- Users - oVirt List Archives

Re: [ovirt-users] Don't start vm
by Roman Nikolayevich Drovalev 16 Dec '14

16 Dec '14

Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME. --=_alternative 00406F2D43257DB0_= Content-Type: text/plain; charset="US-ASCII" Hi, > > > > Hi, > > answer below > > > > > > Nir Soffer <nsoffer(a)redhat.com> > > > > > > > > > > Hi, > > > > > > > > > > > > I attach the file. Below log in the vdsm.log.62.xz > > > > > > > > > > > > The given nonexistent disk has probably appeared after template > > > > removal > > > > > > from which it has been created. > > > > > > BUT it was independent and before problems was not, after template > > > > > > removal! > > > > > > The disk exists, but at it has changed ID! > > > > > > > > > > I don't understand this description. > > > > > > > > > > Can you describe to steps to reproduce this issue? > > > > > > > > > > Guessing from your description: > > > > > 1. Create vm with x disks > > > > > 2. Create template > > > > > 3. Create vm from template > > > > > 4. Remove template > > > > > ? > > > > > > > > Yes. > > > > 1. Create vm with x disks on the DS 3524 through FC (multipathd on > > vdsm) > > > > 2. Create template > > > > 3. Create vm (independent) from template > > > > 4. Start vm and job in the vm > > > > 5. Remove template > > > > 6. Stop vm > > > > 7. Don`t start vm with error > > > > > > Do you mean - start vm fail with error about missing lv? > Yes > > > > > > > > 8. seek it disk - #lsblk > > > > > > Can you share the output of lsblk both before and after you stop the vm? No, since vm does not start! > > > > > > > > 9. many command with block 253:20 > > > > > > Not sure what do you mean by that > > You did not explain what you mean Hm, ?? vgchange .... > > > > Note: do *not* activate all lvs using "vgchange -a y" > > > Only vdsm should activate its volumes. > > > > OK! If vm don`t start, how to take data from vm? > > Of course if you need to troubshoot the system, and the vm is not > running, there is no problem to access the lv directly. > > Even then, you should *not* activate all lvs in a vg using > > vgchange -a y > > But activate only the lv you want to access using > > lvchange -a y Thank you, did not know > > > > > > > > > > 10. mount finded lvm in lvm volume and save data > > > > > > Mount? how mount is related to lvm? > > > > VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm! > > You mean you activate the lv on the host? Yes, intro LVM vdsm > > > > > 12. reboot all vdsm host > > > > 13. dont't find ID it disk! ID it disk changed! > > > > > > Please share output of lvs both before and after the vm is stopped. > > > > Before > > -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/ > fb8466c9-0867-4e73-8362-2c95eea89a83 > > After - > > /dev/9d53ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9- > b772-4ebda3b0cd22 > > This not the output of lvs, these are the symlinks to the active lvs. > > Can you share the lvs output before and after the vm is stopped? No, since the vm does not start! > > > > > Now the problem disk has again received old ID(lvdisplay), BUT I have > > already removed it! > > I'm not sure what you mean. Can you share the output of lvdisplay before > and after the operation? > Already is not present, I have removed this problem disk > > > > The Mysticism! > > > > At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them see till > > now (lvdisplay on the vdsm host) Why? > > Did you update lvm cache using "pvscan --cache"? No. I should after each operation with disks, do in the console "pvscan - cache"? > > > > > In general my problem has begun that on Windows 2008 Vm the empty seat has > > come to an end. > > What do you mean by that? This is first problem! Second problem - don't start the vm. > > > I have expanded volume in web gui. When I began to expand > > a disk in VM - error. > > > lvdisplay on the vdsm host has shown the old size of > > a disk! > > Is the volume preallocated or thin provisioned? All my disks - prelocated. > > Preallocated volumes are extended when you modify the volume size in > engine ui (as you described). Thin provisioned volumes are extended > only when the available space is bellow a threshold, so the lv > size will not change after you modify the volume size. > > > > > Sometimes normally all works! > > Do you mean that now everything works? The VM it has been removed, since for a week I could not start it! Now all works on others VM. But there were 2 problems! My problem to understand, that I have made not so or it is a problem oVirt. I wish to use oVirt, but is not assured of it because of these problems! > > > > > How I understand, probably, "all ok" when you work with VM which are on > > SPM host??! > > Lost you here. It agree, a head around )) Thanks Roma --=_alternative 00406F2D43257DB0_= Content-Type: text/html; charset="US-ASCII" Hi, <tt> > > > > Hi, > > answer below > > > > > > Nir Soffer <nsoffer(a)redhat.com> > > > > > > > > > > Hi, > > > > > > > > > > > > I attach the file. Below log in the vdsm.log.62.xz > > > > > > > > > > > > The given nonexistent disk has probably appeared after template > > > > removal > > > > > > from which it has been created. > > > > > > BUT it was independent and before problems was not, after template > > > > > > removal! > > > > > > The disk exists, but at it has changed ID! > > > > > > > > > > I don't understand this description. > > > > > > > > > > Can you describe to steps to reproduce this issue? > > > > > > > > > > Guessing from your description: > > > > > 1. Create vm with x disks > > > > > 2. Create template > > > > > 3. Create vm from template > > > > > 4. Remove template > > > > > ? > > > > > > > > Yes. > > > > 1. Create vm with x disks on the DS 3524 through FC (multipathd on > > vdsm) > > > > 2. Create template > > > > 3. Create vm (independent) from template > > > > 4. Start vm and job in the vm > > > > 5. Remove template > > > > 6. Stop vm > > > > 7. Don`t start vm with error > > > > > > Do you mean - start vm fail with error about missing lv? > </tt> <tt>Yes</tt> <tt>  > > > > > > > > 8. seek it disk - #lsblk > > > > > > Can you share the output of lsblk both before and after you stop the vm?</tt> <tt>No,  since vm does not start!</tt> <tt> > > > > > > > > 9. many command with block 253:20 > > > > > > Not sure what do you mean by that > > You did not explain what you mean</tt> <tt>Hm, ?? vgchange ....</tt> <tt> > > > > Note: do *not* activate all lvs using "vgchange -a y" > > > Only vdsm should activate its volumes. > > > > OK! If vm don`t start, how to take data from vm? > > Of course if you need to troubshoot the system, and the vm is not > running, there is no problem to access the lv directly. > > Even then, you should *not* activate all lvs in a vg using > >     vgchange -a y > > But activate only the lv you want to access using > >     lvchange -a y</tt> <tt>Thank you, did not know</tt> <tt> > > > > > > > > > > 10. mount finded  lvm in lvm volume and save data > > > > > > Mount? how mount is related to lvm? > > > > VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm! > > You mean you activate the lv on the host?</tt> <tt>Yes, intro LVM vdsm</tt> <tt> > > > > > 12. reboot all vdsm host > > > > 13. dont't find ID it disk! ID it disk changed! > > > > > > Please share output of lvs both before and after the vm is stopped. > > > > Before > > -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/ > fb8466c9-0867-4e73-8362-2c95eea89a83 > > After   - > > /dev/9d53ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9- > b772-4ebda3b0cd22 > > This not the output of lvs, these are the symlinks to the active lvs. > > Can you share the lvs output before and after the vm is stopped?</tt> <tt>No,  since the vm does not start!</tt> <tt> > > > > > Now the problem disk has again received old ID(lvdisplay), BUT I have > > already removed it! > > I'm not sure what you mean. Can you share the output of lvdisplay before > and after the operation? > </tt> <tt>Already is not present, I have removed this problem disk</tt> <tt> > > > > The Mysticism! > > > > At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them see till > > now (lvdisplay on the vdsm host) Why? > > Did you update lvm cache using "pvscan --cache"?</tt> <tt>No. I should after each operation with disks, do in the console "pvscan - cache"?</tt> <tt> > > > > > In general my problem has begun that on Windows 2008 Vm the empty seat has > > come to an end. > > What do you mean by that?</tt> <tt>This is first problem! Second problem - don't start the vm. </tt> <tt> > > > I have expanded volume in web gui. When I began to expand > > a disk in VM - error. > > > lvdisplay on the vdsm host has shown the old size of > > a disk! > > Is the volume preallocated or thin provisioned?</tt> <tt>All my disks - prelocated.</tt> <tt> > > Preallocated volumes are extended when you modify the volume size in > engine ui (as you described). Thin provisioned volumes are extended > only when the available space is bellow a threshold, so the lv > size will not change after you modify the volume size. > > > > > Sometimes normally all works! > > Do you mean that now everything works?</tt> <tt>The VM it has been removed, since for a week I could not start it!</tt> <tt>Now all works on others VM. But there were 2 problems! My problem to understand, that I have made not so or it is a problem oVirt. </tt> <tt>I wish to use oVirt, but is not assured of it because of these problems!</tt> <tt> > > > > > How I understand, probably, "all ok" when you work with VM which are on > > SPM host??! > > Lost you here. </tt> <tt>It agree, a head around ))</tt> <tt>Thanks</tt> <tt>Roma </tt> --=_alternative 00406F2D43257DB0_=--

