- Users - oVirt List Archives

Re: Veeam Backup for RHV (oVirt)
by markeczzz＠gmail.com 29 Jul '22

29 Jul '22

Ah, I see.. Then, is there any good guide or documentation how to revert from Keycloak to AAA? All I could find is how to move from AAA to Keycloak, but not reverse.

2 4

Import machines
by Demeter Tibor 28 Jul '22

28 Jul '22

Dear Listmembers, Is it possible to import ovirt 4.3's VMs into a new ovirt environment via our old storage domains? I have an old 4.3 self-hosted system with 3 storage domain, but it seems very difficult upgrade until 4.5. I just wondering, what if I do install a complety new system and just attach the old storge domains to that. Is it will work ? If yes, what will do it with our VM-s and networks. Thanks in advance, Regards. Tibor

2 1

Veeam Backup for RHV (oVirt)
by markeczzz＠gmail.com 27 Jul '22

27 Jul '22

Hi! Not really sure if this is right place to ask, but.. I am trying to use Veeam Backup for Red Hat Virtualization on oVirt 4.5.1. I have been using it on version 4.4.10.7 and it works ok there. On Veeam Release page it says that supported OS is RHV 4.4SP1 (oVirt 4.5). When i try to do backup, this is what i get from Veeam backup. No errors in vdsm.log and engine.log.. 2022-07-27 08:08:44.153 00039 [19545] INFO | [LoggingEventsManager_39]: Add to storage LoggingEvent [id: 34248685-a193-4df5-8ff2-838f738e211c, Type: BackupStartedNew] 2022-07-27 08:08:44.168 00039 [19545] INFO | [TaskManager_39]: Create and run new async task. [call method:'RunBackupChain'] 2022-07-27 08:08:44.168 00039 [19545] INFO | [AsyncTask_39]: New AsynTask created [id:'aafa22ac-ff2e-4647-becb-dca88e3eb67f', description:'', type:'BACKUP_VM_POLICY'] 2022-07-27 08:08:44.168 00039 [19545] INFO | [AsyncTask_39]: Prepare AsynTask to run [id:'aafa22ac-ff2e-4647-becb-dca88e3eb67f'] 2022-07-27 08:08:44.176 00031 [19545] INFO | [BackupPolicy_31]: Refresh VMs for policy '6e090c98-d44b-4785-acb4-82a627da5d9b' 2022-07-27 08:08:44.176 00031 [19545] INFO | [BackupPolicy_31]: Begin updating list of active VMs for policy '6e090c98-d44b-4785-acb4-82a627da5d9b' [forceRefresh = True] 2022-07-27 08:08:44.176 00031 [19545] INFO | [RhevCluster_31]: Test connection to cluster [IP: engine.example.org, Port: 443, User: admin@ovirt@internalsso] 2022-07-27 08:08:44.189 00039 [19545] INFO | [TaskManager_39]: AsyncTask registered. [id:'aafa22ac-ff2e-4647-becb-dca88e3eb67f'] 2022-07-27 08:08:44.371 00031 [19545] INFO | [RhevCluster_31]: Test connection to cluster success. Status: Success. Message: 2022-07-27 08:08:44.556 00031 [19545] INFO | [BackupPolicyManager_31]: Refreshing the policies data... 2022-07-27 08:08:44.556 00031 [19545] INFO | [BackupPolicy_31]: Begin updating list of active VMs for policy '6e090c98-d44b-4785-acb4-82a627da5d9b' [forceRefresh = False] 2022-07-27 08:08:44.556 00031 [19545] INFO | [BackupPolicy_31]: List of active VMs updated for policy '6e090c98-d44b-4785-acb4-82a627da5d9b' [forceRefresh = False]. Number of active VMs '1' 2022-07-27 08:08:44.556 00031 [19545] INFO | [BackupPolicyManager_31]: Policies data has been refreshed. 2022-07-27 08:08:44.556 00031 [19545] INFO | [BackupPolicy_31]: List of active VMs updated for policy '6e090c98-d44b-4785-acb4-82a627da5d9b' [forceRefresh = True]. Number of active VMs '1' 2022-07-27 08:08:44.556 00031 [19545] INFO | [BackupPolicy_31]: Found the '1' VMs to backup in policy '6e090c98-d44b-4785-acb4-82a627da5d9b' 2022-07-27 08:08:44.564 00031 [19545] INFO | [BackupPolicy_31]: * Parallel policy runner has started * for policy [Name:'test5', ID: '6e090c98-d44b-4785-acb4-82a627da5d9b' 2022-07-27 08:08:44.564 00031 [19545] INFO | [VeeamBackupServer_31]: Test connection to backup server [IP: 'veeambr.example.org', Port: '10006', User: 'rhvproxy'] 2022-07-27 08:08:44.931 00031 [19545] INFO | [VeeamBackupServer_31]: Test connection to backup server [IP: 'veeambr.example.org', Port: '10006']. Connection status: ConnectionSuccess. Version: 11.0.1.1261 2022-07-27 08:08:45.423 00031 [19545] INFO | [BackupPolicy_31]: Successfully called CreateVeeamPolicySession for job [UID: '6e090c98-d44b-4785-acb4-82a627da5d9b'], session [UID: 'aafa22ac-ff2e-4647-becb-dca88e3eb67f'] 2022-07-27 08:08:45.820 00031 [19545] INFO | [BackupPolicy_31]: Successfully called RetainPolicyVms for job [UID: '6e090c98-d44b-4785-acb4-82a627da5d9b'] with VMs: 50513a65-6ccc-479b-9b61-032e0961b016 2022-07-27 08:08:45.820 00031 [19545] INFO | [BackupPolicy_31]: Start calculating maxPointsCount 2022-07-27 08:08:45.820 00031 [19545] INFO | [BackupPolicy_31]: End calculating maxPointsCount. Result = 7 2022-07-27 08:08:45.820 00031 [19545] INFO | [BackupPolicy_31]: Starting validate repository schedule. Repository [UID: '237e41d6-7c67-4a1f-80bf-d7c73c481209', MaxPointsCount: '7', IsPeriodicFullRequired: 'False'] 2022-07-27 08:08:46.595 00031 [19545] INFO | [BackupPolicy_31]: End validate repository schedule. Result: [IsScheduleValid: 'True', ErrorMessage: ''] 2022-07-27 08:08:46.597 00031 [19545] INFO | [SessionManager_31]: Start registering a new session[Id: 'b6f3f0e1-7aab-41cb-b0e7-10f5b2ed6708'] 2022-07-27 08:08:46.639 00031 [19545] INFO | [SessionManager_31]: Session registered. [Id:'b6f3f0e1-7aab-41cb-b0e7-10f5b2ed6708'] 2022-07-27 08:08:46.639 00031 [19545] INFO | [BackupPolicy_31]: Backup VM [id:'50513a65-6ccc-479b-9b61-032e0961b016'] starting... 2022-07-27 08:08:46.639 00031 [19545] INFO | [BackupPolicy_31]: RetentionMergeDisabled: false 2022-07-27 08:08:46.640 00031 [19545] INFO | [TaskManager_31]: Create new async task. [call method:'DoBackup'] 2022-07-27 08:08:46.640 00031 [19545] INFO | [AsyncTask_31]: New AsynTask created [id:'15a63192-f3d2-4e3a-af56-240f3733bded', description:'', type:'BACKUP_VM'] 2022-07-27 08:08:46.640 00031 [19545] INFO | [AsyncTask_31]: Prepare AsynTask to run [id:'15a63192-f3d2-4e3a-af56-240f3733bded'] 2022-07-27 08:08:46.661 00031 [19545] INFO | [TaskManager_31]: AsyncTask registered. [id:'15a63192-f3d2-4e3a-af56-240f3733bded'] 2022-07-27 08:08:47.295 00031 [19545] ERROR | [BackupPolicy_31]: Backup VM [id:'50513a65-6ccc-479b-9b61-032e0961b016'] failed. Error ('test: VM UUID=50513a65-6ccc-479b-9b61-032e0961b016 was not found: * Line 1, Column 1 Syntax error: value, object or array expected. * Line 1, Column 1 A valid JSON document must be either an array or an object value. ') Are there any changes between version 4.5 and 4.5.1 that are preventing using this? Any solution? Regards,

