- Users - oVirt List Archives

Error creating Disks
by Maurice James 14 Apr '14

14 Apr '14

------=_Part_495_1151800014.1397484037085 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit oVirt Engine Version: 3.4.1-0.0.master.20140412010845.git43746c6.el6 While attempting to create a disk on an NFS storage domain, it fails with the following error in the engine.log 2014-04-14 09:58:12,127 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] (DefaultQuartzScheduler_Worker-72) Failed in HSMGetAllTasksStatusesVDS method 2014-04-14 09:58:12,139 ERROR [org.ovirt.engine.core.bll.SPMAsyncTask] (DefaultQuartzScheduler_Worker-72) BaseAsyncTask::LogEndTaskFailure: Task ee6ce682-bd76-467a-82d2-d227229cb9de (Parent Command AddDisk, Parameters Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended with failure: 2014-04-14 09:58:12,159 ERROR [org.ovirt.engine.core.bll.AddDiskCommand] (org.ovirt.thread.pool-6-thread-9) [483e53d6] Ending command with failure: org.ovirt.engine.core.bll.AddDiskCommand 2014-04-14 09:58:12,212 ERROR [org.ovirt.engine.core.bll.AddImageFromScratchCommand] (org.ovirt.thread.pool-6-thread-9) [ab1e0be] Ending command with failure: org.ovirt.engine.core.bll.AddImageFromScratchCommand ------=_Part_495_1151800014.1397484037085 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: times new roman, new york, times, se= rif; font-size: 12pt; color: #000000"><div><span style=3D"font-family: 'Ari= al Unicode MS', Arial, sans-serif; font-size: small; text-align: -webkit-ce= nter; background-color: #ffffff;" data-mce-style=3D"font-family: 'Arial Uni= code MS', Arial, sans-serif; font-size: small; text-align: -webkit-center; = background-color: #ffffff;">oVirt Engine Version: 3.4.1-0.0.master.20140412= 010845.git43746c6.el6</span></div><div><span style=3D"font-family: 'Arial U= nicode MS', Arial, sans-serif; font-size: small; text-align: -webkit-center= ; background-color: #ffffff;" data-mce-style=3D"font-family: 'Arial Unicode= MS', Arial, sans-serif; font-size: small; text-align: -webkit-center; back= ground-color: #ffffff;"><br></span></div><div><br></div><div>While attempti= ng to create a disk on an NFS storage domain, it fails with the following e= rror in the engine.log</div><div><br></div><div><br></div><div><p style=3D"= margin: 0px;" data-mce-style=3D"margin: 0px;">2014-04-14 09:58:12,127 ERROR= [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSComman= d] (DefaultQuartzScheduler_Worker-72) Failed in HSMGetAllTasksStatusesVDS m= ethod<br>2014-04-14 09:58:12,139 ERROR [org.ovirt.engine.core.bll.SPMAsyncT= ask] (DefaultQuartzScheduler_Worker-72) BaseAsyncTask::LogEndTaskFailure: T= ask ee6ce682-bd76-467a-82d2-d227229cb9de (Parent Command AddDisk, Parameter= s Type org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters) ended w= ith failure:<br>2014-04-14 09:58:12,159 ERROR [org.ovirt.engine.core.bll.Ad= dDiskCommand] (org.ovirt.thread.pool-6-thread-9) [483e53d6] Ending command = with failure: org.ovirt.engine.core.bll.AddDiskCommand<br>2014-04-14 09:58:= 12,212 ERROR [org.ovirt.engine.core.bll.AddImageFromScratchCommand] (org.ov= irt.thread.pool-6-thread-9) [ab1e0be] Ending command with failure: org.ovir= t.engine.core.bll.AddImageFromScratchCommand</p></div><div><br></div><div><= span name=3D"x"></span><div><span style=3D"font-family: 'trebuchet ms', san= s-serif;" data-mce-style=3D"font-family: 'trebuchet ms', sans-serif;"></spa= n></div></div></div></body></html> ------=_Part_495_1151800014.1397484037085--