1 0

Installtion fail for Ovirt engine in CentOS 6.5
by Yue, Cong 15 Dec '14

15 Dec '14

--_000_ED08B56256B38842A463A2A0804C5AC0326ACA3ACAsvrcaexch1atg_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi I am trying to install Ovirt engine into centOS6.5 according to the manual = as folows: http://www.ovirt.org/Quick_Start_Guide#Install_oVirt_Engine_.28Fedora_.2F_R= ed_Hat_Enterprise_Linux_.2F_CentOS.29 I met one error during engine-setup, the message is as follows: ---- [root@ovirt-mgmnt user1]# engine-setup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20141215113915-w7bbrh.log Version: otopi-1.3.0 (otopi-1.3.0-1.el6) [ INFO ] Stage: Environ= ment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: En= vironment setup [ INFO ] Stage: Environment customization --=3D=3D PRODUCT OPTIONS =3D=3D-- Configure Engine on this host (Yes, No) [Yes]: Configure WebSocket Proxy on this host (Yes, No) [Yes]: --=3D=3D PACKAGES =3D=3D-- [ INFO ] Checking for product updates... [ INFO ] No product updates found --=3D=3D ALL IN ONE CONFIGURATION =3D=3D-- --=3D=3D NETWORK CONFIGURATION =3D=3D-- Setup can automatically configure the firewall on this system. Note: automatic configuration of the firewall may overwrite curre= nt settings. Do you want Setup to configure the firewall? (Yes, No) [Yes]: [ INFO ] iptables will be configured as firewall manager. Host fully qualified DNS name of this server [ovirt-mgmnt]: [WARNING] Host name ovirt-mgmnt has no domain suffix [WARNING] Failed to re= solve ovirt-mgmnt using DNS, it can be resolved only locally --=3D=3D DATABASE CONFIGURATION =3D=3D-- Where is the Engine database located? (Local, Remote) [Local]: Setup can configure the local postgresql server automatically for= the engine to run. This may conflict with existing applications. Would you like Setup to automatically configure postgresql and cr= eate Engine database, or prefer to perform that manually? (Automatic, Manual) [Automatic]: --=3D=3D OVIRT ENGINE CONFIGURATION =3D=3D-- Engine admin password: Confirm engine admin password: [WARNING] Password is weak: it is based on a dictionary word Use weak password? (Yes, No) [No]: Yes Application mode (Both, Virt, Gluster) [Both]: --=3D=3D PKI CONFIGURATION =3D=3D-- Organization name for certificate [Test]: --=3D=3D APACHE CONFIGURATION =3D=3D-- Setup can configure the default page of the web server to present= the application home page. This may conflict with existing applications. Do you wish to set the application as the default page of the web= server? (Yes, No) [Yes]: Setup can configure apache to use SSL using a certificate issued = from the internal CA. Do you wish Setup to configure that, or prefer to perform that ma= nually? (Automatic, Manual) [Automatic]: --=3D=3D SYSTEM CONFIGURATION =3D=3D-- Configure an NFS share on this server to be used as an ISO Domain= ? (Yes, No) [Yes]: Local ISO domain path [/var/lib/exports/iso]: Local ISO domain ACL - note that the default will restrict access= to ovirt-mgmnt only, for security reasons [ovirt-mgmnt(rw)]: Local ISO domain name [ISO_DOMAIN]: --=3D=3D MISC CONFIGURATION =3D=3D-- --=3D=3D END OF CONFIGURATION =3D=3D-- [ INFO ] Stage: Setup validation [WARNING] Less than 16384MB of memory is available --=3D=3D CONFIGURATION PREVIEW =3D=3D-- Application mode : both Datacenter storage type : False Firewall manager : iptables Update Firewall : True Host FQDN : ovirt-mgmnt Engine database name : engine Engine database secured connection : False Engine database host : localhost Engine database user name : engine Engine database host name validation : False Engine database port : 5432 Engine installation : True NFS setup : True PKI organization : Test NFS mount point : /var/lib/exports/iso NFS export ACL : ovirt-mgmnt(rw) Configure local Engine database : True Set application as default page : True Configure Apache SSL : True Configure WebSocket Proxy : True Please confirm installation settings (OK, Cancel) [OK]: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping we= bsocket-proxy service [ INFO ] Stage: Misc configuration [ INFO ] Stage: = Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating= PostgreSQL 'engine' database [ ERROR ] Failed to execute stage 'Misc confi= guration': Command '/sbin/service' failed to execute [ INFO ] Yum Performi= ng yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20141215113915-w7bbrh.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20141215114117-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed ---- Do I need do more preparations before install ovirt engine? I am using ovir= t3.5 as the manual above advised. Thanks, Cong ________________________________ This e-mail message is for the sole use of the intended recipient(s) and ma= y contain confidential and privileged information. Any unauthorized review,= use, disclosure or distribution is prohibited. If you are not the intended= recipient, please contact the sender by reply e-mail and destroy all copie= s of the original message. If you are the intended recipient, please be adv= ised that the content of this message is subject to access, review and disc= losure by the sender's e-mail System Administrator. --_000_ED08B56256B38842A463A2A0804C5AC0326ACA3ACAsvrcaexch1atg_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> Hi<o:p></o:p> <o:p> </o:p> I am trying to install Ovirt engine into centOS6.= 5 according to the manual as folows:<o:p></o:p> <a href=3D"http://www.ovirt.org/Quick_Start_Guide= #Install_oVirt_Engine_.28Fedora_.2F_Red_Hat_Enterprise_Linux_.2F_CentOS.29"= >http://www.ovirt.org/Quick_Start_Guide#Install_oVirt_Engine_.28Fedora_.2F_= Red_Hat_Enterprise_Linux_.2F_CentOS.29</a><o:p></o:p> <o:p> </o:p> I met one error during engine-setup, the message = is as follows:<o:p></o:p> <o:p> </o:p> ----<o:p></o:p> [root@ovirt-mgmnt user1]# engine-setup<o:p></o:p>= [ INFO  ] Stage: Initializing<o:p></o:p> [ INFO  ] Stage: Environment setup<o:p></o:p= >         &= nbsp; Configuration files:<o:p></o:p> ['/etc/ovirt-engine-setup.conf.d/10-packaging-jbo= ss.conf',<o:p></o:p> '/etc/ovirt-engine-setup.conf.d/10-packaging.conf= ']<o:p></o:p>         &= nbsp; Log file:<o:p></o:p> /var/log/ovirt-engine/setup/ovirt-engine-setup-20= 141215113915-w7bbrh.log<o:p></o:p>         &= nbsp; Version: otopi-1.3.0 (otopi-1.3.0-1.el6) [ INFO  ] Stage: Enviro= nment packages setup [ INFO  ] Stage: Programs detection [ INFO  = ] Stage: Environment setup [ INFO  ] Stage: Environment customization<= o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D PRODUCT OPTIONS =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Configure Engine on this host (Yes, No) [Yes]:<o:p></o:p>         &= nbsp; Configure WebSocket Proxy on this host (Yes, No) [Yes]:<o:p></o:p></p= > <o:p> </o:p>         &= nbsp; --=3D=3D PACKAGES =3D=3D--<o:p></o:p> <o:p> </o:p> [ INFO  ] Checking for product updates...<o:= p></o:p> <o:p> </o:p> [ INFO  ] No product updates found<o:p></o:p= > <o:p> </o:p>         &= nbsp; --=3D=3D ALL IN ONE CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p> <o:p> </o:p>         &= nbsp; --=3D=3D NETWORK CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Setup can automatically configure the firewall on this system.<o:p></= o:p>         &= nbsp; Note: automatic configuration of the firewall may overwrite current s= ettings.<o:p></o:p>         &= nbsp; Do you want Setup to configure the firewall? (Yes, No)<o:p></o:p> [Yes]: [ INFO  ] iptables will be configured= as firewall manager.<o:p></o:p>         &= nbsp; Host fully qualified DNS name of this server [ovirt-mgmnt]:<o:p></o:p= > [WARNING] Host name ovirt-mgmnt has no domain suf= fix [WARNING] Failed to resolve ovirt-mgmnt using DNS, it can be resolved o= nly locally<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D DATABASE CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Where is the Engine database located? (Local, Remote) [Local]:<o:p></= o:p>         &= nbsp; Setup can configure the local postgresql server automatically for the= engine to run. This may conflict with existing applications.<o:p></o:p></p= >         &= nbsp; Would you like Setup to automatically configure postgresql and create= Engine database, or prefer to perform that manually?<o:p></o:p> (Automatic, Manual) [Automatic]:<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D OVIRT ENGINE CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Engine admin password:<o:p></o:p>         &= nbsp; Confirm engine admin password:<o:p></o:p> [WARNING] Password is weak: it is based on a dict= ionary word<o:p></o:p>         &= nbsp; Use weak password? (Yes, No) [No]: Yes<o:p></o:p>         &= nbsp; Application mode (Both, Virt, Gluster) [Both]:<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D PKI CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Organization name for certificate [Test]:<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D APACHE CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Setup can configure the default page of the web server to present the= application home page. This may conflict with existing applications.<o:p><= /o:p>         &= nbsp; Do you wish to set the application as the default page of the web ser= ver? (Yes, No) [Yes]:<o:p></o:p>          =  Setup can configure apache to use SSL using a certificate issued from= the internal CA.<o:p></o:p>         &= nbsp; Do you wish Setup to configure that, or prefer to perform that manual= ly? (Automatic, Manual) [Automatic]:<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D SYSTEM CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p>          =  Configure an NFS share on this server to be used as an ISO Domain? (Y= es, No) [Yes]:<o:p></o:p>         &= nbsp; Local ISO domain path [/var/lib/exports/iso]:<o:p></o:p>         &= nbsp; Local ISO domain ACL - note that the default will restrict access to = ovirt-mgmnt only, for security reasons [ovirt-mgmnt(rw)]:<o:p></o:p>         &= nbsp; Local ISO domain name [ISO_DOMAIN]:<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D MISC CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p> <o:p> </o:p>         &= nbsp; --=3D=3D END OF CONFIGURATION =3D=3D--<o:p></o:p> <o:p> </o:p> [ INFO  ] Stage: Setup validation<o:p></o:p>= [WARNING] Less than 16384MB of memory is availabl= e<o:p></o:p> <o:p> </o:p>         &= nbsp; --=3D=3D CONFIGURATION PREVIEW =3D=3D--<o:p></o:p> <o:p> </o:p>         &= nbsp; Application mode        &nbsp= ;            &n= bsp;  : both<o:p></o:p>         &= nbsp; Datacenter storage type       &nbs= p;         : False<o:p></o:p>         &= nbsp; Firewall manager        &nbsp= ;            &n= bsp;  : iptables<o:p></o:p>         &= nbsp; Update Firewall         =             &nb= sp;   : True<o:p></o:p>         &= nbsp; Host FQDN          =             &nb= sp;        : ovirt-mgmnt<o:p></o:p>         &= nbsp; Engine database name        &= nbsp;           : engine<= o:p></o:p>         &= nbsp; Engine database secured connection      : Fa= lse<o:p></o:p>         &= nbsp; Engine database host        &= nbsp;           : localho= st<o:p></o:p>         &= nbsp; Engine database user name       &n= bsp;       : engine<o:p></o:p>         &= nbsp; Engine database host name validation    : False<o:p></= o:p>         &= nbsp; Engine database port        &= nbsp;           : 5432<o:= p></o:p>         &= nbsp; Engine installation         &= nbsp;           : Tr= ue<o:p></o:p>         &= nbsp; NFS setup          =             &nb= sp;        : True<o:p></o:p>         &= nbsp; PKI organization        &nbsp= ;            &n= bsp;  : Test<o:p></o:p>         &= nbsp; NFS mount point         =             &nb= sp;   : /var/lib/exports/iso<o:p></o:p>         &= nbsp; NFS export ACL         &= nbsp;           &nbs= p;    : ovirt-mgmnt(rw)<o:p></o:p>         &= nbsp; Configure local Engine database      &n= bsp;  : True<o:p></o:p>         &= nbsp; Set application as default page      &n= bsp;  : True<o:p></o:p>         &= nbsp; Configure Apache SSL        &= nbsp;           : True<o:= p></o:p>         &= nbsp; Configure WebSocket Proxy       &n= bsp;       : True<o:p></o:p> <o:p> </o:p>          =  Please confirm installation settings (OK, Cancel) [OK]:<o:p></o:p></p= > [ INFO  ] Stage: Transaction setup<o:p></o:p= > [ INFO  ] Stopping engine service<o:p></o:p>= [ INFO  ] Stopping ovirt-fence-kdump-listene= r service [ INFO  ] Stopping websocket-proxy service [ INFO  ] St= age: Misc configuration [ INFO  ] Stage: Package installation [ INFO&n= bsp; ] Stage: Misc configuration [ INFO  ] Creating PostgreSQL 'engine' database [ ERROR ] Failed to execute stage 'Misc configuration': = Command '/sbin/service' failed to execute [ INFO  ] Yum Performing yum= transaction rollback [ INFO  ] Stage: Clean up<o:p></o:p>         &= nbsp; Log file is located at<o:p></o:p> /var/log/ovirt-engine/setup/ovirt-engine-setup-20= 141215113915-w7bbrh.log<o:p></o:p> [ INFO  ] Generating answer file<o:p></o:p><= /p> '/var/lib/ovirt-engine/setup/answers/201412151141= 17-setup.conf'<o:p></o:p> [ INFO  ] Stage: Pre-termination<o:p></o:p><= /p> [ INFO  ] Stage: Termination<o:p></o:p> [ ERROR ] Execution of setup failed<o:p></o:p></p= > ----<o:p></o:p> <o:p> </o:p> Do I need do more preparations before install ovi= rt engine? I am using ovirt3.5 as the manual above advised.<o:p></o:p> <o:p> </o:p> Thanks,<o:p></o:p> Cong<o:p></o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> </div> <hr> This e-mail message is for t= he sole use of the intended recipient(s) and may contain confidential and p= rivileged information. Any unauthorized review, use, disclosure or distribu= tion is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy = all copies of the original message. If you are the intended recipient, plea= se be advised that the content of this message is subject to access, review= and disclosure by the sender's e-mail System Administrator. </body> </html> --_000_ED08B56256B38842A463A2A0804C5AC0326ACA3ACAsvrcaexch1atg_--

