- Users - oVirt List Archives

[Users] Questions on ovirt 3.3 browser based spice/novnc working
by Dead Horse 16 Aug '13

16 Aug '13

After Referencing: http://www.ovirt.org/Features/noVNC_console http://www.ovirt.org/Features/SpiceHTML5 and looking at some of the related engine code. I am still attempting to get the spice/novnc browser based consoles to work. I am working from a build from master yesterday I used to upgrade over a previous 3.3 master build from about a month back. VDSM version on host is 4.12.0 built minutes ago. I have installed and configured the websocket proxy like so: Set WebSocketProxy to engine ENGINEIP port 6100 engine-config -s WebSocketProxy=ENGINEIP:6100 /usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh --name=websocket-proxy --password=install --subject="/C=US/O=DHC/CN=ENGINEFQDN" This generates: /etc/pki/ovirt-engine/keys/websocket-proxy.p12 /etc/pki/ovirt-engine/certs/websocket-proxy.cer /etc/pki/ovirt-engine/requests/websocket-proxy.req However it does not generate the key that websockify wants so we do: openssl pkcs12 -in websocket-proxy.p12 -nocerts -nodes -out /etc/pki/ovirt-engine/keys/websocket-proxy.key The configuration of ovirt-websocket-proxy: PROXY_HOST=* PROXY_PORT=6100 SOURCE_IS_IPV6=False SSL_CERTIFICATE=/etc/pki/ovirt-engine/certs/websocket-proxy.cer SSL_KEY=/etc/pki/ovirt-engine/keys/websocket-proxy.key FORCE_DATA_VERIFICATION=False CERT_FOR_DATA_VERIFICATION=/etc/pki/ovirt-engine/certs/engine.cer SSL_ONLY=True TRACE_ENABLE=False TRACE_FILE= ENGINE_USR="/usr/share/ovirt-engine" Install spice-html5 git clone http://anongit.freedesktop.org/git/spice/spice-html5.git mv spice-html5 /usr/share Test spice: In Webadmin UI we set create a VM, set display as spice, start it and set it's console to spice-html5. Result spice-html client opens in a new tab but does not connect. >From engine.log: 2013-08-01 12:49:52,352 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (ajp--127.0.0.1-8702-9) Running command: SetVmTicketCommand internal: false. Entities affected : ID: fec3260c-871a-4fbe-a006-9eee4fbfbbcc Type: VM 2013-08-01 12:49:52,371 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--127.0.0.1-8702-9) START, SetVmTicketVDSCommand(HostName = ovirtnodefoo, HostId = 5713e5c8-6252-4bce-a3f6-bbd8e1e6eb57, vmId=fec3260c-871a-4fbe-a006-9eee4fbfbbcc, ticket=TKfzUQJLLrUI, validTime=120,m userName=admin@internal, userId=fdfc627c-d875-11e0-90f0-83df133b58cc), log id: 5d258049 2013-08-01 12:49:52,445 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--127.0.0.1-8702-9) FINISH, SetVmTicketVDSCommand, log id: 5d258049 Test novnc: In Webadmin UI we set create a VM, set display as VNC, start it and set it's console to novnc. Result novnc client opens in a new tab but does not connect, but does display error: "Server disconnected (code: 1006) >From engine.log: 2013-08-01 12:50:44,800 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (ajp--127.0.0.1-8702-9) Running command: SetVmTicketCommand internal: false. Entities affected : ID: fec3260c-871a-4fbe-a006-9eee4fbfbbcc Type: VM 2013-08-01 12:50:44,833 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--127.0.0.1-8702-9) START, SetVmTicketVDSCommand(HostName = ovirtnodefoo, HostId = 5713e5c8-6252-4bce-a3f6-bbd8e1e6eb57, vmId=fec3260c-871a-4fbe-a006-9eee4fbfbbcc, ticket=IPWOWh6U9erd, validTime=120,m userName=admin@internal, userId=fdfc627c-d875-11e0-90f0-83df133b58cc), log id: bff6161 2013-08-01 12:50:44,917 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (ajp--127.0.0.1-8702-9) FINISH, SetVmTicketVDSCommand, log id: bff6161 I verified connection of both the spice/vnc console directly at the host level with a quick connect via virt-viewer. A quick scan with nmap of engine and host to verify sockets are open: Nmap scan report for engine Host is up (0.0042s latency). Not shown: 995 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 443/tcp open https 6100/tcp open synchronet-db Nmap scan report for host Host is up (0.0045s latency). Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 5900/tcp open vnc For grins I stopped the websocket proxy and manually started a websockify like so: websockify 3.57.111.11:6100 3.57.111.12:5900--cert=/etc/pki/ovirt-engine/certs/websocket-proxy.cer --key=/etc/pki/ovirt-engine/keys/websocket-proxy.key WARNING: no 'numpy' module, HyBi protocol is slower or disabled WebSocket server settings: - Listen on ENGINEIP:6100 - Flash security policy server - SSL/TLS support - proxying from ENGINEIP:6100 to HOSTIP:5900 Attempting another connection via https://ENGINEFQDN//ovirt-engine-novnc-main.html?host=ENGINEIP&port=6100res… in: 1: handler exception: [Errno 1] _ssl.c:1359: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca I should also note in case it matters that the SSLEnabled=false, and EnableSpiceRootCertificateValidation are both set as false are set in my engine options. Am I doing something wrong here, I don't see any reason this should not work? - DHC

