- Users - oVirt List Archives

[Users] info on logs regarding tasks..
by Gianluca Cecchi 21 Feb '13

21 Feb '13

Hello, on oVirt 3.2 I successfully tested disk moving for a powered off windows 7 VM (I'm going to try powered on case later). Storage As soon as the operation starts, I can see its details on task section at bottom board. But when it completes I then am unable to see in events any information, for example to track down duration. Any info on where can I find in Webadmin GUI this kind of information? Thanks, Gianluca

3 3

[Users] Flush old logs
by Nicolas Ecarnot 21 Feb '13

21 Feb '13

Hi, I'd like first to thank people of this mailing list for there help and advices - I learned a lot by reading your archive. Here's a simple question : In the "Alerts" message queue at the bottom of the screen, I see an error message dating from two weeks (about the failure to verify to restart status of a host). I'm pretty sure this shouldn't be there anymore, as the power management of this host has already been tested and approved many times since. I haven't find any trivial way to flush this message queue, and I was wondering whether it was stored in a database? Is there a way to clear these error messages? (Am I right with the db location?) Regards, -- Nicolas Ecarnot

2 4

[Users] oVirt 3.2 - Problem configuring Node.
by Josué Delgado 21 Feb '13

21 Feb '13

Hello, I did a fresh install with 3.2 GA release and since i had problems with ovirt-node, i decided to install a minimum fedora 18. When i tried to add that node on the webadmin interface, i got this error: "Host xxxxxx installation failed. Unexpected connection termination." I have this message on logs: "2013-02-21 09:54:41,650 INFO [org.apache.sshd.common.util.SecurityUtils] (pool-3-thread-4) BouncyCastle not registered, using the default JCE provider 2013-02-21 09:54:41,746 INFO [org.apache.sshd.client.session.ClientSessionImpl] (NioProcessor-2) Session created... 2013-02-21 09:54:41,782 INFO [org.apache.sshd.client.session.ClientSessionImpl] (NioProcessor-2) Server version string: SSH-2.0-OpenSSH_6.1 2013-02-21 09:54:41,786 INFO [org.apache.sshd.client.session.ClientSessionImpl] (NioProcessor-2) Received SSH_MSG_KEXINIT 2013-02-21 09:54:41,807 INFO [org.apache.sshd.client.kex.DHG1] (NioProcessor-2) Send SSH_MSG_KEXDH_INIT 2013-02-21 09:54:41,814 INFO [org.apache.sshd.client.kex.DHG1] (NioProcessor-2) Received SSH_MSG_KEXDH_REPLY 2013-02-21 09:54:41,826 INFO [org.apache.sshd.client.session.ClientSessionImpl] (NioProcessor-2) Received SSH_MSG_NEWKEYS 2013-02-21 09:54:41,830 INFO [org.apache.sshd.client.session.ClientSessionImpl] (NioProcessor-2) Send SSH_MSG_SERVICE_REQUEST for ssh-userauth 2013-02-21 09:54:41,912 INFO [org.apache.sshd.client.auth.UserAuthPassword] (pool-3-thread-4) Send SSH_MSG_USERAUTH_REQUEST for password 2013-02-21 09:54:48,696 INFO [org.apache.sshd.client.auth.UserAuthPassword] (NioProcessor-2) Received SSH_MSG_USERAUTH_SUCCESS 2013-02-21 09:54:48,753 INFO [org.apache.sshd.client.channel.ChannelExec] (pool-3-thread-4) Send SSH_MSG_CHANNEL_OPEN on channel 0 2013-02-21 09:54:48,782 INFO [org.apache.sshd.client.channel.ChannelExec] (NioProcessor-2) Send SSH_MSG_CHANNEL_REQUEST exec 2013-02-21 09:54:48,823 INFO [org.apache.sshd.client.channel.ChannelExec] (NioProcessor-2) Received SSH_MSG_CHANNEL_REQUEST on channel 0 2013-02-21 09:54:48,838 INFO [org.apache.sshd.client.session.ClientSessionImpl] (NioProcessor-2) Session root@/192.168.218.228:22 closed" There's something that i missed? Many Tnkx. Regards, Josué Delgado