3 6

Re: [ovirt-users] oVirt Neutron integration question
by Andrew Brimer 15 Dec '14

15 Dec '14

This is a multi-part message in MIME format. ------_=_NextPart_001_01D018AB.ADA98816 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable This is the log information that I get when I hit the Test button on New External Provider. =20 =20 /var/log/ovirt-engine/engine.log =20 2014-12-15 20:37:09,865 INFO [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] (ajp--127.0.0.1-8702-8) [5ec3469f] Running command: TestProviderConnectivityCommand internal: false. Entities affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: SystemAction group CREATE_STORAGE_POOL with role type ADMIN 2014-12-15 20:37:09,934 ERROR [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] (ajp--127.0.0.1-8702-8) [5ec3469f] Command org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand throw Vdc Bll exception. With error message VdcBLLException: (Failed with error PROVIDER_FAILURE and code 5050) =20 /var/log/ovirt-engine/server.log =20 2014-12-15 20:49:17,507 WARN [org.apache.http.impl.client.DefaultHttpClient] (ajp--127.0.0.1-8702-8) Authentication error: Unable to respond to any of these challenges: {keystone=3DWww-Authenticate: Keystone uri=3D"http://10.1.2.3:35357"} =20 =20 From: Andrew Brimer=20 Sent: Monday, December 15, 2014 3:02 PM To: Moti Asayag (masayag(a)redhat.com) Cc: users(a)ovirt.org Subject: oVirt Neutron integration question =20 Hi Moti, =20 I am progressing from the Neutron appliance to Neutron on bare metal and have some questions. I currently have a Fedora 20 blade for the RDO PackStack (Icehouse) that will become my Neutron node. =20 Are you able to provide the PackStack answers file and any other configuration details that went into the creation of the appliance?=20 =20 Thanks very much for any help that you could provide to this effort. =20 Kind Regards, =20 Andrew Brimer ------_=_NextPart_001_01D018AB.ADA98816 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 = (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>This is the log information that I get when I = hit the Test button on New External Provider.<o:p></o:p><o:p> </o:p><o:p> </o:p>/var/log/ovirt-engine/engine.log<o:p></o:p></span= ><o:p> </o:p>2014-12-15 20:37:09,865 = INFO  = [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] = (ajp--127.0.0.1-8702-8) [5ec3469f] Running command: = TestProviderConnectivityCommand internal: false. Entities affected = :  ID: aaa00000-0000-0000-0000-123456789aaa Type: SystemAction = group CREATE_STORAGE_POOL with role type ADMIN<o:p></o:p>2014-12-15 20:37:09,934 = ERROR = [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] = (ajp--127.0.0.1-8702-8) [5ec3469f] Command = org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand throw = Vdc Bll exception. With error message VdcBLLException: (Failed with = error PROVIDER_FAILURE and code 5050)<o:p></o:p><o:p> </o:p>/var/log/ovirt-engine/server.log<o:p></o:p></span= ><o:p> </o:p>2014-12-15 20:49:17,507 = WARN  [org.apache.http.impl.client.DefaultHttpClient] = (ajp--127.0.0.1-8702-8) Authentication error: Unable to respond to any = of these challenges: {keystone=3DWww-Authenticate: Keystone = uri=3D"http://10.1.2.3:35357"}<o:p></o:p><o:p> </o:p><o:p> </o:p><div><div = style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in = 0in 0in'>From:= = Andrew Brimer Sent: Monday, December 15, 2014 3:02 = PM To: Moti Asayag (masayag(a)redhat.com) Cc: = users(a)ovirt.org Subject: oVirt Neutron integration = question<o:p></o:p></div></div><o:p> </o:p>Hi = Moti,<o:p></o:p><o:p> </o:p>I am progressing from the Neutron appliance to Neutron = on bare metal and have some questions. I currently have a Fedora 20 = blade for the RDO PackStack (Icehouse) that will become my Neutron = node.<o:p></o:p><o:p> </o:p>Are you able to provide the PackStack answers file and = any other configuration details that went into the creation of the = appliance? <o:p></o:p><o:p> </o:p>Thanks very much for any help that you could provide = to this effort.<o:p></o:p><o:p> </o:p>Kind = Regards,<o:p></o:p><o:p> </o:p>Andrew Brimer<o:p></o:p></div></body></html> ------_=_NextPart_001_01D018AB.ADA98816--

