- Users - oVirt List Archives

[Users] ovirt3.1 update
by Royce Lv 01 Aug '12

01 Aug '12

Is ovirt 3.1 include this patch? commit e548c72ee1d9275d363c025ae8d61f4990a8445b Author: Eli Mesika <emesika(a)redhat.com> Date: Sun Jul 15 18:08:32 2012 +0300 I used the latest vdsm, and found create vm with cdrom failed because of this patch: commit 491fa1a5ea44b7502630a6eb34b140a6059d8db2 Author: Eli Mesika <emesika(a)redhat.com> Date: Sun Jul 15 18:22:11 2012 +0300 I guess the engine side should include patch e548c72e to make it work

2 1

[Users] How to force VM's to run on different hosts?
by Maxim Burgerhout 01 Aug '12

01 Aug '12

Hi, Can someone tell me whether setting positive and negative VM affinity rules will be at all possible with oVirt at some point in time, i.e. is this on the roadmap? I need to be able to tell VM's to run on different hosts, spread them around, so to speak. For example, domain controllers would be better off running on as many different hypervisors as possible, the way I see it. That way, the failure of a single hypervisor has minimal impact on the infrastructure. I know there is a feature to pin VM's to a single hypervisor, but that's not quite the same. I would like to group the domain controllers and then tell them not to run on the same host as other members of that group as much as possible. The other way around would be nice as well: have several VM's run on the same hardware. For example, a three tiered web application would probably perform better if the VM's are all on the same hypervisor. I know I could pin them all to the same hypervisor, but still: that's not quite the same. I want to be able to group the web app VM's and tell them to try to run on the same hypervisors as the other members of the group, so they can move to another hypervisor as a group if the need arises. Apologies if this has been asked before or documented in some place I haven't looked yet. Regards, Maxim Burgerhout <maxim(a)wzzrd.com>

3 4

[Users] storage...
by Johan Kragsterman 01 Aug '12

01 Aug '12

Hi! I'm just in process of setting up an ovirt environment again. Using ovirt node HV 2.3.0, on fibre channel storage. I'm forced to use Fedora 16, since Fedora 17 doesn't work with fibre channel storage or at least not with Qlogic HBA's. I've allready told the list and Fedora forum that. I asked some related questions before around fc storage with oVirt, and I will be back with more. Anyway, I set up the oVirt node HV on a single LUN of 2 Gb, I've done it before on 1 Gb, and I tried it on 200 Mb. 200 Mb was too small, because it stopped at 25% and didn't want to go further. But the installation started without reporting it beeing too small, which is a bit odd, isn't it? Anyway, 1 or 2 Gb works fine! When I enter the shell in the HV and run pvs the first time, I see this: [root@node1 admin]# pvs PV VG Fmt Attr PSize PFree /dev/mapper/3600144f0e03a46000000501798dd0001p4 HostVG lvm2 a-- 288.00m 0 PSize say's 288.00m. LUN is a thin provisioned LUN made from qcow2 zfs, so maybe it only reports the size that are used? Anyway, I just added a second LUN, for using as VM storage. Here you can see: [root@node1 admin]# cat /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: RW/DVD GCC-T10N Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: OI Model: COMSTAR Rev: 1.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 00 Lun: 01 Vendor: OI Model: COMSTAR Rev: 1.0 Type: Direct-Access ANSI SCSI revision: 05 [root@node1 admin]# But when I run pvs again in the HV, the new LUN doesn't show up. Note that I restarted the HV, because I ran pvs also before restarting it, and thought I needed to restart it for beeing able to see it through LVM. But LVM haven't yet touched it, or perhaps not seen it? Is it so that LVM on the HV doesn't see other LUN's than the first LUN, if it is not there during installation? Last time I installed, I did the opposite, I installed with system LUN and with data LUN, and then LVM could see both LUN's, though I couldn't use the data LUN for storage. I've allready reported that. So I wonder what is the right way of doing it, install with only system LUN and than add data LUN after, or install with both system LUN and data LUN? I suppose it would be the best if both way's worked? I get back with more info later, when I tried to connect the storage LUN through the engine... Rgrds Johan

1 0

Re: [Users] error ISO domain
by Royce Lv 01 Aug '12

01 Aug '12

Shall we put the "activate" in the right click or in the "Storage page"? I know it seems natural for developers, but our users may spend some time to find the subtab activate button...

