- Users - oVirt List Archives

Upgrade to Ovirt 3.5.0 Authentication Fails to IPA
by Ondra Machacek 22 Nov '14

22 Nov '14

Hi, just tried it too. I was not successfull to reproduce, but the problem is that the domain part of LDAPSecurityAuthentication is uppercase as Cameron wrote. In 3.4 it is OK when it's upper case - everything works OK, but in 3.5 it's not. I checked differences and something like this would be enough, Yair? diff --git a/backend/manager/modules/utils/src/main/java/org/ovirt/engine/core/utils/extensionsmgr/EngineExtensionsManager.java b/backend/manager/modules/utils/src/main/java/org/ovirt/engine/core/utils/extensionsmgr/EngineExte index f5ab28d..ccaf04a 100644 --- a/backend/manager/modules/utils/src/main/java/org/ovirt/engine/core/utils/extensionsmgr/EngineExtensionsManager.java +++ b/backend/manager/modules/utils/src/main/java/org/ovirt/engine/core/utils/extensionsmgr/EngineExtensionsManager.java @@ -240,7 +240,7 @@ public class EngineExtensionsManager extends ExtensionsManager { ) ); } - if (nameValue[0].equals(domain)) { + if (nameValue[0].equalsIgnoreCase(domain)) { result = nameValue[1]; break; } Ondra ----- Original Message ----- > From: "Alon Bar-Lev" <alonbl at redhat.com> > To: "Cameron Christensen" <cameron.christensen at uk2group.com>, "Yair Zaslavsky" <yzaslavs at redhat.com> > Cc: users at ovirt.org > Sent: Monday, November 17, 2014 11:48:15 PM > Subject: Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to IPA > > > > ----- Original Message ----- > > From: "Cameron Christensen" <cameron.christensen at uk2group.com> > > To: "Alon Bar-Lev" <alonbl at redhat.com> > > Cc: users at ovirt.org > > Sent: Monday, November 17, 2014 11:43:34 PM > > Subject: Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to > > IPA > > > > > > > > On Mon, 2014-11-17 at 14:39 -0500, Alon Bar-Lev wrote: > > > > > > ----- Original Message ----- > > > > From: "Cameron Christensen" <cameron.christensen at uk2group.com> > > > > To: users at ovirt.org > > > > Sent: Friday, November 14, 2014 5:39:54 PM > > > > Subject: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to > > > > IPA > > > > > > > > Hello, > > > > > > > > I upgraded to ovirt 3.5.0 and can no longer authenticate to IPA. > > > > Starting up ovrit-engine the extension manager fails to properly load > > > > the service that handles Kerberos/LDAP. > > > > > > This is probably a bug, can you please execute the following and paste > > > result: > > > > > > # PGPASSWORD="@PASSWORD@" psql -U engine -d engine -c "select * from > > > vdc_options where option_name='LDAPSecurityAuthentication'" > > > > > > > option_id | option_name | option_value | version > > -----------+----------------------------+-------------------+--------- > > 165 | LDAPSecurityAuthentication | example.org:GSSAPI | general > > > > I replaced my domain name with 'example.org' > > > > I thought it will be empty... and it contains valid value. Yair? No, this is fine actually. > > Any I truly suggest you try out the new provider... Much easier to resolve > any issue, current and future, including easier to debug. > > Alon >

2 1

Jumbo Frames
by Phil Daws 22 Nov '14

22 Nov '14

Hello: am really enjoying oVirt but have now hit an issue with iSCSI. As there is only one NIC in the host I have had to enable an MTU of 9000 on ovirtmgmt. Then have vNIC profiles on that interface which are using a custom hook for Openvswitch. I have created a specific vLAN for iSCSI traffic and on the initiator and targets have set their respective interface MTUs to be 9000. When I connect to a LUN it is timing out straight away with a 1011 error. If I drop the MTU back to 1500 all works okay. This is all fine on my other KVM, non-oVirt, system so am wondering if I have missed a step ? Thanks, Phil

5 11

3.5 live merge findings and mysteries [was Re: Simple way to activate live merge in FC20 cluster]
by Gianluca Cecchi 21 Nov '14

