and let engine start - Set up the ovirtmgmt in hosts networks but do not forget to set IP and Gateway as well. Though it should work without this hassle (if the bonding mode on the switch and server is compatible) but this way it is easy to get server and switch in the same mode and working without having to do anything in ovirt first. Hope that helps Regards Soeren On 02/07/15 00:31, "users-bounces(a)ovirt.org on behalf of Prof. Dr. Michael Schefczyk" <users-bounces(a)ovirt.org on behalf of michael(a)schefczyk.net> wrote: >Dear All, > >Having set up a Centos 7 server with Gluster, oVirt 3.5.3 and hosted >engine according to >https://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/, >I was hoping that the NIC management and particularly NIC bond/bridge >capabilities would have improved a bit. My server has four NICs, two >connected to the LAN and two to an adjacent server to be used as a >Gluster network between the two servers. My aim is to use NIC bonding for >two NICs each. > >Via the engine, I would like to use Hosts -> Network Interfaces -> Setup >Host Networks. As I use hosted engine, I cannot set the only host to >maintenance mode. At least during normal operations, however, I am >neither able to change the ovirt bridge from DHCP to static IP nor create >a bond consisting of the two LAN facing NICs. In each case I get, "Error >while executing action Setup Networks: Network is currently being used". >Editing the network scripts manually is not an option either, as that >does not survive a reboot. Contrary to this real view, everything should >be easily configurable according to section 6.6 of the oVirt >administration guide. > >One workaround approach could be to temporarily move one NIC connection >from the adjacent server to the LAN or even temporarily swap both pairs >of NICs and edit interfaces while they are not in use. Is this really the >way forward? Should there not be a more elegant approach not requiring >physically plugging NIC connections just to work around such issue? > >Regards, > >Michael > >

2 1

Metadata error on hosted engine (fresh install)
by Matteo 06 Jul '15

06 Jul '15

Hi all, I've activated oVirt 3.5 with the hosted engine setup using CentOS 7 as host and CentOS 6 as engine OS. The storage for the hosted engine is iSCSI. The setup went smooth, I've some vm running on top of it without many issues. Right now I've some issue with hosted engine metadata: if I try to add an additional node, at the end of the deploy sequence it fails with error: Failed to execute stage 'Setup validation': Metadata version 9 from host 5 too new for this agent (highest compatible version: 1) On the first host, "hosted-engine --check-liveliness" confirms that the engine is up (Hosted Engine is up!) , but "hosted-engine --vm-status" fails with a python exception: Traceback (most recent call last): File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main "__main__", fname, loader, pkg_name) File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code exec code in run_globals File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/vm_status.py", line 116, in <module> if not status_checker.print_status(): File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/vm_status.py", line 59, in print_status all_host_stats = ha_cli.get_all_host_stats() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 155, in get_all_host_stats return self.get_all_stats(self.StatModes.HOST) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats stats = self._parse_stats(stats, mode) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", line 141, in _parse_stats md = metadata.parse_metadata_to_dict(host_id, data) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/metadata.py", line 147, in parse_metadata_to_dict constants.METADATA_FEATURE_VERSION)) ovirt_hosted_engine_ha.lib.exceptions.FatalMetadataError: Metadata version 9 from host 5 too new for this agent (highest compatible version: 1) looking into metadata file, which is really a block device (via some symlinks), I see a lot of binary data after plain ascii text. Dumping this device results into a 134MB file. ( if someome is curious, the dump is here: https://cloud.brancaleoni.com/index.php/s/4Lx3M5PXkqhO80N ) Reading other posts where the setup was over nfs was suggested to truncate the file, but this is a device file and I'm not sure what to do. Any hint on where I can look at ? Thanks, Matteo

2 4

GlusterFS Hyperconvergence
by Tiemen Ruiten 06 Jul '15

06 Jul '15

Hello, I'm in the planning stage of setting up a new oVirt cluster, where I would prefer to use the local disks of the hypervisors for a GlusterFS storage domain. What is the current recommendation (for version 3.5.x)? I found this presentation which seems to suggest that it's possbile with some caveats: http://www.ovirt.org/images/6/6c/2015-ovirt-glusterfs-hyperconvergence.pdf And a few open bugs: https://bugzilla.redhat.com/show_bug.cgi?id=1177791 https://bugzilla.redhat.com/show_bug.cgi?id=1177775 https://bugzilla.redhat.com/show_bug.cgi?id=1177773 What I can't find is current information on if this setup is already possible with 3.5.x or it's better to wait for 3.6. Could someone enlighten me? -- Tiemen Ruiten Systems Engineer R&D Media

3 6

macspoof custom property lost after restore from snapshot
by Yedidyah Bar David 06 Jul '15

06 Jul '15

Hi all, Using current nightly build of the 3.5 branch: * Had a vm * Powered it off * Edited and set macspoof=true * Created a snapshot * Previewed that snapshot * Committed * Checked custom properties - macspoof is not set Known issue? Should I open a bug? What logs/etc should I attach? Thanks, -- Didi

2 1

Autostart VM
by Koen Vanoppen 06 Jul '15

06 Jul '15

Hi Guys, I couldn't find anything directly concerning my following question, so If it was asked before, I'm sorry... Is there a way to config ovirt in a way that when you created a new vm, it will automatically boot? Because now, when you create a VM it stays in down state. Kind regards, Koen

3 3