5 40

Disable auth basic in API
by Jose Manuel Marquez Alhambra 14 Apr '14

14 Apr '14

Hi, I’m testing a connection broker that uses oVirt's API. At the moment, the connection broker doesn’t work because it doesn’t send the basic authentication to oVirt's API. I contacted the developers and they're investigating the error. While they solve the error, I would like to continue testing the connection broker. Is there any way to disable auth basic in oVirt's API? I’m using it in a testing environment (oVirt 3.4 at CentOS 6), so I’m not worried about security risks. Thank you. Regards, Jose

3 3

minimum DNS requirements for /etc/hosts
by Jeremiah Jahn 14 Apr '14

14 Apr '14

So like the nut job I am, I host my dns server on a virtual machine that is now hosted by ovirt, I also have a few gateway machine in there as well for routing traffic between internal networks. With virt-manager, DNS rarely seemed to be an issue. I'd connect to a host IP, and bring up the vm, no problem. Ovirt on the other hand takes forever if dns is down. So i've passed around a /etc/hosts file to resolve any ip address that ovirt might be looking for while dns is out. I'd like to verify at an abstract level, what needs to be in said file, to keep everything from timing out, or just taking forever. name and FQDN of each host name and FQDN of engine host name and FQDN of each storage domain. Is this enough, or are there other places/things the ovirt node and hosts might be trying to resolve? thanks, -jj-

3 2

Re: [ovirt-users] minimum DNS requirements for /etc/hosts
by Jeremiah Jahn 14 Apr '14

14 Apr '14

I only use names for storage, but didn't have entries for the engine yet, So I think ssh was slow since it couldn't do reverse DNS lookups against the engine where my consoles are coming from. Thanks for the input. I wanted to verify before testing since this is a production environment. It seems like even the XMLRPC code must try and do a reverse DNS against the engine as well, not just ssh. Seems like the engine hosts also needs said hosts file as well.. On Mon, Apr 14, 2014 at 8:23 AM, René Koch <rkoch(a)linuxland.at> wrote: > On 04/14/2014 03:08 PM, Jeremiah Jahn wrote: >> >> So like the nut job I am, I host my dns server on a virtual machine >> that is now hosted by ovirt, I also have a few gateway machine in >> there as well for routing traffic between internal networks. With >> virt-manager, DNS rarely seemed to be an issue. I'd connect to a host >> IP, and bring up the vm, no problem. Ovirt on the other hand takes >> forever if dns is down. So i've passed around a /etc/hosts file to >> resolve any ip address that ovirt might be looking for while dns is >> out. I'd like to verify at an abstract level, what needs to be in >> said file, to keep everything from timing out, or just taking forever. >> >> name and FQDN of each host >> name and FQDN of engine host >> name and FQDN of each storage domain. >> >> Is this enough, or are there other places/things the ovirt node and >> hosts might be trying to resolve? > > > Afaik this should be enough. > Just remember that e.g. ssh login will still be slow if the DNS server isn't > reachable as you have to wait until it reaches a timeout. > > My oVirt setup doesn't have any DNS entry - just the hosts and engine in > /etc/hosts. But I don't use DNS names at all only IP addresses... > > > Regards, > René > >> >> thanks, >> -jj- >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >

1 0

Re: [ovirt-users] [Users] hosted engine setup (NFS)
by Sandro Bonazzola 14 Apr '14

