- Users - oVirt List Archives

oVirt 3.5 test day 2 results - NUMA
by Martin Perina 30 Jul '14

30 Jul '14

Hi, I tried to test NUMA feature. Unfortunately the feature has no UI yet, so I tested just db content and REST API calls: 1) Two NUMA hosts added to 3.5 cluster with shared NFS storage using webadmin 2) Database: a) Both hosts have is_numa_supported=true, auto_numa_balancing=1 in vds_dynamic table b) Both hosts have 2 records in numa_nodes tables (consistent with numactl info) c) Both hosts have 24 records in numa_node_cpu_map, 12 per numa node (consistent with numactl info) 3) REST API: a) URL /ovirt-engine/api/hosts/{HOST_ID} contains numa related data: <auto_numa_status>enable</auto_numa_status> <numa_supported>true</numa_supported> b) URL /ovirt-engine/api/hosts/{HOST_ID}/numanodes works (consistent with numactl info) c) URL /ovirt-engine/api/hosts/{HOST_ID}/numanodes/{NODE_ID}/statistics works 4) Installed two VMs (one RHEL 6, one RHEL 7), both requires 16GB of RAM, with balloon enabled and 8GB guarantied. 5) Database: a) Both vms have numatune_mode=preferred in vm_static 6) REST API for VM related data: a) URL /ovirt-engine/api/vms/{VM_ID} contains numa related data: <numa_tune_mode>preferred</numa_tune_mode> b) URL /ovirt-engine/api/vms/{VM_ID}/numanodes works, but returns only: <vm_numa_nodes/> 6) VMs migration between hosts worked fine Martin Perina

2 1

oVirt 3.5 test day 2 results
by Greg Sheremeta 30 Jul '14

30 Jul '14

I once again tested 1091863 Accept vlan devices identified by any name Steps to Reproduce: - Change Host to maintenance mode. - Add a vlan with alternative name to the Host: # ip link add dev eth1.myvlan10 link eth1 name eth1.myvlan10 type vlan id 10 - Activate the Host. It works perfectly. Thanks, Greg Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme(a)redhat.com

3 2

broken mirror - ftp.nluug.nl
by Jiri Belka 30 Jul '14

30 Jul '14

Hi, could anybody responsible contact owners of this mirror to repair it? same via http... j. ~~~ # rsync --progress -a -vv --exclude-from=ovirt-3.5-pre.exclude \ rsync://ftp.nluug.nl/ovirt/ovirt-3.5-pre/ ./ 2>&1 | tail rsync: send_files failed to open "/ovirt-3.5-pre/rpm/el6/repodata/ebecd4b94e21b74ab316613e1d7b691b1bbdf94458f2379a360e832ab02aa9ab-filelists.sqlite.bz2" (in ovirt): Permission denied (13) rsync: send_files failed to open "/ovirt-3.5-pre/rpm/el6/repodata/f0b68ae5785cc196d864a69fd412f9ec8b8e55f5e502cebce8763f8d88efee86-primary.xml.gz" (in ovirt): Permission denied (13) rsync: send_files failed to open "/ovirt-3.5-pre/rpm/el6/repodata/f19a6460fde53ec087366afb6dea696d1633dc516d3474e26d47fd32ec3da34d-filelists.xml.gz" (in ovirt): Permission denied (13) rsync: send_files failed to open "/ovirt-3.5-pre/rpm/el6/repodata/f6a676be4d0abe84266175744759247c560f5de70cb410abefdf52ec2f60dcb9-filelists.xml.gz" (in ovirt): Permission denied (13) rsync: send_files failed to open "/ovirt-3.5-pre/rpm/el6/repodata/f71afa837e0bff24395d6a8ba4660613182c2d6eba648504d4f367b793bb8a6a-primary.sqlite.bz2" (in ovirt): Permission denied (13) rsync: send_files failed to open "/ovirt-3.5-pre/rpm/el6/repodata/fd1d726943a4c01da84af9ba56e7abc284e9fda283d4eb959e0835f7ca29eef5-primary.sqlite.bz2" (in ovirt): Permission denied (13) sent 5418 bytes received 86056 bytes 12196.53 bytes/sec total size is 3353996928 speedup is 36666.12 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1505) [generator=3.0.6] ~~~