3 15

[Users] How can oVirt use glusterfs ?
by higkoohk 16 Aug '13

16 Aug '13

Hello everyone :) How can oVirt use glusterfs as a storage ? Many thanks ! ----- higkoo 2013-08-16

3 2

[Users] Probelm starting VMs on nighly build to Aug 13th
by Hans-Joachim 14 Aug '13

14 Aug '13

--========GMXBoundary39561376489833908994 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, I've just reinstalled the complete ovirt suite based on nightly of Aug 13th. If I try to start an imported VM I run in the following error: 2013-08-14 14:16:03,559 ERROR [org.ovirt.engine.core.bll.RunVmCommand] (pool-6-thread-48) [782e7472] Command org.ovirt.engine.core.bll.RunVmCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't supported, if isEnabledForExtensions() == false (Failed with error VDS_NETWORK_ERROR and code 5022) Any hints?? Hans-Joachim --========GMXBoundary39561376489833908994 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /= ><br />I've just reinstalled the complete ovirt suite based on nightly of A= ug 13th.<br /><br />If I try to start an imported VM I run in the following= error:<br /><br />2013-08-14 14:16:03,559 ERROR [org.ovirt.engine.core.bll= .RunVmCommand] (pool-6-thread-48) [782e7472] Command org.ovirt.engine.core.= bll.RunVmCommand throw Vdc Bll exception. With error message VdcBLLExceptio= n: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apach= e.xmlrpc.common.XmlRpcExtensionException: Null values aren't supported, if = isEnabledForExtensions() =3D=3D false (Failed with error VDS_NETWORK_ERROR = and code 5022)<br /><br /><br />Any hints??<br /><br />Hans-Joachim</span><= /span> --========GMXBoundary39561376489833908994--

1 0

[Users] oVirt updates - August 13th 2013
by Itamar Heim 14 Aug '13

14 Aug '13

(some updates I collected from past weeks) General: - great oVirt 3.3 test day with 80 bugs reported on various new 3.3 features. - oVirt 3.3 RC build soon to come. - various deep dive sessions started on new 3.3 features[9] glance, neutron, power management and async tasks covered so far. Deployment: - Karli Sjöberg documented the process of going from oVirt-3.1 on Fedora to oVirt-3.2 on CentOS[3] - René Koch announced version 1.2.1 of the Nagios monitoring plugin[6] - Christophe Fergeau announced[1] a new spice-xpi 2.8.90 with windows support (and proxy support as well) - Eyal Edri announced ovirt rpm's are available for Fedora 19[7] - René van der Linden blogged about configuring IPA for oVirt[12] also has entries on all of this oVirt deployment[13] Devel: - gerrit was upgraded to gerrit 2.6. during the upgrade I forgot David Caro work on replacing the robots file so bing servers overloaded the server again. Juan was kind enough to send a patch to the gerrit project[2] to make the robots file configurable so we'll avoid this in the future (well, from gerrit 2.8). - A Clojure library to provision virtual machines in ovirt[11] Conferences/Talks: - (upcoming) greg padget will cover new sla mechanism in ovirt[8] at LinuxCon/CloudOpen NA (September 17th, New Orleans) - (upcoming) KvmForum and oVirt sessions at LinuxCon Europe in October - (past) Udayendu Kar covered KVM and oVirt in an Engineering College via a few talks and hands-on[5] - (past) Livnat Peer did an intro to ovirt session in Israel's open source conference August Penguin. Related: - Jon Benedict of NetApp published an update on their VSC beta[4] - VMWare vCloud Automation Center 5.2 added support for RHEV 3.1[10] Thanks, Itamar [1] http://lists.ovirt.org/pipermail/users/2013-August/015624.html [2] https://gerrit-review.googlesource.com/48411 [3] http://lists.ovirt.org/pipermail/users/2013-August/015609.html [4] http://captainkvm.com/2013/08/vsc-for-rhev-beta-is-live/ [5] http://udayendu.livejournal.com/671.html [6] http://lists.ovirt.org/pipermail/users/2013-July/015352.html [7] http://resources.ovirt.org/releases/nightly/rpm/Fedora/19 [8] http://linuxconcloudopenna2013.sched.org/event/983e0cfa39a71d80e6f5000a9b55… [9] http://www.ovirt.org/OVirt_3.3_release_notes [10] http://www.vmware.com/pdf/vcac-52-kvm-guide.pdf [11] https://github.com/RedHatQE/ovirt.client [12] https://www.rvanderlinden.net/wordpress/ovirt/administrator-portal/administ… [13] https://www.rvanderlinden.net/wordpress/ovirt/

1 0

[Users] Forcible edit of VLAN in ovirtmgmt logical network
by Karli Sjöberg 14 Aug '13