21 Nov '14

So the official statement is this one at: http://www.ovirt.org/OVirt_3.5_Release_Notes Live Merge If an image has one or more snapshots, oVirt 3.5's merge command will combine the data of one volume into another. Live merges can be performed with data is pulled from one snapshot into another snapshot. The engine can merge multiple disks at the same time and each merge can independently fail or succeed in each operation. I think we should remove the part above, or at least have some of the developers to better clarify it. The feature in my opinion is very important and crucial for oVirt/RHEV because it is able to almost-fill the gap with VMware, especially in development environments, where having flexibility on snapshots management is very important and could be a starting point to have greater user base familiarize with the product and adopt it. So these are my findings and all combinations and none of them was able to provide live merge.... Could anyone tell me where I'm failing? Or correct release notes? 1) Environment with All-In-One F20 installing oVirt AIO on F20 automatically gives the virt-preview repo through the ovirt-3.5-dependencies.repo file, but only for libvirt* packages: the same server is the engine and the hypervisor [root@tekkaman qemu]# rpm -q libvirt libvirt-1.2.9.1-1.fc20.x86_64 [root@tekkaman qemu]# vdsClient -s 0 getVdsCaps | grep -i merge liveMerge = 'true' but [root@tekkaman qemu]# rpm -q qemu qemu-1.6.2-10.fc20.x86_64 So that tryng live merge it initially start but you get this in vdsm.log: libvirtError: unsupported configuration: active commit not supported with this QEMU binary 2) Another seaparate environment with a dedicated 3.5 engine f20 engine and 4 test cases tried a) ovirt node installed and put in a dedicated cluster latest available seems ovirt-node-iso-3.5.0.ovirt35.20140912.el6.iso from 3.5 rc test days At the end of oVirt Node install and activation in engine: [root@ovnode01 ~]# vdsClient -s 0 getVdsCaps | grep -i merge liveMerge = 'false' [root@ovnode01 ~]# rpm -qa libvirt* qemu* libvirt-0.10.2-29.el6_5.12.x86_64 libvirt-lock-sanlock-0.10.2-29.el6_5.12.x86_64 libvirt-python-0.10.2-29.el6_5.12.x86_64 qemu-kvm-tools-0.12.1.2-2.415.el6_5.14.x86_64 qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64 libvirt-client-0.10.2-29.el6_5.12.x86_64 qemu-img-rhev-0.12.1.2-2.415.el6_5.14.x86_64 b) f20 + latest updates host installed as OS and then installed from webadmin in another cluster virt-preview on host it is not enabled so that libvirt/qemu are not ready [root@ovnode02 network-scripts]# vdsClient -s 0 getVdsCaps | grep -i merge liveMerge = 'false' [root@ovnode02 network-scripts]# rpm -qa libvirt* qemu* libvirt-daemon-1.1.3.6-2.fc20.x86_64 libvirt-python-1.1.3.6-2.fc20.x86_64 libvirt-daemon-config-nwfilter-1.1.3.6-2.fc20.x86_64 qemu-kvm-1.6.2-10.fc20.x86_64 qemu-common-1.6.2-10.fc20.x86_64 libvirt-client-1.1.3.6-2.fc20.x86_64 libvirt-daemon-driver-network-1.1.3.6-2.fc20.x86_64 libvirt-daemon-driver-nwfilter-1.1.3.6-2.fc20.x86_64 libvirt-daemon-driver-interface-1.1.3.6-2.fc20.x86_64 libvirt-daemon-driver-nodedev-1.1.3.6-2.fc20.x86_64 libvirt-daemon-driver-secret-1.1.3.6-2.fc20.x86_64 qemu-system-x86-1.6.2-10.fc20.x86_64 libvirt-daemon-kvm-1.1.3.6-2.fc20.x86_64 qemu-kvm-tools-1.6.2-10.fc20.x86_64 qemu-img-1.6.2-10.fc20.x86_64 libvirt-daemon-driver-qemu-1.1.3.6-2.fc20.x86_64 libvirt-daemon-driver-storage-1.1.3.6-2.fc20.x86_64 libvirt-lock-sanlock-1.1.3.6-2.fc20.x86_64 c) CentOS 6.6 host + latest updates installed as OS and then installed from webadmin in another cluster [root@ovnode03 ~]# vdsClient -s 0 getVdsCaps | grep -i merge liveMerge = 'false' [root@ovnode03 ~]# rpm -qa libvirt* qemu* libvirt-python-0.10.2-46.el6_6.2.x86_64 qemu-kvm-rhev-tools-0.12.1.2-2.415.el6_5.14.x86_64 qemu-img-rhev-0.12.1.2-2.415.el6_5.14.x86_64 libvirt-client-0.10.2-46.el6_6.2.x86_64 libvirt-0.10.2-46.el6_6.2.x86_64 qemu-kvm-rhev-0.12.1.2-2.415.el6_5.14.x86_64 libvirt-lock-sanlock-0.10.2-46.el6_6.2.x86_64 d) CentOS 7.0 host + latest updates installed as OS and then installed from webadmin in another cluster [root@ovnode04 ~]# vdsClient -s 0 getVdsCaps | grep -i merge liveMerge = 'false' [root@ovnode04 ~]# rpm -qa qemu* libvirt* qemu-img-rhev-1.5.3-60.el7_0.2.x86_64 libvirt-daemon-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-storage-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-nodedev-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-kvm-1.1.1-29.el7_0.3.x86_64 qemu-kvm-tools-rhev-1.5.3-60.el7_0.2.x86_64 qemu-kvm-common-rhev-1.5.3-60.el7_0.2.x86_64 libvirt-client-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-nwfilter-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-interface-1.1.1-29.el7_0.3.x86_64 libvirt-lock-sanlock-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-config-nwfilter-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-network-1.1.1-29.el7_0.3.x86_64 qemu-kvm-rhev-1.5.3-60.el7_0.2.x86_64 libvirt-python-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-secret-1.1.1-29.el7_0.3.x86_64 libvirt-daemon-driver-qemu-1.1.1-29.el7_0.3.x86_64 Thanks in advance, Gianluca