2 1

[Users] Add user error.
by victor nunes 31 Jul '12

31 Jul '12

I'm trying to create a User, going in the Users tab and then clicking add, however, no field appears to me to fill out, just the option to search user. This is some error oVirt? Att, Victor -- “Encarada do ponto de vista da juventude, a vida parece um futuro indefinidamente longo, ao passo que, na velhice, ela parece um passado deveras curto. Assim, a vida no seu início se apresenta do mesmo modo que as coisas quando as olhamos através de um binóculo usado ao contrário; mas, ao seu final, ela se parece com as coisas tal qual são vistas quando o binóculo é usado de modo normal. Um homem precisa ter envelhecido e vivido bastante para perceber como a vida é curta”. (Poema de Arthur Schopenhauer)

2 1

[Users] F17 vdsm bootstrap_complete trouble
by Ryan Harper 31 Jul '12

31 Jul '12

I'm having trouble getting a F17 system[1] added to engine[2]. The symtoms are in the engine UI, it says the install falls. I'm using the latest rpms[3] On the end-point, the bootstrap log shows success. However, when I attempt to test the vdsm install with: vdsClient -s 0 getVdsCaps I get a nice ssl error: [root@hungerforce tmp]# vdsClient -s 0 getVdsCaps Traceback (most recent call last): File "/usr/share/vdsm/vdsClient.py", line 2275, in <module> code, message = commands[command][0](commandArgs) File "/usr/share/vdsm/vdsClient.py", line 403, in do_getCap return self.ExecAndExit(self.s.getVdsCapabilities()) File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__ return self.__send(self.__name, args) File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request verbose=self.__verbose File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request return self.single_request(host, handler, request_body, verbose) File "/usr/lib64/python2.7/xmlrpclib.py", line 1292, in single_request self.send_content(h, request_body) File "/usr/lib64/python2.7/xmlrpclib.py", line 1439, in send_content connection.endheaders(request_body) File "/usr/lib64/python2.7/httplib.py", line 954, in endheaders self._send_output(message_body) File "/usr/lib64/python2.7/httplib.py", line 814, in _send_output self.send(msg) File "/usr/lib64/python2.7/httplib.py", line 776, in send self.connect() File "/usr/lib/python2.7/site-packages/vdsm/SecureXMLRPCServer.py", line 98, in connect cert_reqs=self.cert_reqs) File "/usr/lib64/python2.7/ssl.py", line 381, in wrap_socket ciphers=ciphers) File "/usr/lib64/python2.7/ssl.py", line 