14 Aug '13

--_000_5F9E965F5A80BC468BE5F40576769F092E704DDDexchange21_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGkhDQoNCkhvdyBjYW4gSSBmb3JjZSBpbiBhIFZMQU4gdGFnIGluIHRoZSBvdmlydG1nbXQgbmV0 d29yaz8gQSBxdWljayBkYXRhYmFzZSBjaGFuZ2UgcGVyaGFwcz8NCg0KVGhpbmcgaXMsIEkgaGFk IHB1dCBhIFZMQU4gaW4gdGhlIG92aXJ0bWdtdCBuZXR3b3JrIGRlZmluaXRpb24gd2hlbiBJIHNl dCB0aGUgZW52aXJvbm1lbnQgdXAgaW4gb1ZpcnQtMy4xLiBCdXQgbm93IHRoYXQgaXTCtHMgdXBn cmFkZWQgdG8gMy4yLCBzb21ld2hlcmUgYWxvbmcgdGhlIGxpbmUsIGVuZ2luZSBzZWVtcyB0byBo YXZlIGZvcmdvdHRlbiB0aGF0IGFuZCBWTEFOIGluIG92aXJ0bWdtdCBpcyBub3cganVzdCBtYXJr ZWQgYXMgIi0iKE5vbmUpLi4uIEJ1dCBhbGwgb2YgdGhlIEhvc3RzIGFyZSBhbHJlYWR5IGNvbmZp Z3VyZWQgY29ycmVjdGx5IHdpdGggVkxBTiBvbiB0aGVpciBvdmlydG1nbXQgYnJpZGdlcywgc28g ZXZlcnkgdGltZSB5b3UgcHV0IGEgSG9zdCBpbiBtYWludGVuYW5jZSBhbmQgYWN0aXZhdGUgaXQg YWdhaW4sIGVuZ2luZSB3aGluZXMgdGhhdCBvdmlydG1nbXQgaXNuwrR0IHN5bmNocm9uaXplZCBj b3JyZWN0bHksIGV2ZW4gdGhvdWdoIHRoZXkgYXJlOyBjb25zaWRlcmluZyBpdMK0cyBlbmdpbmUg dGhhdMK0cyBnb3R0ZW4gdGhlIHdyb25nIGltcHJlc3Npb24uIEkgdHJpZWQgdG8gZWRpdCB0aGUg b3ZpcnRtZ210IG5ldHdvcmsgbmljZWx5IHRocm91Z2ggd2ViYWRtaW4gYnV0IGl0IHdvbsK0dCBs ZXQgbWUgc2luY2UgdGhlcmUgd2hlcmUgVk0ncyB1c2luZyBpdCwgc28gSSByZW1vdmVkIHRoZW0u IFN0aWxsIHdvdWxkbsK0dCBsZXQgbWUgZWRpdCBzaW5jZSB0aGVyZSB3aGVyZSBUZW1wbGF0ZXMg dXNpbmcgaXQsIHNvIEkgcmVtb3ZlZCB0aGVtIGFzIHdlbGwuIEFuZCBpdCBzdGlsbCB3b27CtHQg bGV0IG1lIGVkaXQgYmVjYXVzZSB0aGVyZSBhcmUgSG9zdHMgdXNpbmcgaXQtIGJ1dCBmb3IgUGV0 ZcK0cyBzYWtlLCBjb21lIG9uISBBbmQgdG8gcmVtb3ZlIHRob3NlIG5ldHdvcmtzIEkgd291bGQg bmVlZCB0byBzaHV0IGRvd24gdGhlIGVudGlyZSBzeXN0ZW0gYXMgaXQgc2VlbXMsIGFuZCB0aGF0 IGlzIGp1c3QgaW1wb3NzaWJsZS4NCg0KU28gaXMgdGhlcmUgYSBtb3JlIHByb21wdCB3YXkgb2Yg Y29udmluY2luZyBlbmdpbmUgdGhhdCB0aGVyZSBpcyBhIFZMQU4gaW4gdGhlIGxvZ2ljYWwgbmV0 d29yayBkZWZpbml0aW9uIGZvciBvdmlydG1nbXQ/DQoNCi0tDQoNCk1lZCBWw6RubGlnYSBIw6Rs c25pbmdhcg0KLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLQ0KS2FybGkgU2rDtmJlcmcNClN3ZWRpc2gg VW5pdmVyc2l0eSBvZiBBZ3JpY3VsdHVyYWwgU2NpZW5jZXMNCkJveCA3MDc5IChWaXNpdGluZyBB ZGRyZXNzIEtyb27DpXN2w6RnZW4gOCkNClMtNzUwIDA3IFVwcHNhbGEsIFN3ZWRlbg0KUGhvbmU6 ICArNDYtKDApMTgtNjcgMTUgNjYNCmthcmxpLnNqb2JlcmdAc2x1LnNlPG1haWx0bzprYXJsaS5z am9iZXJnQGFkbS5zbHUuc2U+DQo= --_000_5F9E965F5A80BC468BE5F40576769F092E704DDDexchange21_ Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 PCFET0NUWVBFIEhUTUwgUFVCTElDICItLy9XM0MvL0RURCBIVE1MIDQuMCBUUkFOU0lUSU9OQUwv L0VOIj4NCjxodG1sPg0KPGhlYWQ+DQo8bWV0YSBodHRwLWVxdWl2PSJDb250ZW50LVR5cGUiIGNv bnRlbnQ9InRleHQvaHRtbDsgY2hhcnNldD11dGYtOCI+DQo8bWV0YSBuYW1lPSJHRU5FUkFUT1Ii