1 0

[Users] Lost our management server.. have DB backup but no /etc/pki/
by Saint Keimond 21 Feb '13

21 Feb '13

Hello, We lost our Fedora 17 server with ovirt 3.1 on it. We have a good database backup but do not have have any certificates. From what I read, it is possible to still do a restore.. we just have to rejoin all the nodes so that they get a new certificate. I've tried to bring the database in to a fresh 3.1 install and a fresh 3.2 install.. with no success on either. I need some helping figuring this out :) Thanks, David

6 8

[Users] Migration issue Asking For Help
by xianghuadu 21 Feb '13

21 Feb '13

This is a multi-part message in MIME format. ------=_001_NextPart781685242212_=---- Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 aGkgIGFsbA0KICAgICAgIEkgY29tZSBmcm9tIENoaW5hLCBNeSBuYW1lIGlzIGphY2sgDQogICAg ICAgSSByZWNlbnRseSBpbiB0aGUgcmVzZWFyY2ggb3ZpcnQgZW5jb3VudGVyIGEgcHJvYmxlbS4g DQpJbiB0aGUgdm0gbWlncmF0aW9uIG9jY3VycyB3aGVuIHRoZSBlcnJvcjogTWlncmF0aW9uIGZh aWxlZCBkdWUgdG8gRXJyb3I6IENvdWxkIG5vdCBjb25uZWN0IHRvIHBlZXIgaG9zdC4NCk15IGVu dmlyb25tZW50IGlzOg0KS1ZNICAgICAgICAgICAgIGRlbGwgMjk1MCAqIDINCnN0b3JhZ2UgICAg ICAgIGlzY3NpLXRhcmdldA0Kdm0gc3lzdGVtICAgIHdpbmRvd3MgMjAwOCByMg0KSG9wZSB0byBn ZXQgaGVscCAhISEhDQoNCg0KDQoNCnhpYW5naHVhZHU= ------=_001_NextPart781685242212_=---- Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Dgb2312" http-equiv=3DContent-Type> <STYLE> BLOCKQUOTE { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px; MARGIN-LEFT: 2em } OL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } UL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } BODY { LINE-HEIGHT: 1.5; FONT-FAMILY: =CE=A2=C8=ED=D1=C5=BA=DA; COLOR: #000000; = FONT-SIZE: 10.5pt } </STYLE> <META name=3DGENERATOR content=3D"MSHTML 8.00.7601.17744"></HEAD> <BODY style=3D"MARGIN: 10px"> <DIV>hi  all</DIV> <DIV>       I come from = China,=20 My name is jack </DIV> <DIV>      =20 I recently in the research ovirt encounter&n= bsp;a problem.=20 </DIV> <DIV=20 style=3D"TEXT-INDENT: 2em">In the vm migration occurs&= nbsp;when the error:=20 <U>Migration failed due to Error: Could not connect to peer host.</U></DIV= > <DIV style=3D"TEXT-INDENT: 2em">My environment is:</DIV> <DIV=20 style=3D"TEXT-INDENT: 2em">KVM       &n= bsp;     dell=20 2950 * 2</DIV> <DIV style=3D"TEXT-INDENT: 2em" sizcache09507295322888376=3D"9999" sizset= =3D"0"><SPAN=20 class=3Ddef sizcache09507295322888376=3D"8286"=20 sizset=3D"2">storage        iscsi-= target</SPAN></DIV> <DIV style=3D"TEXT-INDENT: 2em" sizcache09507295322888376=3D"9999" sizset= =3D"0"><SPAN=20 class=3Ddef sizcache09507295322888376=3D"8286" sizset=3D"2">vm=20 system    windows 2008 r2</SPAN></DIV> <DIV style=3D"TEXT-INDENT: 2em" sizcache09507295322888376=3D"9999" sizset= =3D"0"><SPAN=20 class=3Ddef sizcache09507295322888376=3D"8286"=20 sizset=3D"2">Hope to get help !!!!</SPAN></DIV> <DIV> </DIV> <HR style=3D"WIDTH: 210px; HEIGHT: 1px" align=3Dleft color=3D#b5c4df SIZE= =3D1> <DIV><SPAN>xianghuadu</SPAN></DIV></BODY></HTML> ------=_001_NextPart781685242212_=------

