- Users - oVirt List Archives

importing a single qcow2/raw disk
by Nathanaël Blanchet 15 Apr '15

15 Apr '15

Hi all, Is it possible to simply import a single qcow/raw into storage domain disk without creating a dedicated qemu-kvm with it and then importing the full vm with virt-v2v? Thank you.

1 0

many dd ioctl messages on the SPM host.
by Arman Khalatyan 15 Apr '15

15 Apr '15

Hi, I can see many dd: sending ioctl 80306d02 to a partition! messages on my CentOS 7.1 SPM host. I the top I can see that lvm process is using 100%. My migration from iscsiA to iscsiB storage is terrible slow. The lvm process always changing its pid. /sbin/lvm lvextend --config devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ 'a|/dev/mapper/149455400000000007265735f69534353494c6f676963616c|/dev/mapper/360014056427aebd90ef41b1b5df2cd79|', 'r|.*|' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } --autobackup n --size 5373952m ab17ac41-3c43-4a57-902e-a88577d4a6c1/a57c120c-190a-4122-8f71-5d78dd5279c1 Are there some problems with migration? I am using ovirt 3.5.x with iscsi storage. *********************************************************** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany ***********************************************************

1 0

[QE][ACTION REQUIRED] oVirt 3.5.2 and 3.5.3 status
by Sandro Bonazzola 15 Apr '15

15 Apr '15

Hi, We have 1 open blocker for 3.5.2[1]: Bug ID Whiteboard Status Summary 1154399 network ASSIGNED VDSM script reset network configuration on every reboot when based on predefined bond and 1 dependency not yet fixed: Bug ID Status Whiteboard Summary 1209486 POST network Networks created by vdsm are not persisted ACTION: Assignee please provide an ETA for above bugs and check if they must block GA requiring another release candidate before GA. We still have 1 bugs in MODIFIED and 3 on QA[2]: MODIFIED ON_QA Total network 0 1 1 sla 1 0 1 storage 0 1 1 virt 0 1 1 Total 1 3 4 ACTION: Testers: you're welcome to verify bugs currently ON_QA. ACTION: Assingee and Maintainers to check modified bugs to see if they're fixed in RC4 All remaining bugs not marked as blockers have been moved to 3.5.3. A release management entry has been added for tracking the schedule of 3.5.3[3] A bug tracker [4] has been created for 3.5.3 and currently shows no blockers. We have 26 bugs currently targeted to 3.5.3[5]: Whiteboard NEW ASSIGNED POST Total docs 1 0 0 1 external 1 0 0 1 gluster 1 0 0 1 infra 1 1 1 3 network 1 0 1 2 node 4 0 1 5 ppc 0 0 1 1 sla 4 0 0 4 storage 4 0 2 6 ux 1 0 0 1 virt 1 0 0 1 Total 19 1 6 26 ACTION: Maintainers / Assignee: to review the bugs targeted to 3.5.3 ensuring they're correctly targeted. ACTION: Maintainers: to fill release notes for 3.5.2, the page has been created and updated here [6] ACTION: Testers: please add yourself to the test page [7] [1] https://bugzilla.redhat.com/1186161 [2] http://goo.gl/UEVTCf [3] http://www.ovirt.org/OVirt_3.5.z_Release_Management#oVirt_3.5.3 [4] https://bugzilla.redhat.com/1198142 [5] https://bugzilla.redhat.com/buglist.cgi?quicksearch=product%3Aovirt%20targe… [6] http://www.ovirt.org/OVirt_3.5.2_Release_Notes [7] http://www.ovirt.org/Testing/oVirt_3.5.2_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Network profile not being populated in cluster
by Pavel Gandalipov 15 Apr '15

15 Apr '15

Hi, I have a problem with Vnic Profiles assigning. In the current release 3.5 after creating not required logical network(and assigning it to cluster) i can't apply it profile in VM Edit Network interface menu. In 3.4 it works without any additional config. Should i change something to apply another Vnic profile that belongs to not default logical network? I also don't see "empty network" that was in 3.4. Regards, Pavel Gandalipov