IGNvbnRlbnQ9Ikd0a0hUTUwvNC42LjQiPg0KPC9oZWFkPg0KPGJvZHk+DQpIaSE8YnI+DQo8YnI+ DQpIb3cgY2FuIEkgZm9yY2UgaW4gYSBWTEFOIHRhZyBpbiB0aGUgb3ZpcnRtZ210IG5ldHdvcms/ IEEgcXVpY2sgZGF0YWJhc2UgY2hhbmdlIHBlcmhhcHM/PGJyPg0KPGJyPg0KVGhpbmcgaXMsIEkg aGFkIHB1dCBhIFZMQU4gaW4gdGhlIG92aXJ0bWdtdCBuZXR3b3JrIGRlZmluaXRpb24gd2hlbiBJ IHNldCB0aGUgZW52aXJvbm1lbnQgdXAgaW4gb1ZpcnQtMy4xLiBCdXQgbm93IHRoYXQgaXTCtHMg dXBncmFkZWQgdG8gMy4yLCBzb21ld2hlcmUgYWxvbmcgdGhlIGxpbmUsIGVuZ2luZSBzZWVtcyB0 byBoYXZlIGZvcmdvdHRlbiB0aGF0IGFuZCBWTEFOIGluIG92aXJ0bWdtdCBpcyBub3cganVzdCBt YXJrZWQgYXMgJnF1b3Q7LSZxdW90OyhOb25lKS4uLg0KIEJ1dCBhbGwgb2YgdGhlIEhvc3RzIGFy ZSBhbHJlYWR5IGNvbmZpZ3VyZWQgY29ycmVjdGx5IHdpdGggVkxBTiBvbiB0aGVpciBvdmlydG1n bXQgYnJpZGdlcywgc28gZXZlcnkgdGltZSB5b3UgcHV0IGEgSG9zdCBpbiBtYWludGVuYW5jZSBh bmQgYWN0aXZhdGUgaXQgYWdhaW4sIGVuZ2luZSB3aGluZXMgdGhhdCBvdmlydG1nbXQgaXNuwrR0 IHN5bmNocm9uaXplZCBjb3JyZWN0bHksIGV2ZW4gdGhvdWdoIHRoZXkgYXJlOyBjb25zaWRlcmlu ZyBpdMK0cw0KIGVuZ2luZSB0aGF0wrRzIGdvdHRlbiB0aGUgd3JvbmcgaW1wcmVzc2lvbi4gSSB0 cmllZCB0byBlZGl0IHRoZSBvdmlydG1nbXQgbmV0d29yayBuaWNlbHkgdGhyb3VnaCB3ZWJhZG1p biBidXQgaXQgd29uwrR0IGxldCBtZSBzaW5jZSB0aGVyZSB3aGVyZSBWTSdzIHVzaW5nIGl0LCBz byBJIHJlbW92ZWQgdGhlbS4gU3RpbGwgd291bGRuwrR0IGxldCBtZSBlZGl0IHNpbmNlIHRoZXJl IHdoZXJlIFRlbXBsYXRlcyB1c2luZyBpdCwgc28gSSByZW1vdmVkIHRoZW0NCiBhcyB3ZWxsLiBB bmQgaXQgc3RpbGwgd29uwrR0IGxldCBtZSBlZGl0IGJlY2F1c2UgdGhlcmUgYXJlIEhvc3RzIHVz aW5nIGl0LSBidXQgZm9yIFBldGXCtHMgc2FrZSwgY29tZSBvbiEgQW5kIHRvIHJlbW92ZSB0aG9z ZSBuZXR3b3JrcyBJIHdvdWxkIG5lZWQgdG8gc2h1dCBkb3duIHRoZSBlbnRpcmUgc3lzdGVtIGFz IGl0IHNlZW1zLCBhbmQgdGhhdCBpcyBqdXN0IGltcG9zc2libGUuPGJyPg0KPGJyPg0KU28gaXMg dGhlcmUgYSBtb3JlIHByb21wdCB3YXkgb2YgY29udmluY2luZyBlbmdpbmUgdGhhdCB0aGVyZSBp cyBhIFZMQU4gaW4gdGhlIGxvZ2ljYWwgbmV0d29yayBkZWZpbml0aW9uIGZvciBvdmlydG1nbXQ/ PGJyPg0KPGJyPg0KPHRhYmxlIGNlbGxzcGFjaW5nPSIwIiBjZWxscGFkZGluZz0iMCIgd2lkdGg9 IjEwMCUiPg0KPHRib2R5Pg0KPHRyPg0KPHRkPi0tIDxicj4NCjxicj4NCk1lZCBWw6RubGlnYSBI w6Rsc25pbmdhcjxicj4NCi0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS08YnI+DQpLYXJsaSBTasO2YmVy Zzxicj4NClN3ZWRpc2ggVW5pdmVyc2l0eSBvZiBBZ3JpY3VsdHVyYWwgU2NpZW5jZXM8YnI+DQpC b3ggNzA3OSAoVmlzaXRpbmcgQWRkcmVzcyBLcm9uw6VzdsOkZ2VuIDgpPGJyPg0KUy03NTAgMDcg VXBwc2FsYSwgU3dlZGVuPGJyPg0KUGhvbmU6ICZuYnNwOyYjNDM7NDYtKDApMTgtNjcgMTUgNjY8 YnI+DQo8YSBocmVmPSJtYWlsdG86a2FybGkuc2pvYmVyZ0BhZG0uc2x1LnNlIj5rYXJsaS5zam9i ZXJnQHNsdS5zZTwvYT4gPC90ZD4NCjwvdHI+DQo8L3Rib2R5Pg0KPC90YWJsZT4NCjwvYm9keT4N CjwvaHRtbD4NCg== --_000_5F9E965F5A80BC468BE5F40576769F092E704DDDexchange21_--