4 4

[Users] ovirt 3.2 host network interfaces
by Eduardo Ramos 20 Feb '13

20 Feb '13

Hi all! Today I installed the new oVirt 3.2 on CentOS 6.3 using www.dreyou.org repository and I liked so much. But, I'm having problems setting networks into physical interfaces of the hosts. On my production environment oVirt 3.1, I have several networks in my eth1 interface, but in the new one, I can't do the same. When I add a network to eth1, no other can be added to. The webadmin says me: No valid operation for network2 and eth1. How can I add several networks to the same eth? Thanks.

3 2

[Users] oVirt engine report and dwh in 3.2
by Gianluca Cecchi 20 Feb '13

20 Feb '13

Hello, updated my oVirt 3.2 beta all-in-one to 3.2 final. Then # yum install ovirt-engine-reports # ovirt-engine-dwh-setup # ovirt-engine-reports-setup All seems successful. The first time that I access the reports link from firefox I get a window about security and certificate, but where I cannot accept the certificate itself ("confirm exception" button remains greyed out) and so can't go ahead. I'm forced to kill firefox from a console and restart it because if I go in details window for certificate it spans all over my vertical screen length. Also with Alt+drag I cannot highlight the "cancel" button to exit the window..... Now when I click on reports link I get as in pre-3.2 Page: Reports is not a leagal. My databases now postgres=# \l List of databases Name | Owner | Encoding | Collate | Ctype | Access privileges ----------------------+----------+----------+-------------+-------------+----------------------- engine | engine | UTF8 | en_US.UTF-8 | en_US.UTF-8 | ovirt_engine_history | postgres | UTF8 | en_US.UTF-8 | en_US.UTF-8 | ovirtenginereports | postgres | UTF8 | en_US.UTF-8 | en_US.UTF-8 | postgres | postgres | UTF8 | en_US.UTF-8 | en_US.UTF-8 | output of commands: .... Installed: ovirt-engine-reports.noarch 0:3.2.0-1.fc18 Dependency Installed: jasperreports-server.noarch 0:4.7.0-1 ovirt-engine-dwh.noarch 0:3.2.0-1.fc18 postgresql-contrib.x86_64 0:9.2.3-1.fc18 uuid.x86_64 0:1.6.2-14.fc18 Dependency Updated: postgresql.x86_64 0:9.2.3-1.fc18 postgresql-libs.x86_64 0:9.2.3-1.fc18 postgresql-server.x86_64 0:9.2.3-1.fc18 Complete! # ovirt-engine-dwh-setup Setting DB connectivity... [ DONE ] Creating DB... [ DONE ] Starting ovirt-engine... [ DONE ] Starting oVirt-ETL... [ DONE ] Successfully installed ovirt-engine-dwh. The installation log file is available at: /var/log/ovirt-engine/ovirt-engine-dwh-setup-2013_02_19_00_16_15.log # ovirt-engine-reports-setup Welcome to ovirt-engine-reports setup utility Please choose a password for the admin users (ovirt-admin and superuser): Warning: Weak Password. Re-type password: Editing XML files... [ DONE ] Setting DB connectivity... [ DONE ] Deploying Server... [ DONE ] Updating Redirect Servlet... [ DONE ] Importing reports... [ DONE ] Customizing Server... [ DONE ] Running post setup steps... [ DONE ] Starting ovirt-engine... [ DONE ] Succesfully installed ovirt-engine-reports. The installation log file is available at: /var/log/ovirt-engine/ovirt-engine-reports-setup-2013_02_19_00_17_19.log dwh setup log: https://docs.google.com/file/d/0BwoPbcrMv8mvZHE5dGU3bWNDaEU/edit?usp=sharing reports setup log: https://docs.google.com/file/d/0BwoPbcrMv8mvMi10UnQ5bVY2VWc/edit?usp=sharing Any run-time log to view or service status to check? Thanks, Gianluca