1 0

Possible python api bug on api.clusters.list
by Amedeo Salvati 21 Nov '14

21 Nov '14

--_=__=_XaM3_.1416562632.2A.744181.42.22667.52.42.007.1042646237 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable =0A Hello,=0A before opening a new bug, I'm asking here if somebody c= ould let me know if this is a bug or there are other ways to obtain clust= ers list...=0A on python script I retrieve cluster list by using:=0A = clulist =3D api.clusters.list( "datacenter=3D" + "PROD" )=0A but this q= uery on python script will be *automatically* expandend on something like= evething datacenter containg word PROD -> *PROD*, and on our env there a= re either NO_PROD datacenter and PROD datacenter, and this cause that clu= list object contains every clusters on both datacenter.=0A Instead ovir= t-shell works fine and returns only clusters filtered by datacenter-ident= ifier parameter.=0A To better understand this is snippet of python code= :=0A >>> clulist =3D api.clusters.list( "datacenter=3D" + "PROD" )=0A = >>>=0A >>>=0A >>>=0A >>> for clu in clulist:=0A ... print "F= ound cluster " + clu.get_name()=0A ...=0A Found cluster NO_PROD = <-------- THIS CLUSTER IS ON NO_PROD DATACENTER=0A Found cluster PRO= D=0A >>>=0A ovirt-shell snippet that works fine:=0A [oVirt shell (c= onnected)]# list clusters --datacenter-identifier PROD=0A id : = 168c0d5e-8f12-4377-aabf-604adfd36b2b=0A name : PROD=0A [oVirt s= hell (connected)]# list clusters --datacenter-identifier NO_PROD=0A id = : a092c9fc-0f5f-471e-8bca-b3828255aa5a=0A name : NO_PROD=0A= [oVirt shell (connected)]#=0A Is this a bug? Can I open a new bug on= bugzilla?=0A Best regards=0A Amedeo Salvati=0A --_=__=_XaM3_.1416562632.2A.744181.42.22667.52.42.007.1042646237 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable =0A<div class=3D"xam_msg_class">=0AHello, bef= ore opening a new bug, I'm asking here if somebody could let me know if t= his is a bug or there are other ways to obtain clusters list... on python script I retrieve cluster list by using: clulist =3D= api.clusters.list( "datacenter=3D" + "PROD" ) <= br />but this query on python script will be *automatically* expandend on= something like evething datacenter containg word PROD -> *PROD*, and = on our env there are either NO_PROD datacenter and PROD datacenter, and t= his cause that clulist object contains every clusters on both datacenter.= Instead ovirt-shell works fine and returns only clusters filt= ered by datacenter-identifier parameter. To better understand = this is snippet of python code: >>> clulist =3D api.c= lusters.list( "datacenter=3D" + "PROD" ) >&gt= ;> >>> >>> >>> for clu in= clulist: ...=C2=A0=C2=A0=C2=A0=C2=A0 print "Found cluster &quo= t; + clu.get_name() ... Found cluster NO_PROD=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 <-------- THIS CLUSTER IS ON NO_PROD DA= TACENTER Found cluster PROD >>> ovirt-shell= snippet that works fine: [oVirt shell (connected)]# list clus= ters --datacenter-identifier PROD id=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0 : 168c0d5e-8f12-4377-aabf-604adfd36b2b name=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : PROD [oVirt shell (connect= ed)]# list clusters --datacenter-identifier NO_PROD id=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : a092c9fc-0f5f-471e-8bca-b382825= 5aa5a name=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : NO_PROD = [oVirt shell (connected)]# Is this a bug? Can I open a new bug= on bugzilla? Best regards Amedeo Salvati=0A</div>= =0A --_=__=_XaM3_.1416562632.2A.744181.42.22667.52.42.007.1042646237--