2 2

[Users] oVirt 3.3 RC build
by Winfried de Heiden 14 Aug '13

14 Aug '13

Hi all, As shown on http://www.ovirt.org/OVirt_3.3_release-management: Timeline These are tentative planning dates and may change General availability: 2013-08-28 Beta release: 2013-07-18 Feature freeze: 2013-07-17 oVirt 3.3 Test Day: 2013-07-24 RC Build: 2013-08-14 Will the oVirt 3.3 RC build be released today? Can't wait.... Winfried

1 0

[Users] virt-v2v import needs saslauth credentials
by Jim Kinney 13 Aug '13

13 Aug '13

I need to convert a vmdk to ovirt use. I have a qcow2 formatted image and it's corresponding xml. I'm trying to run virt-v2v to put things into the proper formats/places for ovirt but I need to use my proper credentials to access the qemu:///system space. Where/how do I do this? man pages have no suggestions on virt-v2v. I have a user/passwd combo in saslauth that works for virsh. virt-v2v -i libvirtxml -o libvirt -os export --vmtype server -n ovirtmgmt /var/lib/exports/exports/5eb89069-b750-4d32-b7d3-432fd77202d1/images/test/test.xml virt-v2v: Failed to connect to qemu:///system: libvirt error code: 45, message: authentication failed: Failed to step SASL negotiation: -7 (SASL(-7): invalid parameter supplied: Unexpectedly missing a prompt result) -- -- James P. Kinney III * *Every time you stop a school, you will have to build a jail. What you gain at one end you lose at the other. It's like feeding a dog on his own tail. It won't fatten the dog. - Speech 11/23/1900 Mark Twain * http://heretothereideas.blogspot.com/ *

3 6

[Users] message about excessive bounces
by Gianluca Cecchi 13 Aug '13

13 Aug '13

Hello, I just received a mail about what in subject .. Your membership in the mailing list Users has been disabled due to excessive bounces.... I re-enabled my membership in the mean time. Just to know if it is actually a problem of mine (aka gmail and no configuration change at all) or list related. Thanks, Gianluca