5 13

Re: [Users] Thin Provisioning
by Dafna Ron 20 Feb '13

20 Feb '13

ok. so you have 1 NFS data domain which has a template on it and when you are trying to create a new vm you only have preallocated disk type. when you open the new vm dialogue, after you select the template, in the Resource allocation tab you need to select the clone radio button (its near the Template Provisioning). once you do that, the allocation policy scroll will become active and you will be able to select thin or preallocated. let me know if after you select the clone you still only have preallocated. On 02/20/2013 06:09 PM, Juan Jose wrote: > Hello Dafna, > > Are you want to say one NFS domain?, I have one for VM aand one isos. > > > On Wed, Feb 20, 2013 at 4:46 PM, Dafna Ron <dron(a)redhat.com > <mailto:dron@redhat.com>> wrote: > > do you have more than one domain? > > > On 02/20/2013 05:38 PM, Juan Jose wrote: > > Hello everybody, > > > > I'm following the Quick Start Guide to clone a machine from a > Template > > that it's already created. As thi guide says it's necessary to > select > > in Allocation tab from Resource Allocation, Thin Provision. When > I try > > to do this and down the select field it doesn't appear this > option, I > > only can see Preallocated. I have oVirt engine 3.1. Can somebody > give > > some light why I haven't this option in my webadmin? > > > > Many thanks in avanced, > > > > Juanjo. > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org <mailto:Users@ovirt.org> > > http://lists.ovirt.org/mailman/listinfo/users > > > -- > Dafna Ron > _______________________________________________ > Users mailing list > Users(a)ovirt.org <mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users > > -- Dafna Ron