2 2

oVirt Neutron integration question
by Andrew Brimer 15 Dec '14

15 Dec '14

This is a multi-part message in MIME format. ------_=_NextPart_001_01D018A2.0D0742A8 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Moti, =20 I am progressing from the Neutron appliance to Neutron on bare metal and have some questions. I currently have a Fedora 20 blade for the RDO PackStack (Icehouse) that will become my Neutron node. =20 Are you able to provide the PackStack answers file and any other configuration details that went into the creation of the appliance?=20 =20 Thanks very much for any help that you could provide to this effort. =20 Kind Regards, =20 Andrew Brimer ------_=_NextPart_001_01D018A2.0D0742A8 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 14 = (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>Hi = Moti,<o:p></o:p><o:p> </o:p>I am progressing from the Neutron appliance to Neutron = on bare metal and have some questions. I currently have a Fedora 20 = blade for the RDO PackStack (Icehouse) that will become my Neutron = node.<o:p></o:p><o:p> </o:p>Are you able to provide the PackStack answers file and = any other configuration details that went into the creation of the = appliance? <o:p></o:p><o:p> </o:p>Thanks very much for any help that you could provide = to this effort.<o:p></o:p><o:p> </o:p>Kind = Regards,<o:p></o:p><o:p> </o:p>Andrew Brimer<o:p></o:p></div></body></html> ------_=_NextPart_001_01D018A2.0D0742A8--

2 1

Import existing Gluster into Ovirt
by John Gardeniers 15 Dec '14

15 Dec '14

While pondering the question of importing an existing Gluster into Ovirt I came across http://www.ovirt.org/Features/Gluster_Import_Existing_Cluster. One rather important question not explicitly addressed in that article is - can the import be safely done while the Gluster installation is live and hosting files? That article is about Ovirt 3.2, is it safe to assume the same procedure holds true for recent versions? regards, John

3 3

Fwd: bash: ./autogen.sh: No such file or directory
by Yeela Kaplan 15 Dec '14

15 Dec '14

----- Forwarded Message ----- From: "Yeela Kaplan" <ykaplan(a)redhat.com> To: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> Sent: Monday, December 15, 2014 8:03:03 PM Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory ----- Original Message ----- > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > To: "Yeela Kaplan" <ykaplan(a)redhat.com> > Sent: Monday, December 15, 2014 6:35:49 PM > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory > > Yeela, > > [root@localhost vdsm]# cat /etc/redhat-release > CentOS Linux release 7.0.1406 (Core) > > I don't sure I'm understand your point. > Please be more clear. > > Should I do only: > yum install make autoconf automake pyflakes logrotate gcc python-pep8 > libvirt-python python-devel \ > python-nose rpm-build sanlock-python genisoimage python-ordereddict > python-pthreading libselinux-python\ > python-ethtool m2crypto python-dmidecode python-netaddr python-inotify > python-argparse git \ > python-cpopen bridge-utils libguestfs-tools-c pyparted openssl libnl3 > libtool gettext-devel python-ioprocess \ > policycoreutils-python python-simplejson > or also to do: > > yum install http://download.fedoraproject.org/pub/epel/6/i386/epel- > release-6-8.noarch.rpm > yum install http://danken.fedorapeople.org/python-pep8-1.4.5-2.el6. > noarch.rpm > You need the epel repo for el7. just look in google for instructions to install it. for example: http://www.cyberciti.biz/faq/installing-rhel-epel-repo-on-centos-redhat-7-x/ and then you can install all of the above packages, but you need the repo first so you can fetch them. > Regards, > Ilan. > > > On Mon, Dec 15, 2014 at 6:21 PM, Yeela Kaplan <ykaplan(a)redhat.com> wrote: > > > > You need the same packages just for EL7 > > > > ----- Original Message ----- > > > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > > > To: "Yeela Kaplan" <ykaplan(a)redhat.com> > > > Cc: "Yedidyah Bar David" <didi(a)redhat.com>, "users" <users(a)ovirt.org> > > > Sent: Monday, December 15, 2014 6:00:47 PM > > > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory > > > > > > Are you sure??? > > > Because in instruction is written: > > > "Fedora and Red Hat *Enterprise Linux 6 *users must verify the following > > > packages are installed before attempting to build:" > > > > > > As far as I understand I EL7 not EL6. if you still think I have to do the > > > requested command line so should I have to do the previous command lines > > of > > > EL6 such as: > > > > > > yum install > > > > > http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.r… > > > yum install > > > http://danken.fedorapeople.org/python-pep8-1.4.5-2.el6.noarch.rpm > > > Am I wrong? > > > > > > Regards, > > > Ilan. > > > > > > On Mon, Dec 15, 2014 at 5:52 PM, Yeela Kaplan <ykaplan(a)redhat.com> > > wrote: > > > > > > > > yum install make autoconf automake pyflakes logrotate gcc python-pep8 > > > > libvirt-python python-devel \ > > > > python-nose rpm-build sanlock-python genisoimage python-ordereddict > > > > python-pthreading libselinux-python\ > > > > python-ethtool m2crypto python-dmidecode python-netaddr python-inotify > > > > python-argparse git \ > > > > python-cpopen bridge-utils libguestfs-tools-c pyparted openssl libnl3 > > > > libtool gettext-devel python-ioprocess \ > > > > policycoreutils-python python-simplejson > > > > > > > > ----- Original Message ----- > > > > > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > > > > > To: "Yedidyah Bar David" <didi(a)redhat.com> > > > > > Cc: "Yeela Kaplan" <ykaplan(a)redhat.com> > > > > > Sent: Monday, December 15, 2014 5:39:13 PM > > > > > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or > > directory > > > > > > > > > > [root@localhost Desktop]# pwd > > > > > /home/bih016/Desktop > > > > > [root@localhost Desktop]# cd vdsm > > > > > [root@localhost vdsm]# ./autogen.sh --system > > > > > ./autogen.sh: line 3: autoreconf: command not found > > > > > Running ./configure with --prefix=/usr --sysconfdir=/etc > > > > > --localstatedir=/var --libdir=/usr/lib64 > > > > > ./autogen.sh: line 26: ./configure: No such file or directory > > > > > Regards, > > > > > Ilan. > > > > > > > > > > On Mon, Dec 15, 2014 at 5:35 PM, Yedidyah Bar David <didi(a)redhat.com > > > > > > > wrote: > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > > > > > > > To: "Yeela Kaplan" <ykaplan(a)redhat.com>, didi(a)redhat.com > > > > > > > Sent: Monday, December 15, 2014 5:31:12 PM > > > > > > > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or > > > > directory > > > > > > > > > > > > > > On Mon, Dec 15, 2014 at 5:29 PM, Ilan Hirsfeld < > > > > ilan.hirsfeld(a)gmail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > The OS is: > > > > > > > > [root@localhost Desktop]# cat /etc/redhat-release > > > > > > > > CentOS Linux release 7.0.1406 (Core) > > > > > > > > [root@localhost Desktop]# uname -r > > > > > > > > 3.10.0-123.13.1.el7.x86_64 > > > > > > > > [root@localhost Desktop]# rpm -qa | grep release > > > > > > > > ovirt-release35-001-0.5.rc2.noarch > > > > > > > > centos-release-7-0.1406.el7.centos.2.5.x86_64 > > > > > > > > > > > > > > > > [root@localhost Desktop]# pwd > > > > > > > > /home/bih016/Desktop > > > > > > > > > > > > > > > > I follow the instructions on the site > > > > > > http://www.ovirt.org/Vdsm_Developers > > > > > > > > : > > > > > > > > > > > > > > > > * > > > > http://www.ovirt.org/Vdsm_Developers#Installing_the_required_packages > > > > > > > > < > > > > http://www.ovirt.org/Vdsm_Developers#Installing_the_required_packages > > > > > > >* > > > > > > > > > > > > > > > > 1. yum install > > > > > > > > > > > > http://resources.ovirt.org/releases/ovirt-release/ovirt-release35.rpm > > > > > > > > > > > > > > > > 2. rpm -q wget 2> /dev/null || yum install wget > > > > > > > > wget -O /etc/yum.repos.d/glusterfs-epel.repo > > > > > > > > > > > > > > > > > > > > http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/glusterf… > > > > > > > > > > > > > > > > *http://www.ovirt.org/Vdsm_Developers#Getting_the_source > > > > > > > > <http://www.ovirt.org/Vdsm_Developers#Getting_the_source>:* > > > > > > > > git clone http://gerrit.ovirt.org/p/vdsm.git > > > > > > > > > > > > > > > > *http://www.ovirt.org/Vdsm_Developers#Building_a_VDSM_RPM > > > > > > > > <http://www.ovirt.org/Vdsm_Developers#Building_a_VDSM_RPM>:* > > > > > > > > [root@localhost Desktop]# ./autogen.sh --system > > > > > > > > bash: ./autogen.sh: No such file or directory > > > > > > > > > > > > > > > > Regards, > > > > > > > > Ilan. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, Dec 15, 2014 at 5:07 PM, Yeela Kaplan < > > ykaplan(a)redhat.com> > > > > > > wrote: > > > > > > > >> > > > > > > > >> what is the directory you're running it from (pwd)? > > > > > > > >> You should be under vdsm. > > > > > > > > > > > > So you should follow Yeela's advice. > > > > > > > > > > > > > >> Try listing the files and see if the script autogen.sh is > > there. > > > > > > > >> > > > > > > > >> ----- Original Message ----- > > > > > > > >> > From: "Ilan Hirsfeld" <ilan.hirsfeld(a)gmail.com> > > > > > > > >> > To: "users" <users(a)ovirt.org> > > > > > > > >> > Sent: Monday, December 15, 2014 4:54:52 PM > > > > > > > >> > Subject: [ovirt-users] bash: ./autogen.sh: No such file or > > > > directory > > > > > > > >> > > > > > > > > >> > Hi, > > > > > > > >> > I'm trying to do a Building a VDSM RPM and in command line I > > > > type > > > > > > the > > > > > > > >> > following: > > > > > > > >> > ./autogen.sh --system > > > > > > > >> > bash: ./autogen.sh: No such file or directory > > > > > > > >> > Can anybody help what was wrong? > > > > > > > >> > Any help will be blessed. > > > > > > > >> > Regards, > > > > > > > >> > Ilan. > > > > > > > >> > > > > > > > > >> > _______________________________________________ > > > > > > > >> > Users mailing list > > > > > > > >> > Users(a)ovirt.org > > > > > > > >> > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > >> > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > Didi > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