2 1

Hosted-Engine Resource Upgrade Method
by Steve Atkinson 21 Nov '14

21 Nov '14

I was wondering what the recommended method is for adding RAM/CPUs etc. to the VM that runs the hosted-engine. If I attempt this from the manager, the response is "Cannot Edit: This VM is not managed by the engine" and I don't readily see a way to make changes to the VMs config from outside of the engine. vdsClient does not show that VM as running either. Thanks -Steve A

2 1

Node upgrade issue
by yao xu 21 Nov '14

21 Nov '14

Hi everyone ! I am looking something about ovirt node upgrade . we are using a old version of ovirt node 3.1. Also I test ovirt node 3.5 . Somethings is puzzling me . 1, In ovirt node 3.1 , it seemed I can't upgrade ovirt node ,because of Hostvg's existence. In Hostvg , something like ssh keys are stored here, I know this is important . Is it possible to let the node inherit these things ? so that I can upgrade the node without remove things in hostvg . 2, I made a ovirt-node-iso 3.5 version myself . But when I try to install it , it fails because the issue of selinux . In shell mode , type "localectl" ,it shows this . after setenforce 0 , localectl will work well . -

2 1

Re: [ovirt-users] 答复: Engine is still unreachable
by Coffee Chou 21 Nov '14

21 Nov '14

Hi, Sandvik I have read the engine.log, it shows: Cannot find a valid baseurl for repo: base can you show me your repo? 2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: > Hi, > > I'm sorry I forgot, here's the attachement. > > On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin < > agustinsandvik(a)gmail.com> wrote: > >> Hi, >> >> I'm sorry I forgot, here's the attachement. >> >> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com> >> wrote: >> >>> Hi, Sandvik >>> maybe you forgot to attach your log~ that's >>> ovirt-hosted-engine-setup, so you can also attach your setup log:-) >>> >>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: >>> >>>> Hi users, >>>> >>>> Chou, here's my I already tried your suggestion right now, but it still >>>> failed, here's my engine.log and vdsm.log. and one more thing, since the >>>> time that I started the installation of ovirt-hosted-engine setup, I >>>> starting to have this kind of error message on my /var/log/message. >>>> >>>> >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: >>>> multipath: error getting device >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >>>> target to table >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: >>>> multipath: error getting device >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >>>> target to table >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> >>>> >>>> Thanks in advance >>>> Sandvik >>>> >>>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com> >>>> wrote: >>>> >>>>> Hi, Sandvik >>>>> it's just a suggestion:-) >>>>> >>>>> i think you can have a try, as i don't know my solution worked or >>>>> not. maybe there are some other people who have encountered this problem >>>>> before and they can give you some advice:-) >>>>> >>>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: >>>>> >>>>>> HI Chou, >>>>>> >>>>>> >>>>>> Thanks, I will try your solution now, and should I resend this email >>>>>> to users(a)ovirt.org? >>>>>> >>>>>> >>>>>> Thanks >>>>>> Sandvik >>>>>> >>>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Hi, Sandvik >>>>>>> and please don't send the email to me only but to user mail >>>>>>> list, so everybody can help you :-) >>>>>>> >>>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com>: >>>>>>> >>>>>>>> Hi, Sandvik >>>>>>>> i can see the ERROR message: Command returned failure code 1 >>>>>>>> during SSH session .... you can try these: >>>>>>>> >>>>>>>> 1. stop firewall on the hosted_engine_1 >>>>>>>> 2. running command: vdsm-tool configure >>>>>>>> >>>>>>>> if it's still failure, please attach your engine.log and >>>>>>>> vdsm.log >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com >>>>>>>> >: >>>>>>>> >>>>>>>>> Hi Chou, >>>>>>>>> >>>>>>>>> >>>>>>>>> I have successfully install the hosted engine, but at the end of >>>>>>>>> the installation I have this kind of error message >>>>>>>>> >>>>>>>>> To continue make a selection from the options below: >>>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>>> (2) Power off and restart the VM >>>>>>>>> (3) Abort setup >>>>>>>>> >>>>>>>>> (1, 2, 3)[1]: >>>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>>>>>> Enter the name of the cluster to which you want to add >>>>>>>>> the host (Default) [Default]: >>>>>>>>> [ INFO ] Waiting for the host to become operational