2 1

[Users] Problem Creating "oVirt Engine" - Stuck on FQDN
by Richie＠HIP 13 Aug '13

13 Aug '13

--Apple-Mail=_AD180662-4FCF-4C73-B3D5-7EED0DCBC0AA Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 hi oVirt Community. This will be my first posting for help to the oVirt community, so please = bear with me I'f I'm not to the etiquette standards you might have = already. I'm trying to test oVirt as a FOSS Virtualization solution for small- to = medium-sized healthcare organizations implementing various health = information technology solutions (HIT) that the new health care reform = is requiring. As a Clinical informatist, I'm very concerned about = health care costs, hence I'm pushing for open source to take a wider = stance in U.S. health care to reduce costs where possible and divert = moneys to patient care. Now enough with my altruistic desires, and let = go into the deep. I'm trying to create "virtual machines" (using VirtualBox, Parallels = and/or VMWare Workstation); mainly one for "oVirt Engine"; ind later a = the second one for "oVirt Nodes". This way, these VM's files can be = copier to any hardware and underlying OS, so at least the "Virt Engine" = is easily installed and brought-up to facilitate managing oVirt Nodes. = I considered creating ".iso" images of each component (Engine and Nodes) = but I'm afraid this will hit the wall for linux novices when installing = the ".iso" images in different hardware platforms (with different = processors, number of cores, RAM, chipsets, etc.) I've begun with creating a VM for oVirt Engine under Parallels (albeit I = began with VirtualBox, but drivers "client additions" aren't compatible = with Fedora 18 - so I'll migrate this Parallels VM to VB once it is = operational) Fedora 18 installed without a single problem. I then = installed all "oVirt Engine" requirements by performing the instructions = published in http://www.ovirt.org/Download - that is: First:=20 sudo yum localinstall = http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm Second: =20 sudo yum install -y ovirt-engine Third: =85I get stuck=85!!! When I am performing the third step, I hit the fan. Each time I perform = the third step shown in the aforementioned web page (i.e. sudo = engine-setup), the "Welcome to oVirt Engine setup utility" appears and = begins to run until I reach the point where I need to define a "Fully = Qualified Domain Name." =20 NOTE - A video of how to install oVirt in a single machine, entitled = "Installing oVirt on a single machine" (at: = http://www.ovirt.org/Documentation) shows the process (with some = exemptions because it was recorded while oVirt v3.x was in beta), but I = don't get what the video shows=85!!! This is what I do and before getting stuck in the "FQDN thing" (no pun = intended=85!!!). As third-step, I enter: sudo engine-setup I follow the prompts that appear after the "Welcome to oVirt Engine = setup utility" is shown in the terminal window until I get to the = prompt: =20 Host fully qualified domain name. Note: this name should be = fully resolvable [localhost.localdomain] :=20 If I press "Enter", I get=85: The IP (127.0.0.1) which was resolved from the FQDN = localhost.localdomain is not configured on any non loopback interface on = this host I figured that in order to define a FQDNm I had to expose my "oVirt = Engine" VN to the Internet. Since I'm doing all from home (where I'm = limited to a "Dynamic IP", albeit, which hardly-ever changes) I went to = DynDns.org and created an entry so my "FQDN Text-URL" would resolve to = the IP where I'm at. I also modified my Domain's DNS and entered a "DNS = Alias" named "dcmanagement", defining this "DNS alias" to resolve into = my IP by going to DynDNS.org to get my "Public IP". Hence, the alias = "dcmanagement1" resolves by going to "healthcareinfopartners.dyndns.org" = and gets my Public IP. NOTE - To test this setup, I do "ping" to either = "healthcareinfopartners.dyndns.org" or = "dcmanagement1.healthcareinfopartners.dyndns.org" and I get my Dynamic = Public IP back. Once the "Text URL" issue was returning my IP (as FQDN = expect) I repeated the:=20 sudo engine-setup Upon reaching: Host fully qualified domain name. Note: this name should be = fully resolvable [localhost.localdomain] :=20 I entered "dcmanagement1.healthcareinfopartners.com" and got my Public = IP back with the following message: The IP (70.45.xxx.xx) which was resolved from the FQDN = dcmanagement1.healthcareinfopartners.com is not configured on any non = loopback interface on this host Now, here's the question. What does anyone suggest I do to overcome the = FQDN setting and continue the installation process=85? =20 Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com --Apple-Mail=_AD180662-4FCF-4C73-B3D5-7EED0DCBC0AA Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">hi = oVirt Community.<div><br></div><div>This will be my first posting for = help to the oVirt community, so please bear with me I'f I'm not to the = etiquette standards you might have already.</div><div><br></div><div>I'm = trying to test oVirt as a FOSS Virtualization solution for small- to = medium-sized healthcare organizations implementing various health = information technology solutions (HIT) that the new health care reform = is requiring.  As a Clinical informatist, I'm very concerned about = health care costs, hence I'm pushing for open source to take a wider = stance in U.S. health care to reduce costs where possible and divert = moneys to patient care.  Now enough with my altruistic desires, and = let go into the deep.</div><div><br></div><div>I'm trying to create = "virtual machines" (using VirtualBox, Parallels and/or VMWare = Workstation); mainly one for "oVirt Engine"; ind later a the second one = for "oVirt Nodes".  This way, these VM's files can be copier to any = hardware and underlying OS, so at least the "Virt Engine" is easily = installed and brought-up to facilitate managing oVirt Nodes.  I = considered creating ".iso" images of each component (Engine and Nodes) = but I'm afraid this will hit the wall for linux novices when installing = the ".iso" images in different hardware platforms (with different = processors, number of cores, RAM, chipsets, = etc.)</div><div><br></div><div>I've begun with creating a VM for oVirt = Engine under Parallels (albeit I began with VirtualBox, but drivers = "client additions" aren't compatible with Fedora 18 - so I'll migrate = this Parallels VM to VB once it is operational)  Fedora 18 = installed without a single problem.  I then installed all "oVirt = Engine" requirements by performing the instructions published in <a = href=3D"http://www.ovirt.org/Download">http://www.ovirt.org/Download</a> = - that is:</div><div><br></div><div><b>First:</b> </div><div><span = class=3D"Apple-tab-span" style=3D"white-space:pre"> = </span>   sudo yum localinstall <a = href=3D"http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm">http://= ovirt.org/releases/ovirt-release-fedora.noarch.rpm</a></div><div><br></div= ><div><b>Second:</b>  </div><div><span style=3D"font-family: = Courier; "><span class=3D"Apple-tab-span" style=3D"white-space:pre"> = </span>sudo yum install -y = ovirt-engine</span></div><div><br></div><div><b>Third:</b>  =85I = get stuck=85!!!