1 0

[Users] oVirt Weekly Meeting Minutes -- 2013-02-20
by Mike Burns 20 Feb '13

20 Feb '13

Minutes: http://ovirt.org/meetings/ovirt/2013/ovirt.2013-02-20-15.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2013/ovirt.2013-02-20-15.00.txt Log: http://ovirt.org/meetings/ovirt/2013/ovirt.2013-02-20-15.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 15:00:12 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2013/ovirt.2013-02-20-15.00.log.html . Meeting summary --------------- * roll call and agenda (mburns, 15:00:19) * Agenda (mburns, 15:00:25) * Release update and planning (mburns, 15:00:38) * Sub-project reports (mburns, 15:00:39) * Workshops and Conferences (mburns, 15:00:44) * Other Topics (mburns, 15:00:54) * Release Update and Planning (mburns, 15:03:07) * oVirt 3.2 released on 14-Feb (mburns, 15:03:24) * some packages have already had some updates posted as well (mburns, 15:03:45) * ovirt-engine-reports, ovirt-engine-cli, ovirt-engine-sdk all updated this morning (mburns, 15:04:04) * some packages inadvertently missed during initial release -- cli, sdk had old packages, reports rpm was missing (mburns, 15:04:35) * those 3 were all fixed quickly after reporting they were missing (mburns, 15:04:53) * there is a possibility of an update to vdsm (which would cause ovirt-node to need a new version as well) (mburns, 15:05:22) * related to http://gerrit.ovirt.org/#/c/12053/ (mburns, 15:06:18) * vdsm 4.10.3-8.fc18 will be available in the ovirt.org repos today (mburns, 15:09:53) * ovirt-node respin will be done in the next couple days to include the new vdsm (mburns, 15:10:10) * vdsm 4.10.3-8 is now available in ovirt.org repos (mburns, 15:13:21) * oVirt 3.3 release planning (mburns, 15:13:54) * there will be a request sent shortly for new feature pages for oVirt 3.3 (mburns, 15:14:41) * initial tentative target for 3.3 GA: 01-July (mburns, 15:20:03) * tentative beta, dev freeze, branch date: 31-May (mburns, 15:22:28) * tentative RC build: -14-June (mburns, 15:23:10) * Tentative Test Day 5-June (mburns, 15:23:23) * ACTION: mburns to send request for feature list and feature pages for 3.3 to maintainers based on early July release (mburns, 15:26:21) * ACTION: mburns to also ask for project contacts for status updates (mburns, 15:26:49) * mgoldboi and dneary working on a more robust release process (mburns, 15:27:36) * Sub-Project Reports -- Infra (mburns, 15:30:09) * infra wants to run ovirt 3.2 on el6, but no packages yet (ewoud, 15:30:36) * work started on settings up alterway01.ovirt.org as a new jenkins master (ewoud, 15:31:00) * ongoing wiki issue is due to an issue on openshift, awaiting resolution (mburns, 15:33:31) * Sub-Project Reports -- Node (mburns, 15:34:22) * Node team is in planning for features for 2.7.0 releae (mburns, 15:34:36) * node team may look to disconnect from the oVirt Project schedule due to need to be tied to Fedora schedules (mburns, 15:35:35) * node team will continue to provide an ISO file that can be used with oVirt releases, just with the need to install a Plugin (mburns, 15:36:07) * plugin development for this is ongoing (mburns, 15:36:34) * this is being done to allow the node team to provide a more stable base image that multiple people can use (mburns, 15:37:37) * node team will be investigating an EL6 based image as well, but that is not imminent (mburns, 15:38:35) * Sub-Project Reports -- Engine (mburns, 15:40:35) * oschreib working on making el6 a reality (mburns, 15:40:53) * Sub-Project Reports -- vdsm (mburns, 15:43:09) * mburns attempted to build vdsm from src tarball, but failed (mburns, 15:43:22) * mburns to work with fsimonce to get it resolved (mburns, 15:43:31) * Workshops and Conferences (mburns, 15:43:47) * Workshop at Intel Campus in Shanghai is 8-9 May, CFP in progress (mburns, 15:44:51) * theron is working on this as a starter project but is currently in Tel Aviv this week meeting the team and getting up to speed, so we're a bit behind (mburns, 15:45:12) * theron and lh will be speaking with Susie Li at Intel on 4 March to nail down details of venue, etc. (mburns, 15:45:28) * We can accommodate 200 guests at the workshop and will take registrations via Eventbrite, which is accessible in China (mburns, 15:45:44) * Registration page will be created following call with Susie to nail down specifics (mburns, 15:45:53) * Other Topics (mburns, 15:47:18) * Workshops and Conferences (revisted) (mburns, 15:47:39) * Rydekull to do a presentation on oVirt -- Stockholm, March 5th, Free Open Source Software Stockholm(FOSS-sthlm) (mburns, 15:48:48) * LINK: http://www.foss-sthlm.se/mar2013.html (Rydekull, 15:48:51) * LINK: http://www.foss-sthlm.se/mar2013.html (mburns, 15:49:03) * Other Topics (mburns, 15:50:22) Meeting ended at 15:56:57 UTC. Action Items ------------ * mburns to send request for feature list and feature pages for 3.3 to maintainers based on early July release * mburns to also ask for project contacts for status updates Action Items, by person ----------------------- * mburns * mburns to send request for feature list and feature pages for 3.3 to maintainers based on early July release * mburns to also ask for project contacts for status updates * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (112) * Rydekull (20) * lh (14) * ovirtbot (12) * fsimonce (9) * oschreib (8) * ewoud (5) * mgoldboi (3) * jb_netapp (2) * ale1 (1) * YamaKasY (1) * dustins (1) * quaid (0) * theron (0) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

1 0

[Users] Thin Provisioning
by Juan Jose 20 Feb '13

20 Feb '13

Hello everybody, I'm following the Quick Start Guide to clone a machine from a Template that it's already created. As thi guide says it's necessary to select in Allocation tab from Resource Allocation, Thin Provision. When I try to do this and down the select field it doesn't appear this option, I only can see Preallocated. I have oVirt engine 3.1. Can somebody give some light why I haven't this option in my webadmin? Many thanks in avanced, Juanjo.

2 1