- Users - oVirt List Archives

Re: [Users] Host installation problems. Brigde
by Christer Olsen 13 Mar '13

13 Mar '13

Does anyone have a clue what i might need to do ? On Tue, Mar 12, 2013 at 4:12 PM, Christer Olsen <christer.r.olsen(a)gmail.com>wrote: > Does anyone have a clue what i might need to do ? > > > > > On Mon, Mar 11, 2013 at 4:55 PM, Christer Olsen < > christer.r.olsen(a)gmail.com> wrote: > >> Here is the complete log file. >> >> http://pastebin.com/5VYg4DFs >> >> >> On Mon, Mar 11, 2013 at 10:31 AM, Antoni Segura Puimedon < >> asegurap(a)redhat.com> wrote: >> >>> >>> >>> ----- Original Message ----- >>> > From: "Dan Kenigsberg" <danken(a)redhat.com> >>> > To: "Christer Olsen" <christer.r.olsen(a)gmail.com> >>> > Cc: users(a)ovirt.org >>> > Sent: Monday, March 11, 2013 10:18:13 AM >>> > Subject: Re: [Users] Host installation problems. Brigde >>> > >>> > On Sun, Mar 10, 2013 at 07:30:15PM +0100, Christer Olsen wrote: >>> > > I'm having issues with installing host in oVirt. >>> > > >>> > > >>> > > Manager reports: >>> > > Failed to install Host localhost. Step: SetNetworking; Details: >>> > > addNetwork >>> > > error trying to add management bridge. >>> > >>> > Which version of ovirt are you using? ovirt-3.2 should be using >>> > ovirt-host-deploy, which has differently-looking logs, and hopefully >>> > less bugs. >>> >>> According to the repo he listed, ovirt-3.1, as seen in: >>> >>> http://dev.centos.org/centos/6/ovirt/x86_64/RPMS/ >>> >>> > >>> > > >>> > > >>> > > *** LOG *** >>> > > >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 517 getAddress Entry. >>> > > url= >>> > > http://10.1.1.30:22020/Components/vds/ >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 539 getAddress >>> > > return. >>> > > address=10.1.1.30 port=22020 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 957 makeBridge begin. >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 424 _getMGTIface: >>> > > read host >>> > > name: 10.1.1.30 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 431 _getMGTIface: >>> > > using host >>> > > name 10.1.1.30 strIP= 10.1.1.30 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 437 _getMGTIface >>> > > IP=10.1.1.30 >>> > > strIface=eth0 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 997 makeBridge found >>> > > the >>> > > following bridge paramaters: ['NAME=', 'BOOTPROTO=dhcp', $ >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 135 >>> > > ['/usr/share/vdsm/addNetwork', 'ovirtmgmt', '', '', 'eth0', >>> > > 'NAME=', >>> > > 'BOOTPROT$ >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 143 Specified netmask >>> > > or >>> > > gateway but not ip >>> > > >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 144 >>> > > WARNING:root:options >>> > > IPADDR is deprecated. Use ipaddr instead >>> > > WARNING:root:options NETMASK is deprecated. Use netmask instead >>> > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead >>> > > WARNING:root:options ONBOOT is deprecated. Use onboot instead >>> > > Traceback (most recent call last): >>> > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> >>> > > main() >>> > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main >>> > > addNetwork(bridge, **kwargs) >>> > > File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork >>> > > bridged=bridged, **options) >>> > > File "/usr/share/vdsm/configNetwork.py", line 823, in >>> > > _addNetworkValidation >>> > > "Specified netmask or gateway but not ip") >>> > > ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') >>> > > >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1037 makeBridge >>> > > Failed to add >>> > > ovirtmgmt bridge out=Specified netmask or gateway bu$ >>> > > >>> > > err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead >>> > > WARNING:root:options NETMASK is deprecated. Use netmask instead >>> > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead >>> > > WARNING:root:options ONBOOT is deprecated. Use onboot instead >>> > > Traceback (most recent call last): >>> > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> >>> > > main() >>> > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main >>> > > addNetwork(bridge, **kwargs) >>> > > File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork >>> > > bridged=bridged, **options) >>> > > File "/usr/share/vdsm/configNetwork.py", line 823, in >>> > > _addNetworkValidation >>> > > "Specified netmask or gateway but not ip") >>> > > ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') >>> > > >>> > > ret=22 >>> > > Sun, 10 Mar 2013 19:19:30 ERROR deployUtil 1052 makeBridge >>> > > errored: >>> > > out=Specified netmask or gateway but not ip >>> > > >>> > > err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead >>> > > WARNING:root:options NETMASK is deprecated. Use netmask instead >>> > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead >>> > > WARNING:root:options ONBOOT is deprecated. Use onboot instead >>> > > Traceback (most recent call last): >>> > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> >>> > > main() >>> > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main >>> > > addNetwork(bridge, **kwargs) >>> > > File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork >>> > > bridged=bridged, **options) >>> > > File "/usr/share/vdsm/configNetwork.py", line 823, in >>> > > _addNetworkValidation >>> > > "Specified netmask or gateway but not ip") >>> > > ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') >>> > > >>> > > ret=22 >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1055 makeBridge >>> > > return. >>> > > Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 729 addNetwork >>> > > error >>> > > trying to add management bridge >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 278 <BSTRAP >>> > > component='SetNetworking' status='FAIL' message='addNetwork error >>> > > t$ >>> > > Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 1023 setNetworking >>> > > test >>> > > failed >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1140 <BSTRAP >>> > > component='RHEV_INSTALL' status='FAIL'/> >>> > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1142 **** End VDS >>> > > Validation **** >>> > > >>> > > >>> > > *** END LOG *** >>> > > >>> > > >>> > > >>> > > I have tried googling myself to an answer, and i have tried finding >>> > > it out >>> > > myself but with no luck. >>> > > >>> > > >>> > > (the host is the same one as the engine is running on) >>> > > >>> > > Please, any help would be appreciated. >>> > > >>> > > >>> > > Kind regards >>> > >>> > > _______________________________________________ >>> > > Users mailing list >>> > > Users(a)ovirt.org >>> > > http://lists.ovirt.org/mailman/listinfo/users >>> > >>> > _______________________________________________ >>> > Users mailing list >>> > Users(a)ovirt.org >>> > http://lists.ovirt.org/mailman/listinfo/users >>> > >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> >> >