141, in __init__ ciphers) SSLError: [Errno 185090050] _ssl.c:340: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib This problem is because not all of the ssl certs for vdsm are present. On a working host: [root@ichigo-dom226 tmp]# find /etc/pki/vdsm -type f /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/keys/libvirt_password /etc/pki/vdsm/keys/dh.pem /etc/pki/vdsm/keys/vdsmkey.pem On the host with the error: [root@hungerforce tmp]# find /etc/pki/vdsm -type f /etc/pki/vdsm/keys/dh.pem /etc/pki/vdsm/keys/libvirt_password /etc/pki/vdsm/keys/vdsmkey.pem As it turns out: /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/certs/vdsmcert.pem These files are generated from: /usr/libexec/vdsm/vdsm-gencerts.sh which is invoked by: deployUtils.instCert() which is called by: vds_bootstrap_complete.py So... the question is: why isn't vds_bootstrap_complete.py getting invoked? Also, if I re-run the vdsm-gencerts.sh and validate my certificates I can get vdsm to work properly on the host (vdsClient -s works)... then if I go to engine and attempt to Activate, it just say the host is non-responsive... re-installing re-breaks vdsm since it doesn't generate the SSL certs. 1. [root@hungerforce tmp]# rpm -qa | egrep "(vdsm|libvirt)" vdsm-4.10.0-5.fc17.x86_64 vdsm-python-4.10.0-5.fc17.x86_64 libvirt-daemon-config-nwfilter-0.9.11.4-3.fc17.x86_64 libvirt-daemon-0.9.11.4-3.fc17.x86_64 libvirt-lock-sanlock-0.9.11.4-3.fc17.x86_64 vdsm-xmlrpc-4.10.0-5.fc17.noarch vdsm-cli-4.10.0-5.fc17.noarch libvirt-0.9.11.4-3.fc17.x86_64 libvirt-daemon-config-network-0.9.11.4-3.fc17.x86_64 libvirt-client-0.9.11.4-3.fc17.x86_64 libvirt-python-0.9.11.4-3.fc17.x86_64 2. [root@bebop ~]# rpm -qa | egrep "(ovirt-engine|vdsm)" ovirt-engine-dbscripts-3.1.0-1.fc17.noarch ovirt-engine-userportal-3.1.0-1.fc17.noarch ovirt-engine-genericapi-3.1.0-1.fc17.noarch ovirt-engine-cli-3.1.0.6-1.fc17.noarch ovirt-engine-backend-3.1.0-1.fc17.noarch ovirt-engine-notification-service-3.1.0-1.fc17.noarch ovirt-engine-3.1.0-1.fc17.noarch vdsm-bootstrap-4.10.0-5.fc17.noarch ovirt-engine-webadmin-portal-3.1.0-1.fc17.noarch ovirt-engine-restapi-3.1.0-1.fc17.noarch ovirt-engine-config-3.1.0-1.fc17.noarch ovirt-engine-sdk-3.1.0.4-1.fc17.noarch ovirt-engine-tools-common-3.1.0-1.fc17.noarch ovirt-engine-setup-3.1.0-1.fc17.noarch 3. http://ovirt.org/releases/3.1/rpm/Fedora/17/ -- Ryan Harper Software Engineer; Linux Technology Center IBM Corp., Austin, Tx ryanh(a)us.ibm.com