</div><div><br></div><div>When I am performing the = <b>third</b> step, I hit the fan.  Each time I perform the third = step shown in the aforementioned web page (i.e. <font = face=3D"Courier">sudo engine-setup</font>), the "<b>Welcome to oVirt = Engine setup utility</b>" appears and begins to run until I reach the = point where I need to define a "<i><b>Fully Qualified Domain = Name</b></i>."  </div><div><br></div><div><i>NOTE - A video of how = to install oVirt in a single machine, entitled "Installing oVirt on = a single machine" (at: <a = href=3D"http://www.ovirt.org/Documentation">http://www.ovirt.org/Documenta= tion</a>) shows the process (with some exemptions because it was = recorded while oVirt v3.x was in beta), but I don't get what the video = shows=85!!!</i></div><div><br></div><div>This is what I do and before = getting stuck in the "FQDN thing" (no pun intended=85!!!).  <b>As = third-step, I enter:</b></div><div><br></div><div><font = face=3D"Courier"><span class=3D"Apple-tab-span" style=3D"white-space:pre">= </span>sudo engine-setup</font></div><div><br></div><div>I = follow the prompts that appear after the <i>"Welcome to oVirt Engine = setup utility"</i> is shown in the terminal = window until I get to the prompt:</div><div><span = style=3D"font-family: Courier; "> </span></div><div><span = style=3D"font-family: Courier; "><span class=3D"Apple-tab-span" = style=3D"white-space:pre"> </span>Host fully qualified domain name. = Note: this name should be fully resolvable</span><span = style=3D"font-family: Courier; ">  </span><span = style=3D"font-family: Courier; ">[localhost.localdomain] :</span><span = style=3D"font-family: Courier; "> </span></div><div><div><font = face=3D"Courier"><br></font></div><div><b>If I press "Enter", I = get=85:<br></b><font face=3D"Courier"><br></font></div><div><font = face=3D"Courier"><span class=3D"Apple-tab-span" style=3D"white-space:pre">= </span>The IP (127.0.0.1) which was resolved from the FQDN = localhost.localdomain is not configured on any non loopback interface on = this host<br></font><br>I figured that in order to define a FQDNm I had = to expose my "oVirt Engine" VN to the Internet.  Since I'm doing = all from home (where I'm limited to a "Dynamic IP", albeit, which = hardly-ever changes) I went to <a = href=3D"http://DynDns.org">DynDns.org</a> and created an entry so my = "FQDN Text-URL" would resolve to the IP where I'm at.  I also = modified my Domain's DNS and entered a "DNS Alias" named "dcmanagement", = defining this "DNS alias" to resolve into my IP by going to <a = href=3D"http://DynDNS.org">DynDNS.org</a> to get my "Public IP". =  Hence, <b>the alias "dcmanagement1" resolves by going = to "<a = href=3D"http://healthcareinfopartners.dyndns.org">healthcareinfopartners.d= yndns.org</a>" and gets my Public IP.</b></div><div><br></div><div>NOTE = - To test this setup, I do "ping" to either "<i><a = href=3D"http://healthcareinfopartners.dyndns.org">healthcareinfopartners.d= yndns.org</a></i>" or "<i><a = href=3D"http://dcmanagement1.healthcareinfopartners.dyndns.org">dcmanageme= nt1.healthcareinfopartners.dyndns.org</a></i>" and I get my Dynamic = Public IP back.  Once the "Text URL" issue was returning my IP (as = FQDN expect) I repeated the: </div><div><br><span = class=3D"Apple-tab-span" style=3D"font-family: Courier; white-space: = pre; "> </span><span style=3D"font-family: Courier; ">sudo = engine-setup</span><br><br>Upon reaching:<br><br><font = face=3D"Courier"><span class=3D"Apple-tab-span" style=3D"white-space:pre">= </span>Host fully qualified domain name. Note: this name should = be fully resolvable  [localhost.localdomain] = :</font> </div><div><br></div><div>I entered <b>"<a = href=3D"http://dcmanagement1.healthcareinfopartners.com">dcmanagement1.hea= lthcareinfopartners.com</a>"</b> and got my Public IP back with the = following message:<br><br><font face=3D"Courier"><span = class=3D"Apple-tab-span" style=3D"white-space:pre"> </span>The IP = (70.45.xxx.xx) which was resolved from the FQDN <a = href=3D"http://dcmanagement1.healthcareinfopartners.com">dcmanagement1.hea= lthcareinfopartners.com</a> is not configured on any non loopback = interface on this host</font><br><br><br><b>Now, here's the question. =  What does anyone suggest I do to overcome the FQDN setting and = continue the installation = process=85?</b><br><div><br></div><div>    <br><div = apple-content-edited=3D"true"> <div style=3D"color: rgb(0, 0, 0); font-family: Helvetica; font-size: = medium; font-style: normal; font-variant: normal; font-weight: normal; = letter-spacing: normal; line-height: normal; orphans: 2; text-align: = -webkit-auto; text-indent: 0px; text-transform: none; white-space: = normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; = -webkit-text-stroke-width: 0px; word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><span = class=3D"Apple-style-span" style=3D"border-collapse: separate; = border-spacing: 0px; "><span class=3D"Apple-style-span" = style=3D"border-collapse: separate; color: rgb(0, 0, 0); font-family: = Helvetica; font-size: medium; font-style: normal; font-variant: normal; = font-weight: normal; letter-spacing: normal; line-height: normal; = orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; = widows: 2; word-spacing: 0px; border-spacing: 0px; = -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: = auto; -webkit-text-stroke-width: 0px; "><div style=3D"word-wrap: = break-word; -webkit-nbsp-mode: space; -webkit-line-break: = after-white-space; "><span class=3D"Apple-style-span" = style=3D"border-collapse: separate; color: rgb(0, 0, 0); font-family: = Helvetica; font-size: 12px; font-style: normal; font-variant: normal; = font-weight: normal; letter-spacing: normal; line-height: normal; = orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; = widows: 2; word-spacing: 0px; border-spacing: 0px; = -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: = auto; -webkit-text-stroke-width: 0px; "><div style=3D"word-wrap: = break-word; -webkit-nbsp-mode: space; -webkit-line-break: = after-white-space; "><span class=3D"Apple-style-span" = style=3D"border-collapse: separate; color: rgb(0, 0, 0); font-family: = Helvetica; font-size: 12px; font-style: normal; font-variant: normal; = font-weight: normal; letter-spacing: normal; line-height: normal; = orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; = widows: 2; word-spacing: 0px; border-spacing: 0px; = -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: = auto; -webkit-text-stroke-width: 0px; "><div style=3D"word-wrap: = break-word; -webkit-nbsp-mode: space; -webkit-line-break: = after-white-space; "><div><b><br class=3D"Apple-interchange-newline">Jos=E9= E ("Richie") Piovanetti, MD, MS</b> </div><div>M: 787-615-4884 | = <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a></div><div><br></div></div></span><br = class=3D"Apple-interchange-newline"></div></span><br = class=3D"Apple-interchange-newline"></div></span><br = class=3D"Apple-interchange-newline"></span><br = class=3D"Apple-interchange-newline"></div> </div> <br></div></div></div></body></html>= --Apple-Mail=_AD180662-4FCF-4C73-B3D5-7EED0DCBC0AA--