bash: ./autogen.sh: No such file or directory
by Ilan Hirsfeld 15 Dec '14

15 Dec '14

Hi, I'm trying to do a Building a VDSM RPM and in command line I type the following: ./autogen.sh --system bash: ./autogen.sh: No such file or directory Can anybody help what was wrong? Any help will be blessed. Regards, Ilan.

3 2

1. Re: storage offload capability (Paul Jansen)
by Nikolai Sednev 15 Dec '14

15 Dec '14

------=_Part_10347032_1285155864.1418653581057 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Very needed functionality IMHO, even currently partially supported for cloning guest-vms using KVM and NetApp: http://captainkvm.com/2011/11/offload-cloning-from-kvm-to-the-back-end-stor… Thanks in advance. Best regards, Nikolai ____________________ Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: nsednev ----- Original Message ----- From: users-request(a)ovirt.org To: users(a)ovirt.org Sent: Monday, December 15, 2014 3:13:32 PM Subject: Users Digest, Vol 39, Issue 81 Send Users mailing list submissions to users(a)ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)ovirt.org You can reach the person managing the list at users-owner(a)ovirt.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Re: storage offload capability (Paul Jansen) 2. Re: [RFI] Fedora 21 support on oVirt 3.5.z (Gianluca Cecchi) 3. Re: How to update zanata's source text ? (Alexander Wels) 4. Re: [RFI] Fedora 21 support on oVirt 3.5.z (Sandro Bonazzola) 5. Re: [RFI] Fedora 21 support on oVirt 3.5.z (Gianluca Cecchi) 6. Re: [RFI] Fedora 21 support on oVirt 3.5.z (Sandro Bonazzola) 7. Re: [RFI] Fedora 21 support on oVirt 3.5.z (Gianluca Cecchi) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Dec 2014 11:37:24 +0000 (UTC) From: Paul Jansen <vlaero(a)yahoo.com.au> To: Itamar Heim <iheim(a)redhat.com>, users <users(a)ovirt.org> Subject: Re: [ovirt-users] storage offload capability Message-ID: <1885607432.201949.1418643444273.JavaMail.yahoo(a)jws10632.mail.bf1.yahoo.com> Content-Type: text/plain; charset="utf-8" Thanks Itamar.I heard the other day that NFS v4.2 is supposed to contain server side copy, so it's possible that we might see this kind of support in one of more storage domain available to ovirt at some stage perhaps next year (in Fedora at least).Is this something that Gluster will also likely provide in a subsequent release once we have proper gfapi support? I'd be interested to hear if others on the list are clamouring for server side offload support in some form. From: Itamar Heim To: Paul Jansen ; users Sent: Saturday, 13 December 2014, 2:16 Subject: Re: [ovirt-users] storage offload capability On 11/13/2014 06:09 AM, Paul Jansen wrote: > I have an ovirt 3.5 cluster set up with three el7 hosts.? Storage is > provided by two Fedora 20 machines and the connection is via multipath > iscsi. > The performance is quite good.? The Fedora 20 iscsi targets are using > the 'target' (ie: lio) framework, which support the various t.10 scsi > offloads.? Vmware supports a subset of these called VAAI and Microsoft > has a subset called ODX. > Cloning is one if the t.10 extensions that the lio target framework > supports. > I just tried cloning a vm and noticed that during the process there is a > lof of traffic over the iscsi interfaces on the Storage Pool Manager > host and the iscsi target machine. > With proper support for t.10 cloning I shoudn't see any traffic on the > isci links (or very minimal traffic) > Is there some way to enable the storage offload functionality in Ovirt? > If not, is this on the VDSM roadmap?? If support were worked in this > should be able to be applied to FCP connections as well.? The lio target > supports these offloads when acting as a Fiber Channel target also. > > I've asked this sometime back but there hasn't been much in the way of > discussion on this users list or the devel list about this feature. > yes, on the roadmap, tbd yet on when. netapp did a plugin enabling this for their storage array (VSC plugin) I hope the ceph integration will provide this, though that doesn't solve it for other type of storage domains yet. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215/7280fe9d/attach…> ------------------------------ Message: 2 Date: Mon, 15 Dec 2014 13:30:05 +0100 From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> To: Sandro Bonazzola <sbonazzo(a)redhat.com> Cc: "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVirt 3.5.z Message-ID: <CAG2kNCxxvvjZ530jmboBGC4uvUj9+qVa0M_4baNPRiiE0cAnsQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Mon, Dec 15, 2014 at 10:39 AM, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > Hi, > We have proposed Fedora 21 support as oVirt 3.6.0 new feature. > oVirt 3.5.z is now in maintenance phase so no new features should be added. > Supporting Fedora 21 is not just re-building everything on Fedora 21, it > requires changes in several packages. > My question is, is there community interest in having Fedora 21 support > for oVirt 3.5.z while still having Fedora 20 as actively supported > distribution? > > Back in May (see http://lists.ovirt.org/pipermail/users/2014-May/024004.html and following answers) we talked about Fedora Server and that Fedora 21 Server would have been a preview of that... Now that it is out officially, it would be nice to see if oVirt Hypervisor/Engine could become sort of Server Roles, as stated at https://getfedora.org/en/server/ " Server Roles and Rolekit There's no need to set up your server from scratch when you use server roles. Server roles plug into your Fedora Server system, providing a well-integrated service on top of the Fedora Server platform. Deploy and manage these prepared roles simply using the Rolekit tool. " Gianluca -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215/78f95c51/attach…> ------------------------------ Message: 3 Date: Mon, 15 Dec 2014 07:45:41 -0500 From: Alexander Wels <awels(a)redhat.com> To: users(a)ovirt.org Subject: Re: [ovirt-users] How to update zanata's source text ? Message-ID: <3574173.gs5KEaG2Rv@awels> Content-Type: text/plain; charset="us-ascii" On Sunday, December 14, 2014 03:03:56 PM plysan wrote: > Hi, > > When I'm trying to compile ovirt-engine-3.5 branch with pulled zanata > source files, I get webadmin compilation errors. And the error message lead > me to the outdated zanata translation > file: org.ovirt.engine.ui.webadmin.ApplicationMessages > The file has a source text called "{0} (VLAN {1})", but recent commit > b068ec755198c27e65f936809104ba5068cd8fd2 > has changed the text to "(VLAN {0})" > > So is there a way to update the zanata's source text (text on the left) ? > It seems that I don't get any options to update it, I can only update the > target text (text on the right). > > thanks. The zanata source text is generated from default values from the ovirt source code. Einav should know more about exactly how that is done. You should always match the translation to the source and not the other way around. So I am not sure why you are trying to change the source. ------------------------------ Message: 4 Date: Mon, 15 Dec 2014 13:48:16 +0100 From: Sandro Bonazzola <sbonazzo(a)redhat.com> To: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> Cc: "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVirt 3.5.z Message-ID: <548ED890.9040307(a)redhat.com> Content-Type: text/plain; charset=utf-8 Il 15/12/2014 13:30, Gianluca Cecchi ha scritto: > On Mon, Dec 15, 2014 at 10:39 AM, Sandro Bonazzola <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote: > > Hi, > We have proposed Fedora 21 support as oVirt 3.6.0 new feature. > oVirt 3.5.z is now in maintenance phase so no new features should be added. > Supporting Fedora 21 is not just re-building everything on Fedora 21, it requires changes in several packages. > My question is, is there community interest in having Fedora 21 support for oVirt 3.5.z while still having Fedora 20 as actively supported > distribution? > > > Back in May (see http://lists.ovirt.org/pipermail/users/2014-May/024004.html and following answers) we talked about Fedora Server and that Fedora 21 > Server would have been a preview of that... > > Now that it is out officially, it would be nice to see if oVirt Hypervisor/Engine could become sort of Server Roles, as stated at > https://getfedora.org/en/server/ > > " > Server Roles and Rolekit > There's no need to set up your server from scratch when you use server roles. Server roles plug into your Fedora Server system, providing a > well-integrated service on top of the Fedora Server platform. Deploy and manage these prepared roles simply using the Rolekit tool. > " > I suggest to open a RFE in bugzilla for it, but it won't be in 3.5.z. I'm not even sure if we can make it for 3.6. BTW I think it's an interesting RFE. > Gianluca > -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ------------------------------ Message: 5 Date: Mon, 15 Dec 2014 14:10:18 +0100 From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> To: Sandro Bonazzola <sbonazzo(a)redhat.com> Cc: "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVirt 3.5.z Message-ID: <CAG2kNCzvaAQTm7zR3Kn8CsQYi20w5A3jKiCMFje_-s-P=E7eCw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > > I suggest to open a RFE in bugzilla for it, but it won't be in 3.5.z. I'm > not even sure if we can make it for 3.6. > BTW I think it's an interesting RFE. > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community collaboration. > See how it works at redhat.com > Bugzilla created against ovirt-engine-installer and version 4.0: https://bugzilla.redhat.com/show_bug.cgi?id=1174236 Do you think it is better to create another one specifically for oVirt Hypervisor? And in that case against what component? Gianluca -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215/973e004e/attach…> ------------------------------ Message: 6 Date: Mon, 15 Dec 2014 14:12:02 +0100 From: Sandro Bonazzola <sbonazzo(a)redhat.com> To: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> Cc: Fabian Deutsch <fdeutsch(a)redhat.com>, "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVirt 3.5.z Message-ID: <548EDE22.5040603(a)redhat.com> Content-Type: text/plain; charset=utf-8 Il 15/12/2014 14:10, Gianluca Cecchi ha scritto: > On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonazzola <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote: > > > I suggest to open a RFE in bugzilla for it, but it won't be in 3.5.z. I'm not even sure if we can make it for 3.6. > BTW I think it's an interesting RFE. > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community collaboration. > See how it works at redhat.com <http://redhat.com> > > > Bugzilla created against ovirt-engine-installer and version 4.0: > > https://bugzilla.redhat.com/show_bug.cgi?id=1174236 > > Do you think it is better to create another one specifically for oVirt Hypervisor? And in that case against what component? Fabian? > > Gianluca -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ------------------------------ Message: 7 Date: Mon, 15 Dec 2014 14:13:29 +0100 From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> To: Sandro Bonazzola <sbonazzo(a)redhat.com> Cc: Fabian Deutsch <fdeutsch(a)redhat.com>, "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org" <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVirt 3.5.z Message-ID: <CAG2kNCxgC68TcYFJhdRs7_oWJnM4JF7XRekDWU4bz5dnWhmG8g(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Mon, Dec 15, 2014 at 2:12 PM, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: > > Il 15/12/2014 14:10, Gianluca Cecchi ha scritto: > > On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonazzola <sbonazzo(a)redhat.com > <mailto:sbonazzo@redhat.com>> wrote: > > > > > > I suggest to open a RFE in bugzilla for it, but it won't be in > 3.5.z. I'm not even sure if we can make it for 3.6. > > BTW I think it's an interesting RFE. > > > > -- > > Sandro Bonazzola > > Better technology. Faster innovation. Powered by community > collaboration. > > See how it works at redhat.com <http://redhat.com> > > > > > > Bugzilla created against ovirt-engine-installer and version 4.0: > > > > https://bugzilla.redhat.com/show_bug.cgi?id=1174236 > > > > Do you think it is better to create another one specifically for oVirt > Hypervisor? And in that case against what component? > > Fabian? > > > > > Gianluca > > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community collaboration. > See how it works at redhat.com > BTW: I put [RFE] at beginning of subject. I hope it is sufficient to mark it as an enhancement bugzilla entry... Gianluca -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215/870c20b7/attach…> ------------------------------ _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 81 ************************************* ------=_Part_10347032_1285155864.1418653581057 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: georgia,serif; font-size: 12pt; colo= r: #000000"><div>Very needed functionality IMHO, even currently partially s= upported for cloning guest-vms using KVM and NetApp:</div><div><a href=3D"h= ttp://captainkvm.com/2011/11/offload-cloning-from-kvm-to-the-back-end-stora= ge/" data-mce-href=3D"http://captainkvm.com/2011/11/offload-cloning-from-kv= m-to-the-back-end-storage/">http://captainkvm.com/2011/11/offload-cloning-f= rom-kvm-to-the-back-end-storage/</a></div><div> </div><div> </div><di= v> Thanks in advance. <div> </div>Best reg= ards, Nikolai ____________________ Nikolai Sednev Senior Qualit= y Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'an= ana, Israel 43501 <div> </div>Tel:       +972   9= 7692043 Mobile: +972 52 7342734 Email: nsednev(a)redhat.com IRC: ns= ednev </div><div> </div><hr id=3D"zwchr"><div= style=3D"color:#000;font-weight:normal;font-style:normal;text-decoration:n= one;font-family:Helvetica,Arial,sans-serif;font-size:12pt;">From: us= ers-request(a)ovirt.org To: users(a)ovirt.org Sent: Monday,= December 15, 2014 3:13:32 PM Subject: Users Digest, Vol 39, Issu= e 81 <div> </div>Send Users mailing list submissions to  &nbs= p;      users(a)ovirt.org <div> </div>To = subscribe or unsubscribe via the World Wide Web, visit   &nbsp= ;     http://lists.ovirt.org/mailman/listinfo/user= s or, via email, send a message with subject or body 'help' to  =        users-request(a)ovirt.org <div><= br></div>You can reach the person managing the list at   &nbsp= ;     users-owner(a)ovirt.org <div> </div>When= replying, please edit your Subject line so it is more specific than "Re= : Contents of Users digest..." <div> </div> Today's Topics: <di= v> </div>   1. Re:  storage offload capability (Paul Jans= en)    2. Re:  [RFI] Fedora 21 support on oVirt 3.5.z (Gi= anluca Cecchi)    3. Re:  How to update zanata's source t= ext ? (Alexander Wels)    4. Re:  [RFI] Fedora 21 support= on oVirt 3.5.z (Sandro Bonazzola)    5. Re:  [RFI] Fedor= a 21 support on oVirt 3.5.z (Gianluca Cecchi)    6. Re:  = [RFI] Fedora 21 support on oVirt 3.5.z (Sandro Bonazzola)    7= . Re:  [RFI] Fedora 21 support on oVirt 3.5.z (Gianluca Cecchi) <di= v> </div> -----------------------------------------------------------= ----------- <div> </div>Message: 1 Date: Mon, 15 Dec 2014 11:37:24= +0000 (UTC) From: Paul Jansen <vlaero(a)yahoo.com.au> To: Itamar= Heim <iheim(a)redhat.com>, users <users(a)ovirt.org> Subject: R= e: [ovirt-users] storage offload capability Message-ID:   &= nbsp;     <1885607432.201949.1418643444273.Java= Mail.yahoo(a)jws10632.mail.bf1.yahoo.com>     &nbsp= ;    Content-Type: text/plain; charset=3D"utf-8" <div>= </div>Thanks Itamar.I heard the other day that NFS v4.2 is supposed to = contain server side copy, so it's possible that we might see this kind of s= upport in one of more storage domain available to ovirt at some stage perha= ps next year (in Fedora at least).Is this something that Gluster will also = likely provide in a subsequent release once we have proper gfapi support?<b= r>I'd be interested to hear if others on the list are clamouring for server= side offload support in some form. <div> </div>     &= nbsp;From: Itamar Heim  To: Paul Jansen ; users  Sent: Sat= urday, 13 December 2014, 2:16  Subject: Re: [ovirt-users] storage o= ffload capability    On 11/13/2014 06:09 AM, Paul Jansen w= rote: <div> </div> > I have an ovirt 3.5 cluster set up with th= ree el7 hosts.? Storage is > provided by two Fedora 20 machines and t= he connection is via multipath > iscsi. > The performance is qu= ite good.? The Fedora 20 iscsi targets are using > the 'target' (ie: = lio) framework, which support the various t.10 scsi > offloads.? Vmwa= re supports a subset of these called VAAI and Microsoft > has a subse= t called ODX. > Cloning is one if the t.10 extensions that the lio ta= rget framework > supports. > I just tried cloning a vm and noti= ced that during the process there is a > lof of traffic over the iscs= i interfaces on the Storage Pool Manager > host and the iscsi target = machine. > With proper support for t.10 cloning I shoudn't see any tr= affic on the > isci links (or very minimal traffic) > Is there = some way to enable the storage offload functionality in Ovirt? > If n= ot, is this on the VDSM roadmap?? If support were worked in this > sh= ould be able to be applied to FCP connections as well.? The lio target &= gt; supports these offloads when acting as a Fiber Channel target also. = > > I've asked this sometime back but there hasn't been much in th= e way of > discussion on this users list or the devel list about this= feature. > <div> </div>yes, on the roadmap, tbd yet on when. n= etapp did a plugin enabling this for their storage array (VSC plugin)<b= r>I hope the ceph integration will provide this, though that doesn't solve = it for other type of storage domains yet. <div> </div> <div><b= r></div>   -------------- next part -------------- An HTML = attachment was scrubbed... URL: <http://lists.ovirt.org/pipermail/use= rs/attachments/20141215/7280fe9d/attachment-0001.html> <div> </div= >------------------------------ <div> </div>Message: 2 Date: Mon, = 15 Dec 2014 13:30:05 +0100 From: Gianluca Cecchi <gianluca.cecchi@gma= il.com> To: Sandro Bonazzola <sbonazzo(a)redhat.com> Cc: "User= s(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org"   &nbs= p;     <devel(a)ovirt.org> Subject: Re: [ov= irt-users] [RFI] Fedora 21 support on oVirt 3.5.z Message-ID:  &= nbsp;      <CAG2kNCxxvvjZ530jmboBGC4uvUj9+= qVa0M_4baNPRiiE0cAnsQ(a)mail.gmail.com> Content-Type: text/plain; chars= et=3D"utf-8" <div> </div>On Mon, Dec 15, 2014 at 10:39 AM, Sandro Bon= azzola <sbonazzo(a)redhat.com> wrote: > > Hi, > We= have proposed Fedora 21 support as oVirt 3.6.0 new feature. > oVirt = 3.5.z is now in maintenance phase so no new features should be added. &g= t; Supporting Fedora 21 is not just re-building everything on Fedora 21, it= > requires changes in several packages. > My question is, is t= here community interest in having Fedora 21 support > for oVirt 3.5.z= while still having Fedora 20 as actively supported > distribution?