14 Apr '14

Il 14/04/2014 14:23, René Koch ha scritto: > > On 04/14/2014 12:39 PM, Sandro Bonazzola wrote: >> Il 03/03/2014 12:39, René Koch ha scritto: >>> Hi, >>> >>> I installed hosted engine and faced an issue with NFS during installation. >>> >>> First of all, I'm using GlusterFS on my storage and ovirt engine doesn't support GlusterFS yet, only NFS. >>> >>> But for NFS I can't use mountprotpo=tcp as hosted-engine --setup doesn't ask for NFS options. >>> >>> So I manually edited the following file: >>> /usr/share/ovirt-hosted-engine-setup/plugins/ovirt-hosted-engine-setup/storage/storage.py >>> >>> and changed opts.append('vers=3'): >>> >>> if domain_type == 'nfs3': >>> fstype = 'nfs' >>> opts.append('vers=3,mountproto=tcp') >>> >>> My question is now: is it possible to ask for NFS options during setup or do you think this can lead into problems? NFS via TCP worked fine for me for >>> one week until I rebooted the host today (did reboot tests last weeks, too which was fine) and can't start hosted engine anymore (see other mail >>> thread), but I think the other issue is not NFS mountproto related. >>> >>> >> >> Well, in hosted-engine setup we don't ask for additional options because we don't store them. >> We just ask for nfs3 or nfs4 because we pass that value as protocol version to VDSM connectStorageServer verb. >> The above change affects only the temporary mount done for validating the domain. > > Thanks a lot for the information. > > Btw, I can mount mit GlusterFS 3.4.2 NFS share now without specifying -o mountproto=tcp. Is upd now possible or is the protocol determined > automatically now? I didn't test if hosted-engine-setup is able to mount GlusterFS NFS shares now without hacks, too - only discovered this new > behavior on my hosts. I don't know > > Slightly off-topic question: > The storage options are stored in /etc/ovirt-hosted-engine/hosted-engine.conf, right? If I want to change the ip address of my storage I simply put > engine into global maintenance mode, change IP in hosted-engine.conf and re-enable hsoted-engine vm again? Or are there more steps required? yes, storage info are stored in /etc/ovirt-hosted-engine/hosted-engine.conf. By the way, if you want to propagate the info on new hypervisors when you run deploy on them, you should also update the answer file in /etc/ovirt-hosted-engine/answers.conf so it will be configured automatically in newly installed hypervisors > > > Regards, > René > >> -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Re: [Users] 2 virtual monitors for Fedora guest
by Gianluca Cecchi 14 Apr '14

14 Apr '14

Some prelimianry tests at my side. oVirt 3.4 on fedora 19 AIO. Datacenter and cluster configured as 3.4 level Some packages on it libvirt-1.1.3.2-1.fc19.x86_64 qemu-kvm-1.6.1-2.fc19.x86_64 vdsm-4.14.6-0.fc19.x86_64 spice-server-0.12.4-3.fc19.x86_64 guest is an updated Fedora 19 system configured based on blank template and OS=Linux and xorg-x11-drv-qxl-0.1.1-3.fc19.x86_64 spice-vdagent-0.14.0-5.fc19.x86_64 Client is an updated Fedora 20 box with virt-viewer-0.6.0-1.fc20.x86_64 If I select the "Single PCI" checkbox in console options of guest and connect from the Fedora 20 client I don't see at all an option in remote-viewer to open a second display and no new display detected in guest. And lspci on guest indeed gives only one video controller. BTW: what is this option for, apart the meaning? If I deselect the "Single PCI" checkbox I get the "Display 2" option in remote-viewer but it is greyed out. No new monitor in "detect displays" of guest. In this last situation I have on host this qem-kvm command line: qemu 16664 1 48 21:04 ? 00:02:42 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name f19 -S -machine pc-1.0,accel=kvm,usb=off -cpu Opteron_G3 -m 2048 -realtime mlock=off -smp 1,maxcpus=160,sockets=160,cores=1,threads=1 -uuid 55d8b95b-f420-4208-a2fb-5f370d05f5d8 -smbios type=1,manufacturer=oVirt,product=oVirt Node,version=19-8,serial=E0E1001E-8C00-002A-6F9A-90E6BAC9F1E1,uuid=55d8b95b-f420-4208-a2fb-5f370d05f5d8 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/f19.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=2014-04-08T19:04:45,driftfix=slew -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -device usb-ccid,id=ccid0 -drive if=none,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive file=/rhev/data-center/mnt/_data_DATA2/b24b94c7-5935-4940-9152-36ecd370ba7c/images/5e99a818-9fd1-47bb-99dc-50bd25374c2f/a2baa1e5-569f-4081-97a7-10ec2a20daab,if=none,id=drive-virtio-disk0,format=raw,serial=5e99a818-9fd1-47bb-99dc-50bd25374c2f,cache=none,werror=stop,rerror=stop,aio=threads -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=29 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:1a:4a:a8:01:55,bus=pci.0,addr=0x3 -chardev spicevmc,id=charsmartcard0,name=smartcard -device ccid-card-passthru,chardev=charsmartcard0,id=smartcard0,bus=ccid0.0 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/55d8b95b-f420-4208-a2fb-5f370d05f5d8.com.redhat.rhevm.vdsm,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/55d8b95b-f420-4208-a2fb-5f370d05f5d8.org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.guest_agent.0 -chardev spicevmc,id=charchannel2,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=3,chardev=charchannel2,id=channel2,name=com.redhat.spice.0 -spice tls-port=5901,addr=0,x509-dir=/etc/pki/vdsm/libvirt-spice,tls-channel=main,tls-channel=display,tls-channel=inputs,tls-channel=cursor,tls-channel=playback,tls-channel=record,tls-channel=smartcard,tls-channel=usbredir,seamless-migration=on -k en-us -device qxl-vga,id=video0,ram_size=67108864,vram_size=33554432,bus=pci.0,addr=0x2 -device qxl,id=video1,ram_size=67108864,vram_size=33554432,bus=pci.0,addr=0x8 -device AC97,id=sound0,bus=pci.0,addr=0x4 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x7 On guest: [root@localhost ~]# lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:02.0 VGA compatible controller: Red Hat, Inc. QXL paravirtual graphic card (rev 03) 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device 00:04.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01) 00:05.0 Communication controller: Red Hat, Inc Virtio console 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device 00:07.0 RAM memory: Red Hat, Inc Virtio memory balloon 00:08.0 Display controller: Red Hat, Inc. QXL paravirtual graphic card (rev 03) See here Xorg.0.log generated on guest: https://drive.google.com/file/d/0BwoPbcrMv8mvTm9VbE53ZmVKcVk/edit?usp=shari… In particular I see in it many: [ 64.234] (II) qxl(0): qxl_xf86crtc_resize: Placeholder resize 1024x768 [ 87.280] qxl_surface_create: Bad bpp: 1 (1) [ 87.280] qxl_surface_create: Bad bpp: 1 (1) [ 87.949] qxl_surface_create: Bad bpp: 1 (1) [ 110.469] qxl_surface_create: Bad bpp: 1 (1) [ 110.478] qxl_surface_create: Bad bpp: 1 (1) [ 146.096] - 0th attempt [ 146.096] - OOM at 962 511 24 (= 1474746 bytes) [ 146.096] Cache contents: null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null null 1008 997 1007 1005 1018 1003 1009 1011 1001 1012 1019 1016 1006 1013 total: 14 [ 146.107] - 1th attempt [ 146.107] - OOM at 962 511 24 (= 1474746 bytes) Gianluca