1 0

[QE] oVirt 3.6.0 status
by Sandro Bonazzola 15 Apr '15

15 Apr '15

Hi, here's an update on 3.6 status on integration / rel-eng side The tracker bug for 3.6.0 [1] currently shows no blockers. Repository closure is currently broken on Fedora 20 due to a missing required dependency on recent libvirt, a patch fixing this issue is currently under review[4]. There are 521 bugs [2] targeted to 3.6.0. NEW ASSIGNED POST Total docs 10 0 0 10 external 1 0 0 1 gluster 25 22 20 67 i18n 2 0 0 2 infra 59 5 6 70 integration 40 2 5 47 network 42 2 9 53 node 26 3 2 31 sla 51 3 2 56 spice 1 0 0 1 storage 63 2 8 73 ux 33 0 2 35 virt 59 6 10 75 Total 412 45 64 521 Features submission is still open until 2015-04-22 as per current release schedule. Maintainers: be sure to have your features tracked in the google doc[3] On Integration side: * Progress on Hosted Engine Hyper Converged support * Progress on Hosted Engine additional hosts deploy from WEB UI * Progress on Glance docker integration * Progress on Fedora 22 packaging * Progress on backup / restore RFEs On Release engineering side: * CentOS Virt SIG: CBS tag hierarchy requested * Fedora: pushed some dependencies for Fedora inclusion * Worked with infra team YAMLizing jenkins build jobs * Moved to QE all bugs included in 2015/04/13 nightly snapshot, starting QE testing on master You're welcome to join QE effort[5] by testing nightly master snapshot[6] on test systems [1] https://bugzilla.redhat.com/1155425 [2] https://bugzilla.redhat.com/buglist.cgi?quicksearch=target_release%3A3.6.0%… [3] http://goo.gl/9X3G49 [4] https://gerrit.ovirt.org/39249 [5] http://www.ovirt.org/OVirt_Quality_Assurance [6] http://www.ovirt.org/Install_nightly_snapshot -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Problems with adding a host in Ovirt (Hosted Engine) behind a proxy server. (The additional Host can't see the Storage Domain)
by Julián Tete 14 Apr '15

14 Apr '15

Hello Friends of oVirt, I'd setup a oVirt enviroment (hosted-engine) behind a proxy. But I can't add any additional Host to my Cluster. I'm phase of testing (SELinux Permissive, No firewall) All the machines are CentOS 7.1 When I try to add a Host, the operation it's OK, but don't see the Data Master Storage and the operation at the ends fails, and the additional host it's Non Operational. My FQDN Engine: ovirt.udistritaloas.edu.co FQDN Host with the Host-Engine and with the Data Master Storage: patascoy.udistritaloas.edu.co FQDN Additional host: sotara.udistritaloas.edu.co This is the problem's resume: 2015-Apr-13, 17:08 Failed to connect Host Sotara to Storage Pool OAS 2015-Apr-13, 17:08 Host Sotara cannot access the Storage Domain(s) <UNKNOWN> attached to the Data Center OAS. Setting Host state to Non-Operational. 2015-Apr-13, 17:08 Failed to connect Host Sotara to Storage Servers 2015-Apr-13, 17:08 The error message for connection patascoy.udistritaloas.edu.co:/oVirt/vms returned by VDSM was: Problem while trying to mount target 2015-Apr-13, 17:08 Failed to connect Host Sotara to the Storage Domains PatascoyVMS. 2015-Apr-13, 17:06 Host Sotara installed 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Termination. 2015-Apr-13, 17:06 Installing Host Sotara. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-20150413170647-10.20.0.31-520f4408.log'. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Pre-termination. 2015-Apr-13, 17:06 Installing Host Sotara. Starting vdsm. 2015-Apr-13, 17:06 Installing Host Sotara. Stopping libvirtd. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Closing up. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Transaction commit. 2015-Apr-13, 17:06 Installing Host Sotara. Enrolling certificate. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Misc configuration. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Package installation. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Misc configuration. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Transaction setup. 2015-Apr-13, 17:06 Installing Host Sotara. Hardware supports virtualization. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Setup validation. 2015-Apr-13, 17:06 Installing Host Sotara. Disabling Kdump integration. 2015-Apr-13, 17:06 Installing Host Sotara. Logs at host located at: '/tmp/ovirt-host-deploy-20150413170601-bxfvlk.log'. 2015-Apr-13, 17:06 Installing Host Sotara. Kdump supported. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Environment customization. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Programs detection. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Environment packages setup. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Environment setup. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Initializing. 2015-Apr-13, 17:06 Installing Host Sotara. Connected to host 10.20.0.31 with SSH key fingerprint: 3c:82:f9:bd:5d:b5:dd:3b:be:6d:bd:a2:9a:28:88:b1. 2015-Apr-13, 17:06 Host Sotara was added by admin@internal. Logs in Additional Host: /var/log/vdsm/vdsm.log http://pastebin.com/sP2DYHiF Can you help me ? Thanks in advance Hello Friends of oVirt, I'd setup a oVirt enviroment (hosted-engine) behind a proxy. But I can't add any additional Host to my Cluster. I'm phase of testing (SELinux Permissive, No firewall) All the machines are CentOS 7.1 When I try to add a Host, the operation it's OK, but don't see the Data Master Storage and the operation at the ends fails, and the additional host it's Non Operational. My FQDN Engine: ovirt.udistritaloas.edu.co FQDN Host with the Host-Engine and with the Data Master Storage: patascoy.udistritaloas.edu.co FQDN Additional host: sotara.udistritaloas.edu.co This is the problem's resume: 2015-Apr-13, 17:08 Failed to connect Host Sotara to Storage Pool OAS 2015-Apr-13, 17:08 Host Sotara cannot access the Storage Domain(s) <UNKNOWN> attached to the Data Center OAS. Setting Host state to Non-Operational. 2015-Apr-13, 17:08 Failed to connect Host Sotara to Storage Servers 2015-Apr-13, 17:08 The error message for connection patascoy.udistritaloas.edu.co:/oVirt/vms returned by VDSM was: Problem while trying to mount target 2015-Apr-13, 17:08 Failed to connect Host Sotara to the Storage Domains PatascoyVMS. 2015-Apr-13, 17:06 Host Sotara installed 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Termination. 2015-Apr-13, 17:06 Installing Host Sotara. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-20150413170647-10.20.0.31-520f4408.log'. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Pre-termination. 2015-Apr-13, 17:06 Installing Host Sotara. Starting vdsm. 2015-Apr-13, 17:06 Installing Host Sotara. Stopping libvirtd. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Closing up. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Transaction commit. 2015-Apr-13, 17:06 Installing Host Sotara. Enrolling certificate. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Misc configuration. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Package installation. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Misc configuration. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Transaction setup. 2015-Apr-13, 17:06 Installing Host Sotara. Hardware supports virtualization. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Setup validation. 2015-Apr-13, 17:06 Installing Host Sotara. Disabling Kdump integration. 2015-Apr-13, 17:06 Installing Host Sotara. Logs at host located at: '/tmp/ovirt-host-deploy-20150413170601-bxfvlk.log'. 2015-Apr-13, 17:06 Installing Host Sotara. Kdump supported. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Environment customization. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Programs detection. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Environment packages setup. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Environment setup. 2015-Apr-13, 17:06 Installing Host Sotara. Stage: Initializing. 2015-Apr-13, 17:06 Installing Host Sotara. Connected to host 10.20.0.31 with SSH key fingerprint: 3c:82:f9:bd:5d:b5:dd:3b:be:6d:bd:a2:9a:28:88:b1. 2015-Apr-13, 17:06 Host Sotara was added by admin@internal. Logs in Additional Host: /var/log/vdsm/vdsm.log http://pastebin.com/sP2DYHiF Can you help me ? Thanks in advance