<b= r>> > Back in May (see http://lists.ovirt.org/pipermail/users/2= 014-May/024004.html and following answers) we talked about Fedora Server= and that Fedora 21 Server would have been a preview of that... <div>= </div>Now that it is out officially, it would be nice to see if oVirt<b= r>Hypervisor/Engine could become sort of Server Roles, as stated at http= s://getfedora.org/en/server/ <div> </div>" Server Roles and Roleki= t There's no need to set up your server from scratch when you use server= roles. Server roles plug into your Fedora Server system, providing a<br= >well-integrated service on top of the Fedora Server platform. Deploy and<b= r>manage these prepared roles simply using the Rolekit tool. " <div><= br></div>Gianluca -------------- next part -------------- An HTML att= achment was scrubbed... URL: <http://lists.ovirt.org/pipermail/users/= attachments/20141215/78f95c51/attachment-0001.html> <div> </div>--= ---------------------------- <div> </div>Message: 3 Date: Mon, 15 = Dec 2014 07:45:41 -0500 From: Alexander Wels <awels(a)redhat.com><br= >To: users(a)ovirt.org Subject: Re: [ovirt-users] How to update zanata's s= ource text ? Message-ID: <3574173.gs5KEaG2Rv@awels> Content-Typ= e: text/plain; charset=3D"us-ascii" <div> </div>On Sunday, December 1= 4, 2014 03:03:56 PM plysan wrote: > Hi, > > When I'm try= ing to compile ovirt-engine-3.5 branch with pulled zanata > source fi= les, I get webadmin compilation errors. And the error message lead > = me to the outdated zanata translation > file: org.ovirt.engine.ui.web= admin.ApplicationMessages > The file has a source text called "{0} (V= LAN {1})", but recent commit > b068ec755198c27e65f936809104ba5068cd8f= d2 > has changed the text to "(VLAN {0})" > > So is ther= e a way to update the zanata's source text (text on the left) ? > It = seems that I don't get any options to update it, I can only update the &= gt; target text (text on the right). > > thanks. <div> <= /div>The zanata source text is generated from default values from the ovirt= source code. Einav should know more about exactly how that is done. Yo= u should always match the translation to the source and not the other w= ay around. So I am not sure why you are trying to change the source.<br= ><div> </div> ------------------------------ <div> </div>Messag= e: 4 Date: Mon, 15 Dec 2014 13:48:16 +0100 From: Sandro Bonazzola &lt= ;sbonazzo(a)redhat.com> To: Gianluca Cecchi <gianluca.cecchi(a)gmail.c= om> Cc: "Users(a)ovirt.org" <Users(a)ovirt.org>, "devel(a)ovirt.org"<= br>        <devel(a)ovirt.org><= br>Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVirt 3.5.z Mes= sage-ID: <548ED890.9040307(a)redhat.com> Content-Type: text/plain; c= harset=3Dutf-8 <div> </div>Il 15/12/2014 13:30, Gianluca Cecchi ha sc= ritto: > On Mon, Dec 15, 2014 at 10:39 AM, Sandro Bonazzola <sbona= zzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote: > &g= t;     Hi, >     We have proposed Fedora 21 suppo= rt as oVirt 3.6.0 new feature. >     oVirt 3.5.z is now in = maintenance phase so no new features should be added. >    = Supporting Fedora 21 is not just re-building everything on Fedora 21, it r= equires changes in several packages. >     My question is, = is there community interest in having Fedora 21 support for oVirt 3.5.z whi= le still having Fedora 20 as actively supported >     distr= ibution? > > > Back in May (see http://lists.ovirt.org/= pipermail/users/2014-May/024004.html and following answers) we talked about= Fedora Server and that Fedora 21 > Server would have been a preview = of that... > > Now that it is out officially, it would be nice= to see if oVirt Hypervisor/Engine could become sort of Server Roles, as st= ated at > https://getfedora.org/en/server/ > > " &gt= ; Server Roles and Rolekit > There's no need to set up your server fr= om scratch when you use server roles. Server roles plug into your Fedora Se= rver system, providing a > well-integrated service on top of the Fedo= ra Server platform. Deploy and manage these prepared roles simply using the= Rolekit tool. > " > <div> </div>I suggest to open a RFE= in bugzilla for it, but it won't be in 3.5.z. I'm not even sure if we can = make it for 3.6. BTW I think it's an interesting RFE. <div> </div>= > Gianluca > <div> </div> -- Sandro Bonazzola Bet= ter technology. Faster innovation. Powered by community collaboration. S= ee how it works at redhat.com <div> </div> -----------------------= ------- <div> </div>Message: 5 Date: Mon, 15 Dec 2014 14:10:18 +01= 00 From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> To: Sandro= Bonazzola <sbonazzo(a)redhat.com> Cc: "Users(a)ovirt.org" <Users@o= virt.org>, "devel(a)ovirt.org"       &nbs= p; <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora = 21 support on oVirt 3.5.z Message-ID:      &= nbsp;  <CAG2kNCzvaAQTm7zR3Kn8CsQYi20w5A3jKiCMFje_-s-P=3DE7eCw@= mail.gmail.com> Content-Type: text/plain; charset=3D"utf-8" <div><= br></div>On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonazzola <sbonazzo@red= hat.com> wrote: > > > I suggest to open a RFE in bu= gzilla for it, but it won't be in 3.5.z. I'm > not even sure if we ca= n make it for 3.6. > BTW I think it's an interesting RFE. > = > -- > Sandro Bonazzola > Better technology. Faster innovati= on. Powered by community collaboration. > See how it works at redhat.= com > <div> </div>Bugzilla created against ovirt-engine-install= er and version 4.0: <div> </div>https://bugzilla.redhat.com/show_bug.= cgi?id=3D1174236 <div> </div>Do you think it is better to create anot= her one specifically for oVirt Hypervisor? And in that case against what= component? <div> </div>Gianluca -------------- next part --------= ------ An HTML attachment was scrubbed... URL: <http://lists.ovirt= .org/pipermail/users/attachments/20141215/973e004e/attachment-0001.html>= <div> </div>------------------------------ <div> </div>Message= : 6 Date: Mon, 15 Dec 2014 14:12:02 +0100 From: Sandro Bonazzola <= sbonazzo(a)redhat.com> To: Gianluca Cecchi <gianluca.cecchi(a)gmail.co= m> Cc: Fabian Deutsch <fdeutsch(a)redhat.com>, "Users(a)ovirt.org"<= br>        <Users(a)ovirt.org>,=         "devel(a)ovirt.org" <devel= @ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora 21 support on oVi= rt 3.5.z Message-ID: <548EDE22.5040603(a)redhat.com> Content-Type= : text/plain; charset=3Dutf-8 <div> </div>Il 15/12/2014 14:10, Gianlu= ca Cecchi ha scritto: > On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonaz= zola <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote:<= br>> > >     I suggest to open a RFE in bugzilla= for it, but it won't be in 3.5.z. I'm not even sure if we can make it for = 3.6. >     BTW I think it's an interesting RFE. > <br= >>     -- >     Sandro Bonazzola > &nbsp= ;   Better technology. Faster innovation. Powered by community collabo= ration. >     See how it works at redhat.com <http://red= hat.com> > > > Bugzilla created against ovirt-engine= -installer and version 4.0: > > https://bugzilla.redhat.com/sh= ow_bug.cgi?id=3D1174236 > > Do you think it is better to crea= te another one specifically for oVirt Hypervisor? And in that case against = what component? <div> </div>Fabian? <div> </div>> > G= ianluca <div> </div> -- Sandro Bonazzola Better technology.= Faster innovation. Powered by community collaboration. See how it works= at redhat.com <div> </div> ------------------------------ <div= > </div>Message: 7 Date: Mon, 15 Dec 2014 14:13:29 +0100 From: Gia= nluca Cecchi <gianluca.cecchi(a)gmail.com> To: Sandro Bonazzola <= sbonazzo(a)redhat.com> Cc: Fabian Deutsch <fdeutsch(a)redhat.com>, = "Users(a)ovirt.org"         <Us= ers(a)ovirt.org>,        "devel@ov= irt.org" <devel(a)ovirt.org> Subject: Re: [ovirt-users] [RFI] Fedora= 21 support on oVirt 3.5.z Message-ID:      =    <CAG2kNCxgC68TcYFJhdRs7_oWJnM4JF7XRekDWU4bz5dnWhmG8g@m= ail.gmail.com> Content-Type: text/plain; charset=3D"utf-8" <div><b= r></div>On Mon, Dec 15, 2014 at 2:12 PM, Sandro Bonazzola <sbonazzo@redh= at.com> wrote: > > Il 15/12/2014 14:10, Gianluca Cecchi h= a scritto: > > On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonazzola &= lt;sbonazzo(a)redhat.com > <mailto:sbonazzo@redhat.com>> wrote= : > > > > > >     I suggest to open a = RFE in bugzilla for it, but it won't be in > 3.5.z. I'm not even sure= if we can make it for 3.6. > >     BTW I think it's an = interesting RFE. > > > >     -- > > &n= bsp;   Sandro Bonazzola > >     Better technology. = Faster innovation. Powered by community > collaboration. > >=     See how it works at redhat.com <http://redhat.com> = > > > > > > Bugzilla created against ovirt-engine-i= nstaller and version 4.0: > > > > https://bugzilla.redhat= .com/show_bug.cgi?id=3D1174236 > > > > Do you think it is= better to create another one specifically for oVirt > Hypervisor? An= d in that case against what component? > > Fabian? > &= gt; > > > Gianluca > > > -- > Sandro Bo= nazzola > Better technology. Faster innovation. Powered by community = collaboration. > See how it works at redhat.com > <div> <= /div>BTW: I put [RFE] at beginning of subject. I hope it is sufficient to m= ark it as an enhancement bugzilla entry... <div> </div>Gianluca<br= >-------------- next part -------------- An HTML attachment was scrubbed= ... URL: <http://lists.ovirt.org/pipermail/users/attachments/20141215= /870c20b7/attachment.html> <div> </div>---------------------------= --- <div> </div>_______________________________________________ Us= ers mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listi= nfo/users <div> </div> End of Users Digest, Vol 39, Issue 81 **= *********************************** </div><div> </div></div></body></= html> ------=_Part_10347032_1285155864.1418653581057--