5 10

Call for Papers Extension: USENIX Lisa
by Brian Proffitt 14 Apr '14

14 Apr '14

All: Just a note to let you know that the CfP for USENIX LISA has been extended to this Friday, April 18, 2014, 11:59 p.m. PDT https://www.usenix.org/conference/lisa14/call-for-participation/papers-post… So you have a little more time to get a presentation in! BKP -- Brian Proffitt - oVirt Community Manager Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC

1 0

List disk images residing on specific lun
by Amedeo Salvati 13 Apr '14

13 Apr '14

Hello, does anyone know if it's possible, using ovirt-shell or api, to list every disk image residing on specific FC LUN? best regards Amedeo Salvati

3 5

dependency error when upgrade ovirt 3.3 -> 3.4 (CentOS)
by H. Haven Liu 13 Apr '14

13 Apr '14

Hello, I'm trying to upgrade an ovirt 3.3 installation to 3.4, but getting a dependency error. I tried to update the ovirt-engine-setup package to v 3.4.0-1.el6, which requires ovirt-engine-setup-plugin-ovirt-engine = 3.4.0-1.el6, which requires ovirt-engine >= 3.3.2. However, it appears that ovirt-engine 3.3 is in the versionlock list and cannot be updated. Should I manually disable the versionlock plugin, or am I missing something? Thanks, Haven

2 1

[Users] oVirt 3.4 Templates break Foreman Provisioning/Adding host
by Matt . 13 Apr '14

13 Apr '14

Hi Guys, On Foreman 1.4.2 it seems that you have issues with oVirt 3.4 when adding a host. When you add this host you will get an error as oVirt now has more templating stuff: VM template.id|name required for add Is there a workaround for this to get the creation of VM go further ? Thanks! Matt

5 13