2 1

Integrated process for import VMs from VMware!
by Arik Hadas 14 Apr '15

14 Apr '15

Hi All, We are working these days on implementing an integrated process for import virtual machines from different sources, other than oVirt's export/data domains, that will be introduced in oVirt 3.6. A glimpse on how you can use it to import a VM from VMware into oVirt is available at: https://www.youtube.com/watch?v=QSss__Nl5rU Regards, Arik

3 3

[ANN] oVirt 3.5.2 Fourth Release Candidate is now available for testing
by Sandro Bonazzola 14 Apr '15

14 Apr '15

The oVirt team is pleased to announce that the 3.5.2 Fourth Release Candidate is now available for testing as of Apr 14th 2015. The release candidate is available now for Fedora 20, Red Hat Enterprise Linux 6.6, CentOS 6.6 (or similar) and Red Hat Enterprise Linux 7.1, CentOS 7.1 (or similar). This release of oVirt includes numerous bug fixes. See the release notes [1] for a list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. New oVirt Live and oVirt Node ISO will be available soon as well[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.5.2_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[DISCUSSION] oVirt Weekly Sync Goals and Future.
by Yaniv Dary 14 Apr '15

14 Apr '15

This is a multi-part message in MIME format. --------------030803020106080807060405 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, In my opinion the current format can be replaced by a etherpad update that is sent as a newsletter every week. The current format doesn't add a lot of value to the project work and doesn't create a real sync on the ongoing topics. No decisions are done today there as well. What do you think should be the goal of the weekly meeting? How can we improve it? Is a newsletter a good enough update? Thanks! -- Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: ydary(a)redhat.com IRC : ydary --------------030803020106080807060405 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, In my opinion the current format can be replaced by a etherpad update that is sent as a newsletter every week. The current format doesn't add a lot of value to the project work and doesn't create a real sync on the ongoing topics. No decisions are done today there as well. What do you think should be the goal of the weekly meeting? How can we improve it? Is a newsletter a good enough update? Thanks! <pre class="moz-signature" cols="72">-- Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: <a class="moz-txt-link-abbreviated" href="mailto:ydary@redhat.com">ydary(a)redhat.com</a> IRC : ydary</pre> </body> </html> --------------030803020106080807060405--

4 5

Re: [ovirt-users] Locked NFS SD
by shimano 14 Apr '15

14 Apr '15

This happened when I tried to switch the SD "mi-ci-3" to maintenance mode while copying template's disk image from "mi-ci-1" to "mi-ci-5" (and "mi-ci-3" also had this image already copied). I have already fixed this by some changes in DB and destroy SD. My installation is not self-hosted deploy. I'll try to dig logs from that situation today and post it here (I produce really a loot of logs)... 2015-04-13 17:45 GMT+02:00 Bob Doolittle <bob(a)doolittle.us.com>: > Are you using a self-hosted deployment? If so, this may be the issue > that's been reported for almost a year now that results in an inability to > shutdown cleanly due to sanlock leases being held which result in watchdog > timeouts that cause a system to reboot instead of shutdown. See for > example: http://lists.ovirt.org/pipermail/users/2014-May/024652.html > > I still experience this with 3.5.1. When I poweroff my machine I have to > physically be there to hit the power switch when it tries to reboot after > the wdmd watchdog timeout. I notice during shutdown that the storage > domains fail to unmount. > > -Bob >

1 0