4 9

[Users] HowTo: Spice ActiveX Plugin/Virt Viewer Console on oVirt 3.1
by Dead Horse 13 Mar '13

13 Mar '13

I have seen this question asked many times on this list and the spice-devel list. Now having figured out how to make it work I will provide the answer to the rest of the community. *NOTE* this only applies to Windows/Internet Explorer users. There exists no other option other than the html5 spice console (still beta/in development) for windows users ATM. This will also only work with Internet Explorer. Basic Steps: - Install an oVirt server. - Add at least one node - Setup storage/iso/export domains Advanced steps - Start by downloading: http://elmarco.fedorapeople.org/spice.cab - Create a directory for it oVirt looks by default in /usr/share/spice - Rename spice.cab to SpiceX.cab and copy it into /usr/share/spice - Now edit /usr/share/ovirt-engine/engine.ear/root.war/WEB-INF and add the following:  <servlet> <servlet-name>SpiceX.cab</servlet-name> <servlet-class>org.ovirt.engine.core.FileServlet</servlet-class> <init-param> <param-name>type</param-name> <param-value>application/octet-stream</param-value> </init-param> <init-param> <param-name>file</param-name> <param-value>/usr/share/spice/SpiceX.cab</param-value> </init-param> </servlet> <servlet-mapping> <servlet-name>SpiceX.cab</servlet-name> <url-pattern>/spice/SpiceX.cab</url-pattern> </servlet-mapping> - Next create an html file within /usr/share/ovirt-engine/engine.ear/root.war - In the example below an html file called "spice.html" - Copy/Paste the below into spice.html: <!DOCTYPE html> <html> <head> <title>SPICE Plugin Installer</title> <script type="text/javascript"> function installSpice() { try { document.getElementById('SpiceX').innerHTML = '<OBJECT id="SpiceX" codebase="/spice/SpiceX.cab" classid="clsid:ACD6D89C-938D-49B4-8E81-DDBD13F4B48A" width="0" height="0"></OBJECT>'; } catch (ex) { alert("Epic Fail!: " + ex.Description); } } </script> </head> <body> <p> <p><b id='SpiceX'>Spice ActiveX Plugin</b> </p> <button onclick='installSpice()'>Install Spice Plugin</button> </p> </body> </html> - Save the file - You will now need to restart the ovirt-engine service EG: systemctl restart ovirt-engine.service OR service ovirt-engine restart - The installer page will now be available at http://<url to ovirt server>/spice.html EX: http://ovirt.azeroth.net/spice.html - Navigate to that page and click the install button - IE will prompt you to deploy/install the SpiceX cabinet file - It may gripe about an unsigned or untrusted source, acknowledge this an proceed anyways - If the install succeeds the text "Spice ActiveX Plugin" on the page will change to blank (it's actually the plugin with null values) - The console button in the user and webadmin portals will now launch the new virt-viwer spice based console! Happy Spice Consoling to your VM's from Windows! *NOTE* To uninstall the plugin: - The below removes the add-on from IE (EG: removes knowledge of "application/x-spice") - pop a command terminal and type: On Windows XP: regsvr32 /u "C:\Documents and Settings\Administrator\Local Settings\Application Data\virt-viewer\bin\SpiceX.dll" On Windows 7 regsvr32 /u C:\Documents and Settings\Administrator\Local Settings\AppData\virt-viewer\bin\SpiceX.dll" - Next we need to remove the rest of virt-viewer - Go to add/remove programs and uninstall virt-viewer, this removes the rest of virt-viewer from the system