in the >>>>>>>>> engine. This may take several minutes... >>>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check >>>>>>>>> engine and bootstrap installation logs. >>>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager >>>>>>>>> Please shutdown the VM allowing the system to launch it >>>>>>>>> as a monitored service. >>>>>>>>> The system will wait until the VM is down. >>>>>>>>> [ INFO ] Enabling and starting HA services >>>>>>>>> Hosted Engine successfully set up >>>>>>>>> [ INFO ] Stage: Clean up >>>>>>>>> [ INFO ] Generating answer file >>>>>>>>> '/etc/ovirt-hosted-engine/answers.conf' >>>>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has >>>>>>>>> been updated >>>>>>>>> [ INFO ] Stage: Pre-termination >>>>>>>>> [ INFO ] Stage: Termination >>>>>>>>> >>>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status >>>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error >>>>>>>>> while executing action: >>>>>>>>> >>>>>>>>> hosted_engine_1: >>>>>>>>> >>>>>>>>> - Cannot activate Host. Host has no unique id. >>>>>>>>> >>>>>>>>> >>>>>>>>> and when I try to reinstall it on the webadmin, nothing happen it >>>>>>>>> still failed status. >>>>>>>>> >>>>>>>>> I hope you can help me. >>>>>>>>> >>>>>>>>> Please see attach for screenshot. >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks in advance. >>>>>>>>> sandvik >>>>>>>>> >>>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin < >>>>>>>>> agustinsandvik(a)gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Hi guys, >>>>>>>>>> >>>>>>>>>> First of all I want to thank you for replying my email. >>>>>>>>>> @Chou, yes I can access the engine webadmin. >>>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check my >>>>>>>>>> /etc/hosts I have hostname conflict, then the ovirt engine is now >>>>>>>>>> reachable, but there's another error message, it say's invalid certificate. >>>>>>>>>> Is this because of I've put different FQDN during the installation process? >>>>>>>>>> >>>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou < >>>>>>>>>> coffee.zyr(a)gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Hi, Chao >>>>>>>>>>> You may make a mistake, that's not my setup :-) >>>>>>>>>>> But i don't think it's a problem of password. If the >>>>>>>>>>> passwords were not the same, it will throw an ERROR of: >>>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: >>>>>>>>>>> HTTP Status 401 >>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the >>>>>>>>>>> host to cluster None >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ? >>>>>>>>>>> >>>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com>: >>>>>>>>>>> >>>>>>>>>>> Hi, Chou >>>>>>>>>>>> >>>>>>>>>>>> It seems your rhevm is not setup successfully. I >>>>>>>>>>>> suggest you can think about the two possible root cause below: >>>>>>>>>>>> >>>>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured >>>>>>>>>>>> correctly? >>>>>>>>>>>> >>>>>>>>>>>> 2. your password set in hosted-engine –deploy and >>>>>>>>>>>> rhevm-setup is same ? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> If those are not your problem cause, Please provide more log >>>>>>>>>>>> about it. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] >>>>>>>>>>>> *代表 *Coffee Chou >>>>>>>>>>>> *发送时间:* 2014年11月19日 10:08 >>>>>>>>>>>> *收件人:* Sandvik Agustin >>>>>>>>>>>> *抄送:* users(a)ovirt.org >>>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin < >>>>>>>>>>>> agustinsandvik(a)gmail.com>: >>>>>>>>>>>> >>>>>>>>>>>> Hi!, >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this >>>>>>>>>>>> documentation >>>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I have already completed the installation of ovirt engine >>>>>>>>>>>> inside of the vm, when going back to hosted-engine --deploy >>>>>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> (1, 2, 3)[1]: 1 >>>>>>>>>>>> >>>>>>>>>>>> [ ERROR ] Engine is still unreachable >>>>>>>>>>>> >>>>>>>>>>>> Engine health status page is not yet reachable. >>>>>>>>>>>> >>>>>>>>>>>> To continue make a selection from the options below: >>>>>>>>>>>> >>>>>>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>>>>>> >>>>>>>>>>>> (2) Power off and restart the VM >>>>>>>>>>>> >>>>>>>>>>>> (3) Abort setup >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> what should I do? how to fix this? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>> >>>>>>>>>>>> sandvik >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Users mailing list >>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >

2 1

Re: [ovirt-users] Delivery Status Notification (Failure)
by Sandvik Agustin 21 Nov '14