3 2

oVirt 4.2 host cert expired
by Don Dupuis 27 Jul '22

27 Jul '22

Hello I have an environment with quite a lot of hosts using local storage domains. The engine and hosts cert expired. I ran engine-setup on the ovirt-engine so that the engine cert would get updated and then followed this https://access.redhat.com/solutions/3532921 to manually update the hosts certs so that hopefully the engine can talk to vdsm and then carry out the cert enrollment process, but no luck. I am getting is error in vdsm.log: 2022-07-26 18:32:12,743-0500 INFO (Reactor thread) [ProtocolDetector.AcceptorImpl] Accepted connection from ::ffff: 192.168.50.26:58194 (protocoldetector:61) 2022-07-26 18:32:12,760-0500 ERROR (Reactor thread) [ProtocolDetector.SSLHandshakeDispatcher] ssl handshake: SSLError, address: ::ffff:192.168.50.26 (sslutils:263) and the engine.log: 2022-07-26 03:30:13,242-05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to host01/192.168.50.72 2022-07-26 03:30:13,257-05 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages General SSLEngine problem 2022-07-26 03:30:13,260-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-12) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM host01 command Get Host Capabilities failed: General SSLEngine problem I substituted host01 for the real FQDN for this post. I can't get the hosts in a mode so that I can put it in maintenance mode and I also want to be carefull about reinstalling because the vms are stored on local storage domain on host. Fingerprints match on the certs and when I sign the vdsmcert on the engine and then copy back to the proper localtions, libvirtd and vdsmd restart fine, just the SSL ERROR. Anyone have any ideas on how to solve this cert issue? Thanks Don

1 1

Intel xeon gold 6346 supported
by atatur.yildirim＠gmail.com 26 Jul '22

26 Jul '22

Hello all, Is intel xeon gold 6346 cpu supported in ovirt, I couldn't exactly determine from the docs. Thank you..