7 21

[Users] Failed to add gluster server
by suporte＠logicworks.pt 13 Mar '13

13 Mar '13

Hi, I just installed oVirt 3.2 than add a node 1 using fedora18, attach an iSCSI storage, and local ISO NFS, and the data center is alive. Than try to add a second node from the ISO ovirt-node-iso-2.6.1-20120228.fc18.iso, but get this error message: Failed to add gluster server node2.domain.com into cluster default. Gluster command[gluster peer probe 192.168.5.182] failed on server 192.168.5.181 On the second node I configured Optional password for adding Node through oVirt Engine UI On the engine when adding a new Host I add the values to Name, Address, and Root Password , and than get this error: Error: Cannot add host. SSH authentication failed, verify authentication parameters are correct (Username/password, public key etc). You may refer to the engine.log file for further details. I notice that I cannot login as root on the second node, so how can I add a node through oVirt Engine UI if it asks for a root password? What am I doing wrong? thanks

2 1

[Users] Possible migration from oVirt to RHEV?
by Bashar 12 Mar '13

12 Mar '13

Hello, Doing some RnD and was wondering if it's possible to move from Fedora/oVirt to RHEL/RHEV anytime in future for a production system if required. >From the technical possibility point of view. Thanks, -B

5 5

[Users] CFP reminder for Shanghai
by Theron Conrey 12 Mar '13

12 Mar '13

one or two folks have commented on the fact they didn't see the last CFP email that was sent out. I thought I'd repost it here. I'm looking forward to getting some more submissions and we hope that we'll see you in Shanghai! ---------------------- Hi Everyone, We are actively seeking speakers for the oVirt workshop which will be held on Intel's Shanghai Campus, 8-9 May 2013. We are interested in talks in the following areas: * Getting started developing oVirt * oVirt for the systems administrator * Where oVirt fits in the enterprise * Gluster Integration * leveraging oVirt for Gluster deployments * Case studies on cost savings with oVirt and Open Source data center virtualization * Troubleshooting oVirt * Hardware optimizations for virtualization * oVirt Plugin development * oVirt architecture from a security and best practices point of view. * oVirt Project Roadmaps * Deep dives into features/areas * Deep dives into code/debugging Please submit talk proposals for review by sending an email to workshop-pc at ovirt.org. Please include your full name, speaker biography and your talk abstract. We will accept submissions through Friday, 29 March 2013 at 23:59 PST. Speakers will be notified of acceptance by Monday, 8 April 2013. Accepted speakers should plan to submit their slides to the workshop-pc at ovirt.org mailing list no later than close of business on Monday, 22 April 2013. Registration can be found here: http://ovirtshanghai2013.eventbrite.com/ Hotel and lodging information can be found here: http://www.ovirt.org/Intel_Workshop_May_2013 Keep your eyes open for further announcements! Thank you all for your participation! -- Theron Conrey Open Source and Standards, Red Hat @theronconrey (initial thread was here: http://lists.ovirt.org/pipermail/users/2013-March/012862.html)

1 0

[Users] Upgrade 3.1 to 3.2
by Neil 12 Mar '13

12 Mar '13

Hi guys, Does anyone have any successful upgrades from 3.1 to 3.2 using Centos 6.3 and the Dreyou repos? I'm using ovirt 3.1 on our own production systems and would like to know the recommended upgrade methods/paths. I don't see much in the way of upgrade paths for any distributions for that matter. I've done quite a lot of googling and can't find much, also checked on the ovirt website for any possible guides or methods without much success. Thanks in advance. Regards. Neil Wilson.

4 7

[Users] ovirt 3.1 all-in-one setup fail
by Alex Leonhardt 12 Mar '13

12 Mar '13

Hi, since 3.2 all-in-one setup failed on centos 6.3, i tried 3.1 instead today, unfortunately, again failing at the point when adding the host to the cluster with this time this error : 2013-03-12 11:06:59::ERROR::all_in_one_100::206::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 204, in initAPI password=controller.CONF['AUTH_PASS']) File "/usr/lib/python2.6/site-packages/ovirtsdk/api.py", line 88, in __init__ debug=debug File "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/connectionspool.py", line 49, in __init__ debug=debug)) File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 38, in __init__ timeout=timeout) File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 106, in __createConnection raise NoCertificatesError NoCertificatesError: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. 2013-03-12 11:06:59::DEBUG::setup_sequences::62::root:: Traceback (most recent call last): File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run function() File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 207, in initAPI raise Exception(ERROR_CREATE_API_OBJECT) Exception: Error: could not create ovirtsdk API object Alex -- | RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |

2 3

Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop."
by Yuval M 12 Mar '13

12 Mar '13

> Thank you very much for your response. > I did what you suggested and I still get the same exception when trying to enter the administrative portal (I attached the screenshot). > In addition, I see that the ui-plugins directory is empty after restarting the engine-service, so it might not have been used. > > [wil@bufferoverflow ~]$ mkdir -p /home/wil/ovirt-engine/installation/share/ui-plugins > [wil@bufferoverflow ~]$ ls -la /home/wil/ovirt-engine/installation/share/ > total 28 > drwxr-xr-x. 7 wil wil 4096 Mar 11 15:01 . > drwxr-xr-x. 6 wil wil 4096 Mar 8 22:19 .. > drwxr-xr-x. 3 wil wil 4096 Mar 8 22:19 java > drwxr-xr-x. 3 wil wil 4096 Mar 8 22:19 man > drwxr-xr-x. 2 wil wil 4096 Mar 8 22:19 maven-poms > drwxr-xr-x. 11 wil wil 4096 Mar 8 22:19 ovirt-engine > drwxrwxr-x. 2 wil wil 4096 Mar 11 15:01 ui-plugins > [wil@bufferoverflow ~]$ ls /home/wil/ovirt-engine/installation/share/ui-plugins/ > total 8 > drwxrwxr-x. 2 wil wil 4096 Mar 11 15:01 . > drwxr-xr-x. 7 wil wil 4096 Mar 11 15:01 .. > [wil@bufferoverflow ~]$ > > > > > > > > On Mon, Mar 11, 2013 at 9:42 AM, Juan Hernandez <jhernand(a)redhat.com> wrote: >> >> On 03/08/2013 09:48 PM, Yuval M wrote: >>> >>> Thank you very much. I now get the welcome page when I enter >>> "http://localhost:8700/". >>> However, when I try to enter the Administrator Portal >>> <http://localhost:8700/webadmin> I get a javax.servlet.ServletException. >>> I attached a screenshot. >>> >>> Inline image 1 >>> >>> How can I troubleshoot this? >> >> >> I think this is because of the missing UI plugins directory. Try to create it: >> >> mkdir -p $HOME/ovirt-engine/installation/share/ui-plugins >> >> Then restart the engine. >> >>> >>> I appreciate your help very much >>> >>> Yuval >>> >>> >>> On Fri, Mar 8, 2013 at 8:05 PM, Juan Hernandez <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com>> wrote: >>> >>> On 03/08/2013 07:00 PM, Yuval M wrote: >>> >>> I attached the logs, here is the output from the commands you >>> suggested: >>> >>> >>> Looks like the database schema doesn't match the rest of the code. >>> You probably created the database before switching to branch 3.2. >>> Just drop the database and create it again with the scripts in the >>> 3.2 branch. >>> >>> * >>> * >>> *[root@bufferoverflow bin]# psql -U postgres engine* >>> >>> psql (9.2.3) >>> Type "help" for help. >>> engine=# select count(*) from vdc_options; >>> count >>> ------- >>> 345 >>> (1 row) >>> >>> *[root@bufferoverflow bin]# find >>> /home/wil/ovirt-engine/__installation >>> >>> -name postgresql.jar* >>> *[root@bufferoverflow bin]# find >>> /home/wil/ovirt-engine/__installation >>> -name postg\** >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar.index >>> >>> *[root@bufferoverflow bin]# ls -la >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/* >>> >>> >>> total 12 >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 . >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 postgresql >>> *[root@bufferoverflow bin]# ls -la >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/* >>> >>> >>> total 544 >>> drwxr-xr-x. 2 wil wil 4096 Mar 8 18:46 . >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. >>> -rw-r--r--. 1 wil wil 307 Mar 8 18:03 module.xml >>> -rw-rw-r--. 1 wil wil 539705 Mar 7 16:41 postgresql-jdbc.jar >>> -rw-rw-r--. 1 wil wil 545 Mar 8 18:46 postgresql-jdbc.jar.index >>> >>> >>> I appreciate your help >>> >>> Yuval >>> >>> On Fri, Mar 8, 2013 at 7:44 PM, Juan Hernandez >>> <jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: >>> >>> On 03/08/2013 06:38 PM, Yuval M wrote: >>> >>> Thanks, now "./engine-service start" succeeded. >>> /[root@bufferoverflow bin]# ./engine-service start/ >>> /Starting engine-service: >>> [ >>> OK ]/ >>> >>> >>> However, when I try to access "http://localhost:8700" I >>> get an empty >>> page (0 bytes). >>> >>> I see the following errors in >>> >>> /home/wil/ovirt-engine/____installation/var/log/ovirt-____engine/server.log >>> >>> >>> >>> JBAS014777: Services which failed to start: service >>> >>> jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: >>> org.jboss.msc.service.____StartException in service >>> >>> jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: >>> >>> >>> Failed to start service >>> >>> 2013-03-08 19:27:51,495 ERROR >>> [org.jboss.as.server.