2 2

[Users] Fwd: error ISO domain
by victor nunes 31 Jul '12

31 Jul '12

---------- Forwarded message ---------- From: victor nunes <victor.rebli(a)gmail.com> Date: 2012/7/31 Subject: Re: [Users] error ISO domain To: Itamar Heim <iheim(a)redhat.com> I'm sorry I went to see that there was the option to activate later. I enabled it and it worked. 2012/7/29 Itamar Heim <iheim(a)redhat.com> > On 07/29/2012 11:32 PM, victor nunes wrote: > >> Inactive. >> > > what happens when you activate it (under DC --> storage sub tab)? > > >> 2012/7/29 Itamar Heim <iheim(a)redhat.com <mailto:iheim@redhat.com>> >> >> >> On 07/29/2012 07:50 AM, victor nunes wrote: >> >> Hello, I'm having the following error after trying to insert an >> ISO >> storage domain. >> >> Failed to refresh the following Iso domains : ISO1 (Floppy file >> type). >> Please check domain activity >> Failed to refresh the following Iso domains : ISO1 (ISO file >> type). >> Please check domain activity. >> >> What log files can I search a clue to try to solve it? >> >> >> ovirt engine log and the vdsm log on the SPM host (or the single >> host you have). >> what is the status of the iso domain in the relevant data center? >> >> >> Att, >> >> >> Victor >> >> -- >> “Encarada do ponto de vista da juventude, a vida parece um futuro >> indefinidamente longo, ao passo que, na velhice, ela parece um >> passado >> deveras curto. Assim, a vida no seu início se apresenta do mesmo >> modo >> que as coisas quando as olhamos através de um binóculo usado ao >> contrário; mas, ao >> seu final, ela se parece com as coisas tal qual são vistas >> quando o >> binóculo >> é usado de modo normal. Um homem precisa ter envelhecido e vivido >> bastante para perceber como a vida é curta”. >> >> (Poema de Arthur Schopenhauer) >> >> >> ______________________________**___________________ >> Users mailing list >> Users(a)ovirt.org <mailto:Users@ovirt.org> >> http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users> >> >> <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users> >> > >> >> >> >> >> >> >> -- >> “Encarada do ponto de vista da juventude, a vida parece um futuro >> indefinidamente longo, ao passo que, na velhice, ela parece um passado >> deveras curto. Assim, a vida no seu início se apresenta do mesmo modo >> que as coisas quando as olhamos através de um binóculo usado ao >> contrário; mas, ao >> seu final, ela se parece com as coisas tal qual são vistas quando o >> binóculo >> é usado de modo normal. Um homem precisa ter envelhecido e vivido >> bastante para perceber como a vida é curta”. >> >> (Poema de Arthur Schopenhauer) >> > > > -- “Encarada do ponto de vista da juventude, a vida parece um futuro indefinidamente longo, ao passo que, na velhice, ela parece um passado deveras curto. Assim, a vida no seu início se apresenta do mesmo modo que as coisas quando as olhamos através de um binóculo usado ao contrário; mas, ao seu final, ela se parece com as coisas tal qual são vistas quando o binóculo é usado de modo normal. Um homem precisa ter envelhecido e vivido bastante para perceber como a vida é curta”. (Poema de Arthur Schopenhauer) -- “Encarada do ponto de vista da juventude, a vida parece um futuro indefinidamente longo, ao passo que, na velhice, ela parece um passado deveras curto. Assim, a vida no seu início se apresenta do mesmo modo que as coisas quando as olhamos através de um binóculo usado ao contrário; mas, ao seu final, ela se parece com as coisas tal qual são vistas quando o binóculo é usado de modo normal. Um homem precisa ter envelhecido e vivido bastante para perceber como a vida é curta”. (Poema de Arthur Schopenhauer)

1 0

[Users] Host installation failed with error "Unable to set host time"
by Daniel Yeung 31 Jul '12