2 3

Support for OpenStack Glance is now deprecated
by francesco＠shellrent.com 25 Jul '22

25 Jul '22

Hi all, as I read in the documentation https://www.ovirt.org/documentation/administration_guide/index.html: "Support for OpenStack Glance is now deprecated. This functionality will be removed in a later release." Do you know any alternative to Glance for a "single point" images archives for creating template that could be integrated with oVirt or do I need to use storage domain for achieve a similar result? Thank you for your time and help, Francesco

1 0

Failed to connect to the host via ssh: root@192.168.4.17: Permission denied (publickey, gssapi-keyex, gssapi-with-mic, password).
by konstantinluschaev＠ya.ru 24 Jul '22

24 Jul '22

An attempt to deploy a new host fails. Deploy I see the following error in the deploy log: 192.168.4.17: Failed to connect to host via ssh: root(a)192.168.4.17 : Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password). Despite the fact that the root user logs into the host via ssh from the ovirt-engine without any problems. So I understand that ansible scripts cannot get through ssh. Do you have any ideas about this? ovirt-engine version 4.4.10.6-1.el8 Centos Stream 8 host - CentOS Stream 8

3 2

oVirt over gluster: Replacing a dead host
by Gilboa Davara 23 Jul '22

23 Jul '22

Hello all, I'm attempting to replace a dead host in a replica 2 + arbiter gluster setup and replace it with a new host. I've already set up a new host (same hostname..localdomain) and got into the cluster. $ gluster peer status Number of Peers: 2 Hostname: office-wx-hv3-lab-gfs Uuid: 4e13f796-b818-4e07-8523-d84eb0faa4f9 State: Peer in Cluster (Connected) Hostname: office-wx-hv1-lab-gfs.localdomain <------ This is a new host. Uuid: eee17c74-0d93-4f92-b81d-87f6b9c2204d State: Peer in Cluster (Connected) $ gluster volume info GV2Data Volume Name: GV2Data Type: Replicate Volume ID: c1946fc2-ed94-4b9f-9da3-f0f1ee90f303 Status: Stopped Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: office-wx-hv1-lab-gfs:/mnt/LogGFSData/brick <------ This is the dead host. Brick2: office-wx-hv2-lab-gfs:/mnt/LogGFSData/brick Brick3: office-wx-hv3-lab-gfs:/mnt/LogGFSData/brick (arbiter) ... Looking at the docs, it seems that I need to remove the dead brick. $ gluster volume remove-brick GV2Data office-wx-hv1-lab-gfs:/mnt/LogGFSData/brick start Running remove-brick with cluster.force-migration enabled can result in data corruption. It is safer to disable this option so that files that receive writes during migration are not migrated. Files that are not migrated can then be manually copied after the remove-brick commit operation. Do you want to continue with your current cluster.force-migration settings? (y/n) y volume remove-brick start: failed: Removing bricks from replicate configuration is not allowed without reducing replica count explicitly So I guess I need to drop from replica 2 + arbiter to replica 1 + arbiter (?). $ gluster volume remove-brick GV2Data replica 1 office-wx-hv1-lab-gfs:/mnt/LogGFSData/brick start Running remove-brick with cluster.force-migration enabled can result in data corruption. It is safer to disable this option so that files that receive writes during migration are not migrated. Files that are not migrated can then be manually copied after the remove-brick commit operation. Do you want to continue with your current cluster.force-migration settings? (y/n) y volume remove-brick start: failed: need 2(xN) bricks for reducing replica count of the volume from 3 to 1 ... What am I missing? - Gilboa

3 10

Task Run PKI enroll request for vdsm and QEMU failed to execute. Ovirt 4.5.1
by xavierl＠rogers.com 22 Jul '22

22 Jul '22

Hi there, I am currently at a loss as to why I am unable to install additional nodes and am receiving the error: "Task Run PKI enroll request for vdsm and QEMU failed to execute" Running oVirt node 4.5.1 and would appreciate any assistance as there's no other forums discussing this issue. I have Logs ready at request. Cheers

3 4

ovirt-aaa-jdbc-tool and Keycloak
by Gilboa Davara 22 Jul '22

22 Jul '22

Hello all, I have a number of oVirt clusters that were recently upgraded to v.4.5.1. As far as I can see, once keycloak is enabled, local users can no longer login. (only admin@ovirt works). Assuming I need to continue using local AAA users (created using ovirt-aaa-jdbc-tool), should I disable keycloak support? How do I do it? (engine-setup?). - Gilboa

1 0