____deployment.scanner] >>> >>> >>> (DeploymentScanner-threads - 1) {"JBAS014653: Composite >>> operation failed >>> and was rolled back. Steps that failed:" => {"Operation >>> step-2" => >>> {"JBAS014671: Failed services" => >>> >>> {"jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.__jar\__".component.____UsersDomainsCacheManagerServic____e.START" >>> => "org.jboss.msc.service.____StartException in service >>> >>> jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.jar\____".component.____UsersDomainsCacheManagerServic____e.START: >>> >>> >>> Failed to start service"}}}} >>> >>> Here is the contents of my configuration file: >>> >>> [root@bufferoverflow installation]# cat >>> etc/sysconfig/ovirt-engine >>> # >>> # For descriptions of the parameters and their default >>> values look >>> # at the >>> /usr/share/ovirt-engine/conf/____engine.conf.defaults file. >>> >>> >>> # >>> # Please note that the engine installation tool >>> engine-setup will >>> # append the modified parameters to the end of this file. >>> # >>> JAVA_HOME=/usr/lib/jvm/jre-1.____7.0-openjdk.x86_64 >>> JBOSS_HOME=/home/wil/ovirt-____engine/jboss-as-7.1.1.Final >>> >>> >>> ENGINE_USER=wil >>> ENGINE_GROUP=wil >>> ENGINE_PROXY_ENABLED=false >>> ENGINE_HTTP_ENABLED=true >>> ENGINE_HTTP_PORT=8700 >>> ENGINE_HTTPS_ENABLED=false >>> ENGINE_AJP_ENABLED=false >>> ENGINE_DB_USER=postgres >>> ENGINE_DB_PASSWORD= >>> ENGINE_DEBUG_ADDRESS=0.0.0.0:____8787 < http://0.0.0.0:8787> >>> >>> >>> <http://0.0.0.0:8787> >>> >>> >>> Thank you very much for your help >>> >>> >>> Can you share the server.log and engine.log files? If >>> possible stop >>> the engine, clean the files, start again and then collect and >>> provide the files. >>> >>> Not sure, but I guess that you are having some problem with the >>> database, so please check the following: >>> >>> 1. Try to connect to the database manually: >>> >>> psql -U postgres engine >>> engine# select count(*) from vdc_options; >>> >>> 2. Make sure that the JDBC driver is in the right place and >>> that it >>> points to the right file if it is a symbolic link: >>> >>> find home/wil/ovirt-engine/____installation -name >>> >>> postgresql.jar >>> >>> >>> >>> Yuval >>> >>> On Fri, Mar 8, 2013 at 6:16 PM, Juan Hernandez >>> <jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>> wrote: >>> >>> On 03/08/2013 05:14 PM, Yuval M wrote: >>> >>> checked out to 3.2 branch, now the >>> configuration file >>> was as >>> detailed in >>> the wiki. >>> after configuring it I try to start the engine >>> and get: >>> >>> [wil@bufferoverflow bin]$ pwd >>> /home/wil/ovirt-engine/______installation/bin >>> >>> >>> >>> [wil@bufferoverflow bin]$ ./engine-service start >>> Traceback (most recent call last): >>> File "./engine-service", line 23, in <module> >>> import configobj >>> ImportError: No module named configobj >>> [wil@bufferoverflow bin]$ >>> >>> >>> Ok, this is because the service script needs the >>> python-configobj >>> and python-cheetah packages: >>> >>> yum install python-configobj python-cheetah >>> >>> >>> >>> >>> On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__> wrote: >>> >>> On 03/08/2013 03:51 PM, Juan Hernandez wrote: >>> >>> On 03/08/2013 03:49 PM, Yuval M wrote: >>> >>> OK, >>> brand new machine, >>> Fedora 18 (x64), >>> Trying to install Ovirt 3.2 from >>> sources >>> according to: >>> http://www.ovirt.org/Building___________Engine_Draft >>> <http://www.ovirt.org/Building_________Engine_Draft> >>> <http://www.ovirt.org/__Building_______Engine_Draft >>> <http://www.ovirt.org/Building_______Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_____Engine_Draft >>> <http://www.ovirt.org/__Building_____Engine_Draft> >>> <http://www.ovirt.org/__Building_____Engine_Draft >>> <http://www.ovirt.org/Building_____Engine_Draft>>> >>> >>> <http://www.ovirt.org/______Building___Engine_Draft >>> <http://www.ovirt.org/____Building___Engine_Draft> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft> >>> <http://www.ovirt.org/__Building___Engine_Draft >>> <http://www.ovirt.org/Building___Engine_Draft>>>> >>> >>> <http://www.ovirt.org/________Building_Engine_Draft >>> <http://www.ovirt.org/______Building_Engine_Draft> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>>> >>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft> >>> <http://www.ovirt.org/__Building_Engine_Draft >>> <http://www.ovirt.org/Building_Engine_Draft>>>>> >>> >>> Everything is good up to the >>> following stage: >>> "Now you need to do some >>> adjustments to the >>> configuration file >>> >>> >>> >>> $HOME/ovirt-engine/________installation/etc/sysconfig/________ovirt-engine" >>> >>> >>> >>> >>> >>> The "sysconfig" directory does >>> not exist. >>> so does the >>> "ovirt-engine" >>> configuration file (searched >>> through the >>> $HOME/ovirt-engine >>> tree). >>> I didn't find any code in the >>> Makefile >>> >>> ($HOME/ovirt-engine/________repository/Makefile) that >>> >>> >>> >>> would create >>> >>> them, >>> What am I missing? >>> >>> >>> This has changed recently and I >>> didn't update >>> that wiki >>> page. The >>> /etc/sysconig/ovirt-engine file has been >>> replaced by >>> /etc/ovirt-engine/engine.conf. >>> >>> >>> But wait, this change was made in the master >>> branch, not in >>> 3.2, so >>> it shouldn't be a problem. Are you sure >>> you are >>> using the >>> engine_3.2 >>> branch? >>> >>> >>> Thanks, >>> >>> Yuval >>> >>> On Tue, Feb 26, 2013 at 3:25 PM, Juan >>> Hernandez >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__>__> >>> >>> >>> >>> wrote: >>> >>> On 02/26/2013 02:19 PM, Doron >>> Fediuck wrote: >>> >>> >>> >>> ----- Original Message >>> ----- >>> >>> From: "Yuval M" >>> <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>>> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>> >>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com >>>>>> >>> >>> >>> To: "Juan Hernandez" >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>> >>> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__>__>__, users(a)ovirt.org >>> >>> <mailto:users@ovirt.org> >>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> >>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>>>> >>> >>> >>> Cc: "Limor Gavish" >>> <lgavish(a)gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com>>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>> >>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com>>> >>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com >>>>>> >>> >>> >>> Sent: Sunday, >>> February 24, 2013 >>> 11:38:12 PM >>> Subject: Re: >>> [Users] Trouble >>> building >>> Ovirt >>> from source - >>> "No rule to make target >>> `install_tools'. Stop." >>> >>> >>> >>> >>> Still having >>> trouble with >>> the build >>> process >>> (Ovirt 3.1): >>> $ sudo make >>> ... (success) ... >>> $ sudo make install ... >>> >>> inflating: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/______META-__INF/maven/__org.__ovirt.____engine.ui/______webadmin/pom.xml >>> inflating: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/____404.____html >>> checkdir error: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar >>> >>> >>> >>> >>> exists but >>> is not directory >>> unable to process >>> >>> >>> >>> >>> engine-bll.jar/org/ovirt/__________engine/core/bll/VdsDeploy$__32.________class. >>> checkdir error: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar >>> >>> >>> >>> >>> exists but >>> is not directory >>> unable to process >>> >>> >>> >>> >>> engine-bll.jar/org/ovirt/__________engine/core/bll/__________InitBackendServicesOnStartupBe__________an.class. >>> >>> >>> >>> >>> ... >>> make: *** >>> [install_artifacts] Error 2 >>> >>> >>> >>> >>> any insights? >>> >>> >>> Thanks... >>> >>> >>> >>> On Thu, Jan 24, >>> 2013 at 8:52 >>> PM, Juan >>> Hernandez < >>> jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__> >>> >>> >>> >>> wrote: >>> >>> >>> >>> >>> >>> On 01/24/2013 04:20 PM, >>> Yuval M wrote: >>> >>> >>> Hi, >>> I'm installing >>> Ovirt 3.1 on >>> Fedora >>> using this >>> guide: >>> http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- >>> >>> config_.26_engine-manage- >>> domains >>> >>> and I'm getting the >>> error in the >>> subject from >>> make. >>> there is indeed no >>> rule for >>> install_tools in >>> the makefile. >>> >>> What am I missing? >>> >>> Those instructions >>> are out >>> of date, >>> use "make >>> install". That >>> installs >>> the files, but you will >>> still need some >>> changes to make the >>> engine >>> work: >>> >>> 1. Create the ovirt >>> user >>> (the engine >>> runs by >>> default with this >>> service, unless you >>> change the >>> /etc/syscofig/ovirt-engine >>> file and >>> add the ENGINE_USER and >>> ENGINE_GROUP >>> parameters): >>> >>> useradd ovirt >>> >>> 2. Create (mkdir -p >>> ...) and >>> change the >>> ownership of the >>> directories >>> that the engine >>> needs to own to >>> ovirt:ovirt (chown >>> ovirt:ovirt ...): >>> >>> /etc/ovirt-engine >>> /var/log/ovirt-engine >>> /var/lock/ovirt-engine >>> >>> /var/lib/ovirt-engine/content >>> /var/lib/ovirt-engine/ >>> deployments >>> /var/tmp/ovirt-engine >>> /var/cache/ovirt-engine >>> >>> 