21 Nov '14

> > Hi, > > I'm sorry I forgot, here's the attachement. > > On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin < > agustinsandvik(a)gmail.com> > wrote: > > > Hi, > > > > I'm sorry I forgot, here's the attachement. > > > > On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com> > > wrote: > > > >> Hi, Sandvik > >> maybe you forgot to attach your log~ that's > >> ovirt-hosted-engine-setup, so you can also attach your setup log:-) > >> > >> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: > >> > >>> Hi users, > >>> > >>> Chou, here's my I already tried your suggestion right now, but it still > >>> failed, here's my engine.log and vdsm.log. and one more thing, since > the > >>> time that I started the installation of ovirt-hosted-engine setup, I > >>> starting to have this kind of error message on my /var/log/message. > >>> > >>> > >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: > >>> multipath: error getting device > >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding > >>> target to table > >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: > >>> multipath: error getting device > >>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding > >>> target to table > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't > >>> remove > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't > >>> remove > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't > >>> remove > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > >>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't > >>> remove > >>> > >>> > >>> Thanks in advance > >>> Sandvik > >>> > >>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com> > >>> wrote: > >>> > >>>> Hi, Sandvik > > ----- Message truncated ----- > >

1 0

Re: [ovirt-users] 答复: Engine is still unreachable
by Sandvik Agustin 21 Nov '14

21 Nov '14

Hi, I'm sorry I forgot, here's the attachement. On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com> wrote: > Hi, Sandvik > maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup, > so you can also attach your setup log:-) > > 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: > >> Hi users, >> >> Chou, here's my I already tried your suggestion right now, but it still >> failed, here's my engine.log and vdsm.log. and one more thing, since the >> time that I started the installation of ovirt-hosted-engine setup, I >> starting to have this kind of error message on my /var/log/message. >> >> >> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: >> error getting device >> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >> target to table >> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: >> error getting device >> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >> target to table >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't >> remove >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't >> remove >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't >> remove >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't >> remove >> >> >> Thanks in advance >> Sandvik >> >> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com> >> wrote: >> >>> Hi, Sandvik >>> it's just a suggestion:-) >>> >>> i think you can have a try, as i don't know my solution worked or >>> not. maybe there are some other people who have encountered this problem >>> before and they can give you some advice:-) >>> >>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: >>> >>>> HI Chou, >>>> >>>> >>>> Thanks, I will try your solution now, and should I resend this email to >>>> users(a)ovirt.org? >>>> >>>> >>>> Thanks >>>> Sandvik >>>> >>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com> >>>> wrote: >>>> >>>>> Hi, Sandvik >>>>> and please don't send the email to me only but to user mail list, >>>>> so everybody can help you :-) >>>>> >>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com>: >>>>> >>>>>> Hi, Sandvik >>>>>> i can see the ERROR message: Command returned failure code 1 >>>>>> during SSH session .... you can try these: >>>>>> >>>>>> 1. stop firewall on the hosted_engine_1 >>>>>> 2. running command: vdsm-tool configure >>>>>> >>>>>> if it's still failure, please attach your engine.log and vdsm.log >>>>>> >>>>>> >>>>>> >>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: >>>>>> >>>>>>> Hi Chou, >>>>>>> >>>>>>> >>>>>>> I have successfully install the hosted engine, but at the end of the >>>>>>> installation I have this kind of error message >>>>>>> >>>>>>> To continue make a selection from the options below: >>>>>>> (1) Continue setup - engine installation is complete >>>>>>> (2) Power off and restart the VM >>>>>>> (3) Abort setup >>>>>>> >>>>>>> (1, 2, 3)[1]: >>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>>>> Enter the name of the cluster to which you want to add the >>>>>>> host (Default) [Default]: >>>>>>> [ INFO ] Waiting for the host to become operational in the engine. >>>>>>> This may take several minutes... >>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check >>>>>>> engine and bootstrap installation logs. >>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager >>>>>>> Please shutdown the VM allowing the system to launch it as >>>>>>> a monitored service. >>>>>>> The system will wait until the VM is down. >>>>>>> [ INFO ] Enabling and starting HA services >>>>>>> Hosted Engine successfully set up >>>>>>> [ INFO ] Stage: Clean up >>>>>>> [ INFO ] Generating answer file >>>>>>> '/etc/ovirt-hosted-engine/answers.conf' >>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has >>>>>>> been updated >>>>>>> [ INFO ] Stage: Pre-termination >>>>>>> [ INFO ] Stage: Termination >>>>>>> >>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status >>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error >>>>>>> while executing action: >>>>>>> >>>>>>> hosted_engine_1: >>>>>>> >>>>>>> - Cannot activate Host. Host has no unique id. >>>>>>> >>>>>>> >>>>>>> and when I try to reinstall it on the webadmin, nothing happen it >>>>>>> still failed status. >>>>>>> >>>>>>> I hope you can help me. >>>>>>> >>>>>>> Please see attach for screenshot. >>>>>>> >>>>>>> >>>>>>> Thanks in advance. >>>>>>> sandvik >>>>>>> >>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin < >>>>>>> agustinsandvik(a)gmail.com> wrote: >>>>>>> >>>>>>>> Hi guys, >>>>>>>> >>>>>>>> First of all I want to thank you for replying my email. >>>>>>>> @Chou, yes I can access the engine webadmin. >>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check my >>>>>>>> /etc/hosts I have hostname conflict, then the ovirt engine is now >>>>>>>> reachable, but there's another error message, it say's invalid certificate. >>>>>>>> Is this because of I've put different FQDN during the installation process? >>>>>>>> >>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <coffee.zyr(a)gmail.com >>>>>>>> > wrote: >>>>>>>> >>>>>>>>> Hi, Chao >>>>>>>>> You may make a mistake, that's not my setup :-) >>>>>>>>> But i don't think it's a problem of password. If the passwords >>>>>>>>> were not the same, it will throw an ERROR of: >>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: HTTP >>>>>>>>> Status 401 >>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the >>>>>>>>> host to cluster None >>>>>>>>> >>>>>>>>> >>>>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ? >>>>>>>>> >>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com>: >>>>>>>>> >>>>>>>>> Hi, Chou >>>>>>>>>> >>>>>>>>>> It seems your rhevm is not setup successfully. I suggest >>>>>>>>>> you can think about the two possible root cause below: >>>>>>>>>> >>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured >>>>>>>>>> correctly? >>>>>>>>>> >>>>>>>>>> 2. your password set in hosted-engine –deploy and >>>>>>>>>> rhevm-setup is same ? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> If those are not your problem cause, Please provide more log >>>>>>>>>> about it. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *代表 >>>>>>>>>> *Coffee Chou >>>>>>>>>> *发送时间:* 2014年11月19日 10:08 >>>>>>>>>> *收件人:* Sandvik Agustin >>>>>>>>>> *抄送:* users(a)ovirt.org >>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin < >>>>>>>>>> agustinsandvik(a)gmail.com>: >>>>>>>>>> >>>>>>>>>> Hi!, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this >>>>>>>>>> documentation >>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I have already completed the installation of ovirt engine inside >>>>>>>>>> of the vm, when going back to hosted-engine --deploy terminal >>>>>>>>>> and choosing 1 the hosted-engine --deploy says: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> (1, 2, 3)[1]: 1 >>>>>>>>>> >>>>>>>>>> [ ERROR ] Engine is still unreachable >>>>>>>>>> >>>>>>>>>> Engine health status page is not yet reachable. >>>>>>>>>> >>>>>>>>>> To continue make a selection from the options below: >>>>>>>>>> >>>>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>>>> >>>>>>>>>> (2) Power off and restart the VM >>>>>>>>>> >>>>>>>>>> (3) Abort setup >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> what should I do? how to fix this? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thanks in advance, >>>>>>>>>> >>>>>>>>>> sandvik >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Users mailing list >>>>>>>>>> Users(a)ovirt.org >>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >

1 0

Re: [ovirt-users] 答复: Engine is still unreachable
by Sandvik Agustin 21 Nov '14

21 Nov '14

Hi users, Chou, here's my I already tried your suggestion right now, but it still failed, here's my engine.log and vdsm.log. and one more thing, since the time that I started the installation of ovirt-hosted-engine setup, I starting to have this kind of error message on my /var/log/message. Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove Thanks in advance Sandvik On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com> wrote: > Hi, Sandvik > it's just a suggestion:-) > > i think you can have a try, as i don't know my solution worked or not. > maybe there are some other people who have encountered this problem before > and they can give you some advice:-) > > 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: > >> HI Chou, >> >> >> Thanks, I will try your solution now, and should I resend this email to >> users(a)ovirt.org? >> >> >> Thanks >> Sandvik >> >> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com> >> wrote: >> >>> Hi, Sandvik >>> and please don't send the email to me only but to user mail list, so >>> everybody can help you :-) >>> >>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com>: >>> >>>> Hi, Sandvik >>>> i can see the ERROR message: Command returned failure code 1 during >>>> SSH session .... you can try these: >>>> >>>> 1. stop firewall on the hosted_engine_1 >>>> 2. running command: vdsm-tool configure >>>> >>>> if it's still failure, please attach your engine.log and vdsm.log >>>> >>>> >>>> >>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com>: >>>> >>>>> Hi Chou, >>>>> >>>>> >>>>> I have successfully install the hosted engine, but at the end of the >>>>> installation I have this kind of error message >>>>> >>>>> To continue make a selection from the options below: >>>>> (1) Continue setup - engine installation is complete >>>>> (2) Power off and restart the VM >>>>> (3) Abort setup >>>>> >>>>> (1, 2, 3)[1]: >>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>> Enter the name of the cluster to which you want to add the >>>>> host (Default) [Default]: >>>>> [ INFO ] Waiting for the host to become operational in the engine. >>>>> This may take several minutes... >>>>> [ ERROR ] The VDSM host was found in a failed state. Please check >>>>> engine and bootstrap installation logs. >>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager >>>>> Please shutdown the VM allowing the system to launch it as a >>>>> monitored service. >>>>> The system will wait until the VM is down. >>>>> [ INFO ] Enabling and starting HA services >>>>> Hosted Engine successfully set up >>>>> [ INFO ] Stage: Clean up >>>>> [ INFO ] Generating answer file >>>>> '/etc/ovirt-hosted-engine/answers.conf' >>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been >>>>> updated >>>>> [ INFO ] Stage: Pre-termination >>>>> [ INFO ] Stage: Termination >>>>> >>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status >>>>> failed. I tried to activate it inside the webadmin, but it say's Error >>>>> while executing action: >>>>> >>>>> hosted_engine_1: >>>>> >>>>> - Cannot activate Host. Host has no unique id. >>>>> >>>>> >>>>> and when I try to reinstall it on the webadmin, nothing happen it >>>>> still failed status. >>>>> >>>>> I hope you can help me. >>>>> >>>>> Please see attach for screenshot. >>>>> >>>>> >>>>> Thanks in advance. >>>>> sandvik >>>>> >>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin < >>>>> agustinsandvik(a)gmail.com> wrote: >>>>> >>>>>> Hi guys, >>>>>> >>>>>> First of all I want to thank you for replying my email. >>>>>> @Chou, yes I can access the engine webadmin. >>>>>> @Chao, I've tried the no. 1 option and it worked, when I check my >>>>>> /etc/hosts I have hostname conflict, then the ovirt engine is now >>>>>> reachable, but there's another error message, it say's invalid certificate. >>>>>> Is this because of I've put different FQDN during the installation process? >>>>>> >>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <coffee.zyr(a)gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Hi, Chao >>>>>>> You may make a mistake, that's not my setup :-) >>>>>>> But i don't think it's a problem of password. If the passwords >>>>>>> were not the same, it will throw an ERROR of: >>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: HTTP >>>>>>> Status 401 >>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host >>>>>>> to cluster None >>>>>>> >>>>>>> >>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ? >>>>>>> >>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com>: >>>>>>> >>>>>>> Hi, Chou >>>>>>>> >>>>>>>> It seems your rhevm is not setup successfully. I suggest >>>>>>>> you can think about the two possible root cause below: >>>>>>>> >>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured >>>>>>>> correctly? >>>>>>>> >>>>>>>> 2. your password set in hosted-engine –deploy and >>>>>>>> rhevm-setup is same ? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> If those are not your problem cause, Please provide more log about >>>>>>>> it. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *代表 >>>>>>>> *Coffee Chou >>>>>>>> *发送时间:* 2014年11月19日 10:08 >>>>>>>> *收件人:* Sandvik Agustin >>>>>>>> *抄送:* users(a)ovirt.org >>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Hi, can you access Engine webadmin with this ERROR message? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin < >>>>>>>> agustinsandvik(a)gmail.com>: >>>>>>>> >>>>>>>> Hi!, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> I have install ovirt 3.4 on centos 6.6 following this documentation >>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> I have already completed the installation of ovirt engine inside of >>>>>>>> the vm, when going back to hosted-engine --deploy terminal and >>>>>>>> choosing 1 the hosted-engine --deploy says: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> (1, 2, 3)[1]: 1 >>>>>>>> >>>>>>>> [ ERROR ] Engine is still unreachable >>>>>>>> >>>>>>>> Engine health status page is not yet reachable. >>>>>>>> >>>>>>>> To continue make a selection from the options below: >>>>>>>> >>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>> >>>>>>>> (2) Power off and restart the VM >>>>>>>> >>>>>>>> (3) Abort setup >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> what should I do? how to fix this? >>>>>>>> >>>>>>>> >>>>>>>> Thanks in advance, >>>>>>>> >>>>>>>> sandvik >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users(a)ovirt.org >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >

1 0