10 49

[Users] Host installation issues
by Doug Bishop 12 Aug '13

12 Aug '13

Hello, Hopefully some one can point me in the right direction. I have a ovirt-management node running centos 6.4 and 1 compute host also running centos 6.4. The management node is running and configured correctly. However when I attempt to add a host im getting the following in my ovirt engine.log: 2013-08-09 16:05:03,755 INFO [org.ovirt.engine.core.bll.VdsInstaller] (NioProcessor-65) Installation of 192.168.50.4. Received message: <BSTRAP component='SetNetworking' status='FAIL' message='addNetwork error trying to add management bridge'/>. FYI. (Stage: Running first installation script on Host) 2013-08-09 16:05:03,766 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (NioProcessor-65) Installation of 192.168.50.4. Received message: <BSTRAP component='RHEV_INSTALL' status='FAIL'/>. Error occured. (Stage: Running first installation script on Host) 2013-08-09 16:05:03,814 ERROR [org.ovirt.engine.core.utils.hostinstall.VdsInstallerSSH] (pool-3-thread-50) SSH error running command root(a)192.168.50.4:'umask 0077; MYTMP="$(mktemp -t ovirt-XXXXXXXXXX)"; trap "chmod -R u+rwX \"${MYTMP}\" > /dev/null 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; rm -fr "${MYTMP}" && mkdir "${MYTMP}" && tar -C "${MYTMP}" --no-same-permissions -o -x && "${MYTMP}"/setup -c 'ssl=true;management_port=54321' -O 'ux-of-ovr1-hw' -t 2013-08-09T20:04:54 -f /tmp/firewall.conf.fc06688a-e180-4cdf-960c-0afec02c3bce -S /tmp/ovirt-id_rsa_fc06688a-e180-4cdf-960c-0afec02c3bce -p 80 -b -B ovirtmgmt http://ux-of-ovr1-hw:80/Components/vds/ http://ux-of-ovr1-hw:80/Components/vds/ 192.168.50.4 fc06688a-e180-4cdf-960c-0afec02c3bce False': java.io.IOException: Command returned failure code 1 during SSH session 'root(a)192.168.50.4' 'umask 0077; MYTMP="$(mktemp -t ovirt-XXXXXXXXXX)"; trap "chmod -R u+rwX \"${MYTMP}\" > /dev/null 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; rm -fr "${MYTMP}" && mkdir "${MYTMP}" && tar -C "${MYTMP}" --no-same-permissions -o -x && "${MYTMP}"/setup -c 'ssl=true;management_port=54321' -O 'ux-of-ovr1-hw' -t 2013-08-09T20:04:54 -f /tmp/firewall.conf.fc06688a-e180-4cdf-960c-0afec02c3bce -S /tmp/ovirt-id_rsa_fc06688a-e180-4cdf-960c-0afec02c3bce -p 80 -b -B ovirtmgmt http://ux-of-ovr1-hw:80/Components/vds/ http://ux-of-ovr1-hw:80/Components/vds/ 192.168.50.4 fc06688a-e180-4cdf-960c-0afec02c3bce False' at org.ovirt.engine.core.utils.ssh.SSHClient.executeCommand(SSHClient.java:501) [engine-utils.jar:] at org.ovirt.engine.core.utils.hostinstall.VdsInstallerSSH.executeCommand(VdsInstallerSSH.java:438) [engine-utils.jar:] at org.ovirt.engine.core.bll.VdsInstaller.runBootstrapCommand(VdsInstaller.java:216) [engine-bll.jar:] at org.ovirt.engine.core.bll.VdsInstaller.RunStage(VdsInstaller.java:340) [engine-bll.jar:] at org.ovirt.engine.core.bll.VdsInstaller.Install(VdsInstaller.java:279) [engine-bll.jar:] at org.ovirt.engine.core.bll.InstallVdsCommand.executeCommand(InstallVdsCommand.java:110) [engine-bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:875) [engine-bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeActionInTransactionScope(CommandBase.java:964) [engine-bll.jar:] at org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:1345) [engine-bll.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppressed(TransactionSupport.java:166) [engine-utils.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(TransactionSupport.java:108) [engine-utils.jar:] at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:982) [engine-bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:291) [engine-bll.jar:] at org.ovirt.engine.core.bll.MultipleActionsRunner.executeValidatedCommands(MultipleActionsRunner.java:200) [engine-bll.jar:] at org.ovirt.engine.core.bll.MultipleActionsRunner.RunCommands(MultipleActionsRunner.java:180) [engine-bll.jar:] at org.ovirt.engine.core.bll.MultipleActionsRunner$1.run(MultipleActionsRunner.java:101) [engine-bll.jar:] at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$InternalWrapperRunnable.run(ThreadPoolUtil.java:64) [engine-utils.jar:] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) [rt.jar:1.6.0_24] at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) [rt.jar:1.6.0_24] at java.util.concurrent.FutureTask.run(FutureTask.java:166) [rt.jar:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1146) [rt.jar:1.6.0_24] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) [rt.jar:1.6.0_24] at java.lang.Thread.run(Thread.java:679) [rt.jar:1.6.0_24] I have checked for the obvious such as name resolution etc. I am using the following installation guide: http://wiki.centos.org/HowTos/oVirt Thanks! Doug Bishop NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) or entity and may contain sensitive information that is confidential, proprietary, privileged or otherwise protected by law. Any unauthorized review, use, disclosure, distribution, copying or other use of, or taking of any action in reliance upon, is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this message. This e-mail is and any response to it will be unencrypted and, therefore, potentially unsecure. The recipient should check this email and any attachments for the presence of viruses/malware according to security best practices. Thank you.

2 8