1 0

ftp.snt.utwente.nl mirror doesn't have ovirt via rsync
by Jiri Belka 30 Jul '14

30 Jul '14

Hi, could anybody responsible contact owners of this mirror and ask them to make oVirt available via rsync? j. ~~~ Welcome to the ftp.snt.utwente.nl archive. This service is provided to you by: Studenten Net Twente (SNT) http://www.snt.utwente.nl/ the University of Twente http://www.utwente.nl/ This system may be used 24 hours a day, 7 days a week. All transfers are logged with your hostname and email address. If you don't like this policy, disconnect now! We are available on: http://ftp.snt.utwente.nl/ ftp://ftp.snt.utwente.nl/ rsync://ftp.snt.utwente.nl/ Sponsors: Quarantainenet BV http://www.quarantainenet.nl Byte http://www.byte.nl Murphy Software B.V. http://www.murphy.nl Virtu Secure Webservices http://www.virtu.nl Utwente Faculty of TNW http://www.tnw.utwente.nl Sjoerd van Groning Daan van de Linde DISCLAIMER: Neither University of Twente nor SNT are liable for any use, storage or transmission of any files stored on this archive. Since much of our archive is mirrored from other servers, we can not check all files for virusinfections. Please proceed with caution. If you have any problems or comments about this archive, please send them via e-mail to ftpcom_at_snt.utwente.nl. Please also let us know if there is something we don't have that you think we should! gentoo-x86-portage Gentoo Linux Portage tree gentoo-portage Gentoo Linux Portage tree gentoo Gentoo Linux Distribution fedora Fedora Linux Distribution mandrake Mandrake Linux Distribution mandrake-iso Mandrake Linux Distribution Iso's debian Debian Linux Distribution debian-archive Debian Linux Distribution Archive debian-ipv6 Debian Linux IPv6 Distribution debian-non-US Debian Linux Non-US Distribution backports Debian Linux Distribution debian-backports Debian Linux Distribution deepin LinuxDeepin Packages deepin-cd LinuxDeepin Release CD Images freebsd FreeBSD Distribution openbsd OpenBSD Distribution netbsd NetBSD Distribution freedos FreeDOS Distribution linux-kernel Linux Kernel Mirror slackware Slackware Linux Distribution suse Suse Linux Distribution cpan Comprehensive Perl Archive Network xfree86 XFree86 apache Apache Webserver archlinux Arch Linux mirror mageia Mageia Project mirror cygwin-ftp cygwin ftp area exim Exim Mailer gnu The GNU Project gnupg GNU Privacy Guard kame KAME Project usagi UniverSAl playGround for Ipv6 kde K Desktop Environment mozilla Mozilla Current Release Only mozilla-current Mozilla Current Release Only mozilla-releases Mozilla Software Releases mutt Mutt E-Mail Client mysql MySQL Database openoffice OpenOffice.org openoffice-extended OpenOffice.org extended data samba Samba rsync Rsync gnoppix Gnoppix ubuntu-releases ISO images of the Ubuntu releases ubuntu-archive Packages in the Ubuntu Archive tex CTAN community mirror for Tex tdf The Document Foundation xbmc Main XBMC File Repository ~~~

1 0

oVirt 3.5 2nd test day report - hosted engine
by Greg Padgett 30 Jul '14

30 Jul '14

Hi all, Today I tested Hosted Engine on iSCSI (setup and operation) on Fedora 20. The first part of setup went smoothly, but there were some hiccups I eventually ran into: - HA services didn't start after setup [1] - HA agent failed without reporting an error [2][3] I also noticed that when an iSCSI target has multiple LUNs, a random (?) one would be chosen by setup. I ended up running setup again with only one LUN available to make sure this didn't cause further errors. After setup of the first host completed, things seemed to be working well. However, after completing 2nd host setup and rebooting the first host, I have errors in both agent.log files. [4] I'll follow up with msivak and jmoskovc to see if these are errors on my part or something I can help troubleshoot. Thanks, Greg [1] https://bugzilla.redhat.com/show_bug.cgi?id=1123285 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1124624 [3] http://gerrit.ovirt.org/#/c/30814/ [4] First host: Error: 'path to storage domain 35ff13aa-7ff1-4add-9869-651267e36921 not found in /rhev/data-center/mnt' - trying to restart agent [followed by agent existing after too many retries] Second host: Exception: Failed to start monitoring domain (sd_uuid=35ff13aa- 7ff1-4add-9869-651267e36921, host_id=2): timeout during domain acquisition

