- Users - oVirt List Archives

[Users] Requesting you to add me into mailing group
by Ravi Krishna 08 Mar '14

08 Mar '14

Hi, I am graduate student of Computer science from Villanova University. I would like to join the Ovirt community. Can you please add me into mailing group? Thank you very much. Respectfully Ravikrishna Adepu

2 1

[Users] Snapshots not listed for VM using 3.3.4
by Trey Dockendorf 08 Mar '14

08 Mar '14

I have two VMs in my cluster, one is CentOS 6.5 and one is CentOS 5.10. I have updated qemu on the ovirt nodes to use the RPMs from http://jenkins.ovirt.org/view/Packaging/job/qemu-kvm-rhev_create_rpms_el6. # yum list installed | grep qemu gpxe-roms-qemu.noarch 0.9.7-6.10.el6 @base qemu-img.x86_64 2:0.12.1.2-2.415.el6_5.4 qemu-kvm.x86_64 2:0.12.1.2-2.415.el6_5.4 qemu-kvm-tools.x86_64 2:0.12.1.2-2.415.el6_5.4 I am able to perform a snapshot using the web UI, which succeeds, but the snapshot is never listed in the "Snapshots" tab for either VM. Running "virsh -r snapshot-list <domain>" for either VMs shows no snapshots. Attached is vdsm.log and engine.log (output when creating snapshot of EL6 VM) and vdsm2.log and engine2.log (output when creating snapshot of EL5 VM). Engine and nodes are updated to 3.3.4

2 2

[Users] tags?
by Robert Story 07 Mar '14

07 Mar '14

--Sig_/vOYLcMNMT.kxNW7SNxIf=ey Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Hello, Can someone point me at a guide or explain to me the purpose of tags? I see that I can assign them to VMs and users, but don't grasp the purpose. Robert -- Senior Software Engineer @ Parsons --Sig_/vOYLcMNMT.kxNW7SNxIf=ey Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlMY9+kACgkQ7/fVLLY1mnjaWwCfVYFpm0TnybzzdUgaVJ+bPSsm ET0AniYsVfTajNUXrU34mWXuk+Xg+LUi =o4YK -----END PGP SIGNATURE----- --Sig_/vOYLcMNMT.kxNW7SNxIf=ey--

4 5

[Users] [oVirt Test Day 3] all-in-one
by danken＠redhat.com 07 Mar '14

07 Mar '14

Hi, I've tested all-in-one, and it went much smoother than I've expected! I must admit that it was a rather shallow test. - Installed a fresh CentOS 6.5 minimal installation - Followed http://www.ovirt.org/OVirt_3.4_Test_Day#Installation_notes - Followed http://www.ovirt.org/Feature/AllInOne#Installation_flow - Followed http://www.ovirt.org/Quick_Start_Guide#Install_oVirt - Typed Yes Yes Yes like a blind baboon - Connected to the admin portal - Created a VM - Ran it - Hibernated it. All went well. However, as reproted by Piotr in a parallel thread, I failed connect with spice to the VM. I had to run `service iptables restart` to make enable the iptables rules that were installed. Sandro, can this be done automatically?

3 2

[Users] [ovirt test day 3] DWH installation
by Sandro Bonazzola 07 Mar '14

07 Mar '14

For test day 3 I've tested DWH installation. first step, getting info on how to install it: gone to ovirt.org, followed "Start using oVirt now", there's no clue about DWH or reports there or a link to what's next basic oVirt engine setup. gone to http://www.ovirt.org/File:OVirt-3.0-Installation_Guide-en-US.pdf no clue about DWH existence gone to http://www.ovirt.org/OVirt_3.4_Test_Day no clue on how to test it using search lead to the following pages but no instructions on how to setup it there: http://www.ovirt.org/How_to_setup_a_oVirt_DWH_development_environment http://www.ovirt.org/Ovirt_DWH Not opening a BZ because Yaniv told me he's aware of the issue and will update the wiki starting next week. second step, installation with: # yum install ovirt-engine-dwh # engine-setup Install Data Warehouse on this host (Yes, No) [Yes]: Yes selected local database, automatic provisioning just installed usage experience: I've installed DWH, now what? connected to the web application, looking for DWH info: nothing on the webapp followed guide link: leads to http://www.ovirt.org/Documentation no clue there, so followed Guide to oVirt features which land to http://www.ovirt.org/OVirt_3.0_Feature_Guide which is outdated Not sure if open a BZ about above or if it will be fixed as part of the wiki update. installed reports for seeing stats collected by DWH: opened Bug 1073340 - traceback looking at system dashboard on a cleanly installed system That said, once added an host and created a VM everything looks working fine on both Fedora 19 and CentOS I wasn't able to test it on Gentoo because snmp4j failed to build due to unmappable ascii encoding (I'm using italian locale) Not opened a BZ on gentoo bugzilla since it comes from an experimental overlay Second test, install with remote DB: needed to use ovirt-3.4-snapshot instead of ovirt-3.4.0-prerelease for having the fixes on remote DB setup hit Bug 1067548 - [DWH-SETUP][TEXT] - misconfiguartion of remote DB setup note that also report is affected by the same issue other than that it seems to work fine on Fedora 19 and CentOS. -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