3. Enable the HTTP >>> connector >>> in the >>> engine >>> (the default is >>> to enable >>> only AJP, and that >>> doesn't work >>> without Apache >>> as frontend) >>> adding >>> the following to the >>> /etc/sysconfig/ovirt-engine file: >>> >>> >>> ENGINE_PROXY_ENABLED=false >>> >>> ENGINE_HTTP_ENABLED=true >>> ENGINE_HTTP_PORT=8700 >>> >>> ENGINE_HTTPS_ENABLED=false >>> >>> ENGINE_AJP_ENABLED=false >>> >>> 4. Configure >>> database connection >>> details (the >>> default in >>> development >>> environments is to >>> use the >>> postgres >>> user and >>> the trust mode) >>> adding >>> this to >>> /etc/sysconfig/ovirt-engine: >>> >>> ENGINE_DB_USER=postgres >>> ENGINE_DB_PASSWORD= >>> >>> 5. Make sure that >>> you have the >>> PostgreSQL JDBC >>> driver >>> installed (rpm >>> -q postgresql-jdbc) and >>> install it if >>> needed >>> (yum install >>> postgresql-jdbc). >>> >>> 6. Now you can >>> start the engine >>> running the >>> engine-service >>> script: >>> >>> engine-service start >>> >>> Look at the system >>> log (the file >>> /var/log/messages) and the >>> engine >>> logs (the files >>> /var/log/ovirt-engine/server. >>> log and >>> >>> /var/log/ovirt-engine) for >>> errors. >>> >>> 7. Connect to >>> http://localhost:8700 >>> and you >>> should be able >>> to login >>> with user admin and >>> letmein! >>> as password. >>> >>> Note that I am >>> assuming that >>> you already >>> created the >>> database, and >>> that you want to >>> use this >>> installation for >>> development. If >>> you are >>> looking for an >>> production >>> installation I >>> suggest using the RPMs. >>> >>> Also I tested this >>> with the >>> latest >>> source from the >>> repository, it >>> will not work with >>> older >>> versions. >>> >>> -- >>> Dirección >>> Comercial: C/Jose >>> Bardasano >>> Baos, 9, >>> Edif. Gorbea >>> 3, planta >>> 3ºD, 28016 Madrid, >>> Spain >>> Inscrita en el Reg. >>> Mercantil de Madrid – >>> C.I.F. B82657941 - >>> Red Hat >>> S.L. >>> >>> >>> >>> Any progress here? >>> >>> >>> Yuval, that will not work >>> with 3.1. >>> Please >>> use 3.2 and >>> the following >>> instructions: >>> >>> http://www.ovirt.org/Building___________Engine_Draft >>> <http://www.ovirt.org/Building_________Engine_Draft> >>> <http://www.ovirt.org/__Building_______Engine_Draft >>> <http://www.ovirt.org/Building_______Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_____Engine_Draft >>> <http://www.ovirt.org/__Building_____Engine_Draft> >>> <http://www.ovirt.org/__Building_____Engine_Draft >>> <http://www.ovirt.org/Building_____Engine_Draft>>> >>> >>> <http://www.ovirt.org/______Building___Engine_Draft >>> <http://www.ovirt.org/____Building___Engine_Draft> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft> >>> <http://www.ovirt.org/__Building___Engine_Draft >>> <http://www.ovirt.org/Building___Engine_Draft>>>> >>> >>> >>> <http://www.ovirt.org/________Building_Engine_Draft >>> <http://www.ovirt.org/______Building_Engine_Draft> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>>> >>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft> >>> <http://www.ovirt.org/__Building_Engine_Draft >>> <http://www.ovirt.org/Building_Engine_Draft>>>>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose >>> Bardasano Baos, >>> 9, Edif. >>> Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. >>> Mercantil de >>> Madrid – C.I.F. >>> B82657941 - Red Hat >>> S.L. >>> >>> >>> >>> >>> >>> _______________________________________________________ >>> >>> >>> Users mailing list >>> Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>>>> >>> http://lists.ovirt.org/________mailman/listinfo/users >>> <http://lists.ovirt.org/______mailman/listinfo/users> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users>> >>> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users>>> >>> >>> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users>> >>> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users> >>> <http://lists.ovirt.org/__mailman/listinfo/users >>> <http://lists.ovirt.org/mailman/listinfo/users>>>> >>> >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano >>> Baos, 9, >>> Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – >>> C.I.F. >>> B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, >>> Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. >>> B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat >>> S.L. >>> >>> >> >> >> -- >> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain >> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. > >