2 1

oVirt 3.5 2 nd test day report(1124458, 1124318, 1124340, 1124346, 1124354, 1124360, 1124363, 1124364)
by Eli Mesika 30 Jul '14

30 Jul '14

Hardware: 2 x VM 2cpu 4GB ram (Fedora 19, CentOS 6.5) Network configuration: Single NIC without bonding / vlans Storage configurations: NFS v3 ISO and data domain * History DB should sync user's first and last name for user usage tables. (BZ 1091687) test result: partly passed Tested Add a user from AD => passed Change user details => passed Delete a user => Not passed opened BZ 1124458 Other Bugs Opened : ------------------------------ 1124318 1124340 1124346 1124354 1124360 1124363 1124364 Thanks Eli Mesika

1 0

oVirt 3.5 2nd test day report
by Idan Shaby 30 Jul '14

30 Jul '14

Hi everyone, I've tested Bug 1072313 - OVIRT35 - [RFE] Allow to edit VM properties that need VM to be down to apply, just mark it as such and apply on VM shutdown: https://bugzilla.redhat.com/show_bug.cgi?id=1072313 and opened these three bugs: Bug 1124432 - Complex info icon tooltip message in "Edit/New Virtual Machine" windows, under the "Host" tab, right before the "Start Running On" section - https://bugzilla.redhat.com/show_bug.cgi?id=1124432 Bug 1124425 - Wrong info icon location in New/Edit Virtual Machine - https://bugzilla.redhat.com/show_bug.cgi?id=1124425 Bug 1124449 - Fields under "Start Running On" in the "Edit Virtual Machine" window should be greyed out when the VM is up - https://bugzilla.redhat.com/show_bug.cgi?id=1124449 Idan

1 0

[QE][ACTION NEEDED] oVirt 3.5.0 RC status
by Sandro Bonazzola 30 Jul '14

30 Jul '14

Hi, We're going to compose oVirt 3.5.0 RC on Mon * 2014-08-04 08:00 UTC*. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2014-08-03 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-08-03 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. The bug tracker [1] shows the following proposed blockers to be reviewed: Bug ID Whiteboard Status Summary 1115152 infra ASSIGNED Cannot edit or create block storage doamin when using jsonrpc 1115044 infra POST Host stuck in "Unassinged" state when using jsonrpc and disconnection from pool failed 1124141 infra ASSIGNED StackOverflowError during fencing operation 1114987 network ASSIGNED Cannot start VM | The host did not satisfy internal filter Network because network(s) are missing. 1122592 node NEW ovirt-node-plugin-vdsm >= 0.2.0 is needed for oVirt 3.5 1124099 storage POST Live Merge: Limit merge operations based on hosts' capabilities Feature freeze is now effective, and branch has been created. All new patches must be backported to 3.5 branch too. Features completed are marked in green on Features Status Table [2] There are still 397 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 349 bugs [4] targeted to 3.5.0. Maintainers / Assignee: - Please check ensure that completed features are marked in green on Features Status Table [2] - Please remember to rebuild your packages before *2014-08-03 15:00* if needed, otherwise nightly snapshot will be taken. - If you find a blocker bug please remember to add it to the tracker [1] - Please fill release notes, the page has been created here [5] - Please review and add test cases to oVirt 3.5 Third Test Day [6] Community: - thanks for having joined the second test day we had yesterday - save the date for third test day scheduled on 2014-08-12! - You're welcome to join us testing next beta release and getting involved in oVirt Quality Assurance[7] [1] http://bugzilla.redhat.com/1073943 [2] http://bit.ly/17qBn6F [3] http://red.ht/1pVEk7H [4] http://red.ht/1rLCJwF [5] http://www.ovirt.org/OVirt_3.5_Release_Notes [6] http://www.ovirt.org/OVirt_3.5_TestDay [7] http://www.ovirt.org/OVirt_Quality_Assurance Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[QE][ACTION NEEDED] oVirt 3.4.4 RC status
by Sandro Bonazzola 30 Jul '14