[Users] oVirt 3.4 RC test day results
by Doron Fediuck 07 Mar '14

07 Mar '14

Hi all, thanks for joining yesterday's RC test day! The results are 48 new bugs, and critical ones should be fixed for GA. Feel free to send reports on your work yesterday to the users list. Some additional stats- Bugs, Top 5: "bdagan(a)redhat.com" 2 "didi(a)redhat.com" 2 "hadong(a)redhat.com" 2 "lvernia(a)redhat.com" 2 "rhev-integ(a)redhat.com" 2 "pbenas(a)redhat.com" 3 "s.kieske(a)mittwald.de" 3 "istein(a)redhat.com" 4 "ydary(a)redhat.com" 6 Full list by reporter: http://goo.gl/tGzhDr IRC top 10: 5 boberson 6 Mossel 7 FIBERIT 8 rgolan 9 ydary 14 sahina 21 jvandewege 24 evilissimo 27 fabiand 35 sbonazzo

1 0

[Users] [oVirt Test Day 3] devel env report
by Alexander Wels 06 Mar '14

06 Mar '14

I installed the engine development environment from scratch on: Fedora 19: Followed the instructions and in about 30 minutes I was compiling a new engine which failed the first compile due to a java perm space error, I restarted the compile and it finished successfully. The box only had 4G of memory available so that might be the cause for the perm space issue. The instructions where up to date and accurate on what to do. Running the engine worked perfectly. Centos 6.5: Followed the instructions, and noticed the following omissions: 1. Issues with installing JBOSS as there is no repository available for Centos. After manual downloaded I installed JBOSS manually and continued on. 2. Then I found that maven is not available in a yum repo mentioned in the document anywhere so I have to manually install maven. 3. For the 3rd party packages, if you use java-devel it installs java 1.6, if you want to use java 1.7 you need to install java-1.7.0-openjdk-devel instead. After fixing those 3 issues, I had the same perm space error for Centos. Again that might be because the machine only has 4G of memory available. Rerunning the compile completed successfully. Had one minor hickup when running the engine, I used a live-cd to install Centos, and it didn't come with /etc/mime.types. This caused an exception in the engine log and none of the pages were styled. So I had to install mailcap to get it. Opened [1] to track this issue. Gentoo-engine: I was unable to get a working Gentoo machine (After many many hours of compiling the kernel wouldn't boot, must not have set the right flags or something), so unable to test here. Alexander [1] https://bugzilla.redhat.com/show_bug.cgi?id=1073548

1 0

[Users] [oVirt Test Day 3] Upgrade oVirt from 3.3.4 results
by Eli Mesika 06 Mar '14

06 Mar '14

Hi I had to test the upgrade from 3.3.4 to 3.4 I had installed and tested for sanity 3.3.4 but failed to upgrade it to 3.4 on CentOS Opened https://bugzilla.redhat.com/show_bug.cgi?id=1073487 Eli

2 1

[Users] [oVirt Test Day 3] ovirt-guest-agent
by ybronhei 06 Mar '14

06 Mar '14

I tried ovirt-guest-agent over fedora 19 and 20, - installed a vm with f19 - yum install ovirt-guest-agent - started the service - the information about machine name, ip address, os, ram, user all appeared after installation - notification for power off also appears same for f20 looks ok on both -- Yaniv Bronhaim.

1 0

[Users] [oVirt Test Day 3] All-in-one
by Piotr Kliczewski 06 Mar '14

06 Mar '14

Hello, I tested all-in-one and here is what I did. I installed fresh f19 on a vm running on my f20 (nested virt). During the installation of ovirt-engine-setup-plugin-allinone rpm I noticed that yum verification step for vdsm run forever but the second attempt succeeded. During engine setup iso domain failed to create [1]. Second attempt solved it. I noticed that for local cluster a user is able only to create data domain and only import iso and export domains. During creation of data domain I got permissions failure which disappeared after running second time (performed twice with the same result). After successful vm start I was not able to open spice console due to: "Unable to connect to the graphic server". When I tried with virt-manager I got: "viewer connection to hypervisor host got refused or disconnected". Danken noticed the same issue for CentOS. He noticed that after disabling iptables service it worked as well as after starting it again. Thanks, Piotr [1] https://bugzilla.redhat.com/show_bug.cgi?id=1073456

1 0