2 5

Re: [Users] Users Digest, Vol 18, Issue 79
by xianghuadu 12 Mar '13

12 Mar '13

This is a multi-part message in MIME format. ------=_001_NextPart141836543370_=---- Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SEkNCiAgICAgIEkgd2FudCB0byBhc2sgeW91IGEgcXVlc3Rpb25zIGFib3V0IHRoZSBvdmlydCBz dG9yZSwgd2hlbiBJIGRpZG4ndCB1c2Ugb3ZpcnQsIEkgaGFkIGJ1aWx0IHVwIGJhc2VkIG9uIEtW TSB2aXJ0dWFsaXphdGlvbiBwbGF0Zm9ybS4gSXMgcHJvdmlkZWQgdGhyb3VnaCB0aGUgaXNjc2kg c3RvcmFnZSBzcGFjZS4NCk5vdyBJIHdhbnQgdG8gaW4gdGhlIGRlcGxveW1lbnQgb2YgdmlydHVh bGl6YXRpb24gcGxhdGZvcm1zIG92aXJ0IHBsYXRmb3JtIG1hbmFnZW1lbnQuIEJlZm9yZSBidXQg SSBmb3VuZCB0aGF0IGhhdmUgbm90IGJlZW4gYWJsZSB0byBhZGQgcGFydGl0aW9uIHRvIEtWTSBs dW4sIA0KYWx3YXlzIHByb21wdCBzYWlkOiAiVGhlIGZvbGxvd2luZyBMVU5zIGFyZSBhbHJlYWR5 IGluIHVzZQ0KV2hlbiBJIGNob29zZSB0byBBcHByb3ZlIGFmdGVyIG9wZXJhdGlvbiBhbHdheXMg Y29tcGxhaW5zOiBFcnJvciB3aGlsZSBleGVjdXRpbmcgdGhlIGFjdGlvbiBOZXcgU0FOIFN0b3Jh Z2UgRG9tYWluOiBFcnJvciBjcmVhdGluZyBhIFN0b3JhZ2UgRG9tYWluDQpXaGV0aGVyIG92aXJ0 IGJlZm9yZSBjYW4ndCB1c2UgdGhlIGRpdmlzaW9uIG9mIGx1bnMgdG8gdGhlIEtWTSwgb3IgbmVl ZCB0byBvdGhlciBTZXR0aW5ncy4NCkhvcGUgdG8gZ2V0IHlvdSBoZWxwLCB0aGFuayB5b3UgdmVy eSBtdWNoIQ== ------=_001_NextPart141836543370_=---- Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3DGB2312" http-equiv=3DContent-Type> <STYLE> BLOCKQUOTE { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px; MARGIN-LEFT: 2em } OL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } UL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } BODY { LINE-HEIGHT: 1.5; FONT-FAMILY: =CE=A2=C8=ED=D1=C5=BA=DA; COLOR: #000080; = FONT-SIZE: 10.5pt } </STYLE> <META name=3DGENERATOR content=3D"MSHTML 8.00.7601.17744"></HEAD> <BODY style=3D"MARGIN: 10px"> <DIV> <DIV>HI</DIV> <DIV>     =20 I want to ask you a questions about&nbs= p;the ovirt store, when I didn't use ov= irt, I had built up based on KVM v= irtualization platform. Is provided through the&n= bsp;iscsi storage space.</DIV> <DIV>Now I want to in the deployment of=  virtualization platforms ovirt platform manageme= nt. Before but I found that have not&nb= sp;been able to add partition to KVM lu= n, </DIV> <DIV>always prompt said: "<SPAN=20 style=3D"COLOR: #ff0000">The following LUNs are alread= y in use</SPAN></DIV> <DIV>When I choose to Approve after operatio= n always complains: <SPAN=20 style=3D"COLOR: #ff0000">Error while executing the act= ion New SAN Storage Domain: Error creating&n= bsp;a Storage Domain</SPAN></DIV> <DIV>Whether ovirt before can't use the divi= sion of luns to the KVM, or need t= o other Settings.</DIV> <DIV>Hope to get you help, thank you ve= ry much!</DIV></DIV></BODY></HTML> ------=_001_NextPart141836543370_=------

3 3

[Users] OpenLDAP Simple Authentication in Ovirt Engine
by Thierry Kauffmann 12 Mar '13

12 Mar '13

>> Hi, >> >> I am currently testing Ovirt 3.1 standalone on Fedora 17. >> >> Until now, I could only use the default user admin@internal. >> >> Our Directory at the University is OpenLDAP. We use it for authentication >> WITHOUT Kerberos : Simple authentication. >> >> I wonder how to use this backend to authenticate users and manage groups >> in Ovirt. >> >> Has anyone already set this up ? >> How to configure Ovirt to use Simple Authentication (No Kerberos). >> >> Cheers, >> >> -- >> Thierry Kauffmann >> Chef du Service Informatique // Facult? des Sciences // Universit? de >> Montpellier 2 >> >> [image: SIF - Service Informatique de la Facult? des Sciences]<http://sif.info-ufr.univ-montp2.fr/> [image: >> UM2 - Universit? de Montpellier 2] <http://www.univ-montp2.fr/> Service >> informatique de la Facult? des Sciences (SIF) >> Universit? de Montpellier 2 >> CC437 // Place Eug?ne Bataillon // 34095 Montpellier Cedex 5 >> >> T?l : 04 67 14 31 58 >> email : thierry.kauffmann(a)univ-montp2.fr >> web : http://sif.info-ufr.univ-montp2.fr/ >> http://www.fdsweb.univ-montp2.fr/ >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > Hi, > > This is a response from an older thread from Yair Zaslavsky: > > " there is no code allowing to add simple-authentication domains to > Manage-Domains. > In the past we did have the ability to do that, but there are several > problematic issues." > > Best regards, Hi, correct-me if I am wrong but this wiki page (http://www.ovirt.org/DomainInfrastructure) states clearly : > 1. Authenticating Active Directory, IPA and RHDS using either simple > or gssapi authentication > 2. Querying the directory using the LDAP protocol > 3. Auto deducing the LDAP provider type > 4. Easily adding new LDAP provider types > 5. Easily adding new query types > So what ? -- signature-TK Thierry Kauffmann Chef du Service Informatique // Faculté des Sciences // Université de Montpellier 2 SIF - Service Informatique de la Faculté des Sciences <http://sif.info-ufr.univ-montp2.fr/> UM2 - Université de Montpellier 2 <http://www.univ-montp2.fr/> Service informatique de la Faculté des Sciences (SIF) Université de Montpellier 2 CC437 // Place Eugène Bataillon // 34095 Montpellier Cedex 5 Tél : 04 67 14 31 58 email : thierry.kauffmann(a)univ-montp2.fr <mailto:thierry.kauffmann@univ-montp2.fr> web : http://sif.info-ufr.univ-montp2.fr/ http://www.fdsweb.univ-montp2.fr/

7 11