30 Jul '14

Hi, We're going to start composing oVirt 3.4.4 RC on *2014-09-09 08:00 UTC* from 3.4 branch. Maintainers: - Please be sure that 3.4 snapshot allow to create VMs before *2014-09-08 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-09-08 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. A bug tracker [1] has been opened and shows no open blockers. There are still 14 bugs [2] targeted to 3.4.4. Excluding node and documentation bugs we still have 7 bugs [3] targeted to 3.4.4. Bug ID Whiteboard Status Summary 1124413 infra POST Calendar table is created incorrectly for certain time zones. 1048880 network NEW [vdsm][openstacknet] Migration fails for vNIC using OVS + security groups 1112688 network NEW [Neutron integration] Log collection is missing for Neutron appliance 1001186 network NEW With AIO installer and NetworkManager enabled, the ovirtmgmt bridge is not properly configured 1023481 node ASSIGNED Sane and working default libvirt config 910701 node ASSIGNED Remove persistent-net-naming hack 1097735 node NEW "Reboot" button failed to work in progress_page with serial console to install ovirt-node iso. 969340 node NEW Migrate ovirt-node-installer backend and ovirt-auto-install backend to new code base 753306 node NEW SR-IOV support 988341 node NEW Should not create bond when report an error in configuration process 995321 node NEW remove existing efi entries "oVirt Node Hypervisor" in UEFI menu failed 1059309 sla NEW [events] 'Available memory of host $host (...) under defined threshold...' is logged only once 1111655 storage NEW Disks imported from Export Domain to Data Domain are converted to Preallocated after upgrade from oVirt 3.4.1 to 3.4.2 1070890 virt NEW Run vm with odd number of cores drop libvirt error Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.4.4 should not be released without them fixed. - Please update the target to 3.5.0 or later for bugs that won't be in 3.4.4: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.4 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1118689 [2] http://red.ht/1qwhPXB [3] http://red.ht/1sQDLwg [4] http://www.ovirt.org/OVirt_3.4.4_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.4.4_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[ovirt-devel] oVirt 3.5 beta2 - results
by Piotr Kliczewski 30 Jul '14

30 Jul '14

Hi all, I tested gluster related features: Nagios Integration -> http://www.ovirt.org/Features/Nagios_Integration#HOW_TO I installed Nagios dependencies on f20 which went smoothly but when I did the same for rhel6 I noticed that I had to install manually additional rpm which was not covered by howto. rrdtool-perl-1.3.8-6.el6.x86_64.rpm During discovery of the Nagios server I got following issue: [root@rhel gluster]# /usr/lib64/nagios/plugins/gluster/discovery.py -c Default -H 192.168.1.9 Failed to execute NRPE command 'discover_volume_list' in host '192.168.1.9' Error : Make sure NPRE server in host '192.168.1.9' is configured to accept requests from Nagios server so I followed http://tecadmin.net/install-nrpe-on-centos-rhel/. Nagios server reported status of the cluster. When I had configured first nagios server I saw: "OK : None of the Volumes in the cluster are in Critical State " but for the second there was: (null). I followed howto and installed oVirt UI plugin but after restart I was not able to see monitoring details tab so I opened: https://bugzilla.redhat.com/show_bug.cgi?id=1124371 Volume performance stats -> http://www.ovirt.org/Features/Gluster_Volume_Performance_Statistics#HOW_TO I reused already existing setup. I enabled stats and added a volume. When checking stats details I saw "could not fetch stats". I wanted to generate some stats so I mount volume previously created using: mount -t nfs 192.168.1.9:/vol1 /media/volume I had to redo it several times do to: mount.nfs: requested NFS version or transport protocol is not supported After several attempts I lost connectivity to the machine. After host recovered I tried to run: mount -o mountproto=tcp -t nfs 192.168.1.9:/vol1 /media/volume but the result was the same. I opened: https://bugzilla.redhat.com/show_bug.cgi?id=1124376 I checked whether gluster still works with jsonrpc. I removed the host that I installed before and added new one using jsonrpc protocol. After the installation I noticed that host was moved to Non-Operation state. In the logs I found: {"jsonrpc": "2.0", "id": "101bf460-6529-42d6-9370-a9629daad628", "error": {"message": "The method does not exist / is not available.", "code": -32601}} I checked what was the reason and there was no apiwrapper.py module so I opened: https://bugzilla.redhat.com/show_bug.cgi?id=1124481 Thanks, Piotr

2 2