31 Jul '12

--_000_1A227AB7CE832943A98BD4C4E197832D071840TCSEXCH1tcsseccom_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I created a new host and the installation failed with the following message= s on the engine.log: <BSTRAP component=3D'SetSSHAccess' status=3D'OK' message=3D'SUCCESS'/> <BSTRAP component=3D'SET_SYSTEM_TIME' status=3D'FAIL' message=3D'Unable to = set host time.'/> <BSTRAP component=3D'RHEV_INSTALL' status=3D'FAIL'/> . Error occured. (Stage: Running first installation script on Host) 2012-07-31 15:28:06,530 INFO [org.ovirt.engine.core.utils.hostinstall.Mina= InstallWrapper] (pool-5-thread-4) RunSSHCommand returns true 2012-07-31 15:28:06,530 INFO [org.ovirt.engine.core.bll.VdsInstaller] (poo= l-5-thread-4) RunScript ended:true 2012-07-31 15:28:06,530 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (poo= l-5-thread-4) Installation of 192.168.4.125. Operation failure. (Stage: Run= ning first installation script on Host) 2012-07-31 15:28:06,531 INFO [org.ovirt.engine.core.bll.InstallVdsCommand]= (pool-5-thread-4) After Installation pool-5-thread-4 2012-07-31 15:28:06,532 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatus= VDSCommand] (pool-5-thread-4) START, SetVdsStatusVDSCommand(vdsId =3D 1001e= 89e-db3f-11e1-99f0-bbd8c818bb29, status=3DInstallFailed, nonOperationalReas= on=3DNONE), log id: 3b08378 2012-07-31 15:28:06,544 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatus= VDSCommand] (pool-5-thread-4) FINISH, SetVdsStatusVDSCommand, log id: 3b083= 78 Here are the vdsm related rpms in my Fedora 16 system. vdsm-4.9.3.3-0.fc16.x86_64 vdsm-bootstrap-4.9.3.3-0.fc16.noarch vdsm-cli-4.9.3.3-0.fc16.noarch Does anyone encounter the same problem? Any hints? Thank you. DY --_000_1A227AB7CE832943A98BD4C4E197832D071840TCSEXCH1tcsseccom_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html dir=3D"ltr"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <style id=3D"owaParaStyle" type=3D"text/css">P {margin-top:0;margin-bottom:= 0;}</style> </head> <body ocsi=3D"0" fpstyle=3D"1"> <div style=3D"direction: ltr;font-family: Tahoma;color: #000000;font-size: = 10pt;">I created a new host and the installation failed with the following = messages on the engine.log: <BSTRAP component=3D'SetSSHAccess' status=3D'OK' message=3D'SUCCESS'/&gt= ; <BSTRAP component=3D'SET_SYSTEM_TIME' status=3D'FAIL' message=3D'Unable = to set host time.'/> <BSTRAP component=3D'RHEV_INSTALL' status=3D'FAIL'/> . Error occured. (Stage: Running first installation script on Host) 2012-07-31 15:28:06,530 INFO  [org.ovirt.engine.core.utils.hostinstall= .MinaInstallWrapper] (pool-5-thread-4) RunSSHCommand returns true 2012-07-31 15:28:06,530 INFO  [org.ovirt.engine.core.bll.VdsInstaller]= (pool-5-thread-4)  RunScript ended:true 2012-07-31 15:28:06,530 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (poo= l-5-thread-4) Installation of 192.168.4.125. Operation failure. (Stage: Run= ning first installation script on Host) 2012-07-31 15:28:06,531 INFO  [org.ovirt.engine.core.bll.InstallVdsCom= mand] (pool-5-thread-4) After Installation pool-5-thread-4 2012-07-31 15:28:06,532 INFO  [org.ovirt.engine.core.vdsbroker.SetVdsS= tatusVDSCommand] (pool-5-thread-4) START, SetVdsStatusVDSCommand(vdsId =3D = 1001e89e-db3f-11e1-99f0-bbd8c818bb29, status=3DInstallFailed, nonOperationa= lReason=3DNONE), log id: 3b08378 2012-07-31 15:28:06,544 INFO  [org.ovirt.engine.core.vdsbroker.SetVdsS= tatusVDSCommand] (pool-5-thread-4) FINISH, SetVdsStatusVDSCommand, log id: = 3b08378 Here are the vdsm related rpms in my Fedora 16 system. vdsm-4.9.3.3-0.fc16.x86_64 vdsm-bootstrap-4.9.3.3-0.fc16.noarch vdsm-cli-4.9.3.3-0.fc16.noarch Does anyone encounter the same problem?  Any hints? Thank you. DY </div> </body> </html> --_000_1A227AB7CE832943A98BD4C4E197832D071840TCSEXCH1tcsseccom_--

2 1

[Users] Call for Agenda Items -- oVirt Weekly Meeting 2012-08-01
by Mike Burns 31 Jul '12

31 Jul '12

Meeting Time and Place oVirt Weekly Sync * Wednesdays @ 15:00 UTC (may change during DST changes) - always at 7:00am US Pacific, 10:00am US Eastern. * To see in your timezone date -d 'WEDNESDAY 1000 EDT' * On IRC: #ovirt on irc.oftc.net This is the agenda for the 2012-08-01 meeting: * Status of Next Release * Sub-project reports (engine, vdsm, node, infra) * Upcoming workshops If you have other topics, please reply to me and I will add them to the agenda. If you propose a topic, please be prepared to lead the discussion during the meeting. Thanks Mike

1 0

Re: [Users] Can't add a host to a 2.2 compatibilty level cluster
by Nicholas Kesick 31 Jul '12