2 1

[RFI] Fedora 21 support on oVirt 3.5.z
by Sandro Bonazzola 15 Dec '14

15 Dec '14

Hi, We have proposed Fedora 21 support as oVirt 3.6.0 new feature. oVirt 3.5.z is now in maintenance phase so no new features should be added. Supporting Fedora 21 is not just re-building everything on Fedora 21, it requires changes in several packages. My question is, is there community interest in having Fedora 21 support for oVirt 3.5.z while still having Fedora 20 as actively supported distribution? -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

3 6

storage offload capability
by Paul Jansen 15 Dec '14

15 Dec '14

---1603101515-1922022095-1415876950=:78136 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable I have an ovirt 3.5 cluster set up with three el7 hosts. Storage is provid= ed by two Fedora 20 machines and the connection is via multipath iscsi.=0AT= he performance is quite good. The Fedora 20 iscsi targets are using the 't= arget' (ie: lio) framework, which support the various t.10 scsi offloads. = Vmware supports a subset of these called VAAI and Microsoft has a subset ca= lled ODX.=0ACloning is one if the t.10 extensions that the lio target frame= work supports.=0A=0AI just tried cloning a vm and noticed that during the p= rocess there is a lof of traffic over the iscsi interfaces on the Storage P= ool Manager host and the iscsi target machine.=0AWith proper support for t.= 10 cloning I shoudn't see any traffic on the isci links (or very minimal tr= affic)=0A=0AIs there some way to enable the storage offload functionality i= n Ovirt?=0AIf not, is this on the VDSM roadmap? If support were worked in = this should be able to be applied to FCP connections as well. The lio targ= et supports these offloads when acting as a Fiber Channel target also.=0A= =0A=0AI've asked this sometime back but there hasn't been much in the way o= f discussion on this users list or the devel list about this feature. ---1603101515-1922022095-1415876950=:78136 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"color:#000; background-color:#fff; font-family:He= lveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, Sans-Serif;fo= nt-size:12px"><div>I have an ovirt 3.5 cluster set up with three el7 hosts.=   Storage is provided by two Fedora 20 machines and the connection is = via multipath iscsi.</div><div>The performance is quite good.  The Fed= ora 20 iscsi targets are using the 'target' (ie: lio) framework, which supp= ort the various t.10 scsi offloads.  Vmware supports a subset of these= called VAAI and Microsoft has a subset called ODX.</div><div>Cloning is on= e if the t.10 extensions that the lio target framework supports. </div><= div>I just tried cloning a vm and noticed that during the process there is = a lof of traffic over the iscsi interfaces on the Storage Pool Manager host= and the iscsi target machine.</div><div>With proper support for t.10 cloni= ng I shoudn't see any traffic on the isci links (or very minimal traffic) </div><div style=3D"color: rgb(0, 0, 0); font-size: 12px; font= -family: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-se= rif; background-color: transparent; font-style: normal;">Is there some way = to enable the storage offload functionality in Ovirt?</div><div style=3D"co= lor: rgb(0, 0, 0); font-size: 12px; font-family: HelveticaNeue,Helvetica Ne= ue,Helvetica,Arial,Lucida Grande,sans-serif; background-color: transparent;= font-style: normal;">If not, is this on the VDSM roadmap?  If support= were worked in this should be able to be applied to FCP connections as wel= l.  The lio target supports these offloads when acting as a Fiber Chan= nel target also. </div><div style=3D"color: rgb(0, 0, 0); font-size: 12p= x; font-family: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,= sans-serif; background-color: transparent; font-style: normal;"> </div><= div style=3D"color: rgb(0, 0, 0); font-size: 12px; font-family: HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-serif; bac= kground-color: transparent; font-style: normal;">I've asked this sometime b= ack but there hasn't been much in the way of discussion on this users list = or the devel list about this feature. </div><div> </div></div></body>= </html> ---1603101515-1922022095-1415876950=:78136--

2 2