31 Jul '12

--_4115f533-a1da-4990-ae7f-da34fbe142ad_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable > Date: Tue=2C 31 Jul 2012 09:07:07 +0300 > From: iheim(a)redhat.com > To: cybertimber2000(a)hotmail.com > CC: users(a)ovirt.org > Subject: Re: [Users] Can't add a host to a 2.2 compatibilty level cluster >=20 > On 07/31/2012 03:11 AM=2C Nicholas Kesick wrote: > > I am unable to add a host to a 2.2 compatibilty level cluster. I'm > > trying to add a host to that because it is a Pentium D system (which > > supports virtualization and 64-bit)=2C and NetBurst is only available i= n > > 2.2 w/o a database edit. > > Webadmin events shows "Host oVirtNode22 is compatible with versions > > (3.0=2C3.1) and cannot join Cluster Legacy22 which is set to version 2.= 2." > > > > I don't see an area to set host compatibility level=2C so any suggestio= ns? > > When I try to add it to a 3.0/3.1 cluster=2C it reports missing cpu fla= gs: > > model_Conroe >=20 > there is no ovirt 2.2 version node/vdsm. > 2.2 is a legacy of a previous version of rhev=2C and expected to be remov= e. > if you want to use an older host=2C i suggest you change the db to allow = it. =20 Ahh I didn't think about it that way (node compatibility). It makes sense n= ow. I'll try working on the DB edit again (or getting newer computers). Thanks Itamar=2C =20 - Nick >=20 > > > > Thanks=2C > > - Nick > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > >=20 >=20 = --_4115f533-a1da-4990-ae7f-da34fbe142ad_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'> <style></style>&gt=3B Date: Tue=2C 31 Jul 2012 09:07:07 +0300 &gt=3B From: i= heim(a)redhat.com &gt=3B To: cybertimber2000(a)hotmail.com &gt=3B CC: use= rs(a)ovirt.org &gt=3B Subject: Re: [Users] Can't add a host to a 2.2 compa= tibilty level cluster &gt=3B &gt=3B On 07/31/2012 03:11 AM=2C Nichol= as Kesick wrote: &gt=3B &gt=3B I am unable to add a host to a 2.2 compat= ibilty level cluster. I'm &gt=3B &gt=3B trying to add a host to that bec= ause it is a Pentium D system (which &gt=3B &gt=3B supports virtualizati= on and 64-bit)=2C and NetBurst is only available in &gt=3B &gt=3B 2.2 w/= o a database edit. &gt=3B &gt=3B Webadmin events shows "Host oVirtNode22= is compatible with versions &gt=3B &gt=3B (3.0=2C3.1) and cannot join C= luster Legacy22 which is set to version 2.2." &gt=3B &gt=3B &gt=3B &g= t=3B I don't see an area to set host compatibility level=2C so any suggesti= ons? &gt=3B &gt=3B When I try to add it to a 3.0/3.1 cluster=2C it repor= ts missing cpu flags: &gt=3B &gt=3B model_Conroe &gt=3B &gt=3B th= ere is no ovirt 2.2 version node/vdsm. &gt=3B 2.2 is a legacy of a previ= ous version of rhev=2C and expected to be remove. &gt=3B if you want to = use an older host=2C i suggest you change the db to allow it. &nbsp=3B<b= r>Ahh I didn't think about it that way (node compatibility). It makes sense= now. I'll try working on the DB edit again&nbsp=3B(or getting newer comput= ers). Thanks Itamar=2C &nbsp=3B - Nick &gt=3B &gt=3B &gt=3B= &gt=3B &gt=3B Thanks=2C &gt=3B &gt=3B - Nick &gt=3B &gt=3B &gt= =3B &gt=3B &gt=3B &gt=3B _______________________________________________= &gt=3B &gt=3B Users mailing list &gt=3B &gt=3B Users(a)ovirt.org &g= t=3B &gt=3B http://lists.ovirt.org/mailman/listinfo/users &gt=3B &gt=3B<= br>&gt=3B &gt=3B </div></body> </html>= --_4115f533-a1da-4990-ae7f-da34fbe142ad_--

1 0